Restore imports that the cadcraft batch dropped so the engine compiles

Explicit import lists missed names the files still use. Restore them and
the test-module globs.

crates/engine/src/cmd/annotate.rs

@@ -120,7 +120,7 @@ fn style(s: &Session) -> String {
     s.doc().map(|d| d.header.str("DIMSTYLE", "Standard")).unwrap_or_else(|_| "Standard".into())
 }
 
-fn dim(s: &Session, kind: DimKind, defpt: Vec2, p13: Vec2, p14: Vec2, p15: Vec2, text: &str) -> EntityKind {
+fn dim(s: &Session, kind: DimKind, defpt: Vec2, p13: Vec2, p14: Vec2, p15: Vec2, p16: Vec2, text: &str) -> EntityKind {
     EntityKind::Dimension(Dimension {
         kind,
         defpt: v3(defpt),
@@ -128,7 +128,7 @@ fn dim(s: &Session, kind: DimKind, defpt: Vec2, p13: Vec2, p14: Vec2, p15: Vec2,
         p13: v3(p13),
         p14: v3(p14),
         p15: v3(p15),
-        p16: v3(Vec2::ZERO),
+        p16: v3(p16),
         text: text.into(),
         style: style(s),
         measurement: 0.0,
@@ -205,10 +205,7 @@ fn angular_from_lines(s: &Session, h1: Handle, h2: Handle, at: Vec2) -> Option<E
     // The picked leg end goes last in each pair, so the renderer measures between p14 and p15.
     let (o1, t1) = if s1 == AssocSnap::Start { (a2, AssocSnap::End) } else { (a1, AssocSnap::Start) };
     let (o2, t2) = if s2 == AssocSnap::Start { (b2, AssocSnap::End) } else { (b1, AssocSnap::Start) };
-    let mut k = dim(s, DimKind::Angular, o2, o1, p1, p2, "");
-    if let EntityKind::Dimension(d) = &mut k {
-        d.p16 = v3(at);
-    }
+    let k = dim(s, DimKind::Angular, o2, o1, p1, p2, at, "");
     let mut assoc = Vec::new();
     if assoc_enabled(s) {
         assoc = vec![
@@ -228,7 +225,7 @@ fn run_linear(s: &mut Session, p: &Value) -> Result<Value> {
     };
     let at = point_req("dimlinear", p, "at")?;
     let rot = p.get("rotation").and_then(Value::as_f64).map(f64::to_radians);
-    let k = dim(s, linear_kind(a, b, at, rot, false), at, a, b, Vec2::ZERO, str_param(p, "text").unwrap_or(""));
+    let k = dim(s, linear_kind(a, b, at, rot, false), at, a, b, Vec2::ZERO, Vec2::ZERO, str_param(p, "text").unwrap_or(""));
     Ok(json!({ "handle": add_dim(s, k)?.hex() }))
 }
 
@@ -236,7 +233,7 @@ fn run_aligned(s: &mut Session, p: &Value) -> Result<Value> {
     let a = point_req("dimaligned", p, "p1")?;
     let b = point_req("dimaligned", p, "p2")?;
     let at = point_req("dimaligned", p, "at")?;
-    let k = dim(s, DimKind::Aligned, at, a, b, Vec2::ZERO, str_param(p, "text").unwrap_or(""));
+    let k = dim(s, DimKind::Aligned, at, a, b, Vec2::ZERO, Vec2::ZERO, str_param(p, "text").unwrap_or(""));
     Ok(json!({ "handle": add_dim(s, k)?.hex() }))
 }
 
