While the center was dragged out, the rays pointed at the pointer, as a
polygon's first corner does, and Shift put them back in their original
orientation. In the reference app they turn by a step for each update
of the drag as the pointer moves up or down, and Shift stops the turn
where it is.
Each update of the center drag in which the pointer's document y grows
now adds 0.1 radian (about 5.73°) to the rays' turn, one in which it
falls takes 0.1 radian away, and one at the same y leaves the turn as
it is. Shift held keeps the turn, and turning goes on from there once
Shift is let go. Space held moves the flare without turning the rays.
General › Constrain Angle no longer sets the turn under Shift.
Docs: docs/mcp.md, docs/target-app-parity.md.
The release that places the rings' end point applied the pointer's last
movement to the end point only, so with Space held the flare changed
shape instead of moving. The release now moves the center by that
movement as well. The progress doc says how Shift and General >
Constrain Angle set the rays' orientation.
The reference app's Flare tool rotates the rays as the center is dragged
out, Shift constrains them to their original orientation, and Space
held moves the shape being drawn. VectorCraft's Flare tool drew the
rays in one fixed orientation and ignored Shift and Space.
shape.flare takes rotation (degrees, clockwise), which turns the rays
about the center and leaves the halo, the center and the rings as they
are. While the center is dragged out, the rays turn with the pointer,
as a polygon's first corner does, and a drag straight up leaves them
unturned. Shift keeps them unturned, or turned by General › Constrain
Angle as a polygon drawn with Shift is. Space held during the center
drag or the drag that places the rings' end point moves the flare at
its current size, and the drag goes on from there when Space is let
go, as with the shape tools.
Docs: docs/mcp.md, docs/target-app-parity.md.
In typography and Illustrator, Shift+Enter inserts a soft return (forced
line break) rather than ending the paragraph. Text wraps to the next line
without applying paragraph-level spacing (space before/after, first-line
indents), list continuation lines keep their parent item without repeating
markers, and justified text does not stretch lines ending with a soft return.
- Forward active modifier keys for Enter in ui-egui shortcuts so the tool
detects Shift+Enter.
- Type tool inserts U+2028 (LINE SEPARATOR) on Shift+Enter.
- Text shaping and layout treat U+2028 as an invisible zero-advance control
character, breaking the line in point and area type.
- Paragraph spacing and list markers apply once per paragraph as intended.
Preview, Embed ICC Profiles, Create PDF-Compatible File and the other VectorCraft Options went back to their defaults for every document not saved yet. A native Save or Save As now records the options it used in the preferences (not the artboards it picked, nor Use Compression, which its preference decides), and file.formatOptions offers them for a document not yet saved as a native file. A document saved before keeps its own.
While an opacity mask is edited the Layers panel lists only the mask, so a new layer was added where no row showed it, and only the panel's layer count went up. Both commands are now disabled then, as isolation commands already are (outside_mask_editing).
With a layer selected, Object > Hide > Unselected Artwork hid every object
on that layer, since the selected layer was dropped from the objects to
keep. The objects of a selected layer now count as selected.
While Lock Guides is on, a group that held a guide path was hidden whole,
which hid the guide with it. Guide paths now count as selected, so the
command keeps such a group visible and hides its other members one by one.
CodeRabbit follow-up for #4293. Add 2026-10-26 revision-history rows and
status-line updates for EPS Save and Save As in file-format-parity, gaps
(G9), roadmap and target-app-parity; move the completed EPS Save note in
roadmap's M4 row out of "Left:". Save-back is recorded as done; G9 import
fidelity and Illustrator editing-data writing (#868) are unchanged. Scores
and estimates unchanged. Docs only.
File > Document Color Mode and document.open {colorMode} converted the
colors of the layers, symbols, pattern tiles and swatches only. Graph
designs, graphic styles, the art of opacity masks, the tile that
pattern editing's Cancel puts back and the art of brushes kept their
old color model (only a tint of a global swatch in a graphic style or
a mask followed the swatch), so a CMYK document could still apply,
place or print RGB colors from them.
These now convert with the rest, in the same undo step: their solid
colors, gradient stops, text runs and mesh points, nested masks
included. A Hue Shift brush's key color takes the converted color of
the art color it matches, a tint of a global swatch included. The
brush library is stored again only when one of its colors changed. A
tint of a global swatch in any of these places becomes the converted
swatch's color at its tint, as in the layers. The reply's changed
count covers the colors of the layers, symbols, graph designs, pattern
tiles and opacity masks; the colors of graphic styles and brushes
convert without being counted.
Docs: docs/mcp.md, docs/target-app-parity.md.
While an opacity mask or a pattern was edited, a Shaper double-click
selected a Shaper Group's original shape without isolating the group's
original shapes. A Selection tool press on that shape then selected and
moved the whole Shaper Group over the art the group shows, and started
a marquee over a part of the shape the group does not show.
A press on the selected original shape now holds it for a move, and
the pointer shows the move cursor over it.
While an opacity mask or a pattern was edited, a Shaper scribble and
Object › Shaper › Release and Expand ended isolation, and a Shaper
double-click on a Shaper Group isolated the group's original shapes.
