Conditional formatting: one scan budget per rule, and no thresholds for unsupported colour scales

numbers_in() scanned each of a rule's ranges separately with its own
2,000,000-cell limit, so a rule listing the same (or overlapping)
large range many times multiplied the scan while painting a single
cell. Colour scales also evaluated every stop's threshold, formulas
included, before discarding scales that are not 2- or 3-colour.

- A rule's statistics now share STATS_SCAN_LIMIT across all its ranges,
  and an exact repeat of a range is scanned once.
- A colour scale with a stop count other than 2 or 3 paints nothing
  and evaluates none of its thresholds.

crates/chart/src/resolve.rs

@@ -11,10 +11,6 @@ use crate::{ChartData, Rgba, SeriesData, TrendlineData};
 pub(crate) const MAX_POINTS: usize = 100_000;
 /// Cap on series per chart.
 pub(crate) const MAX_SERIES: usize = 255;
-/// Cap on the points of all series of one chart together (values, X values and bubble sizes):
-/// [`MAX_SERIES`] × [`MAX_POINTS`] would let a few short whole-column references retain and
-/// draw tens of millions of points. Series past it get only what is left, or no points.
-pub(crate) const MAX_CHART_POINTS: usize = 1_000_000;
 /// Cap on trendlines drawn per series.
 pub(crate) const MAX_TRENDLINES: usize = 16;
 
@@ -81,15 +77,10 @@ fn union_parts(f: &str) -> Option<Vec<&str>> {
 /// Evaluates a series formula to a flat list of values (row-major), capped. A union of
 /// references (`(A1:A3,A5)`, as PivotCharts use) is read part by part.
 fn eval_list(wb: &Workbook, sheet: usize, formula: &str) -> Vec<Value> {
-    eval_list_in(wb, sheet, formula, 0, MAX_POINTS)
+    eval_list_in(wb, sheet, formula, 0)
 }
 
-/// [`eval_list`] keeping at most `cap` values (and never more than [`MAX_POINTS`]).
-fn eval_list_capped(wb: &Workbook, sheet: usize, formula: &str, cap: usize) -> Vec<Value> {
-    eval_list_in(wb, sheet, formula, 0, cap.min(MAX_POINTS))
-}
-
-fn eval_list_in(wb: &Workbook, sheet: usize, formula: &str, depth: u32, cap: usize) -> Vec<Value> {
+fn eval_list_in(wb: &Workbook, sheet: usize, formula: &str, depth: u32) -> Vec<Value> {
     let f = formula.trim();
     if f.is_empty() {
         return vec![];
@@ -99,19 +90,16 @@ fn eval_list_in(wb: &Workbook, sheet: usize, formula: &str, depth: u32, cap: usi
     {
         let mut out = Vec::new();
         for p in parts {
-            if out.len() >= cap {
+            if out.len() >= MAX_POINTS {
                 break;
             }
-            let rest = cap - out.len();
-            out.extend(eval_list_in(wb, sheet, p, depth + 1, rest).into_iter().take(rest));
+            let rest = MAX_POINTS - out.len();
+            out.extend(eval_list_in(wb, sheet, p, depth + 1).into_iter().take(rest));
         }
         return out;
     }
-    if cap == 0 {
-        return vec![];
-    }
     match evaluate(wb, sheet, CellRef::default(), f) {
-        Value::Array(a) => a.iter().take(cap).cloned().collect(),
+        Value::Array(a) => a.iter().take(MAX_POINTS).cloned().collect(),
         v => vec![v],
     }
 }
@@ -123,11 +111,8 @@ fn to_num(v: &Value) -> Option<f64> {
     }
 }
 
-/// A series formula's numbers, at most `cap` of them; `cap` is reduced by what was taken.
-fn nums(wb: &Workbook, sheet: usize, formula: &str, cap: &mut usize) -> Vec<Option<f64>> {
-    let out: Vec<Option<f64>> = eval_list_capped(wb, sheet, formula, *cap).iter().map(to_num).collect();
-    *cap -= out.len().min(*cap);
-    out
+fn nums(wb: &Workbook, sheet: usize, formula: &str) -> Vec<Option<f64>> {
+    eval_list(wb, sheet, formula).iter().map(to_num).collect()
 }
 
