refactor: replace wildcard imports with explicit ones (S2208, batch_07)

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

crates/engine/src/cmd/mleader_edit.rs

@@ -9,8 +9,7 @@ use serde_json::{Value, json};
 
 use super::helpers::v3;
 use super::machines::{SelOutcome, SelectPhase};
-use super::{CommandSpec, bad, point_req, points_param, str_param, targets};
-
+use super::*;
 use crate::{Accept, Input, Interactive, Prompt, Result, Session, Step};
 
 /// Most arrowheads added by one call, and most multileaders aligned / collected by one call.

crates/engine/src/cmd/modify.rs

@@ -7,12 +7,10 @@ use cadcraft_geom::{
 };
 use serde_json::{Value, json};
 
-use super::helpers::{arc, circle, line, lwpoly, v3};
-
+use super::helpers::*;
 use super::machines::{SelOutcome, SelectPhase, number};
 use super::trimextend::{self, TrimM};
-use super::{CommandSpec, bad, bool_or, f64_or, f64_req, point_param, point_req, points_param, str_param, targets};
-
+use super::*;
 use crate::select::{SelectKind, SelectMode};
 use crate::{Accept, EngineError, Input, Interactive, Prompt, Result, Session, Step};
 

crates/engine/src/cmd/modify2.rs

@@ -9,11 +9,9 @@ use cadcraft_geom::{
 use serde_json::{Value, json};
 
 use super::curves::{self, Chain, MAX_GEN, TanObj};
-use super::helpers::{arc, line, lwpoly, v3};
-
+use super::helpers::*;
 use super::machines::{SelOutcome, SelectPhase, number};
-use super::{CommandSpec, bad, bool_or, f64_or, f64_req, point_param, point_req, str_param, targets};
-
+use super::*;
 use crate::{Accept, EngineError, Input, Interactive, Prompt, Result, Session, Step};
 
 mod curve_edits;

crates/engine/src/cmd/modify2/pedit_vertex.rs

@@ -1,9 +1,7 @@
 //! PEDIT Edit vertex: Break and Straighten between two marked vertices, Tangent directions
 //! that Fit honours, and Regen.
 
-use super::{
-    EntityKind, Handle, Input, LwPolyline, PPhase, PeditM, PolyVertex, Result, Session, Value, Vec2, bad, curves, json, other, push_entity, set_kind,
-};
+use super::*;
 
 fn ordered(pl: &LwPolyline, i: usize, j: usize) -> Result<(usize, usize)> {
     let n = pl.vertices.len();

crates/engine/src/cmd/modify2/splinedit.rs

@@ -6,10 +6,7 @@
 //! parametrisation, end tangents and fit tolerance. Control-point edits change the curve
 //! directly and drop the fit data, as the curve no longer follows it.
 
-use super::{
-    Accept, Entity, EntityKind, Handle, Input, Interactive, LwPolyline, MAX_GEN, PolyVertex, Prompt, Result, SelOutcome, SelectPhase, Session, Space,
-    Spline, Step, Value, Vec2, bad, bool_or, curves, f64_req, json, line, number, other, point_req, set_kind, str_param, targets,
-};
+use super::*;
 
 /// The spline after a JSON SPLINEDIT option (`option` plus that option's parameters).
 pub(super) fn run_splinedit(s: &mut Session, p: &Value) -> Result<Value> {

crates/engine/src/cmd/options.rs

@@ -8,8 +8,7 @@
 
 use serde_json::{Map, Value, json};
 
-use super::{CommandSpec, bad};
-
+use super::*;
 use crate::{Result, Session, Settings};
 
 /// The profile variables, in the order [`profile`] lists them.
@@ -178,7 +177,7 @@ fn run_options(s: &mut Session, p: &Value) -> Result<Value> {
 
 #[cfg(test)]
 mod tests {
-    use super::{CommandSpec, bad};
+    use super::*;
 
     #[test]
     fn every_profile_var_round_trips_through_restore() {

crates/engine/src/cmd/overkill.rs

@@ -13,7 +13,8 @@ use cadcraft_geom::{TAU, Vec2, Vec3, ccw_sweep, norm_angle};
 use serde_json::{Value, json};
 
 use super::machines::{SelOutcome, SelectPhase, number};
-use super::*;
+use super::{CommandSpec, bad, targets};
+
 use crate::{Accept, Input, Interactive, Prompt, Result, Session, Step};
 
 pub fn specs() -> Vec<CommandSpec> {

crates/engine/src/cmd/plotters.rs

@@ -14,7 +14,8 @@ use cadcraft_doc::{DevicePaper, Orientation, PageSetup, PlotOutput, PlotterConfi
 use cadcraft_geom::{Bounds2, Vec2};
 use serde_json::{Value, json};
 
-use super::*;
+use super::{CommandSpec, Result, bad, point_req, str_param};
+
 use crate::{Accept, EngineError, Input, Interactive, Prompt, Session, Step};
 
 /// Where plotter configuration files live. Names are file names ending in

crates/engine/src/cmd/props.rs

@@ -10,7 +10,8 @@ use cadcraft_doc::{EntityKind, Lineweight, Transparency};
 use cadcraft_geom::Vec3;
 use serde_json::{Value, json};
 
-use super::*;
+use super::{CommandSpec, bad, bool_or, f64_req, ok, point_req, point_value, str_param, targets};
+
 use crate::{Accept, Input, Interactive, Prompt, Result, Session, Step};
 
 pub fn specs() -> Vec<CommandSpec> {

crates/engine/src/cmd/props/linfile.rs

@@ -7,7 +7,8 @@ use serde_json::{Value, json};
 
 use super::super::helpers::support_text;
 use super::super::qselect::wildcard;
-use super::*;
+use super::{Result, Session, bad, bool_or, str_param};
+
 use crate::{Accept, Input, Interactive, Prompt, Step};
 
 /// Names no file may define: they are not linetype definitions.

crates/engine/src/cmd/props/matchprop.rs

@@ -6,7 +6,8 @@
 use cadcraft_doc::{Entity, EntityKind, Handle};
 use serde_json::{Value, json};
 
-use super::super::*;
+use super::super::{bad, targets};
+
 use crate::{Accept, Input, Interactive, Prompt, Result, Session, Step};
 
 /// Which properties MATCHPROP copies (its Settings).

crates/engine/src/cmd/qselect.rs

@@ -5,7 +5,8 @@ use cadcraft_color::Color;
 use cadcraft_doc::{Drawing, Entity, Handle};
 use serde_json::{Value, json};
 
-use super::*;
+use super::{CommandSpec, bad, str_param};
+
 use crate::{Result, Session};
 
 pub fn specs() -> Vec<CommandSpec> {
@@ -322,7 +323,7 @@ fn run_info(s: &mut Session, p: &Value) -> Result<Value> {
 mod tests {
     use serde_json::json;
 
-    use super::*;
+    use super::{CommandSpec, bad, str_param};
 
     fn session() -> Session {
         let mut s = Session::new();