address review: stop matching database records once a computed criterion exhausts the work budget

crates/calc/src/eval.rs

@@ -39,6 +39,15 @@ const MAX_DEPTH: usize = 400;
 /// every legitimate call; hostile work that grows past one dimension (a LAMBDA that recurses
 /// or nest `MAP` into `MAP`) then stops at the same bound instead of squaring.
 const LAMBDA_FUEL: u64 = MAX_CELLS;
+/// Work one cell's formula may do: one unit per expression evaluated, per cell read from a
+/// reference, per array value handed to a function, per pair of areas intersected and per
+/// character of a defined name's formula parsed where the name is used. Each limit
+/// above bounds one kind of step, but a compact formula could still repeat bounded steps
+/// exponentially often (defined names that each use the one before twice, a computed criterion
+/// whose database function reruns it, an aggregate over a large array inside every LAMBDA call).
+/// Past this the formula is `#CALC!`. It is far above what a formula that reads every cell of a
+/// full-size array a few times needs.
+const EVAL_WORK: u64 = 16 * MAX_CELLS;
 
 #[derive(Clone, Copy, Debug, PartialEq, Eq, Hash)]
 pub struct Area {
@@ -139,6 +148,16 @@ pub struct Evaluator<'h> {
     /// runs out of work after the same number of calls that a legitimately wide one could
     /// make, instead of an amount of work that squares with array nesting (#2382).
     fuel: u64,
+    /// Work this cell still has left (see [`EVAL_WORK`]), shared by every branch of the formula
+    /// and by the formulas it computes on the way (names, computed criteria).
+    work: u64,
+    /// A spend found too little work left. A spend that leaves exactly nothing is fine, so this
+    /// can't be told from `work` alone; a database function checks it after its computed
+    /// criteria ran, whose failures it can't otherwise see.
+    exhausted: bool,
+    /// Computed criteria being evaluated, outermost first: one that is reached again from inside
+    /// itself counts as not met instead of repeating its work at every level.
+    active_criteria: Vec<(usize, CellRef)>,
 }
 
 struct FnCtx<'a, 'h> {
@@ -168,6 +187,9 @@ impl Ctx for FnCtx<'_, '_> {
     fn computed_criterion(&mut self, row: usize, col: usize, db: &Array, record: usize) -> Option<bool> {
         let area = self.criteria?;
         let at = area.range.start.offset(row as i64, col as i64).filter(|c| area.range.contains(*c))?;
+        if self.ev.active_criteria.contains(&(area.sheet, at)) {
+            return Some(false);
+        }
         let expr = self.ev.host.workbook().sheet(area.sheet)?.cell(at)?.formula.as_ref()?.expr_arc()?;
         let shifted = gridcraft_formula::adjust::shift_relative((*expr).clone(), record as i64 - 1, 0);
         let env = (0..db.cols)
@@ -187,12 +209,24 @@ impl Ctx for FnCtx<'_, '_> {
             calls: self.ev.calls,
             stack_top: self.ev.stack_top,
             fuel: self.ev.fuel,
+            work: self.ev.work,
+            exhausted: false,
+            active_criteria: std::mem::take(&mut self.ev.active_criteria),
         };
+        ev.active_criteria.push((area.sheet, at));
         let v = matches!(ev.value(&shifted).scalar().to_bool(), Ok(true));
         // The child's spend counts against this cell's budget.
         self.ev.fuel = ev.fuel;
+        self.ev.work = ev.work;
+        self.ev.exhausted |= ev.exhausted;
+        let mut active = std::mem::take(&mut ev.active_criteria);
+        active.pop();
+        self.ev.active_criteria = active;
         Some(v)
     }
+    fn exhausted(&self) -> bool {
+        self.ev.exhausted
+    }
     fn has_lambda(&self) -> bool {
         self.lambda.is_some()
     }
@@ -210,7 +244,42 @@ impl Ctx for FnCtx<'_, '_> {
 
 impl<'h> Evaluator<'h> {
     pub fn new(host: &'h mut dyn Host, sheet: usize, at: CellRef) -> Self {
-        Evaluator { host, sheet, at, env: Vec::new(), depth: 0, calls: 0, stack_top: 0, fuel: LAMBDA_FUEL }
+        Evaluator {
+            host,
+            sheet,
+            at,
+            env: Vec::new(),
+            depth: 0,
+            calls: 0,
+            stack_top: 0,
+            fuel: LAMBDA_FUEL,
+            work: EVAL_WORK,
+            exhausted: false,
+            active_criteria: Vec::new(),
+        }
+    }
+
+    /// Spends `units` of this cell's work; `false` (and nothing left) when there isn't enough.
+    pub(crate) fn spend(&mut self, units: u64) -> bool {
+        match self.work.checked_sub(units) {
+            Some(w) => {
+                self.work = w;
+                true
+            }
+            None => {
+                self.work = 0;
+                self.exhausted = true;
+                false
+            }
+        }
+    }
+
+    /// Charges the values of an array (one unit per value; one for anything else).
+    pub(crate) fn spend_on(&mut self, v: &Value) -> bool {
+        match v {
+            Value::Array(a) => self.spend(a.data.len() as u64),
+            _ => self.spend(1),
+        }
     }
 