Each replaced the editing layer's isolation while the document stayed
in mask or pattern editing. A click on the Shaper Group's mode widget
did the same through object.isolate.
A scribble, Release and Expand now keep the editing layer isolated in
these modes, and end isolation as before outside them. A double-click
with Shaper selects the original shape under the pointer without
isolating the group's original shapes, and the mode widget does not
show while a mask or a pattern is edited.
Docs: docs/shaper.md, docs/target-app-parity.md.
object.isolate's errors "type objects can't be isolated", "the object
is hidden or locked" and "missing id" had no row in any catalog, so the
status bar showed them in English in every language. The same was true
of layer.target's "the object is outside the isolated group", the other
isolation-mode error in the commands.
Each of the four messages now has an @msg row in every catalog that
translates all status and error messages and in Bulgarian, Danish,
Indonesian and Dutch. layer.target also gives "the object is hidden or
locked", and several other commands that take an id also give "missing
id", so the same rows translate those errors.
Docs: docs/target-app-parity.md.
The Live Paint Selection tool acted only on the press, so a drag
selected at most the one face or edge under the pointer. The reference
app selects every face and edge a marquee touches, partly enclosed ones
included, and a Shift-drag adds them to the selection or removes them.
A drag of 3 pixels or more now draws a marquee. On release, select.set
selects the faces and edges it touches, or select.none runs when it
touches none. With Shift held at the press, select.toggle runs with
what it touches, and nothing runs when it touches none. A face that holds the whole marquee counts. Select Fills off
leaves faces out, and Select Strokes off leaves edges out.
A click now changes the selection on release instead of on the press,
so Escape between the press and the release, which also removes the
marquee, leaves the selection as it was. The tool no longer highlights
or selects the faces and edges of a Live Paint group that is locked, on
a locked layer or on a locked artboard, or that is outside the isolated
art in isolation mode.
Docs: docs/mcp.md, docs/target-app-parity.md.
Pattern Brush Options has a menu below the Outer Corner Tile and the Inner
Corner Tile. Each can be the brush's own corner art (Original), None, or one
of four tiles made from the side tile at each corner of the path:
- Auto-Centered stretches one side tile around the corner, centered on it.
- Auto-Between bends a side tile on each side into the corner, the two
meeting on the corner's diagonal.
- Auto-Sliced lays a side tile on each side past the corner and masks it
at the diagonal, so the two meet like a mitered frame.
- Auto-Overlap lays a side tile on each side past the corner, overlapping.
The tiles are straight at the corner and follow the path towards the side
tiles, so they meet a curve that runs into the corner. A side tile taller
than the corner can reach is stretched along until the two sides meet. On a
short path, a corner's tile is squeezed along so that it covers at most the
path up to an open path's end and half way to the next corner, and its two sides still meet on the
corner's diagonal.
The definition stores the choice as `outer_source` and `inner_source`
(`none`, `autoCentered`, `autoBetween`, `autoSliced`, `autoOverlap`), which
`brush.options` sets. Corner art wins over a source. A brush saved without
a source draws as before: a kind of corner without art takes the other
kind's art. None leaves that kind of corner empty.
Docs: docs/mcp.md, docs/target-app-parity.md.
After a click picked the first object with the Blend tool, Escape did
nothing: the pick stayed, and the next click on another object blended
the two. After a blend was made, Escape did not stop the next click
adding to it either.
Escape now drops the object picked first and stops the next click
adding to the blend just made, as a click on empty canvas does, so the
next click picks a new first object. The document and the selection
stay as they are, and no undo step is added.
Docs: docs/mcp.md, docs/target-app-parity.md.
Enter Isolation Mode worked while an opacity mask was edited, and Edit
Opacity Mask and View Opacity Mask worked in isolation mode, so each
mode replaced the other's isolated art. In the reference app, isolation
mode can't be entered while a mask is edited, and mask editing can't be
entered in isolation mode.
object.isolate and perspective.editText, which shows type in isolation
mode, are now off while an opacity mask is edited, and a call returns
an error that ends "stop editing the opacity mask first". In isolation
mode transparency.editOpacityMask and transparency.viewOpacityMask are
off, and transparency.makeOpacityMask refuses one target, an object or
a layer, which it would take into mask editing; a call returns an error
that ends "exit isolation mode first". Make Opacity Mask with two
objects still masks one with the other. Pattern editing mode does not
count as isolation mode for these commands.
Object > Perspective > Edit Text, the canvas context menu and the
Transparency panel's menu and Make Mask button follow the commands'
enablement. A click or Alt-click on the mask thumbnail in isolation
mode shows the error and does not edit the mask. While a mask is
edited, the Contextual Task Bar leaves out Isolate, and the Properties
panel's Quick Actions leave out Isolate Group.
Docs: docs/mcp.md, docs/target-app-parity.md.
