On Linux under X11, and under XWayland, winit 0.30 hands a drawing
tablet's pen to the window as a mouse without its pressure. Every pen
stroke reached the tools at full pressure: a Calligraphic brush with
Size on Pressure drew one width, and the Liquify tools' Use Pressure
Pen applied full intensity.
When the window is on X11, the desktop app now reads XInput2 raw
events on a second X connection (x11rb's RustConnection, without
unsafe). A device with an "Abs Pressure" valuator is a pen, unless
its XInput type is TOUCHPAD or TOUCHSCREEN. Its pressure, scaled from
the valuator's range to 0..1, goes into Services::stylus, and another
pointer moving clears it. The canvas uses that pressure when a frame
has no touch force. A press takes the highest pressure of the pen's
latest touch since the canvas last read the feed, and waits up to
5 ms for the touch of a hovering pen. The moves and the release of a
held press keep the pressure the pen last touched with when its lift
has already arrived. Native Wayland is unchanged.
The valuator mapping and the reader come from PhotoCraft's tablet
crate (storytold/photocraft#255), with the pressure axis only.
Docs: README.md, docs/development.md, docs/hardware-parity.md,
docs/target-app-parity.md.
- Strokes set to None no longer import as black 1px strokes.
- Underline and strikethrough are kept.
- Frame text starts at cap height; lines hanging out of a frame make it taller;
mixed-alignment artistic text lines up within its longest line; line breaks
inside a paragraph get no paragraph spacing.
- Table cell text taller than its cell is centred and stays visible.
- Outline effects on stroked shapes are drawn around the stroke.
- CMYK pixel layers go through the document's embedded CMYK profile; without
one, opaque layers stay CMYK.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Squashed from #2533 onto #2525 (Smudge Stick, Sponge, Watercolor): both sets in PIXEL_EFFECTS (45), the catalogs and the docs, whose counts now read 45/57.
On a Wayland session a drawing tablet's pen could not draw or click:
winit 0.30 does not bind the Wayland tablet protocol, and neither KWin
(since Plasma 6.3) nor GNOME's Mutter turns tablet input into pointer
input. Linux Display Server's X11 (XWayland) choice let the pen work as
a mouse, but it opened the window through XWayland on every start, also
without a tablet.
Linux Display Server has a third choice, X11 (XWayland) When a Pen Is
Attached (x11WithPen). It opens the window through XWayland on a
Wayland session only when /proc/bus/input/devices lists a pen as the
app starts: a device with the BTN_TOOL_PEN key and the ABS_X and ABS_Y
axes, the check PhotoCraft's tablet.rs makes. Automatic stays the
default. On Linux the Performance page shows a note for tablet pens
that don't draw.
README.md named KDE alone; the KWin commit's message says Mutter does
not emulate tablet events either, so README.md and docs/development.md
now name GNOME. The Pen pressure row of docs/hardware-parity.md said
Linux has pressure through XWayland; winit 0.30 reports none on X11
either.
Docs: README.md, docs/development.md, docs/hardware-parity.md,
docs/target-app-parity.md.
Three original Artistic filters on the pixel pipeline, each with a
catalogue row, the generic live dialog, translations and tests.
- Cutout: colours softened by Edge Simplicity (less with Edge Fidelity),
split into Number of Levels steps per channel and painted as flat
pieces in their average colour; slivers along softened edges take the
nearest large piece's colour.
- Poster Edges: channels posterized to Posterization + 2 levels, black
lines on the edges of any channel and of the outline, widened by Edge
Thickness and darkened by Edge Intensity.
- Neon Glow: dimmed greys screened with a glow colour from the light
areas (positive Glow Size) or the dark ones (negative), as strong as
Glow Brightness.
All keep coverage and work in document units at any Document Raster
Effects resolution. Photoshop filters 33/57; cargo xtask ci passes all
9 steps.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Seven app screenshots retaken at 2240x1400 (UI at 1.6x), two of them new: a 3D still life with the Revolve dialog (examples/still-life.vectorcraft) and a bracket drawing with linked dimensions (examples/bracket-drawing.vectorcraft). The still life also joins Made in VectorCraft. The older examples are saved again in the current native format; they render the same.
Adds a Finnish (Suomi, `fi`) catalog with 4,770 entries, written in
sentence case from the English labels with ordinary Finnish
vector-illustration vocabulary. It covers menus, `tl!` literals and the
668 `@msg` status and error messages: `fi` is in KEEPS_MENU_NAMES and
COMPLETE_MESSAGES. Like the other complete catalogs, it leaves the
product, workspace and perspective preset names in English.
