From the review of #4605. TraceParams::swatches isn't in the settings' JSON (serde skip), so a Document Library trace whose swatches were edited while it ran still applied, with the old colours; the trace's inputs now hold them. The 100 ms repaint that keeps background work moving left traces out, so without input a finished trace could wait for the next event.
In Affinity Designer, Recolor Adjustment layers (RcRA) can be attached to
vector groups/shapes via AdCh. Lightness 1.0 recolors target elements to
white. Import visible RcRA layers as ColorOverlay effects and apply them
during node appearance evaluation.
Create Gradient Mesh's To Center / To Edge highlight lightened every point
towards RGB white, so a CMYK (or grey) point became display RGB. A patch with
any non-CMYK corner then mixes in RGB, and the PDF writer separated those
colours back to CMYK with K = 0, moving ink off the K plate. Points now
lighten towards white in their own colour model (no ink for CMYK), so the
mesh stays CMYK and K shrinks with the other inks. Flat meshes (highlight 0)
already kept their inks.
An 8-bit PCX file whose image data is followed by the palette marker
(0x0C) and fewer than 768 color bytes was read as gray levels. The reader
now notes where the run-length encoded image data ends, and when the
palette marker follows it without all 768 colors, refuses the file as cut
short. An 8-bit file with nothing after its image data still reads as
gray levels, and a gray level of 12 that falls 769 bytes before the end of
such a file is read as a pixel instead of as the palette marker.
A new reader, written from the ZSoft PCX Technical Reference Manual, decodes
the run-length encoded scan lines of 1-bit images in the header palette's
first two colors (black and white when the version has no palette or the two
colors are the same), 1-bit images in two to four planes and 4-bit images
with the header's palette (the EGA colors for versions 0 and 3), 2-bit CGA
images in the colors that the header's CGA background and palette settings
pick, 8-bit images with the 256-color palette after the image data (gray
levels without one) and 24-bit images in three planes. The image is stored as PNG at the resolution of the header's HDpi and
VDpi fields.
Open and Place list PCX, and pasting a copied .pcx file and Glass's Load
Texture… read it by its header. A file of another depth or plane count, one
cut short and one whose pixels as RGBA pass the pixel allowance are refused
with a message before its pixels are decoded. The desktop packaging does not
associate .pcx files, and no export writes them.
Docs: docs/file-format-parity.md, docs/target-app-parity.md, docs/mcp.md,
docs/releasing.md.
Pages that share one Contents array made the name of a refused stream read that array once per page, quadratic in a crafted file. Each object is now read once, and a page's own array as before. From the review of #4612.
A page's Contents can be an array written as an object of its own (/Contents 6 0 R). Its streams were named "a stream in it": the reference was compared with the stream, not the array's items. From the review of #4603.
The Quick Actions listed Object › Path's Offset Path and Simplify for every
selection, but both take paths: with type selected, the dialog opened and
could only fail ("Offset Path: select paths"). They are now left out when
every selected object is type, as Lock and Isolate Group are when they can't
run; live type offsets through the Appearance panel's Effect › Path ›
Offset Path, which works on type.
Follow-up to #4345 / #4145 per maintainer guidance from @bflatastic.
- In `crates/effects/src/geometry.rs` & `crates/effects/src/reshape.rs`:
- Implements `optimize_geometry_effects`: reorders pure-translation Transform effects
with copies after a terminal round-join Offset Path effect when the effective style is safe
(NonZero fill and no stroke).
- Offsetting a union equals the union of offsets for round (Minkowski) offsets; moving
pure-translation copies after the terminal offset evaluates Offset Path once on the base
geometry rather than over dozens of multiplied copies, turning O(copies * segments) planar
sweep explosion into a single fast offset plus lightweight affine copies.
- Safely commutes across multiple consecutive pure-translation Transform effects.
- Preserves exact visual geometry by leaving miter, bevel, EvenOdd, stroked, or non-terminal
effect stacks in their original order.
- Added comprehensive unit and regression tests in `crates/effects/src/tests.rs`.
- Added contributor entry in `contributors/people.toml`.
Pattern, art and auto-corner brushes used to flatten the art into chords
wherever the path bends, so Expand Brush Strokes left polygons with
hundreds of corner anchors. Each art segment now comes out as cubics
matched to the bent segment's ends and derivatives and halved until they
hold to a quarter of the flattening tolerance (never below the 0.05 pt
the path is flattened to). Anchors stay anchors, lines that stay straight
stay lines, and the halving is capped in depth and in anchors: where the
fit would take more anchors than the chords, or the map gives points that
are not finite, that subpath falls back to the chords, now without the
non-finite points.
A 4-anchor circle tile round a 400 pt circle: 68 anchors a tile -> about 9,
all with handles, 0.04 pt from the bent art against 0.19 for the chords;
stroke_pieces 169 -> 244 us for the 31-tile stroke.
Tracing a photo or a large image ran inside imageTrace.make on the UI
thread, so the window froze for as long as the trace took, with nothing
to say it was working.