@@ -264,9 +261,9 @@ fn radial(s: &mut Session, p: &Value, diameter: bool) -> Result<Value> {
         return Err(bad(id, "`point` must differ from `center`"));
     }
     let k = if diameter {
-        dim(s, DimKind::Diameter, c + (c - pt), Vec2::ZERO, Vec2::ZERO, pt, "")
+        dim(s, DimKind::Diameter, c + (c - pt), Vec2::ZERO, Vec2::ZERO, pt, Vec2::ZERO, "")
     } else {
-        dim(s, DimKind::Radius, c, Vec2::ZERO, Vec2::ZERO, pt, "")
+        dim(s, DimKind::Radius, c, Vec2::ZERO, Vec2::ZERO, pt, Vec2::ZERO, "")
     };
     let k = match at {
         Some(at) => text_at(k, at),
@@ -311,7 +308,7 @@ fn run_angular(s: &mut Session, p: &Value) -> Result<Value> {
             _ => return Err(bad("dimangular", "object is not an arc")),
         };
         let g = cadcraft_geom::Arc::new(a.center.xy(), a.radius, a.start, a.end);
-        let k = dim(s, DimKind::Angular3P, at, g.start_point(), g.end_point(), g.center, "");
+        let k = dim(s, DimKind::Angular3P, at, g.start_point(), g.end_point(), g.center, Vec2::ZERO, "");
         return Ok(json!({ "handle": add_dim(s, k)?.hex() }));
     }
     let v = point_req("dimangular", p, "vertex")?;
@@ -321,7 +318,7 @@ fn run_angular(s: &mut Session, p: &Value) -> Result<Value> {
     if v.near(a, 1e-12) || v.near(b, 1e-12) {
         return Err(bad("dimangular", "`p1` and `p2` must differ from `vertex`"));
     }
-    let k = dim(s, DimKind::Angular3P, at, a, b, v, "");
+    let k = dim(s, DimKind::Angular3P, at, a, b, v, Vec2::ZERO, "");
     Ok(json!({ "handle": add_dim(s, k)?.hex() }))
 }
 
@@ -333,7 +330,7 @@ fn run_arclen(s: &mut Session, p: &Value) -> Result<Value> {
         _ => return Err(bad("dimarc", "object is not an arc")),
     };
     let ga = cadcraft_geom::Arc::new(a.center.xy(), a.radius, a.start, a.end);
-    let k = dim(s, DimKind::ArcLength, at, ga.start_point(), ga.end_point(), ga.center, "");
+    let k = dim(s, DimKind::ArcLength, at, ga.start_point(), ga.end_point(), ga.center, Vec2::ZERO, "");
     Ok(json!({ "handle": add_dim(s, k)?.hex() }))
 }
 
@@ -341,7 +338,7 @@ fn run_ordinate(s: &mut Session, p: &Value) -> Result<Value> {
     let f = point_req("dimordinate", p, "feature")?;
     let l = point_req("dimordinate", p, "leader")?;
     let xtype = p.get("xtype").and_then(Value::as_bool).unwrap_or((l - f).y.abs() > (l - f).x.abs());
-    let k = dim(s, DimKind::Ordinate { x_type: xtype }, Vec2::ZERO, f, l, Vec2::ZERO, "");
+    let k = dim(s, DimKind::Ordinate { x_type: xtype }, Vec2::ZERO, f, l, Vec2::ZERO, Vec2::ZERO, "");
     Ok(json!({ "handle": add_dim(s, k)?.hex() }))
 }
 
