* Dev profile: line tables only for workspace crates, no debug info for dependencies
* xtask ci: dev-profile gate, nextest, tests without examples, wasm --keep-going
* One integration-test binary per crate
* xtask ci: run effectcraft-gpu's shared-device tests in one cargo test process
* xtask ci: run every stage and report all failures
* xtask ci: name the stage type (clippy type_complexity)
* xtask ci: run every test pass and report all failures
* cargo fmt
* Use chrono for UTC/calendar conversion instead of hand-rolled copies
Replaces the hand-rolled civil_from_days / days_from_civil copies (log
timestamp, ISO metadata dates, Align Video to Data timestamp parsing, the
Numbers effect's date, the Home and Render Queue date columns, and the
benchmark report date) with chrono as a workspace dependency. Output formats
are unchanged and pinned by the existing tests. AGENTS.md now says time goes
through chrono.
Follow-up to storytold/cadcraft#1785
* Keep 5-digit years unprefixed; derive Numbers weekday from the same date
chrono's %Y writes a '+' before years past 9999, where the old code wrote
{y:04}. timestamp, iso_date, format_utc, utc_stamp and xtask's utc now write
the year with {:04} again and let chrono format the rest, so a far-future
clock keeps the plain zero-padded year.
date_from_days took its weekday from the raw input modulo while the
year/month/day fell back to the epoch for day counts outside chrono's range,
so an unrepresentable count printed a fallback date paired with the input's
weekday. The weekday now comes from the same resolved date, so both agree.
Tests cover the year-10000 timestamp and the out-of-range Numbers date.
* Keep the whole date in format_ago for five-digit years
format_ago cut format_utc to 10 bytes, so a year past 9999 lost its last
digit (10000-01-0). Take the date up to the space instead. Tested.
* Keep Numbers dates exact past chrono's range
date_from_days converted the day count by building a Unix timestamp and
calling DateTime::from_timestamp, which falls back to the epoch (and so
reads 1970-01-01, a Thursday) once the date leaves chrono's NaiveDate
range near year ±262143. Numbers' `value` slider is a plain scalar with
no range guard, so a keyframed count reaches that: Long Date of
100_000_000 showed "Thursday, January 1, 1970" instead of the real
"Monday, September 13, 275790" -- exactly the plausible unrelated-date
fallback the review rejects, and the derived weekday matched the stand-in
date, not the input.
Route it through the 400-year Gregorian cycle like pdfcraft 9d4cb3ca:
chrono converts the day within one cycle (num_days_from_ce of the rebased
rest, always in range) and the whole cycles are added back as years, in
i128 so i64::MIN/MAX can't overflow. chrono stays the only calendar
logic. The weekday still comes from the resolved date, so it always
agrees with it.
Tested: date_from_days_past_chrono_range pins the pre-chrono dates and
weekdays at/over chrono's bound on both sides of the 2000-01-01 epoch
(and that the extremes don't overflow); numbers_formats adds the same
through the public numbers_text entry (Long/Short Date). cargo test
-p effectcraft-effects, fmt --check and clippy -D warnings all clean.
* time: preserve out-of-range years instead of the epoch
`DateTime::from_timestamp(..).unwrap_or_default()` changed the existing output:
inputs the old hand-rolled civil-from-days converted (e.g. `10_000_000_000_000`
s → 318857-05-20 17:46:40) collapsed to the epoch. Restore the old conversion
domain with a cycle-based helper: reduce by whole 400-year Gregorian cycles
(146_097 days), convert the in-range remainder with chrono, and carry the year
back as i128 (saturating to the output type). Only the year leaves chrono's
range; month, day and time of day stay exact. chrono remains the only calendar
logic (NaiveDate::from_num_days_from_ce_opt); no new features.
Sites (UTC):
- crates/engine logging.rs `timestamp` (u64 ms): far-future clock keeps its year.
10e12 s → "318857-05-20T17:46:40.000Z", u64::MAX ms → "584556019-04-03T14:25:51.615Z"
(was "1970-01-01...").
- crates/engine media_browser.rs `iso_date` (u64): 10e12 s → "318857-05-20T17:46:40Z",
u64::MAX → "584554051223-11-09T07:00:15Z".
- crates/ui-egui panels/home.rs `format_utc` (i64): 10e12 → "318857-05-20 17:46",
i64::MIN → "-292277022657-01-27 08:29".
- crates/ui-egui panels/render_queue.rs `utc_stamp` (u64): 10e12 → "318857-05-20
17:46:40", u64::MAX → "584554051223-11-09 07:00:15".
- xtask bench.rs `utc` (u64): 10e12 → "318857-05-20 17:46 UTC", u64::MAX →
"584554051223-11-09 07:00 UTC"; added a test.