     /// Evaluates to a value (references are dereferenced; multi-cell → array).
@@ -260,18 +329,27 @@ impl<'h> Evaluator<'h> {
         }
         // A reference keeps its size, so the array has its shape and its blanks count
         // (`=A1:A10`, `SUMPRODUCT(--(A1:A10=""))`).
+        let range = self.read_range(a);
+        let (h, w) = (range.height() as usize, range.width() as usize);
+        if (h as u64) * (w as u64) > MAX_CELLS {
+            return Value::Error(CellError::Num);
+        }
+        if !self.spend((h as u64) * (w as u64)) {
+            return Value::Error(CellError::Calc);
+        }
+        let data = self.host.range_values(a.sheet, range);
+        Array::new(h, w, data).map(Value::from).unwrap_or(Value::Error(CellError::Value))
+    }
+
+    /// The block that reading `a` gives: `a` itself, or when it is large (or runs to the sheet's
+    /// edge) the part inside the sheet's used range.
+    pub(crate) fn read_range(&mut self, a: &Area) -> RangeRef {
         let cells = u64::from(a.range.height()) * u64::from(a.range.width());
         // `A:A`, `1:1` and `A2:A1048576` run to the edge of the sheet: they stand for "the rest of
         // the column", not for a block of a chosen size.
         let to_edge = a.range.end.row == MAX_ROWS - 1 || a.range.end.col == MAX_COLS - 1;
         let full_size = cells <= FULL_SIZE_CELLS || (!to_edge && cells <= FULL_SIZE_BOUNDED_CELLS);
-        let range = if full_size { a.range } else { self.trim(a) };
-        let (h, w) = (range.height() as usize, range.width() as usize);
-        if (h as u64) * (w as u64) > MAX_CELLS {
-            return Value::Error(CellError::Num);
-        }
-        let data = self.host.range_values(a.sheet, range);
-        Array::new(h, w, data).map(Value::from).unwrap_or(Value::Error(CellError::Value))
+        if full_size { a.range } else { self.trim(a) }
     }
 
     /// Trims the bottom/right of an area to the sheet's used range (keeps the top-left so
@@ -304,6 +382,9 @@ impl<'h> Evaluator<'h> {
             self.host.stack_exhausted();
             return err(CellError::Num);
         }
+        if !self.spend(1) {
+            return err(CellError::Calc);
+        }
         self.depth += 1;
         if self.depth > MAX_DEPTH {
             self.depth -= 1;
@@ -370,6 +451,11 @@ impl<'h> Evaluator<'h> {
         if let Some(def) = wb.name(bare, scope_sheet) {
             let text = def.formula.clone();
             let scope = def.scope.unwrap_or(self.sheet);
+            // Each use parses and evaluates the definition again: names that each use the one
+            // before twice double the work per name, so it is charged.
+            if !self.spend(text.len() as u64) {
+                return err(CellError::Calc);
+            }
             return match gridcraft_formula::parse_name(&text) {
                 Ok(expr) => {
                     // Relative references in a name are relative to A1: used here, they move by
@@ -562,6 +648,10 @@ impl<'h> Evaluator<'h> {
                 let (x, y) = (self.eval(a), self.eval(b));
                 match (x, y) {
                     (Ev::R(mut xa), Ev::R(ya)) => {
+                        // A union reused through LET doubles at each step: its areas count.
+                        if !self.spend((xa.len() as u64).saturating_add(ya.len() as u64)) {
+                            return err(CellError::Calc);
+                        }
                         xa.extend(ya);
                         Ev::R(xa)
                     }
@@ -573,6 +663,11 @@ impl<'h> Evaluator<'h> {
                 let (x, y) = (self.eval(a), self.eval(b));
                 match (x, y) {
                     (Ev::R(xa), Ev::R(ya)) => {
+                        // Every pair is looked at, and each may be kept: charged before the loop,
+                        // so unions squared through LET can't build an enormous list.
+                        if !self.spend((xa.len() as u64).saturating_mul(ya.len() as u64)) {
+                            return err(CellError::Calc);
+                        }
                         let mut out = Vec::new();
                         for p in &xa {
                             for q in &ya {
@@ -666,6 +761,113 @@ mod fuel_tests {
         ev.value(&gridcraft_formula::parser::parse(src).unwrap_or_else(|e| panic!("{e}")))
     }
 