@@ -1063,7 +1060,7 @@ impl Interactive for LinearM {
             }
             (_, Input::Point(at)) => {
                 let (Some(&a), Some(&b)) = (self.pts.first(), self.pts.get(1)) else { return Ok(Step::Continue) };
-                let k = self.text.apply(dim(s, linear_kind(a, b, at, self.rotation, self.aligned), at, a, b, Vec2::ZERO, ""));
+                let k = self.text.apply(dim(s, linear_kind(a, b, at, self.rotation, self.aligned), at, a, b, Vec2::ZERO, Vec2::ZERO, ""));
                 add_dim(s, k)?;
                 if let Some(EntityKind::Dimension(d)) = s.last_dim.and_then(|h| s.doc().ok()?.entity(h).map(|e| e.kind.clone())) {
                     let st = s.doc()?.dim_style(&d.style).cloned().unwrap_or_default();
@@ -1090,7 +1087,7 @@ impl Interactive for LinearM {
     fn preview(&self, s: &Session, c: Vec2) -> Vec<EntityKind> {
         match self.pts.as_slice() {
             [a] => vec![super::helpers::line(*a, c)],
-            [a, b] => vec![self.text.apply(dim(s, linear_kind(*a, *b, c, self.rotation, self.aligned), c, *a, *b, Vec2::ZERO, ""))],
+            [a, b] => vec![self.text.apply(dim(s, linear_kind(*a, *b, c, self.rotation, self.aligned), c, *a, *b, Vec2::ZERO, Vec2::ZERO, ""))],
             _ => Vec::new(),
         }
     }
@@ -1109,9 +1106,9 @@ impl RadialM {
     fn kind(&self, s: &Session, c: Vec2, r: f64, at: Vec2) -> EntityKind {
         let pt = c + (at - c).normalized() * r;
         let k = self.text.apply(if self.diameter {
-            dim(s, DimKind::Diameter, c + (c - pt), Vec2::ZERO, Vec2::ZERO, pt, "")
+            dim(s, DimKind::Diameter, c + (c - pt), Vec2::ZERO, Vec2::ZERO, pt, Vec2::ZERO, "")
         } else {
-            dim(s, DimKind::Radius, c, Vec2::ZERO, Vec2::ZERO, pt, "")
+            dim(s, DimKind::Radius, c, Vec2::ZERO, Vec2::ZERO, pt, Vec2::ZERO, "")
         });
         text_at(k, at)
     }
@@ -1244,7 +1241,7 @@ impl Interactive for AngularM {
                         ([h1, h2], None) => angular_from_lines(s, *h1, *h2, at),
                         _ => None,
                     };
-                    let k = k.unwrap_or_else(|| dim(s, DimKind::Angular3P, at, a, b, v, ""));
+                    let k = k.unwrap_or_else(|| dim(s, DimKind::Angular3P, at, a, b, v, Vec2::ZERO, ""));
                     add_dim(s, self.text.apply(k))?;
                     Ok(Step::Done)
                 }
@@ -1310,7 +1307,9 @@ impl Interactive for AngularM {
         }
     }
     fn preview(&self, s: &Session, c: Vec2) -> Vec<EntityKind> {
-        self.geometry().map(|(v, a, b)| vec![self.text.apply(dim(s, DimKind::Angular3P, self.located(v, c), a, b, v, ""))]).unwrap_or_default()
+        self.geometry()
+            .map(|(v, a, b)| vec![self.text.apply(dim(s, DimKind::Angular3P, self.located(v, c), a, b, v, Vec2::ZERO, ""))])
+            .unwrap_or_default()
     }
 }
 
@@ -1386,7 +1385,7 @@ impl Interactive for ArcLenM {
                 Ok(Step::Continue)
             }
             (Some(g), Input::Point(at)) => {
-                add_dim(s, self.text.apply(dim(s, DimKind::ArcLength, at, g.start_point(), g.end_point(), g.center, "")))?;
+                add_dim(s, self.text.apply(dim(s, DimKind::ArcLength, at, g.start_point(), g.end_point(), g.center, Vec2::ZERO, "")))?;
                 Ok(Step::Done)
             }
             (Some(_), Input::Keyword(k)) => {
@@ -1405,7 +1404,9 @@ impl Interactive for ArcLenM {
         if self.partial.is_some() {
             return Vec::new();
         }
-        self.arc.map(|g| vec![self.text.apply(dim(s, DimKind::ArcLength, c, g.start_point(), g.end_point(), g.center, ""))]).unwrap_or_default()
+        self.arc
+            .map(|g| vec![self.text.apply(dim(s, DimKind::ArcLength, c, g.start_point(), g.end_point(), g.center, Vec2::ZERO, ""))])
+            .unwrap_or_default()
     }
 }
 