Plurals are one/other with the partitive singular after any number but
1 (1 taso, 2 tasoa). Any fi-* locale selects Finnish; sv-FI does not.
Tests: `cargo test -p vectorcraft-ui-egui --lib i18n` passes (47),
including the new finnish_reads_as_finnish and the bundled-font glyph
check.
Clean-room, AI-assisted (Claude Code) translation; a native speaker
checked it in the running app, but it has not been proofread line by
line.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Adds Swedish (Svenska) as an interface language: 4770 strings, written from the English source.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Legacy .ai Options dialog gains Hidden Objects (Hidden Layer, Omit, Make Visible) and Text
(Editable, Outlines), translated in every catalog. Docs: type and hidden objects in the legacy
.ai paragraphs, the restored revision rows and roadmap row.
Complete Polish catalog (4,492 rows): every menu string, tl! literal,
plural and status/error message, enforced by the existing completeness
tests (complete_menus, KEEPS_MENU_NAMES, COMPLETE_MESSAGES).
- pl.tsv: clean-room translation from the English meaning, following
common Polish desktop-software conventions (obszar kompozycji for
artboard, obszar roboczy for workspace, obrys, wypełnienie, próbki…)
- plural_polish: one / few (2–4, not 12–14) / many (0, 5–21, 25…)
- every pl-* locale (pl-PL, pl_PL.UTF-8) resolves to it
- tests: Polish plural forms, vocabulary, nested message translation;
Polish letters in the bundled-font coverage test
- docs: README, development.md, localization-parity.md
Drafted with AI assistance; native review welcome.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DukHNvUY45rjRnvtz91x33
Add a Korean catalog (crates/ui-egui/src/i18n/ko.tsv, 4,151 rows) covering
every menu string, every tl! literal and the status and error messages, and
register `ko` in i18n::LANGUAGES (plural_none; every ko-* locale resolves).
- tests: korean_reads_as_korean, ko locale tags, ko in KEEPS_MENU_NAMES and
COMPLETE_MESSAGES; is_cjk covers Hangul so the bundled-font glyph check
leaves Hangul to installed fonts, as it does CJK without craft-fonts.
- Hangul is drawn with an installed system font on the desktop; the web
build still needs a Korean UI face in craft-fonts.
- docs: localization-parity (Korean row, 12-language score 54% -> 63%,
60-100 h), ROADMAP, README, development.md, gaps.md G16,
target-app-parity.
Clean-room: written from the meaning of the English strings in ordinary
Korean vocabulary; no other product's Korean localisation was used.
AI-drafted; native-speaker review welcome.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Add the Hungarian catalog (4,524 rows): every menu string, every `tl!`
literal, the contextual and `@id` rows, the plurals and the status and
error messages, written from the meaning of the English labels in
general Hungarian vector-illustration vocabulary. Conventions are in the
header of `hu.tsv`.
- Register `hu` ("Magyar") in `i18n::LANGUAGES` as a complete language
with `plural_none` (a count takes the singular); every `hu-*` locale
resolves to it.
- Tests: Hungarian joins the menu-label, menu-string, `tl!`-literal and
message coverage checks; `hungarian_reads_as_hungarian` pins the core
vocabulary, the plural, the `file.close` override and a nested
message; ő ű Ő Ű are checked in the bundled UI fonts.
- README, ROADMAP, docs/development.md and docs/localization-parity.md
list Hungarian.
Add deterministic document-space grain, highlight controls and a live
dialog with preview, cancel, undo and appearance editing. Preserve
coverage, support existing native and raster export paths, translate
new labels and update parity documentation.
Validate the tonal curve, stationarity, subpixel strength, zoom filtering
and tile seams. Full cargo xtask ci passes all seven gates.
winit 0.30 delivers no file drops on native Wayland. The new Linux Display
Server preference (Automatic / X11 (XWayland), shown on Linux only, read at
startup) has winit open the window on X11 when the session is Wayland,
DISPLAY is set and the X11 libraries winit loads are installed (ldconfig
check ported from PhotoCraft); otherwise the window opens on Wayland and
the log says why. README, development notes, parity docs, ROADMAP and the
complete catalogs updated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Eight raster effects on the pixel-filter pipeline
(vectorcraft_effects::pixel::brushstrokes), under a new Effect › Brush
Strokes submenu between Blur and Distort in the Raster Effects section:
- Accented Edges (edgeWidth pt 1..14, default 2; edgeBrightness 0..50,
38; smoothness 1..15, 5): the edges of the softened object painted
towards white chalk at high brightness or black ink at low brightness;
Smoothness also leaves the faint edges out. The shape stays as it was.
