Symbol instances are placed through a transform as images are, so the
Transform effect now moves and copies both (transform_placed), sharing one
copy budget (MAX_COPY_OBJECTS). Copies of either stop before one reaches
past MAX_REACH, as a path's do (distort::within_reach).
Adds end-to-end export tests for a group's image copies in svg and pdf.
While the renderer drew a brushed path on its fast path, it drew the
pieces of brush art with that path still set as the object being
drawn. cached_stroke and fill_path_gradient then kept the outlines and
gradient slices of the pieces' strokes under the brushed path and the
address of each piece's stroke. The entries held the brushed path and
not the pieces, so a piece made later could take the address of an
earlier piece's stroke and be drawn with that piece's outline. The
instances of a symbol and the copies of a live repeat replace each
other's brush art, so it is made again for each of them in every
frame, and every brushed path gets new brush art when the document's
brushes change. In a test, a renderer drawing three instances of a
symbol whose art holds a path brushed with a scatter brush of a
stroked square drew frames that differed from a new renderer's in 316
to 1,140 pixels.
The two caches now keep only the strokes of the object being drawn. With
vectorcraft-cli bench at 2880x1800 on 8 threads, 2,000 instances of a
symbol of eight brushed paths took 203.4 ms a frame on main and 155.9 ms
with this change. 2,000 groups of the same paths, for which main keeps
the brush art and the outlines of its strokes between frames, took 133.7
ms on main and 156.9 ms with this change. The peak working set of a
bench run at 2880x1800 went from 609 MiB to 127 MiB on the instances and
from 331 MiB to 210 MiB on the groups.
Commands that read the selection through edit::selected_roots leave
out an object whose group is also selected (edit::roots_of). Fourteen
places that read `ids` kept an object listed together with its group.
Given ids that list an object and a group that holds it, Make Repeat
failed with "no such object", New Symbol failed or stored the object
twice in the symbol, and object.transform moved it twice (20 pt for a
10 pt move).
These places now pass explicit ids through edit::outermost, which
drops an id whose ancestor is also listed, with the filter that
roots_of runs on the selection (now edit::without_inner). Nothing else
is dropped or replaced: unlike roots_of, it keeps layers and
compound-path members. A list without nesting gives the same result as
before. Commands that take both ids and the selection as listed, such
as paint.setFill without item, are unchanged.
Docs: docs/mcp.md, docs/target-app-parity.md.
Effect › Distort › Glass… offered only its four built-in textures. The
reference app's Texture menu also has Load Texture, which takes an
image file as the glass surface.
The Glass dialog now has a Load Texture… button. It reads a PNG, JPEG,
GIF, WebP, TIFF, BMP, PSD or PSB file within the pixel allowance the
renderer draws images in, and the Texture menu gains Loaded Texture.
The effect stores the image's gray levels in `textureImage` as a
grayscale PNG in base64, so the document saves the texture with the
effect, and copies of the effect carry it. effect.apply and
effect.setParams take `textureImage` as {path}, {name, dataBase64} or
the stored string; any other value is an error.
The texture lies one image pixel per point at Scaling 100%, centered on
the object and repeated. Each pixel's luma is the surface's height,
from 0 for black to 1 pt for white, and a transparent pixel counts as
middle gray. A Glass without `textureImage` draws and saves as before.
Docs: docs/mcp.md (Glass textures), docs/effects-parity.md,
docs/gaps.md, docs/target-app-parity.md.
Unit fields and length strings read a percentage operand as a share of
a value. After * or /, the percentage scales the term before it:
3cm*50% is 1.5 cm and 3cm/50% is 6 cm. After + or -, it adds or takes
away that share of everything before it: 50pt+25% is 62.5 pt and
100pt+20pt-50% is 60 pt. Before this change these expressions read as
nothing, and the field kept its old value.
The parser now splits a sum at its last + or -, so a percentage applies
to the whole sum before it. Text without % gives the same values as
before, apart from float rounding. A percentage on its own (50%) still
reads as nothing, and percent and degree fields still read % as their
suffix.
Command length strings use the same parser: file.new's width and
height, the distance params and the length preferences.
Docs: docs/mcp.md, docs/ui-parity.md, docs/target-app-parity.md.
Exports bake live effects into plain art, and a Transform effect on
type or on its group or layer turned the type into glyph outlines, even
when the effect only moved it or made moved copies. A PDF reader could
not select or search that text.
The export bake now keeps such type as type, moved into each place the
effect puts its outlines. It does this for Transform effects without
scale, rotation, reflection or Random, for type whose characters are in
solid colors without underline or strikethrough, and that has no fills
or strokes of its own, inline graphics or perspective, and when the
copies do not overlap. Type under such an effect on its group or layer
also needs no transparency or effects of its own, and the group or
layer needs no fill, stroke or Pathfinder effect of its own. The export
still outlines other type under geometry effects, and the canvas and
Expand Appearance still draw outlines.