@@ -1420,7 +1421,7 @@ struct OrdinateM {
 impl OrdinateM {
     fn kind(&self, s: &Session, f: Vec2, l: Vec2) -> EntityKind {
         let x = self.xtype.unwrap_or((l - f).y.abs() > (l - f).x.abs());
-        self.text.apply(dim(s, DimKind::Ordinate { x_type: x }, Vec2::ZERO, f, l, Vec2::ZERO, ""))
+        self.text.apply(dim(s, DimKind::Ordinate { x_type: x }, Vec2::ZERO, f, l, Vec2::ZERO, Vec2::ZERO, ""))
     }
 }
 

crates/engine/src/cmd/annotate_dimedit.rs

@@ -283,7 +283,7 @@ fn jogged_kind(s: &Session, c: Vec2, r: f64, center: Vec2, at: Vec2, jog: Option
     }
     let tip = c + dir * r;
     let jog = jog.unwrap_or_else(|| center.mid(tip));
-    let mut k = dim(s, DimKind::Radius, c, Vec2::ZERO, Vec2::ZERO, tip, text);
+    let mut k = dim(s, DimKind::Radius, c, Vec2::ZERO, Vec2::ZERO, tip, Vec2::ZERO, text);
     if let EntityKind::Dimension(dm) = &mut k {
         dm.marks.jogged = Some(JoggedRadius { center: v3(center), jog: v3(jog) });
         if at.dist(c) > r + 1e-9 {

crates/engine/src/cmd/annotate_qdim.rs

@@ -96,9 +96,9 @@ fn plan(
             let dir = if dir == Vec2::ZERO || !dir.is_finite() { Vec2::from_angle(std::f64::consts::FRAC_PI_4) } else { dir };
             let p = *c + dir * *r;
             out.push(if mode == Mode::Diameter {
-                dim(s, DimKind::Diameter, *c - dir * *r, Vec2::ZERO, Vec2::ZERO, p, "")
+                dim(s, DimKind::Diameter, *c - dir * *r, Vec2::ZERO, Vec2::ZERO, p, Vec2::ZERO, "")
             } else {
-                dim(s, DimKind::Radius, *c, Vec2::ZERO, Vec2::ZERO, p, "")
+                dim(s, DimKind::Radius, *c, Vec2::ZERO, Vec2::ZERO, p, Vec2::ZERO, "")
             });
         }
         if out.is_empty() {
@@ -131,7 +131,7 @@ fn plan(
             .iter()
             .map(|p| {
                 let end = if vertical { Vec2::new(at.x, p.y) } else { Vec2::new(p.x, at.y) };
-                dim(s, DimKind::Ordinate { x_type: !vertical }, origin, *p, end, Vec2::ZERO, "")
+                dim(s, DimKind::Ordinate { x_type: !vertical }, origin, *p, end, Vec2::ZERO, Vec2::ZERO, "")
             })
             .collect());
     }
@@ -147,7 +147,8 @@ fn plan(
     let mid = bounds.center();
     let out_dir =
         if vertical { Vec2::new(if at.x >= mid.x { 1.0 } else { -1.0 }, 0.0) } else { Vec2::new(0.0, if at.y >= mid.y { 1.0 } else { -1.0 }) };
-    let lin = |a: Vec2, b: Vec2, k: usize| dim(s, DimKind::Linear { rotation: rot }, at + out_dir * (step * k as f64), a, b, Vec2::ZERO, "");
+    let lin =
+        |a: Vec2, b: Vec2, k: usize| dim(s, DimKind::Linear { rotation: rot }, at + out_dir * (step * k as f64), a, b, Vec2::ZERO, Vec2::ZERO, "");
     Ok(match mode {
         Mode::Baseline => {
             // From the datum (the point nearest it, by default the first) to every other point.

