The decoder has the same 2^28 cap as decode_jbig2, and can refuse a page first, so the doc says either
error can come. The page at the cap decodes, which the test now asserts, rather than failing later.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AmsdeUCdTaD72jkDw2pJKY
The test said such a page is refused here, as Unsupported. #5491 makes hayro-jbig2 refuse it when
the stream is opened, as Corrupt, so whichever of the two PRs landed second would fail this test.
A page past the cap is refused either way, and that's what the test now says.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AmsdeUCdTaD72jkDw2pJKY
From CodeRabbit's review of the stack:
- Every JBIG2 image read its /JBIG2Globals afresh, within 32 MiB each but with no
bound across an export or a redaction. A globals stream of the file, not edited since
it was read and with its /DecodeParms direct, now has its filters undone once a
document and is kept for the images that share it (in every clone, which share the
file), up to 64 MiB in all. An edited one, one added in memory, or one with
/DecodeParms by reference (another object, which can change under it) is read each
time as before. This saves the filters only: the decoder reads the segments afresh for
every image, so a real symbol dictionary still costs its decoding once an image.
- view.copy-image dropped "JBIG2 inside other filters" from its missing list on the
strength of Export's test; Copy Image now has its own: a JBIG2 picture behind
ASCIIHexDecode is found under the pointer and copied as its pixels and as a PNG, and
one whose page information is in its globals is read through them.
A JBIG2 image's /Width and /Height are read as given directly; one by reference is an
error rather than an image of no rows.
A /JBIG2Globals reference to no object still reads as no globals: it is a reference
to null (ISO 32000-2 §7.3.10), which an entry may hold for being absent (§7.3.7), and
the renderer draws the page so. An image that needed those globals then mostly fails
to decode; in a probe of twelve pictures that decoded with them, eleven were refused
and one decoded to other pixels.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AmsdeUCdTaD72jkDw2pJKY
Part of #283. A scan stored as JBIG2 (as the optimizer writes them) is decoded
through Document::decoded_image_within, its /JBIG2Globals included, and its covered
pixels cleared in a Flate copy that refers to no globals, as CCITT fax images are.
Before, any JBIG2 image under a mark was removed whole, blanking the page.
Still removed whole (fail-closed): a JBIG2 page of another size than the image,
which decoded_image refuses (the renderer draws the whole page into the image, so
the rows cleared wouldn't be the ones shown); globals that can't be read; damaged
data; an image claiming more than one bit or one component, even where its rows
take as many bytes; a page far past the image's raster, refused before it is
decoded.
Globals no other image uses leave the file with the original on the full rewrite
(tested); globals another image still uses stay, and the README and parity note say
they may hold the shapes of marks from under the area, not where they were.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
decode_jbig2 sits next to decode_ccitt, through hayro-jbig2 as Export ▸ Images
used it, and shares CCITT's row sink. The JBIG2 page has to be the image's size:
PdfCraft's renderer draws the whole page into the image (black box: a 4-row page
behind /Height 2 fills the image box with all four rows), so the rows of a taller
page aren't the image's. The decoder decodes a page whole, so the page is checked
before it is decoded: that size, within the caller's bound as rows of one bit, and
at most 2^28 pixels (MAX_JBIG2_PIXELS; the decoder keeps a bit a pixel, about 34 MB
there).
Document::decoded_image_within decodes a JBIG2 image as it does a fax image: the
filters before it undone first, then the decoder with the /JBIG2Globals of the
image's own /DecodeParms entry (/Crypt counts in the position; fax_params and the
globals now share last_filter_parms). Globals have a limit of their own,
MAX_JBIG2_GLOBALS (32 MiB, moved from Export), and globals that can't be read are an
error rather than ignored.
Export ▸ Images reads JBIG2 through it, so its own decoder, row sink and DecodeParms
reader go, and hayro-jbig2 leaves pdfcraft-create. JBIG2 behind another filter now
exports, and so copies (Copy Image uses the same function); a page taller than the
image, which Export cut to the image's rows, now skips the image, as one of another
width did. doc_export_all_images' description no longer lists JBIG2 inside other
filters as skipped.
The optimizer's monochrome step read images through decoded_image_within and
relied on JBIG2 failing there: it now leaves JBIG2 images alone explicitly, as
before (a resampled one would come out Flate under Retain), and the README and
parity note list them as not yet handled.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The integration in #5426 made downsampling conservative: dark_is_one answers only for
DeviceGray and image masks (a decode array of two different numbers or none), and not
under /DefaultGray or /DefaultRGB, and a square of four new pixels that each cover both
samples keeps the image at its resolution. The README, the crate docs, mono()'s comment
and the optimize.downsample-images parity note still said separations and indexed
images were averaged, a tie going to full ink or entry 0.