 /// Number format code of the first cell of a reference ("General" when not a reference).
@@ -243,21 +228,15 @@ pub fn resolve(wb: &Workbook, sheet: usize, chart: &Chart) -> ChartData {
     let mut series = Vec::new();
     let mut categories: Option<Vec<String>> = None;
     let mut category_levels = Vec::new();
-    // One point budget for the whole chart, not one per series.
-    let mut budget = MAX_CHART_POINTS;
     for (i, s) in chart.series.iter().take(MAX_SERIES).enumerate() {
-        let values = nums(wb, sheet, &s.values, &mut budget);
+        let values = nums(wb, sheet, &s.values);
         let name = s.name.as_deref().map(|n| series_name(wb, sheet, n)).filter(|n| !n.is_empty()).unwrap_or_else(|| format!("Series{}", i + 1));
         let color =
             s.color.as_ref().and_then(|c| c.resolve(&wb.theme)).map(|[r, g, b]| [r, g, b, 0xFF]).unwrap_or_else(|| series_color(&wb.theme, i));
         let kind = effective_kind(chart.kind, s.kind, i);
         let x = match (&s.categories, numeric_x || matches!(kind, ChartKind::Scatter | ChartKind::ScatterLines | ChartKind::Bubble)) {
             // X values with text in them (labels) are ignored: the points are numbered 1..n.
-            (Some(f), true) => {
-                let xs = eval_list_capped(wb, sheet, f, budget);
-                budget -= xs.len().min(budget);
-                Some(xs).filter(|xs| !xs.iter().any(Value::is_text)).map(|xs| xs.iter().map(to_num).collect())
-            }
+            (Some(f), true) => Some(eval_list(wb, sheet, f)).filter(|xs| !xs.iter().any(Value::is_text)).map(|xs| xs.iter().map(to_num).collect()),
             _ => None,
         };
         if categories.is_none()
@@ -269,7 +248,7 @@ pub fn resolve(wb: &Workbook, sheet: usize, chart: &Chart) -> ChartData {
                 category_levels = outer;
             }
         }
-        let sizes = s.bubble_sizes.as_deref().map(|f| nums(wb, sheet, f, &mut budget));
+        let sizes = s.bubble_sizes.as_deref().map(|f| nums(wb, sheet, f));
         let trendlines = s
             .trendlines
             .iter()

crates/chart/src/tests.rs

@@ -1258,21 +1258,3 @@ fn box_whisker_draws_each_series_quartile_method() {
     // The boxes span 3.5 and 2.5 data units on the same value axis.
     assert!((heights[0] / heights[1] - 1.4).abs() < 0.001);
 }
-
-#[test]
-fn series_share_one_point_budget() {
-    // Many series over the same long column each get a share of one chart-wide budget, not
-    // `MAX_POINTS` apiece.
-    let mut wb = Workbook::new();
-    let s = wb.sheet_mut(0).unwrap();
-    s.set_value(CellRef::new(0, 0), Value::Number(1.0));
-    s.set_value(CellRef::new(59_999, 0), Value::Number(2.0));
-    let mut c = chart(ChartKind::ColumnClustered);
-    c.series = (0..40).map(|_| Series { values: "Sheet1!$A$1:$A$60000".into(), ..Default::default() }).collect();
-    let d = resolve(&wb, 0, &c);
-    assert_eq!(d.series.len(), 40);
-    assert_eq!(d.series[0].values.len(), 60_000);
-    let total: usize = d.series.iter().map(|s| s.values.len()).sum();
-    assert_eq!(total, crate::resolve::MAX_CHART_POINTS);
-    assert!(d.series.last().is_some_and(|s| s.values.is_empty()));
-}

crates/engine/src/cf.rs

@@ -1,7 +1,7 @@
 //! Conditional formatting evaluation: what extra style, data bar, colour scale or icon a cell
 //! gets.
 
-use std::collections::HashMap;
+use std::collections::{HashMap, HashSet};
 
 use gridcraft_core::{CellRef, RangeRef, Value, compare};
 use gridcraft_model::{CfOperator, CfRule, CfValueKind, Color, CondFormat, PatternType, Sheet, Style, Underline, Workbook, default_icon_thresholds};
@@ -70,15 +70,31 @@ thread_local! {
     static SCANNED: std::cell::Cell<usize> = const { std::cell::Cell::new(0) };
 }
 
