WordCraft chose a substitute for a font that isn't installed from its
name alone, so an unknown brand font always came out sans. Word reads the
font table instead: measured with the same missing font, it draws it in
Cambria when w:family is roman and in Calibri when it is swiss or auto.
A report whose font table calls its brand font roman got a sans footer
where Word draws serif.
The font table's roman fonts are read into the settings, and layout looks
a missing one up as Cambria (Caladea where Cambria isn't installed). The
other classes keep the existing substitutes, which already start with
Calibri's metric clone.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
space after and the second's space before, as Word does by default. Word
adds them instead when the document's compatibility options include
w:doNotUseHTMLParagraphAutoSpacing. Measured in Word with five paragraphs
of 12 pt before and after: 24 pt between them with the option, 12 pt
without, the same in compatibility modes 14 and 15. A 60-page report with
the option lost 6 pt per paragraph, about 60 pt on its cover.
The option is read, laid out in the body and in boxes, and saved back.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
A header or footer a section inherits (Same as Previous) keeps the
percentage widths of its tables relative to the section that defines it.
Measured in Word: a 100%-wide footer table defined by a portrait section
stays 451 pt wide, centred, on landscape pages that inherit it, and spans
the landscape width only when that section names the footer itself.
Paragraph alignment in the same footer follows the landscape page.
Found on a report whose landscape calculation pages drew their footer
table full width where Word draws it at the portrait width.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Layout: an empty section mark stays on a full page
An empty paragraph that carries a section break, when the next section
starts on a new page, needs no room of its own in Word. Measured: 50 lines
filling a page, then that paragraph, then the next section makes two pages
in Word; WordCraft made three, the middle one blank. A plain empty
paragraph in the same place still moves on, in both.
Found after a landscape drawing page in a 60-page report.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Layout: drop an unneeded mut in the section mark test
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Tables: a row with less room than its minimum height moves on whole
Measured in Word with about 49 pt left on a page: a table row of eight
lines splits there, but the same row with an at-least height of 63.6 pt
goes to the next page whole, and so does one holding a nested table.
Without the height both split, as before. WordCraft split them all, so a
report's title row (a logo beside a small nested table) started at the
foot of its cover page.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tables: preserve splitting for oversized minimum-height rows
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Tables: text running past an exact-height row is cut off
A row with an exact height (w:trHeight w:hRule="exact") keeps that
height whatever its cells hold. Word cuts the text that doesn't fit at
the cell's edge; WordCraft drew it over the rows below, so a certificate's
identification block came out as overlapping lines.
The cell is marked as clipped in layout (Placed::Cell clip), and display
draws its lines inside that cell's clip, on screen and in PDF. Hit
testing is unchanged: the lines stay where they are in the layout.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tables: keep row clipping compatible with Rust 1.90
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
A heading whose text opens with a page break had its list number drawn on
the line holding the break, so the number stood alone at the bottom of one
page and the heading text started the next. Word draws the number with the
text. The label now goes on the first line after a leading break.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Word writes the next heading's TOC bookmark start into the paragraph that
ends with a page break. The line after the break then held that marker,
so it wasn't the empty mark kept with the break (#932): it went onto the
next page with the paragraph's spacing and pushed the heading 17 pt down.
Lines holding only zero-width markers (InlineObject::is_marker) now count
as empty there.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
A paragraph holding only a page break keeps its mark on the page before
(#932), but its space after still went onto the new page, so a heading
with page break before no longer stood at the top and broke again: a
blank page. The space after now stays with the mark. A next-page section
break carried by such a paragraph also started a second page; the empty
page the break started is now used instead.
Found on a 60-page inspection report: two blank pages Word doesn't have.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
DrawingML's rtTriangle was read as an isosceles triangle, so a cover
page's white corner cut-outs pointed up into a peak instead of cutting a
V into the picture above them. It is now its own shape kind, drawn with
the right angle at the bottom left, wrapped and glued along that outline,
and saved back as rtTriangle. The .doc reader maps msosptRightTriangle (6)
to it too.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Engine: the Word 2003 format check reads through io, so commands still never touch files themselves
is_word_2003_file (#1081) opened the file with std::fs, which the file-access guard test
(commands_do_not_touch_the_file_system_themselves) forbids outside io.rs; main failed it.
