Stopping a recording saved the macro with a nested macro.save while a debugged run's undo group could be open on the same workbook. Stopping the run without keeping its changes then deleted the macro that macro.record had reported as saved. Stopping now fails with "Finish or stop the macro first" under macro.record before anything changes, and the recording goes on, as when a save fails for another reason, so stopping again after the run ends saves it.
A recording keeps up to 100,000 commands, and inlined macro and script runs can add more, but a macro holds at most 10,000 steps. Stopping truncated the converted steps to that limit without saying so: dropped counted only the recorder's own overflow, so a 10,005-step recording saved a 10,000-step macro and reported nothing missing. The steps cut at the macro limit are now added to dropped.
Stopping a recording with a name that a macro already has (in any case) saved over that macro's
steps, inputs and description, with only Undo to get them back. A taken name now gets a suffix
("Tidy (2)"), and the save passes replace: false as a backstop.
The catalog went from 274 / 290 to 275 / 291 with View › Macros › Record Macro, and
parity-checklist.md says so, but the ROADMAP.md headline, ui-parity.md and target-app-parity.md
still said 274 / 290 (and 290 catalog ids). They now match, with revision rows.
Stopping Record Actions saves a script into the workbook, which the debugger lock refuses while a
macro there is paused. The refusal came after Record Actions had taken its recording, so the
recording was lost. Stopping is now refused before anything changes, and stopping again after
the run saves the script.
The intro said a macro run rolls everything back on an error, but a step that exports or prints to a path writes the file before a later step can fail, and the Running section says that file stays. The intro now limits the guarantee to workbook changes.
`col("Amount")` read the header through the cell's display text, which is the formula while
Show Formulas is on, so a header such as ="Amo"&"unt" matched nothing. The header is now the
cell's value as formatted, whatever the sheet shows.
A visible workbook-scope name such as `_gc_macro_0_0` matched the storage key and was read as a
macro and removed when the workbook opened. Macro storage is written hidden, so only hidden names
are read back; a person's own name of that shape stays a name.
Stopping a recording converted and saved it against the active workbook. For example, starting a
recording in Book1 and switching to Book2 before stopping saved the macro into Book2, inferred the
input's header and column types from Book2's cells and looked up inlined macros and scripts
there. The recording is now converted and saved against the workbook where it started, and the
active workbook stays active. If that workbook was closed, stopping returns an error and ends the
recording.
Session::execute checked the debugger lock only for top-level undoable commands. A command that is not undoable could run edits as nested commands and skip it: stopping Record Actions while a macro in the same workbook was being debugged saved the script inside the run's undo group, and stopping the run without keeping its changes deleted the script again. The lock now applies at every depth, and only the debugged run's own steps go ahead.
The policy summary said file commands never run in a macro, but File >
Properties runs, and exports and printing run: without a path they only
produce bytes, and with one they need the permission and approval. The
summary now names what is denied and what runs, and the paragraph is
wrapped to the file's line length.
`Name:` read a name only up to the first period, so `Name:Sales.Q1` looked up `Sales` and
treated `Q1` as a method, and a workbook name called Sales.Q1 could not be used in a macro,
alone or as `Name:Sales.Q1.cell(1,1)`.
The name now runs through periods, and the longest defined name or table that exists and ends
at a period (or the end) is used; what follows is read as methods. So `Name:Data.row` is a
name called Data.row, and `Name:Sales.offset(1,0)` still moves Sales. When no name matches,
the error names the text before the first method, and a bad method after a dotted name is
still refused. Tests cover direct resolution, reference parameters, `$ref` and `{{...}}`,
with and without a chained method.
Opening a workbook gave each clashing macro name a suffix by trying " (2)", " (3)"... in turn,
and each try scanned every macro accepted so far. A file with 1,000 macros of the same
255-character name made about 300 million name comparisons.
Load now keeps a set of the names in use (ASCII case-insensitive, as find compares them) and,
for each shortened name and suffix width, the next suffix to try, so each suffix is looked up
about once. The result is unchanged: the smallest free suffix, within the name length limit,
and the renamed macro still passes the final checks. unique_name keeps its signature. A test
opens, saves and reopens 1,000 same-name macros in JSON and xlsx and keeps them all, and
another counts lookups instead of timing them.
An Automate script run while recording was replaced by all of its steps except automate.* ones,
without the policy check that top-level commands get. For example, a script that runs
window.activate or macro.list produced a recorded macro that the runner refused on playback. The
steps of a recorded script run, and of an inlined macro run, now go through the same policy as
top-level commands; refused ones are left out and listed as skipped.
Approvals were stored as (document, FNV-1a hash of the macro's JSON).
