With "Apply to the whole document" ticked, OK sends noProof only if the user
changed it from the dialog's opening value, and lang if changed or if neither
changed (never the engine's en-US default). Heading reads "Mark the whole
document as:" while ticked. Glossary walker uses doc's PARA_WALK_DEPTH (now pub).
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCVCCEo7u5wetHaJRU4
review.language takes scope "selection" (default, unchanged) or "document":
every run and paragraph mark of every story (body, headers, footers, notes,
comments, text boxes, table cells, glossary) takes lang/noProof in one undo
step, selection unchanged, pending typing format follows. The Language dialog
gets an "Apply to the whole document" check box.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCVCCEo7u5wetHaJRU4
* #5710: the Print panel lists printers without asking their drivers
On Windows the printer list waited until every printer's driver said
whether it prints on both sides. A networked printer in power save can
hold that query for a long time, so the list stayed empty and Refresh
stayed unavailable. WordCraft never used the answer.
Discovery now uses craft-print's printer_queues, which lists the same
queues and default without asking any driver (storytold/craft-libs#618).
Printing still checks the job's options with the driver. Only the
craft-print pin moves; craft-ui doesn't depend on it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #5710: the docs say what is proven, not that the sleeping printer is fixed
Review: the progress log and gap rows stated the reported outcome as
certain, but the sleeping network printer hasn't been retested. They now
say the driver query is removed and the reported printer awaits retest.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #5710: craft-print pin moves to the merge of storytold/craft-libs#618
e653048 is craft-libs main's merge of #618; crates/print is identical
to the reviewed and tested head 81c2488.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #5710: a print job waiting on its driver can be cancelled, and quitting doesn't wait for it
On Windows a print job asks the printer's driver for its capabilities
before it is sent, and a networked printer in power save can hold that
query for a long time. The Print page stayed locked until the driver
answered, and quitting waited for the job before saving preferences
(CodeRabbit on #5732).
Each job now carries a craft-print Cancel token. Cancel printing
(ui.printCancel) stops a job that hasn't started reaching the spooler,
so it is never sent, and frees the Print page with the settings kept;
a job already being sent completes, and the page says to cancel it
from the system's queue. Quitting cancels jobs still waiting and waits
only for jobs already being sent.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #5710: quitting cancels every waiting print job before it waits; Cancel asks the active job
Review: quitting cancelled and waited for jobs one by one, so a job left
waiting while an earlier one was being sent could start sending
meanwhile. Every job is now cancelled first, then only those already
being sent are waited for. Cancel printing asked every unfinished job,
so a job that had just been sent could be reported as cancelled and its
receipt lost; it now asks the job being submitted, which answers that it
was already sent.
The tests cover both orders, junk parameters for ui.printCancel, and the
kept printer list and status message.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #5710: craft-print pin moves to storytold/craft-libs#622 for submit_cancellable
85c8ca1 is #622's head (craft-libs main e653048 plus the Cancel token);
it moves to #622's merge on craft-libs main before this merges.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #5710: craft-print pin follows storytold/craft-libs#622 (230d522)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #5710: pin craft-print to merged cancellation fix
* #5710: allow print cancellation after closing the document
* #5710: correct print-cancellation status date
* #5710: clarify when a print job cannot yet be cancelled in the queue
* #5710: isolate Windows print submissions in cancellable helper processes
* #5710: strengthen helper retry and crash-cleanup regressions
* #5710: erase helper inputs before driver work
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Table formulas: read the Panamanian balboa B/. in numbers
Word's table formula and sort number reader ignores a currency sign or short currency word around a number; the balboa's B/. was not in the list. Add it as a whitespace-delimited sign, as Word reads it: B/. 1,250.50 and 1,250.50 B/. are numbers, while B/.1,250.50 and B/ 1,250.50 are not. Tested in the locale reader and through =SUM(ABOVE); the localization parity doc records the behaviour.
* Table formulas: read the balboa cell in the document's language
The formula test summed a B/. cell through ev, which supplies no document
or language, so a regression in locale selection could pass. Evaluate
=SUM(ABOVE) with a document whose default text is es-PA and a pl-PL
editing language: 1,250.50 is a number under es-PA and not under pl-PL,
so the assertion fails if the formula stops consulting the cell's
language. The converse case reads B/. 1 250,50 from a pl-PL document with
an en-US fallback, which English alone cannot parse.
* docs: close the parenthesis in the localization-parity change note (#3546)
---------
Co-authored-by: Francisco Herrera <14956584+alosslessdev@users.noreply.github.com>
Co-authored-by: FredApps <FredApps@users.noreply.github.com>
* WC6-06: preserve adjustRightInd in DOCX
* WC6-06: honor grid indent defaults and XML order
* Update lockfile for DOCX test dependency
* Format DOCX ordering assertion
* Keep main lockfile for paragraph property PR
* PR 5384: tighten grid indent docs and regression
* PR 5384: match paragraph check formatting
The transports, the message types and the origin checks come from the shared crate (storytold/craft-libs#420); WordCraft keeps the host save and dirty hooks, the saveAs rule, the open size limit and the author.
data-host="page" on the canvas opts a page that loads the module into its own document into the host bridge. The ?host=parent messages travel as non-bubbling CustomEvents on the canvas; the bridge holds a Transport (Parent or Page) with one send, and the open, save, dirty, ready and failure handling is shared. ?host=parent is checked first and unchanged, including no bridge for an unframed page. The hosting guide documents both modes.
* docbin: a field's cached result keeps its formatting per run, not per character (#5477)
The result was a Vec<(char, CharProps)>: 365 bytes per character, 1.44 GB
at peak for a 4 MB file with one field. It is now a String plus a run
list that gains an entry only when the formatting changes (25 MB peak
for the same file). Output is unchanged.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* docbin: show the objects when the field-result test fails
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
`comment_export_discovery_scales_with_unrelated_markers` timed `notes` on 2,000 and 16,000
markers through /proc/thread-self/schedstat. That count moves only at a scheduler tick or switch,
so a 17 µs baseline read as nothing or a whole tick, and gate failed on linear code (58.68x on
PR #3228's run 41932894607). As #5608 did for the balloon anchors, the test now counts the
characters the walk visits (`wordcraft_doc::work`): 4,010 -> 32,010 steps, 8.0x, every run. A
prefix scan per marker injected into `notes` counts 63.9x and fails it.
`work::steps` becomes public so a crate that walks a paragraph's text itself can count it; outside
tests it is still nothing.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Alt codes type their character in Find and other text boxes (#4403)
Alt+numpad codes worked only on the page. In a text box (Find what,
Replace with, a dialog's field) the digits were typed instead on Linux,
which sends their text with Alt held; on Windows the box got only what
the system composes, a byte for a code above 255.
A pass before the frame is drawn now gives the focused text box the
same codes as the page: the digits' text is dropped, letting go of Alt
types the character the code names in the same code pages, and a
platform's own composed character is not typed twice (up to 255 the
system's replaces ours, as on the page).
* Alt codes in text boxes: letting go of Alt ends the digits' text
The flag that drops a digit's own text stayed set when no text came
for the last digit, so the first text after the release was lost: on
Windows the system's composed character for a code we name no
character for (CodeRabbit), and on Linux whatever followed a frame
whose digits sent no text (CI). A digit's text comes with its key,
before Alt is let go, so the release now clears the flag everywhere.
* docbin: cap paragraph and cell marks, keep the table context only for table marks (#5476)
The walk budget counts characters, not paragraphs, so a file made of
paragraph marks grew memory about 2,000 times faster than its size
(4 MB of marks: 9.4 s, 8.4 GB peak). Marks now draw on one document-wide
cap (2,000,000, all stories together); past it the read returns
DocbinError::Limit. A ParaOut no longer embeds the 296-byte RowInfo of a
table mark: it is an optional box, present only for table marks.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* docbin: say what the paragraph cap bounds; name the budget test for what it checks
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* docbin: refuse an exhausted paragraph budget before assembling a story (review point)
CodeRabbit pointed out that the header, footnote, endnote and text box walks
assembled their partial paragraph lists before the budget check, a transient
memory peak. They now share story_blocks, which checks first.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* docbin: test that the paragraph cap is shared by the body and a footnote (review nitpick)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* docbin test: review fixes (assert empty pairs, comment wording)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* Content controls: a press on the drop-down list button no longer moves the caret (#5389)
The list button hangs over whatever follows the control. The canvas put the
caret under the pointer first, which left the control, and the list closed in
the frame it opened. A press on the button now skips the caret move.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Content controls: only a press that began on the list button skips the caret move (#5389)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Content controls: a press and release in one frame, and a table tool, no longer hit the button guard (review points)
CodeRabbit pointed out that egui clears press_origin when a press and its
release arrive in the same frame, so the caret still moved off the control and
closed the list; the press is now also read from the frame's events. It also
pointed out that the guard ran before the table pen, so a stroke could not
start over the button; the guard is skipped while a table tool is on.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Content controls: feed the same-frame press and release as one frame in the test
Harness::event runs one frame per event, so the earlier version of the test did
not exercise the single-frame case.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* M6: preserve numbered REF results during field updates
Adapt and validate the patch published in WordCraft #4533, retaining main's bounded numbering renderer and adding relative-context/cache guards.
Co-authored-by: Alyosha-dot-shop <218732667+Alyosha-dot-shop@users.noreply.github.com>
* M6: reuse bookmark lookup for numbered REF updates
* REF: use explicit imports for the workspace clippy gate
* #4609: adapt synthetic fixtures to shared document data
* #4609: checkpoint review fixes and isolated validation notes
* #4609: retain rendered REF labels and isolate relative context by list
---------
Co-authored-by: Alyosha-dot-shop <218732667+Alyosha-dot-shop@users.noreply.github.com>
Co-authored-by: Martin Ball <martin.ball@ucscaregroup.co.uk>
* Mini toolbar: hovering a formatting button previews it on the selection (#4664)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Keep mini toolbar stable during alignment preview
* Track live mini toolbar anchor during preview
* Mini toolbar: hovering a font, size, highlight or font colour previews it (#4664)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Mini toolbar preview: the page holds its scroll position (#4664)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Mini toolbar: hovering the highlight and font colour buttons previews their colour (#4664)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Mini toolbar: the font list and colour menus mark the choice in effect (#4664)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Skip hover previews in context toolbar
* Pass preview mode in toolbar test
* Font list: a picked family keeps its place until the list next opens (#4664)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Font and size lists close when an entry is picked (#4664)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Mini toolbar: a clicked button holds its preview until the pointer leaves (#4664)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Mini toolbar: a button already on does not preview (#4664)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Alignment buttons follow the paragraph a selection covers; a toggle previews its undo on return (#4664)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Font list: a recent family is marked as chosen in Recently Used Fonts only (#4664)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
Co-authored-by: Fluorine <joseph.anglada92@gmail.com>
* #3614: reuse paragraph-prefix lookups during ink discovery
* Update ink lookup status date (#3614)
---------
Co-authored-by: Martin Ball <martin.ball@ucscaregroup.co.uk>
* Let every credits column be dragged, and refit changed tables
The last column was egui's remainder column, which has no drag handle, so
it could only be resized from the edge before it. It is now an ordinary
column with its own handle.
A table keeps its column widths, so switching to a longer name left the
Name column at its old width and clipped the text. The table now goes
back to the opening fit whenever that fit changes: a longer widest cell
or a resized window. Dragged widths are dropped at that point.
fit_widths could overflow the room when one column hit the minimum,
because the other columns did not take up its share. Columns now give
way in proportion to their width above the minimum.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Refit credits tables on what they measure, not the fitted widths
Comparing the fitted widths missed the case it was meant for. Name is the
only growing column, so a longer name takes its extra width from the
spare room and the fit comes out the same: a dragged Name width stayed,
clipping the longer name.
It could also drop dragged widths by accident. The fit comes from the
available width inside the scroll area, which scrolling can nudge, so
scrolling a widened table could reset it.
The table now compares the natural widths and the clip rect's width,
which scrolling does not move.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The page the section before ends on is finished with its own margins and
footnote separators before the starting section's replace them, so the
footnotes pending on it are placed where the page they sit on says.
Co-authored-by: rahul05ranjan <11793455+rahul05ranjan@users.noreply.github.com>
* docx: keep a paragraph's text alignment
w:textAlignment (ECMA-376 17.3.1.39) was not read, so a save dropped it. Word sizes a line by it when a
list's bullet is larger than the text: without it, those lines grow and every page after them moves.
ParaProps gains text_alignment, read and carried through styles, and written back after w:jc. Kept for
the file only; the layout does not use it yet.
* contributors: add entropybeater
---------
Co-authored-by: Brian <255903314+entropybeater@users.noreply.github.com>
Spelling as you type now notes that a web or e-mail address after a
no-break, narrow no-break (U+202F), figure (U+2007) or ideographic space
is not marked while Ignore web and file addresses is on, as
address_after_a_wide_space_is_an_internet_token in craft-proof checks.
* doc, docx: keep the compound border lines
The nine thin and thick compound lines (thinThickSmallGap to thinThickThinLargeGap, ECMA-376 17.18.2)
were read as a single line and written back as one, on paragraphs, tables, cells and pages. BorderStyle
gains them; they are written back by name and drawn as a single line of the border's width, as before.
RTF export and import carry them too (the importer read four of them as double).
* contributors: add entropybeater
---------
Co-authored-by: Brian <255903314+entropybeater@users.noreply.github.com>
metafile_size() parsed the whole metafile, decoding every bitmap and building every path, to
read two numbers at picture insert and replace. A new wordcraft_metafile::size reads the frame
from the EMF header or the placeable WMF header, and falls back to the full parse for every
other file (plain WMF, an EMF without a usable frame, a file with no records), so it returns
what parse would. For an EMF with one 8000x5000 1 bpp bitmap the size now costs well under a
microsecond instead of about 280 ms.
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
decode_clip matched the bit depth, bounds-checked and (for 16 and 32 bpp) divided per channel
for every pixel. The depth, palette and masks are now turned into a row decoder once per
bitmap: a 256-entry colour table for 1/4/8 bpp, plain channel swaps for 24 bpp and default
32 bpp, and precomputed shifts and scale tables for masked 16/32 bpp. Output is byte for byte
the same; the old per-pixel code stays in the tests as the reference.
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
decode_clip only capped width x height at 40 MP. A 32 x 1,250,000 pixel 1 bpp bitmap (about
5 MB in the file) was decoded to 160 MB of RGBA and kept, then dropped by Item::take_pixels
because its side is over MAX_BITMAP_SIDE, while counting against the parse's 256 MB budget.
decode_clip now returns None when the clipped width or height is over the cap, so crops of a
large bitmap that fit still decode.
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* Pin that a comment id past u32 is refused, not truncated (#3677)
`validate_comment_id` refuses an `id` that does not fit a `u32`, so the `as
u32` casts behind it can no longer reach another comment -- but nothing pinned
it, and the casts are still there to be reached if the guard moves.
The ids the test sends are the ones that would alias onto real comments if the
truncation came back: 2^32 truncates to 0 (and the first comment is 0), 2^32 +
id to that comment, 4294967301 to 5 as the report describes, and u64::MAX to
u32::MAX. Each of the four commands that take an id is tried with each, then
the comments are checked to be unchanged and unresolved, and a valid id is
accepted afterwards so the guard is shown to be a range check rather than a
refusal.
* Comment ids: the values past u32 go in the existing invalid-id test, refused by the range check
anchors_walk_dense_unrelated_markers_in_linear_work compared CPU times of
a few microseconds, so cache and timer noise could push the ratio past its
24x limit on a linear walk (43.52x in a CI run).
wordcraft-doc now counts, in tests only, the characters its paragraph
object lookups walk (objects_before, object_offsets and
objects_with_offsets), through a work::count helper behind the existing
test-support feature. The test asserts that 8x the markers take at most
12x the steps, as the layout linear-time tests do: the walk takes 2001 ->
16001 steps (8.0x), and the object_offsets + object_at walk it replaced
takes 2003001 -> 128024001 (63.9x).
update_generated now keeps what comes before a wrapped list's field, which can be
another list field; rebuild from the converted field's code instead of the
paragraph's first list field, and let index::rebuild_from take that code.
- update_generated keeps what precedes a wrapped list's field (r4468529243)
- from_doc keeps objects in hidden text when hidden text is written (r4469018820)
- clipped cell lines in a turned frame are drawn once, clipped, turned (r4469018900)
- kept::while_writing works out reply map and page fingerprint once per export (r4468529227)
- odt_charts fixture declares its namespaces (r4468529259)
- guard test for character styles based on a missing parent (r4469018843, not a bug)
* Arabic interface: mirrored right-to-left window and Arabic UI fonts
Adds the Arabic (`ar`) interface language's code: its catalogs are craft-i18n's
`locales/ar`, so this changes no catalog.
- `ar` is registered in `i18n::LANGUAGES` and `Lang::rtl()` says it is written
right to left; its translations are used as written (egui's text layout
orders each line's bidi text itself). A ribbon location reads from the right
with a leftwards mark.
- `rtl.rs`: the window is mirrored. Containers open in `rtl::root`; columns,
grids, checkboxes, radio buttons, menus, rows, panels, the dialog tab strip
and the ribbon's scrolling row follow the language's direction. Title bar,
status bar, ribbon tabs and groups, File pages (including Print, with the
settings on the right and a solid scrollbar gutter), dialogs, menus and the
task panes (their docking edge swaps) are laid out from the right. egui's
`Grid` panics in a right-aligned layout, so grids go through `rtl::grid`.
- Arabic UI font fallback: the craft-fonts Arabic face, else an installed
Arabic font, loaded when the interface is Arabic.
- The "Auto (200%)" size label keeps its percent sign inside the isolated
number.
- Tests: Arabic locale, saved preference and lookup order on fixture catalogs;
an interface audit (skipped without the craft-i18n Arabic catalog) that lays
the app out right to left at several widths, checks tab, group, pane, Print
and Go To positions and that nothing panics.
The Arabic work builds on Abdelhaq El Amraoui's mirrored-interface PR (#737).
Co-Authored-By: Abdelhaq El Amraoui <abdelhaqelamraoui@gmail.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: pin craft-i18n at a commit with the Arabic catalog; review fixes
- craft-i18n.rev and the Flatpak manifest pin 19358491 (craft-i18n main), the
first commit line that has locales/ar/wordcraft.tsv. The old pin had no
Arabic catalog, so `ar` was registered but not embedded and two i18n tests
(the_language_setting_is_a_ui_command_and_persists,
the_languages_offered_are_the_embedded_ones_of_the_list) failed in CI.
- The Arabic font fallback is requested for any right-to-left interface
(`Lang::rtl()`), not only after the language picker sets the flag, so an
automatic or saved Arabic gets the installed Arabic face.
- The file browser, the update window and Reading Mode's toolbar run their
bodies in `rtl::root`, so their far-side buttons and rows are mirrored.
- A group in a right-to-left ribbon row is measured from the right edge: the
cursor's left edge is negative infinity there, so its width was NaN and the
ribbon planner dropped every group, never compacting a narrow Arabic window.
A narrow window now folds groups into drop-downs.
- The mirrored checkbox and radio marks are labelled by their text, so screen
readers name them.
- Tests: group width in a right-to-left row; the Arabic interface audit checks
Reading Mode's toolbar.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: ask for the installed Arabic font separately from the CJK one
A previous commit made every right-to-left interface request the installed CJK
fallback font (`system_cjk`) so that the installed Arabic font would load. That
also made every Arabic launch read a large system CJK font file when no
craft-fonts input is embedded (the Flatpak build has none).
`install_ui_fonts` now passes a separate `system_arabic` flag (`Lang::rtl()`):
the installed Arabic font is read for it, and `system_cjk` is again set only
by a CJK interface or by CJK text on screen. `WordApp::fonts_system_arabic`
remembers what was installed, so a language change reinstalls the fonts.
Tests: the_installed_arabic_font_is_asked_for_by_arabic_alone (the Arabic flag
adds the installed font only when none is embedded, and the CJK request alone
adds no Arabic font). Checked a headless screenshot of the Arabic interface
without craft-fonts: the installed Arabic font draws the labels.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Fix the AutoSave switch knob: on is at the right, mirrored in Arabic
The title bar's AutoSave knob was placed with `lead_x(rtl == on, ..)`, which
reverses main's mapping in both directions: left to right it drew the knob at
the left when the switch was on, and right to left at the right. main draws it
at the right when on and at the left when off, so the mirrored interface must
draw it at the left when on: `rtl != on`.
The position is now `autosave_knob_x(rtl, on, track)`, pinned by a test for all
four cases. A headless screenshot of the off switch shows the knob at the left
in English and at the right in Arabic.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: file names and paths in right-to-left lines; kerning row order
Tester feedback on the Arabic interface:
- File > Open's Recent list, the built-in file browser and the title bar drew
file names and paths raw, from the left edge. In an Arabic line the marks of
a name ("(نهائي) 2.docx") and the folders of a path with Arabic parts were
scrambled. Rows now start at the side reading starts from (`rtl::lead_x`),
names go through `i18n::isolate` (a first-strong isolate, with a left-to-right
mark before the extension so `2.docx` stays `2.docx`) and paths through
`i18n::isolate_path` (a left-to-right isolate with a mark after every
separator, so neighbouring Arabic folders do not swap). Other languages get
the text untouched; saved and spoken text never carries the marks.
- Font dialog, Kerning row: the dialog's grid is drawn left to right inside a
right-to-left window, so "Points and above" came after its number; in an
Arabic interface it now comes first, so the line reads "14 نقطة فأكثر" from the
right. (The grid's columns themselves still keep their left-to-right order.)
Tests: names_and_paths_are_isolated_in_a_right_to_left_interface.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: mirror through craft_ui::direction and Style::right_to_left
The suite's craft-ui now has the direction helpers (`craft_ui::direction`) and
its egui fork a `Style::right_to_left` that mirrors egui's own chrome. Use them
instead of our parallel wrappers:
- `rtl::sync(ctx)` applies the interface direction every frame the language's
changes (`direction::apply`): it sets the shared direction state and
`Style::right_to_left` on every theme, which draws check boxes and radio
buttons with the mark at the reading start, mirrors submenus, scroll bars,
title bars and the combo boxes' arrows (the Print page's choice lists, the
font list) and opens combo menus from the right.
- `rtl::checkbox`, `radio_value`, `radio` and `indeterminate_checkbox` are
gone: about 200 call sites use plain `ui.checkbox`, `ui.radio_value`, ... and
egui does the mirroring (and names the control by its text, as a plain widget).
- `lead_x`, `lead_center`, `lead_top`, `start_panel` and `end_panel` delegate to
`craft_ui::direction`. `root`, `flows`, `island`, `grid`, `menu`, `vertical`,
`far_side` and the other layout helpers stay: the shared crate has no
equivalent that fits them.
Visual changes: the combo boxes' drop-down arrows and lists are mirrored in
Arabic; nothing changes in left-to-right languages (checked headless
screenshots of the English main window, Font dialog and Print page).
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Recent files and the file browser: full path on hover, long names keep their start
Review feedback:
- Each row of File > Open's Recent list shows the document's full path as its
tooltip (the path line under the name can be longer than the row).
- A long name in the built-in file browser is laid out in one row, with an
ellipsis at its end, from the side reading starts from, instead of being
clipped at the row's edge: in a right-to-left interface the old text anchored
at the right edge cut the end of an Arabic name and the start of a Latin one.
The whole name is the row's tooltip when it was shortened.
Checked headless screenshots of the file browser with a long English and a long
Arabic name.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Font combos in a right-to-left row: the arrow joins its field on the left
The ribbon's font name and size boxes are drawn from a field and a separate
arrow box that share one outline: the field is square and the arrow's box is
rounded on the side where the arrow goes, painted a border width under the
field. That assumed the arrow is right of the field. In a right-to-left row
(the Arabic ribbon) the arrow comes after the field on its left, so the field
was square on the wrong side and the arrow box rounded on the side facing the
field: two boxes with a gap-like seam, the arrow looking outside the frame.
`arrow_box_shape(rtl, ..)` mirrors the radii and the underlap, and the field's
square corners are chosen by the row's direction (the nw/sw pair in right to
left). Left-to-right rows are drawn exactly as before (English before/after
crops are identical).
Test: the_arrow_box_is_rounded_away_from_its_field.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Pin craft-i18n 4612850 (merged Arabic WordCraft rows, craft-i18n#76)
The pin and the Flatpak manifest commit move from 1935849 to 4612850, which is on
craft-i18n main and adds the 70 Arabic rows this branch relies on.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Pin craft-i18n cac2cf0 (Arabic number agreement and status-bar rows)
Moves the pin and the Flatpak manifest commit from 4612850 to the current craft-i18n
main, which includes craft-i18n#95 (48bed03) and #81 (ef58ff3).
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic: isolate paths shown beside labels; mirror the Print page zoom
File > Info shows Location as its own left-to-right path label (cut short with the full path on hover, not wrapped), and the open-failure, Exported and dictionary-file messages isolate their paths. The Print preview zoom puts minus at the slider's left end and plus at its right in Arabic, as the status bar does.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic: mirror the label/field rows of the Font, Info, Paragraph, Page Setup, Insert Table and Options forms
rtl::Table lays a form out as an egui Grid in a left-to-right interface (same id, columns and spacing, so the output is unchanged) and, where the interface is mirrored, with each row's cells running from the right, every column as wide as its widest cell. File > Info puts Properties at the right and Statistics after it, and the Font dialog's kerning row reads 14 points and above.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Docs: record the mirrored Arabic interface in the roadmap, gaps and localization parity
Progress log, the Arabic language row, gap 11 and the status lines and revision histories of the three docs.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: Insert Hyperlink, Word Count, Phonetic Guide, New Style, Modify Style, Encrypt, merge rule and Match Fields dialogs read right to left
Their label-and-field rows use rtl::Table, so in a mirrored interface the label is at the right with its field to its left. rtl::Table gains striped() for Match Fields. English renders are pixel-identical (only a caret-blink strip differs in an untouched dialog).
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: Line Numbers, Hyphenation, Drop Cap, Caption, Cross-reference, Index, Mark Index Entry and Source dialogs read right to left
Their label-and-field rows use rtl::Table (label at the right, field to its left). English renders are pixel-identical.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: Picture Size, Split Cells, Convert Text to Table, Footnote and Endnote, Table Properties, Cell Options and Custom Properties dialogs read right to left
Their label-and-field rows use rtl::Table. Picture Size's Height and Width pairs read Height first at the right. English renders are pixel-identical.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: Define New Multilevel List, Track Changes Options, content control properties, custom colours and table style dialogs read right to left
Label, field and swatch rows use rtl::Table. English renders are pixel-identical.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: Columns widths, Special Characters, Compare, AutoCorrect and About Models tables read right to left
Table columns now start at the right edge (rtl::Table gains top(), min_row_height() and an unset column count). About > Models stays a left-to-right scroll box with its columns listed from the right. English renders are pixel-identical (only the caret blink differs).
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: table-of-contents styles, recipient filter and sort, and the ribbon Paragraph group read right to left
rtl::Table now stacks its rows top to bottom whatever way the area around it runs (a ribbon group lays out in a row). English renders are pixel-identical (caret blink and a status toast differ in untouched dialogs). The TOC options and recipient filter/sort rows are converted by pattern and not seen in an image.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: Columns preset tiles and Preview label, Macros, Add/Remove arrows, Zoom slider and the Recipient List grid
A preset tile is as wide as its caption and centres it (the long Arabic captions ran into the next tile); the Preview column keeps its width so its label no longer wraps letter by letter; Macros puts the name box and list at the reading start with the buttons beside them; the Add >> and << Remove arrows swap in a mirrored interface so they point the way the items move; the Zoom slider is drawn left to right as in English; the Recipient List data grid scrolls left to right instead of running past the left edge. English renders are pixel-identical.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: the chart type and SmartArt layout galleries list their tiles from the right
The chart type dialog, the Insert SmartArt dialog and the ribbon's SmartArt Layouts gallery use rtl::Table rows, so the first tile sits at the reading start. English renders are pixel-identical.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Take main's panes/host.rs after the merge
The merge kept a use of mirrored() that main's pane-dock fix removed; this branch does not touch the panes.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: Columns preset captions are translated in the mirrored tile
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic: one Arabic and one French row in the localization parity table; About > Models columns read from the right
The merge left the Arabic and French rows twice in docs/localization-parity.md; each
is now a single row (main's current French text, the Arabic row with the dialogs
note). About > Models keeps main's fitted table but lists its columns, their
alignments and grow weights reversed when the interface is mirrored, so Company
starts at the reading edge. The credits.rs change comes from tareq's helper merge.
Co-authored-by: tareq <tareq.halaby@gmail.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* About > Models: the mirrored table keeps its own widths and scroll position
The columns are listed in reverse when the interface is mirrored, and egui keeps the
resizable column widths and the scroll offset by id. A language switched at run time
would apply one direction's widths to the other's columns, so the mirrored table uses
its own id.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: About > Models alignment mirrors as its comment says
The mirrored Models table reversed the per-column right-align flags but
did not negate them, so in Arabic the text columns stayed left-aligned and
the counts right-aligned, the opposite of the comment ("counts line up on
the right (left in RTL)"). Negate after reversing so the text sits at the
reading edge and the counts on the left. Keep this line when touching
models_ui.
* About > Models: a mirrored table that overflows opens at its reading edge
The reversed Arabic table puts Company in the rightmost column, but the
horizontal scroll area started at the left, so when the table was wider
than the dialog (narrow window, widened columns) Company and Model were
offscreen. Stick the scroll area to the right in a mirrored interface.
---------
Co-authored-by: Abdelhaq El Amraoui <abdelhaqelamraoui@gmail.com>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
Co-authored-by: email <email@email.com>
Co-authored-by: tareq <tareq.halaby@gmail.com>
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
- odf.preset: word (Microsoft Word style, default) or libreoffice; wordcraft still read as word
- Options, CLI (WORDCRAFT_ODF), docs and ROADMAP follow the two styles
- CodeRabbit: kept groups and story fingerprints follow fill_objects; padding serde default;
list field depth; literal doubled quote; ASK/SET results not exported; dc:date offsets;
first_pages order; unique picture names; finite raise clamp; PDF rotated-text guard;
.ott in the password message; flat element bounded by depth; cell tile fallback;
ROADMAP and docs reconciled
- Remove clean-room wording from the ODT tests
* Gap 4: flag document fonts that aren't installed
The font box (ribbon, mini toolbar, both Font dialog boxes) shows a
warning mark when the current font isn't installed; its hover note
names the font drawn instead. The status bar says "N fonts not
installed" and lists each with the faces drawn instead, plus Add Font….