* Name the 400-year range extension as the one exception to the time rule
The rule said never to hand-roll calendar math, but the range fix
(shifting by whole 400-year Gregorian cycles so dates past chrono's year
range keep their old output) is cycle arithmetic, so the rule and the code
disagreed. The rule now names that exception: the library still computes
month, day and time, and only whole cycles are carried in the year.
* Say the library computes month and day; time-of-day is plain arithmetic
Narrows the range-extension wording: the date library computes the
calendar fields, and splitting seconds into hours, minutes and seconds
is ordinary arithmetic, which is what the code does.
On an adjustment layer Motion Tile kept the comp-sized buffer whatever the
Output Width / Height, and the adjustment draw dropped any stack result whose
size differed from the canvas. After Effects grows (or crops) the comp
rectangle there as on any layer, so a Transform after it brings the extra
tiles into view, as in the frames attached to #1727 and #1409.
- motion_tile_frame: one output frame for the CPU and GPU effect; on an
adjustment it grows about the comp rectangle on whole pixels, keeps the
buffer at 100 % and past 16 384 pixels a side.
- adjustment_crop: the CPU and GPU adjustment draws put a stack result whose
frame changed back onto the canvas instead of dropping it (Enc::crop on
the GPU).
Tests: the #1727 After Effects frames (910 x 340 % and 90 x 340 % then
Scale 12 %), tiles past the frame and cropping on CPU, GPU vs CPU for
adjustment and full-frame layers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
WGSL cannot read Rust constants, so the Rec. 601 luma (Tint, Tritone, Luma Key /
Extract), Black & White's tint weights and Exposure's 2.2 power stay literals in the
kernels; they now name their Rust source (effects::LUMA_601, BW_TINT_LUMA,
EXPOSURE_LINEAR_GAMMA, newly exported) and the test shader_constants_match_the_cpu
(no GPU needed) fails if a literal drifts. gpu_tint_defaults_match_after_effects_greys
says "skipped: no GPU adapter" when it skips (EFFECTCRAFT_REQUIRE_GPU=1 still makes it
fail). docs/effects-parity.md: Brightness & Contrast is close to, not the same as,
After Effects (up to 6.2/255), and the summary row lists what is measured.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
After Effects' Curves effect interpolates its points with a natural cubic
spline (zero curvature at the ends), clamped to 0..1: AE 2026 renders of an
RGB curve (0,0) (125,199) (255,255) and a Red curve (0,0) (128,44)
(255,255) (cases 962 / 963, ROUND4) give exactly the natural spline's values
on every grey step (0, 30, 59, 115, 164, 202, 227, 242, 250, 255 and 0, 0, 1,
6, 19, 44, 83, 135, 194, 255). EffectCraft used a monotone (Fritsch-Carlson)
spline: 34 / 67 / 125 / 171 ... on the RGB curve, up to 10/255 off (ROUND4
measured up to 6 levels on real projects); now within 1/255, CPU and GPU (the
same Hermite tables carry the spline's knot slopes). Lumetri's curves and
Glow's Arbitrary Map keep the monotone spline (not measured).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Without a Fill Mask, After Effects turns the layer into the fill colour and
applies Opacity to its alpha; nothing of the original shows through. AE 2026
renders Fill (0, 0.5, 1) at Opacity 50 % on a Gradient Ramp over a red solid
as premultiplied (0, 0.251, 0.502) at alpha 0.502 at every pixel; EffectCraft
mixed the fill with the ramp (mean difference 95.5/255), now within 1/255,
CPU and GPU. Invert fills the transparent part the same way. With a Fill
Mask the mix with the original is unchanged (not measured). Lottie's fill
effect (colour, alpha x opacity) now plays the same in EffectCraft.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
After Effects weighs each of the four points by its inverse squared
distance softened by Blend squared, 1 / (d^2 + Blend^2) in pixels: fitted to
AE 2026 renders of the default gradient at Blend 10, 100 and 300 and case
904 E16 at Blend 50 (power 2.00 at every Blend, softening 0 / 2367 / 9817 /
90127 = about Blend^2; mean error 0.27/255, max 0.9). EffectCraft used
1 / (d^2 / (100 Blend))^1.5, in which Blend cancels out: E16 was 34/255 off
on 99 % of the grid, now 0 grid points off, max 1/255, CPU and GPU.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
After Effects 2026 keys Luma Key and Extract (Channel Luminance) on Rec. 601
weights of the working-space values: Key Out Darker / Extract Black Point at
65, 166 and 24 on pure red, green and blue keep red (601: 76, 709: 54) and
blue (29 / 18) and key out green (150 / 182) - Rec. 709, which EffectCraft
used, decides all three the other way. Case 904 E18 (Extract 30 / 220 /
softness 10 on grey and colour steps): 513 of 5184 grid points off (pure blue
kept at 231 in AE, keyed out in EC), now 0, max 0. CPU and GPU.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
After Effects' Luma Key removes everything darker (or brighter) than Threshold
and ignores Tolerance for those two key types; Tolerance only sets the band of
Key Out Similar / Dissimilar. EffectCraft ramped the matte over Tolerance, so
case 719 (a 50 % grey, Key Out Darker, Threshold 140, Tolerance 20) kept about
80 % of the layer where AE keys it out completely.
