refactor: replace wildcard imports with explicit ones (S2208, batch_00)

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

crates/engine/src/cmd/annoscale.rs

@@ -7,7 +7,8 @@ use cadcraft_doc::{AnnoScale, Drawing, EntityKind, Handle, MAX_SCALES, is_annota
 use serde_json::{Value, json};
 
 use super::machines::{SelOutcome, SelectPhase, SelectRun};
-use super::*;
+use super::{CommandSpec, bad, f64_req, ok, targets};
+
 use crate::{Accept, Input, Interactive, Prompt, Result, Session, Step};
 
 pub fn specs() -> Vec<CommandSpec> {

crates/engine/src/cmd/annotate.rs

@@ -9,7 +9,8 @@ use serde_json::{Value, json};
 
 use super::helpers::v3;
 use super::machines::{SelOutcome, SelectPhase, SelectRun};
-use super::*;
+use super::{CommandSpec, bad, point_param, point_req, points_param, str_param, targets};
+
 use crate::{Accept, EngineError, Input, Interactive, LeaderOrder, MLeaderOptions, Prompt, Result, Session, Step};
 
 pub fn specs() -> Vec<CommandSpec> {

crates/engine/src/cmd/annotate_dimedit.rs

@@ -6,7 +6,8 @@ use cadcraft_geom::{Segment, Vec2};
 use serde_json::{Value, json};
 
 use super::machines::{SelOutcome, SelectPhase};
-use super::*;
+use super::{CommandSpec, bad, bool_or, point_param, point_req, size_param, str_param, targets};
+
 use crate::{Accept, Input, Interactive, Prompt, Result, Session, Step};
 
 /// Most objects DIMBREAK Auto looks at, and most breaks it adds to one dimension.

crates/engine/src/cmd/annotate_qdim.rs

@@ -7,7 +7,8 @@ use cadcraft_geom::{Segment, Vec2};
 use serde_json::{Value, json};
 
 use super::machines::{SelOutcome, SelectPhase};
-use super::*;
+use super::{bad, key, point_param, point_req, points_param, str_param, targets};
+
 use crate::{Accept, Input, Interactive, Prompt, Result, Session, Step};
 
 pub(super) const PARAMS: &str = "{handles?, at: [x,y] (dimension line position), mode?: continuous|staggered|baseline|ordinate|radius|diameter (default continuous), vertical?: bool (default: from `at`), datum?: [x,y] (baseline and ordinate; default the first point, or the origin for ordinate), add?: [[x,y]], remove?: [[x,y]] (dimension points; removes those within `tolerance`)}";

crates/engine/src/cmd/array.rs

@@ -17,7 +17,8 @@ use serde_json::{Value, json};
 use super::helpers::{line, v3};
 use super::machines::{SelOutcome, SelectPhase, number};
 use super::modify::transform_entities;
-use super::*;
+use super::{CommandSpec, bad, bool_or, f64_or, find_command, point_param, point_req, str_param, targets};
+
 use crate::{Accept, EngineError, Input, Interactive, Prompt, Result, Session, Step};
 
 mod edit;
@@ -1171,7 +1172,7 @@ impl Interactive for PolarM {
 
 #[cfg(test)]
 mod tests {
-    use super::*;
+    use super::{CommandSpec, bad, bool_or, f64_or, find_command, point_param, point_req, str_param, targets};
 
     fn polar(n: u32, fill: f64) -> ArrayParams {
         let kind = ArrayKind::Polar(PolarArray { center: -Vec2::X, items: n, fill, rotate: true, rows: 1, row_spacing: 0.0, row_elevation: 0.0 });

crates/engine/src/cmd/mleader_edit.rs

@@ -9,8 +9,7 @@ use serde_json::{Value, json};
 
 use super::helpers::v3;
 use super::machines::{SelOutcome, SelectPhase};
-use super::{CommandSpec, bad, point_req, points_param, str_param, targets};
-
+use super::*;
 use crate::{Accept, Input, Interactive, Prompt, Result, Session, Step};
 
 /// Most arrowheads added by one call, and most multileaders aligned / collected by one call.

crates/engine/src/cmd/modify.rs

@@ -7,12 +7,10 @@ use cadcraft_geom::{
 };
 use serde_json::{Value, json};
 
-use super::helpers::{arc, circle, line, lwpoly, v3};
-
+use super::helpers::*;
 use super::machines::{SelOutcome, SelectPhase, number};
 use super::trimextend::{self, TrimM};
-use super::{CommandSpec, bad, bool_or, f64_or, f64_req, point_param, point_req, points_param, str_param, targets};
-
+use super::*;
 use crate::select::{SelectKind, SelectMode};
 use crate::{Accept, EngineError, Input, Interactive, Prompt, Result, Session, Step};
 

crates/engine/src/cmd/modify2.rs

@@ -9,11 +9,9 @@ use cadcraft_geom::{
 use serde_json::{Value, json};
 
 use super::curves::{self, Chain, MAX_GEN, TanObj};
-use super::helpers::{arc, line, lwpoly, v3};
-
+use super::helpers::*;
 use super::machines::{SelOutcome, SelectPhase, number};
-use super::{CommandSpec, bad, bool_or, f64_or, f64_req, point_param, point_req, str_param, targets};
-
+use super::*;
 use crate::{Accept, EngineError, Input, Interactive, Prompt, Result, Session, Step};
 
 mod curve_edits;

crates/engine/src/cmd/modify2/pedit_vertex.rs

@@ -1,9 +1,7 @@
 //! PEDIT Edit vertex: Break and Straighten between two marked vertices, Tangent directions
 //! that Fit honours, and Regen.
 
-use super::{
-    EntityKind, Handle, Input, LwPolyline, PPhase, PeditM, PolyVertex, Result, Session, Value, Vec2, bad, curves, json, other, push_entity, set_kind,
-};
+use super::*;
 
 fn ordered(pl: &LwPolyline, i: usize, j: usize) -> Result<(usize, usize)> {
     let n = pl.vertices.len();

crates/engine/src/cmd/modify2/splinedit.rs

@@ -6,10 +6,7 @@
 //! parametrisation, end tangents and fit tolerance. Control-point edits change the curve
 //! directly and drop the fit data, as the curve no longer follows it.
 
-use super::{
-    Accept, Entity, EntityKind, Handle, Input, Interactive, LwPolyline, MAX_GEN, PolyVertex, Prompt, Result, SelOutcome, SelectPhase, Session, Space,
-    Spline, Step, Value, Vec2, bad, bool_or, curves, f64_req, json, line, number, other, point_req, set_kind, str_param, targets,
-};
+use super::*;
 
 /// The spline after a JSON SPLINEDIT option (`option` plus that option's parameters).
 pub(super) fn run_splinedit(s: &mut Session, p: &Value) -> Result<Value> {

crates/engine/src/cmd/options.rs

@@ -8,8 +8,7 @@
 
 use serde_json::{Map, Value, json};
 
-use super::{CommandSpec, bad};
-
+use super::*;
 use crate::{Result, Session, Settings};
 
 /// The profile variables, in the order [`profile`] lists them.
@@ -178,7 +177,7 @@ fn run_options(s: &mut Session, p: &Value) -> Result<Value> {
 
 #[cfg(test)]
 mod tests {
-    use super::{CommandSpec, bad};
+    use super::*;
 
     #[test]
     fn every_profile_var_round_trips_through_restore() {