Agents get `font.missing` and `format.state.fontShownAs`.
Layout records, where it picks a face per text segment, the fonts the
shown text asks for that aren't installed and the faces drawn instead
(ParaLayout::substituted, DocLayout::substituted_fonts), so hidden
text, unused styles and orphaned stories never count; list labels,
field results and East Asian and complex-script text do, and so does a
missing roman font drawn in Cambria. Metric-compatible substitutes and
symbol fonts drawn as Unicode aren't flagged. Bounded for hostile
files: 64 pairs a paragraph, 1024 a document, names kept to 256
characters, 20 rows in the popup.
Ported from alehel/wordcraft#1 onto current main; English strings only
(translations belong in storytold/craft-i18n).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Gap 4: missing-font review fixes
- Judge a padded font name by the face layout drew for it, and skip blank names.
- Name the face CJK text is drawn in for a missing East Asian font, not Cambria.
- Keep the missing-fonts list per window, so several windows don't rebuild it every frame.
- Expose the font box's warning to screen readers as its description.
- Count missing fonts with craft-i18n plurals (`i18n::tn`).
- One table of metric twins (`fonts::word::METRIC_TWINS`): a missing font is drawn in an
installed twin first, and the warning reads the same table.
- Find the status-bar item by part of its label in the click test.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Gap 4: warn for a font picked at the caret; drop fonts of hidden list items
- At a collapsed caret the font box warns for a missing font typing will use, also at the end
of text in another font (it waited for the first letter).
- A list item that shows nothing (#3982) reports no missing font: its number was shaped, and
its font recorded, before layout dropped it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Gap 4: say where Add Font… is, and that it needs the font file
The font box's note said "Add Font… installs it": Add Font… opens a file picker at the end of
the list, so it only helps with a font file at hand.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Gap 4: docs say the popup lists 20, and when the font box warns ahead
CodeRabbit review: the status-bar popup lists the first 20 missing fonts, then a count; the font
box also warns at a collapsed caret for a font no shown text uses yet; `fontShownAs` is the
font's substitute, fallback faces aside.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Gap 4: the Font dialog warns for a missing font over a selection
CodeRabbit review: the dialog's boxes show the fonts OK applies, which no shown text may use
yet (an Asian text font over Latin text, a font typed into the dialog), so they name the
substitute whatever is selected. The ribbon's box over a selection still reads the list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Gap 4: the Asian font box names the face CJK text gets
CodeRabbit review: the status bar's list is by font name, so for a font Latin text also uses
it named the Latin text's substitute. The Asian text box now always looks up the face layout
draws Chinese, Japanese and Korean text in.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Gap 4: gaps.md status on the current line, missing-font scope and twin wording
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Gap 4: gaps.md says which missing fonts are flagged and what font.missing lists
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Gap 4: font.missing lists what the current view lays out
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Conflicts kept both sides. Where the two branches met:
- Para.mark: both added it. It stays CharProps (ODT needs it); HTML's
`<p> </p>` converts its Fmt, and to_doc reads it in one place.
- Arrowheads: the PR's line ends (top left to bottom right) with main's
arrowhead styles.
- inline_rect: the PR's depth below the baseline with main's rule room.
- Spacing and Cell literals take main's new fields.
- The zip entry guard (#3660) also covers the encrypted ODT paths, which
parsed a package before it; regression test in tests_more/encryption.rs.
- chunks_exact to as_chunks in odt/frames.rs and odt/path.rs (clippy).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A comment, tracked change or index mark reaching from one paragraph
into another, or a text box continuing in another's, ties paragraphs
into a group: written as read while every paragraph of it is as read,
else all from the model, which names what ties them afresh.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Opening draws charts from their data, which changed their paragraphs'
fingerprints, so their markup never matched. Drawing goes through
Document::fill_objects, which moves the kept markup with them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
A section in a table's cell is kept around the cell's paragraphs and
closed in the cell. One starting or ending at a paragraph with twins
(an empty one) is kept by that paragraph's own identity; the writer
opens each kept section once, so a copy can't open it again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Bump the workspace version for the point release carrying the CP4.3
proofing work: one language list, the missing-pack bar on a fresh
install, and the Options › Language pane.
Every element of the ODF 1.3 schema checked against both corpora and a
document of our own for each one no file held (docs/odt-element-audit.md).
Found and fixed: index and reference marks over text, plugins and
floating frames weren't kept as read, and a form's data source was
taken for a control. Left: password and grid form controls.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
row_names uses the shared display_name helper, so a built "Language (Region)" name is translated in
parts. The dictionaries-folder comments in prefs.rs and tests.rs say File > Options > Language.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCYmv6UJmY2QcuhfXco
Swedish (Finland) is built at run time, so no catalog row can match it. One helper
(ribbon::display_name) now translates the language, the region and the {language} ({region})
template separately and joins them; the Set Proofing Language list, the Language menu, the status
bar and the dialog all use it. English output is unchanged and matching never uses a name.
gap 8 no longer describes the missing-pack bar, which is in its own branch.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCYmv6UJmY2QcuhfXco
* #3867: review — header repeats, picture outlines and linked-box widths bounded the same way every layout
- Header repeats: a Clip (floating Drawing Canvas) counts its members, depth-bounded, so a 1000-member canvas no longer counts as one item (CodeRabbit thread 4373103686); the budget is per layout (Ctx), not per table.
- Tight-wrap outlines: each cache entry stores its picture's pixel cost; a cached hit is charged to the layout's decode budget like a decode, so cold and warm layouts (and the CLI) wrap alike.
- Linked boxes: widths are budgeted by laid-out work (MAX_FLOW_WORK), not 16 widths, so ordinary stories keep exact widths for every box.
- header_rows.contains -> index compare; layout-parity doc revision.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HUodYU9r4mPHed4pPsjHC2
* #3867: review — a picture that fails to decode still costs its pixels when cached; header repeats restored on retry
- contour: Alphas records the pixels each picture charged (costs map), also when the body then fails to decode, so the cache entry's cost is right and warm layouts charge it like cold ones.
- Snap saves and restores ctx.header_repeats so balance_pass retries don't keep their charge.
- Tests: truncated large PNG cold vs warm; canvas header row end to end through place_table; linked-chain bound <= 8; vertical box's layout differs from every other box's.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HUodYU9r4mPHed4pPsjHC2
* #3867: CodeRabbit — header and linked-box budgets count every clip descendant
placed_cost counts iteratively (explicit stack, stops past the limit) and is shared by flow_work.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HUodYU9r4mPHed4pPsjHC2
* #3867: docs — progress log, gap 20 note for layout resource caps and linear-time passes
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HUodYU9r4mPHed4pPsjHC2
* #3867: review — roadmap gives each cap its unit: header items, wrap-cache pixels, linked text box lines and items
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* #3867: CodeRabbit — the vertical-box check runs past the work cap too
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #3867: review — a linked chain's work counts the story it lays out, not only the lines it shows
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #3867: review — header-row cost import follows main's explicit layout imports (#4501)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #3867: review — a test pins the header repeats that column balancing gives back; docs keep main's caps row and both gap status lines
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
Found checking 220 ODT files from other applications (local only):
- What a section hidden with text:display="none" holds is read as
hidden text, so it stays hidden written without the section.
- A top-level list whose items are all as read is written as read
whole (label spacing, picture bullets, list headers); a list going on
with it names it; a section may begin or end with a list.
- A damaged package's media type isn't printed in its error.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
The Dictionaries folder moves here from Proofing with the Dictionary files list (#1063) kept. Set as
default sets only the saved default proofing language (the new pure review.language.preferred command), and
proof.packs returns the languages rows.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCYmv6UJmY2QcuhfXco
With no list of packs yet the bar offers a language with no dictionary and Install fetches the
list, then the pack. The caret's typing language counts, the spelling context menu heading is in
the interface language, and closing the bar is remembered per document, pack locale and tag.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCYmv6UJmY2QcuhfXco
Every published pack is named in English, Valencian is ca-ES-valencia, and rows are matched by
tag (language, script, region, variant), never by the name shown. One region helper
(packs::is_region, packs::without_region) next to pack_for_tag serves the engine and the UI.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCYmv6UJmY2QcuhfXco
The Contributors table and the Models table were egui Grids inside a
two-way scroll area: they opened wider than the dialog, so they scrolled
sideways, and Company and Model sat almost touching. Both are now
egui_extras tables. Each column opens at the width of its header and widest
cell, the spare width goes to the text columns (Name; Company and Model),
and every column edge can be dragged. Widening a column grows the table
like a spreadsheet, and only then does it scroll sideways; the header stays
put while the rows scroll. Counts and dates are right-aligned and every
cell is vertically centred.
The sorted column stays highlighted and its direction shows on the
toolbar's sort-order button, so headers no longer reserve room for an
arrow. The opening widths come from fit_widths, a pure function with unit
tests that a fitted table fills its room exactly and that only the text
columns give way when room is short.
The About dialog opens 820 points wide, so every column fits at its natural width.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A kept part without a media type (LibreOffice's empty accelerator
configuration, a file the manifest didn't list) was written without an
entry, and LibreOffice refused the saved file. ODF 1.3 Part 2 §4.3
lists every file; its media type stays empty as read.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
- Paragraphs and tables holding bookmarks are kept; the writer takes
the names kept markup begins and ends, so either end may be as read.
- Footnotes and endnotes: each note's text fingerprinted when read;
kept while it and the note numbering are as read.
- Formulas, charts and other objects in kept markup, with their files
and preview pictures (only while that markup is written).
- Page-anchored frames LibreOffice puts in the text before a paragraph
are kept before its markup.
- Styles of different families sharing a name are kept apart.
- The text keeps text:use-soft-page-breaks while kept markup holds them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
* #3382: a long comment's card and balloon stop at ten lines
A comment or reply field, in the Comments pane and in a selected balloon,
is at most ten lines tall and scrolls beyond that, keeping its caret in
view. A balloon that isn't selected shows the first ten lines of the
comment and of each reply and cuts off the rest; clicking it opens the
scrolling field. The buttons and the next comment stay in view.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #3382: record the ten-line comment cap in the UI parity doc; test the drawn rows
The Comments entry of the UI parity doc notes that a long comment's card,
balloon and fields stop at ten lines. A new test checks what an unselected
long balloon paints: its first ten rows inside the card's clip and none of
the rows after them, in Latin and Arabic.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #3382: check the shown balloon rows start inside the clip
The drawn-rows test now also checks that each of the first ten rows starts
at or below the top of the balloon body's clip, so a clip that hid the
first rows would fail it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The paragraphs a drawing's text holds count as its story's, so the
paragraph showing it can be kept. Each text box's and shape's story is
fingerprinted when read (with the boxes and notes it holds); one edited
sends its paragraph to the model. Linked boxes and a comment inside a
box's text stay with the model.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
A paragraph whose comments (range, replies, end) or tracked changes
(start and end) are all its own is kept as read. Each top-level comment
is fingerprinted with its replies when read; one edited, resolved,
answered or deleted sends its paragraph to the model, as a reply written
elsewhere in the file does. The change regions kept markup marks are
written as read (those their deleted content marks first), beside
WordCraft's own, which take the writer's prefix; one without a date is
written from the model. An older file's region gets its ODF 1.3 xml:id.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
A paragraph or table holding pictures and shapes without text is kept
as read while unchanged, with the pictures it shows (only those linked
from markup actually written, so a deleted picture stays deleted) and
its frames' styles. Text boxes, shapes with text, objects and controls
stay with the model. The file's Graphics and Frame styles are written as
read; WordCraft's own pictures don't take the file's picture names. The
flat writer inlines a picture whatever form its element has.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
A section at a text box's top level keeps its wrapper, like the body's;
the box's story closes whatever it opened, so an edit inside the box
can't leave a section open past it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
- Kept definitions are keyed by name space (a list style may share a
paragraph style's name, §16.2), so unused list styles survive a save.
- Section wrappers kept as read go around tables as well as paragraphs,
nested ones too, balanced however the blocks are edited.
- An unchanged chart keeps its replacement picture.
- Note citations use the document's number format and first number.
- draw:z-index is read into the float's stacking order and written back.
- The no-edit gate counts elements, catching a section of three lost.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
The file's office:forms keeps its own head and each form:form with what
WordCraft doesn't model; controls are merged with the file's own. An
index whose generated entries nobody edited is written as read, with
its source settings and entry templates; an edited one is written from
the model. The no-edit gate saves nine samples of our own.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
* fix(docbin): keep one override per table cell instead of a copy per repeated sprm
* DOC import: vertical alignment reads only the cells a row can hold, like the other cell-range sprms
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Two wgpu devices drawing at once crash Windows' software rasterizer (WARP, d3d10warp.dll: 0xc0000005, sometimes heap corruption 0xc0000374), which is the adapter a machine without a GPU or a remote session gets. The ui-egui tests that render (a dragged shape, a rotation drag, and the ignored spelling review preview) now hold one lock while their harness lives. On Windows 11 over SSH the two rendering tests crashed 8 of 20 runs together (0 of 20 alone), and the whole ui-egui lib run 2 of 6; with the lock 0 of 20 and 0 of 10.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Arabic interface: mirrored right-to-left window and Arabic UI fonts
Adds the Arabic (`ar`) interface language's code: its catalogs are craft-i18n's
`locales/ar`, so this changes no catalog.
- `ar` is registered in `i18n::LANGUAGES` and `Lang::rtl()` says it is written
right to left; its translations are used as written (egui's text layout
orders each line's bidi text itself). A ribbon location reads from the right
with a leftwards mark.
- `rtl.rs`: the window is mirrored. Containers open in `rtl::root`; columns,
grids, checkboxes, radio buttons, menus, rows, panels, the dialog tab strip
and the ribbon's scrolling row follow the language's direction. Title bar,
status bar, ribbon tabs and groups, File pages (including Print, with the
settings on the right and a solid scrollbar gutter), dialogs, menus and the
task panes (their docking edge swaps) are laid out from the right. egui's
`Grid` panics in a right-aligned layout, so grids go through `rtl::grid`.
- Arabic UI font fallback: the craft-fonts Arabic face, else an installed
Arabic font, loaded when the interface is Arabic.
- The "Auto (200%)" size label keeps its percent sign inside the isolated
number.
- Tests: Arabic locale, saved preference and lookup order on fixture catalogs;
an interface audit (skipped without the craft-i18n Arabic catalog) that lays
the app out right to left at several widths, checks tab, group, pane, Print
and Go To positions and that nothing panics.
The Arabic work builds on Abdelhaq El Amraoui's mirrored-interface PR (#737).
Co-Authored-By: Abdelhaq El Amraoui <abdelhaqelamraoui@gmail.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: pin craft-i18n at a commit with the Arabic catalog; review fixes
- craft-i18n.rev and the Flatpak manifest pin 19358491 (craft-i18n main), the
first commit line that has locales/ar/wordcraft.tsv. The old pin had no
Arabic catalog, so `ar` was registered but not embedded and two i18n tests
(the_language_setting_is_a_ui_command_and_persists,
the_languages_offered_are_the_embedded_ones_of_the_list) failed in CI.
- The Arabic font fallback is requested for any right-to-left interface
(`Lang::rtl()`), not only after the language picker sets the flag, so an
automatic or saved Arabic gets the installed Arabic face.
- The file browser, the update window and Reading Mode's toolbar run their
bodies in `rtl::root`, so their far-side buttons and rows are mirrored.
- A group in a right-to-left ribbon row is measured from the right edge: the
cursor's left edge is negative infinity there, so its width was NaN and the
ribbon planner dropped every group, never compacting a narrow Arabic window.
A narrow window now folds groups into drop-downs.
- The mirrored checkbox and radio marks are labelled by their text, so screen
readers name them.
- Tests: group width in a right-to-left row; the Arabic interface audit checks
Reading Mode's toolbar.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: ask for the installed Arabic font separately from the CJK one
A previous commit made every right-to-left interface request the installed CJK
fallback font (`system_cjk`) so that the installed Arabic font would load. That
also made every Arabic launch read a large system CJK font file when no
craft-fonts input is embedded (the Flatpak build has none).
`install_ui_fonts` now passes a separate `system_arabic` flag (`Lang::rtl()`):
the installed Arabic font is read for it, and `system_cjk` is again set only
by a CJK interface or by CJK text on screen. `WordApp::fonts_system_arabic`
remembers what was installed, so a language change reinstalls the fonts.
Tests: the_installed_arabic_font_is_asked_for_by_arabic_alone (the Arabic flag
adds the installed font only when none is embedded, and the CJK request alone
adds no Arabic font). Checked a headless screenshot of the Arabic interface
without craft-fonts: the installed Arabic font draws the labels.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Fix the AutoSave switch knob: on is at the right, mirrored in Arabic
The title bar's AutoSave knob was placed with `lead_x(rtl == on, ..)`, which
reverses main's mapping in both directions: left to right it drew the knob at
the left when the switch was on, and right to left at the right. main draws it
at the right when on and at the left when off, so the mirrored interface must
draw it at the left when on: `rtl != on`.
The position is now `autosave_knob_x(rtl, on, track)`, pinned by a test for all
four cases. A headless screenshot of the off switch shows the knob at the left
in English and at the right in Arabic.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: file names and paths in right-to-left lines; kerning row order
Tester feedback on the Arabic interface:
- File > Open's Recent list, the built-in file browser and the title bar drew
file names and paths raw, from the left edge. In an Arabic line the marks of
a name ("(نهائي) 2.docx") and the folders of a path with Arabic parts were
scrambled. Rows now start at the side reading starts from (`rtl::lead_x`),
names go through `i18n::isolate` (a first-strong isolate, with a left-to-right
mark before the extension so `2.docx` stays `2.docx`) and paths through
`i18n::isolate_path` (a left-to-right isolate with a mark after every
separator, so neighbouring Arabic folders do not swap). Other languages get
the text untouched; saved and spoken text never carries the marks.
- Font dialog, Kerning row: the dialog's grid is drawn left to right inside a
right-to-left window, so "Points and above" came after its number; in an
Arabic interface it now comes first, so the line reads "14 نقطة فأكثر" from the
right. (The grid's columns themselves still keep their left-to-right order.)
Tests: names_and_paths_are_isolated_in_a_right_to_left_interface.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: mirror through craft_ui::direction and Style::right_to_left
The suite's craft-ui now has the direction helpers (`craft_ui::direction`) and
its egui fork a `Style::right_to_left` that mirrors egui's own chrome. Use them
instead of our parallel wrappers:
- `rtl::sync(ctx)` applies the interface direction every frame the language's
changes (`direction::apply`): it sets the shared direction state and
`Style::right_to_left` on every theme, which draws check boxes and radio
buttons with the mark at the reading start, mirrors submenus, scroll bars,
title bars and the combo boxes' arrows (the Print page's choice lists, the
font list) and opens combo menus from the right.
- `rtl::checkbox`, `radio_value`, `radio` and `indeterminate_checkbox` are
gone: about 200 call sites use plain `ui.checkbox`, `ui.radio_value`, ... and
egui does the mirroring (and names the control by its text, as a plain widget).
- `lead_x`, `lead_center`, `lead_top`, `start_panel` and `end_panel` delegate to
`craft_ui::direction`. `root`, `flows`, `island`, `grid`, `menu`, `vertical`,
`far_side` and the other layout helpers stay: the shared crate has no
equivalent that fits them.
Visual changes: the combo boxes' drop-down arrows and lists are mirrored in
Arabic; nothing changes in left-to-right languages (checked headless
screenshots of the English main window, Font dialog and Print page).
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Recent files and the file browser: full path on hover, long names keep their start
Review feedback:
- Each row of File > Open's Recent list shows the document's full path as its
tooltip (the path line under the name can be longer than the row).
- A long name in the built-in file browser is laid out in one row, with an
ellipsis at its end, from the side reading starts from, instead of being
clipped at the row's edge: in a right-to-left interface the old text anchored
at the right edge cut the end of an Arabic name and the start of a Latin one.
The whole name is the row's tooltip when it was shortened.
Checked headless screenshots of the file browser with a long English and a long
Arabic name.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Font combos in a right-to-left row: the arrow joins its field on the left
The ribbon's font name and size boxes are drawn from a field and a separate
arrow box that share one outline: the field is square and the arrow's box is
rounded on the side where the arrow goes, painted a border width under the
field. That assumed the arrow is right of the field. In a right-to-left row
(the Arabic ribbon) the arrow comes after the field on its left, so the field
was square on the wrong side and the arrow box rounded on the side facing the
field: two boxes with a gap-like seam, the arrow looking outside the frame.
`arrow_box_shape(rtl, ..)` mirrors the radii and the underlap, and the field's
square corners are chosen by the row's direction (the nw/sw pair in right to
left). Left-to-right rows are drawn exactly as before (English before/after
crops are identical).
Test: the_arrow_box_is_rounded_away_from_its_field.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Pin craft-i18n 4612850 (merged Arabic WordCraft rows, craft-i18n#76)
The pin and the Flatpak manifest commit move from 1935849 to 4612850, which is on
craft-i18n main and adds the 70 Arabic rows this branch relies on.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Pin craft-i18n cac2cf0 (Arabic number agreement and status-bar rows)
Moves the pin and the Flatpak manifest commit from 4612850 to the current craft-i18n
main, which includes craft-i18n#95 (48bed03) and #81 (ef58ff3).
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic: isolate paths shown beside labels; mirror the Print page zoom
File > Info shows Location as its own left-to-right path label (cut short with the full path on hover, not wrapped), and the open-failure, Exported and dictionary-file messages isolate their paths. The Print preview zoom puts minus at the slider's left end and plus at its right in Arabic, as the status bar does.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic: mirror the label/field rows of the Font, Info, Paragraph, Page Setup, Insert Table and Options forms
rtl::Table lays a form out as an egui Grid in a left-to-right interface (same id, columns and spacing, so the output is unchanged) and, where the interface is mirrored, with each row's cells running from the right, every column as wide as its widest cell. File > Info puts Properties at the right and Statistics after it, and the Font dialog's kerning row reads 14 points and above.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* docs: record Arabic mirrored interface landing (#1195)
Update the language counts, Arabic parity row, gap #11, and UI/ROADMAP
status so they match the craft-i18n catalog and mirrored shell already
on this branch.
* Fix Organizer Copy arrow in RTL and refresh roadmap status.
Point the Copy glyph at the Document column when the shell is mirrored,
and bump docs/roadmap.md status/revision history for Arabic UI (#1195).
* fix(ui): keep pane dock left/right physical in RTL
ui.paneDock and view.stylesPaneDock now store and report physical window sides; only unset defaults still open on the reading-start edge. Also wrap the language-packs grid for RTL, document the contract, and load a system Arabic face for Arabic names in LTR UIs.
* docs: clarify mirrored default pane edges in RTL
Start-default panes open on the physical right in Arabic; end-default
panes open on the physical left — not every never-docked pane on the right.
* refactor(ui): one PaneState for a saved pane place
The four saved-dock arms built the same PaneState; only the place and
whether it was set explicitly differ.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* style(ui): rustfmt the panes re-exports
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: The Legend Of MTS Dev <tlo.mts.tsh@gmail.com>
Co-authored-by: Abdelhaq El Amraoui <abdelhaqelamraoui@gmail.com>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
Co-authored-by: email <email@email.com>
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
The standard (§18.3.1, since ODF 1.2) reads an angle without a unit in
degrees. WordCraft read unitless gradient angles in tenths of a degree in
every file; in ODF 1.3 files it now follows the standard.
LibreOffice and OpenOffice wrote gradient and hatch angles in tenths of a
degree in their files before ODF 1.3 and still read them so; read by the
standard, every older LibreOffice document's gradients would turn the
wrong way. So in files older than 1.3 they are still read in tenths: a
deviation from the standard, out of necessity, now listed in
docs/odf-interpretation.md (a new rule and section for such deviations).
WordCraft always writes these angles with a unit.
The ODF 1.2 -> 1.3 changes (ODF 1.3 Part 3 Appendix G and their OASIS
issues) were checked: none other gives a value written for 1.2 another
meaning; the new defaults match how LibreOffice already read them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
paragraph_issues dropped issues touching a run left unchecked by testing
every run of the paragraph against every issue. A paragraph can have many
runs and many issues within the proofing size limit, so the filter was
quadratic in the paragraph's size. The unchecked ranges are now merged and
sorted once, each issue is looked up by binary search, and paragraphs
without unchecked runs skip the filter.
More of what WordCraft doesn't change is written back as it was read:
tables; the document properties it doesn't model (template, statistics,
editing time, printing); the declarations opening the text and the
document's scripts; page layouts and master pages while the page setup
is unchanged, each section starting with the master page it started
with; named sections around unedited paragraphs. Package files and
folders kept markup names (a style's fill picture, a header's embedded
object) are written with it, with their manifest entries.
Files are saved as ODF 1.3; markup kept from an older file is brought to
1.3's meaning (a gradient's or hatch's unitless angle was tenths of a
degree). WordCraft's own drawings state style:flow-with-text, which the
standard leaves open.
odt::tests_more::lossless saves seven samples of our own without edits
and fails on anything lost (nothing is allowed), and checks that edits
keep the saved parts well-formed.
Over the 133-file corpus the round-trip difference falls from 191k to
51k pixels; 95 files come back pixel-identical (62 before).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
A placeholder test used the label <Title>, which LibreOffice's letter
templates also use; it now uses an invented one. The kept-markup tests
say that every sample (and any sample file the no-edit loss gate adds)
is written by us, never taken from someone else's files.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
A paragraph nothing changed since it was read (by a fingerprint of how it
was modelled) is written with its own markup, unknown elements and
attributes included, together with the automatic styles, common styles,
font faces, namespaces and package files it names. While no style or list
definition changed, styles.xml's office:styles is the file's own (unused
list styles, note and line numbering configuration, attributes WordCraft
doesn't read); drawing definitions and the default graphic style stay
WordCraft's, as drawings are written from the model.
Paragraphs holding drawings, comments, tracked changes or ranged marks,
or starting a page, are written from the model, as is everything edited.
Kept markup lives in memory only (wordcraft_doc::kept, 64 MB at most) and
is never part of the document's content.
Over the 133-file corpus the round-trip difference in LibreOffice falls
from 528k to 191k pixels; 62 files come back pixel-identical (46 before).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
LibreOffice reads an author field without text:fixed as fixed (the
standard says not fixed) and writes false itself; an empty author field
stayed empty after a save instead of showing the author. Sender fields
are written as LibreOffice writes them, without the attribute.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
The default paragraph style's text colour (fo:color) is read into the
document's default and written back: Google Docs' grey résumé came back
black. What a covered table cell holds (not shown, §9.1.5) is skipped;
it went before the table as empty paragraphs, pushing ONLYOFFICE's table
down the page.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Widow and orphan control a file doesn't state is open in the standard
(it refers to XSL, whose initial value is 2); LibreOffice reads it as
off. It is now a profile case (widowControl), and WordCraft writes it on
its default style either way.
LibreOffice measures tab stops from the paragraph's indent when its
TabsRelativeToIndent setting is on (its default), default stops too
(measured). WordCraft's layout now counts default stops from the indent
for such documents, and writes them back measuring from the indent
instead of from the margin, which moved LibreOffice's default stops.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Kerning turned on or off span by span (style:letter-kerning) is read and
written where it differs from the document's default; without it
LibreOffice set ONLYOFFICE's text wider and every page broke elsewhere
after a save. A note reference keeps its own formatting (a span around
text:note), and a note starting with a tab keeps it: only the space
WordCraft puts after the mark is left out.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
A fixed date or time (text:fixed) opens as a locked field and is written
back fixed, with the value its text shows under its picture
(text:date-value / text:time-value), which LibreOffice needs to keep it.
One whose text can't be read back is written as text. Sender fields open
as SENDER fields and are written back as text:sender-*.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Another ui-egui test's frame runs language_packs::tick, which puts installs on the engine's
thread while this test's backend is set; start_install then returned Ok and the test failed
in the full suite (it passed alone). Red on main since the language packs merge (#5224).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
User fields (text:user-field-decl, text:user-field-get: LibreOffice's
report templates, 58 documents of the corpus) were read as custom
document properties and written back as meta:user-defined properties
with text:user-defined fields: the look and values stayed, the kind
didn't. Custom properties now remember being user fields
(CustomProp::odf_user_field) and are written back as
text:user-field-decls with their values and text:user-field-get fields.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Word's TOC over entries in columns keeps its TOC Heading title in a one-column
section above a blank paragraph that ends it; Update Table moves the field into
that blank paragraph. Replace (references.toc with settings) put the new title
under the break, inside the two-column section, and Remove kept the blank
paragraph and its break.
Observed black-box in Word for Mac 16.114.3 on a synthetic document: Insert
Table of Contents keeps the title, the blank paragraph and the break and only
changes the field; Remove Table of Contents takes the title, the blank
paragraph and its break with the entries.
Replace now keeps the title above the break (renamed when a title is given)
and rebuilds the field and entries in place; Remove takes the title and the
blank section-ending paragraph with the table. A paragraph of another style
above the break stays.
Co-authored-by: Harrison Smith <harrison@hsmith.dev>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* #5290: Page Up/Down move by a page in Outline, Draft and Web Layout
These views lay the document out as one long page, so caret.pageUp/pageDown looked for a previous or next page, found none and left the caret where it was. Move by the text area height of the caret's section instead, the same distance Print Layout moves.
* #5290: Page Up/Down pick the line past the caret, and page from a hidden outline selection end
Choose the destination among the lines past the caret by height first (DocLayout::line_toward), so narrow right-indented paragraphs can't keep the caret on its own line when the step is short. The above/below test is shared with vertical().
In Outline view, a selection that ends in text a collapsed heading hides pages from where the outline shows it (outline::shown_pos, pulled out of after_command), keeping the anchor. Avoid f32::clamp, which panics on a NaN page height.
When a region is chosen in File › Options, start-up replaces the first blank document with one
on that region's paper through `session.set_document`. That changes the session's active
document, but the window still showed the old one, so on the first frame `sync_document` took
the change for a switch of document and cleared the dialog. A password-protected file named on
the command line (a double-click in the file manager) had just asked for its password with
`file.open`, so the Password box was dropped before it was drawn and a blank Document1 stayed.
`WordApp::replace_startup_document` swaps the document and lets the window follow at once; the
start-up code uses it. Before the file is opened, so nothing is open to lose.