+    /// Evaluates `src` in `wb` with `work` units of work, and the work left.
+    fn eval_work(wb: Workbook, work: u64, src: &str) -> (Value, u64) {
+        let mut host = Empty { wb };
+        let mut ev = Evaluator::new(&mut host, 0, CellRef::new(0, 0));
+        ev.work = work;
+        let v = ev.value(&gridcraft_formula::parser::parse(src).unwrap_or_else(|e| panic!("{e}")));
+        (v, ev.work)
+    }
+
+    fn is_calc(v: &Value) -> bool {
+        matches!(v, Value::Error(CellError::Calc))
+    }
+
+    /// Serves the workbook's stored values, for database functions to read.
+    struct Stored {
+        wb: Workbook,
+    }
+    impl Host for Stored {
+        fn workbook(&self) -> &Workbook {
+            &self.wb
+        }
+        fn cell_value(&mut self, sheet: usize, c: CellRef) -> Value {
+            self.wb.sheet(sheet).and_then(|s| s.cell(c)).map_or(Value::Empty, |cell| cell.value.clone())
+        }
+        fn now_serial(&self) -> f64 {
+            0.0
+        }
+        fn random(&mut self) -> f64 {
+            0.0
+        }
+    }
+
+    /// A computed criterion that runs out of work counts as not met for its record, which the
+    /// database function can't see: it must answer #CALC!, not a count that leaves records out.
+    #[test]
+    fn a_computed_criterion_out_of_work_makes_the_database_function_calc() {
+        use gridcraft_model::{Cell, Formula};
+        let mut wb = Workbook::new();
+        let name = |name: String, formula: String| gridcraft_model::DefinedName { name, scope: None, formula, comment: String::new(), hidden: false };
+        wb.names.push(name("Step0".into(), "1".into()));
+        for i in 1..=60 {
+            wb.names.push(name(format!("Step{i}"), format!("Step{}+Step{}", i - 1, i - 1)));
+        }
+        let at = |s: &str| CellRef::parse(s).unwrap();
+        let sheet = wb.sheet_mut(0).unwrap();
+        for (r, (n, age)) in [("name", Value::text("age")), ("a", Value::number(1.0)), ("b", Value::number(2.0))].into_iter().enumerate() {
+            sheet.cells.set(at(&format!("A{}", r + 1)), Cell::value(Value::text(n)));
+            sheet.cells.set(at(&format!("B{}", r + 1)), Cell::value(age));
+        }
+        sheet.cells.set(at("D1"), Cell::value(Value::text("Formula")));
+        let host_wb = |criterion: &str| {
+            let mut wb = wb.clone();
+            // A criteria cell is read by its value first (a blank one matches everything): give it
+            // the value a recalculation would have stored.
+            let mut cell = Cell::formula(Formula::new(criterion));
+            cell.value = Value::Bool(true);
+            wb.sheet_mut(0).unwrap().cells.set(at("D2"), cell);
+            wb
+        };
+        let run = |criterion: &str| {
+            let mut host = Stored { wb: host_wb(criterion) };
+            let mut ev = Evaluator::new(&mut host, 0, CellRef::new(9, 9));
+            ev.work = 100_000;
+            ev.value(&gridcraft_formula::parser::parse("=DCOUNT(A1:B3,\"age\",D1:D2)").unwrap())
+        };
+        assert_eq!(run("=B2>0"), Value::number(2.0), "a cheap criterion counts every record");
+        assert!(is_calc(&run("=Step60>0")), "{:?}", run("=Step60>0"));
+    }
+
+    #[test]
+    fn names_that_double_at_each_step_run_out_of_work() {
+        // Step1 = Step0+Step0, Step2 = Step1+Step1, ...: Step60 would evaluate Step0 2^60 times.
+        let mut wb = Workbook::default();
+        let name = |name: String, formula: String| gridcraft_model::DefinedName { name, scope: None, formula, comment: String::new(), hidden: false };
+        wb.names.push(name("Step0".into(), "1".into()));
+        for i in 1..=60 {
+            wb.names.push(name(format!("Step{i}"), format!("Step{}+Step{}", i - 1, i - 1)));
+        }
+        let (v, _) = eval_work(wb.clone(), EVAL_WORK, "=Step5");
+        assert_eq!(v, Value::number(32.0));
+        let (v, left) = eval_work(wb, 100_000, "=Step60");
+        assert!(is_calc(&v), "{v:?}");
+        assert_eq!(left, 0);
+    }
+
+    #[test]
+    fn intersections_of_unions_are_charged_per_pair() {
+        let wb = Workbook::default();
+        // 4 x 4 pairs, 4 of which meet.
+        let src = "=AREAS((A1,B1,C1,D1) (A1,B1,C1,D1))";
+        let (v, _) = eval_work(wb.clone(), EVAL_WORK, src);
+        assert_eq!(v, Value::number(4.0));
+        let (v, _) = eval_work(wb, 20, src);
+        assert!(is_calc(&v), "{v:?}");
+    }
+
+    #[test]
+    fn an_aggregate_inside_every_lambda_call_spends_work() {
+        let wb = Workbook::default();
+        // 100 calls, each summing the 10,000 values of a captured array: about a million units.
+        let src = "=LET(big,SEQUENCE(10000),SUM(MAP(SEQUENCE(100),LAMBDA(x,SUM(big)))))";
+        let (v, _) = eval_work(wb.clone(), 2_000_000, src);
+        assert_eq!(v, Value::number(100.0 * 50_005_000.0));
+        let (v, _) = eval_work(wb, 200_000, src);
+        assert!(is_calc(&v), "{v:?}");
+    }
+
     #[test]
     fn lambda_calls_spend_fuel_and_run_out_quietly() {
         // Three applications, one charge each: 3 inside the budget. (A nested MAP wouldn't do