Measured in AE 2026 on a vertical grey ramp (cases 812-814): Darker keys up to
level 139.9 and keeps 140.1 (EffectCraft now the same row); Similar keys levels
120.3-160.0; with Edge Thin 1 / Edge Feather 2.5 the matte rises over rows
591-596 (EffectCraft within 0.2 of AE's alpha there). CPU and GPU.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
In After Effects 2026 the non-legacy curve of Brightness -40 is the inverse
of Brightness +40 (within 2.6/255 on a full black-to-white ramp) and Contrast
-50 the inverse of Contrast +50. EffectCraft fitted the negative brightness
with its own power (2^(1.32 |b|) on v), 20/255 off AE at -40; the negatives
now use the reciprocal exponents of the positive curves: Brightness -40 max
6.2/255 (was 19.8), Contrast -50 4.1 (was 7.0); positives unchanged (40:
5.5, 80: 7.8, Contrast 50: 2.7, 90: 5.0; B20 C30: 6.6, which confirms
brightness before contrast). The #681 oracle samples still pass. CPU and GPU.
The positive curves' remaining 5-8/255 needs a better curve family (a
two-point spline fits each capture within 1.6/255), left open.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
After Effects 2026 in a 32 bpc project, Levels (Individual Controls) with RGB
(0.1, 0.9, gamma 1.5, 0.05, 0.95), Red Gamma 0.8, Green Input White 0.8 and
Blue Output Black 0.2 on grey steps 0..255 (case 904 E07): every step matches
"each channel's controls, then the RGB controls" with nothing clipped
(values below Input Black end below Output Black, above Input White above
Output White). EffectCraft ran RGB first and clipped "Off for 32 bpc Color"
(it could not see the bit depth): up to 27/255 off on 95 % of the grid; now
0 grid points off, max 1/255, CPU and GPU.
EffectEnv gains float_depth (the renderer sets it for 32 bpc projects), so
"Off for 32 bpc Color" clips in 8 / 16 bpc projects as before. Unclipped
values below 0 take the gamma mirrored through 0. Plain Levels keeps its
order (its channel controls were not measured); its clipping follows the same
rule. EffectCraft's own projects default to 8 bpc and are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
All twelve sliders (Master, Red, Green, Blue) take After Effects'
ranges: Exposure valid -100..100, slider -4..4, 2 decimals (was -20..20,
slider -5..5); Offset -2..2, slider -0.5..0.5, 4 decimals (unchanged);
Gamma Correction valid and slider 0.1..10, 2 decimals (was 0.01..9.99,
slider 0.1..3).
Every value inside the old Exposure and Offset ranges stays valid. Saved
values are not clamped on load, so a gamma below 0.1 from an older
project or a Photoshop import (0.01..9.99) is kept and still renders
(the renderer's 0.01 floor is unchanged); only new edits clamp to 0.1.
Test of the ranges and of an old gamma surviving the load refresh.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With Bypass Linear Light Conversion off, Exposure decoded and re-encoded
with the piecewise sRGB curve. After Effects 2026 renders (sRGB working
space, 32 bpc) of Offset 0.0005 / 0.002 / 0.02 / 0.1 on black measure
8 / 15 / 43 / 90, which a pure 2.2 power predicts (8.06 / 15.13 / 43.08 /
89.54) and the sRGB curve does not (1.65 / 6.59 / 38.68 / 89.04).
The effect now uses its own 2.2 power curve on the CPU and in the GPU
kernel; the shared colour functions and other effects are unchanged. As
before, the conversion applies whatever the working space, also a
linearised one. Negative values go through both curves mirrored (input
was clamped at 0 before), so defaults are an identity for 32-bpc values
and a negative Offset darkens past black without NaN.