FNV-1a is not collision resistant, so a crafted workbook could hold a
harmless macro and a different one with the same hash, and approving
the first would let the second run without asking.
The key is now the macro's canonical JSON text itself (object keys
sorted), so two different macros never share an approval.
macros::hash is replaced by macros::fingerprint.
col("...") always matched against the first row of the range, whatever
its header flag. On an input declared without a header row,
Input.col("Amount") silently picked the first column whose first data
cell read "Amount". After .data, the natural Input.data.col("Amount")
failed, because the first row was then a data row. The header row is
now carried through data, and col("...") is refused with a message when
there is none (an input without a header, a Name: base, or after any
other method).
Opening a workbook accepted a macro whose format version `v` was above MACRO_VERSION. Serde
dropped the fields this build doesn't know, and the next save wrote the reduced macro back
with `v: 2`, so a newer build would read it as a complete version 2 macro.
A version above MACRO_VERSION is now refused by Macro::check_limits, and parse_macro checks
the raw `v` before reading the steps. Such a macro takes the existing per-macro path: it is
left out with the usual single warning (which now names a newer format), and the rest of the
workbook opens. Tests cover JSON and xlsx hidden names, with current and missing versions as
controls.
A macro run while recording was replaced by every command in it, including both branches of an
If and the body of a Repeat, whenever it had no inputs. For example, recording a run of a macro
with an If played back both the then and the else commands without a condition, and commands
using Row, Column or Output failed on playback. The run is now inlined only when the macro has no
inputs, no output and only plain commands (its disabled steps are left out); otherwise it is left
out and listed as skipped.
When a debugged step panicked, the nested execute rolled the run back and dropped the debugger
before advance could reattach the machine, so the caller got "No macro is being debugged"
instead of the failed step. For example, stepping into a step whose command panics lost the
step path and the panic message. advance now sees that the run was already rolled back and
returns the usual failed result with the step error.
The policy denies window.* commands, but the View tab's window commands
are view.*: a macro could run view.newWindow, which adds a window that
the run's rollback doesn't remove, or view.hideWindow and
view.unhideWindow, which change the session's hidden windows.
The policy now denies those three. Arrange All changes nothing in the
engine and Switch Windows only lists windows, so both stay allowed.
is_token looked only at the leading identifier, so on a workbook with a
sheet called Output (or Row, Column, or the name of a declared input),
"Output!A1:B2" was read as the Output token, and the step failed with
"the macro has no output anchor" or "unexpected '!A1:B2'". This hit
reference keys, $ref and {{...}} alike, including references the
recorder writes for other sheets. A base followed by '!' is now a sheet
name, and the text resolves as a plain reference.
The recorder made every unqualified reference relative to the example input, whatever sheet the
step ran on. For example, starting a recording on Sheet1 with B2:C5 selected, activating Sheet2
and setting C4 recorded Input.cell(3,2), so playback wrote Sheet1 instead; a formula entered on
Sheet2 was changed to refer to Sheet1's cells. Each step now keeps the sheet it ran on, and only
references on the input's sheet become tokens.
macro.debug runs a macro one step at a time. start checks the macro as
macro.run does (policy, approval, inputs, footprint and output rule)
and pauses before the first step; step runs one step; continue runs to
the next breakpoint; runTo runs to a chosen step path, stopping at
breakpoints on the way; stop ends the run and keeps its changes or
rolls them back; state reports where it is. Breakpoints are the steps'
own flags plus a list of paths given with any action (breakpointsOnly
makes the list replace the flags), and they stop in every pass of a
Repeat.
The run lives on the session between calls, inside an undo group that
spans them (group_begin and group_end), so a debugged run is one undo
step "Run Macro: <name>", as a normal run is. A failing step ends the
run and rolls it back; so does a Stop step that asks for a rollback.
While a macro is being debugged, edits of the workbooks the run touched
(its own, and any other a step changed) are refused at the top level
with "Finish or stop the macro first"; other workbooks stay editable,
and selecting and queries still work. Every answer gives the next
step's path, kind, command, parameters as they would run now (tokens
resolved), the Repeat pass, the parameters of the step that just ran,
the steps executed and the cells changed so far. Each action gets its
own time limit.
If a command panics while a step runs, the session's panic guard rolls
the debugged run back as well, so its undo group never stays open.
footprint always ran its dry run with the default 60 second limit, so
macro.run with timeLimit 5 could run for over two minutes (a dry run,
then another after a shift) and fail with "ran longer than 60 seconds".
footprint now takes the run's clock and limit. make_way starts the
run's clock before the dry runs, so the checks and the run share one
limit, and macro.check takes timeLimit too.