crates/calc/src/eval/call.rs

@@ -353,8 +353,21 @@ impl<'h> Evaluator<'h> {
             };
             evaluated.push(Arg { value, from_ref });
         }
+        // The function may go through every value it is given (a SUM inside each call of a
+        // LAMBDA over a large array): the values count against the cell's work.
+        let values = evaluated.iter().fold(0u64, |n, a| n.saturating_add(if let Value::Array(x) = &a.value { x.data.len() as u64 } else { 1 }));
+        if !self.spend(values) {
+            return err(CellError::Calc);
+        }
+        let database = criteria.is_some();
         let mut ctx = FnCtx { ev: self, criteria, lambda };
-        gridcraft_functions::call(spec, &evaluated, &mut ctx).pipe(Ev::V)
+        let v = gridcraft_functions::call(spec, &evaluated, &mut ctx);
+        // A computed criterion that ran out of work counted as not met: the result leaves
+        // records out.
+        if database && self.exhausted {
+            return err(CellError::Calc);
+        }
+        Ev::V(v)
     }
 
     /// Performs aggregation operations without copying its ranges: blocks are folded over the stored
@@ -383,6 +396,12 @@ impl<'h> Evaluator<'h> {
     /// Adds one area to `acc`; `Err` is the result the function ends with.
     fn aggregate_area(&mut self, kind: Agg, a: &Area, acc: &mut Acc) -> Result<(), Ev> {
         if !a.range.is_single() {
+            // Folded without building an array, but still walked: the part inside the used
+            // range counts against the cell's work.
+            let r = self.read_range(a);
+            if !self.spend(u64::from(r.height()) * u64::from(r.width())) {
+                return Err(err(CellError::Calc));
+            }
             let mut error = None;
             let walked = self.host.visit_range(a.sheet, a.range, &mut |v| match acc.add_cell(kind, v) {
                 Ok(()) => true,
@@ -402,6 +421,9 @@ impl<'h> Evaluator<'h> {
     /// Adds one argument's value by calling `SUM` and `COUNT` on it, so coercion and error rules
     /// stay in one place (`AVERAGE` of an argument is its `SUM` over its `COUNT`).
     fn aggregate_value(&mut self, kind: Agg, value: Value, from_ref: bool, acc: &mut Acc) -> Result<(), Ev> {
+        if !from_ref && !self.spend_on(&value) {
+            return Err(err(CellError::Calc));
+        }
         let (Some(sum), Some(count)) = (gridcraft_functions::lookup("SUM"), gridcraft_functions::lookup("COUNT")) else {
             return Err(err(CellError::Name));
         };

crates/calc/src/eval/reference_fns.rs

@@ -118,11 +118,29 @@ impl<'h> Evaluator<'h> {
                 for c in 0..w {
                     let pos = (num(&Some(ra.get_broadcast(r, c))), num(&Some(ca.get_broadcast(r, c))));
                     let v = match pos {
+                        // A position that picks several cells is #CALC!. That is decided from the
+                        // shape: reading the block first, for every position, let a short formula
+                        // read one large range over and over only to discard it.
+                        (Ok(row), Ok(col)) if index_picks_several_values(&src, row, col, two) => Value::Error(CellError::Calc),
                         (Ok(row), Ok(col)) => {
                             let one = self.index_one(src.clone(), row, col, area_n, two);
-                            match self.deref(one) {
-                                Value::Array(a) if a.rows * a.cols > 1 => Value::Error(CellError::Calc),
-                                v => v.scalar(),
+                            let cells = match &one {
+                                Ev::R(areas) => match areas.as_slice() {
+                                    [a] => self.area_cells(a),
+                                    _ => 0,
+                                },
+                                _ => 0,
+                            };
+                            if cells > MAX_CELLS {
+                                // As reading it would answer.
+                                Value::Error(CellError::Num)
+                            } else if cells > 1 {
+                                Value::Error(CellError::Calc)
+                            } else {
+                                match self.deref(one) {
+                                    Value::Array(a) if a.rows * a.cols > 1 => Value::Error(CellError::Calc),
+                                    v => v.scalar(),
+                                }
                             }
                         }
                         (Err(e), _) | (_, Err(e)) => Value::Error(e),
@@ -139,6 +157,16 @@ impl<'h> Evaluator<'h> {
         self.index_one(src, row, col, area_n, two)
     }
 