Measured on main: a 600 ppi page of the ragged-text fixture is no longer averaged
(it is with the square guard switched off), so the docs say so.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Includes #4325#1952#4180#2529#4320#4805, preserving their original histories.
Keep paragraph alignment and hard/soft wrap metadata together; retain CCITT/downsampling/RGB ownership guards with bounded JBIG2 export and exact-copy symbol encoding.
Combined interaction regressions added. Validation pending.
Use a named compact preset arrow beside the field, retain the row alignment/width assertions for the editable control, and open the current colour flyout in the saved-text regression. No accessibility or layout checks are disabled.
Preserve caption editing and current form/Prepare module boundaries. Carry export-only appearance preservation, validation and data round-trip tests to their current paths, and retain current attribution metadata. Hosted CI must validate this refreshed head.
Preserve main's continuous text selection, page tools and module split. Carry only this branch's sidebar-focus feature and regression onto main, without resurrecting old common files from criss-cross merge bases. Hosted CI remains required.
Use the unified Format Text panel and current page-input context instead of restoring old monolithic UI code. Preserve main's pointer routing, editor accessibility and preferences; retain colour, save and input regressions. Hosted CI must validate this refreshed head.
UPDATE_APP (native builds; craft-update is a native-only dependency) carries our 128 px icon and accent (#b70228, its red, from the icon (#5245)). The updater, the self-update
helper and craft-update's startup prompt all get them through crate::UPDATE_APP; the
prompt draws the icon, the accent and "by ArtCraft" (craft-update's default developer).
craft-update is pinned to storytold/craft-libs main at 1065653e7 (#434).
Clippy fixes for Rust 1.99 in untouched code (same logic):
- crates/edit/src/images.rs
- crates/forms/src/appearance.rs
- `zip`: 9.1.0 → 9.1.3
Requirement `roxmltree` 0.20 → 0.21: `ParsingOptions` gained `entity_resolver` (initializers take `..Default::default()`, i.e. none, as before) and is no longer `Copy` (two functions build it with a closure, the pattern merge.rs already used).
AGENTS.md (and CLAUDE.md where present) gets a CI workflows section: workflows only call
craft-common-actions at @main, with no other jobs; feature and fix PRs don't touch CI and
link or open a craft-common-actions issue (a PR only for a small fix that is safe for
every app and does not increase CI time); legacy jobs
aren't added to and move only as their own task, staying until a shared workflow runs them.
windows-arm64.yml moves from its SHA pin to @main. The pinned revision is on
craft-common-actions main and the workflow (and the actions it calls) is identical
there, so nothing changes in behaviour.
Packing makes an RGB image grey for every use at once, but /DefaultGray and
/DefaultRGB were checked only where the walk reads: page content and forms.
An annotation's appearance, a pattern, a Type3 glyph or a soft mask's group
drawing the same image can have other default colour spaces, so its colours
could change there.
The walk now records, by object number, every reference in the resources it
reads (each /XObject entry, drawn or not, an /XObject dictionary under its
resources, resources under a page, page-tree node or form), reading the
resources of every page and of every node above one, each page and node a
root. An image the walk reached stays covered unless an object reachable
from the trailer refers to it, or to an object on its way from a page, other
than through those references, or it is held by one that isn't covered; an
eight-bit DeviceRGB image that isn't covered stays RGB. So resources, an
/XObject dictionary or a form a page shares with an appearance keep it RGB,
as does a reference with another generation, while LibreOffice's layout (one
resources object for a page, its /Pages node, and a form inside it that
names it again) still packs. The scan runs only when packing is on and there
is such an image.
The images drawn or listed where the defaults are in force are kept by
object number too, so one named with another generation there stays RGB.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* packaging: Flatpak finds and prints to CUPS printers
The Print dialog listed no printers in the Flatpak: the runtime has libcups but not
lpstat/lp, the sandbox couldn't reach the CUPS socket, and driverless network printers
(lpstat -e) need Avahi. Bundle lpstat/lp/lpoptions from CUPS 2.4.20 (Apache-2.0,
statically linked, licence installed) and grant --socket=cups and
--system-talk-name=org.freedesktop.Avahi in both manifests.
* packaging: Flatpak reads the user's CUPS settings (~/.cups, read-only)
Review (CodeRabbit): without it the sandbox's lp/lpstat ignore the user's default
printer and saved options (lpoptions) and a print server named in their client.conf.