A new io::read_file_head reads the first bytes inside the read root.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* UI: a chrome click counts the page as focused at once, so the next keystroke isn't dropped; the ribbon-focus test passes again
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix: DOCのDIB画像変換でバイト上限を守る
* Drop the duplicate read_file_head left by the merge with main
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Dmitrii Khlapov <19991457+dkhlapov@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: haranishi <223786623+haranishi@users.noreply.github.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Italian proofing: po', qual è, È and un/un' grammar rules; more elisions in spelling
- grammar (works without a dictionary): un pò / un po -> un po'; qual'è -> qual è;
E' -> È; un'altro -> un altro and un altra -> un'altra (also nessun, ciascun,
qualcun, alcun), gender from the ending with masculine -ista/-ma/-cida... left alone;
more emphatic doubles allowed (pian piano, poco poco, così così...)
- spelling: more elisions (dov'è, cos'è, anch'io, senz'altro, nessun'altra, n'ha...),
truncations po'/mo'/be' accepted, pò and qual'è left to grammar (no double marks)
- tests: rule tests, grammar proptests, Italian suggestion proptest, It in mixed-span proptest
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Contributors: credit lupant by their GitHub profile name
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Save got focus only when nothing else had it, but the page keeps focus while typing and claims Tab and the arrow keys, so the prompt opened without a focused button and the keys moved the caret behind it. Save now takes the focus whenever none of the prompt's buttons has it.
Co-authored-by: Brandon Thomas <echelon@gmail.com>
w:pgNumType w:start="0" was read but laid out as 1: the page counter
was set to one less than the restart and could not go below zero. A
report numbering its cover 0 read "Page 2" on the page Word calls 1.
The restart is now the next page's number itself.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Layout: a table's percentage width past 100% is kept
Word keeps a preferred width over 100% of the text column (w:tblW
w:type="pct" above 5000). A cover-page footer table at 131% with the
left margin as a negative indent spans the page edge to edge in Word;
WordCraft capped it at 100%, so it ended three-quarters of the way across.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Contributors: add Fin Warman
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
russianLower/russianUpper showed 1), 2), 3). They now follow Word's 29-letter sequence (no ё, й, ъ or ь; ы kept), then repeat the letter (аа, бб, ааа), as observed black-box in Word.
Co-authored-by: Brandon Thomas <echelon@gmail.com>
With room for two of its three lines at the bottom of a page, a paragraph was
split two and one, leaving a widow; taking a line along would leave an orphan,
so Word moves the paragraph whole. A paragraph continued from the page before
may still take one line along from two (no orphan there).
Co-authored-by: przemek-arch <263159043+przemek-arch@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
On macOS five of Word for Mac's default shortcuts were missing or unreachable:
- Cmd+Shift+S is Save As (it opened Apply Styles, which keeps Ctrl+Shift+S
on Windows and Linux).
- Cmd+Option+E inserts an endnote. macOS takes Cmd+Option+D to show and
hide the Dock, so the old key never reached the app.
- Cmd+Option+A adds a comment (Cmd+Option+M still works).
- Control+H opens Find and Replace (Cmd+H still works).
- Cmd+Option+R collapses or expands the ribbon (ui.collapseRibbon).
Keys on Windows, Linux and the web are unchanged. Tests pin the bindings
on each platform.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* contributors: add Nael-Nathanael
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* insert.picture and insert.icon leave the caret after the picture (#965)
A script that typed right after inserting a picture replaced it, so the
picture was missing from the saved file. Commands now leave the caret
after the new picture; Picture Format commands still act on it. The app
still selects a picture the user inserts, as in Word.
Fixes#965
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Select a pasted picture again, keep pictures inserted in a row (#965)
Desktop paste inserts through execute, so after the caret change it
left a pasted picture unselected. WordApp::select_inserted_picture
selects the picture just before the caret; run and the paste path call
it, paste once after the last picture so a multi-file paste keeps them
all. Tests for paste selection and for two inserts in a row.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Crop handles: Picture Format › Crop crop mode on the canvas, picture.crop takes the new size
ui.crop toggles crop mode for the selected (unturned) picture: black crop
handles trim a side or two, keeping the scale and the visible part in place;
the cropped-away part shows dimmed; Esc, Enter, a click outside or Crop again
keep the crop. A drop is one picture.crop with width/height, one undo step;
a floating picture moves by what a left/top crop trims.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Crop handles: flipped pictures trim the side under the handle, stale drags drop unapplied
Review round 1: the crop maths, the dimmed preview and the floating
position shift map the on-screen side to the source side (flip H swaps
left/right, flip V top/bottom). A drag remembers its picture and is
dropped unapplied if that picture is no longer the one in crop mode.