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
Found by a loss check comparing what a file uses with what a WordCraft
save writes back (over the 133-document local corpus):
- Every font a file uses is declared (office:font-face-decls, §16.21:
family, generic family from its name, pitch) and named where it is
used (style:font-name and its Asian and complex forms beside the
fo:/style: font families), so a reader without the font picks a like
one. Lost in 132 documents.
- meta.xml keeps who changed the document last (dc:creator), when
(dc:date) and how often it was saved (meta:editing-cycles), read into
and written from CoreProps. Lost in 120.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
The WOFF2 decoder rebuilds every collection font's table directory (16 bytes
per listed table) before checking its output size, while the file spends as
little as one byte per listed table. A small collection listing the same
tables over and over made it allocate hundreds of megabytes twice.
Preflight the collection directory before decoding: the rebuilt directories
must fit 16 MiB and no font may list a table twice.
A name record can hold 64K characters, and every face copies its family into
each localized name and every variable-font named instance (with their
localized names again), so a small font could claim hundreds of megabytes of
name strings before any later check.
name() now keeps at most MAX_NAME_CHARS characters, the limit localized names
already used, so every copy stays small.
The TIFF guard read the first Compression tag, but the tiff crate keeps the
last copy of a tag. An allowed first value (none, LZW...) could hide a JPEG
compression after it, and the JPEG strips are then decoded by a nested
decoder with its own limits, outside the caller's budget.
Building the queue checked every character of the document against every
citation field, so a document with many citations made Read Aloud do
characters x citations comparisons before playback started.
The citation spans are now sorted and merged once, and each position is
looked up by binary search.
Found with Google Docs' and ONLYOFFICE's ODT files (now in the local
corpus):
- A heading's look comes from its style, its outline level from its
element: a text:h without text:outline-level (level 1, §19.850.4) in a
style based on Heading 2 looks as Heading 2, as LibreOffice draws it,
and keeps outline level 1 (it became Heading 1). The level is carried
apart from the style (ParaProps::outline_level through the flow) and
written back as text:outline-level.
- Widow and orphan control is stated in the default paragraph style
(fo:widows/fo:orphans 2) when Normal has it: LibreOffice reads none
unsaid as off, so pages broke differently.
Google's 2011 Fundamentals export now round-trips with its 88 pages and
its text (1.27M -> 139k differing pixels).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
- PACK_INDEX: language-packs-2 index.json, sha256 b35c7aef…, built from craft-i18n 20467b63
- craft-proof pinned at storytold/craft-libs 47c9f625 (flag-based compounding, #497; review follow-ups and en-AU, #496)
- Options › Language: ProofLang::EnAu has no Hunspell dictionary name of its own (English uses SCOWL)
- docs: Danish, German, Dutch, Swedish, Norwegian, Hungarian, Estonian, Croatian, Persian and Esperanto are packs; Mongolian and Thai stay hidden
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Found by comparing WordCraft's own documents in LibreOffice and
bisecting settings.xml (observed only, black-box):
- The settings set's name, ooo:configuration-settings, is a qualified
name: without xmlns:ooo declared LibreOffice ignored every setting
WordCraft wrote (its Word layout rules, tab measuring).
- A set LibreOffice reads must be complete: a setting missing from it
gets its old pre-OpenOffice value, which changes the layout. WordCraft
now writes LibreOffice's current layout defaults (as a new LibreOffice
document has them), overlaid with Word's layout rules for documents
WordCraft lays out as Word does (not for ones opened from ODF), and
its own choices.
- How the space between paragraphs adds up follows a file's
AddParaTableSpacing (false: the larger, as Word); unstated, the ODF
profile's new sumParagraphSpacing (WordCraft: the larger, LibreOffice:
the sum). WordCraft writes it as it lays the document out.
WordCraft-origin documents in LibreOffice: 142k -> 80k differing pixels
over 42 documents; the LibreOffice corpus: no regressions, 40k -> 39.6k.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
LibreOffice's elegant agenda puts a small gradient picture behind cells
(§17.3 style:background-image in a table-cell style). Cells can now
carry a background picture (CellProps::picture: media, own size,
repeat none/tile/stretch, alignment), which layout draws over the
cell's shading and under its text, clipped to the cell (Placed::Clip of
Placed::Image; tagged as an artifact in PDF). The ODT reader reads it
(style:repeat, style:position, the picture from the package) and the
writer writes it back with the picture in the package (once per
picture).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
The padding inside an ODT page border (§20.210) was capped at Word's
31 pt border spacing when opening, so the text of WordCraft's own page
borders (24 pt from the edge, 1 inch margins: 45 pt of padding) moved
towards the border on reopening. In ODF the padding is the distance to
the text, any length on the page.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
WordCraft's watermark was left out of ODT files. It is now written as
LibreOffice and Word write theirs: a fontwork custom shape
(draw:text-path, draw:type fontwork-plain-text) named
PowerPlusWaterMarkObject, behind the text and centred on the page, in
every header (a header made for it alone fits inside the top margin, so
the text doesn't move). It doesn't grow to its text (draw:auto-grow-*
false), which LibreOffice needs to stretch the text to it. Such a shape
in a header, from LibreOffice or WordCraft, opens as the document's
watermark (text, colour, see-through, turn, size), not as a shape.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Found by saving WordCraft's own documents as ODT and opening them in
LibreOffice (42 documents: templates, themes, one per feature).
- Table styles: ODF has no table styles of Word's kind, so each cell now
states what the style gives it (fills, its borders, bold header text,
its paragraph spacing), under the paragraph's own styles as layout
applies them (ECMA-376 §17.7.2; StyleSheet::table_para_patch and
table_char_patch). The style's border mapping moved to
styles::part_borders, shared with layout.
- Tables read from ODT no longer get Word's Table Grid style, whose
single spacing changed their text.
- Columned sections say whether their columns end balanced
(text:dont-balance-text-columns, §20.428, read as its name says; its
value descriptions contradict it). Unstated, the ODF profile decides
(balanceSectionColumns: LibreOffice balances, WordCraft as Word).
SectionProps::balance_columns carries it to layout.
- SmartArt diagrams are saved as a draw:g of their shapes and text (with
an invisible frame keeping the graphic's box), which LibreOffice draws
as WordCraft does.
LibreOffice round-trip corpus: 40k differing pixels over 125 documents
(was 76k), 42 identical; WordCraft-origin documents 277k -> 145k.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
ODF 1.3 §20.206–20.209 define page margins by referring to XSL's
(§7.10), without saying whether XSL's initial value 0 comes with the
reference; LibreOffice uses 2 cm. The margin a page layout leaves out
is now the profile's `pageMargin`: WordCraft 0 (XSL's), LibreOffice
2 cm, or custom (File › Options › Advanced › OpenDocument files,
`file.options` `odf.pageMargin`). A stated margin is the file's under
every preset. With the LibreOffice preset, LibreOffice's CV, sans-serif
business letter and one-page résumé templates match LibreOffice again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
- File › Options › Advanced › OpenDocument files: the preset is a
drop-down like Measurement units and Region; shape line width is in
points (a 0.25 pt hairline showed as 0.00").
- WordCraft's preset keeps a header's or footer's stated spacing when
its style doesn't say whether it is dynamic: with no height stated,
growing into it always dropped the spacing the file states. Custom
profiles can still grow into it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
What ODF 1.3 defines, including XSL's initial values for fo: properties,
is followed whatever the settings: unstated page margins are now 0, and
padding without a border takes room in every ODT document. What the
standard leaves to the application (Part 3 §16.2) is an OdfProfile:
WordCraft's own choices by default, LibreOffice's, or custom values.
The profile fills in only what a file leaves unsaid; stated values win
under every preset (tests_more/profile.rs).
Cases: header height, how its height and spacing combine, dynamic
spacing, tabs from the indent, column gap, shape fill, line and
hairline, page frames against a paragraph, in-line frames against a
paragraph or page, and lines of only pictures.
- doc: odf_profile module; Settings::odf (OdfLayout) replaces odf_layout
- formats: import_with / import_flat_with take a profile
- engine: Prefs::odf, file.options `odf`, opened files follow it
- ui: File > Options > Advanced > OpenDocument files (presets, custom cases)
- cli: WORDCRAFT_ODF=wordcraft|libreoffice
- docs: odf-interpretation.md lists every case (law, open, writer
choices, Google Docs and ONLYOFFICE findings); parity docs, gaps,
ROADMAP updated
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Form controls:
- Placement: a control hanging from the baseline (as LibreOffice places
those it makes) was saved with no placement. LibreOffice then puts it
at the line's top, so every control row shrank. Its raise is now kept
(`ContentControl::form_raise`, read as in-line frames are) and
written, standing on the baseline when it had none.
- Multi-line fields: these were saved without LibreOffice's `MultiLine`
property, so they showed one centred line. They now carry it.
- Text fields get LibreOffice's flat border.
- Also: `pt()` no longer writes "-0pt".
Custom shapes:
- A shape drawn from its own geometry was saved as WordCraft's path of
it, and a preset WordCraft draws as a rectangle (a cloud) was saved as
a rectangle. The geometry as read (type, path, equations, handles) is
now kept (`ShapeExtra::odf_geometry`) and written back, mirrored as
the shape now is.
- `shape.change` and the ink-to-shape conversion drop the kept geometry,
since the shape is then another kind. `ShapeExtra` holds it as an
`Arc<String>` to keep `Placed::Shape` small.
- The reader's `end` hands skipped elements to `end_skipped`.
Results:
- The forms document round-trips pixel-identical (2,949 pixels before),
with its text the same.
- The shape presets fall from 2,467 to 1,220. The rest is LibreOffice's
hairline outline, which WordCraft keeps as 0.5 pt.
- Across the corpus the round-trip difference falls from 45k to 41k
pixels. 42 of 125 documents round-trip pixel-identical, 92 with their
text the same, and none gets worse.
gaps.md row 19 and the ROADMAP log are updated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Found with LibreOffice's style templates.
- An in-line frame placed against the text (`style:vertical-rel` "text"
or "char", with `middle`, `top` or `bottom`) stood on the baseline. It
is now raised or lowered against the text's height, from the size of
the text it sits in. Measured in LibreOffice, `middle` centres the
frame on the text: its middle half the ascent less the descent above
the baseline. Placement against the line still stands on the
baseline.
- An in-line picture or chart was saved with no placement style. In
LibreOffice that puts it at the line's top (measured: the title beside
the Finances logo moved up 19 pt). It is now saved standing on the
baseline ("top" to "baseline"), as WordCraft and Word show it.
Two templates' round-trip differences fall from 1,874 and 1,433 pixels
to 521 and 586. Across the corpus the difference falls from 47k to 45k,
and no document gets worse.
Left in these templates:
- template instantiation: LibreOffice refreshes a template's fixed dates
and fills its sender fields from the user's data when opening it;
- a first-page footer's frame placed against the page content;
- a page background picture centred in the margins rather than on the
page.
gaps.md row 19 lists them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Charts: on save, WordCraft wrote each chart anew from its chart model
(type, data, title, legend, labels), losing the look it doesn't model:
fonts and sizes, axis and grid lines.
- The chart object as read is now kept with the chart (`Chart::source`
in the flow model, `Graphic::source` in the document).
- `chart::redraw` keeps it when the chart is drawn again on open or
resize.
- The ODT writer writes it back whole while it still reads as the same
chart. An edited chart is written from the model, as before; DOCX
still writes charts from their model.
- The chart documents now round-trip pixel-identical (chartcol: 5,917
pixels to 0).
LibreOffice's serif business letter (4,223 pixels to 116):
- A text frame outlined by a drawn stroke (`draw:stroke`, a 0 width a
hairline) and no `fo:border` lost its outline. It is now the frame's
line; an explicit "none" border still wins.
- A header or footer whose style states no height, or that has no style,
was 0 tall. LibreOffice makes it 0.5 cm (measured by varying the
height), so the text had moved up 1.5 pt.
Across the corpus the round-trip difference falls from 60k to 47k
pixels, and 41 of 125 documents round-trip pixel-identical. No document
gets worse.
gaps.md row 19 and the ROADMAP log are updated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Found with LibreOffice's agenda templates. Saving wrote a table's first
row as `table:table-header-rows`, which LibreOffice repeats at the top
of each page, so a table crossing a page showed its first row twice
("<bring>" twice). The cause: the flow model marks a first row as a
header when the table style's look has a header row, which Word's look
has by default. That only affects the style's formatting, and HTML and
Markdown still rely on it for heading cells.
- The flow table now carries how many rows repeat
(`TableExtra::header_rows`, Word's Repeat as header row).
- The ODT writer writes only those rows as header rows.
- That extra block is now always kept for ODT flows, where it had been
dropped from tables without an alignment, width or row height.
All 16 agenda templates now round-trip with their text the same; the
modern and simple ones fall from about 5,200 differing pixels to 145.
Across the corpus, documents with the same text after a round trip rise
from 75 to 91 of 125, and the round-trip difference falls from 82k to
60k pixels.
gaps.md row 19 and the ROADMAP log are updated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
* DOCX: VML horizontal rules take their line
A web page's <hr> pasted into Word is a VML rule: `v:rect` with
`o:hr="t"`, often `width:0`. WordCraft took the width as written and
drew a 1 pt dot where Word draws a line across the page.
Measured on Word with a synthetic document: a rule with no width and
no `o:hrpct` spans the line inside the paragraph's indents; `o:hrpct`
is a share of it in tenths of a percent (500 = half); `o:hrpct="0"`
keeps the shape's own width; `o:hralign` places a shorter one (left,
centre, right); `fillcolor` and `stroked` apply as to any VML shape.
WordCraft now matches each case within 0.1 pt.
- wordcraft-doc: ShapeExtra::hr (HorizontalRule: share, alignment,
Word's standard look).
- wordcraft-docx: `o:hr`, `o:hrpct`, `o:hralign`, `o:hrstd` read; a rule
is written back as the same VML rule (DrawingML has none), and Word
opens the re-saved file with the same lines.
- wordcraft-layout: a rule takes its whole line and is drawn at its
share; measured for a table column it asks for no width, so it
follows its column. (Word draws a rule in a cell at the page's text
width, centred on the cell and past its edges; it stays in the cell
here.)
docs/file-format-parity.md is updated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Horizontal rules: only an inline, shown rule is one
Review: the rule arm of the writer ignored the shape's placement, so a
rule imported with position:absolute or visibility:hidden came back
inline and visible. Only a rule in the text and shown is read as a rule
now (a pasted <hr> is one); a positioned or hidden one stays a plain
shape, which keeps both when saved. The writer checks the same.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Horizontal rules: a see-through fill is kept; column measuring asks for the right width
Review: `write_hr` wrote only the fill's colour, so a rule with `v:fill
opacity` came back opaque after a save; the opacity now goes back as `v:fill`.
Review: measured for a table column, every rule asked for no width, so one of
its own width (`o:hrpct="0"`) could end up clipped by a narrow column; it now
asks for its width. AutoFit to contents measures on a line of its own width
that the rule took for a real line, so a rule sharing its line made the
column as wide as it could go; any measuring width now counts.
`Placed::Shape` boxes its extras: with the rule, `Placed` went past clippy's
large_enum_variant limit.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Horizontal rules: placed in what the line has left; rotation and flips kept on save
Review: a whole-line rule ignores a first-line indent or a line narrowed by a
float. Measured in Word, it does too: the width stays the share of the
paragraph's width and the rule runs past the margin, or under a float on its
right. What did differ was the placement: Word centres and right-aligns a rule
in what the line has left, with a first-line indent moving the end of that room
along, and a right-aligned rule beside a float was drawn off the page here. The
display now places it that way (`ParaLayout::rule_room`).
Review: a save dropped a rule's rotation and flips; they now go back in its
style, as Word writes them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* docs: VML horizontal-rule revision row at the top of the history
---------
Co-authored-by: Daniele Mori <Dinasty@hotmail.it>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Shapes: a solid fill keeps its transparency
A shape's fill colour can carry a:alpha, its opacity. WordCraft dropped
it, so a translucent white wash laid over a picture was drawn opaque and
hid the picture. The transparency is now read into the shape, drawn on
screen and in the PDF, and written back.
* Fix#1600 freeform and soft-edge fill opacity
* #1600: wrap canonical caret sampler signature
* #1600: format canonical integration
* #1600: assert canonical DOCX alpha round-trip
* #1600: document canonical shape opacity API
* Adapt alpha fixture to rectangle render bounds
* docs: one file-format-parity row for soft-edge fill opacity, status line
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Found with LibreOffice's report templates and one-page résumé.
Padding without a border:
- LibreOffice gives a paragraph's padding room on every side, with or
without a border; measured, 0.5 in of padding and no border moves the
text 0.5 in in and down. WordCraft dropped it.
- The reader now keeps it (an invisible border holding the space; a new
`Borders::takes_room()`), and the writer writes it back.
- The layout adds it to the spacing or indent under the document
setting, now renamed `Settings::odf_layout` to cover all of
LibreOffice's layout rules. `ResolvedPara::padding` carries it, so
Word documents are unchanged.
Columns:
- Unequal columns (`style:column` relative widths and indents, on pages
and sections) were made equal. They now keep their widths and are
written back as shares. The writer leaves out `fo:column-gap` beside
them, because LibreOffice ignores a page's column widths when a gap is
stated (checked).
- Columns with no stated gap have none, where they had Word's 0.5 in.
- A paragraph starting a column (`fo:break-before="column"`) now starts
with Word's column break, written back on the paragraph.
The report templates round-trip to 0-11 differing pixels (from up to
9,600), and the résumé to 24 (from 6,286) with its text the same.
Across the corpus the round-trip difference falls from 155k to 82k
pixels. WordCraft's own rendering difference falls from 469k to 428k,
and no document gets worse.
gaps.md row 19 and the ROADMAP log are updated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
LibreOffice sizes a line holding only in-line pictures by the pictures
alone. Its font's ascent and descent don't count: measured in
LibreOffice, a 3.6 pt rule's line is 3.6 pt, where WordCraft (following
Word) made it 15.5 pt.
- A new document setting, `Settings::object_lines_fit_objects`, makes
the layout size such lines by the pictures alone. The ODT reader turns
it on, so other documents keep Word's layout. An equation or any text
on the line keeps the font's height.
- A document with no page layout at all (no styles.xml) opened on Word's
Letter page with 1 inch margins. It now uses the region's paper with
LibreOffice's 2 cm margins.
WordCraft's own rendering of LibreOffice's elegant agenda comes close to
LibreOffice's: its pixel difference halves, from 17,428 to about 8,950.
Across the corpus WordCraft's rendering difference falls from 487k to
469k. No document gets worse, and round trips are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Found with LibreOffice's elegant agenda:
- Paragraph size: a paragraph holding only pictures lost its own font
size, since the flow model's picture runs carry no formatting, so its
line grew. Such a paragraph (`Para::textless`) now keeps its formatting
as the paragraph mark's, which its pictures' runs take too. Read and
written as for empty paragraphs.
- Raise: an in-line frame's raise was dropped when a parent style gave
it a relation no in-line frame has (the Graphics style's
`style:vertical-rel="paragraph"`). It is now measured from the baseline,
as LibreOffice reads it.
The agenda's round-trip difference falls from 6,542 to 1,331 pixels, and
two business fax templates' from about 5,300 to 270 and 350. Across the
corpus it falls from 185k to 155k. No document changes page count.
WordCraft's own rendering of a picture-only line is still taller than
LibreOffice's, a layout difference left for later.
gaps.md row 19 and the ROADMAP log are updated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Found with LibreOffice's report templates.
Tables:
- A table filling the margins (`table:align="margins"`) but wider than
them ran off the page. It is now fitted to the text width, its columns
in proportion. Checked in LibreOffice, which fits such a table with or
without relative column widths; the old test's claim otherwise is
corrected.
- A table's own space above and below (`fo:margin-top` and
`fo:margin-bottom` on the table) was dropped. It is now read into new
`TableProps::space_before`/`space_after`, laid out (added to the
spacing of the paragraphs around it, as LibreOffice does) and written
back.
Headers and footers:
- A header taller than its band lost its spacing from the body, moving
the text up. LibreOffice keeps the spacing below the content unless it
is dynamic (`style:dynamic-spacing`, which behaves as Word does). New
`SectionProps::header_gap`/`footer_gap` hold it. The layout keeps it
past a tall header or footer, and the writer writes it back. Word keeps
no gap, so DOCX documents are unchanged.
Across the 125-document corpus, the round-trip pixel difference falls
from 241k to 185k, and WordCraft's own rendering's difference from
LibreOffice's falls from 562k to 484k. No document changes page count or
gets worse; one report template falls from 7,646 to 602 pixels.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
A frame that doesn't state its anchor or position now takes them from
its graphic style chain (ODF lets `style:graphic-properties` carry
`text:anchor-type`, `svg:x` and `svg:y`).
LibreOffice's business card template relies on this:
- its Labels style holds the card in line;
- its Graphics style puts the credit at the top of the page.
WordCraft had floated the card, so a save scrambled the layout and added
a page.
Across the 125-document corpus, no document now changes page count
through a save (3 did), and the round-trip pixel difference falls from
333k to 241k. gaps.md row 19 and the ROADMAP log are updated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Saving LibreOffice's letter and fax templates added a page and moved
their logos. Fixes:
- Default font size: the writer always wrote the default style's size as
12 pt. It now writes Normal's size (11 pt in these letters).
- Page-anchored frames: a frame placed "from the paragraph" was moved by
the page margin. A page has no paragraph, so it is now placed from the
page, and "from the paragraph's content" from the page's text area, as
LibreOffice places it.
- Text box styles: a custom style used only by paragraphs in text boxes
(the fax's centred "Frame contents") was dropped. The style pass now
walks text boxes and groups.
- Empty paragraphs: an empty paragraph's own font size (its height) was
dropped. It is now kept as the paragraph mark's formatting, a new
field in the shared flow model that the ODT reader and writer use.
The marine, fax and bottle letters keep one page after a save. Over the
125-document corpus the round-trip pixel difference falls from 408k to
333k, and the business letters' differences roughly halve.
Also moved a doc comment that 48c60a5 left on the wrong function.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
gaps.md row 19 now lists what's left in ODT:
- turned characters;
- conditional text;
- control looks;
- embedded spreadsheets' contents;
- dates in non-US locales.
The ROADMAP progress log has the entry.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
- The document's default font size (`fo:font-size` in
`style:default-style`, or the Standard style's: the document's
defaults) was ignored, leaving 12 pt; LibreOffice's letters are
10 pt. It is now the document's default. A named style with no parent
keeps the default style's size, as ODF inherits it.
- A date style ordered by the locale (`number:automatic-order`) showed
its parts as listed: "2026November2". It now shows in US English
order: "November 2, 2026", or "11/2/2026" with a numeric month, as
LibreOffice shows it here.
WordCraft's own rendering of LibreOffice's letter templates comes much
closer: one letter goes from 11,377 to 6,237 differing pixels.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
A page layout's background picture (`style:background-image`, §17.3:
LibreOffice's report templates' world map) was dropped. It is now
WordCraft's page picture (Design › Page Color › Fill Effects) and is
written back with its picture:
- repeated: tiled;
- stretched: stretched;
- not repeated: centred at its own size, a new fill that the screen
renderer and PDF export draw in the middle of the page. DOCX writes
it stretched, as VML has no centred fill.
LibreOffice's report template with the map goes from 11,719 to 3,602
differing pixels, and shows the map after a save.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
- A table starting a page (`fo:break-before="page"` on the table,
LibreOffice's agenda minutes) didn't. Its first paragraph now has a
page break before it, and it is written back on the table.
- Layout: a page break before the paragraph in a table's first row
now moves the whole table to the next page, as Word does. It was
ignored; this matters for Word documents too.
- ODT tables are now fixed layout (Word's `w:tblLayout`).
LibreOffice's columns never fit their content.
LibreOffice's 6orange agenda now round-trips with the same text.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
* #3660: refuse a package that declares too many zip entries before zip parses them
zip::ZipArchive::new parses and keeps every central directory header
the end record declares before its caller can look at len(). A ZIP64
end record can declare one per 46 bytes of the file: a 47 MB package of
one stored file listed 1,000,000 times takes zip 3.0.0 about half a
second and a large transient allocation, and len() then says 1, since
the copies share a name, so the docx reader's MAX_ENTRIES cap never
fires. ODT and spreadsheet packages had no cap at all.
wordcraft_doc::zip_guard::check finds the end records the way zip finds
them (backwards; the ZIP64 record from the locator's offset on; a plain
record when it has no entries or a central header before it) and refuses
a package declaring more than the reader's limit. The docx package
reader, the ODT reader, the spreadsheet reader (mail-merge data) and the
template-title probe call it first, with 20,000 entries as the limit.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* formats: keep the extensions doc line on EXTENSIONS
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Count the runs proofing text walks, instead of timing it (#5185)
`proof_text_walks_the_runs_once` was the one linear-time test here that timed
its walk, and the ratio crept over its 24x limit when the crate's tests ran in
parallel -- 28.2, 26.4, 25.6 -- from cache and memory contention rather than
from any regression.
The file's own module doc says why the others don't have this problem: "The
cost is the steps the lookups' walks count (crate::work), not a timing, so a
busy machine can't make a linear lookup look quadratic or the other way round."
It then says this one is timed because "proofing text, whose walk is the
document model's" counts no steps -- but `proof_text` does the walk itself,
advancing a runs iterator alongside the text, so it can count the runs it looks
at like every other walk here. Nothing in `wordcraft-doc` had to change.
before 8x the runs took 28.2x the time (limit 24), under load
after 50000 steps for n, 400000 for 8n, ratio 8.0 (limit 12)
The count is the same on any machine under any load, so the flakiness is gone
rather than made less likely: raising the limit to 32x would have left the same
failure available on a busier machine. It is also about 100x faster -- 0.03 s
against three rounds of eight repetitions -- and `work::steps` is `#[cfg(test)]`
inside, so release builds are untouched.
The test still catches what it was written for. Putting the quadratic walk back
(the run for each character found from the first run, every time) gives:
proof_text: 1250025001 steps for n, 80000200001 for 8n, ratio 64.0
panicked: 8x the input took 64.0x the steps: not linear
Verified under the reported condition: three runs of the whole crate suite in
parallel, 559 tests, all green.
* linear tests: proofing text is counted now, not timed
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Word's Font › Emphasis mark (a mark over or under each character, used
to stress East Asian text) wasn't modelled. DOCX `w:em` and ODT
`style:text-emphasize` were dropped.
- Model: `CharProps::emphasis` (dot, comma, circle, dot below, or none
to turn off a style's).
- Layout: a mark is drawn over (or under) each character, and the line
is made taller to fit it.
- `format.emphasisMark {"mark": …}` sets it, and Format state reports
it. The catalog lists it under Home › Font.
- DOCX: `w:em` is read, and written in its place in `w:rPr` (after
`w:cs`, before `w:lang`).
- ODT: `style:text-emphasize` maps to it: an accent is the comma, a
disc the dot, a dot below the under-dot.
Also fixes two problems from the previous commit (ODT variables):
- Field updates blanked a SET field's stored result. The layout
already draws nothing for SET, so its result stays as it was, as
`ask_and_set_fields_draw_nothing` pins.
- A clippy lint (manual char comparison) failed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
- ODT variables (`text:variable-set`, `text:variable-get`, §7.4) were
read as their text. A set is now Word's SET field, followed by a REF
when it is displayed; a get is a REF. They are written back declared
(`text:variable-decls`), the sets hidden with a get after them.
- The engine now evaluates SET (ECMA-376 §17.16.5.58). It shows
nothing and gives its name a value. REF to a name no bookmark has
shows that value; a REF before the SET shows the last value set, as
Word's bookmark does after an update. This works for Word documents
too.
- Custom character styles now keep what they turn off under a parent
that turns it on (`fo:font-weight="normal"`…), as paragraph styles
already do.
A LibreOffice document with variables round-trips with the same text,
and the saved file validates against the schema.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
gaps.md row 19 now lists what's left in ODT after the template work:
- emphasis marks and turned characters, which have no WordCraft model;
- variable fields;
- control looks;
- embedded spreadsheets' contents;
- tables wider than the margins;
- what a character style turns off.
The ROADMAP progress log has the entry.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
More from LibreOffice's bundled templates:
- WMF and EMF pictures (LibreOffice's fax and letter logos) were
dropped. They now open as pictures, at their own size (a placeable
WMF's or an EMF's frame) when the frame gives none, and are saved
with their media types.
- A floating picture inside a text box, saved by WordCraft, didn't
show in LibreOffice. Picture frames' styles now derive from the
Graphics style (declared, like Frame), which LibreOffice needs to
show it.
- A named paragraph style turning off its parent's bold (agenda
dates under bold titles) showed bold, both in WordCraft and in
LibreOffice after a save. What a style turns off (bold, italic,
underline, strike-through) is now kept and written.
- Columns' shares (`style:rel-column-width`) are now written only for
tables filling the margins. LibreOffice lays out an aligned table
oddly with them: WordCraft's sample table lost its proportions.
- Drawings waiting for a paragraph now join only a paragraph of the
text itself, never one in a text box or note.
With the harness's paper setting fixed (it had made LibreOffice draw
unsized pages as Letter), most of the 78 templates compare much closer
page by page. The CV template and the contour sample are now
pixel-identical.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
More fixes from LibreOffice's bundled templates:
- A page margin the file leaves unsaid was 1 in, and a page layout with
no properties at all was ignored. Both now take LibreOffice's
defaults: 2 cm margins (observed black-box). LibreOffice's CV template
now lays out as LibreOffice draws it.
- Drawings anchored outside any paragraph (LibreOffice's
page-anchored frames before the first paragraph) made a paragraph of
their own. That paragraph started the document on the default page
style rather than the one the first paragraph asks for, which put the
running header on a letter's first page and pushed the letter onto
two pages. They now join the next paragraph; before a table or at the
end, they still get a paragraph of their own.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
LibreOffice ships 78 text templates (letters, faxes, agendas, reports,
CVs). Round-tripping them through WordCraft exposed these problems:
- Placeholders (`text:placeholder`, "<Recipient's name>") were
printed text. They now open as plain-text content controls showing
them, so a click selects one and typing replaces it. Their
description becomes the control's title. They are written back as
placeholders of their type while they still show; what was typed is
written as text.
- A fixed date with neither a value nor text was lost. It is now a date
field.
- `text:author-name` opens as USERNAME, which the engine left empty.