The chips drew the first selected object's fill and stroke. They now show
the paints the Fill and Stroke proxies show, a group's painted art
included, and a "?" when the selected objects' paints differ. A click on
either chip shows the Swatches panel through `window.panel.activate`, so
it also appears when the panel is floating, closed or in an expanded dock
column; an open flyout stays open. The progress doc describes the
reference app's bar in its own words.
The task bar's Fill chip had no Stroke counterpart. A Stroke chip now sits
beside it, drawn as a ring with the selected object's stroke paint, as the
Control bar's Stroke chip is. A click on it brings the Stroke proxy forward
and opens the Swatches panel, as a click on the Fill chip does for the
Fill proxy. The chip is left out with the Artboard tool, as Fill is.
The bar's width estimate, which centers the bar under the selection, grows
by the chip's width. The drag test's first square moves 20 pt right so its
bar still starts inside the canvas.
Escape during a Selection tool move or Alt-drag copy, a bounding-box
scale or rotation, a marquee, or a drag of a corner widget, a pie widget
or the brackets of type on a path did nothing, and the release then
applied the drag. Only a ruler guide, mirror axis or grid repeat drag
and the loaded text took Escape.
Escape in any of these drags now cancels it, the way Direct Selection
cancels its drags: the art returns to its state at the press, an
Alt-drag leaves no copy, no undo step is added, and the release does
nothing.
Outside a drag Escape works as before.
Docs: docs/mcp.md, docs/target-app-parity.md.
With View › Snap to Glyph and Smart Guides on, a point drawn near a single
line of live type now also lands on the anchor points of its glyphs and lines
up with its x-height (raised or lowered by Baseline Shift) and with the edges
of each character's advance width along the baseline (proximity guides). In
rotated type the baseline, x-height and proximity guides run at the type's
angle, and type of one glyph also has angular guides along the glyph's slanted
straight segments; a segment that Shift keeps to its angle slides onto them.
A paragraph shows glyph bounds only, so its baselines are no longer guides.
FontFace::x_height gives a face's x-height in font units.
Envelope Options stored Anti-Alias and Preserve Shape Using, but nothing that
draws an image read them: a distorted image was always smoothed and always
cut into clip groups.
- With Anti-Alias off, each piece of a distorted image is marked pixelated
(saved as `pixelated`). The renderer draws it with nearest-neighbor
sampling and without mips, SVG export writes `image-rendering: pixelated`,
and PDF export writes it without /Interpolate.
- With Preserve Shape Using Transparency, each piece is the image with a
white opacity mask in the piece's shape instead of a clip group. The
renderer paints an image whose mask is one plain white path straight into
that path, as it does for an image in a clip group, when the path lies
inside the image's frame.
Docs: docs/mcp.md, docs/target-app-parity.md.
The reference app keeps the inner radius of a star constant when Ctrl
or Command is held after the drag starts. VectorCraft's Star tool took
the held radius from the first drag event that carried the key, using
that event's outer radius. The canvas sends a drag only once the
pointer moves, so a key pressed with the pointer still scaled the
inner radius with the next move before holding it.
Ctrl/Cmd now holds the inner radius the star showed at the last drag
position before the key went down, with Alt's straight shoulders when
Alt was held. A new press and Escape clear the held radius. Before,
after a drag canceled with Escape, the next star took the canceled
star's inner radius when Ctrl/Cmd went down before that star's first
drag event.
Docs: docs/target-app-parity.md.
Escape did not cancel a drag with the Anchor Point, Mesh, Shape Builder
and Measure tools, or a Direct Selection drag of a mesh point, a corner
widget or the brackets of type on a path: the drag went on until the
mouse was released. Escape cancels every other Direct Selection drag
and a drag with the Free Transform, Rotate, Reflect, Scale, Shear and
Gradient tools.
Escape now cancels an Anchor Point drag, a Mesh tool drag of a mesh
point or handle, and a Direct Selection drag of a mesh point or handle,
a corner widget or the brackets of type on a path. The art goes back to
how the press found it, no undo step is added, and the rest of the drag
and the release send nothing. Escape during a Shape Builder drag ends
it, so the release merges and deletes nothing; the tool takes Escape
only during the drag. Escape during a Measure tool drag ends it and
brings back the measurement shown before the press. Escape after an
Anchor Point or Direct Selection press that has not moved yet drops the
press. Otherwise, outside a drag, Escape does what it did before.
Docs: docs/mcp.md, docs/target-app-parity.md.
Edit › Keyboard Shortcuts listed every engine command with a menu path,
whatever its params. A shortcut runs a command with no params, so a key
given to File › Document Setup › Units ran document.setUnits with {}
and failed with "unknown units".
The dialog and shortcuts.list now leave out a command with a menu path
and no default shortcut when no item of the menu bar runs it without
params, it opens no dialog when run without them, and its params doc
names a required field. This leaves out 38 commands, among them the
Graphic Styles, Swatches and character and paragraph style commands
that take a name. A command whose shortcut the user has changed is
still listed, where the key can be changed or cleared, and a saved key
still runs and conflicts as before. Every command with a default
shortcut stays listed.
Docs: docs/mcp.md, docs/target-app-parity.md.
dotCooCoo