Workbook::macros was read straight into typed macros, so one entry this
build couldn't read (a step type from a later build, an unknown
onConflict value, an entry that isn't an object) failed the whole file
with "not a GridCraft JSON workbook". The field is now read as raw
entries into Workbook::macros_read, and macros::load reads each one
with parse_macro, as for xlsx: short-form steps are accepted, the depth
limit is checked before deserializing, and a bad entry is dropped with
the same warning. Only the first 1,000 entries are read, as in xlsx.
Stopping a recording took the recorded commands and where recording started before saving the
macro, so a failed save threw both away. For example, stopping with a name that holds a control
character, or in a workbook at its macro limit, ended the recording, and stopping again with a
good name found nothing to save. A failed save now puts the recording back, so stopping again
saves what was recorded.
The footprint dry run stops at an approved file step and at Solver, but
make_way took a partial footprint with no conflicts as proof that the
run was safe, also after a shift. A macro that exported a CSV and then
set B1 ran under onConflict fail or ask and overwrote B1 without asking.
When the footprint is partial and the rule is not overwrite, the run's
machine now checks every step as it runs: a step that writes over
cells, sheets or objects that held data when the run started stops the
run and rolls it back, with a confirmation under ask and an error
otherwise. make_way now returns the machine for the run along with
whether it shifted.
Step parameters can name where they act through tokens that are worked
out when the step runs, so a macro made on one block of data works on
another: a declared input (Input, or any other input's name), Output
(the output rule's anchor), Row or Column (the current item of the
Repeat step around the step) and Name:Total (a defined name or a
table's data). Methods narrow or move the range: col(n) or
col("Header"), row(n), cols(a..b), rows(2..), cell(r,c) relative to the
top-left cell, offset(r,c), resize(h,w), data (without the header row),
below(n) and right(n). Methods chain.
A token is written as {"$ref": "..."} anywhere, as the whole string of
a reference parameter (cell, range, target, keys ending in Cell or Range
and similar), or as {{...}} inside any string, which is how a formula
refers to its input. Other text parameters are never read as tokens, so
a cell can still hold the word Row and a chart can still be of type
column.
Every token becomes A1 text, sheet-qualified when it is on another
sheet, before the command runs, so no existing command changes. Plain A1
references in a step stay absolute. A reference that runs past the edge
of the sheet is reported apart from other mistakes, so the footprint
check can tell the two apart.
load listed every _gc_macro_ item, then read each one with a scan of
all the workbook's names, and removed each with another full scan.
Damaged items didn't count toward the macro limit, so a file with
20,000 damaged items took 20,000 scans of 20,000 names (seconds, and
far more for a larger file). The names are now taken out of the
workbook and grouped by item in one pass; only the first 1,000 items
are read, and the rest are counted in the warning without being read.
When a file held two macros with the same name, the second was renamed
"name (2)" without room for the suffix. Two macros with the same
255-character name both opened, but the second name grew to 259
characters, was saved that way, and the next open dropped that macro as
over the limits. unique_name now shortens the name to make room for the
suffix, and load checks the macro again after renaming it.
Commands: macro.list, macro.get, macro.save (a macro object or its
fields; replace defaults to true), macro.delete, macro.rename and
macro.record, beside macro.run, macro.check and macro.debug. Saving,
renaming and deleting are undoable. The catalog gains View › Macros ›
Record Macro (parity 275 / 291).
The recorder builds on the recording buffer of top-level commands, so
nested commands are never recorded twice and trimming the journal loses
nothing. When it stops, commands a macro may not run are left out and
listed; a macro run while recording is replaced by its steps when it
has no inputs, and an Automate script run by the script's steps;
sheet.activate and selection.set steps are added where the sheet or
selection changed between commands without one, and runs of them
collapse to the last. With relative references (the default) the
selection when recording started is the example input: references in
and near it become tokens (Input.col(2), Input.rows(2..),
Input.col(2).below, Input.row(4).right, Input.cell(r,c)), exact
references in formulas become {{...}}, and the input's width, header
and column types are inferred from the example. A recording replayed on
a longer block of data writes in the matching places.
A toggle such as Bold is recorded with the state it set ("on": true),
as Excel records Bold = True, so a replay sets it instead of flipping
it again.
Automate scripts are unchanged: automate.* keep their commands,
parameters, storage and results, and View › Macros still lists the
scripts and a preserved VBA project.
A path given as a token (`{"$ref": "Input"}` or `{{Input}}`) became a file name only when the
step ran, after the policy had passed it, so a macro without permissions or approval could write
a file, even from macro.check. Exports also wrote to blank paths the policy ignored. Any `path`
other than null now needs the permission and approval, and the runner checks the policy again on
the resolved parameters before the command runs.