USERNAME and USERINITIALS now show the user's name and initials
from File › Options; a quoted text after the name is shown instead.
- A "First Page" master followed by another (`style:next-style-name`)
put the running header on the first page. It is now a section with a
different first page: its own (empty) header on page 1, the next
master's after that.
- A page layout without a size was Letter. It is now the default
page's, the user's region's, as LibreOffice uses its default paper.
ODT import takes the regional page like the other importers.
- Style-only templates (no `content.xml`) failed to open. They now
open empty with their styles.
- Table columns are now written with their share of the table
(`style:rel-column-width`) too. A table filling the margins of a
narrower page keeps its proportions in LibreOffice.
All 78 templates now open and round-trip.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
An alternative format chunk holding a Word document with w:matchSrc keeps its
own styles: a style the document already has comes along under a new id, the
chunk's document defaults (and Word's, where they say nothing) go into its
base styles, and its unstyled paragraphs use its own Normal. Without
w:matchSrc the document's styles win, as before. Adopting another document
now also renumbers table styles and the revisions of table, row and cell
property changes.
A document whose chunk shares style names with it (Normal with an exact line
height, an italic Subtitle) ran a page longer than in Word: the chunk's tables
took the document's styles. It now keeps its own.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Word brings a document's alternative format chunks (w:altChunk) in where they
stand when it opens the file; WordCraft left them out, so a document made of
one (as generators and mail-merge tools write them) opened empty.
- docx: read_with/ReadOptions with a ChunkImporter for formats other than
WordprocessingML; nested Word documents are read here (at most 4 deep,
256 chunks and 512 MB of chunk bytes a file, XML depth counted on).
- doc: Document::adopt (moved from paste) brings another document's media,
lists, styles, notes, comments and revisions along under new ids; pictures
in groups and charts are relinked. Insert > Text from File uses it and now
keeps the file's pictures and lists.
- engine: chunks in MHT, HTML (in their charset), RTF and plain text go
through the format importers.
- formats: MHT web archives open (MIME, quoted-printable/base64, charsets,
pictures by Content-Location or cid). HTML reads style element rules
(simple selectors, cascade, budgets), paragraph margins, indents, line
height, cell widths and borders; an opened page takes Word's web-page
defaults (Times New Roman 12 pt, single lines, black headings, automatic
spacing). html::decode knows the single-byte Windows code pages.
docxide-pdf suite: croatian_regulations_altchunk goes from one empty page to
Word's 8 pages, SSIM 2.7% -> 78.7%; no other document changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Hidden form controls (`form:hidden`: a name and value the form sends,
not shown) were dropped. They are now kept verbatim, with their
properties, and written back into the form with ids of their own.
- OpenDocument text templates (`.ott`) weren't opened. They now open
as documents, and save as templates: the template's media type goes
in `mimetype` and in the manifest's root entry (ODF 1.3 Part 2 §3.3).
This works with a password too. `.ott` is listed wherever `.odt` is:
open and save formats, file dialogs, export, the web app and its
media type.
A LibreOffice template round-trips with the same text. 300 fuzzed
documents exercising custom shapes, cell formulas, kept parts, turned
text and forms caused no crashes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
- craft-proof now names ja, zh and th in missing_dictionary: packs::missing_dictionary hides it
for a pack language when no pack for it is listed (status bar and Options).
- de-CH and pt-PT are pack languages in craft-proof (de-ch, pt-pt): names, hyphenation and
grammar stay German and Portuguese (tests); pack names fall back to the region-aware name.
- About › Language data shows craft_proof::scowl::notice() when SCOWL is embedded (test).
- Flatpak manifest's craft-i18n commit follows craft-i18n.rev.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCX8LsYYE8fsj4byBm2
- proof.packs reports index_override; the CLI prints the test source; the bar's Install tooltip
says it turns on downloading of fonts and Language packs, and names a test source.
- Docs: Install works once language-packs-1 is published (until then only a test index); with a
test index the sha256 only catches a broken download.
- About › Language data keeps its size: a fixed-height scrolling list, licence texts read again
only when the dictionaries change.
- The engine's Cancel is the font store's own flag (no snapshot), so a cancel stops a fetch or a
stalled download too.
- Index text shown without control, bidi or format characters; long names cut; the bar works out
what to offer again when the list changes (index generation, not its length).
- ui_shot's store is a temporary folder (or storeDir); tests reset the backend even on panic; a
fixture pack proves per-run proofing and hyphenation from a pack.
- The default-build check follows craft-proof's carry-over (de, pl, pt, it, ru embedded until packs
ship; CRAFT_PROOF_EMBED=en is English only); the Polish hyphenation check runs again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCX8LsYYE8fsj4byBm2
- Install, Show available languages and Refresh turn on the font store's downloading only on the
person's own click (input_from_control, as in #959); a faked click says why instead.
- proof.installPack and proof.packs {refresh} run on the engine's thread in the app ("started"),
with progress, results and errors in proof.packs; the CLI and headless MCP stay synchronous.
- A session's layout is keyed on the dictionaries' generation, so parked documents proof again.
- proof.removePack refuses while that pack installs; pack commands that need a locale are left out
of Search; options text names Refresh; licence tooltip says Source; errors go through tl!;
the bar rescans at most once a second while typing; English names for every pack language and
sr-latn; About has one Close button; xtask doc comment back on cmd_i18n_report.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCX8LsYYE8fsj4byBm2
- `review.issues` and `file.options` report a run's language with `ProofLang::tag()`, so a
Pack language reports its locale, not "".
- The test-source warning reads craft-font-store's `language_pack_index_overridden()`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCX8LsYYE8fsj4byBm2
- craft-proof (benandez/craft-libs 6ae4f03, storytold/craft-libs#485) and craft-font-store /
craft-font-catalog (630e42f, #486) by git rev instead of local paths.
- ProofLang::Pack: the bar offers every language with a pack (zxx/und never).
- Options › Language warns when CRAFT_LANGUAGE_PACK_INDEX supplies a test index.
- Pack `source` (upstream link) when the index gives it, else the archive.
- The bar's close button is the code-drawn close icon: "✕" had no glyph in the interface fonts
and egui panicked drawing it.
- `cargo xtask language` allows our own ru-extra, which stays embedded.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCX8LsYYE8fsj4byBm2
- engine `packs`: the packs Backend (the font store on the desktop and CLI, a fixed list in tests
and ui_shot), the pinned index, installs and removals through craft-font-store's
`language-pack` kind, craft-proof reading the store's `language-packs/` folder at once.
Commands open nothing and never turn downloading on (only an Install click in the app does);
confined automation can't write the packs folder outside its write root.
- ui-egui `language_packs`: File › Options › Language › Language packs (name, size, licence,
source, Install/Remove, progress, errors), the missing-pack bar (dismissible per document,
never for a language without a pack), About › Language data (full licence texts).
- CP4.4: `cargo xtask language` (in `ci`): the default build embeds only en-* Language data.
- CP4.5: docs (help, MCP, control protocol, gaps #8, localization parity, roadmap).
- Path deps to Lane 4's worktrees while developing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCX8LsYYE8fsj4byBm2
CodeRabbit on #5205:
- NOTICE: the SCOWL English dictionaries (en_US, en_GB-ise, en_CA) with
Kevin Atkinson's SCOWLv2 notice, Benjamin Titze's notice and Geoff
Kuenning's Ispell BSD licence for the affix files, as their licences ask of
distributions.
- docs/gaps.md: gap 8's evidence says each English checks its own SCOWL
2026 dictionary, with the #40 and #520 regression tests; #40 (closed) is no
longer listed as open. Status line and revision history.
Also: docs/localization-tr.md's craft-proof path change (3110dcf02, #5202)
and docs/architecture.md's no-data wording (b7dad64d9) get their status lines
and revision rows.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCX8LsYYE8fsj4byBm2
craft-proof moves to 0675d58: an English no longer takes another English's
SCOWL words (en-US flagged colourblind, en-GB colorblind), British English
keeps -ize, and English suggestions drop junk splits and names.
craft-i18n.rev and the Flatpak source move to storytold/craft-i18n#114's merge
commit (059cbf9: judgment/judgement right in every English).
No wordcraft test depended on the dialects crossing
(engine 1120 + 43, layout 578 pass). localization-parity's English row says so.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCX8LsYYE8fsj4byBm2
craft-proof moves to storytold/craft-libs#483's head (e6e948f, on #482's
9e5862a): each English checks against its own SCOWL rel-2026.02.25 dictionary
through the affix engine (ordinals via COMPOUNDRULE), with en-variants.txt as
the dialect policy. Lookup order: dictionaries folder, [English pack], SCOWL,
system Hunspell, the built-in Moby list; Moby stays for hyphenation.
craft-i18n.rev and the Flatpak source move to storytold/craft-i18n#109's merge
commit (efb1127), which adds the SCOWL files.
Typed-text tests pin British spellings in en-GB (#40), modern words (#520),
Canadian/Australian/NZ/Indian English (#1281, #1045) and ordinals; they skip
without the Language data, as the other data tests do. Docs: typing-parity,
localization-parity, ROADMAP progress log.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCX8LsYYE8fsj4byBm2
CodeRabbit on #5202:
- AGENTS.md, ATTRIBUTION.md, README.md, docs/architecture.md: without
CRAFT_I18N_DIR English spelling falls back to an installed Hunspell English
or craft-proof's built-in Moby list, and only pattern hyphenation is off
(Bulgarian, Turkish and Russian hyphenate by rule); they said English
wasn't spell-checked. (CLAUDE.md carries the same sentence; left for the
maintainer, as agents don't edit it.)
- NOTICE: craft-i18n's patterns are language-data/<lang>/hyphenation.pat,
not en-us.pat, pl.pat, pt.pat, de.pat, it.pat.
- docs/spelling-dictionaries.md: the Flatpak's dictionaries folder is
~/.var/app/ai.storyteller.wordcraft/data/wordcraft/dictionaries; the host's
folders are outside its sandbox.
- printing.yml: the repository checkout doesn't persist credentials.
- tests.rs no_language_data: also probes the American/British variant table,
so a craft-i18n checkout missing some files skips the dialect tests
instead of failing them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCX8LsYYE8fsj4byBm2
After custom shapes, cell formulas, kept package parts, turned text,
and control sizes and buttons: ODT is ~90% in file-format-parity (20–35
h left). gaps.md row 19 lists what's left in ODT:
- emphasis marks;
- turned characters;
- conditional and variable fields;
- hidden controls and control looks;
- embedded spreadsheets' contents.
The ROADMAP progress log has the entry.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Review fix. A button kept verbatim was still written as the button
after its content control was made another kind (a check box, a list).
The kept form XML is now used only while the control is still the
plain text control it was read as.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
On save, form controls were sized to their text. Buttons and other
controls WordCraft has no kind for were dropped.
- Sizes: each control keeps the size of its `draw:control`
(`svg:width`, `svg:height`), stored on the content control.
- Buttons, image buttons, labels, file and value-range controls, frames
and generic controls now show their label, locked, as a content
control. Their form XML is kept verbatim and written back as it was,
so LibreOffice's button round-trips as a button.
- A kept control that names a namespace WordCraft doesn't declare is
left out. So is one longer than 64 KiB.
- The `ooo`, `oooc`, `script` and `dom` prefixes that LibreOffice's
controls use are declared, so the content validates.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Text turned down or up opened across. This covered table cells and text
boxes (`style:writing-mode` §20.404, and LibreOffice's own
`loext:writing-mode="bt-lr"` for upward text).
- Table cells now open and save with WordCraft's cell text direction.
- Text boxes now open and save with their text direction.
LibreOffice's turned cells render as LibreOffice draws them. LibreOffice
reads WordCraft's turned text boxes back identically.
Turned characters (`style:text-rotation-angle`) still open upright:
WordCraft has no turned characters.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Package parts WordCraft doesn't read were dropped on save. These
include LibreOffice Basic macros and dialogs (`Basic/`, `Dialogs/`),
`manifest.rdf` and other applications' files. They are now kept as
they are and written back with their manifest entries. LibreOffice
finds a round-tripped document's macro intact; WordCraft never runs
macros.
Dropped on save: the old thumbnail, and digital signatures
(`META-INF/*signatures*.xml`), because they sign the package as it
was. Also dropped: paths that climb out of the package, and paths
WordCraft writes itself (pictures, embedded objects).
Kept parts are bounded: 1000 files, 64 MiB in all. They survive
password protection.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
ODT cell formulas (`table:formula`) were lost, and only their value was
kept as text.
- Reading: LibreOffice's formulas, in its own syntax
(`ooow:sum <A1:A3>`, `<B1>*<B2>+<B3>`, `mean`, `min`, `max`,
`product`, `abs`, `sign`, `count`, `add`/`sub`/`mul`/`div`/`pow`, lists
joined by `|`), open as Word formula fields (`=SUM(A1:A3)`) showing
the cell's value. Update Field recalculates them.
- Writing: formula fields in cells are written back as cell formulas
with their value. ABOVE, LEFT, BELOW and RIGHT become the cells they
name.
- Cells holding a plain number are written as numbers, so LibreOffice
calculates with them. The `ooow` prefix is declared; without it,
LibreOffice reports "Expression is faulty".
A formula one side can't say keeps its value as text. A LibreOffice
table of sums round-trips with the same text, and the saved file
validates against the schema.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Review fixes to the custom shape geometry:
- An equation that couldn't be worked out wasn't remembered. Equations
each referring twice to the next, ending in one that refers to
itself, took about 2^64 steps. Each equation is now worked out once,
failures and those being worked out included.
- Points far outside the view box (1e300) became infinite as f32. They
are now clamped.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
A custom shape whose type WordCraft has no kind for (hexagon, octagon,
smiley, can, moon, lightning, block arc, cross, pentagon, flowchart
shapes…) opened as a rectangle. It is now drawn from its own geometry
(ODF 1.3 §10.6.2) as a freeform:
- the enhanced path (§19.145): moves, lines, curves, ellipses (T, U),
arcs (A, B, W, V) and quarter ellipses (X, Y), arcs followed in
short straight steps;
- its values worked out from the shape's equations (§10.6.3) and
adjustment values: numbers, other equations, modifiers, the frame's
keywords, + - * /, abs, sqrt, sin, cos, tan, atan, atan2, min, max
and if.
Path length, equation count and nesting, and points are all bounded.
LibreOffice fills no part of a `draw:path` that has an open part. So a
freeform with both closed and open paths is now saved as a custom shape
whose path leaves the open ones unfilled (`F`).
LibreOffice's preset shapes render as LibreOffice draws them. The
saved file validates against the schema.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
ODT citations (`text:bibliography-mark`) were read as their text, and
the sources they carry were lost. So an ODT bibliography had nothing
to update from.
- Reading: each mark is now a `CITATION` field of its source, which
becomes one of the document's bibliography sources (the first mark
of an identifier gives it). The identifier is the tag, the type the
kind, plus author, title, year, publisher, address, journal, volume,
pages, URL, editor, edition, number and month.
- Writing: a `CITATION` of a known source is written back as a mark
carrying the source.
References › Update rebuilds an ODT bibliography from them. A
LibreOffice citation and bibliography round-trip pixel-identical and
validate against the schema.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Linked text boxes (`draw:chain-next-name` on a `draw:text-box`, naming
the frame its text continues in) lost their link on open. The
following box's text was gone, since only the first box holds the
story.
- Reading: each box keeps its frame name and the name of the next box.
Once all boxes are made, names are resolved to WordCraft's link
(`TextBody::next`). A link to a missing box, to the box itself or
round in a loop is dropped.
- Writing: each box is named after its story, and a linked box names
the next one.
Flow model: `BoxLook::chain` (name, next).
A LibreOffice chain round-trips pixel-identical, and WordCraft flows
the text from the first box into the second. A linked box keeps its
own height where LibreOffice grows it to the rest of the text.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Two picture properties were dropped.
- Crop: `fo:clip` (top, right, bottom, left, in lengths of the
picture's own size, its pixels at 96 per inch) is now WordCraft's
crop fractions. A picture's crop is written back as `fo:clip`, with a
graphic style even for an in-line picture.
- Contour wrapping: `style:wrap-contour` with
`style:wrap-contour-mode` `outside` is Word's Tight wrapping, and
`full` (the default) is Through. The frame's `draw:contour-polygon`
becomes the wrap polygon, scaled from its view box. A polygon whose
points lie well outside its view box is in another coordinate system
(LibreOffice writes one for some pictures), so the outline is
derived from the picture instead. All of this is written back, the
polygon last in the frame.
A cropped LibreOffice picture round-trips pixel-identical, and a
contour-wrapped one round-trips with WordCraft wrapping text as
LibreOffice does. Both validate against the schema. `Body::start`'s
frame parts moved to a helper (clippy's complexity limit).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
This round added flow breaks, table placement, ruby, index marks, text
borders, connectors and custom properties. A 20,000-paragraph document
round-trips in about a second with nothing lost, and 400 fuzzed
documents opened without a crash.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Review of the custom property commit: an ODF date property may be a
bare date, while Word's `filetime` (which a DOCX save writes) wants a
UTC date and time. A bare date is now midnight UTC, a date and time
without a zone is taken as UTC, and a value that isn't a date is kept
as text.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
ODT custom document properties (`meta:user-defined` in `meta.xml`) were
dropped, and the fields showing them or a user field were read as
plain text.
- Properties: `meta:user-defined` values (string, number, true/false,
date) are now WordCraft's custom document properties, and so are
user field declarations (`text:user-field-decl`).
- Fields: `text:user-defined` and `text:user-field-get` are Word's
`DOCPROPERTY` fields, which WordCraft updates from those properties.
- Writing: custom properties go back into `meta.xml`, and a
`DOCPROPERTY` naming one is written as `text:user-defined`.
A LibreOffice document with a custom property and a user field
round-trips pixel-identical, valid against the schema. Its user field
comes back as a document property.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Review of the connector commit: a connector inside a drawing group
wasn't converted. Its group's shapes weren't recorded, so its ends
lost their glue. Group members are now recorded for their kind (never
for placement, since they sit in the group's coordinates), and
connectors in groups have their glue points made their shapes' sites
too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
ODT connectors (`draw:connector`) were left out. They now open as
WordCraft connectors: straight (`line`), curved (`curve`), or with
bends (`standard`, `lines`).
- Gluing: each end is glued to the shape it names (`draw:start-shape`,
`draw:end-shape`). The shape's four default glue points (§9.2.19:
top, right, bottom, left) become its connection sites. An end glued
to a glue point of the shape's own, or to a shape not read, is left
unglued.
- Placement: a connector's own coordinates are in LibreOffice's drawing
layer, not its anchor's. So a connector glued at both ends to shapes
anchored in its paragraph is placed between their sites.
- Writing: connectors are written back as `draw:connector` with their
type and glue, and the shapes they glue to get ids
(`xml:id`/`draw:id`). LibreOffice re-routes them from the glue.
LibreOffice's connector document round-trips with its connectors
drawn between the shapes, and WordCraft draws them between the right
sites. Other formats still get connectors as straight lines.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Polish/Portuguese/Czech review commands, the custom dictionary file and the two typing squiggle
tests pass without CRAFT_I18N_DIR at 48ed6f8. English dialects, regions' English and Hyphenation
Options still need the variant table and patterns, so they keep the skip.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCX8LsYYE8fsj4byBm2
storytold/craft-libs#482's new head: without Language data English spells from the built-in
Moby list plus en-extra with edit-1 suggestions, and a system English Hunspell loads leniently.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCX8LsYYE8fsj4byBm2
- wordcraft-proof is now `package = "craft-proof"` from craft-libs (local
path for now; TODO in Cargo.toml for the git+rev pin after the craft-libs
PR merges). `wordcraft_proof::` paths are unchanged.
- crates/proof and assets/{spelling,hyphenation} deleted with their
ATTRIBUTION.md rows; one row now points at craft-i18n's Language data;
NOTICE paths updated.
- craft-i18n.rev (and the flatpak source) moved to the craft-i18n commit that
adds language-data/ (CI sets CRAFT_I18N_REQUIRED=1, so the pin must have it).
- xtask layers: proof removed. Engine tests carry their own copy of the
synthetic Czech fixture (they reached into crates/proof/src).
- Docs: architecture.md, CLAUDE.md/AGENTS.md layer table, README build note
(CRAFT_I18N_DIR), localization-tr path, ROADMAP progress log.
Before/after wordcraft-cli on a 17-language proofing document: issues,
suggestions, manual hyphenation, PDF text and PDF bytes identical.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCX8LsYYE8fsj4byBm2
* Markdown export: a list inside a block quote stays in the quote
`> - one / > - two` was imported as quoted list paragraphs (the quote kind on each item) but
the list branch of the exporter ignored that kind and wrote `- one / - two`, so every save as
Markdown moved the list out of its quote. A quoted list item now takes `> ` on each of its
lines, nested levels and continuation lines included. The same paragraphs come back from a
.docx (Quote style with numbering), so the quote now survives that round trip too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Markdown export: a list after a quoted list stays outside the quote
* fmt
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Word draws an arrowhead 2, 3 or 5 times the line's width long and wide
(small, medium, large; `a:headEnd`/`a:tailEnd` `len`/`w`), a line under
2 points as a 2-point one. Every arrowhead was drawn one size and saved
as a medium triangle: the kind, width and length are now read (DrawingML
and VML), kept and written back, and the size is drawn as Word does.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* #5178: the line between columns is drawn for a section starting mid-page
Columns for selected text are a continuous section in the middle of a page, and
the line between columns was only added when a page started, down to the page
bottom. The lines are now drawn per section on each page, from the top of its
text there to the bottom of its tallest column, when the page or the section ends.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #5178: the line between columns spans the text's lines, not its paragraph spacing
Review: the line started above the section's first line (its space before) and
ended below its last (its space after). It now runs from the highest text line or
table cell of the section on the page to the lowest, falling back on the flow's
extent when there are none.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #5178: the column lines find the section's text by place, and draw nothing without it
Review: the section's items were the page's items after an index, which objects
behind the text (inserted at the front) shift; the flow's extent drew a line
where the section had only spacing; overflow lines of exact-height cells counted.
The text is now the page's top-level body lines and table cells below the
section's top; lines in cells count by their cell's box; no text, no line.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #5178: the column lines take the section's text by its blocks
Review: a floating table of an earlier section placed lower on the page would
pass a filter by place. The section's text is now the page's items of top-level
blocks from the section's first block on the page.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
The numeral and automatic-space tests compare two layouts of one text. Tests
running alongside share the font database, and one loading a font between the
two layouts can change the face a character falls back to: U+06DD drew in
Segoe UI in one layout and Noto Sans Arabic in the other on Windows, failing
arabic_mode_keeps_arabic_indic_digits_as_typed and
context_mode_follows_run_direction now and then, and
spaces_punctuation_hangul_and_latin_alone_get_nothing failed the same way. The
pairs are now laid out again until both use the same faces.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* #5066: .doc default font is the stylesheet's standard font
The .doc reader took the default character font from the font table's
first entry. A Word 365 .doc keeps Times New Roman there and names Aptos as
the stylesheet's standard font (Stshif.rgftcStandardChpStsh), so its text
came out in Times New Roman. The defaults are now the standard ASCII, East
Asian and complex-script (ftcBi) fonts, else entry 0 as before; runs'
sprmCRgFtc1 and sprmCFtcBi are read too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #5066: the complex-script standard font is read only when the header has it
ftcBi is optional in the Stshi, and the latent style data that follows it starts
with cbLSD (4): a header that leaves ftcBi out no longer makes cbLSD the
complex-script font.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #5066: a header ending with ftcBi = 4 keeps it
Review: a 4 at ftcBi's offset was taken for cbLSD even when the header ends
there, so a complex-script standard font of index 4 was lost. It is read as
left out only when more data follows.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
When a row's first part on a page that already holds something would leave
a cell empty because that cell's inline picture (one line, never split) or
first line runs past the room, the row moves on whole instead of leaving the
other cells' text beside the empty cell. An at-least row grown taller than its
minimum by its picture used to pass the #1742 check (room >= declared minimum)
and then split, the picture going on alone. At the top of a page such a row
still splits.
Co-authored-by: Harrison Smith <harrison@hsmith.dev>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Measured in Word for Windows: when a table row breaks across pages, a cell
aligned to the middle or bottom whose text all fits in the part of the row
left on the page is aligned within that part, as tall as the other cells'
text there (with its space after), and a cell whose text doesn't fit runs
from the top of the cell with the rest on the next page. WordCraft kept the
offset the whole row's height gave the cell, so a short centred label
beside a long cell went to the top of the next page and left its cell empty
on the first, and a long centred cell started far down the page.
The vertical offset each cell's content got is kept with the row, so a split
moves the content back to the top before it decides what fits.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Layout: tab leader dots spaced and placed as in Word
Measured in Word for Windows with six fonts at four sizes: Word spaces leader
dots by the dot's advance at the font size in whole 600-dpi pixels (the size
itself in whole pixels), so a TH SarabunPSK dot at 16 pt (2.59 pt) is drawn
every 2.64 pt and a Tahoma one at 22 pt every 6.6 pt. The dots sit on the
page's grid of that pitch, from the first place after the text before the
tab to the last one that ends before the text after it. WordCraft drew them
at the unrounded advance, half a dot after the text and 1.2 dots short of
the number, so a table of contents line had a dot or two more than Word's.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Layout: each leader dot's place comes from its grid index
The leader's dots were placed by adding the pitch to the last place, so on
a long leader the rounding of each addition added up. From 72 to 528 pt at
2.64 pt it came to more than the 0.001 pt allowed at the end, and the last
dot, which ends exactly on 528 pt, was left out. `leader_xs` now works out
each place as its grid index times the pitch.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Layout: name the leader slack and glyph limit
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Layout: leader dots use the font size rounded to whole pixels
Word rounds the font size to the nearest 600-dpi pixel before it rounds the
dot's advance (Arial 14 pt: 116.7 px, so 117, dots every 3.96 pt); taking the
floor drew them 3.84 pt apart, as measured at 11, 14, 17, 20 and 26 pt.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* leader_xs: saturate the glyph range end
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Lists: a level above counts its first number at the first deeper item
Word counts a list level that hasn't been used yet as started at its first
number when a deeper item comes first: after 10.1-10.4 with no level-1 item
before them, the next level-1 item is 11. WordCraft showed 10 in the deeper
labels but didn't count it, so the next level-1 item repeated it ("10.
Qualifications", then "10. Penalties" in a tender document whose sub-items
come first).
Counters::next_label now starts each unstarted level above the one it counts,
at that num's start override if it has one, else the level's start. Measured
in Word with ListFormat.ListString: 1.1, 1.2, 2., 3.; (1), (2), 2. when the
deeper text doesn't show level 1; 1.1.1., 1.2., 2. from level 3.
a_list_s_own_level_definitions_win expected the old count; its level 0 item
after level 1 items is now 2., as in Word.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Lists: record the counting fix in the progress log and gaps
AGENTS.md asks for the progress log and the gap list when work lands. The
ROADMAP progress log has the entry; gaps.md records that no ranked gap
changed. Each with its status line and revision.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Lists: test a num's start override for the level above
The deeper-item-first test now also gives the num a start override for
level 0 (10) under level-1 items: 10.1., 10.2., then 11. It fails if the
override is ignored for the level above (1.1., 1.2., 2.).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Test a start override of 5 and a restart after a level-1 item
Review: 5.1., 6., 6.1. with the num's start override, and level 2 restarting below the next level-1 item.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
LibreOffice writes a border around text as `loext:border` (or its
sides) with `loext:padding`; ODF 1.3 has no attribute for it. It was
dropped. It is now read as Word's text border (one line all round, the
first side with a line, the padding its distance) and written back
the same way, which LibreOffice draws. A document with a text border
is then extended ODF rather than strict.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
* #5036: paragraph side borders lie beyond their distance from the text
push_para centred the left and right rules on the distance, so a 3 pt border
at no distance reached 1.5 pt into the text and, drawn after the lines, covered
the first letter. In a heading whose border matches its shading the letter
looked cropped, on the page and in the ribbon's style tiles. All four lines now
lie outside the distance, as the top and bottom ones did. Top and bottom reach
the corners and the shading fills out to the outer edges, so no seam shows
where rules and shading meet.
* #5036: pin the right border on its own in the side borders test
The test only compared the right border with the end of the top rule, and both come from the same value, so a wrong right edge still passed. Check it against the line's own bound.
* docs: progress lines for #5088
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Found while testing crates/formats/src/latex/export.rs:411-444 (escape_text, `c => o.push(c)` for ' ')
Co-authored-by: Claude Haiku 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* T280: anchor header drawings below tall headers
* #2485: share rendered header boundary with pins and obstacles
* docs: layout-parity status line for #2485
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Gap 19's row now says what ODT reads and writes and what is left, and
its estimate drops from 18–27 h to 10–16 h. The roadmap's progress log
covers the ODT work since text boxes: shapes through password
protection, forms, ruby and flow breaks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
ODT index marks (`text:alphabetical-index-mark`) were dropped. So
References › Update Index on an opened ODT index found no entries and
left the old list in place. Now:
- a mark at a point is Word's `XE` field, its `text:key1`/`text:key2`
the levels above its entry;
- a mark over text (`-mark-start` … `-mark-end`, in one paragraph) is
an `XE` field whose entry is the marked text, which stays text;
- `XE` fields are written back as point marks.
Engine: Update rebuilt only lists in WordCraft's own form, a paragraph
holding the field. A list held as a field around its entries, as ODT
and Word files hold an index, bibliography or table of figures, is now
first made the field's own paragraph, then rebuilt. That happens only
when the field starts its paragraph, so no document text is replaced.
A LibreOffice document with an index mark round-trips pixel-identical,
the mark kept.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Ruby (`text:ruby`, ODF 1.3 §6.4: a base text with ruby text over it,
furigana or pinyin) was read as its base and ruby text run together,
and the writer wrote any ruby as plain text (its comment wrongly said
ODF has none).
Ruby is now read as WordCraft's Phonetic Guide. It is written back as
ODF ruby, above its base and centred, with an automatic ruby style.
A ruby inside a tracked change is still written as its base text,
which the change marks, so the tracking isn't lost. LibreOffice shows
the round-tripped ruby over its base, and the content validates.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Six features of LibreOffice documents were lost on open and save. A
two-page document came back as one page, because the page break after
a paragraph was dropped. Now read and written:
- a page break after a paragraph (`fo:break-after="page"`), as a page
break before the next paragraph, as Word has it;
- lines kept together (`fo:keep-together`);
- widow and orphan control (`fo:widows`/`fo:orphans`): on with any line
count, off with none;
- hyphenation (`fo:hyphenate`): a paragraph's in ODF, the document's in
WordCraft. A document with a hyphenated paragraph hyphenates, and its
other paragraphs opt out;
- a table's alignment and width (`table:align`, `style:rel-width`);
- its rows' heights (`style:row-height` exact, `style:min-row-height` at
least).