Sizes stay within 1-4000 pt at the same scale. Pointer-path tests drive
a real handle drag and a click outside. The dim is darker, and the
canvas keeps following a crop drag's pointer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Docs after rebasing on main
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Crop handles: ui-parity row merged with main; #1242's Cell Size note moved to the Tables row
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Dmitrii Khlapov <19991457+dkhlapov@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* DOCX: draw VML preset shapes such as Word's right arrow (#1377)
A VML v:shape that takes its geometry from a preset shapetype
(type="#_x0000_t13", o:spt) was dropped on import. Its preset number now
comes from the shape's o:spt, its v:shapetype, or Word's _x0000_tNN id,
and the presets whose geometry matches a DrawingML preset WordCraft draws
are read with their fill, outline and size (paint left out by the shape
comes from its shapetype): rectangle, rounded rectangle, ellipse,
diamond, isosceles triangle, five-point star, right arrow, line and
straight connector, heart, text box, and the flowchart process, decision
and connector. Saving writes them as DrawingML presets. Text in a preset
keeps the shape around it. MSOSPT numbers from [MS-ODRAW] 2.4.24.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* DOCX: draw unmatched VML presets as their nearest shape (#1377)
VML preset numbers now map to the DrawingML preset of the same shape and
go through preset_kind, so a preset WordCraft has no shape for (left, up
and down arrows, right triangle, callouts, four-point star...) is drawn
as the nearest one, as DrawingML presets are, instead of being left out.
The exact mappings are unchanged. WordArt text shapes, picture frames
without a picture and non-primitive shapes are still not drawn.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* #1376: a word too wide for the strip beside a floating object moves on whole
Text in the narrow strip beside a square-wrapped picture was split mid-word
("docu" | "mentazione") when the strip was wider than the 20pt minimum but
narrower than the word. A span narrowed by a floating object is now used only
if the line's first word fits it; otherwise the word tries the row's next span,
or goes below the object. A word wider than the whole line still breaks in
place, and the 20pt minimum measured for floating tables is unchanged.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* #1376: a line after a skipped strip starts its row; word width skips hyphenation points
A line placed in a row's second span after the first was skipped was marked as
beside a line before it, so line numbering and pagination treated it as the
second half of a row. The word measured against the full line now runs to the
next real break, not the first hyphenation point, and a row with nothing on it
jumps below an object that actually crosses the column.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* wordcraft --control checks its port (#1426)
--control took whatever followed it as the port and dropped it when it
didn't parse, so `--control --sample` lost --sample, `--control abc`
started without the control channel, and a bad value cleared
WORDCRAFT_CONTROL_PORT. A flag after --control is now left for the loop,
and a missing, non-numeric, zero or out-of-range port prints an error
naming it and exits with status 2, after the loop so --version still wins.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* wordcraft --control names any negative number it rejects (#1426)
A value after --control counts as the port when it starts with a digit
or a minus and a digit, so a negative too long for i64 is named in the
error instead of left in the file list. NonZeroU16 replaces the
separate zero check.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Over differently formatted paragraphs the dialog showed the caret
paragraph's values and OK gave them to every selected paragraph, through
para.rtl/ltr, para.align and para.set (three undo steps). It now reads
every selected paragraph: a field they share shows as before, a field
they differ in shows blank (number boxes empty, alignment empty, check
boxes neither on nor off, no direction picked) and OK leaves it as each
paragraph has it until the user sets it. OK sends only the fields that
changed, as a single para.set.
para.set takes "onPage": alignment and indents as seen on the page,
which each paragraph turns into its own start and end once `props` is
applied, so mixed directions get the right sides in one command. The
line spacing and space boxes no longer pull an out-of-range value from
the document (line spacing 6) into their range, which counted as an
edit.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Insert › Link › Place in This Document: link.targets, links to bookmarks, headings and the top (#1234)
* Insert Hyperlink: Link to › Place in This Document (#1234)
The Insert Hyperlink dialog gets Word's "Link to:" choice. Place in This Document
lists the top of the document, its headings (indented by level) and its
bookmarks, and links to the chosen one; the text to display follows the choice
until it is typed over. It uses insert.link with `top`, `heading` or `bookmark`
and link.targets for the list.
* Docs: update the progress docs for this change
* Docs: put the new sentence in the WordCraft / evidence column
* i18n: Insert Hyperlink link-target strings in every catalog
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* #1290: read Word's VML text watermark from DOCX headers
Word's Design › Watermark is a VML shape with a v:textpath in the headers.