Docs: docs/mcp.md, docs/target-app-parity.md.
A new import fuzz test, pdf_resources_the_reader_cannot_parse_never_panic,
imports a page whose resources hold:
- a value the reader can't parse (/#zz, 12-.5) or one it reads (/Fine)
in the color space dictionary, before a Separation space the page
paints in, and in the font dictionary, before the font of its text;
- a calculator function written as the shading's function, or inside an
array or a dictionary in the page's /Properties: a plain one, one with
Columns 0, one with a huge Columns, or one of 257 MiB of deflated
spaces.
The import must not panic. The file opens with its art, or it is refused
with "would decode to more than 256 MB" when the function is not plain.
With the nesting check, the font scan or the ink scan reading
Dict::entries again, the test fails on a value the reader can't parse.
With the stream check made on the file's objects alone, the test fails
on every function that is not plain: the file opens instead of being
refused.
The calculator helper of pdf_streams_the_reader_would_fail_on_are_refused
is now a function of the file, and the function of spaces is made once.
The PostScript interpreter that reads EPS and PostScript files turned
the samples of a CMYK image into display RGB and stored an RGBA PNG,
so the image lost its ink amounts. The DCTDecode filter decoded a CMYK
JPEG to RGB, so it lost its ink amounts too. The PDF importer keeps
the ink amounts of 8- and 16-bit CMYK images (in a CMYK TIFF, or the
CMYK JPEG itself).
A CMYK image (image or colorimage in DeviceCMYK, CIEBasedDEFG or a
four-component ICCBased space) now keeps its samples in a CMYK TIFF
(ImageBlob::cmyk_tiff), read through its Decode array, at every bit
depth the interpreter reads. A CMYK JPEG gives its samples as stored,
and the image's Decode array reads them: [1 0 1 0 1 0 1 0] undoes the
inverted samples of Adobe's CMYK JPEGs. The pixels that a MaskColor
or an ImageType 3 mask hides become a grayscale opacity mask over the
image, as in PDF import. A mask that hides nothing adds no mask. Gray,
RGB, indexed and spot color images and image masks stay RGBA PNGs.
Docs: docs/file-format-parity.md, docs/target-app-parity.md.
The editing data reader sized each row of a 1-bit image as width ×
channels bits, padded to a whole byte, but read one bit per pixel and
made the pixel gray from it. A 1-bit RGB or CMYK image came out as a
black and white image of the wrong bits. When that made the layers
differ from the page by more than 5%, the file opened from its PDF
part instead, with a warning.
The reader now takes channel c of pixel x from bit x × channels + c of
the row, a set bit being the channel at full strength, and converts
the samples as it converts 8-bit ones. 1-bit gray images read as
before.
When a graphics driver crashed the process while the window started,
as Intel's Direct3D 12 driver (igd12umd64.dll) did on an Intel UHD
Graphics 605 (#2243), the next start picked the same adapter again. The
restart without a failing adapter and the first-frame watch run inside
the process, so the crash ended them along with it.
Each start now writes graphics-start.json in the log folder before the
graphics start, adds the adapter once one is picked, and clears both
when the first frame reaches the screen or the app ends without
crashing. A start that finds an earlier start still recorded there
leaves that adapter out, as a restart does, logs it and shows a note in
the status bar. When the crash came while the adapters were being
listed (wgpu's Direct3D 12 backend creates a device on each GPU to list
it), the next starts list OpenGL's adapters alone, except on macOS. The
adapters stay left out until the app version or the Graphics Processor
preference changes, a start shows its first frame on one, or no adapter
is left. WGPU_BACKEND and WGPU_ADAPTER_NAME choose regardless of the
record.
Docs: docs/development.md, docs/target-app-parity.md.
A PDF, PDF-compatible .ai or .ait opened from its pages had an empty
File Info. Nothing read the file's document information
dictionary or its XMP packet, so file.info reported no author,
description or keywords, even for a PDF that VectorCraft exported.
vectorcraft_pdf::file_info reads both. The author, description,
keywords, copyright status, notice and URL and the created and modified
dates come from the XMP packet (dc:creator, dc:description, dc:subject
or pdf:Keywords, xmpRights:Marked, dc:rights, xmpRights:WebStatement,
xmp:CreateDate, xmp:ModifyDate), else from the dictionary's Author,
Subject, Keywords, CreationDate and ModDate. document.open,
file.newFromTemplate and file.revert put each value through file.info's
checks and leave out a value that file.info refuses. A packet that is
not well-formed XML leaves the dictionary's values. File Info does not
set the title, and a file restored from the document it carries keeps
that document's File Info. vectorcraft-pdf depends on roxmltree 0.21,
which usvg already brings into Cargo.lock.