Flow model: `FTable::extra` (alignment, width, row heights), filled by
formats that keep them.
A LibreOffice document with all of these round-trips at 573 px
difference instead of 4,407, keeps its two pages, and validates
against the ODF 1.3 schema. No other test document changed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
A turned text box (free rotation) drew its frame turned and its text
upright. Its text now turns with it about the box's centre, as Word
draws it, on screen and in PNG and PDF export: upside down when the
box is flipped across, never mirrored by a side-to-side flip.
PDF export draws item by item, to tag each paragraph, so it turns each
of the box's lines the same way, and tags the turned lines as their
paragraph's text rather than as decoration.
Clicks and the caret inside a turned box still go by its upright text.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Three causes of the largest remaining LibreOffice round-trip
differences:
- In-line frames and shapes centred on or hanging from the baseline
(`style:vertical-pos` `middle`, `bottom`, or `from-top` with
`svg:y`, relative to the baseline) were read as standing on it. They
are now read as their run's lowering, which the layout honours, and
written back as `from-top`.
- Leading: LibreOffice also leaves the leading after a paragraph's last
line. It is now added to the paragraph's space after.
- Text box frames didn't derive from LibreOffice's Frame style, without
which LibreOffice ignores a frame's `fo:border` and outlines it in
its default shape colour. They now do, and an empty Frame style is
declared.
LibreOffice round trips (pixel difference): shapes 13,864 → 1,273,
spacing 2,973 → 706, text box 736 → 0. No other test document changed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
An in-line picture, shape or chart always stood on the baseline,
whatever its run's position. Word moves an in-line picture with its
run's position (`w:position`, Font › Advanced › Position):
- lowered, it reaches below the baseline (at most until its top is on
the baseline) and the line's descent grows to hold it;
- raised, it stands clear of the baseline at its own height.
A drawing's cluster now reaches `obj_h` above the baseline and `obj_d`
below it (negative when raised). It is painted, hit-tested and wrapped
from both.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Tests and notes for rules that #4129, #4113, #4109 and #4101 added and
left uncovered:
- A border line at the top of a story with formatting left out of the
Track Changes markup is not a formatting change, and Reject All keeps
it.
- The author's own earlier formatting change on that paragraph stays the
one change.
- Reject All keeps the table of a "+---+" line.
- A border line that a content control's lock stops Backspace from
deleting stays as it is, and Enter is refused, untracked too.
- With tab indents on, Tab in a table cell moves to the next cell; with
them off, Backspace before an indented paragraph joins it.
- AutoCorrect and the spelling check's web and e-mail addresses after a
narrow no-break space and a figure space.
docs/typing-parity.md describes each, and lists a no-break space typed
after a word, which does not finish the word for AutoCorrect, as a
known gap.
ODT form controls (ODF 1.3 §13: controls in `office:forms`, each
placed in the text by a `draw:control`) were dropped on open, values
and all. They now open as WordCraft content controls, each with its
value, entries and selection; its name becomes the tag and its label
the title:
- text fields and text areas: plain text controls;
- check boxes: check boxes;
- radio buttons: check boxes with round symbols;
- list boxes: drop-down lists;
- combo boxes: combo boxes;
- date fields: date controls.
Saved as DOCX they become Word content controls.
Content controls of those kinds in the body are written back as form
controls with a `draw:control` anchor; in headers and footers they stay
their text. LibreOffice shows the round-tripped controls with their
values, and the content validates against the ODF 1.3 schema.
Not read: buttons, images, hidden and other controls. Controls' sizes
and looks aren't kept.
Flow model: new `Inline::Control`, kept only by flows that ask for
boxes (ODT); other formats get its text.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
A password-protected ODT (ODF 1.3 Part 2 §3.4) failed to open. The
package is now decrypted with the password into a plain one, which the
reader opens as before.
- Supported: AES-256-CBC with a SHA-256 or SHA-1 start key, PBKDF2
with HMAC-SHA-1, and SHA-256 or SHA-1 1K checksums (LibreOffice's
encryption).
- Blowfish (the old default) is refused with a message naming it.
- A missing or wrong password gives the same errors as Word files, so
the app asks for the password.
- Hostile parameters are bounded: iteration count, IV size, ragged
data, inflated size.
Saving with a password (and saving a document opened with one) writes
the ODT encrypted as LibreOffice does. Every file but the `mimetype`
and manifest is deflated and encrypted, each with its own salt and IV,
and the manifest validates against the ODF manifest schema.
LibreOffice opens WordCraft's encrypted files with the password and
refuses a wrong one; WordCraft opens LibreOffice's.
No new dependencies: the AES, SHA, HMAC, miniz and getrandom crates
the workspace already uses for Word encryption.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Review of the objects commit found two gaps.
- The header and footer reader wasn't given the package's entry list,
so embedded objects there were still lost on open. It now shares the
body reader's list and manifest, borrowed rather than copied.
- Headers and footers were flattened for writing without drawings, so
shapes, text boxes, charts and kept objects in them were dropped on
save. They now go out as in the body.
The full LibreOffice round-trip harness shows no change on the other
test documents.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
LibreOffice writes an embedded object's replacement picture in its own
metafile format, which WordCraft can't decode. So an embedded
spreadsheet (`draw:object`, ODF 1.3 §10.4.6) or OLE object
(`draw:object-ole`, §10.4.7) vanished on open, and saving lost it.
Such objects are now kept whole: their files, media type (from the
manifest or the sub-document's body) and replacement picture.
- Display: the replacement picture when WordCraft can show it, else a
placeholder of the object's size drawn in code (ruled for a
spreadsheet).
- ODT save: written back as the same object, with its manifest entries
and original replacement. LibreOffice renders a round-tripped
spreadsheet pixel-identically.
- Document model: the files live in `passthrough` under `odf-object/`,
linked from the picture's `ole` by a marker. The DOCX writer skips
the marker and writes the picture alone.
Flat ODT, a fix to the chart commit: inline sub-documents lacked the
required `office:mimetype`, so the schema rejected flat files holding
charts. Sub-documents now go inline as full `office:document`s (media
type, styles, settings) and are split back into their files on
opening. Replacement pictures and OLE files go inline as base64. A
picture's data is matched to the element that holds it, no longer to
the last `draw:image` before it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Review of the chart commit: the engine drew opened charts only at the
paragraph level, so a chart that was a member of a `draw:g` group
opened blank. The pass now goes into groups (bounded depth).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
A chart object (`draw:object` whose sub-document is an `office:chart`,
ODF 1.3 §10.4.3, Part 3 §11) used to open as its replacement picture.
It is now read into WordCraft's chart model: column, bar (stacked or
not), line, area, pie, doughnut and scatter charts, with categories,
series names and values (gaps included) taken from the chart's own
table through the series' cell range addresses, plus title, legend
position and data labels. The engine draws opened charts in the
document's theme colours, and Chart Design's commands edit them.
Charts WordCraft can't edit as they are (3D, percent-stacked, mixed
plot types, a second value axis, radar and the like) keep their
picture.
WordCraft charts are written as ODF chart objects shaped like
LibreOffice's: a data table, each series and slice in its accent
colour, pies clockwise from the top. They validate against the ODF 1.3
schema, and LibreOffice draws them like WordCraft does. In flat
documents they are written inline as an `office:document`.
Bug fixed: flat ODT reading ended the body at the first nested
`</office:body>`, so an inline sub-document dropped the text after it.
Element lookup now follows nesting, with a bounded depth.
Flow model: new `Inline::Chart`, kept only by flows that ask for
boxes (ODT); other formats still get the alt text.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Remove the feature-only preview workflow from this feature PR. Retain all Rust implementation and regressions unchanged; document direct manual rendering and the exact-source historical previews.
Credit: @totoz64
LibreOffice's leading (`style:line-spacing`, extra space between lines)
has no WordCraft line spacing mode. It was read as a multiple of a
12 pt line, which spreads the extra space differently from LibreOffice,
so the paragraph started too high. It is now read as at least a 12 pt
line and the leading: the extra space goes above each line, as
LibreOffice draws leading (it also leaves some after the last line,
which isn't followed).
A LibreOffice spacing document went from 6,190 px apart after a round
trip to 2,973, and WordCraft's drawing of it from 8,570 to 5,521.
Regression test: `leading_is_at_least_a_line_and_the_leading`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Tracked formatting changes (`text:format-change` regions, ODF 1.3
§5.5.7, between `text:change-start`/`-end` marks) were dropped. The
text between the marks now gets a formatting revision with the change's
author and date. ODF records no old formatting, so the old formatting
is the text's own: the revision shows and can be accepted, and
rejecting it changes nothing (LibreOffice can't reject one after
reopening either). WordCraft's formatting revisions are written as
format changes around their text.
Fixed: changed regions were written with `text:id` only, but ODF 1.3
requires `xml:id` (which the change marks refer to), so any document
with tracked changes failed schema validation. Both are written now,
and a region named by `xml:id` alone is read.
A LibreOffice document with a tracked formatting change round-trips
pixel for pixel; documents with tracked insertions, deletions and
format changes validate.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Drop caps (`style:drop-cap`, ODF 1.3 §17.9) are read into WordCraft's
drop cap (lines and distance; one line is none) and written back as
the paragraph style's `style:drop-cap`. WordCraft drops one letter, so
a drop cap of several letters or a word opens as its first letter.
Fixed: the paragraph style key kept its child elements after a
separator, and the background, borders, contextual spacing and
right-to-left direction were added after the tab stops, so a paragraph
with its own tab stops wrote them into the tab stops' place instead of
onto the paragraph properties, and lost them. Attributes and child
elements are now gathered apart
(`tab_stops_and_other_paragraph_properties_together`).
A LibreOffice document with a drop cap round-trips pixel for pixel.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
`Kmm` with `km/K` suggested `Km`, which the checker flags; `Km` itself got no
suggestion. A suggestion whose dictionary form is only correct through a
KEEPCASE stem now keeps that case (`km`). Other stems are re-cased as before
(`MIXCASX` → `MIXCASE`).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCX8LsYYE8fsj4byBm2
A flat ODT holds the whole document in one `office:document` element
(ODF 1.3 Part 3 §2.1.2), its pictures inline as base64
`office:binary-data` and its formulas inline in their `draw:object`.
It is opened by taking it apart into a package's files (content,
styles, meta, settings; pictures and formulas as entries, each part's
root keeping the document's namespaces) and reading that package, and
saved by putting a package's files together: one set of automatic
styles, every part's namespaces declared once on the root, pictures and
formulas inline without the link attributes.
`.fodt` opens and saves from Open, Save As, the CLI and the web app.
LibreOffice's own flat documents round-trip as their packages do, and
the written files validate against the ODF 1.3 schema.
The parity doc's ODT fidelity is re-estimated at ~80%, and its status
line, which hadn't been updated since the Asian fonts change (a text
replacement that matched nothing), now lists every change since.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
- Page number format: the page layout's `style:num-format`, and a page
number field's own (`PAGE \* Arabic`, `roman`, `ROMAN`,
`alphabetic`, `ALPHABETIC`), both ways.
- Page colour (the first page style's `fo:background-color`).
- Page borders: ODF's sit at the margin with the text inside their
padding; WordCraft measures a page border from the page edge and the
text margin from the edge, so the border's space is ODF's margin and
the margin takes in the border and padding, and back on save.
- Footnote and endnote numbering (`text:notes-configuration`: format,
first number, counted from 0 in ODF, restart, page foot or document
end); only what the document sets is written.
- Line numbering (`text:linenumbering-configuration`, on unless it says
otherwise, ODF 1.3 §19.845: interval, distance, restart on each page).
A LibreOffice document with all of these round-trips pixel for pixel;
WordCraft draws it 7,213 px from LibreOffice (24,025 with the border at
the page edge). The written styles validate against the ODF schema.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Headers and footers were put into the document under the ids their
sections named (1, 2…), assuming the body had made no stories of its
own; but notes, comments and text boxes now are stories made first, so
in a document with a footnote and a footer the footer took the note's
id and the note showed the footer's text (a page number field).
Headers and footers now take free ids and the sections are pointed at
them.
Regression test: `a_footnote_keeps_its_text_beside_a_footer`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Fields that were read as plain text now open as Word's, so Update Field
recomputes them, and are written back as ODF's:
- dates and times in their date or time style (`number:date-style`,
`number:time-style`) ↔ `DATE`/`TIME \@ "picture"`: day, month (by
number or name), year, weekday, hours (12-hour with AM/PM), minutes,
seconds and the text between, both ways; data styles are written as
automatic styles and the `number` namespace declared;
- sequences numbering figures and tables (`text:sequence`) ↔ `SEQ` with
its number format; on save the sequences are declared
(`text:sequence-decls`); on open a bookmark named by the sequence's
reference name covers the caption's label and number ("Figure 1"),
what references to it show;
- chapter fields (`text:chapter`) ↔ `STYLEREF "Heading n"`, by name or
number (`\n`);
- reference marks as bookmarks, and references to them and to sequences
(`text:reference-ref`, `text:sequence-ref`) as `REF`/`PAGEREF`.
Captions renumber, references to them and chapter fields refresh after
Update Field (engine test `odt_fields.rs`). A LibreOffice document with
all of them round-trips 13 px apart with the same text; the written
content and styles validate against the ODF 1.3 schema.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Word's date-time pictures (`DATE \@ "…"`) put literal text in single
quotes, two quotes in a row standing for one: `H' o''clock'` shows
"8 o'clock". The formatter read the quotes as text and the letters
inside as instructions (an `a` became AM or PM). Quoted text is now
shown as it is; an unclosed quote runs to the end.
Regression test: `date_pictures_keep_quoted_text`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
A bookmark over text (`text:bookmark-start`…`text:bookmark-end`, in one
paragraph or across several) was read as a point at its start, and a
Word bookmark over text was written as a point: a reference to it then
updated to nothing. The flow model gets the end of a bookmark
(`Inline::AnchorEnd`, in flows asked for fields, as ODT's is), the
document gets the bookmark's start and end where they are, and the
writer writes a start and an end (a point, `text:bookmark`, when it
ends where it starts). A bookmark started twice, ended twice or ended
before it starts is kept once, as a point when it has no end after it.
References to bookmarks, LibreOffice's references to headings included,
now update to the bookmarked text (engine test `odt_fields.rs`, through
a save and reopen).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Tables of contents, tables of figures (`text:illustration-index`,
`text:table-index`), alphabetical indexes and bibliographies open as
WordCraft's: Word's `TOC` (levels from the source's
`text:outline-level`; `\c` and the caption name for figures), `INDEX`
and `BIBLIOGRAPHY` fields over their entries as last generated. With a
title the field goes in the title paragraph, as References › Table of
Contents inserts one; without, it spans the entries (new flow inlines
`FieldStart`/`FieldEnd`, mirroring the document's range fields). Update
Table then regenerates them from the headings (engine test
`odt_toc.rs`, titled and untitled, through a save and reopen).
LibreOffice's Contents 1–10, Contents Heading and Figure Index 1 styles
are WordCraft's TOC 1–9, TOC Heading and Table of Figures, both ways,
also when a file names them without defining them. WordCraft's tables
are written as ODF indexes with their source and entry templates, so
LibreOffice updates them, the entries' links in the Index Link style.
User and object indexes are read as their paragraphs; index marks are
not read yet.
Found on the way, both shown by the table of contents' round trip:
- a style based on LibreOffice's generic Heading style (as its headings
and index headings are) lost that parent on save, and with it its
font and spacing;
- a paragraph's tab stops were measured from its own indent only, not
from an indent its style gives (LibreOffice's `TabsRelativeToIndent`),
and a named style's stops not from its indent at all.
A LibreOffice document with a table of contents, a table of figures and
an alphabetical index round-trips pixel for pixel (it was 29,717 px
apart and a page short). The parity doc's ODT fidelity is re-estimated
at ~72%.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
A pure move, no behaviour changed: `odt/body.rs` (1,720 lines) and
`odt/writer.rs` (1,716) are split into child modules by topic, the
methods of `Body` and `Writer` moved in `impl` blocks of their own.
- body.rs (930): paragraphs, text, lists, element dispatch;
body/drawing.rs frames, shapes, groups, formula objects;
body/notes.rs notes, comments, fields; body/tracked.rs tracked
changes; body/tables.rs tables.
- writer.rs (618): the writer, paragraphs, inlines, blocks, styles;
writer/props.rs text and paragraph style properties;
writer/drawing.rs pictures, text boxes, shapes, groups, formulas;
writer/tracked.rs tracked changes; writer/notes.rs notes and
comments; writer/tables.rs tables.
Items the rest of `odt` uses are re-exported where they were. Every
harness document (21) exports content.xml, styles.xml and settings.xml
byte for byte as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Polygons and polylines (`draw:points`), paths (`svg:d`) and regular
polygons and stars (`draw:corners`, `draw:concave`, `draw:sharpness`)
open as WordCraft freeforms in their view box (none: the box around
their points) instead of being skipped; circles (`draw:circle`, by size
or by centre and radius) open as ellipses.
The path data reader follows SVG path syntax: moves, lines, horizontal
and vertical lines, cubic and quadratic curves and their smooth forms,
and elliptical arcs (converted from endpoint to centre form), absolute
and relative, with repeated commands; curves are followed in 16 straight
steps, a subpath closed by `Z` is a closed path, and input is bounded
(numbers, points, paths, coordinates).
WordCraft's freeforms (ink included) are written as `draw:path` in a
view box of hundredths of a point (whole numbers, as ODF's view box is).
A LibreOffice document with a polygon, a polyline and a closed Bézier
curve (relative `c` and smooth `s` commands) round-trips 333 px apart,
and WordCraft draws it 529 px from LibreOffice; the written content
validates against the ODF 1.3 schema.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Graphic styles' arrowheads (`draw:marker-start`/`-end`), line dashes
(`draw:stroke-dash`) and gradient fills (`draw:gradient`), defined by
name in the styles, open as WordCraft's arrowheads, dash patterns and
gradients:
- dashes: up to two kinds of dash and one space, in line widths or
absolute lengths, matched to WordCraft's named dashes when equal;
- gradients: linear and axial along their angle (ODF's 0° runs top to
bottom, anticlockwise; WordCraft's left to right, clockwise; an angle
without a unit is tenths of a degree, as ODF 1.2 wrote it), radial,
ellipsoid, square and rectangular out from their centre (end colour in
the middle), with border and intensity.
They are written back as definitions in `styles.xml` (WordCraft's own
triangle arrowhead marker; equal definitions share a name; the header
writer's names are prefixed apart). Frames keep gradient fills too.
A line now keeps the direction it is drawn in (`svg:x1`/`y1` is its
start): one drawn leftwards or upwards is flipped that way, so its
arrowheads stay at their ends, and it is written from its start.
A LibreOffice document with arrowheads, dashes and gradients round-trips
215 px apart; WordCraft draws it 518 px from LibreOffice. Exported
styles.xml and content.xml validate against the ODF 1.3 schema.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
The renderers draw a line from its frame's top left to its bottom right
(DrawingML's `line`; flips turn the frame), but the arrowhead code and
`end_direction` assumed a line from the bottom left to the top right, so
a sloped line's arrowheads were drawn at the other diagonal's corners,
apart from the line. Horizontal and vertical lines hid it. The
arrowheads now start from the line's own ends, pointing along it.
Regression test: `tests::a_lines_arrowheads_sit_at_its_ends`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Groups (`draw:g`) of shapes, text boxes and pictures open as one
WordCraft group instead of being skipped: anchored and wrapped as the
group is, over the box around its members, each member at its place in
it (from its `svg:x`/`svg:y`, its line ends or its `draw:transform`,
turned members turned); groups inside a group are flattened into it.
WordCraft's groups are saved as `draw:g`, members at their offsets with
no anchor of their own, nested groups nested (a canvas as a plain group).
A frame, shape or group whose styles state no `style:wrap` now has text
on both sides, as LibreOffice wraps it (ODF 1.3 §20.400 states no
default), not above and below only; `biggest` is read as the larger
side. A shape whose only paragraph is LibreOffice's empty `<text:p/>`
gets no empty text story.
A LibreOffice document with turned shapes and a group was 7,464 px apart
after a round trip; now 586, with the same text.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Shapes and pictures turned by `draw:transform` (rotate, translate and
scale, applied in turn to the object's own coordinates) open turned: the
file's anticlockwise turn about the object's top left corner, followed by
a move, becomes WordCraft's clockwise turn about the centre of the
unrotated box at its offset, as Word places them. They are written back
the same way, in line as well as floating. LibreOffice writes no
`svg:x`/`svg:y` for a turned shape, so before, a turned shape lost both
its turn and its position.
Custom shapes keep their mirroring (`draw:mirror-horizontal`/`-vertical`
on their geometry), and a turned line is written by its turned ends. The
flow keeps the placement of an in-line object that is turned or mirrored.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Drawing shapes (`draw:rect`, `draw:ellipse`, `draw:line`, and
`draw:custom-shape` of a predefined geometry named by its
`draw:enhanced-geometry` `draw:type`) open as WordCraft shapes instead of
being skipped: size, placement (in line or floating, as frames are),
fill and line from the graphic style chain and the default graphic style
(LibreOffice's solid fill and hairline where nothing is stated), their
text, and a line's direction from its two ends. LibreOffice's type names
and its `ooxml-` preset names map onto WordCraft's kinds; a geometry
WordCraft has no shape for opens as a rectangle.
WordCraft's shapes are saved the same way: a custom shape by its type
alone (LibreOffice rebuilds the geometry from it), a line by its ends,
connectors as lines. A shape is saved with `draw:auto-grow-*` off unless
it resizes to fit its text, so LibreOffice keeps its size.
The flow model's text box becomes `Inline::Shape` with a kind; text
boxes are the `TextBox` kind and are written as frames, as before.
Not yet: shapes in groups, polygons, paths, rotation, arrowheads,
dashes, gradients.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
A text box frame's line (colour and width), fill and padding are read
from its graphic style and that style's parents (LibreOffice's Frame
style included) instead of a fixed thin black line on white, and written
back. ODF's defaults (no line, fill or padding) apply where the styles
say nothing. A frame without a height, or with a `fo:min-height` on its
text box, opens as a box that resizes to fit its text and is saved with
a least height again. A LibreOffice text-box document was 1,117 px apart
after a round trip; now 736.
Layout: a floating text box that resizes to fit its text now takes its
text's height (drawn and wrapped around), as inline ones already did;
before, it kept its stored height (an ODT frame without one showed as a
1 pt line with the text spilling over the paragraph).
A formula sub-document's content.xml stays a bare `math:math` root, as
ODF 1.3 Part 3 §2.2.9 B requires (pinned by a test), and the reader now
skips a wrapping `office:math` some writers add instead of taking it for
the MathML root.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
The Asian and complex-script fonts (`style:font-name-asian`/`-complex`,
through their font-face declarations, or `style:font-family-*`), the
complex script's size, weight and posture, and the Asian and complex
languages (`style:language-*`, `style:country-*`) are read on runs and
from the default style, into the run's and the document's
character properties, and written back. Hebrew, Arabic and CJK text
lost its fonts on a save (an RTL test document: 2,043 px apart in
LibreOffice after a round trip, now 529).
A run's own complex-script weight or posture is written once, not also
copied from its Latin bold or italic.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
`style:writing-mode` `rl-tb` (or `rl`; ODF 1.3 §20.404) on paragraph
properties opens as a bidirectional paragraph, from automatic and custom
paragraph styles alike, and is written back on the paragraph's or the
custom style's properties. Right-to-left paragraphs opened left to right
and left-aligned.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
A `draw:frame` holding a `draw:text-box` (ODF 1.3 §10.4.3) opens as a
WordCraft text box: a text box shape of the frame's size, in line or
floating as the frame is anchored and placed, whose story holds the
box's paragraphs (read as a note's are, with the paragraph and frame
around them put aside meanwhile, so a picture inside the box is a frame
of its own). The text was dropped on open.
Export writes each text box as a frame with a thin border and white fill
(`draw:fill` as well as `fo:background-color`: LibreOffice fills a frame
without `draw:fill` with its default blue). The module documentation now
lists what the reader and writer handle.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
LibreOffice gives a heading style the outline's numbering unless the
style names no list style (`style:list-style-name=""`, as LibreOffice
writes its own). Our heading styles named none, so a heading whose level
the outline doesn't number still took that level's default indent: a
Word-made document's headings sat indented after a save. Heading styles
of unnumbered levels now name no list style; numbered ones stay
attached. Round-trip of that document: 3,302 px apart, now 1,121.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Contextual spacing (`style:contextual-spacing`, ODF 1.3 §20.255: no
space between paragraphs of one style) is read from paragraph, custom
and kind styles and written back, and the List Paragraph style is
written like any other, so bulleted items keep their spacing; they were
written in Standard and spread apart.
LibreOffice switches many layout behaviours by `settings.xml`, and a file
without them is laid out its own way. A file's own `settings.xml` is now
kept through a save; a document from elsewhere gets the switches
LibreOffice uses for Word files, as WordCraft lays text out as Word
does. Tab stops are written from the margin either way. A Word-made
document saved as ODT drew 38,652 px apart from LibreOffice's own ODT of
it; now 3,302, with the same line breaks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
A common text style other than LibreOffice's link, note-mark and
list-label styles (Emphasis, a user's own) opens as a document character
style with its display name, the custom character style it is based on
and its own formatting; the text in it names it, and only what the
spans' automatic styles add is direct formatting. Before, the style was
lost and its formatting copied onto the text. An id a paragraph style
already has gets "Char" added.
Export writes each custom character style the text uses, and those it is
based on, as common text styles; a span's automatic style is based on
its style and holds only the run's direct formatting. LibreOffice keeps
the style when it saves the file. Automatic styles of styles.xml are
never taken for custom styles.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Each list level's indent and hanging (`fo:margin-left` and
`fo:text-indent` of `style:list-level-label-alignment`) and its label's
alignment (`fo:text-align` of `style:list-level-properties`, ODF 1.3
§17.19-17.20) are read into the document's list levels, for lists and
heading numbering, and written back. Every list was written 36 pt a
level with left-aligned numbers, so LibreOffice's right-aligned numbers
and closer bullets moved on a save (lists test document: 658 px apart
in LibreOffice after a round trip, now 8).
The flow label keeps the position in twentieths of a point, its prefix
and suffix now up to 8 bytes ("Chapter " still fits), so list
paragraphs stay as small as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Each paragraph's style chain was searched for its custom style by
building every custom style in it (cloning its tab stops and the rest)
just to see whether there was one. A cheap check now decides; the style
is built once, by the import that adds it to the document. A test opens
20,000 paragraphs on a 15-deep chain of styles with 60 tab stops each.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
A common paragraph style other than Standard, the paragraph kinds' and
the note texts' (LibreOffice's Text body, a user's own style) opens as a
document style with its display name, the style it is based on (a
custom parent, a kind's style or Normal) and its own formatting:
spacing, indents, line spacing, alignment, keep with next, borders,
background, tab stops and text formatting. Its paragraphs stay in it;
only what the automatic styles over it add is direct formatting. Before,
the style was lost and its formatting copied onto every paragraph.
Headers, footers, notes and comments are covered too.
Export writes each custom style the paragraphs use, and the custom
styles they are based on, as common styles named by an XML-safe form of
the style id and shown by the style's name; LibreOffice keeps them when
it saves the file. A custom style may not take a name the writer uses
for its own styles (Standard, Footnote, Endnote, the kinds'), so no
style is written twice.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Each equation is written as an embedded formula object (ODF 1.3
§10.4.3): a frame in line with the text whose `draw:object` points at a
sub-document `Object N/` (declared in the manifest as a formula) whose
content.xml is the equation's MathML, with its linear text as an
annotation. The reader already opens LibreOffice's formula objects, so
equations round-trip. They were written as their linear text.
LibreOffice scales a formula to its frame, so the frame is sized from
the equation's structure (a box per node: fractions, scripts, radicals,
n-ary operators, delimiters, matrices) and centred on the line.
Checked in LibreOffice 24.2 with LibreOffice Math.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Export wrapped a heading numbered through its style in a `text:list`
with WordCraft's default list style, so LibreOffice laid its number out
with that list's indents: level 2's "1.1." sat 54 pt in from the margin
(measured against LibreOffice's own file). A heading numbered only
through its style is now a plain `text:h`, numbered by the outline
style. The outline levels also get label alignment followed by a tab,
and the heading styles no longer state zero indents, which in
LibreOffice override the numbering's placement.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
A frame anchored to a paragraph, character or page (`text:anchor-type`,
ODF 1.3 §19.11) opens as a floating picture: its graphic style's
`style:wrap` and `style:run-through` give the wrap (square on both
sides, left, right or the larger side; top and bottom; behind or in
front of text), `style:horizontal-pos`/`-rel` and `style:vertical-pos`/
`-rel` its alignment or, with `svg:x`/`svg:y`, its offset and what it is
relative to, and `fo:margin-*` its distance from the text. Every
picture used to open in line with the text.
Export writes floating pictures anchored the same way, placed by a
graphic style of their own; pictures in line stay `as-char`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Paragraph borders (`fo:border*`, ODF 1.3 §20.183; each side's
`fo:padding*` as its distance from the text) and background
(`fo:background-color`, `transparent` as none) are read from paragraph
styles, the nearest in the chain but the kind's style and Standard, and
written back on the paragraph's style. Only an empty paragraph with a
bottom border was kept before, as a horizontal rule.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
`text:outline-style` (ODF 1.3 §16.34) numbers the headings of its
levels. On open its levels (format, prefix, suffix, levels shown, start)
become one list, each level linked to its heading style, and Heading
1-6 number their paragraphs through it, as Word's numbered headings do:
LibreOffice's "1. / 1.1." headings keep their numbers (they were lost).
Levels without a number stay unnumbered.
Export writes a `text:outline-style` from the numbering of the heading
styles; levels without one show no number.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
A `style:font-name` names a `style:font-face` in office:font-face-decls
(ODF 1.3 §16.23, §20.194); the font is that face's `svg:font-family`.
The reader took the face's name for the font, so LibreOffice's
`FreeSans1` opened as an unknown font "FreeSans1" instead of FreeSans.