A trace the user asks for (Object > Image Trace > Make and Make and
Expand, the task bar's Image Trace, the Image Trace panel's Trace and
presets) now runs on a thread of its own, as heavy plug-in filters do.
The status bar says so, and after 0.4 s a progress window shows how
many of the image's colors are traced, with Cancel and Continue in
Background (imageTrace.cancelRuns, imageTrace.hideRuns).
The result goes back to the command it was prepared for
(cmd::TraceRun, Traced::hand_in), which takes it only for the same
object, image and settings, so the edit is one undo step as before. A
newer trace of the same object replaces one still running, and a trace
whose image or settings changed meanwhile changes nothing. The control
channel, MCP, scripts and the web trace at once, as before.
The tracer reports its stages and color layers to a callback and stops
when it says so (trace_watched).
With Styling set to Internal CSS, Inline Style or Style Entities, font-size
and letter-spacing were written as bare numbers. Only presentation attributes
take a bare number; in CSS a browser drops them, so the type was drawn at its
default size. They are now written in px, SVG's user unit, and presentation
attributes keep bare numbers.
A page drawing one form over and over made its art again for every drawing
with no limit (a 1 KB file took 877 MB), and a form decoding to 64 MiB drawn
a thousand times hung. The import now makes at most half the objects a saved
document may hold (2M, 256K on the web), leaving the rest out with a warning,
and the scan reads at most 2 GiB of form content per page before refusing it
as past the reader's limits.
While the center was dragged out, the rays pointed at the pointer, as a
polygon's first corner does, and Shift put them back in their original
orientation. In the reference app they turn by a step for each update
of the drag as the pointer moves up or down, and Shift stops the turn
where it is.
Each update of the center drag in which the pointer's document y grows
now adds 0.1 radian (about 5.73°) to the rays' turn, one in which it
falls takes 0.1 radian away, and one at the same y leaves the turn as
it is. Shift held keeps the turn, and turning goes on from there once
Shift is let go. Space held moves the flare without turning the rays.
General › Constrain Angle no longer sets the turn under Shift.
Docs: docs/mcp.md, docs/target-app-parity.md.
The release that places the rings' end point applied the pointer's last
movement to the end point only, so with Space held the flare changed
shape instead of moving. The release now moves the center by that
movement as well. The progress doc says how Shift and General >
Constrain Angle set the rays' orientation.
The reference app's Flare tool rotates the rays as the center is dragged
out, Shift constrains them to their original orientation, and Space
held moves the shape being drawn. VectorCraft's Flare tool drew the
rays in one fixed orientation and ignored Shift and Space.
shape.flare takes rotation (degrees, clockwise), which turns the rays
about the center and leaves the halo, the center and the rings as they
are. While the center is dragged out, the rays turn with the pointer,
as a polygon's first corner does, and a drag straight up leaves them
unturned. Shift keeps them unturned, or turned by General › Constrain
Angle as a polygon drawn with Shift is. Space held during the center
drag or the drag that places the rings' end point moves the flare at
its current size, and the drag goes on from there when Space is let
go, as with the shape tools.
Docs: docs/mcp.md, docs/target-app-parity.md.
The Place dialog's title and button, its undo step and the Libraries panel's Place item read "Yer" (a place, a location). They all name the command, "Yerleştir".
The Turkish catalog translated the bare "Open" as the adjective (Açık), so the Home screen's Open button and the History panel's first row read "open" rather than "open it". The Arc tool's Type choice, where Open is the adjective, now looks its labels up in a "shape" context (falling back to the plain row in the other languages), and Turkish gives it Açık there.
When the editing data's art is rejected (another page size, art the page
doesn't draw, too many text objects…), the file still comes in as its page,
but now on a layer above the editing data's layers. They come in empty, in
their order, with their names, visibility, lock, print option and sublayers.
The page's layer takes a free name when the file's layers have its Layer 1.
The Selection tool's double-click on nothing (or on art outside the isolated group) leaves isolation mode; Direct Selection's did nothing there. It now does the same.
In typography and Illustrator, Shift+Enter inserts a soft return (forced
line break) rather than ending the paragraph. Text wraps to the next line
without applying paragraph-level spacing (space before/after, first-line
indents), list continuation lines keep their parent item without repeating
markers, and justified text does not stretch lines ending with a soft return.
- Forward active modifier keys for Enter in ui-egui shortcuts so the tool
detects Shift+Enter.
- Type tool inserts U+2028 (LINE SEPARATOR) on Shift+Enter.
- Text shaping and layout treat U+2028 as an invisible zero-advance control
character, breaking the line in point and area type.
- Paragraph spacing and list markers apply once per paragraph as intended.
With nothing selected, a click with the Eyedropper picks up an object's attributes and an Alt/Option-click on another object applies them, as the reference app's Eyedropper does. Alt-click only copied from a selected object, and with nothing selected it failed. The session now keeps a copy of what appearance.copyFrom picked up last, and a reversed copy with nothing selected applies it.
VoiceLessQ