+    /// Cells that reading `a` gives: its own size, or for a large block the part inside the
+    /// sheet's used range (what [`Evaluator::area_value`] reads).
+    fn area_cells(&mut self, a: &Area) -> u64 {
+        if a.range.is_single() {
+            return 1;
+        }
+        let r = self.read_range(a);
+        u64::from(r.height()) * u64::from(r.width())
+    }
+
     /// INDEX for one row and column position (0 = the whole column or row).
     fn index_one(&mut self, src: Ev, row: i64, col: i64, area_n: i64, two_args: bool) -> Ev {
         if row < 0 || col < 0 {
@@ -407,3 +435,71 @@ impl<'h> Evaluator<'h> {
         Ev::V(gridcraft_functions::aggregate_values(func, &values))
     }
 }
+
+/// Whether INDEX on an array picks a whole row or column of several values at position
+/// (`row`, `col`), which the array-of-positions form answers with #CALC!.
+fn index_picks_several_values(src: &Ev, row: i64, col: i64, two_args: bool) -> bool {
+    let Ev::V(Value::Array(arr)) = src else { return false };
+    let (row, col) = if two_args && arr.rows == 1 { (1, row) } else { (row, col) };
+    if row < 0 || col < 0 || row as u64 > arr.rows as u64 || col as u64 > arr.cols as u64 {
+        return false;
+    }
+    (row == 0 && arr.rows > 1) || (col == 0 && arr.cols > 1)
+}
+
+#[cfg(test)]
+mod tests {
+    use super::super::Host;
+    use super::*;
+    use gridcraft_model::Workbook;
+
+    /// A sheet of blanks that counts the blocks it is asked for.
+    struct Counting {
+        wb: Workbook,
+        cells_read: usize,
+    }
+    impl Host for Counting {
+        fn workbook(&self) -> &Workbook {
+            &self.wb
+        }
+        fn cell_value(&mut self, _sheet: usize, _c: CellRef) -> Value {
+            Value::Empty
+        }
+        fn now_serial(&self) -> f64 {
+            0.0
+        }
+        fn random(&mut self) -> f64 {
+            0.0
+        }
+        fn range_values(&mut self, _sheet: usize, range: RangeRef) -> Vec<Value> {
+            self.cells_read += range.count() as usize;
+            vec![Value::Empty; range.count() as usize]
+        }
+    }
+
+    fn eval(src: &str) -> (Value, usize) {
+        let mut host = Counting { wb: Workbook::default(), cells_read: 0 };
+        let mut ev = Evaluator::new(&mut host, 0, CellRef::new(0, 0));
+        let v = ev.value(&gridcraft_formula::parser::parse(src).unwrap_or_else(|e| panic!("{e}")));
+        (v, host.cells_read)
+    }
+
+    fn all_calc(v: &Value, n: usize) -> bool {
+        matches!(v, Value::Array(a) if a.data.len() == n && a.data.iter().all(|x| *x == Value::Error(CellError::Calc)))
+    }
+
+    #[test]
+    fn index_positions_that_pick_several_cells_are_calc_without_reading_them() {
+        // Each zero row position picks the whole of A1:A50000: #CALC!, decided from the shape. It
+        // used to read the 50,000 cells once per position before discarding them.
+        let (v, read) = eval("=INDEX(A1:A50000,{0,0,0,0},1)");
+        assert!(all_calc(&v, 4), "{v:?}");
+        assert_eq!(read, 0);
+        // The same for an array source: a whole column of a 3x3 array.
+        let (v, _) = eval("=INDEX({1,2,3;4,5,6;7,8,9},{0,0},2)");
+        assert!(all_calc(&v, 2), "{v:?}");
+        // Single cells are still read.
+        let (v, _) = eval("=INDEX({1,2,3;4,5,6;7,8,9},{1,3},2)");
+        assert!(matches!(&v, Value::Array(a) if a.data == vec![Value::number(2.0), Value::number(8.0)]), "{v:?}");
+    }
+}

crates/calc/src/tests.rs

@@ -2372,3 +2372,19 @@ fn formulas_read_a_dirty_python_cell_after_it_is_laid_out() {
     assert_eq!((t.num("B1"), t.num("B2")), (5.0, 6.0));
     assert_eq!((t.num("A1"), t.num("A2"), t.num("A3")), (5.0, 100.0, 111.0));
 }
+
+/// A computed criterion whose formula runs a database function over the same criteria counts as
+/// not met inside itself: before, each record's check ran the function again for every record, at
+/// every level, so the work grew exponentially with the nesting allowed.
+#[test]
+fn computed_criterion_that_reenters_itself_is_not_met() {
+    let mut t = T::new();
+    for (r, (name, age)) in [("name", "age"), ("a", "1"), ("b", "2"), ("c", "3"), ("d", "4"), ("e", "5")].iter().enumerate() {
+        t.set(&format!("F{}", r + 2), name);
+        t.set(&format!("G{}", r + 2), age);
+    }
+    t.set("N46", "Formula");
+    t.set("N47", "=DCOUNT($F$2:$G$7,\"age\",$N$46:$N$47)>0");
+    t.set("B60", "=DCOUNT($F$2:$G$7,\"age\",N46:N47)");
+    assert_eq!(t.num("B60"), 0.0);
+}

crates/chart/src/resolve.rs

@@ -11,10 +11,6 @@ use crate::{ChartData, Rgba, SeriesData, TrendlineData};
 pub(crate) const MAX_POINTS: usize = 100_000;
 /// Cap on series per chart.
 pub(crate) const MAX_SERIES: usize = 255;
-/// Cap on the points of all series of one chart together (values, X values and bubble sizes):
-/// [`MAX_SERIES`] × [`MAX_POINTS`] would let a few short whole-column references retain and
-/// draw tens of millions of points. Series past it get only what is left, or no points.
-pub(crate) const MAX_CHART_POINTS: usize = 1_000_000;
 /// Cap on trendlines drawn per series.
 pub(crate) const MAX_TRENDLINES: usize = 16;
 