- Angled Strokes (directionBalance 0..100, 50; strokeLength pt 3..50, 15;
sharpness 0..10, 3): light areas in right diagonal strokes, dark areas
in left diagonal ones; 0 makes every stroke a left diagonal, 100 every
stroke a right diagonal. Sharpness brings detail and bristles back.
- Crosshatch (strokeLength pt 3..50, 9; sharpness 0..20, 6; strength
1..3, 1): the detail kept under pencil hatching along both diagonals,
Strength passes of it, the edges roughened.
- Dark Strokes (balance 0..10, 5; blackIntensity 0..10, 6;
whiteIntensity 0..10, 2): short strokes towards black in the dark
areas, long strokes towards white in the light areas.
- Ink Outlines (strokeLength pt 1..50, 4; darkIntensity 0..50, 20;
lightIntensity 0..50, 10): black outlines over the edges, ink hatching
in the shadows, shadows darkened and highlights lightened.
- Spatter (sprayRadius pt 0..25, 10; smoothness 1..15, 5): each pixel
shifted by noise up to 0.4 x the radius; Smoothness makes the grains
larger and smoother.
- Sprayed Strokes (strokeLength pt 0..20, 12; sprayRadius pt 0..25, 7;
strokeDirection Right Diagonal, Horizontal, Left Diagonal or Vertical):
strokes along the direction, scattered by up to 0.3 x the radius.
- Sumi-e (strokeWidth pt 3..15, 10; strokePressure 0..15, 2; contrast
0..40, 16): wet strokes, ink bleeding from the darks along paper
fibres, more ink with pressure and an S-curve contrast for rich blacks.
It works in value only: hues and saturation stay, and so does the
object's shape (no fringe in the transparency).
A stroke averages the colour along a segment through the pixel (16
samples at most, the art softened first when they lie more than a pixel
apart); strokes lie in rows around the object's centre, each row
starting at random and each stroke shifted along itself, with streaked
noise for the bristles. Everything is in document space, so the effects
look the same at any zoom or resolution, move with the object and draw
the same every time; outsets and reaches are exact. On a 2000 x 2000
raster in release the slowest settings take 0.3-2.0 s (Crosshatch at
50 pt with 3 passes the most).
Shared helpers instead of copies: edges::sobel (Glowing Edges now uses
it, unchanged), distort::displace and texture::Tones are pub(super).
Catalogue rows with parameter docs, menu entries, Sprayed Strokes'
direction dropdown, translations (de, es, fr, it, ja, ru, uk, zh-hans,
zh-hant; menu labels in cs and pt-br), tests (parameters and clamping,
outsets and reaches, each filter and option showing, chalk and ink on
the edges only, shadows and rich blacks, Sumi-e keeping the shape and
hues, hatching keeping the tone, strokes smearing along their direction,
Spatter's radius, resolution and move invariance, canvas, multithreaded,
PDF and SVG, the command sweep with junk parameters, the menu) and
ROADMAP.
Behaviour from public documentation only:
https://helpx.adobe.com/photoshop-elements/using/brush-stroke-filters.htmlhttps://www.computerhope.com/jargon/p/photoshop-sprayed-strokes.htm
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Progress docs per craftrules standards/progress-docs.md: target-app parity, gaps, roadmap with alpha gate, readiness by audience (full / mainstream / essentials) with Opus 5.5 hours, and feature, format, hardware, UI and localization parity docs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Revolve dialog and gizmo strings in German (the catalog landed after
this branch was written), with Kreiseln and Aussehen umwandeln as the
catalog already names them. Intensity, which main's Texture filters
added meanwhile, is kept once per catalog. README's missing list says
what 3D still lacks beyond the initial Revolve.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Review of #761 turned up three real defects and a feature that was visible
but not usable. All of it is fixed here, each defect with a regression test
that fails without the fix.
- A binding outlived the object it named. Deleting art left its entry in
`variables.bindings` forever: it counted as a skip in every dataset
application, `variable.list` counted it, and the saved file grew with every
delete. `Document::prune_variable_bindings` now lets them go after each
edit, as `prune_assets` does for Asset Export's.
- `Variables::prune` cleared `active_dataset` by comparing it against the
*variable* names being deleted. A dataset named like a variable lost its
active state when the variable went. The two are separate namespaces; the
block is gone (dataset.delete already did it right).