Faces declared in content.xml and styles.xml both count; a name with no
face is still taken as the font.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Cell borders (`fo:border*`: width, style, colour; ODF 1.3 §20.183) and
padding (`fo:padding*`) are read from table-cell styles. LibreOffice
gives an edge two cells share to one of them only (the left cell's
right side `none`, the right cell's left side drawing it); on open the
line goes to both cells, as WordCraft's cells each draw their own sides.
A table whose cells all say "no line" opens without a grid.
Export writes each cell's padding (its own, its table's or Word's
default) and its borders with each shared edge once, as LibreOffice
does (left and bottom, the first row's top, the last column's right), so
lines no longer double; cells used a fixed 4 pt padding and a grid even
in tables without lines.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
On open, the file's own Heading 1-6, Title, Quotations and Preformatted
Text styles (named or displayed so, their whole chain but Standard)
give WordCraft's matching styles their font, size, bold, italic,
colour, spacing, indents, alignment and keep with next: a LibreOffice
heading is bold Liberation Sans, no longer WordCraft's blue heading.
`fo:font-size` percentages are read as a share of the inherited size.
On save, those styles are written from the document's own definitions
in full, instead of fixed ones, so a WordCraft heading looks the same in
LibreOffice. The styles test document now round-trips pixel-identically.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Tab stops (`style:tab-stops`, ODF 1.3 §17.7-17.8) open with their
alignment (left, centre, right, decimal) and leader (dot, hyphen,
underline, middle dot), and are written back on the paragraph's style;
the default tab interval (`style:tab-stop-distance`) round-trips.
LibreOffice measures tabs from the paragraph's indent when its
`TabsRelativeToIndent` setting is on (its default); opening follows the
setting, and saved files carry a settings.xml that turns it off, so
positions run from the margin as in Word and WordCraft.
The flow model carries the tabs in `Para::extra` only for flows that
ask (FlowOpts::paras).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
`style:text-properties` beyond bold, italic and colour now open and
save: underline styles (double, thick, dotted, dashes, wave, words only)
and colour, double strike, caps, small caps, hidden text (kept, hidden),
letter spacing, scale, text raised or lowered at full size (a position,
not superscript), outline, shadow, emboss, engrave and language.
A monospaced font keeps its own name; it was read as "code" and written
as Courier New. The default style's pair kerning (`style:letter-kerning`)
is read into the document defaults and written back, so lines break
where LibreOffice breaks them (round-trip renders of the test documents
are now pixel-identical in LibreOffice).
The flow model carries this in `Fmt::extra` only for flows that ask
(FlowOpts::chars); the other formats are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Each level of a list style (ODF 1.3 §16.30-16.33) is read with its
number format (1, i, I, a, A, none), prefix and suffix, levels shown,
start value and bullet character, and written back. Each `text:list` is
a list of its own unless it continues the one before it
(`text:continue-numbering`) or the one it names (`text:continue-list`);
an item's `text:start-value` restarts from there. A list inside a note
or table cell leaves the list around it alone.
Before, consecutive lists merged into one: three LibreOffice lists
numbered 1., i. and A. opened as one decimal list 1-7.
The flow model's ListInfo carries a list number and a compact label
(prefix and suffix up to 12 bytes, so "Chapter %1" fits) only for flows
that ask for them (FlowOpts::lists); the other formats are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Export wrote only the direct replies of a comment, so a reply to a reply
was lost on save. Every reply in a comment's thread is written now, each
answering the comment that starts the thread, as LibreOffice's threads
are flat. A reply chain that loops (hostile) is written once.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
`office:annotation` (ODF 1.3 §14.1) opens as a document comment with its
author, date, initials and text; `office:name` and
`office:annotation-end` (§14.2) give its range, across paragraphs too.
LibreOffice's resolved state (`loext:resolved`) and reply threads
(`loext:parent-name`) are kept: a reply is a comment of its parent with
no range of its own. An end with no comment is dropped, and a comment
whose end never comes covers nothing. LibreOffice's all-zero date is no
date. Before, comments were dropped on open.
Export writes each comment named, with its end where its range ends,
and its replies after it naming it; LibreOffice keeps the threads when
it saves the file again. Truncated XML no longer loses the paragraph a
note or comment sits in.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
`text:note` (ODF 1.3 §6.3) opens as a note story built as Word's: its
paragraphs in Footnote Text or Endnote Text, the first starting with the
note's own mark, the reference in the text in the reference style, and a
`text:label` custom mark kept. The paragraph a note sits in (with its
spans, list and table cell) is put aside while the note's content is
read, and goes on after it. Notes inside notes, in deleted text or in
frames are left out. Before, notes were dropped on open.
Export writes each note with a citation numbered as LibreOffice shows
it (footnotes 1, 2, 3; endnotes i, ii, iii) or its custom mark, its
paragraphs in Footnote or Endnote styles defined in styles.xml. An
insertion open around a note ends before it and goes on after it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
A LibreOffice header 2 cm high with 1 cm spacing puts the text 2 cm below
the page margin: `fo:min-height` takes in the `fo:margin-bottom` spacing.
Import added the spacing on top, so the text started a spacing too low
(measured: 113.9 pt in LibreOffice, 142.3 pt after a WordCraft save). The
spacing now counts only past the height.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Export writes each section's headers and footers into its master page
(style:header, -left for even pages, -first for a different first page;
an empty element where Word shows nothing), with their automatic styles
in styles.xml under names of their own. Word's page-edge header and
footer distances become ODF's page margin plus header/footer band
height, and import converts back, so headers sit where LibreOffice
draws them.
Text fields (ODF 1.3 §7: page number and count, date, time, document
information, bookmark references) open as WordCraft fields with their
shown text as the result, and are written back as ODF fields. Fixed
dates and fields without a Word equivalent stay text; Word fields ODF
lacks are written as their result. The flow model carries fields only
when asked (FlowOpts), so the other formats are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Read `fo:margin-*`, `fo:text-indent`, `fo:line-height` (percent, length,
normal), `style:line-height-at-least` and `style:line-spacing` (leading,
as a proportional approximation) from automatic and common paragraph
styles (ODF 1.3 §20.204-209, §20.225, §20.317-318), and write them back
from each paragraph's direct formatting.
The default paragraph style and Standard give the document defaults, on
ODF's initial values: an ODT paragraph without spacing has none, not
Word's 8 pt after and 1.15 lines. Export writes the document's Normal
spacing as the default paragraph style, so the copy reopens the same.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
A pStyle id the style sheet doesn't define gave an empty style chain, so the
paragraph got the document defaults alone. Word formats it as Normal: a Pandoc
footer naming an undefined Footer style was taller than Word's and pushed the
last paragraph of the page over.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
A hyperlinked TOC wrote each entry's page number as plain text inside the
link. Word writes it as a PAGEREF _Toc… \h field, so Update Field in Word
moves the number with its heading; with plain text the numbers stay what
they were when the file was saved.
Entries that link to a bookmark now end with that field (result: the page
number). Entries without a link and \n levels are unchanged. The DOCX span
test looks for the TOC's own end, the last one, since PAGEREF fields now end
inside it.
Co-authored-by: dfgodvan <180286157+dfgodvan@users.noreply.github.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Found while testing crates/engine/src/cmd/mailings/recipients.rs:6-18 (csv_separator)
Co-authored-by: Claude Haiku 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Treat <!--> and <!---> as empty comments in HTML import
Found while testing crates/formats/src/html/lexer.rs:70-73 (Lexer::next, `<!--` branch)
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Docs: file-format-parity HTML row for empty comments (#5040)
---------
Co-authored-by: Claude Haiku 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Keep with next asked for two lines of the paragraph after a kept heading under widow/orphan
control. A three-line paragraph cannot split at all there (two lines and a widow, or an orphan
and two), so it moved over whole and left the heading alone at the foot of the page. Word moves
the heading with it: ask for all three lines in that case.
Co-authored-by: dfgodvan <180286157+dfgodvan@users.noreply.github.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Keytips: Alt, F shows the Backstage pages' letters; Alt, F, P and Alt, F, V print (#4960)
Keytips ended as soon as File opened the Backstage, so Alt, F, P and
Word's older Alt, F, V (Print Preview) did nothing. Alt, F now badges the
side menu with Word's letters (Home H, New N, Open O, Info I, Save S,
Save As A, Print P, Export E, Close C, Options T), and V opens the Print
page too, as it does in Word. A page picked this way acts as a click on
it does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Keytips: closing the Backstage ends its page letters (#4960)
The Backstage closed by its back chevron or a mouse Save while Alt, F's
badges showed left keytips waiting for a page letter. The next key was
eaten instead of typed, and picked a page with the Backstage gone: C
closed the document and S saved it. Keytips now end with the Backstage.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Keytips: keep the doc comment on works_without_document; ui-parity and ROADMAP rows (#4960)
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* #4734: the print job's PDF leaves out link annotations
craft-print refuses to fit a page with annotations to the paper ("flatten page annotations
before using shrink-to-fit"), and the desktop app always prints with ShrinkToFit, so any
document with a hyperlink or a TOC (its entries are links) failed to print. Links print
nothing; `PdfOptions::links` (default on) lets the print job leave them out. Exported PDFs
keep them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #4734: review — the print note is in every desktop column; gaps and progress log
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #4734: doc wording: the print PDF omits link annotations; hardware still to validate
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #4734: only the printer's PDF drops links; Save these pages as PDF keeps them
Session::print_job_pdf is what ui.printSubmit sends to the spooler, without
link annotations; Session::print_pdf (file.printPdf) keeps them again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
count_words split only on whitespace, so unspaced Chinese or Japanese
text counted as one word per run. Word counts each Han ideograph and
kana as a word; Hangul (spaced) still counts by tokens. Fixes the status
bar, the Word Count dialog and NUMWORDS, which all use count_words.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* View › Macros opens a dialog to run, delete and record macros (#4327)
* Docs: date the Macros dialog row and bump the ui-parity status line (#4327)
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* fix(engine): saturate page parameters on 32-bit and wasm (#3676)
The file.exportPng and edit.goto paths cast a u64 page to usize and subtracted one. On 32-bit and wasm, page 2^32 truncated to 0 and the subtraction wrapped to page 1 (a debug panic).
Add p::page_index, which saturates instead of wrapping, and use it in both engine paths. The MCP render path already has the same guard on main; the new tests also pin that behavior.
Regression tests cover the helper, Go To, PNG export and the MCP render path.
* fix(engine): guard caret.set page cast too (#3676)
caret.set takes a 0-based page; pg as usize truncated on 32-bit and wasm and could select page 0. Use the same checked conversion and add a regression test.
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
OpenSSF Scorecard (v5.6.0, 4.0/10) flagged:
- Token-Permissions: release.yml granted contents: write at the top level.
Now read at the top, write on the release job only (same effective access).
- Security-Policy: no SECURITY.md. Added one pointing to GitHub private
vulnerability reporting (already enabled on the repo).
- Vulnerabilities: ctutils 0.4.3 -> 0.4.7 (RUSTSEC-2026-0385); clipboard-win
5.4.1 -> 5.4.3 (yanked).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
UPDATE_APP (native builds; craft-update is a native-only dependency) carries our 128 px icon and accent (#3f5fe0, its colour in ArtCraft Launcher). The updater, the self-update
helper and craft-update's startup prompt all get them through crate::UPDATE_APP; the
prompt draws the icon, the accent and "by ArtCraft" (craft-update's default developer).
craft-update is pinned to storytold/craft-libs main at 1065653e7 (#434).
* #4764: copy selected objects along an axis with Ctrl+Shift
* #4775: preserve aligned copies through scrolling and secondary selection
* docs: keep the gaps.md note in the status line and revision table
* docs: drop a stray blank line
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* #3631: index laid-out objects during connector rerouting
* docs: keep the gaps.md note in the status line and revision table
* docs: drop a stray blank line
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Chart and diagram text was shaped in one face, the document's body font,
so Chinese legends and axis labels showed boxes while body text was fine.
Characters the face lacks now go to a fallback face, one face per run
when one covers it all, as in body text; a bold fallback face without a
bold style is emboldened.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* #4848: corporate authors in bibliographies
A Word source whose author is an organisation (Create Source › Corporate Author)
stores it as `b:Corporate`, which the reader ignored: the source opened with no
author, citations fell back to the title and bibliography entries started with
the year. A bare name typed into Author was split into "Organization, W. H.".
- Source gains `corporate`, read from and written as `b:Corporate` (in place of a
name list: a role holds one or the other, ECMA-376 CT_NameOrCorporateType).
- Citations and bibliography entries write it as it is in every style; it gives
the source's tag and its place in an author-sorted list, and untagged sources
are matched by it.
- APA puts its full stop after a group author ("World Health Organization.
(2021).") instead of relying on the initials for it.
- Create Source has a Corporate Author box under Author; Edit Source opens with
it checked when the source has one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LvG6DxS4tKmWSLCiDPvb4G
* Match untagged sources by corporate author before personal author
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* M12: preserve custom-property bookmark links (#4767)
* M12: preserve bookmark links across property renames (#4767)
* M12: align custom-property preservation status dates (#4767)
* docs: keep the gaps.md note in the status line and revision table
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Row, column and cell settings applied to the caret's row, column and cell only, so
selecting the whole table and unticking "Allow row to break across pages" changed
one row and the others still split across pages.
- table.properties applies row height and rule, allow break and header row to every
selected row, the column width to every selected column, and the cell width and
vertical alignment to every selected cell (the caret's with nothing selected), in
one undo step.
- The dialog shows "Allow row to break" and "Repeat as header row" as mixed when the
selected rows differ; left alone they change nothing, clicked they set every row.
- The row-height rule box is named by "Specify height" for screen readers.
Claude-Session: https://claude.ai/code/session_01LvG6DxS4tKmWSLCiDPvb4G
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* M2 #4903: step each selected run from its own font size
* docs: keep the gaps.md note in the status line and revision table
* docs: drop a stray blank line
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* #4411: captions in a style based on Caption are cross-reference targets
Cross-reference and Table of Figures found captions only by the exact
Caption style, so a caption restyled with a style based on Caption (a
label's own "Caption Table") was left out: of five tableX captions,
only the two still in Caption were offered. A caption is now a
paragraph whose style is Caption or based on it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #4411: test captions two styles from Caption and the Table type
Covers a style based on a style based on Caption, a Table caption in
such a style offered under the built-in Table type, and a caption
label used only in a style not based on Caption staying out of the
cross-reference types.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* #4086: highlighting at a caret leaves the word alone
* #4086: the highlight toggle reads pending caret formatting; word formatting updates it
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Backspace after a floating shape's anchor joins paragraphs and keeps the shape (#4592)
* wc-upkeep-6: protect Backspace joins and markers
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* 4757: keep Arabic base letters when removing marks
* docs: keep the gaps.md note in the status line and revision table
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Fix#4750: walk note references and formatting runs together
* docs: keep the gaps.md note in the status line and revision table
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* #3674: PDF export writes a glyph id above 65535 as .notdef instead of failing
Shaping gives 32-bit glyph ids (a format-12 cmap can map a character to
any of them), and the PDF exporter passed them to krilla unchecked.
krilla's CID font takes 16-bit ids and unwraps the conversion
(vendor/krilla/src/text/cid.rs:161 at craft-libs b926b5c0), so one such
glyph failed the whole export natively and aborted the tab on wasm.
The three places that build a KrillaGlyph (body text, metafile text and
the text watermark) now go through glyph_id(), which writes an id that
doesn't fit as glyph 0. The glyph keeps its place and its text range, so
the rest of the run is unchanged.
Regression test: glyph_id_above_u16_exports lays out a paragraph, sets
one glyph's id to 70000 and exports the layout. It failed before with
"PDF export failed internally: ... TryFromIntError(PosOverflow)".
* #3674: the replaced glyph keeps its place, not its text
krilla writes no ToUnicode entry for glyph 0, so a glyph written as
.notdef doesn't extract: "Wide glyph" with the W's id set to 70000
extracts as "\u{FFFD}ide glyph". The rest of the run extracts as
before. The comment on glyph_id() said the glyph kept its text.
* Adapt glyph_id imports to main's exporter text module
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* #4696: built-in heading styles have their outline level without w:outlineLvl
Some producers write "heading 1"…"heading 9" in styles.xml without w:outlineLvl. Word
gives those built-in styles their outline level anyway (checked: Word for Windows reports
OutlineLevel 1 and 2, whatever the style id), so their headings show in the Navigation
pane. WordCraft read no level, and the Headings tab stayed empty.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #4696: review — w:customStyle="on" marks a custom style too
A custom style named "heading 4" with customStyle="on" (ST_OnOff) was taken for Word's
built-in heading and got an outline level.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* #4548: comment ranges inside footnotes and endnotes are kept on read
read_opened read footnotes.xml and endnotes.xml before comments.xml, so
a comment range inside a note looked its id up in an empty comment map
and was dropped. Comments are now read first. read_comments uses nothing
the notes set up.
Regression test: tests/it/note_comments.rs (synthetic markup).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* docs: file-format-parity row for comment ranges in notes (#4548)
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
The RTF reader only recognised \pngblip and \jpegblip, so a \pict
holding \wmetafile8 (how Word writes pasted and floating pictures) or
\emfblip was dropped and the document opened without its pictures.
Keep them as wmf/emf media when the bytes are a metafile (the extension
comes from the bytes; raster bytes go through the usual image path,
anything else is dropped), sized from \picwgoal/\pichgoal and the scale,
else from \picw/\pich (0.01 mm, or pixels under \wmetafile1; zero or
negative falls back to the default). The metafile renderer already
draws them and the DOCX writer saves them as .wmf/.emf.
RTF export dropped WMF/EMF pictures as well (it re-encoded every other
format through the raster decoder): it now writes \emfblip with the raw
bytes and \wmetafile8 without the placeable header, \picw/\pich in
0.01 mm.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Found while testing crates/formats/src/markdown/export.rs:167-182 (inlines_md_impl, emphasis marker emission)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* M1 #4658: bound Markdown reference-label work
* #4658: align Markdown progress status dates
* docs: keep ROADMAP's second status line as on main
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Formats: preserve HTML input newlines (#4810)
* docs: fold the #4810 notes into the existing status lines
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Found while testing crates/formats/src/latex/export.rs:402-444 (escape_text, `prev` resets per call) and :230-237 (inlines, runs concatenated)
Co-authored-by: Claude Haiku 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Found while testing crates/formats/src/html/builder.rs:338-344 (Builder::text)
Co-authored-by: Claude Haiku 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* fix(formats): saturate HTML <font size> offsets so extreme values cannot overflow
* test(formats): assert the saturated HTML font sizes, not only that the text survives
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Found while testing crates/formats/src/model/color.rs:45-47 (parse_color, 8-digit hex branch)
Co-authored-by: Claude Haiku 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Found while testing crates/formats/src/sheet/date.rs:136-152 (iso_time, PT duration branch)
Co-authored-by: Claude Haiku 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
The Linux same-user check read the uid of the listener's side of the
connection from /proc/net/tcp. Until the listener accepts it, that row has
no socket file (inode 0) and reads uid 0 whoever listens, so a Zotero that
hadn't accepted yet was refused as "another user (uid 0)". The ui-egui
Zotero tests failed about one run in three on a busy machine because of it.
Rows without a socket file (unaccepted connections, TIME_WAIT) are now
skipped, and the listening row on the listener's address stands in for the
connection's own; two users listening there is refused.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Ctrl+V pastes a clipboard picture again with egui 0.37
Since the egui 0.37 migration, egui-winit keeps both the Mod+V press and
its release, so the canvas never sees the V release it pasted a clipboard
picture on. Outside Wayland, egui-winit instead sends Event::PasteImage
when the clipboard holds a picture and no text, which the canvas ignored.
Ctrl+V pasted nothing while the ribbon and context-menu Paste still worked.
Answer PasteImage with edit.paste, which reads the picture through the host
like the ribbon's Paste. The web build sends no PasteImage, so nothing
pastes twice there.
Part of #4782
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Mark the clipboard picture as pasted on PasteImage so a later V release cannot paste twice
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
File › Options › Proofing › AutoCorrect Options did nothing on the Start
screen: tools.autocorrect wasn't in works_without_document, so the click
was dropped. Its options are user preferences (session.prefs), like the
other File › Options settings, so it now works without a document.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Shading buttons show the last picked colour as their bar (#4412)
The paragraph and table Shading buttons always drew the icon's yellow bar,
whatever colour a click applied. They now draw the remembered colour as the
bar, as Font Color and Text Highlight Color do (#4087), on an icon without a
bar of its own.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* docs: ui-parity row for the Shading button colour (#4412)
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
With the painter armed, only dragging across the text applied the copied
formatting: a double-click (a word) or triple-click (a paragraph) selected
the text and returned before the painter was used. Both paths now go through
one helper, so the click paints what it selected and the painter goes off.
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Options: a blank User Name stays blank after a restart (#4368)
* docs: ui-parity row for the blank User Name (#4368)
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Inserting WordArt selects its placeholder text, so typing should replace it. From the Insert
gallery the first keystrokes went nowhere: the gallery's cells (and the Text Fill, Text Outline,
Glow and Transform galleries beside them) ran their command with `app.run` instead of
`run_from_ribbon`, so the canvas never asked for focus back and the page ignored the keys.
They now go through `run_from_ribbon` like every menu item.
Regression test renders the style gallery, picks a style and checks the page asks for the
keyboard; it fails without the change.
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Adds the key that Apache POI's Excel-written test file
protected_passtika.xlsx (password "tika") derives, computed from
[MS-OFFCRYPTO] §2.3.4.7 independently of the implementation, so real
Word 2007 files stay pinned.
Also adds the contributor's people.toml entry.
Co-authored-by: Bra1nZ <bra1nz@astraoffice.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Layout parity: field results take \* DollarText, \* Hex and \* ArabicDash
docs/layout-parity.md gets a row for the three field switches that #4226
added, a revision entry and a new status-line clause. The row describes
main as it is after 8c035fbb, where \* ArabicDash formats any number
field and table formulas, not PAGE alone.
* Layout parity: dollar text keeps its digits only past 999,999.99
Cardinal and ordinal text keep their digits past 999,999. `\* DollarText` writes
results up to 999,999.99 (crates/layout/src/fields.rs dollar_text).
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* M14: validate window fallback geometry and avoid duplicate symbol names
Verified regression cases and full cargo xtask ci before publication.
* M14: document review helpers and regression contracts
Documentation-only follow-up; full cargo xtask ci passed.
---------
Co-authored-by: kalmarr <680152+kalmarr@users.noreply.github.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
AGENTS.md (and CLAUDE.md where present) gets a CI workflows section: workflows only call
craft-common-actions at @main, with no other jobs; feature and fix PRs don't touch CI and
link or open a craft-common-actions issue (a PR only for a small fix that is safe for
every app and does not increase CI time); legacy jobs
aren't added to and move only as their own task, staying until a shared workflow runs them.
windows-arm64.yml moves from its SHA pin to @main. The pinned revision is on
craft-common-actions main and the workflow (and the actions it calls) is identical
there, so nothing changes in behaviour.
Ported onto current main (title_stem now lives in app/frame.rs; the window
title is built in windows.rs).
Co-authored-by: Lucenx9 <185146821+Lucenx9@users.noreply.github.com>
Count table opens in a single linear pass instead of rescanning
earlier events for every lone table-open marker (O(events) instead of
O(lone * events)).
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* i18n: Traditional Chinese interface draws hanzi with an installed TC font
The zh-hant interface shared the Simplified Chinese font order, so its first
CJK face was the embedded Noto Sans CJK SC and traditional characters were
drawn with mainland glyph shapes (說, 資, 這, 為, 戶).
On the desktop, a Traditional Chinese interface now puts an installed
Traditional Chinese font before every CJK face: PingFang TC on macOS,
Microsoft JhengHei on Windows, Noto Sans CJK TC on Linux. Noto Sans CJK SC
stays after it as the fallback. Without an installed TC font, and on wasm,
the order is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Credits: add TobyWu666 to contributors/people.toml
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* i18n: find Traditional Chinese fonts at the root of a font folder
Linux user font folders (~/.fonts, ~/.local/share/fonts) often hold font
files directly; the Traditional Chinese candidates only named files in
distribution subfolders, so those fonts were missed (CodeRabbit review).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* i18n: skip the Traditional Chinese font test without embedded catalogs
Since the catalogs come from craft-i18n (#4072), a build without
CRAFT_I18N_DIR is English only, so the test now skips like the other
catalog tests. Also rustfmt hant_font_chars.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* #1103: ignore macOS launch arguments and name the real cause when a file won't open
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* #1103: filter launch args on macOS only; leave Backstage after a failed Finder open
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* #1103: leave Backstage after a failed drag-and-drop open
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* #1103: name the file when an open fails after the Save changes prompt
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* #1103: report failed opens from every deferred path in execute_user
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* #1103: keep the named failed-open message after a browser save
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* #1103: only opens held back by a prompt or save leave Backstage on failure
A direct open from Recent keeps File open and reports there (#2938).
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* #1103: re-apply open-failure reporting on main's split ui-egui modules
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Qualify i18n paths in report_open_failure after merging main
---------
Co-authored-by: Dmitrii Khlapov <19991457+dkhlapov@users.noreply.github.com>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* #1744: WIP
* #1744: Select Table copies and cuts the whole table
Copy of a whole-table selection used to keep only the cells' paragraphs
(copy_blocks flattened a cross-cell range), and Cut only cleared the text.
Now Copy puts the table on the clipboard and Cut removes the table.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #1744: selected table rows and cells copy as a table; Cut clears their text
Copy of whole rows, cells of a row or a block of cells puts a table of just
those cells on the clipboard (Table::slice). Cut of rows or cells clears their
text and keeps the rows and cells, as in Word (Word check A).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #1744: review fixes
Table::slice widens every row to a merged cell partly selected (no ragged
copy); an empty selected table or cell copies and cuts; a text selection over
exactly a nested table copies it; one selected_table per Cut; tests for
slice merges/widths/controls, tracked and locked cuts, and the text route.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #1744: Cut clears every cell Copy takes; Spike stays off for empty cell selections
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* #1744: a copied part of a percentage-width table keeps a point width
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* ROADMAP: tidy merged header
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* ROADMAP: keep only the #1744 rows over main's version
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* ROADMAP: remove conflict markers; keep only the #1744 rows over main's version
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* #1744: rename the range Cut helper clear_range_cells (main added clear_cells)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Remove conflict markers from ROADMAP.md; leave main's header line alone
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* cargo fmt
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Import Path in table structure after merging main
---------
Co-authored-by: Dmitrii Khlapov <19991457+dkhlapov@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Tables: share span minima by preferred widths (#1883)
* 1222: Match nested preferred span weights
* docs: word the #1883 layout-parity entries
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* packaging: Flatpak finds and prints to CUPS printers
The Print dialog listed no printers in the Flatpak: the runtime has libcups but not
lpstat/lp, the sandbox couldn't reach the CUPS socket, and driverless network printers
(lpstat -e) need Avahi. Bundle lpstat/lp/lpoptions from CUPS 2.4.20 (Apache-2.0,
statically linked, licence installed) and grant --socket=cups and
--system-talk-name=org.freedesktop.Avahi in both manifests.
* packaging: Flatpak reads the user's CUPS settings (~/.cups, read-only)
Review (CodeRabbit): without it the sandbox's lp/lpstat ignore the user's default
printer and saved options (lpoptions) and a print server named in their client.conf.
* packaging: Flatpak CUPS tools reach the host socket when client.conf names a custom path
Review: Flatpak mounts the host's CUPS socket at /var/run/cups/cups.sock whatever
path ~/.cups/client.conf or CUPS_SERVER names, so lp/lpstat/lpoptions now run through
a wrapper that points a socket path missing in the sandbox there. Server names
(remote servers) and sockets that exist are left alone. Tested in the sandbox:
CUPS_SERVER=/run/custom/cups.sock lists the host's printers through the wrapper and
none without it; a host name is passed through unchanged.
* packaging: redirect a custom CUPS socket only when it is the one Flatpak mounted
Review (CodeRabbit): Flatpak picks the socket it mounts at /var/run/cups/cups.sock
with stricter rules than CUPS (flatpak-run-cups.c: a socket CUPS_SERVER, else the
first line spelled exactly "ServerName /path" in ~/.cups/client.conf, else the
default), while CUPS reads the keyword in any case and takes the last ServerName. The
wrapper now redirects only when CUPS' socket is the one Flatpak chose, so a job can't
reach a different server; otherwise CUPS fails on the missing path.
* packaging: never redirect a CUPS_SERVER the sandbox was given
Review (CodeRabbit): Flatpak picks the socket it mounts from the host's CUPS_SERVER,
so one set by flatpak run --env or an override may not be what it mounted. The
wrapper now leaves any CUPS_SERVER alone and redirects only a client.conf socket that
matches Flatpak's choice; otherwise CUPS fails on the missing path instead of
reaching a different server.
* packaging: point CUPS at the mounted socket only when it is the one Flatpak chose, else fail
Review (CodeRabbit): with a custom socket listed first and the default last in
~/.cups/client.conf, Flatpak mounts the custom one at /var/run/cups/cups.sock while
CUPS picks the last line, finds that path, and talks to the custom server. The
wrapper now compares CUPS' socket with Flatpak's choice even when the path exists:
equal, CUPS is pointed at the mount; different, the tool fails with an error instead
of reaching another server.
The shared dictionary slot reports no file while a dictionary given
with install_dictionary is in use, so this test had accepted null
alongside the folder's file, for installs from tests running at the
same time. That also let it pass if file.options stopped reporting the
folder's file at all. The tests' install helpers and this test now take
turns on one lock, and each language must report the folder's file
again. An install from before the test doesn't matter: changing the
folder reloads every slot.
main split Czech's suggest_in into one helper per round for the
cognitive_complexity limit (#4501). On this branch that code is the
shared affix_suggest::suggest_in (36 of 30), so cs/suggest.rs stays the
thin wrapper and the shared function gets the same split. The candidates
are offered in the same order; a dump of 13,081 calls over every
language's test dictionary matches the old engine except one: the typo
round counts the lower-cased letters, so "İ" (two letters lower case)
now gets "I" in Polish, where the old count stopped one letter short.
Add packaging/freebsd/package.sh, matching the sibling craft apps. The release
workflow cross-compiles aarch64 FreeBSD in an x86_64 VM with CARGO_BUILD_TARGET
set; the script builds with --target, reads binaries from the target directory,
names the archive after the target arch, and checks ELF/FreeBSD/arch instead of
running binaries that cannot run on the host.