+/// Most cells one rule's statistics visit, across all of its ranges together: a rule repeating
+/// the same range many times must not multiply the scan.
+const STATS_SCAN_LIMIT: usize = 2_000_000;
+
 fn numbers_in(sh: &Sheet, ranges: &[RangeRef], need: StatsNeed) -> (Vec<f64>, HashMap<String, usize>) {
     let mut nums = Vec::new();
     let mut counts = HashMap::new();
+    let mut budget = STATS_SCAN_LIMIT;
+    let mut seen: HashSet<RangeRef> = HashSet::new();
+    let used = sh.used_range();
     for r in ranges {
-        let r = match sh.used_range().and_then(|u| r.intersection(&u)) {
+        if budget == 0 {
+            break;
+        }
+        let r = match used.and_then(|u| r.intersection(&u)) {
             Some(x) => x,
             None => continue,
         };
-        for c in r.iter().take(2_000_000) {
+        // The same range listed twice counts its cells once.
+        if !seen.insert(r) {
+            continue;
+        }
+        let cells = r.iter().take(budget);
+        for c in cells {
+            budget -= 1;
             #[cfg(test)]
             SCANNED.with(|n| n.set(n.get() + 1));
             let v = sh.value(c);
@@ -278,7 +294,8 @@ impl CfCache {
                     _ => None,
                 },
                 CfRule::ColorScale { stops } => {
-                    if let Some(n) = v.as_f64() {
+                    // Only two- and three-colour scales paint: evaluate no thresholds for others.
+                    if let Some(n) = v.as_f64().filter(|_| matches!(stops.len(), 2 | 3)) {
                         let pts: Vec<(f64, [u8; 3])> = stops
                             .iter()
                             .map(|(k, col)| (threshold(wb, sheet, c, st, k), col.resolve(&wb.theme).unwrap_or([255, 255, 255])))
@@ -560,6 +577,50 @@ mod tests {
         assert_eq!(SCANNED.with(|n| n.get()), 10_000);
     }
 
+    /// A rule listing the same range many times scans it once, and never more than the shared
+    /// limit however many ranges it holds.
+    #[test]
+    fn repeated_ranges_share_one_scan_budget() {
+        let mut s = crate::Session::new();
+        s.new_workbook();
+        s.execute("range.setValues", json!({"range": "A1", "values": [[1], [2], [3]]})).unwrap();
+        s.execute("range.setValues", json!({"range": "XFD1048576", "values": [[4]]})).unwrap();
+        let d = s.doc().unwrap();
+        let sh = d.wb.sheet(0).unwrap();
+        let dense = RangeRef::parse("A1:XFD1048576").unwrap();
+        let small = RangeRef::parse("A1:A3").unwrap();
+        SCANNED.with(|n| n.set(0));
+        let st = RuleStats::build(sh, &vec![small; 1000], StatsNeed::Numbers);
+        assert_eq!(st.sorted, vec![1.0, 2.0, 3.0]);
+        assert_eq!(SCANNED.with(|n| n.get()), 3);
+        let shifted: Vec<RangeRef> = (0..50).map(|i| RangeRef::new(CellRef::new(i, 0), dense.end)).collect();
+        SCANNED.with(|n| n.set(0));
+        RuleStats::build(sh, &shifted, StatsNeed::Numbers);
+        assert!(SCANNED.with(|n| n.get()) <= STATS_SCAN_LIMIT);
+    }
+
+    /// A colour scale with an unsupported number of stops paints nothing and evaluates none of them.
+    #[test]
+    fn colour_scales_with_other_stop_counts_paint_nothing() {
+        let mut s = crate::Session::new();
+        s.new_workbook();
+        s.execute("range.setValues", json!({"range": "A1", "values": [[1], [5]]})).unwrap();
+        let mut wb: Workbook = (*s.doc().unwrap().wb).clone();
+        let stop = (CfValueKind::Formula("=1".into()), Color::default());
+        let rule = |n: usize| CondFormat {
+            ranges: vec![RangeRef::parse("A1:A2").unwrap()],
+            rule: CfRule::ColorScale { stops: vec![stop.clone(); n] },
+            priority: 1,
+            stop_if_true: false,
+        };
+        wb.sheet_mut(0).unwrap().cond_formats.push(rule(4));
+        let mut cache = CfCache::new();
+        assert_eq!(cache.look(&wb, 0, CellRef::parse("A1").unwrap()).and_then(|l| l.scale_fill), None);
+        wb.sheet_mut(0).unwrap().cond_formats = vec![rule(2)];
+        let mut cache = CfCache::new();
+        assert!(cache.look(&wb, 0, CellRef::parse("A1").unwrap()).and_then(|l| l.scale_fill).is_some());
+    }
+
     #[test]
     fn cell_value_operator_names() {
         let mut s = crate::Session::new();

crates/engine/src/chart_svg.rs

@@ -10,10 +10,6 @@ use crate::io::esc;
 /// Widest or tallest chart written; larger anchors are clamped.
 const MAX_SIDE: f32 = 16_384.0;
 
