Transparency: isolation mode and opacity mask editing can't be entered from each other

Enter Isolation Mode worked while an opacity mask was edited, and Edit
Opacity Mask and View Opacity Mask worked in isolation mode, so each
mode replaced the other's isolated art. In the reference app, isolation
mode can't be entered while a mask is edited, and mask editing can't be
entered in isolation mode.

object.isolate and perspective.editText, which shows type in isolation
mode, are now off while an opacity mask is edited, and a call returns
an error that ends "stop editing the opacity mask first". In isolation
mode transparency.editOpacityMask and transparency.viewOpacityMask are
off, and transparency.makeOpacityMask refuses one target, an object or
a layer, which it would take into mask editing; a call returns an error
that ends "exit isolation mode first". Make Opacity Mask with two
objects still masks one with the other. Pattern editing mode does not
count as isolation mode for these commands.

Object > Perspective > Edit Text, the canvas context menu and the
Transparency panel's menu and Make Mask button follow the commands'
enablement. A click or Alt-click on the mask thumbnail in isolation
mode shows the error and does not edit the mask. While a mask is
edited, the Contextual Task Bar leaves out Isolate, and the Properties
panel's Quick Actions leave out Isolate Group.

Docs: docs/mcp.md, docs/target-app-parity.md.

docs/mcp.md

@@ -1262,6 +1262,12 @@ then composite against the art below it). SVG has no non-isolated groups, so the
 mask is edited; called again it shows the artwork, still editing. It is view state of the open document: the canvas
 (and `ui.screenshot`) shows it, exports never do, and it ends when mask editing ends.
 
+Isolation mode and mask editing exclude each other. In isolation mode `transparency.editOpacityMask` and
+`transparency.viewOpacityMask` are off, and `transparency.makeOpacityMask` refuses one target, an object or a layer,
+which it would take into mask editing; a call returns an error that ends "exit isolation mode first". While a mask is edited,
+`object.isolate` and `perspective.editText` are off, and a call returns an error that ends "stop editing the opacity
+mask first". Pattern editing mode does not count as isolation mode here.
+
 `view.transparencyGrid {on?}` (View → Show Transparency Grid; default: toggle) is view state of each open document,
 like the mask view: the grid shows behind the artboards of the documents that turn it on, on the canvas and in
 `ui.screenshot`, never in exports. It returns `{on}`, isn't undoable and doesn't mark the document changed.