Only parse_macro refused a name holding a line break or other control
character. Macros that came from the macros field of a JSON workbook
were checked with check_limits alone, so a file could bring in a macro
named "a\nb" that macro.save and macro.rename would refuse. The check
now lives in Macro::check_limits, so every path applies it, and such a
macro is dropped with the usual warning when the file is opened.
macro.run runs a macro as one undo step ("Run Macro: <name>"); an error
at any step rolls everything back and names the step and its path (3,
2.1 inside a Repeat, 4.then.1 inside an If). It works in four parts:
- Policy (macro_policy). File, app, window, automate and macro commands
and Undo and Redo never run in a macro. Reading or writing files
(data.getData, data.fromTextCsv, insert.picture, Page Layout
Background, or an export with a path) needs the command in the
macro's permissions and the person's approval. A macro in a workbook
opened from a file asks before it runs. Approval holds for the
session until the macro's content changes; it is asked for with the
new EngineError::Approve and given with approve: true. A step that
would open a dialog or a web page fails instead.
- Inputs. Each declared input is bound (given, its default, or the
selection for the first one), whole columns shrink to the used range,
and the shape and column types are checked with messages that name
the cells: "Input column 2 (Amount) must hold numbers; C4 holds text".
- Footprint. Unless the macro may overwrite, it first runs in dry-run
mode on the real workbook inside an undo group that is rolled back,
with the session's clipboard, journal, windows and the document's
trust put back. CellStore::diff on every sheet, plus the cells
commands wrote (DocState::touched), sheets and objects, gives what it
would write outside its inputs; cells that only recalculated do not
count. Writing over data, deleting a sheet or deleting an object is a
conflict: ask (the new EngineError::Confirm, so programmatic runs fail
unless they pass onConflict or overwrite), fail, overwrite, or shift
the data down or right with Insert Cells and check again. A step that
would fail, for example past the edge of the sheet, fails the run
before anything changes. File steps and Solver stop the dry run early
and are reported.
- Steps run on a machine with an explicit frame stack: Repeat over the
rows or columns of a range with Row or Column bound, If on one cell
with Excel's comparisons, and Stop, which keeps the changes or rolls
them back. A run executes at most 100,000 steps within a time limit
(60 s by default, timeLimit to change; the web build has no clock, so
only the step limit applies there).
macro.check reports the bound inputs, the output anchor, the approval
needed, the footprint and the conflicts without changing anything;
nothing from an unapproved macro runs, not even as a dry run.
A macro is plain data in the model (model/src/macros.rs): a name, a
description, an optional shortcut, declared inputs (shape, header,
column types, non-empty, default reference), steps, an output rule
(anchor and what to do on a conflict) and the commands it may run that
read or write files. A step runs a command (id and params) or is one of
three bounded control steps: Repeat over the rows or columns of a range,
If on one cell's value, and Stop with a message. Every step carries
enabled, breakpoint and note flags. These are GridCraft macros, not VBA;
a VBA project in a file stays preserved and is never run.
Workbook::macros holds them. The JSON format keeps the field. In xlsx,
io::save_bytes writes each macro as one chunked hidden-name item,
_gc_macro_<n>, and io::open_bytes takes the items back out of the names,
so the names never linger in the open document.
Limits are checked whenever a macro is read from a file or a command:
at most 1,000 macros, 10,000 steps each, Repeat and If nested 4 deep,
names and notes of bounded length, and at most 4,194,304 characters of
JSON, so that saving a workbook never fails because of a macro; nesting
is checked before the steps are deserialized. What is over or damaged
is dropped with one warning, and clashing names get a suffix.
Automate scripts keep their own storage (_sc_scripts) and are neither
read nor changed by this.
The item store read, listed and removed every workbook-scope name of the `_gc_<key>_<n>` shape,
visible or not, so saving an item removed a person's own visible name that happened to look like
one. Items are the hidden names the store writes; a legacy `_sc_<key>` name still reads. A visible
`_gc_` name is left alone by every operation, and writing an item that would need that name is
refused before anything changes: a hidden name beside it with the same name is the one an xlsx
file drops, so the item would be lost on save.
A command that changed the workbook cleared the redo history even when an open group owned
its step. When the group was then rolled back inside the same command (the debugger's Stop
with Undo Changes), the rollback put the redo history back and the command's bookkeeping cleared
it again. Now only a command that makes a step of its own clears the redo history; a group
clears it when it ends as a step, and a rollback restores it.
The record of the last group step (document, history length, epoch) outlived the Undo of that
step. A later command that opened and closed its own groups at the same history length, after
rolling one back, passed the epoch check (the record's epoch merely differed from the one the
command started with) and took the name of the nested edit it had made instead of its own.
The step must now come from a group ended during the command (an epoch past the command's
starting one), and a rollback drops a record of a step it truncated away.
prxnvt