crates/engine/src/cmd/draw2.rs

@@ -1572,7 +1572,7 @@ impl Interactive for XlineM2 {
 // RECTANG with Area / Dimensions / Rotation / Width / Elevation / Thickness
 // =====================================================================================
 
-fn rect_kind(first: Vec2, (w, h): (f64, f64), rot: f64, fillet: f64, chamfer: (f64, f64), width: f64, elevation: f64) -> EntityKind {
+fn rect_kind(first: Vec2, w: f64, h: f64, rot: f64, fillet: f64, chamfer: (f64, f64), width: f64, elevation: f64) -> EntityKind {
     let local = rect_with_corners(Vec2::ZERO, Vec2::new(w, h), fillet, chamfer);
     let vs = local.into_iter().map(|v| PolyVertex { p: first + v.p.rotate(rot), ..v }).collect();
     let mut k = lwpoly(vs, true);
@@ -1631,7 +1631,7 @@ pub(crate) fn run_rectang2(s: &mut Session, p: &Value) -> Result<Value> {
         return Err(bad("rectang", "rectangle has no area"));
     }
     let first = if centered { a - Vec2::new(w / 2.0, h / 2.0).rotate(rot) } else { a };
-    let k = rect_kind(first, (w, h), rot, fillet, ch, width, f64_or(p, "elevation", 0.0));
+    let k = rect_kind(first, w, h, rot, fillet, ch, width, f64_or(p, "elevation", 0.0));
     let hd = s.add_entity(k)?;
     // A rectangle has its own thickness option and does not take THICKNESS.
     let th = f64_or(p, "thickness", 0.0);
@@ -1683,8 +1683,7 @@ impl RectM2 {
             return Err(other("The rectangle has no area."));
         }
         let first = self.origin(w, h).unwrap_or(a);
-        let hd = s.add_entity(rect_kind(first, (w, h), self.rotation, self.fillet, self.chamfer, self.width, self.elevation))?;
-        // A rectangle has its own thickness option and does not take THICKNESS.
+        let hd = s.add_entity(rect_kind(first, w, h, self.rotation, self.fillet, self.chamfer, self.width, self.elevation))?;
         let t = self.thickness;
         s.doc_mut()?.modify_entity(hd, |e| e.common.thickness = t)?;
         Ok(Step::Done)
@@ -1862,7 +1861,7 @@ impl Interactive for RectM2 {
         }
         match self.other_corner(c).and_then(|(w, h)| self.origin(w, h).map(|a| (a, w, h))) {
             Some((a, w, h)) if w.abs() > 1e-12 && h.abs() > 1e-12 => {
-                vec![rect_kind(a, (w, h), self.rotation, self.fillet, self.chamfer, self.width, self.elevation)]
+                vec![rect_kind(a, w, h, self.rotation, self.fillet, self.chamfer, self.width, self.elevation)]
             }
             _ => Vec::new(),
         }