The pre-signing check matched any folder named Program Files, so it rejected
a valid MSI when Windows resolves Program Files elsewhere, accepted the 64-bit
root for an x86 package and accepted a different app name. Build the expected
folder from the package architecture's resolved root and the policy name.
Each shaping call let harfrust compile a new shape plan (the face's
lookups for the run's script, direction, language and features), which
took about as long as shaping a short run. Each thread now keeps up to 64
plans (the oldest dropped to make room), found by face and harfrust's
ShapePlanKey::matches, and passes the plan to the shaper. A kept plan is
only used for the face it was made for: the face id (from one process-wide
counter, so no two faces share it) together with the font bytes' address,
length and face index. The plan is the one the shaper would have made for
the buffer, so the glyphs are the same; tests shape with kept and fresh
plans and compare, and check the per-thread bound.
PDF export of the export_bench document (259 pages), interleaved with main
(A/A within 1 %): median 421 ms -> 319 ms (-24.2 %), measured on a loaded
machine; on a quieter run earlier 294 ms -> 224 ms (-23.8 %). PNG export of
page 1 (which lays out the whole document): about -34 %. The PDF and PNG
bytes are identical to main's.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Set persist-credentials: false for preview tests and join the two newly added documentation blockquotes as requested by review. No Rust source change.
Validation: independently reviewed exact workflow and Markdown diffs and tree hashes. Cargo fmt passed on the unchanged Rust source; cargo xtask ci was attempted but blocked by missing local dlltool.exe. Fresh hosted checks are required for this revision.
Merge main 436d444ef0. Port proofing selection/navigation and app/control/pane hooks to extracted modules, retain per-window state and stale-target guards, preserve upstream menus, and extend preview path filters. Keep the original pane implementation and targeted tests, with explicit imports after test relocation.
Workspace formatting passes. Local cargo xtask ci is blocked during Clippy by missing dlltool.exe in the Windows GNU toolchain; no local test success is claimed. Hosted navigation, UI, rendering and full checks on this tree remain required.
Real msiexec runs (per-user and all-users, silent and wizard) found two defects
that the metadata fixtures cannot see:
- "Only for me" published ALLUSERS=2, so FindRelatedProducts treated the run as
per-machine and skipped the existing per-user copy. An interactive upgrade
left two registered products and uninstall left files behind. The page now
leaves ALLUSERS unset for a per-user choice.
- Windows Installer resolves Program Files once, for the context it started in,
so choosing "Everyone" in the wizard installed into the user profile with a
machine-wide registration. The wizard now sets the new-install folder itself
after the choice (Program Files, Program Files (x86) for 32-bit, or the
per-user Programs folder). Silent installs are unchanged.
check-install-policy.ps1 now fails if either regresses.
Shortcuts that give the same answers as the lookups they skip:
- is_rtl: nothing before U+0590 is right to left, so Latin, Greek and
Cyrillic text skips the bidi class search.
- strong_rtl and is_mark: ASCII letters are the only strong ASCII
characters, and no ASCII character is a mark.
- cluster_starts: in ASCII text every character starts a grapheme except LF
after CR, and no ASCII character joins a cluster.
- display lines: a glyph run's vectors and text are sized up front, and the
symbol-font check is made once per run instead of once per cluster.
- PDF glyph runs: the baseline (the y most glyphs share) is only worked
out for italic runs, the only ones that use it, and a run on one baseline
returns it without counting.
Tests check each shortcut against the full lookup (every code point for the
bidi classes, every ASCII pair for the clusters).
PDF export of the export_bench document, interleaved with main: median
293 ms -> 241 ms (-18 % with the previous commit). The PDF bytes are
identical.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A paragraph with keep with next measures the paragraph after it before it is
placed (next_first_line). That measurement called layout_para directly, so
every paragraph following a heading was laid out twice in each layout pass:
once to measure it and once, through the cache, when it was placed.
The measurement now goes through the layout cache under the key
para_labelled uses (Ctx::para_ahead) when its inputs are the same: no
proofing, no typed word, not inside a text box, no inline text boxes that
resize, the body's tracked-deletion view. Otherwise it is laid out on its
own as before. It counts nothing (list labels, equation numbers and the
page-total flag are restored), so pagination is unchanged.
Adds crates/engine/examples/export_bench.rs, which saves a long generated
document (the sample document 200 times, 259 pages) through io::save_bytes
and prints wall times:
cargo run --release -p wordcraft-engine --example export_bench -- pdf 200 9
PDF export on that document, interleaved with main (Ryzen, 16 threads):
median 286 ms -> 256 ms (-10.6 %). The PDF bytes are identical.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The package is dual-scope, so the separate -windows-user MSI was the same package under a
second name. Build and policy-check the single plain-named MSI before signing, which is the
name every sibling app, the launcher and the shared windows-arm64 workflow use. Replace the
loop test with one that checks the MSI is policy-checked once, before it is signed.
Checked against the Hunspell 1.7 command line:
- Without a tab or a morphological field the whole line is the entry, so
a phrase with single-byte flags (tök jó/396 in hu_HU) no longer fails
the load or loses its alias; leading blanks belong to the entry.
- With an AF table a flag field is the alias its leading digits number
(fal/2x is alias 2, lab/b has none); an undefined alias, in a .dic
entry or a continuation class, reads as no flags instead of failing
the dictionary; a table without its count line is ignored.
- A REP count line may carry a comment, like AF and ICONV.
normalize copies the input only from its first change on, and SET and
FLAG are found in one pass over the .aff.
Checked against the Hunspell 1.7 command line:
- The first AF and ICONV line is the count even with a trailing comment
(AF 2 # aliases), so alias numbers no longer shift and ICONV 1 # no
longer turns 1 into #.
- A .dic entry ends where Hunspell ends it (dic_entry_end), so ad hoc/B
is one entry and ad alone is no word.
- An undefined alias in a .dic entry reads as no flags: the stem loads
without affixes instead of failing the whole dictionary.
- IGNORE characters are removed from the appended text only; a stripped
text that holds one never matches a stem, as in Hunspell.
- FLAG UTF-8 and SET are found anywhere in the .aff, not only in the
first 8 KB.
Also: normalize borrows the input when no conversion or ignored character
applies, the UTF-8 .aff reader counts fields as it goes and builds its
error context only on error, and the single-byte flag reader is
decode_latin1.
Without FLAG UTF-8, Hunspell reads a field that names one flag (PFX/SFX,
KEEPCASE, FORBIDDENWORD and the like) through decode_flag, which takes its
first byte: SFX é is the flag 0xC3. Such a field no longer fails the load.
SYLLABLENUM lists flags and is read byte by byte like AF. SET and FLAG
read only their first argument, so FLAG UTF-8 with a trailing comment
keeps Unicode flags.
The Hungarian Hunspell dictionary declares SET UTF-8 but writes its flags as single bytes, uses AF aliases and 158 distinct flags. Read flag fields byte by byte unless FLAG UTF-8 is set, expand AF aliases, skip AM, apply ICONV and IGNORE, honour KEEPCASE, and widen flag masks to 256 bits. Compounding and NEEDAFFIX stay unsupported for now.
dpkruse's Genuine Steps Certificate: a bulleted text paragraph closes a
two-column continuous section, then an empty bulleted one closes another.
Word draws no bullet for the empty one; it is now quiet (takes no room) and
draws no label, still counted. A stacked mark that doesn't fit keeps its
line for the caret but draws nothing below the margin (CodeRabbit).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
CodeRabbit (local): keep-lines compared its height with the room below the
mid-page section start, so a paragraph that fits on a new page split instead.
It now compares with the next column, or the next page's body when this is the
last column. A stacked mark whose page break before starts a page no longer
gets the previous page's bottom back.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CX1hMKX28764Lrx5moxs1o
A continuous section moves the column top down below the text above. at_top()
then held at every new section start, so a paragraph that did not fit was
placed anyway, as on an empty page. A run of one-line continuous sections ran
off the bottom of page 1 (100 of them reached 2,480 pt down a 792 pt page).
The overflow checks for paragraphs now use fresh(): at the top with nothing
above on this page. at_top() still drives the spacing rules, unchanged.
Empty paragraphs that close a continuous section right after another
section's mark took no room. Measured in Word on synthetic files ("Start", N
such marks, "End"): 10 put "End" about 9 cm down page 1; 50, 100 and 200 all
put it on the first line of page 2, the same with 24 pt marks or no paragraph
spacing. So each takes its line while it fits, then stays at the page's
bottom. A mark right after text stays quiet, as measured before.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CX1hMKX28764Lrx5moxs1o
Noto Sans Thai and its siblings have no Latin letters or digits, so on a
machine whose only Thai fonts are Noto no face covers the test run and
fallback_for_run rightly returns None. The guard now asks whether the Thai
substitute covers the whole run, which doesn't go through fallback_for_run.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CX1hMKX28764Lrx5moxs1o
Unescaping and escaping again turned and 	 into raw characters that read
back as spaces. The raw value of well-formed markup holds no `<` and every `&` starts
a reference, so only a `"` from a single-quoted value is replaced with ".
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HUodYU9r4mPHed4pPsjHC2
- A package storing WORD/FONTTABLE.XML (part names are case-insensitive) loaded no
embedded fonts and a save dropped the table and every font: lookups used the exact
constant spelling. They now find the key case-insensitively.
- scrub_private re-pushed attribute values raw (quick-xml push_attribute does not
escape), so a value read from single quotes became malformed XML. The value is now
unescaped and escaped again.
- rel_targets matches _rels/ case-insensitively.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HUodYU9r4mPHed4pPsjHC2
Remove the extra blank line before the new navigation regression module's closing brace. No behavior change.
Local cargo xtask ci was attempted but cargo is absent; git diff --check passes. Hosted checks must validate this new SHA.
Give the exact selected issue priority over overlapping grammar when querying the focus, including reversed selections. Keep point lookup for explicit other positions. Add command and pane regressions for overlapping repeated misspellings, correction and undo.
Include command/window/document/canvas integration paths in preview workflow triggers. Preserve historical three-platform evidence while recording f126's successful gate/previews/Windows/Linux and outstanding macOS validation after pre-run cancellations.
These address the three CodeRabbit findings on official #4471. Local cargo xtask ci was attempted but cargo is absent; git diff --check passes. New hosted checks must validate this SHA before any claim of success.
Upstream #4401 merged the baseline Page/Rgb import fix. Keep main's exact tests_linear.rs and merge its current head, removing the equivalent temporary import patch from the final official diff. No proofing/UI behavior changes.
The last fully validated pane revision is 056b18b; the subsequent Read Aloud alignment and this merge need hosted checks and new PNG inspection. Local cargo xtask ci was attempted but cargo is absent; git diff --check passes.
The 056b18b preview confirms full-width context and visible actions, but the text child still shrinks to its contents and pulls the Read Aloud control inward. Keep that child at its allocated width so the control aligns at the right edge as observed in Word.
All five workflows passed at parent 056b18b; both light/dark artifacts were downloaded and inspected. This alignment revision needs new hosted checks and preview inspection. Local cargo xtask ci was attempted but cargo is absent; git diff --check passes.
Inspect the successful 20205a5 light/dark artifacts against the observed Word arrangement. Fill the sentence frame across the pane and bound the suggestion list to roughly three cards, retaining all results through scrolling and keeping ignore/dictionary actions below the list visible.
The direct-correction/undo regression now clicks the first visible engine suggestion rather than relying on an offscreen fourth card. Update comparison/progress records. Normalize the baseline test file's line endings so its final diff contains only the two missing imports.
Parent 20205a5 passed full CI, three-platform Printing/UI checks, targeted proofing tests and preview generation. This layout revision needs new hosted validation and inspected PNGs. Local cargo xtask ci was attempted but cargo is absent; git diff --check passes.
The full gate found missing Page/Rgb imports in main's tests_linear.rs (also tracked by upstream #4401). Add the imports already validated with the French contribution. No layout behavior changes.
The preview run rendered both images and passed all six correction tests, but upload searched the workspace root. Cargo tests run in the crate directory; collect the PNGs from crates/ui-egui instead.
At parent 574cef, Printing passed on Linux, macOS and Windows, including UI tests and browser compatibility. Local cargo xtask ci was attempted but cargo is absent; git diff --check passes. This revision needs new hosted validation.
Replace two deprecated WidgetType aliases with Role::Button, as required by the hosted Windows and macOS Clippy checks.
Local cargo xtask ci was attempted but cargo is not installed on this machine. git diff --check passes. Hosted CI and the preview workflow must validate this revision.
Apply the six formatting hunks reported by the exact-head Printing/CI runs. No behavior change. cargo xtask ci was attempted locally but cargo is absent; hosted checks must validate this revision.
Observe F7 in the installed Word with synthetic text, then replace the central correction form with a right-side task pane. Show sentence context, directly clickable suggestion cards and ignore/dictionary links. Use the existing pane host, palette and original icons; copy no Microsoft assets.
Keep per-window state and clear targets on document switch. Adapt UI tests, pseudo-localization exemptions and light/dark previews. Record observed measurements and remaining feature differences. Local cargo xtask ci was attempted but cargo is absent; exact-head hosted checks and visual comparison remain required.
Keep compact context menus, but show a correction form for user spelling/editor commands. Advance without wrapping after change, ignore or dictionary actions; reject stale targets and retain programmatic command results.
Add navigation/UI regressions and light/dark preview CI. cargo xtask ci was attempted on the preparation PC but cargo is absent; hosted validation is required before integration.
A dictionary is read outside the lock. If the dictionaries folder changed
while it was being read (File › Options › Proofing), the reload emptied
the slot first and the late load then filled it with the old folder's
dictionary. It stayed until the next reload. Every language's copy of
the loader had this window; the shared slot now closes it in one place.
The slot counts reloads. A load that started before a reload still
answers the check that asked for it, but it isn't kept: the next check
reads the new folder.
Found by CodeRabbit on #4191. Tests: a_load_from_before_a_reload_is_not_kept;
not counting reloads fails it. Proof: 288 tests.
The suggestion rounds don't run in rising cost: a MAP diacritic drop (11)
comes before a REP confusion (10, 9 for Russian). The engine checked each
candidate once, at the first cost it was offered, so the same word found
again more cheaply kept the dearer cost and could rank one place too low.
Czech's engine always did this, and the merged engine took it over.
The candidate set is now a map to the cheapest cost offered so far, and
an offer that is no cheaper is skipped as before.
Found by CodeRabbit on #4191. Tests: a_cheaper_later_offer_wins; skipping
every repeat offer again fails it. Proof: 288 tests.
Czech, Croatian, Indonesian, Italian, Polish, Portuguese and Spanish began
their spelling checks with the same thirteen lines, byte for byte: no
dictionary means no marks, single letters and words without letters pass,
words with digits and short words in capitals pass when the File › Options
› Proofing choices say so, and words in another script pass. Each also had
its own copy of the Latin-script test. These were the lines #3966 had to fix
in six copies one by one, and where the Russian and Turkish copies stayed
wrong until the first commit here.
spelling.rs has them once (`word_to_check`), and each language goes on
from there with its own rules (Polish apostrophe endings, Italian elisions,
Indonesian clitics, Uruguayan `vos` forms).
Tests: words_needing_no_lookup. Ignoring the uppercase option there fails
it and all seven languages' proofing-options tests. Proof: 286 tests.
lib.rs named every dictionary language in nine places: reloading for a new
folder, the installed list, load errors, the missing-dictionary hint, the
loaded check, the spelling message, spelling, suggestions and grammar. The
lists had drifted. dictionary_load_error had no Russian or Czech entry, so a
Russian or Czech dictionary that failed to load showed no reason in File ›
Options › Proofing, though the status bar, which reads another list, said
why.
LANGUAGES holds one row per language: its dictionary slot, its spelling
message, and its spelling, suggestion and grammar functions. The nine
functions read the row, so a language now joins with its module, its
ProofLang and one row. The per-language reload_dictionary and
installed_path wrappers had no callers left, inside the crate or out, and
are gone.
Tests: every_dictionary_language_reports_its_load_error, which fails for
Russian on the old code, and the_language_table_covers_the_proofed_languages
(each ProofLang::PROOFED language but English has exactly one row). Proof
285, engine 927 and layout 501 (lib).
Czech's dictionary-driven ranking (case, MAP, REP, missing spaces, KEY,
TRY edits, a stem scan) had five older copies. Polish, Portuguese,
Croatian, Italian and Russian each kept one: 300 to 400 lines of the same
rounds with a few lines of language knowledge mixed in. Fixes reached some
copies only. NOSUGGEST (#1048) and the first-difference tie-break (#797)
never got to all of them, and none had the KEY round or the bound on TRY
letters.
affix_suggest.rs is that ranking once. A language's `Tuning` holds what is
its own: the short words that run into their neighbours (Polish,
Portuguese, Croatian, Italian), Russian's split rule, the letter groups and
confusions its dictionaries lack (Croatian, Russian), letters to try for a
dictionary without a TRY line, and cost hooks for Polish final devoicing
and Russian е/ё. Czech, Indonesian and Spanish use the dictionary's tables
alone. Turkish keeps its own suggester, which reads another dictionary type
with rounds of its own.
The language tables add to the dictionary's instead of replacing them, and
TRY letters are tried in the dictionary's order, commonest first, as the
copies did (the Czech engine sorted them).
Old and new compared on the test dictionaries, with every one-letter typo
of each word plus the tests' misspellings, top eight suggestions: Czech,
Croatian, Italian and Portuguese give the same for all 7,903 inputs.
Polish differs for 44 of 3,244 and Russian for 33 of 2,346, all orderings
among candidates of equal cost, from the tie-break they now share (`ie` →
`nie` before `i`).
New tests pin the moved knowledge: the tuning mechanism, Croatian's groups
without MAP lines, and Russian's costs and split rule. Turning each knob
off fails one. Proof: 283 tests.
user_dictionary_persists_through_a_file saves the whole user dictionary to
a file and loads it back. Run beside
user_dictionary_and_ignore_all_match_both_normalization_forms, it could
catch a word that test had added and bring it back after the test removed
it, so the other test's last check failed now and then (once in about two
dozen full runs here). It now holds DICTIONARY_TESTS, as the other test
does.
Nine languages each kept their own copy of the same code: the installed
dictionary behind a lock, read on first use and logged, replaced by
install_dictionary, forgotten by reload_dictionary, and its file reported
by installed_path. The copies had drifted already. Every one documented that
a dictionary given with install_dictionary has no file and isn't reported,
but only Russian and Czech did that (#3252); the other seven reported the
disk file anyway.
`DictSlot` (proof/src/slot.rs) is that code once. It is generic over the
dictionary type, so Turkish's `TrDict` fits, and keeps the dictionary and
its in-memory origin under one lock as #3252 made it. Each language keeps
its functions as one-line wrappers over its slot, so no caller changes, and
the log lines are the same.
installed_path now follows the documented rule in every language. Nothing
outside tests installs a dictionary in memory, but tests do, concurrently,
so the dictionaries-folder tests in proof and engine could race on the
reported path of a language another test installs. They now accept the
folder's file or none there, and check that the folder is searched first
with hunspell::find, which no install affects.
Tests: proof 279, engine 927, layout 501 (lib); slot.rs has a test of its
own.
#1048 (6e25d482c) taught affix.rs about NOSUGGEST, the dictionary flag for
words that are correct but never offered (vulgarisms, rare forms), and
patched the Polish and Portuguese copies of the suggestion engine; Czech's
started with it. The Croatian, Italian and Russian copies never got it: they
test candidates with `contains`, so a suggestion could be a word the
dictionary says not to offer. They now use `contains_suggestible` and drop a
suggestion with any part `can_suggest` refuses, as the others do.
Tests: Croatian and Italian run the shared assert_nosuggest_is_honoured.
Russian gets its own, since its MAP and REP tables are built in and the
shared Latin-script check doesn't reach them. Each fails on the old code.
#3966 made Ignore words in UPPERCASE and Ignore words that contain numbers
reach six languages' own checks, one copy at a time, and Russian and Turkish
were left out. lib.rs still called `ru::is_correct(word)` and
`tr::is_correct(word)`, which accept words with digits (both) and short words
in capitals (Russian) whatever the options say, so turning either option off
changed nothing in those languages.
Both now have `is_correct_with_options`, like the others. Russian's rule for
a part in capitals (`ИИ-консультант`) follows the option too, as Indonesian's
does, and its digits rule keeps counting superscripts (`м²`). Turkish had no
test dictionary, so its two dictionary tests returned early wherever none was
installed, CI included; it has a synthetic one now, also in the
dictionaries-folder test.
Tests: proofing_options_reach_the_russian_check and
proofing_options_reach_the_turkish_check. Calling the old checks from lib.rs
fails each, and so does ungating the Russian part rule or the Turkish hyphen
recursion.
2026-10-24 19:19:25 -01:00
790 changed files with 84545 additions and 74816 deletions
# Intentionally tracked at @main (not SHA-pinned) so org-wide CI improvements, security fixes, and build optimizations propagate without PR churn across all craftapp repos.
# Only this job publishes the GitHub release, so only it gets write access.
permissions:
contents:write
packages:write
# Intentionally tracked at @main (not SHA-pinned) so org-wide CI improvements, security fixes, and build optimizations propagate without PR churn across all craftapp repos.
These apply in every Craft repository. A later rule may be stricter, not weaker. The source is `standards/house-rules-core.md` in `storytold/craft-contrib`. Propose changes there, not in a copy.
1.**A person is accountable.** Whoever runs an agent answers for what it opens and for its review comments.
2.**Check, then claim.** Before writing code, read the issue comments, search pull requests for `#N` and the keywords, and check recent commits on `main`. Comment on the issue first. Release a claim you will not finish.
3.**Verify, don't guess.** Open a definition before using it. Confirm the cause in the code, even when someone names a location.
4.**Keep fixes narrow and tested.** Fix what the issue describes, where the bug is. Add a test that fails without the fix.
5.**Review the diff before opening a pull request.** Identifiers exist as used, the test fails without the fix, nothing unrelated changed, and the description is true.
6.**Look for a better pull request.** If another fixes the same thing, close yours when it is better or equal, and say why.
7.**Report only what ran.** Say what you tested and what you could not run. Without a local build or test, say so and rely on CI before marking ready.
8.**`main` changes through a pull request.** Do not push to it. Branch protection enforces this. There is no exception.
9.**Stop and ask only about** licensing outside the allowlist, publishing, releases, a new remote, secrets, spending money, destructive git, and anything else hard to undo. Otherwise keep working. `plan/` is a gitignored notebook, not rules. Without it, do not ask for it and do not stop.
10.**Keep secrets and personal details out** of the repository, logs and requests.
11.**CI stays shared.** Workflows call `storytold/craft-common-actions`. Do not change CI in a feature or fix pull request. If CI cannot cover a change, open an issue there.
12.**Guards say why.** A check that looks removable says what it prevents. Read that before changing it.
13.**Instructions must be readable by everyone.** No notes about one machine, and no links to files a reader cannot open. `craftrules` is retired. Do not link to it.
14.**Keep pull requests moving.** Concurrent pull requests are fine; unanswered actionable feedback is not. Respond in 7 days, a reminder at 14, closure eligible at 30, from when an actionable request waits on the author. Suggestions and unconfirmed bot findings do not start the clock. A fix, explanation or agreed plan resets it; unrelated activity does not. Waiting on a reviewer or maintainer pauses it and does not count against the author. A maintainer decides closure; it is never automatic. Reuse search results, do not poll, and stop at a rate limit.
15.**No agent attribution.** A pull request does not say an agent wrote it. A repository rule may not require that.
These apply to native Craft apps and to shared Rust libraries. Select them by repository type. A repository that merely contains some Rust does not take this block. Rules later in a repository's file may be stricter, but not weaker. The source is `standards/house-rules-rust.md` in [storytold/craft-contrib](https://github.com/storytold/craft-contrib).
1.**Never crash.** Non-test code does not panic and has no `unsafe`, except where the repository file names an exception. Return errors, treat input as hostile, and bound recursion and allocations. New production crate roots copy the `deny` attribute from an existing crate: `clippy::unwrap_used`, `clippy::expect_used`, `clippy::panic`, `clippy::unimplemented`, `clippy::todo`, `clippy::unreachable`. Every crash fix comes with a test that panicked before the fix.
2.**Clean room.** Learn from observed behaviour and public specifications. Do not copy another product's code, assets, strings or artwork. Check a dependency's licence before adding it.
3.**Assets and fonts.** Every asset is original or suitably licensed, and is recorded in `ATTRIBUTION.md` in the same change. Font files live in [storytold/craft-fonts](https://github.com/storytold/craft-fonts), not in the app repository.
4.**Rust only for native Craft apps.** No handwritten JavaScript or TypeScript, and no Tauri, Electron or webview shell, in those apps. Shared tooling follows its documented technical scope and maintainer-approved exceptions. Craft PR Review's existing Tauri and TypeScript UI is one such exception. It does not relax this rule for native apps. Preserve any existing web build.
5.**Time goes through `chrono`.** Do not hand-roll calendar conversion. For dates beyond what `chrono` can represent, follow [standards/time.md](https://github.com/storytold/craft-contrib/blob/main/standards/time.md).
6.**Contributor credits.** Add or edit only your own person's entry in `contributors/people.toml`, and only after asking them. Never guess a name or hand-edit `contributors.json`.
## Licence allowlist
Dependencies and assets use SPDX identifiers. An expression is allowed when every identifier is in this list. A repository may name a shorter list. It may not add an identifier here by editing its own copy of these rules.
-`ISC`
-`MIT`
-`BSD-2-Clause`
-`BSD-3-Clause`
-`Apache-2.0`
-`OFL-1.1`
-`Ubuntu-font-1.0`
-`Bitstream-Vera`
-`CC0-1.0`
-`CC-BY-4.0`
-`CC-BY-SA-4.0`
-`LicenseRef-Public-Domain`
`LicenseRef-Storyteller-Trademark` is not in this list. It covers Storyteller brand marks only, where a repository already says so.
<!-- craft-house-rules:end -->
# WordCraft — instructions for agents
WordCraft is a clean-room, open-source, Rust-native word processor targeting Microsoft Word parity — and going further on speed, openness and agent control. It runs natively on macOS, Windows, Linux and BSD, and on the web via WASM. Siblings with the same conventions: `../photocraft` (Photoshop), `../vectorcraft` (Illustrator), `../filmcraft` (Premiere), `../lightcraft` (Lightroom), `../pdfcraft` (Acrobat), `../effectcraft` (After Effects), `../designcraft` (InDesign). Shared rules and learnings: [`storytold/craftrules`](https://github.com/storytold/craftrules) (`../../craftrules`) — read its `AGENTS.md`.
WordCraft is a clean-room, open-source, Rust-native word processor targeting Microsoft Word parity — and going further on speed, openness and agent control. It runs natively on macOS, Windows, Linux and BSD, and on the web via WASM. Siblings with the same conventions: `../photocraft` (Photoshop), `../vectorcraft` (Illustrator), `../filmcraft` (Premiere), `../lightcraft` (Lightroom), `../pdfcraft` (Acrobat), `../effectcraft` (After Effects), `../designcraft` (InDesign).
## Start every session here
1.Read `plan/STATUS.md` (current milestone, next task), then the task in `plan/execution-plan.md` and the relevant `plan/architecture.md` section. `plan/` is gitignored (local only); if it's missing, start from `ROADMAP.md`, `docs/gaps.md` and `docs/roadmap.md` (Current focus).
2. Follow the autonomous operation protocol (`plan/execution-plan.md` §5). Don't stop to ask unless a decision is genuinely the owner's (licensing, publishing, pushing to new remotes, secrets).
Read [`ROADMAP.md`](ROADMAP.md), [`docs/gaps.md`](docs/gaps.md) and [`docs/roadmap.md`](docs/roadmap.md). `plan/` is an optional gitignored notebook. Do not ask for it and do not stop when it is absent.
## Never crash
People trust WordCraft with their writing; a crash loses their work. **This outranks feature work**: never ship a feature through a panic path, and fix a crash before building on top of it. Standard: [`craftrules/standards/never-crash.md`](https://github.com/storytold/craftrules/blob/main/standards/never-crash.md).
People trust WordCraft with their writing; a crash loses their work. **This outranks feature work**: never ship a feature through a panic path, and fix a crash before building on top of it.
- **No panics in non-test code:** no `unwrap()`, `expect()`, `panic!`, `unreachable!`, `todo!`, `unimplemented!`; no `unsafe` (`unsafe_code = "forbid"`).
- **Errors are `Result<T, E>`** through the crate's error type and `?`. An unfinished feature returns an error or is disabled; it never panics.
- **Input-derived numbers are hostile** (files, commands, MCP/control params): `get()` instead of `[i]`, slice strings only at char boundaries, checked/saturating arithmetic, clamp sizes, cap allocations, bound recursion.
@@ -20,7 +72,7 @@ People trust WordCraft with their writing; a crash loses their work. **This outr
- Never copy, trace, screenshot-crop or recreate icons, images, templates, themes, clip art, fonts, cursors, sounds or any other asset from Microsoft Word/Office or any Microsoft, Adobe, Avid or Autodesk product. Not even "temporarily".
- Every asset must be **original** (drawn in code — prefer this: `crates/ui-egui/src/icons.rs`), **public domain / CC0**, **OSI open source**, or **Creative Commons that allows redistribution**, or licensed open source by a contributor who made it.
- **Every asset file has a row in [`ATTRIBUTION.md`](ATTRIBUTION.md)** (author, source, licence). `cargo xtask assets` (part of `cargo xtask ci`) fails otherwise. Add the row in the same commit as the file.
- Fonts: new font files go to [`storytold/craft-fonts`](https://github.com/storytold/craft-fonts), never this repo; it's an optional build input (`CRAFT_FONTS_DIR`). Documents asking for proprietary fonts (Calibri, Aptos, Cambria…) are rendered with installed system fonts or metric-compatible open substitutes (`crates/fonts/src/word.rs`) — never bundle proprietary fonts.
- Fonts: new font files go to [`storytold/craft-fonts`](https://github.com/storytold/craft-fonts), never this repo; it's an optional build input (`CRAFT_FONTS_DIR`). Spelling word lists and hyphenation patterns live in [`storytold/craft-i18n`](https://github.com/storytold/craft-i18n) `language-data/`, never this repo; they are embedded from `CRAFT_I18N_DIR` (pinned by `craft-i18n.rev`, which CI checks out). Without it the app builds, but English spelling falls back to an installed Hunspell English or the built-in Moby word list (with no American/British variant table) and pattern hyphenation is off (Bulgarian, Turkish and Russian still hyphenate by rule), so proofing tests need it. Documents asking for proprietary fonts (Calibri, Aptos, Cambria…) are rendered with installed system fonts or metric-compatible open substitutes (`crates/fonts/src/word.rs`) — never bundle proprietary fonts.