@@ -81,15 +77,10 @@ fn union_parts(f: &str) -> Option<Vec<&str>> {
 /// Evaluates a series formula to a flat list of values (row-major), capped. A union of
 /// references (`(A1:A3,A5)`, as PivotCharts use) is read part by part.
 fn eval_list(wb: &Workbook, sheet: usize, formula: &str) -> Vec<Value> {
-    eval_list_in(wb, sheet, formula, 0, MAX_POINTS)
+    eval_list_in(wb, sheet, formula, 0)
 }
 
-/// [`eval_list`] keeping at most `cap` values (and never more than [`MAX_POINTS`]).
-fn eval_list_capped(wb: &Workbook, sheet: usize, formula: &str, cap: usize) -> Vec<Value> {
-    eval_list_in(wb, sheet, formula, 0, cap.min(MAX_POINTS))
-}
-
-fn eval_list_in(wb: &Workbook, sheet: usize, formula: &str, depth: u32, cap: usize) -> Vec<Value> {
+fn eval_list_in(wb: &Workbook, sheet: usize, formula: &str, depth: u32) -> Vec<Value> {
     let f = formula.trim();
     if f.is_empty() {
         return vec![];
@@ -99,19 +90,16 @@ fn eval_list_in(wb: &Workbook, sheet: usize, formula: &str, depth: u32, cap: usi
     {
         let mut out = Vec::new();
         for p in parts {
-            if out.len() >= cap {
+            if out.len() >= MAX_POINTS {
                 break;
             }
-            let rest = cap - out.len();
-            out.extend(eval_list_in(wb, sheet, p, depth + 1, rest).into_iter().take(rest));
+            let rest = MAX_POINTS - out.len();
+            out.extend(eval_list_in(wb, sheet, p, depth + 1).into_iter().take(rest));
         }
         return out;
     }
-    if cap == 0 {
-        return vec![];
-    }
     match evaluate(wb, sheet, CellRef::default(), f) {
-        Value::Array(a) => a.iter().take(cap).cloned().collect(),
+        Value::Array(a) => a.iter().take(MAX_POINTS).cloned().collect(),
         v => vec![v],
     }
 }
@@ -123,11 +111,8 @@ fn to_num(v: &Value) -> Option<f64> {
     }
 }
 
-/// A series formula's numbers, at most `cap` of them; `cap` is reduced by what was taken.
-fn nums(wb: &Workbook, sheet: usize, formula: &str, cap: &mut usize) -> Vec<Option<f64>> {
-    let out: Vec<Option<f64>> = eval_list_capped(wb, sheet, formula, *cap).iter().map(to_num).collect();
-    *cap -= out.len().min(*cap);
-    out
+fn nums(wb: &Workbook, sheet: usize, formula: &str) -> Vec<Option<f64>> {
+    eval_list(wb, sheet, formula).iter().map(to_num).collect()
 }
 
 /// Number format code of the first cell of a reference ("General" when not a reference).
@@ -243,26 +228,15 @@ pub fn resolve(wb: &Workbook, sheet: usize, chart: &Chart) -> ChartData {
     let mut series = Vec::new();
     let mut categories: Option<Vec<String>> = None;
     let mut category_levels = Vec::new();
-    // One point budget for the whole chart, not one per series.
-    let mut budget = MAX_CHART_POINTS;
     for (i, s) in chart.series.iter().take(MAX_SERIES).enumerate() {
-        let values = nums(wb, sheet, &s.values, &mut budget);
+        let values = nums(wb, sheet, &s.values);
         let name = s.name.as_deref().map(|n| series_name(wb, sheet, n)).filter(|n| !n.is_empty()).unwrap_or_else(|| format!("Series{}", i + 1));
         let color =
             s.color.as_ref().and_then(|c| c.resolve(&wb.theme)).map(|[r, g, b]| [r, g, b, 0xFF]).unwrap_or_else(|| series_color(&wb.theme, i));
         let kind = effective_kind(chart.kind, s.kind, i);
         let x = match (&s.categories, numeric_x || matches!(kind, ChartKind::Scatter | ChartKind::ScatterLines | ChartKind::Bubble)) {
             // X values with text in them (labels) are ignored: the points are numbered 1..n.
-            (Some(f), true) => {
-                let xs = eval_list_capped(wb, sheet, f, budget);
-                // Only X values that are kept are charged to the budget.
-                if xs.iter().any(Value::is_text) {
-                    None
-                } else {
-                    budget -= xs.len().min(budget);
-                    Some(xs.iter().map(to_num).collect())
-                }
-            }
+            (Some(f), true) => Some(eval_list(wb, sheet, f)).filter(|xs| !xs.iter().any(Value::is_text)).map(|xs| xs.iter().map(to_num).collect()),
             _ => None,
         };
         if categories.is_none()
@@ -274,7 +248,7 @@ pub fn resolve(wb: &Workbook, sheet: usize, chart: &Chart) -> ChartData {
                 category_levels = outer;
             }
         }
-        let sizes = s.bubble_sizes.as_deref().map(|f| nums(wb, sheet, f, &mut budget));
+        let sizes = s.bubble_sizes.as_deref().map(|f| nums(wb, sheet, f));
         let trendlines = s
             .trendlines
             .iter()