- `variable.delete` reported the number of names asked for, not the number
deleted, so deleting a name that was not there still said `deleted: 1`.
- `dataset.set` (new): a dataset's values could only be set when it was
created, so changing one meant deleting and rebuilding the row — losing its
place in the list and the active one. This replaces the row's values and
reports what it dropped.
- Window › Variables, and dialogs for the "…" commands. Every command had an
empty menu path and the command palette runs those with `{}`, so nothing
could be defined from the UI at all. The commands now carry their menu
path, the "…" ones open a Variables dialog (a name and a kind; a name and a
field per variable, its kind's editor), and `dataset.set` opens with the
row's own values.
- Locked art is neither bound nor rewritten by a dataset, and says so.
- `set_plain_text` told a node that existed but was not type that it was
missing.
- The panel had Document Info's icon, so the two were indistinguishable in
the collapsed column; it gets its own, plus New/Delete buttons, and its
rows say what their count is.
Format round trips now cover variables (the testkit fixture defines both
kinds, binds them and applies a row), and ROADMAP/README no longer list the
feature as missing.
cargo xtask ci: all 7 steps pass.
Add the German catalog: every menu string, every `tl!` literal, the plural
forms and the status and error messages (3,818 rows), written from the meaning
of the English labels in the vocabulary German-speaking users of vector
illustration software know (Zeichenfläche, Farbfelder, Kontur, Fläche, Pfad,
Ankerpunkt, Ebene, Verlauf, Deckkraft). Conventions are in the header of
`de.tsv`.
- Register `de` ("Deutsch") in `i18n::LANGUAGES` as a complete language; every
`de-*` locale (`de-DE`, `de-AT`, `de-CH` …) resolves to it.
- Tests: German joins the menu-label, menu-string, `tl!`-literal and message
coverage checks; `german_reads_as_german` pins the core vocabulary, the
plurals, a nested message, the joined "…format" style names and the theme
context ("Erscheinungsbild" vs the Appearance panel's "Aussehen"); ä ö Ä Ö ß
are checked in the bundled UI fonts. The "unsupported locale" cases use
Dutch now that German is supported.
- README, ROADMAP and docs/development.md list German.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
vectorcraft-cli mcp and vectorcraft --control take the flags PhotoCraft
takes. While roots are in force, every path a command reads (open, place,
relink, SVG image links, library and profile loads, plug-ins, preset
imports, font searches) must lie inside the read root and every path it
writes (save, export, package, Export for Screens and for Web, print to
file, captures, library saves) inside the write root. Paths are made
absolute, links are followed (a missing file's nearest folder's), and the
result is compared by whole components, ignoring case on Windows; `..`
below a missing folder, dangling links and device names are refused. A
root left out grants none of its access; without the flags nothing
changes.
The checks live in one place, vectorcraft_engine::file_access, consulted
by the engine's file helpers and the app's file services. The headless
server confines its whole process; the app confines control requests,
the frames carrying input they inject and the background saves they
start, leaving the person at the keyboard and the app's own folders
alone. The screenshot tool now has the backend write its file.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Conflicts: README and ROADMAP (both sides kept: the French and Russian
interface with the Affinity sentence; the placed-documents bullet with
the Affinity one); place and swatch libraries (upstream's byte sniffing
and comments, with the preview-only refusal kept).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GQPh8UDgMyARR5Hat9UchC
French now sits between Spanish and Italian (es, fr, it, ru): the
plural rule, the LANGUAGES registry entry (so the Language menu lists
Français before Italiano), the locale tests, the fr() helper and
french_reads_as_french. README, ROADMAP and docs/development.md list
the languages in the same order.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Add fr.tsv with the full interface coverage: every menu string, every
tl! literal, the plurals and the status/error messages (@msg).
Registered as complete_menus with the French plural rule (0 and 1 are
singular); every fr-* locale (fr-FR, fr-BE, fr-CA, fr-CH …) resolves
to it. Keeps the product, workspace and perspective preset names in
English like the other complete catalogs.
Tests: french_reads_as_french; fr added to KEEPS_MENU_NAMES and
COMPLETE_MESSAGES; the Latin-script glyph test covers French letters
and the no-break space; locale tests use de-DE as the unsupported case.
Clean-room: written from the meaning of the English labels in the
vocabulary French-speaking users of vector illustration software know
(Plan de travail, Nuancier, Contour, Fond, Tracé, Calque). No other
application's localisation was copied.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
dotCooCoo