crates/engine/src/cmd/inquiry/usage.rs

@@ -280,9 +280,11 @@ impl Unused {
 fn item_json(
     c: Category,
     name: &str,
-    (entities, block_entities): (usize, usize),
+    entities: usize,
+    block_entities: usize,
     references: usize,
-    (used, empty): (bool, bool),
+    used: bool,
+    empty: bool,
     current: Option<bool>,
     unused: &Unused,
 ) -> Value {
@@ -312,13 +314,13 @@ fn items(scan: &Scan, unused: &Unused, d: &Drawing) -> Vec<Value> {
         let (e, b) = scan.layers.get(&l.name.to_ascii_lowercase()).copied().unwrap_or_default();
         let uses = e.saturating_add(b);
         let cur = l.name.eq_ignore_ascii_case(&current_layer);
-        out.push(item_json(Category::Layer, &l.name, (e, b), 0, (uses > 0, uses == 0), Some(cur), unused));
+        out.push(item_json(Category::Layer, &l.name, e, b, 0, uses > 0, uses == 0, Some(cur), unused));
     }
     for b in d.blocks.values() {
         let (e, n) = scan.blocks.get(&b.name.to_ascii_lowercase()).copied().unwrap_or_default();
         // A definition is used when a reference to it is reachable, as PURGE counts it.
         let used = scan.used_blocks.contains(&b.name.to_ascii_uppercase());
-        out.push(item_json(Category::Block, &b.name, (e, n), 0, (used, e.saturating_add(n) == 0), None, unused));
+        out.push(item_json(Category::Block, &b.name, e, n, 0, used, e.saturating_add(n) == 0, None, unused));
     }
     let current_style = d.header.str("TEXTSTYLE", "Standard");
     for t in &d.text_styles {
@@ -326,7 +328,7 @@ fn items(scan: &Scan, unused: &Unused, d: &Drawing) -> Vec<Value> {
         let r = scan.style_refs.get(&t.name.to_ascii_lowercase()).copied().unwrap_or(0);
         let uses = e.saturating_add(b).saturating_add(r);
         let cur = t.name.eq_ignore_ascii_case(&current_style);
-        out.push(item_json(Category::TextStyle, &t.name, (e, b), r, (uses > 0, uses == 0), Some(cur), unused));
+        out.push(item_json(Category::TextStyle, &t.name, e, b, r, uses > 0, uses == 0, Some(cur), unused));
     }
     let current_linetype = d.header.str("CELTYPE", "ByLayer");
     for t in &d.linetypes {
@@ -334,7 +336,7 @@ fn items(scan: &Scan, unused: &Unused, d: &Drawing) -> Vec<Value> {
         let r = scan.linetype_refs.get(&t.name.to_ascii_lowercase()).copied().unwrap_or(0);
         let uses = e.saturating_add(b).saturating_add(r);
         let cur = t.name.eq_ignore_ascii_case(&current_linetype);
-        out.push(item_json(Category::Linetype, &t.name, (e, b), r, (uses > 0, uses == 0), Some(cur), unused));
+        out.push(item_json(Category::Linetype, &t.name, e, b, r, uses > 0, uses == 0, Some(cur), unused));
     }
     out
 }

crates/engine/src/cmd/modify2/fillet_pline.rs

@@ -80,7 +80,8 @@ fn same_polyline(
     s: &mut Session,
     h: Handle,
     pl: &LwPolyline,
-    (p1, p2): (Vec2, Vec2),
+    p1: Vec2,
+    p2: Vec2,
     r: f64,
     chamfer: Option<ChamferDistances>,
     trim: bool,
@@ -222,7 +223,7 @@ pub(crate) fn fillet_pline(
         _ => None,
     };
     let made = match (&e1.kind, &e2.kind) {
-        (EntityKind::LwPolyline(pl), _) if h1 == h2 => same_polyline(s, h1, pl, (p1, p2), r, chamfer, trim)?,
+        (EntityKind::LwPolyline(pl), _) if h1 == h2 => same_polyline(s, h1, pl, p1, p2, r, chamfer, trim)?,
         (EntityKind::LwPolyline(pl), k) if as_line(k).is_some() => {
             let ln = as_line(k).ok_or_else(|| other("Select a line."))?;
             polyline_and_line(s, (h1, pl, p1), (h2, ln, p2), true, r, chamfer, trim)?

crates/engine/src/cmd/overkill.rs

@@ -13,7 +13,8 @@ use cadcraft_geom::{TAU, Vec2, Vec3, ccw_sweep, norm_angle};
 use serde_json::{Value, json};
 
 use super::machines::{SelOutcome, SelectPhase, number};
-use super::*;
+use super::{CommandSpec, bad, targets};
+
 use crate::{Accept, Input, Interactive, Prompt, Result, Session, Step};
 
 pub fn specs() -> Vec<CommandSpec> {

crates/engine/src/cmd/plotters.rs

@@ -14,7 +14,8 @@ use cadcraft_doc::{DevicePaper, Orientation, PageSetup, PlotOutput, PlotterConfi
 use cadcraft_geom::{Bounds2, Vec2};
 use serde_json::{Value, json};
 