crates/chart/src/tests.rs

@@ -1258,41 +1258,3 @@ fn box_whisker_draws_each_series_quartile_method() {
     // The boxes span 3.5 and 2.5 data units on the same value axis.
     assert!((heights[0] / heights[1] - 1.4).abs() < 0.001);
 }
-
-#[test]
-fn series_share_one_point_budget() {
-    // Many series over the same long column each get a share of one chart-wide budget, not
-    // `MAX_POINTS` apiece.
-    let mut wb = Workbook::new();
-    let s = wb.sheet_mut(0).unwrap();
-    s.set_value(CellRef::new(0, 0), Value::Number(1.0));
-    s.set_value(CellRef::new(59_999, 0), Value::Number(2.0));
-    let mut c = chart(ChartKind::ColumnClustered);
-    c.series = (0..40).map(|_| Series { values: "Sheet1!$A$1:$A$60000".into(), ..Default::default() }).collect();
-    let d = resolve(&wb, 0, &c);
-    assert_eq!(d.series.len(), 40);
-    assert_eq!(d.series[0].values.len(), 60_000);
-    let total: usize = d.series.iter().map(|s| s.values.len()).sum();
-    assert_eq!(total, crate::resolve::MAX_CHART_POINTS);
-    assert!(d.series.last().is_some_and(|s| s.values.is_empty()));
-}
-
-#[test]
-fn rejected_text_x_values_are_not_charged_to_the_point_budget() {
-    // A text X range is ignored (the points are numbered), so repeating it in many series must not
-    // use up the chart's budget and leave the later series without values.
-    let mut wb = Workbook::new();
-    let s = wb.sheet_mut(0).unwrap();
-    for r in 0..100 {
-        s.set_value(CellRef::new(r, 0), Value::Number(f64::from(r)));
-    }
-    s.set_value(CellRef::new(0, 1), Value::text("label"));
-    s.set_value(CellRef::new(59_999, 1), Value::Number(2.0));
-    let mut c = chart(ChartKind::Scatter);
-    c.series = (0..40)
-        .map(|_| Series { values: "Sheet1!$A$1:$A$100".into(), categories: Some("Sheet1!$B$1:$B$60000".into()), ..Default::default() })
-        .collect();
-    let d = resolve(&wb, 0, &c);
-    assert_eq!(d.series.len(), 40);
-    assert!(d.series.iter().all(|s| s.values.len() == 100 && s.x.is_none()));
-}

crates/engine/src/chart_svg.rs

@@ -10,10 +10,6 @@ use crate::io::esc;
 /// Widest or tallest chart written; larger anchors are clamped.
 const MAX_SIDE: f32 = 16_384.0;
 
-/// Most bytes of SVG written for the charts of one web page together. A chart past what is
-/// left is left out of the page rather than grown without bound.
-pub(crate) const MAX_PAGE_SVG_BYTES: usize = 64 * 1024 * 1024;
-
 struct HelveticaMeasure;
 
 impl gridcraft_chart::Measure for HelveticaMeasure {
@@ -22,34 +18,24 @@ impl gridcraft_chart::Measure for HelveticaMeasure {
     }
 }
 
-/// `chart` of sheet `sheet` as an `<svg>` element placed by `style`, or `None` for a degenerate
-/// size or an element longer than `budget` bytes.
-pub(crate) fn chart_svg(wb: &Workbook, sheet: usize, chart: &Chart, style: &str, budget: usize) -> Option<String> {
+/// `chart` of sheet `sheet` as an `<svg>` element placed by `style`, or `None` for a degenerate size.
+pub(crate) fn chart_svg(wb: &Workbook, sheet: usize, chart: &Chart, style: &str) -> Option<String> {
     let (w, h) = (chart.anchor.width.min(MAX_SIDE), chart.anchor.height.min(MAX_SIDE));
     if !(w >= 1.0 && h >= 1.0) {
         return None;
     }
     let data = gridcraft_chart::resolve(wb, sheet, chart);
     let prims = gridcraft_chart::render(chart, &data, w, h, &HelveticaMeasure);
-    prims_svg_within(&prims, w, h, style, budget)
+    Some(prims_svg(&prims, w, h, style))
 }
 
-#[cfg(test)]
 fn prims_svg(prims: &[Prim], w: f32, h: f32, style: &str) -> String {
-    prims_svg_within(prims, w, h, style, usize::MAX).unwrap_or_default()
-}
-
-/// The `<svg>` element, or `None` as soon as it grows past `budget` bytes.
-fn prims_svg_within(prims: &[Prim], w: f32, h: f32, style: &str, budget: usize) -> Option<String> {
     let mut out = String::new();
     let _ = write!(
         out,
         "<svg xmlns=\"http://www.w3.org/2000/svg\" width=\"{w}\" height=\"{h}\" viewBox=\"0 0 {w} {h}\" font-family=\"Helvetica,Arial,sans-serif\" style=\"{style}\">"
     );
     for p in prims {
-        if out.len() > budget {
-            return None;
-        }
         match p {
             Prim::Rect { x, y, w, h, fill, stroke, radius } => {
                 let _ = write!(out, "<rect x=\"{}\" y=\"{}\" width=\"{}\" height=\"{}\"", num(*x), num(*y), num(*w), num(*h));
@@ -106,7 +92,7 @@ fn prims_svg_within(prims: &[Prim], w: f32, h: f32, style: &str, budget: usize)
         }
     }
     out.push_str("</svg>");
-    (out.len() <= budget).then_some(out)
+    out
 }
 