The reader dropped it, so screen and PDF showed no watermark. It now maps
it to the document's watermark model (text, font, fill colour,
semitransparent from v:fill opacity, diagonal when turned), which the
renderers already draw. Only Word's watermark shape (PowerPlusWaterMarkObject
id) or text centred on the page both ways counts; other header WordArt,
body WordArt and shapes inside text boxes are left alone. Writing it back
to DOCX is still missing (it was already lost on save).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #1290: write the watermark to DOCX as a VML text shape in the headers
The DOCX writer dropped settings.watermark, so a watermark read from Word
(or set in WordCraft) was lost on save. Every header part now starts its
first paragraph with a VML shape (ECMA-376 Part 4) whose v:textpath carries
the text, font, fill colour, semitransparency (v:fill opacity) and diagonal
turn, centred on the margins behind the text, with the reader's
PowerPlusWaterMarkObject id so it reads back as the watermark, not a shape.
The shape type is our own: a straight path the text follows, fitted to the
box. Slots the pages show with no header of their own or linked from an
earlier section (default; first page with a title page; even pages with
even/odd headers) get a header holding only the watermark; linked sections
stay linked. A blank watermark isn't written. Check Compatibility no longer
warns about watermarks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #1290: give the watermark's text path a top and a bottom edge so Word draws it
With a single line as the shape type's path, Word loaded the watermark as
WordArt (right text, size and turn) but drew nothing. Checked black-box in
Word: diagonal, horizontal and header-less documents now show it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #1290: test the watermark through a Word-shaped file, table-only and even-page headers
Read → write → read of a file with Word's watermark keeps the watermark, the
headers' text and paragraphs and one shape per header; header WordArt that
isn't a watermark doesn't become one. A header holding only a table gains no
line; with odd and even pages an even header is added and later sections
stay linked.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* DOCX: read VML freeforms (v:shape with a path) as freeform shapes
Legacy VML shapes with their own `path` (ECMA-376 Part 4), such as rule
lines in headers, were dropped on open and lost on save. They are now
read as freeforms: m/t/l/r/c/v/x/e commands in the coordsize/coordorigin
space, nf/ns, v:fill and v:stroke opacity; arcs drawn straight, formula
references read as 0. Saved as DrawingML custom geometry.
Tests: header rule read and round-tripped; hostile paths and coordinate
spaces stay finite and never panic.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* DOCX: VML freeforms whose path uses formulas aren't drawn
Formulas (@n, from v:formulas) aren't evaluated; reading them as 0 drew stray lines. Parity row states the fill-opacity limit (none at 0, otherwise opaque, as for DrawingML fills).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* DOCX: VML freeforms reuse the watermark's vml_fraction
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #1290: move the VML freeform reader out of this PR
The three VML freeform commits (b7a6cc7, d8fa665, 945cbb4) aren't part of
#1290; they go to their own pull request so this one stays on the
watermark.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
A picture with Wrap Text > Behind Text could not be dragged where it overlapped text, in the body or in a header/footer. Pressing it did nothing; once it was selected some other way (Selection Pane, arrow keys) the arrow keys moved it, but the mouse never started a drag. Reported from the field (#82).
Root cause: the hit test deliberately lets body text win over an object behind it (crates/layout/src/hit.rs: 'objects behind the text only where there's no text'), so objects::pointer never began a frame drag.
Fix: grab_at/pointer now treat a Behind Text picture, shape or group as a drag candidate even where text covers it, in body and header/footer stories. The press does not take the gesture at once: it becomes an object drag only after the pointer passes the drag threshold (pending_behind), so a plain click still places the text caret in the overlapping text. Text boxes are unchanged (their inside is their text; only their border grabs them).
Verified with three egui_kittest UI tests driving real pointer events, plus a headless ui_shot run against the real app:
- floating_picture_can_be_dragged_in_front_of_or_behind_text
- floating_header_picture_can_be_dragged_in_front_of_or_behind_text
- behind_picture_dragged_over_text_without_being_selected_first
Full wordcraft-ui-egui suite: 365 passed.
Docs: ROADMAP progress log and revision, docs/ui-parity.md, docs/gaps.md (#3).