Docs: docs/mcp.md (File Info), docs/file-format-parity.md,
docs/target-app-parity.md.
When type had used a font, removing the font while the app ran left
it in the font menus, and the type kept drawing in it until the app
restarted. The font list is the loaded faces plus the scanned catalog,
and a scan replaced the catalog but kept every loaded face.
A scan now drops each loaded face whose file it did not catalog, with
the face's cached outlines. A family with no face left leaves the font
lists, and type set in it lays out in the fallback font and is
reported missing, as when a document opens without the font. When the
font is installed again, the next scan lists it and the type draws in
it again. Bundled fonts and fonts added as bytes have no file and
stay.
Docs: docs/mcp.md, docs/target-app-parity.md.
Adds a Finnish (Suomi, `fi`) catalog with 4,770 entries, written in
sentence case from the English labels with ordinary Finnish
vector-illustration vocabulary. It covers menus, `tl!` literals and the
668 `@msg` status and error messages: `fi` is in KEEPS_MENU_NAMES and
COMPLETE_MESSAGES. Like the other complete catalogs, it leaves the
product, workspace and perspective preset names in English.
Plurals are one/other with the partitive singular after any number but
1 (1 taso, 2 tasoa). Any fi-* locale selects Finnish; sv-FI does not.
Tests: `cargo test -p vectorcraft-ui-egui --lib i18n` passes (47),
including the new finnish_reads_as_finnish and the bundled-font glyph
check.
Clean-room, AI-assisted (Claude Code) translation; a native speaker
checked it in the running app, but it has not been proofread line by
line.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Adds Swedish (Svenska) as an interface language: 4770 strings, written from the English source.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Play an action on every file in a folder or every data set, with destination
and Override Open/Save/Export. Actions panel and File › Automate › Batch…
open the dialog; new strings in pt-br.
Co-authored-by: Cursor <cursoragent@cursor.com>
VariableKind::Graph binds a graph root; dataset rows supply CSV as graph.setData.
Make Graph Dynamic, Variables dialog, capture/apply, and pt-br for the new strings.
Co-authored-by: Cursor <cursoragent@cursor.com>
Load and save variable datasets as CSV for data-merge pipelines, and
translate the new Variables panel commands in Brazilian Portuguese.
Co-authored-by: Cursor <cursoragent@cursor.com>
# Conflicts:
# docs/target-app-parity.md
Store the registration point with the symbol and place instances so that point lands on (x, y). Symbol Options exposes the same 9-point control as Transform.
Co-authored-by: Cursor <cursoragent@cursor.com>
Expose existing Warp styles, orientation and percentage controls through the shared live effect dialog while preserving preview history and effect targets. Keep ordinary Enter owned by focused non-searchable combo controls.
Co-authored-by: Codex <noreply@openai.com>
assets.export of abutting fills must leave no ghost edge (#983 / #1037); panel thumbnails use the same Art Optimized supersample. Progress docs mark the gap closed.
Keep surviving drawable runs separate when Delete or Backspace removes an open-path anchor. Preserve appearance, selection and one-step Undo.
Co-authored-by: Codex <noreply@openai.com>
Make and Edit choose the Intertwine tool: hovering highlights the overlap
area under the pointer, a click swaps which object is on top there, and a
path drawn around overlaps (Shift: a rectangle) arranges every overlap
inside it; Esc or Enter goes back to the tool chosen before. The overlap
faces move to vectorcraft-tools, shared by the tool and the command.
Clicks inside a raised area pick the member drawn on top there, the
Object menu gets the Intertwine submenu, and the new labels and the
predicate message are translated in the complete catalogs. docs/gaps.md
records what landed under G13.
An Intertwine group keeps its objects as they are, in their own stacking
order; each member can be drawn over the others in an area of its own.
The group draws, hits, saves and exports through its live expansion, so the
members stay editable and Release gives them back unchanged.
object.intertwine.arrange picks an overlap area by a click point or by a
closed path drawn around overlaps and toggles which member is on top
there, or brings a member to the front or sends it to the back where three
or more objects overlap.
A step whose id is draw_path or draw_shape runs that tool with its params,
checked as tools/call checks arguments; its result is the tool's, so later
steps can use "$N.id". The reply lists the ids the drawing steps made
under created. The unknown-argument check is shared with tools/call.
The drawing tools style the object they draw in the same call: dash, cap
and join go to the stroke.set that strokeWidth already sends, opacity and
name to object.setProps, and effects are applied in order as apply_effect
does. The options are checked (effect ids against effect.list) before
anything is drawn, so a bad one leaves no half-styled object behind.
Guillem Hermida