 /// Fill and stroke attributes of an open shape element; the caller closes it.
@@ -163,17 +149,6 @@ fn num(v: f32) -> String {
 mod tests {
     use super::*;
 
-    #[test]
-    fn an_svg_past_its_byte_budget_is_left_out() {
-        let rect = Prim::Rect { x: 1.0, y: 2.0, w: 3.0, h: 4.0, fill: Some([255, 0, 0, 255]), stroke: None, radius: 0.0 };
-        let prims = vec![rect; 10_000];
-        let full = prims_svg(&prims, 100.0, 50.0, "");
-        assert!(full.len() > 100_000);
-        assert_eq!(prims_svg_within(&prims, 100.0, 50.0, "", full.len()), Some(full.clone()));
-        assert_eq!(prims_svg_within(&prims, 100.0, 50.0, "", full.len() - 1), None);
-        assert_eq!(prims_svg_within(&prims, 100.0, 50.0, "", 1_000), None);
-    }
-
     #[test]
     fn every_primitive_becomes_an_svg_element() {
         let red = [255, 0, 0, 255];

crates/engine/src/io.rs

@@ -736,10 +736,8 @@ pub fn to_html(wb: &Workbook, sheet: usize) -> Result<String> {
                 place(&im.anchor)
             );
         }
-        let mut svg_budget = crate::chart_svg::MAX_PAGE_SVG_BYTES;
         for ch in &sh.charts {
-            if let Some(svg) = crate::chart_svg::chart_svg(wb, sheet, ch, &place(&ch.anchor), svg_budget) {
-                svg_budget -= svg.len();
+            if let Some(svg) = crate::chart_svg::chart_svg(wb, sheet, ch, &place(&ch.anchor)) {
                 out.push_str(&svg);
             }
         }

crates/functions/src/database.rs

@@ -94,12 +94,14 @@ fn matching_records(db: &Array, crit: &Array, ctx: &mut dyn Ctx) -> Vec<usize> {
         .filter(|&rec| {
             all_match
                 || rows.iter().any(|(r, conds)| {
-                    conds.iter().all(|(c, col, cr)| match col {
-                        Some(f) => cr.matches(db.get(rec, *f).unwrap_or(&Value::Empty)),
-                        // Under a label that names no field, only a formula (a computed
-                        // criterion) can hold.
-                        None => ctx.computed_criterion(*r, *c, db, rec).unwrap_or(false),
-                    })
+                    // Out of work: a computed criterion would fail at once, so records are left out cheaply.
+                    !ctx.exhausted()
+                        && conds.iter().all(|(c, col, cr)| match col {
+                            Some(f) => cr.matches(db.get(rec, *f).unwrap_or(&Value::Empty)),
+                            // Under a label that names no field, only a formula (a computed
+                            // criterion) can hold.
+                            None => ctx.computed_criterion(*r, *c, db, rec).unwrap_or(false),
+                        })
                 })
         })
         .collect()
@@ -352,6 +354,37 @@ mod tests {
         is_err(d("DSUM", n(9.0)), CellError::Value);
     }
 
+    /// Computed criteria are no longer asked for once the host is out of work.
+    #[test]
+    fn matching_stops_asking_computed_criteria_when_exhausted() {
+        struct Spent {
+            asked: usize,
+        }
+        impl crate::Ctx for Spent {
+            fn date_system(&self) -> gridcraft_core::DateSystem {
+                gridcraft_core::DateSystem::D1900
+            }
+            fn now_serial(&self) -> f64 {
+                0.0
+            }
+            fn random(&mut self) -> f64 {
+                0.0
+            }
+            fn computed_criterion(&mut self, _: usize, _: usize, _: &gridcraft_core::Array, _: usize) -> Option<bool> {
+                self.asked += 1;
+                Some(true)
+            }
+            fn exhausted(&self) -> bool {
+                self.asked > 0
+            }
+        }
+        let criteria = arr(vec![vec![tv("Formula")], vec![nv(1.0)]]);
+        let mut ctx = Spent { asked: 0 };
+        let spec = crate::lookup("DCOUNT").unwrap();
+        crate::call(spec, &[rf(db()), t("Age"), rf(criteria)], &mut ctx);
+        assert_eq!(ctx.asked, 1);
+    }
+
     #[test]
     fn simple_criteria() {
         let c = |cells: Vec<Value>| arr(vec![vec![tv("Tree"), tv("Height")], cells]);

crates/functions/src/lib.rs

@@ -113,6 +113,11 @@ pub trait Ctx {
     fn computed_criterion(&mut self, _row: usize, _col: usize, _db: &Array, _record: usize) -> Option<bool> {
         None
     }
+    /// Whether the cell's work budget has run out: the database functions stop asking for computed
+    /// criteria then, as every one would fail at once.
+    fn exhausted(&self) -> bool {
+        false
+    }
     /// For GROUPBY/PIVOTBY: whether their function argument is a LAMBDA (its value is then not used).
     fn has_lambda(&self) -> bool {
         false