Co-authored-by: Muthiullah Hib <thye911@mail.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* #1077: forms protection fills content controls (w:edit="forms")
* #1077: forms walk stays conservative for unclosed control markers
* #1077: forms protection edges — nested locks, orphan markers, tables, empty interiors
* #1077: forms protection — formFields state and Find Next Region over fillable controls
* #1077: forms protection round-trip, password guard, docs
* #1077: final review fixes — lock-param gate, per-list pairing, docs, pane perf
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Layout: inside/outside floats swap sides on even pages; Page Setup shows mirror margins (#1181)
Floats aligned inside or outside, or placed relative to the inside or
outside margin, were always put as on an odd page, so shapes Word puts
in a book's outside margin all came out on the right. They now follow
the page they're on (ECMA-376 ST_AlignH, ST_RelFromH): on an even page
the inside is the right side. Floating tables (w:tblpXSpec) too.
With mirrored margins, even pages are laid out as odd ones and then
shifted; float positions now allow for that shift, so floats placed
from the page edge stay put (the "known limit" in #452) and the left
and right margin areas are each page's own.
Mirrored margins read from a file were invisible in the UI: the Margins
menu ticks Mirrored when they're on, and Page Setup gets a Mirror
margins check box (labelling the margins Inside and Outside), applied
through a new `mirror` param of layout.margins.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* i18n: Mirror margins in every catalog
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: lloyd <lloyd@stackworx.io>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Insert › Bookmark: Delete and Go To, laid out as Word's (#1236)
The Bookmark dialog had only Add: a bookmark could not be deleted, and a
click in its list jumped to the bookmark at once. It is now laid out as
Word's (observed in Word 2019 on Windows): the name box over the list, Add,
Delete and Go To beside them, Sort by Name or Location and Hidden bookmarks
below. A click in the list picks a name; Add (Enter) adds and closes; Delete
and Go To leave the dialog open, and after a delete Cancel reads Close. The
dialog opens on the bookmark around the caret, and Add is off for a name
the command would refuse.
insert.deleteBookmark {name} removes a bookmark's start and end wherever
they are, also across paragraphs, as one undo step, keeping the selection
on its text; from the command search without a name it opens the dialog.
Adding a bookmark under a name in use goes through the same removal: it
looked for the old end only in the start's paragraph, so a bookmark across
paragraphs left a stray end behind. edit.goto with a bookmark selects its
text, as Word's Go To does, instead of placing the caret at its start.
Closes#1236
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Insert › Bookmark: Ctrl+click on a link to a bookmark keeps a caret (#1236)
Word's Go To selects a bookmark's text, but Ctrl+click on a link to a
bookmark only puts the caret at the bookmark's start (checked in Word 2019
on Windows). Following a link runs edit.goto, which now selects, so it
collapses the selection to its start.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Resolve the doc conflict markers left by the previous merge
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Table Layout: the Cell Size boxes apply to the whole selection (#1242)
table.rowHeight and table.columnWidth read the caret's cell only. With the whole
table selected the caret is in the last cell, so only the last row's height and
the last column's width changed.
Both now use the cells the selection covers (selected_cells): every selected
row gets the height and every grid column the selected cells touch gets the
width, as one edit. Without a selection that spans cells they still change the
caret's row and column.
* Docs: update the progress docs for this change
* Docs: put the new sentence in the WordCraft / evidence column
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
eframe shrinks the start size to the monitor's, but not by the frame, the
title bar or the taskbar, and Windows places a new window away from the
screen's corner. On a laptop screen the first window's bottom, with the end
of the scroll bar, sat under the taskbar or past the screen's edge, so a
drag of the scroll bar stopped where the pointer met the edge. The window
was saved that size and opened so again on every launch.
On the frame that first knows the monitor, a window that doesn't fit with
48 pt to spare on each side (WindowGeometry::fit_on_monitor) gets a smaller
size, never below the minimum, and is centred. A window the system placed
counts its position too; a restored one, maybe on another monitor, only its
size. Maximized, full-screen and minimized windows are left alone. Checked
on Windows with no saved settings: the window now opens wholly on screen.
Closes#1215
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Windows Magnifier keeps the text cursor in view through UI Automation: the
caret's own box has no width, so it takes the box of the character after
the caret, and when that has none either, of the two characters before it.
The canvas described a line's end mark (the paragraph mark, a line break)
with no width, so on the empty line Enter or Shift+Enter makes Magnifier
looked at the end of the line above and stayed there until two more
letters were typed.