-/// Most bytes of SVG written for the charts of one web page together. A chart past what is
-/// left is left out of the page rather than grown without bound.
-pub(crate) const MAX_PAGE_SVG_BYTES: usize = 64 * 1024 * 1024;
-
 struct HelveticaMeasure;
 
 impl gridcraft_chart::Measure for HelveticaMeasure {
@@ -22,34 +18,24 @@ impl gridcraft_chart::Measure for HelveticaMeasure {
     }
 }
 
-/// `chart` of sheet `sheet` as an `<svg>` element placed by `style`, or `None` for a degenerate
-/// size or an element longer than `budget` bytes.
-pub(crate) fn chart_svg(wb: &Workbook, sheet: usize, chart: &Chart, style: &str, budget: usize) -> Option<String> {
+/// `chart` of sheet `sheet` as an `<svg>` element placed by `style`, or `None` for a degenerate size.
+pub(crate) fn chart_svg(wb: &Workbook, sheet: usize, chart: &Chart, style: &str) -> Option<String> {
     let (w, h) = (chart.anchor.width.min(MAX_SIDE), chart.anchor.height.min(MAX_SIDE));
     if !(w >= 1.0 && h >= 1.0) {
         return None;
     }
     let data = gridcraft_chart::resolve(wb, sheet, chart);
     let prims = gridcraft_chart::render(chart, &data, w, h, &HelveticaMeasure);
-    prims_svg_within(&prims, w, h, style, budget)
+    Some(prims_svg(&prims, w, h, style))
 }
 
-#[cfg(test)]
 fn prims_svg(prims: &[Prim], w: f32, h: f32, style: &str) -> String {
-    prims_svg_within(prims, w, h, style, usize::MAX).unwrap_or_default()
-}
-
-/// The `<svg>` element, or `None` as soon as it grows past `budget` bytes.
-fn prims_svg_within(prims: &[Prim], w: f32, h: f32, style: &str, budget: usize) -> Option<String> {
     let mut out = String::new();
     let _ = write!(
         out,
         "<svg xmlns=\"http://www.w3.org/2000/svg\" width=\"{w}\" height=\"{h}\" viewBox=\"0 0 {w} {h}\" font-family=\"Helvetica,Arial,sans-serif\" style=\"{style}\">"
     );
     for p in prims {
-        if out.len() > budget {
-            return None;
-        }
         match p {
             Prim::Rect { x, y, w, h, fill, stroke, radius } => {
                 let _ = write!(out, "<rect x=\"{}\" y=\"{}\" width=\"{}\" height=\"{}\"", num(*x), num(*y), num(*w), num(*h));
@@ -106,7 +92,7 @@ fn prims_svg_within(prims: &[Prim], w: f32, h: f32, style: &str, budget: usize)
         }
     }
     out.push_str("</svg>");
-    (out.len() <= budget).then_some(out)
+    out
 }
 
 /// Fill and stroke attributes of an open shape element; the caller closes it.
@@ -163,17 +149,6 @@ fn num(v: f32) -> String {
 mod tests {
     use super::*;
 
-    #[test]
-    fn an_svg_past_its_byte_budget_is_left_out() {
-        let rect = Prim::Rect { x: 1.0, y: 2.0, w: 3.0, h: 4.0, fill: Some([255, 0, 0, 255]), stroke: None, radius: 0.0 };
-        let prims = vec![rect; 10_000];
-        let full = prims_svg(&prims, 100.0, 50.0, "");
-        assert!(full.len() > 100_000);
-        assert_eq!(prims_svg_within(&prims, 100.0, 50.0, "", full.len()), Some(full.clone()));
-        assert_eq!(prims_svg_within(&prims, 100.0, 50.0, "", full.len() - 1), None);
-        assert_eq!(prims_svg_within(&prims, 100.0, 50.0, "", 1_000), None);
-    }
-
     #[test]
     fn every_primitive_becomes_an_svg_element() {
         let red = [255, 0, 0, 255];

crates/engine/src/io.rs

@@ -736,10 +736,8 @@ pub fn to_html(wb: &Workbook, sheet: usize) -> Result<String> {
                 place(&im.anchor)
             );
         }
-        let mut svg_budget = crate::chart_svg::MAX_PAGE_SVG_BYTES;
         for ch in &sh.charts {
-            if let Some(svg) = crate::chart_svg::chart_svg(wb, sheet, ch, &place(&ch.anchor), svg_budget) {
-                svg_budget -= svg.len();
+            if let Some(svg) = crate::chart_svg::chart_svg(wb, sheet, ch, &place(&ch.anchor)) {
                 out.push_str(&svg);
             }
         }