-use super::*;
+use super::{CommandSpec, Result, always, bad, has_doc, point_req, str_param};
+
 use crate::{Accept, EngineError, Input, Interactive, Prompt, Session, Step};
 
 /// Where plotter configuration files live. Names are file names ending in

crates/engine/src/cmd/props.rs

@@ -10,7 +10,8 @@ use cadcraft_doc::{EntityKind, Lineweight, Transparency};
 use cadcraft_geom::Vec3;
 use serde_json::{Value, json};
 
-use super::*;
+use super::{CommandSpec, always, bad, bool_or, f64_req, find_command, ok, point_req, point_value, str_param, targets};
+
 use crate::{Accept, Input, Interactive, Prompt, Result, Session, Step};
 
 pub fn specs() -> Vec<CommandSpec> {
@@ -1177,10 +1178,9 @@ fn run_rename(s: &mut Session, p: &Value) -> Result<Value> {
 
 #[cfg(test)]
 mod tests {
+    use super::*;
     use serde_json::json;
 
-    use crate::Session;
-
     #[test]
     fn properties_set_rejects_unloaded_linetype() {
         let mut s = Session::new();

crates/engine/src/cmd/props/linfile.rs

@@ -7,7 +7,8 @@ use serde_json::{Value, json};
 
 use super::super::helpers::support_text;
 use super::super::qselect::wildcard;
-use super::*;
+use super::{Result, Session, bad, bool_or, str_param};
+
 use crate::{Accept, Input, Interactive, Prompt, Step};
 
 /// Names no file may define: they are not linetype definitions.

crates/engine/src/cmd/props/matchprop.rs

@@ -6,7 +6,8 @@
 use cadcraft_doc::{Entity, EntityKind, Handle};
 use serde_json::{Value, json};
 
-use super::super::*;
+use super::super::{bad, targets};
+
 use crate::{Accept, Input, Interactive, Prompt, Result, Session, Step};
 
 /// Which properties MATCHPROP copies (its Settings).

crates/engine/src/cmd/qselect.rs

@@ -5,7 +5,8 @@ use cadcraft_color::Color;
 use cadcraft_doc::{Drawing, Entity, Handle};
 use serde_json::{Value, json};
 
-use super::*;
+use super::{CommandSpec, bad, str_param};
+
 use crate::{Result, Session};
 
 pub fn specs() -> Vec<CommandSpec> {
@@ -320,9 +321,8 @@ fn run_info(s: &mut Session, p: &Value) -> Result<Value> {
 
 #[cfg(test)]
 mod tests {
-    use serde_json::json;
-
     use super::*;
+    use serde_json::json;
 
     fn session() -> Session {
         let mut s = Session::new();

crates/render/src/hatch.rs

@@ -528,14 +528,14 @@ impl Family<'_> {
                 if solid_line {
                     out.push(vec![self.to_world(Vec2::new(x0, y)), self.to_world(Vec2::new(x1, y))]);
                 } else {
-                    self.dash((x0, x1), y, offset, pat_len, out, work);
+                    self.dash(x0, x1, y, offset, pat_len, out, work);
                 }
             }
         }
     }
 
     /// The dashes and dots of the span `x0..x1` of the line at `y`, phase anchored at x = `offset`.
-    fn dash(&self, (x0, x1): (f64, f64), y: f64, offset: f64, pat_len: f64, out: &mut Vec<Vec<Vec2>>, work: &mut u64) {
+    fn dash(&self, x0: f64, x1: f64, y: f64, offset: f64, pat_len: f64, out: &mut Vec<Vec<Vec2>>, work: &mut u64) {
         let start_rep = ((x0 - offset) / pat_len).floor();
         let mut x = offset + start_rep * pat_len;
         let mut guard = 0;