A line's end mark now takes the room a selection shows a paragraph mark
with: PARA_MARK_WIDTH (5 pt, now shared with selection_rects) at the line's
visual end (Line::mark_box). Checked live with Windows Magnifier, its view
read with MagGetFullscreenTransform: after Enter and Shift+Enter it moves
to the new line at once.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Right-click on a table of contents entry offers Update Field (part of #1197)
* Test: the TOC context menu check allows more than one Paste item
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Table Design and Table Layout were in the keytip tab list inside a table but had no letter, so no badge showed and no key reached them. They now take Word's two-letter badges, JT and JL: J waits for the second letter and narrows the tab badges to the J ones, then the tab's control badges show as on any other tab.
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* M10: retain local crash recovery on current main
* i18n: Backstage Recover in every catalog
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Russian proofing: spelling, suggestions, grammar and word division
Runs tagged ru get Russian tools instead of none:
- spelling against an installed ru_RU Hunspell dictionary (not bundled;
LibreOffice dict-ru folders searched; KOI8-R and Windows-1251 decoded),
with ё optional, hyphenated words and solid compounds understood, не with
adjectives, participles and verbal nouns, prefixed verbs, abbreviations
with endings and camel case left alone, plus our supplement of modern
words with their declensions (assets/spelling/ru-extra.txt);
- suggestions tuned for Russian: е/ё, letter groups, common confusions,
missing spaces, typos and a stem scan;
- grammar rules with Russian messages (repeated words, spaces, sentence
capitals with Russian abbreviations, likely missing commas before
clause openers, doubled punctuation);
- Russian word division from the spelling rules, written as code.
* Options: Russian in the dictionaries list (ProofLang::Ru arm)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Магда М.Г. <mail@mgmagda.ru>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
docbin decrypts XOR-obfuscated, RC4 and RC4 CryptoAPI files after verifying the
password against the stored verifier; the engine reuses the .docx password
prompt errors. Written from [MS-DOC] and [MS-OFFCRYPTO]; synthetic tests only.
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* #778: .xls and legacy-encoding recipient lists; filter and sort recipients
- Recipient lists: legacy Excel 97-2003 .xls (BIFF8 reader on the cfb crate already in the
tree); Excel 5.0/95 and password-protected .xls refused with a clear message; a CSV named
.xls reads as text, an HTML one gets an error. .xls added to the picker filters (desktop,
web, built-in browser) and drop handling.
- Text lists (and plain-text import) detect legacy encodings when not UTF-8/UTF-16: GBK/GB18030,
Big5, Shift_JIS, EUC-KR, Windows code pages (encoding_rs + chardetng, MIT/Apache); an
`encoding` param overrides.
- mailings.filterRecipients / mailings.sortRecipients: field, comparison (equal, notEqual,
less, greater, lessOrEqual, greaterOrEqual, blank, notBlank, contains, notContains), value,
And/Or joins; sort keys. Preview, Finish & Merge and labels use only the matching records
in sort order. Edit Recipient List edits every record and keeps the filter.
- Recipient List dialog: Filter and Sort section and a merge-order column; catalog rows;
strings in every catalog; docs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* i18n: Hungarian and French strings for this change
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Review fixes for #885: total order for recipient sort, Bulgarian strings
- compare_cells now ranks numbers (compared numerically) before text (compared
case-insensitively), so it is a total order; a column mixing 9, 10 and 1a
could make slice::sort_by panic. Regression test sorts mixed columns.
- Bulgarian catalog: the 24 Filter and Sort strings.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* vi: mail merge Filter and Sort strings
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Dmitrii Khlapov <19991457+dkhlapov@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* #775: STYLEREF fields in headers and footers show each page's result
Running headers/footers with STYLEREF (e.g. the current chapter title) are
evaluated per page at layout time (ECMA-376 §17.16.5.59): the page's first
paragraph of the style (\l: last), else the nearest before, else after.
Style names/ids, heading levels (STYLEREF 1), character styles, and the
\n \r \w \s \t \p switches. Body STYLEREF fields update with the other
fields. STYLEREF added to Insert › Quick Parts › Field with its options.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #775: STYLEREF error text in our own words
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Review fixes for #882: translate the STYLEREF Field dialog strings
Adds the style picker label, the six STYLEREF switch labels and the
STYLEREF description to all 18 interface catalogs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* STYLEREF: reuse the style index while the body and styles are unchanged
Headers with STYLEREF rebuilt and hashed the body's style index on every
layout pass (echelon's follow-up note on #882). The layout cache now keeps
the index with the body blocks it came from (shared, so an edited block is
a different pointer) and the styles/numbering hash, and rebuilds it only
when either changed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* vi: STYLEREF field strings
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Dmitrii Khlapov <19991457+dkhlapov@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