* packaging: Flatpak CUPS tools reach the host socket when client.conf names a custom path
Review: Flatpak mounts the host's CUPS socket at /var/run/cups/cups.sock whatever
path ~/.cups/client.conf or CUPS_SERVER names, so lp/lpstat/lpoptions now run through
a wrapper that points a socket path missing in the sandbox there. Server names
(remote servers) and sockets that exist are left alone. Tested in the sandbox:
CUPS_SERVER=/run/custom/cups.sock lists the host's printers through the wrapper and
none without it; a host name is passed through unchanged.
* packaging: redirect a custom CUPS socket only when it is the one Flatpak mounted
Review (CodeRabbit): Flatpak picks the socket it mounts at /var/run/cups/cups.sock
with stricter rules than CUPS (flatpak-run-cups.c: a socket CUPS_SERVER, else the
first line spelled exactly "ServerName /path" in ~/.cups/client.conf, else the
default), while CUPS reads the keyword in any case and takes the last ServerName. The
wrapper now redirects only when CUPS' socket is the one Flatpak chose, so a job can't
reach a different server; otherwise CUPS fails on the missing path.
* packaging: never redirect a CUPS_SERVER the sandbox was given
Review (CodeRabbit): Flatpak picks the socket it mounts from the host's CUPS_SERVER,
so one set by flatpak run --env or an override may not be what it mounted. The
wrapper now leaves any CUPS_SERVER alone and redirects only a client.conf socket that
matches Flatpak's choice; otherwise CUPS fails on the missing path instead of
reaching a different server.
* packaging: point CUPS at the mounted socket only when it is the one Flatpak chose, else fail
Review (CodeRabbit): with a custom socket listed first and the default last in
~/.cups/client.conf, Flatpak mounts the custom one at /var/run/cups/cups.sock while
CUPS picks the last line, finds that path, and talks to the custom server. The
wrapper now compares CUPS' socket with Flatpak's choice even when the path exists:
equal, CUPS is pointed at the mount; different, the tool fails with an error instead
of reaching another server.
docs/target-app-parity.md's optimize row lists lossy JBIG2, refinement
coding and a symbol dictionary shared between images as missing, with a
status line and a revision row.
From reviews with the pdfcraft-review skill.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
The optimizer now writes JBIG2 images as a symbol dictionary and text
regions, and Export ▸ Images has to read them back. A page of three
repeated letters, symbol coded (smaller than the generic coding),
exports as its picture. The test is added to create.export-all-images'
parity evidence. Asked for in pre-push review.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
Review of the previous commit:
- Nothing checked the segment numbers the region split assigns: a
mutant numbering every region 2 decoded. The many-marks test now
reads each segment's number, and has a bar too tall to be a symbol,
so the generic region is numbered after the last text region.
- The decoder's 32,767-symbol limit was checked against all distinct
marks, before either plan, so an image with more distinct marks lost
the second plan, which codes only the repeated ones. The limit now
applies to each plan (MAX_CODED_SYMBOLS); finding marks keeps its
memory bound of 65,536 (MAX_SYMBOLS), as before the previous commit.
A test has 32,768 distinct marks above a page of repeated text, which
encode_jbig2 still symbol codes through the second plan.
- The dense-page optimizer test now checks that it takes several text
regions, and a compile-time assert keeps segment numbers within a
byte's reach.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
A review found that a dense page came out as a stream PdfCraft's own
renderer refuses, so the page drew blank after optimizing: hayro-jbig2
decodes a text region of at most 10,000 symbol instances, and refuses
32,768 symbols or more. The stream was valid (Poppler decoded it), but
every mark went into one text region and up to 65,536 symbols were kept.
A 300 dpi letter page of the optimizer test's own text crossed it.
A page with more than 10,000 marks is now placed by several text
regions, each over a band of rows and all referring to the one symbol
dictionary, which each region but the last keeps retained (7.2.4). Past
32,767 distinct symbols the image is coded generically.
New tests: 25,000 copies placed by three regions, which decode; the
symbol caps decoded, not just reached; and in the optimizer, a whole
letter page of rendered text that looks the same as JBIG2 symbols (it
drew blank before). The READMEs say "still looked at" for the caps, and
that the scans figure is the six pages' total (20% on one page).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
A second review found two rules tested one way only: a mark 257 tall
(not just wide) is left to the generic region, which also bounds the
bitmap allocated for each mark, and runs joined at the lower-left corner
are one mark. The test now has a 1 x 257 column and an anti-diagonal.
The caps on distinct symbols (65,536) and their pixels (2^24) are tested
at and past them, as the run and row caps are.