- Templates, sample documents and themes are our own text and colours (`crates/engine/src/sample.rs`, `cmd/design.rs`). Demo images are public domain, with sources recorded.
## Clean room
@@ -28,22 +80,22 @@ People trust WordCraft with their writing; a crash loses their work. **This outr
- Never read, disassemble or copy anything inside the Word bundle (file names/listings only). Never commit files produced by Word. Never copy Microsoft wording beyond feature names.
- File formats come from public specs: ECMA-376 / ISO 29500 (OOXML), the published RTF spec, OASIS ODF 1.3. Never copy GPL/LGPL/AGPL code (LibreOffice, AbiWord, pandoc…).
| external | `craft-proof` (craft-libs, used as `wordcraft-proof`, sits at L1) | proofing: spelling, grammar, hyphenation; its word lists and patterns are craft-i18n's `language-data/` (`CRAFT_I18N_DIR`) |
- **Everything is a command.** User-visible behaviour = a `CommandSpec` in `crates/engine/src/cmd/*.rs` (id, label, ribbon location, shortcut, params doc, `enabled`, `run`) + tests. UI-only commands (`ui.*`) live in `crates/ui-egui/src/lib.rs`. The ribbon, shortcuts, command search, CLI, control channel and MCP all dispatch by id. Programmatic calls never open dialogs.
- **Parity is measured:** `crates/engine/src/catalog.rs` lists Word's ribbon/menu features with command ids. `cargo xtask parity` writes `docs/parity-checklist.md`; a test enforces a floor that only rises. Implement missing ids to raise it.
- **Layering** is enforced by `cargo xtask layers`. Nothing below L6 depends on egui/eframe/winit/rfd. The UI is thin and reads `Session` state; colours come from `theme::Tokens`.
- **Time goes through `chrono`** (workspace dependency). Never hand-roll UTC/calendar conversion (days-to-date algorithms, leap-year math). A crate owns only its output format string. The one exception is range extension: past the years chrono can represent, shift the date by whole 400-year Gregorian cycles (146,097 days, after which the calendar repeats), let chrono compute the month and day, and add the cycles back to the year (splitting seconds into hours, minutes and seconds is plain arithmetic).
@@ -63,22 +115,26 @@ Typing, Enter, Backspace, Tab, lists, AutoCorrect and AutoFormat follow Word's o
- Parallel agents: separate `CARGO_TARGET_DIR` per agent; edit only the crates you own; delete your target dir when done (disk).
## Roadmap
Progress docs follow [`craftrules/standards/progress-docs.md`](https://github.com/storytold/craftrules/blob/main/standards/progress-docs.md): `ROADMAP.md` (stage, headline numbers, progress log), `docs/target-app-parity.md` (the assessment), `docs/gaps.md` (ranked work list), `docs/roadmap.md` (milestones, Current focus), `docs/architecture.md`, and the parity checklists `docs/file-format-parity.md`, `docs/layout-parity.md`, `docs/typing-parity.md`, `docs/ui-parity.md`, `docs/hardware-parity.md`, `docs/localization-parity.md`. When work lands, update the gap, the parity doc and the progress log, and bump each touched doc's status line and revision history.
Progress docs: `ROADMAP.md` (stage, headline numbers, progress log), `docs/target-app-parity.md` (the assessment), `docs/gaps.md` (ranked work list), `docs/roadmap.md` (milestones, Current focus), `docs/architecture.md`, and the parity checklists `docs/file-format-parity.md`, `docs/layout-parity.md`, `docs/typing-parity.md`, `docs/ui-parity.md`, `docs/hardware-parity.md`, `docs/localization-parity.md`. When work lands, update the gap, the parity doc and the progress log, and bump each touched doc's status line and revision history.
## Contributor credits (About window)
- About ▸ Contributors/Models are compiled into the binary from `contributors/contributors.json`
(commit stats; generated, never hand-edit) and `contributors/people.toml` (names people chose for
(commit stats; never hand-edit) and `contributors/people.toml` (names people chose for
themselves). See `docs/contributors.md`.
- **Agents working for a contributor:** when you prepare a PR, check whether your human's GitHub
username has a `[people.<username>]` entry in `contributors/people.toml`. If not, ask them once
whether they want to be credited by more than their username: a real name, a display name, and/or
their public GitHub profile name (`sync_github_name = true`). If yes, add **only their own** entry
and include it in their PR, committed as them. If no, change nothing: they are credited as
`@username` anyway.
- Never add, edit, guess or copy anyone else's entry or name (not from git config, commit authors or
GitHub profiles). Never hand-edit `contributors.json`.
- Maintainers refresh the stats with `python3 ../../craftrules/scripts/contributors.py .` (it also
re-verifies who wrote each `people.toml` entry; `--check` only verifies).
## CI workflows
- Workflows in `.github/workflows/` call the shared workflows in [`storytold/craft-common-actions`](https://github.com/storytold/craft-common-actions) at `@main`, with their inputs and secrets. No other jobs: if no shared workflow does what's needed, it doesn't go here.
- Don't add or change CI in a feature or fix PR. If the existing workflows can't build or test a change, link an existing craft-common-actions issue or PR, or open a new issue, or a PR only for a small fix that is safe for every app and does not increase CI time.
- Some workflow files here still run their own jobs. Don't add to them. Moving a job into craft-common-actions is its own task, never part of another PR, and the job stays here until a shared workflow runs it.
New workspace crates include `workspace = true` under `[lints]` in `Cargo.toml`. Production crate roots declare the crate-level lint attributes before modules; crate-level `//!` documentation may precede them.
@@ -10,15 +10,6 @@ Generated-in-code art is original and has no file to list: the UI icon set (`cra
|---|---|---|---|---|
| `egui` dependency: `epaint_default_fonts/fonts/egui-icons.ttf` | John Slegers (emoji-icon-font) | https://github.com/storytold/egui/blob/173cc7375d35dc5fbc5b5d0994fdf787f547c5d1/crates/epaint_default_fonts/fonts/egui-icons.txt; original https://github.com/jslegers/emoji-icon-font | MIT (full copyright and permission text in NOTICE) | Small egui special-icon subset; embedded by default_fonts, retained in FontDefinitions::default() |
| `egui` dependency: `epaint_default_fonts/fonts/emoji-icon-font.ttf` | John Slegers | https://github.com/storytold/egui/blob/173cc7375d35dc5fbc5b5d0994fdf787f547c5d1/crates/epaint_default_fonts/fonts/emoji-icon-font-mit-license.txt; original https://github.com/jslegers/emoji-icon-font | MIT (full copyright and permission text in NOTICE) | Parent monochrome icon/emoji face embedded by monochrome_emoji_fonts; separate from the egui-icons subset |
| `assets/hyphenation/en-us.pat` | DesignCraft contributors (generated) | trained from the Moby list by DesignCraft's patgen | Public Domain (CC0-1.0) | Our own Liang hyphenation patterns (no TeX patterns) |
| `assets/hyphenation/en-us.dic` | Grady Ward (Moby Hyphenator II word list); converted by DesignCraft contributors | https://www.gutenberg.org/ebooks/3204 (file `mhyph.txt`, SHA-256 `eeb30474c86b8af3469035ec1a0913e35905325ca885290db9dfed9881e230ac`), via DesignCraft | Public Domain | ~165k words with break points; drives spelling and hyphenation |
| `assets/spelling/en-extra.txt` | WordCraft contributors | original word list written for this repository (common modern words the Moby list lacks); no other dictionary copied | MIT OR Apache-2.0 | ~240 lowercase English base forms supplementing spelling (#520), including British spellings (#40) |
| `assets/spelling/en-variants.txt` | WordCraft contributors | original list written for this repository from general knowledge of English spelling; no other dictionary or variant list copied | MIT OR Apache-2.0 | ~280 American/British spelling pairs (-or/-our, -er/-re, -ize/-ise, -yze/-yse, -ense/-ence, doubled l, ae/oe…) with a policy per English: en-US, en-CA and the British-spelling Englishes (#1281, #1045) |
| `assets/spelling/ru-extra.txt` | WordCraft contributors | original word list written for this repository (common modern Russian words older Hunspell dictionaries lack, with their declension classes); no other dictionary copied | MIT OR Apache-2.0 | ~200 Russian base forms supplementing spelling; their forms are generated by `crates/proof/src/ru/extra.rs` |
| `assets/hyphenation/pl.pat` | Hanna Kołodziejska, Bogusław Jackowski, Marek Ryćko (Polish TeX hyphenation patterns, 1987–1995); hyph-utf8 package | https://github.com/hyphenation/tex-hyphen (`hyph-utf8/tex/generic/hyph-utf8/patterns/tex/hyph-pl.tex`, SHA-256 `83ddbbd21bc06a44bc4f4a4c49c38782e809cff5f026b764c044daa29e818843`), bundled unmodified | MIT (the file is offered under MIT or Knuth's public-domain terms; WordCraft uses MIT, whose notice is in the file's header) | 4,053 Liang patterns and 20 exception words; Polish hyphenation |
| `assets/hyphenation/pt.pat` | Pedro J. de Rezende, J. Joao Dias Almeida, Leonardo Araujo, Aline Benevides (Portuguese TeX hyphenation patterns, 1987–2024); hyph-utf8 package | https://github.com/hyphenation/tex-hyphen (`hyph-utf8/tex/generic/hyph-utf8/patterns/tex/hyph-pt.tex`, SHA-256 `c110a39e501db372d1d755e1c64464321a2efa7d8e9617f66001000389b941f2`), bundled unmodified | BSD 3-clause (the file's licence header names it and carries the notice) | 426 Liang patterns and 2 exception words; Portuguese hyphenation |
| `assets/hyphenation/it.pat` | Claudio Beccari (Italian TeX hyphenation patterns, 2008–2014); hyph-utf8 package | https://github.com/hyphenation/tex-hyphen (`hyph-utf8/tex/generic/hyph-utf8/patterns/tex/hyph-it.tex`, SHA-256 `6ce56ed6ed2ca7c0688838e366e6595e0429f984f4fc6e96ec045cebb1e76a47`), bundled unmodified | MIT (the file is offered under LPPL 1.3+ or MIT; WordCraft uses MIT, whose notice is in the file's header) | 355 Liang patterns, no exception words; Italian hyphenation |
| `assets/hyphenation/de.pat` | Deutschsprachige Trennmustermannschaft: Stephan Hennig, Werner Lemberg, Günter Milde, Sander van Geloven, Georg Pfeiffer, Gisbert W. Selke, Tobias Wendorf, Keno Wehr (German TeX hyphenation patterns, reformed spelling, 2013–2024); hyph-utf8 package | https://github.com/hyphenation/tex-hyphen (`hyph-utf8/tex/generic/hyph-utf8/patterns/tex/hyph-de-1996.tex`, SHA-256 `374ad1ce3263f8a2791ec070ef9b516c532dae64456f3fb656e617e8ae53a9d3`), bundled unmodified | MIT (the notice is in the file's header) | 36,709 Liang patterns, no exception words; German hyphenation (de-DE, de-AT, de-CH) |
| `assets/app-icon/wordcraft-1024.png` | WordCraft contributors | original artwork drawn in SVG (`assets/app-icon/wordcraft.svg`), rendered by `packaging/icons.sh` | MIT OR Apache-2.0 | Placeholder app icon until the WordCraft mascot drawing lands |
| `packaging/macos/dmg/background.svg` | @XusBadia | original work for this repository, derived from the WordCraft app icon (`assets/app-icon/wordcraft.svg`, referenced via `<image>`, not copied); text is outlined Inter / JetBrains Mono glyph paths | MIT OR Apache-2.0, like the code ([`LICENSE-MIT`](LICENSE-MIT), [`LICENSE-APACHE`](LICENSE-APACHE)) | WordCraft macOS DMG window background (2026-10-08); used for the Finder window of the macOS DMG, rendered to `background.tiff` by `packaging/macos/dmg/generate.py` |
| `packaging/macos/dmg/background.tiff` | @XusBadia | Rendered from `packaging/macos/dmg/background.svg` by `packaging/macos/dmg/generate.py` | MIT OR Apache-2.0, like the code ([`LICENSE-MIT`](LICENSE-MIT), [`LICENSE-APACHE`](LICENSE-APACHE)) | 1x + 2x HiDPI TIFF for the macOS DMG window; includes the app icon (see its row) and LittleCMS's built-in sRGB profile ("No copyright, use freely") |
@@ -59,14 +50,15 @@ Generated-in-code art is original and has no file to list: the UI icon set (`cra
| `docs/images/dark.png` | WordCraft contributors | screenshot of WordCraft itself (sample document written for WordCraft, rendered by `ui_shot`) | MIT OR Apache-2.0 | Original; no Microsoft UI or assets |
| `docs/images/backstage.png` | WordCraft contributors | screenshot of WordCraft itself (sample document written for WordCraft, rendered by `ui_shot`) | MIT OR Apache-2.0 | Original; no Microsoft UI or assets |
| `docs/images/layout.png` | WordCraft contributors | screenshot of WordCraft itself (sample document written for WordCraft, rendered by `ui_shot`) | MIT OR Apache-2.0 | Original; no Microsoft UI or assets |
| `docs/brand/LICENSE-brand.txt` | ArtCraft Team | craftrules `assets/brand/` | ArtCraft trademark, `docs/brand/LICENSE-brand.txt` | Not open source; usable unmodified only |
| `docs/brand/artcraft-logo-white.png` | ArtCraft Team | craftrules `assets/brand/` | ArtCraft trademark, `docs/brand/LICENSE-brand.txt` | Not open source; usable unmodified only |
| `docs/brand/artcraft-logo-white.svg` | ArtCraft Team | craftrules `assets/brand/` | ArtCraft trademark, `docs/brand/LICENSE-brand.txt` | Not open source; usable unmodified only |
| `docs/brand/artcraft-logo.png` | ArtCraft Team | craftrules `assets/brand/` | ArtCraft trademark, `docs/brand/LICENSE-brand.txt` | Not open source; usable unmodified only |
| `docs/brand/artcraft-logo.svg` | ArtCraft Team | craftrules `assets/brand/` | ArtCraft trademark, `docs/brand/LICENSE-brand.txt` | Not open source; usable unmodified only |
| `docs/brand/artcraft-mark-black.png` | ArtCraft Team | craftrules `assets/brand/` | ArtCraft trademark, `docs/brand/LICENSE-brand.txt` | Not open source; usable unmodified only |
| `docs/brand/artcraft-mark-black.svg` | ArtCraft Team | craftrules `assets/brand/` | ArtCraft trademark, `docs/brand/LICENSE-brand.txt` | Not open source; usable unmodified only |
| `docs/brand/artcraft-mark.png` | ArtCraft Team | craftrules `assets/brand/` | ArtCraft trademark, `docs/brand/LICENSE-brand.txt` | Not open source; usable unmodified only |
| `docs/brand/artcraft-mark.svg` | ArtCraft Team | craftrules `assets/brand/` | ArtCraft trademark, `docs/brand/LICENSE-brand.txt` | Not open source; usable unmodified only |
| `docs/brand/LICENSE-brand.txt` | ArtCraft Team | ArtCraft brand kit (project owner) | ArtCraft trademark, `docs/brand/LICENSE-brand.txt` | Not open source; usable unmodified only |
| `docs/brand/artcraft-logo-white.png` | ArtCraft Team | ArtCraft brand kit (project owner) | ArtCraft trademark, `docs/brand/LICENSE-brand.txt` | Not open source; usable unmodified only |
| `docs/brand/artcraft-logo-white.svg` | ArtCraft Team | ArtCraft brand kit (project owner) | ArtCraft trademark, `docs/brand/LICENSE-brand.txt` | Not open source; usable unmodified only |
| `docs/brand/artcraft-logo.png` | ArtCraft Team | ArtCraft brand kit (project owner) | ArtCraft trademark, `docs/brand/LICENSE-brand.txt` | Not open source; usable unmodified only |
| `docs/brand/artcraft-logo.svg` | ArtCraft Team | ArtCraft brand kit (project owner) | ArtCraft trademark, `docs/brand/LICENSE-brand.txt` | Not open source; usable unmodified only |
| `docs/brand/artcraft-mark-black.png` | ArtCraft Team | ArtCraft brand kit (project owner) | ArtCraft trademark, `docs/brand/LICENSE-brand.txt` | Not open source; usable unmodified only |
| `docs/brand/artcraft-mark-black.svg` | ArtCraft Team | ArtCraft brand kit (project owner) | ArtCraft trademark, `docs/brand/LICENSE-brand.txt` | Not open source; usable unmodified only |
| `docs/brand/artcraft-mark.png` | ArtCraft Team | ArtCraft brand kit (project owner) | ArtCraft trademark, `docs/brand/LICENSE-brand.txt` | Not open source; usable unmodified only |
| `docs/brand/artcraft-mark.svg` | ArtCraft Team | ArtCraft brand kit (project owner) | ArtCraft trademark, `docs/brand/LICENSE-brand.txt` | Not open source; usable unmodified only |
| craft-fonts (optional build input, not files in this repo): BIZ UDPGothic, BIZ UDMincho, Shippori Mincho, Noto Sans CJK SC, Noto Sans Arabic | see https://github.com/storytold/craft-fonts/blob/main/ATTRIBUTION.md | embedded only when built with `CRAFT_FONTS_DIR` (all official releases) | OFL-1.1 | Japanese and Chinese UI, Japanese document fallback |
| craft-i18n (optional build input, not files in this repo): the interface translations | see https://github.com/storytold/craft-i18n/blob/main/ATTRIBUTION.md, which credits every translator of WordCraft's former in-repo catalogs (`crates/ui-egui/src/i18n/*.tsv`, migrated at `wordcraft@806a945`) | embedded only when built with `CRAFT_I18N_DIR`, at the commit in `craft-i18n.rev` (all official releases) | MIT OR Apache-2.0 | Interface languages other than English; clean-room translations from the English interface labels |
| craft-i18n Language data (optional build input, not files in this repo): the spelling word lists and hyphenation patterns (`language-data/`: the Moby Hyphenator II list and our patterns for English, `en-extra.txt`, `en-variants.txt`, `ru-extra.txt`, and the hyph-utf8 German, Polish, Portuguese and Italian patterns) | see the Language data section of https://github.com/storytold/craft-i18n/blob/main/ATTRIBUTION.md (authors, upstream sources with SHA-256, licences); moved there from `assets/hyphenation/` and `assets/spelling/` byte for byte | embedded by craft-proof (storytold/craft-libs) only when built with `CRAFT_I18N_DIR`, at the commit in `craft-i18n.rev` (all official releases) | Public Domain / CC0-1.0, MIT, BSD-3-Clause, MIT OR Apache-2.0 (per file; see NOTICE) | Spelling and hyphenation; without it English spelling falls back to an installed Hunspell English or craft-proof's built-in Moby list, and pattern hyphenation is off |
WordCraft is a clean-room, open-source, Rust-native word processor targeting Microsoft Word parity — and going further on speed, openness and agent control. It runs natively on macOS, Windows, Linux and BSD, and on the web via WASM. Siblings with the same conventions: `../photocraft` (Photoshop), `../vectorcraft` (Illustrator), `../filmcraft` (Premiere), `../lightcraft` (Lightroom), `../pdfcraft` (Acrobat), `../effectcraft` (After Effects), `../designcraft` (InDesign). Shared rules and learnings: [`storytold/craftrules`](https://github.com/storytold/craftrules) (`../../craftrules`) — read its `AGENTS.md`.
## Start every session here
1. Read `plan/STATUS.md` (current milestone, next task), then the task in `plan/execution-plan.md` and the relevant `plan/architecture.md` section. `plan/` is gitignored (local only); if it's missing, start from `ROADMAP.md`, `docs/gaps.md` and `docs/roadmap.md` (Current focus).
2. Follow the autonomous operation protocol (`plan/execution-plan.md` §5). Don't stop to ask unless a decision is genuinely the owner's (licensing, publishing, pushing to new remotes, secrets).
## Never crash
People trust WordCraft with their writing; a crash loses their work. **This outranks feature work**: never ship a feature through a panic path, and fix a crash before building on top of it. Standard: [`craftrules/standards/never-crash.md`](https://github.com/storytold/craftrules/blob/main/standards/never-crash.md).
- **No panics in non-test code:** no `unwrap()`, `expect()`, `panic!`, `unreachable!`, `todo!`, `unimplemented!`; no `unsafe` (`unsafe_code = "forbid"`).
- **Errors are `Result<T, E>`** through the crate's error type and `?`. An unfinished feature returns an error or is disabled; it never panics.
- **Input-derived numbers are hostile** (files, commands, MCP/control params): `get()` instead of `[i]`, slice strings only at char boundaries, checked/saturating arithmetic, clamp sizes, cap allocations, bound recursion.
- **Last-resort guard:** `Session::run` turns an escaped panic into an error and restores the document. It's a safety net, not a licence.
- **Prove it:** every crash fix lands with a regression test. `crates/engine/src/tests.rs::hostile_params_never_panic` runs every command with junk params — keep it green.
- Production crate roots carry `#![deny(clippy::unwrap_used, clippy::expect_used, clippy::panic, clippy::unimplemented, clippy::todo, clippy::unreachable)]`; new crates start with it. Tests may `unwrap` (`clippy.toml`).
## Assets: absolutely no Microsoft (or Adobe/Avid/Autodesk) iconography or images
**This rule is non-negotiable.** Breaking it is the worst mistake you can make in this repo.
- Never copy, trace, screenshot-crop or recreate icons, images, templates, themes, clip art, fonts, cursors, sounds or any other asset from Microsoft Word/Office or any Microsoft, Adobe, Avid or Autodesk product. Not even "temporarily".
- Every asset must be **original** (drawn in code — prefer this: `crates/ui-egui/src/icons.rs`), **public domain / CC0**, **OSI open source**, or **Creative Commons that allows redistribution**, or licensed open source by a contributor who made it.
- **Every asset file has a row in [`ATTRIBUTION.md`](ATTRIBUTION.md)** (author, source, licence). `cargo xtask assets` (part of `cargo xtask ci`) fails otherwise. Add the row in the same commit as the file.
- Fonts: new font files go to [`storytold/craft-fonts`](https://github.com/storytold/craft-fonts), never this repo; it's an optional build input (`CRAFT_FONTS_DIR`). Documents asking for proprietary fonts (Calibri, Aptos, Cambria…) are rendered with installed system fonts or metric-compatible open substitutes (`crates/fonts/src/word.rs`) — never bundle proprietary fonts.
- Templates, sample documents and themes are our own text and colours (`crates/engine/src/sample.rs`, `cmd/design.rs`). Demo images are public domain, with sources recorded.
## Clean room
- Microsoft Word is installed on the dev machine and may be **observed** black-box: run it, use its UI with synthetic documents, take screenshots **of its window only** (by window id — the machine runs other work; never capture the whole desktop) stored only under `plan/word/screenshots/` (gitignored, never committed).
- Never read, disassemble or copy anything inside the Word bundle (file names/listings only). Never commit files produced by Word. Never copy Microsoft wording beyond feature names.
- File formats come from public specs: ECMA-376 / ISO 29500 (OOXML), the published RTF spec, OASIS ODF 1.3. Never copy GPL/LGPL/AGPL code (LibreOffice, AbiWord, pandoc…).
- **Everything is a command.** User-visible behaviour = a `CommandSpec` in `crates/engine/src/cmd/*.rs` (id, label, ribbon location, shortcut, params doc, `enabled`, `run`) + tests. UI-only commands (`ui.*`) live in `crates/ui-egui/src/lib.rs`. The ribbon, shortcuts, command search, CLI, control channel and MCP all dispatch by id. Programmatic calls never open dialogs.
- **Parity is measured:** `crates/engine/src/catalog.rs` lists Word's ribbon/menu features with command ids. `cargo xtask parity` writes `docs/parity-checklist.md`; a test enforces a floor that only rises. Implement missing ids to raise it.
- **Layering** is enforced by `cargo xtask layers`. Nothing below L6 depends on egui/eframe/winit/rfd. The UI is thin and reads `Session` state; colours come from `theme::Tokens`.
Before every commit: `cargo xtask ci` (fmt, clippy -D warnings, tests, assets, layers, wasm). Commit after every arc of work that builds, with a task id in the message (`M2.1: line spacing dialog`).
## Typing behaves like Word
Typing, Enter, Backspace, Tab, lists, AutoCorrect and AutoFormat follow Word's observed behaviour in [`docs/typing-parity.md`](docs/typing-parity.md), pinned by `crates/engine/src/tests/typing.rs` (keys go through the same commands as the keyboard). Change behaviour, doc and tests together; a typing fix lands with a test there. Compare headlessly (`ui_shot`); don't drive GUIs with keystrokes on the shared machine.
## Running and looking at the app
-`cargo run --release -p wordcraft -- --sample --control 7981` (sample document + control channel).
- Drive it with JSON lines on `127.0.0.1:7981`, each with the window's key from `~/.config/wordcraft/control-key.local-7981` (macOS: `~/Library/Application Support/WordCraft/`), e.g. `{"id":1,"key":"…","method":"engine.execute","params":{"command":"text.insert","params":{"text":"Hello"}}}` then `{"id":2,"key":"…","method":"ui.screenshot","params":{"path":"/tmp/shot.png"}}`. Methods: `crates/ui-egui/src/control.rs`; docs: `docs/control-protocol.md` (Keys).
- **Headless window screenshots** (no focus stealing, works with a locked screen): `cargo run --release -p wordcraft-ui-egui --example ui_shot -- script.jsonl` (see the example's header).
- **For UI work, look at the result** (screenshot, read the PNG) and compare with Word side by side.
- MCP: `wordcraft-cli mcp` (headless) or `wordcraft-cli mcp --connect 127.0.0.1:7981` (drives the running app). See `docs/mcp.md`.
- Shell gotcha: `mv`/`cp` may be aliased interactive — use `/bin/mv -f` / `/bin/cp -f`.
- Parallel agents: separate `CARGO_TARGET_DIR` per agent; edit only the crates you own; delete your target dir when done (disk).
## Roadmap
Progress docs follow [`craftrules/standards/progress-docs.md`](https://github.com/storytold/craftrules/blob/main/standards/progress-docs.md): `ROADMAP.md` (stage, headline numbers, progress log), `docs/target-app-parity.md` (the assessment), `docs/gaps.md` (ranked work list), `docs/roadmap.md` (milestones, Current focus), `docs/architecture.md`, and the parity checklists `docs/file-format-parity.md`, `docs/layout-parity.md`, `docs/typing-parity.md`, `docs/ui-parity.md`, `docs/hardware-parity.md`, `docs/localization-parity.md`. When work lands, update the gap, the parity doc and the progress log, and bump each touched doc's status line and revision history.
@@ -124,7 +124,7 @@ Every screenshot below is WordCraft itself, rendered offscreen by its own UI tes
| **References** | Table of contents, footnotes and endnotes, citations and bibliography (APA, MLA, Chicago, IEEE), captions, table of figures, cross-references, index, table of authorities |
| **Review** | Spelling and grammar with suggestions (English and Polish, by each run's language), thesaurus, word count, comments in margin balloons or a pane, track changes, accept/reject, compare documents, restrict editing, accessibility checker, document inspector |
| **Mailings** | Mail merge from CSV, merge fields, address block, greeting line, rules, preview, finish to a document; envelopes and labels |
| **View** | Print layout, web layout, draft, read mode, focus, zoom, one/multiple pages, page width, Navigation pane, rulers, gridlines, dark mode; interface in English, 简体中文, 繁體中文, 日本語, Português (Brasil), Español, Українська, Српски / Srpski, Eesti, Türkçe, Русский, Italiano, Deutsch, Polski, Čeština, Magyar, Français, Български, Tiếng Việt, 한국어, Svenska, Hrvatski or Slovenščina (follows the system language by default) |
| **View** | Print layout, web layout, draft, read mode, focus, zoom, one/multiple pages, page width, Navigation pane, rulers, gridlines, dark mode; interface in English, 简体中文, 繁體中文, 日本語, Português (Brasil), Español, Українська, Српски / Srpski, Eesti, Türkçe, Русский, Italiano, Deutsch, Polski, Čeština, Magyar, Français, Български, Tiếng Việt, 한국어, Svenska, Hrvatski, Nederlands, Dansk, Română, العربية (mirrored) or Slovenščina (follows the system language by default) |
| arm64 (Snapdragon and other ARM PCs) | `wordcraft-<ver>-windows-arm64.msi` |`wordcraft-<ver>-windows-user-arm64.msi` |`wordcraft-<ver>-windows-arm64-portable.zip` |
| x86 (32-bit) | `wordcraft-<ver>-windows-x86.msi` |`wordcraft-<ver>-windows-user-x86.msi` |`wordcraft-<ver>-windows-x86-portable.zip` |
| <img src="https://raw.githubusercontent.com/storytold/craft-anything/main/assets/app-icon/hicolor/64x64/apps/ai.storyteller.craft-anything.png" alt="" width="32" height="32"> | **Craft Anything** | See how any software works, then build your own | [GitHub](https://github.com/storytold/craft-anything) | [Website](https://getartcraft.com/apps/craft-anything) |
Please report security problems privately through GitHub:
**[Report a vulnerability](https://github.com/storytold/wordcraft/security/advisories/new)**
(Security tab › Advisories › Report a vulnerability).
Don't open a public issue or pull request for a vulnerability until a fix is released.
Useful to include:
- the WordCraft version or commit, and the platform (macOS, Windows, Linux, BSD, web);
- what an attacker can do, and what they need (a crafted document, MCP or control-channel access, a local account…);
- steps or a sample file that reproduce it.
We'll acknowledge the report, keep you updated while we work on a fix, and credit you in the advisory unless you'd rather not be named.
## Supported versions
Fixes go into `main` and ship in the next release. Older releases don't get backported fixes.
## Scope
In scope: anything that lets a document, file, command, MCP or control-channel request, or network response read or write files it shouldn't, run code, leak data, or crash WordCraft and lose the user's work.
Crashes from hostile input count, because WordCraft treats every panic as a bug (see [Never crash](AGENTS.md)).
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