docs/target-app-parity.md

@@ -823,6 +823,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
   The Tabs panel menu's Clear All Tabs (`text.tabs.clear`), Delete Tab and Repeat Tab (`text.tabs.set`) can be chosen while the panel's ruler shows tab stops. Delete Tab removes the stop selected on the ruler. Repeat Tab replaces the stops after the selected stop with up to 20 copies of it. The copies are spaced by the selected stop's distance from the stop before it, or from the paragraph's left indent when it is the first stop, and no copy is placed at 2,000 pt or beyond. Clear All Tabs removes every stop, so the default stops every ½ inch apply again.
 - **Interface languages, vertical type:** Preferences ▸ User Interface (or VectorCraft ▸ Language on macOS) picks Automatic (the system locale) or a registered language, persisted as `interfaceLanguage`. Translations come from per-language catalogs (`i18n/*.tsv`): Traditional and Simplified Chinese, Japanese, German (every `de-*` locale), Spanish (neutral international Spanish, for every `es-*` locale), French (every `fr-*` locale), Italian (every `it-*` locale) Russian (every `ru-*` locale) and Ukrainian (every `uk-*` locale) cover the whole interface, Czech every menu label; Czech, German, Greek, Spanish, French, Hungarian, Italian, Japanese, Korean, Vietnamese, Polish, Brazilian Portuguese, Russian, Simplified Chinese, Traditional Chinese, Swedish, Ukrainian and Finnish also translate status-bar and error messages as they are shown (`@msg` templates, every message literal tested; the messages themselves stay English for agents); untranslated text stays English. Japanese and Chinese glyphs come from the craft-fonts build input (release builds) or the installed fonts, Czech, German, Spanish, French, Italian, Russian and Ukrainian ones from the bundled UI fonts. The web app follows the browser's languages (or `?lang=`). The Basic toolbar's Type button holds Vertical Type in its flyout. Vertical Type, Vertical Area Type and Vertical Type on a Path create vertical text (columns right to left, upright CJK glyphs and marks with `vert` alternates, Latin and longer numbers on their side, two- and three-digit numbers set as tate-chu-yoko in one em of the column (kept whole when justified), upright glyphs centred on the column (tracked or justified too), point type's anchor on the first column's centre line); kinsoku applies to horizontal and vertical Japanese (Paragraph panel › Kinsoku Set, `text.setFormat {kinsoku}`: Hard, the default, keeps closing marks, iteration marks, the prolonged sound mark and small kana off the line start and opening brackets off its end; Soft lets 々, ー and small kana start a line as JLREQ's level 3 rules do; None turns it off), and justified Japanese lines spread their room between characters (not inside Latin words); Paragraph panel › Mojikumi Set (shown with Preferences › Type › Show East Asian Options, `text.setFormat {mojikumi}`): None or Line-end Punctuation Half Width (new type's default, as in Illustrator; older documents and imported text keep None) shares one half-em space between consecutive punctuation, sets a closing mark ending a line half width and an opening bracket starting a line flush with its start (a paragraph's first line at its first-line indent, JIS X 4051's principle in JLREQ 3.1.5), and puts a quarter em between Japanese and Latin letters or digits; Paragraph panel menu › Top-to-Top / Bottom-to-Bottom Leading measures leading from em box top to top (area type's first line touches the frame) or from baseline to baseline (new type in a Japanese interface starts top to top, with em box centre character alignment, #432); Paragraph panel menu › Burasagari None / Regular / Force (`text.setFormat {burasagari: "none"|"standard"|"forced"}`) hangs an East Asian comma or full stop (、。，．､｡) ending an area type line outside it, Regular (new type's default) when it doesn't fit and Force always (the rest of the line then fills the measure; closing brackets and Latin punctuation don't hang); Character panel menu › Character Alignment (with the East Asian options; `text.setFormat` or `text.setRangeStyle {charAlign}`) lines characters smaller than the largest on their line up on the Roman baseline, the em box top/right, centre or bottom/left, or the ICF (ideographic character face) top/right or bottom/left, from the font's BASE table or, without one, the average ink box of some ideographs and kana; Proportional Metrics (the same menu; `{proportionalMetrics}`) sets full-width glyphs on the font's proportional widths (OpenType `palt`) in horizontal type and upright glyphs on its proportional heights (`vpal`, shaped top to bottom; fonts without vertical metrics keep their cells) in vertical type, and Line-end Punctuation Half Width takes nothing more off the punctuation they re-spaced; Type ▸ Type Orientation switches existing text; caret, selection, hit testing and arrow keys follow the writing direction. Vertical text exports to PDF as real text and to SVG as outlines. The interface is available in Polish (`pl`): menus, panels, dialogs and messages, with one/few/many plurals; AI-drafted, native review pending (#1498).
 - **Transparency:** opacity masks (clip/invert/disable/link), exported as SVG `<mask>` and PDF soft masks. The constant alpha soft mask that PDF and `.ai` export draw a CMYK page with transparency through is white, so applications that read every soft mask by its luminosity show the page too (#1359, part of #1286).
+  Isolation mode and opacity mask editing exclude each other ([transparency and blending modes](https://web.archive.org/web/20230102045151/https://helpx.adobe.com/illustrator/using/transparency-blending-modes.html)): in isolation mode a click or Alt-click on the mask thumbnail does not edit the mask, and Make Mask is off for one object; while a mask is edited, Enter Isolation Mode and Object › Perspective › Edit Text are off, the Contextual Task Bar leaves out Isolate, and Quick Actions leave out Isolate Group.
   Disable, Enable, Unlink and Link Opacity Mask and Opacity Mask Options (`transparency.setOpacityMask`) record no undo step when every mask they act on already has the flags they set.
 - **Image Trace, thin closed outlines:** generated `fit::snap_area_tests` verify nonzero interiors after straightening, opposite closed-boundary winding and Noise controls; see [quality notes](image-trace-quality.md#thin-closed-outlines-with-snap-curves-to-lines). Scores and hours unchanged; open-piece fitting is unchanged.
 - **Image Trace, Document Library color groups:** with Document Swatches, the panel's Colors menu and `"colorGroup"` trace with one color group's colors instead of every swatch, as the public panel documentation describes Document Library; code-drawn tests in `crates/engine` and the panel.