The scans figure now names its noise: with 2% or more of the letters'
edge pixels flipped, symbols save at most 8% over the generic region.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
Review found behaviour the tests let break unnoticed (each was a
surviving mutant, and each new test fails on it):
- black padding bits: a run reaching past the row would stop symbol
coding on many scans;
- Annex A's 32-bit range and PREV at exactly 256, where a decision would
go uncoded: coordinates past 4,435 on a 12,000-pixel-wide and a
10,050-row page, and the contexts of 4436's coding;
- marks joined at a corner are one mark; 256 pixels a side is a symbol,
257 is left to the generic region;
- the run and row caps, at and past them.
The roadmap's status line for this change now comes first, and the
"about a third smaller than Group 4 on scans" figure is replaced by what
was measured: 27-33% on the same pages with scan-like noise added.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
pdfcraft_filters::encode_jbig2 stores each distinct mark of a 1-bit
image (8-connected black pixels, at most 256 a side) once, as a symbol
in a symbol dictionary, and places its exact copies with an immediate
lossless text region that refers to it. Larger marks, and in a second
plan marks that occur once, go to a generic region over their box. It
keeps whichever of that and the generic coding (encode_jbig2_generic,
unchanged) is smaller. Only exact copies share a symbol, so the stream
decodes to the same bits.
Written from the JBIG committee's ISO/IEC 14492 Final Committee Draft:
6.4 and 6.5 (text region and symbol dictionary decoding), 7.2, 7.4.2
and 7.4.3 (segment headers and syntax) and Annex A (the integer coders,
checked against its worked example and Table A.1).
On six pages of rendered 300 dpi text the output is 28% of the generic
coding's size and 17% of Group 4's, at about 100 ms a page; hayro-jbig2
and Poppler (pdfimages) both decode it to the original bits. Scans,
whose copies of a letter are seldom identical, gain little: that needs
refinement coding. A dictionary shared between pages (/JBIG2Globals)
is a further step.
The optimizer's Monochrome Images > JBIG2 (lossless) and doc_optimize
mono jbig2 use it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
An image's /JBIG2Globals were decoded with the 1 GiB any stream may decode
to, before the JBIG2 page's size is known, so the page's pixel limit didn't
bound them: a few kilobytes of Flate could make export allocate up to 1 GiB.
They now decode within MAX_GLOBALS (32 MiB); globals past it skip the image,
with the limit in the reason. The test covers one byte over and exactly the
limit, and the image's /DecodeParms direct, by reference and in an array.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The test only checked each refusal's message. Without the tool's notation guard, set_props
refuses the same notation with the same message as a failed edit, so the test passed with the
guard removed. It now asserts InvalidArgs for every row, and fails on "a EVCALC b" without the
guard.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ckb and nb get all eleven rows, th and lo the six strings, and sq the five plurals beside its
strings, each under "# Untranslated". Their rows next to these were missing too, so following
them had added nothing.
hi, id, ko, lo and th list one plural form (plural_none), so they get no English copy of the
plurals: one English wording would be used for every count ("1 formulas read ..."). Without an
entry, the English fallback picks the right form, as it already does for the page's other plurals
in those catalogues.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
set_props refuses such a notation before writing anything, so the
Calculate tab can't store one either (the tool already refused it). A
refused edit used to close Field Properties and lose everything typed
into it; the dialog now stays open with its changes, as the dialog for
several fields does, and the notice says why (from the review).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
parse_calculate trimmed the notation with str::trim, which also took an
escaped space ending its last name: "Qty * Total\ " read back as
"Qty * Total\", a field the form doesn't have, while the script's
JavaScript still read "Total ". It now trims to its first and last
token, as the field-reading scan does. notation_storable compares the
names and operators read back with those given, so a notation ending in
a lone \ (which escapes the space after it) is refused; a proptest reads
back notations of any names (from the review).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
A notation is kept in the script's /** BVCALC … EVCALC **/ comment and read
back from there. One holding EVCALC was stored cut short ("a EVCALC b"
read back as "a", and its JavaScript translation didn't parse), one
holding */ ended the comment, and an empty one became "event.value = ;".
form_set_props now refuses each (af::notation_storable: it has to read back
as itself). The test also pins a notation beside op alone and beside
fields alone (from the review).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
steps() takes the widgets by object, so each of two fields sharing a name
gets its own step; a test checks it, unfocused and with a focus (from the
review: no test failed with the step looked up by name).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
A notation beside op and fields set the notation and dropped the rest, a
field name that wasn't a string was left out, a misspelt key was ignored,
and validate {"min": 0, "max": "100"} wrote a min-only range. Each is
now refused and nothing changes. A null bound, as form_fields shows the
one a range doesn't have, is no bound, so its output is taken back.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