New test against the AE values; existing Exposure tests still hold.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
After Effects tints Black & White's gray like a Color blend: the tint colour's
hue and saturation at the gray's luminosity (weights 0.3 / 0.59 / 0.11, channels
outside 0..1 pulled back toward the gray). EffectCraft used the gray as HSL
lightness. Measured in AE 2026, Tint Color [1, 0.5, 0]: a red solid at Reds 10
(case 717) AE (43, 21, 0), EffectCraft was (51, 26, 0), now (43, 21, 0); a
yellow solid at the default sliders (gray 0.6, case 825) AE (255, 129, 2), now
(255, 129, 3); white stays white. The six sliders already matched AE on eight
colours (cases 816, 817). CPU and GPU.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
After Effects' Tritone weighs the working-space values with Rec. 601 (0.299,
0.587, 0.114), as its Tint does; EffectCraft used Rec. 709. Case 718 (red solid,
Highlights [1,1,0.8], Midtones [0.6,0.2,0.2], Shadows [0,0,0.3], Blend 25):
AE (132, 23, 46), EffectCraft was (113, 16, 49), now (132, 23, 46). On a grey
ramp (case 815) the shadows / midtones / highlights mapping already matched and
still does within 1/255. CPU and GPU (fx_color op 4).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
After Effects 2026 (sRGB working space, not linearised) maps red, green,
blue and 50% grey solids at Tint's defaults to 76, 150, 29 and 128/255:
Rec. 601 weights on the working-space values, not Rec. 709. CPU and GPU
kernel changed; tests pin the four greys within 1/255.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
At preview scales from 0.75 to 1 footage keeps native pixels, a proxy sets
its own buffer scale at any render scale, a Preserve Resolution precomp is
drawn at full size, and earlier effects can pad or offset the buffer, so
snapping to the preview grid could pick a different ID than the rendered
matte. Use the scale and offset of the buffer the Cryptomatte effect
receives (layer_input, rendered once and then cached).
The pixel centre goes to an aux point through effectcraft_effects::aux_point,
which index_map_at now calls too, so the two round identically (a division
vs the reciprocal picked the other ID on a 104 px proxy of 1920 px footage).
An unknown effect uid errors "no such effect" and a layer without pixels
"this layer has no pixels", as effect.pickColor does.
Engine part of viewer picking: replace / add / remove the top-coverage ID at a
layer-space point in one undo step, at the time the Selection was read. The
aux channels come from the render's own path (Renderer::layer_aux, shared with
the effect host; footage at its source time, 3D precomps) through a renderer
set up like Session::render (expressions, render prefs, layer cache). An
optional scale snaps the point to the pixel a preview at that resolution
samples. New effects::crypto_select quotes names and falls back to <hex> for
unnamed, wildcard-looking or ambiguous names. effect.cryptomatteAt is the
read-only hover query.
The old check zipped the padded output with the unpadded source, so pixels never lined up and
it always passed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Black & White offset each pixel's luminance by (hue weight - 0.5) times
its HSL saturation. HSL saturation is near 1 for any tinted near-black
pixel, so the code or two of colour noise in compressed footage's
shadows came out as bright and black blocks, and a 32-bpc overbright
such as (1.5, 0.5, 0.5) divided by zero and went black.
The gray is now the pixel's smallest channel plus its chroma (largest -
smallest channel) times the same hue-interpolated slider weight. Neutral
pixels keep their value, a pure hue becomes its slider's percentage
(Reds 40% turns pure red into 40% gray), noise moves the gray by no
more than its own size, and nothing divides. The CPU effect and the GPU
kernel change the same way.
After Effects' Liquify shows Distortion ▸ Offset (x, y), and the renderer
already applied distortionMeshOffset — sampling the mesh at layer
coordinates minus the offset — but the parameter was declared hidden, so
users could neither see nor edit it, and #1194 read as 'the effect does
not work and the Offset option is missing'.
It is now a visible 2D Point control (still defaulting to 0,0, still
scriptable by its old path). Regression test: the spec exposes it as a
Point, a [20,0] offset moves the displaced-region centroid right by the
offset (the render differs, and the left of the shifted mesh is back to
untouched pixels), docs/effects.md refreshed via UPDATE_DOCS.
With the comp's and the layer's motion-blur switches on, the renderer
hands effects the shutter (angle, phase, samples) — CC Particle World
now uses it: eight to sixty-four sprite fields sampled across the shutter
are averaged into the transfer, so fast particles draw the motion trails
After Effects shows instead of one sharp frozen field.
The GPU particle pass defers to the CPU while the shutter is open
(catalog::gpu_supported), keeping the oracle identical on both backends.
Tests: sim::particle_world_motion_blur_trails (blurred differs from
sharp, lights more pixels, keeps alpha energy) and a catalog assertion
for the CPU gate; effects 450 and gpu 212 lib tests pass; fmt and
clippy -D warnings clean.
The pinning regression only exercised All Edges (and Left Edge in the CPU
unit test), so the reported 'does not work with Top/Bottom Edge' had no
coverage to catch or clear it. This holds the pinned first/last row in a
CPU test at Direction 90, and adds CPU/GPU parity cases for Top (4),
Bottom (6), diagonal directions, and single-edge pinning on shape layers.
CPU pinning verified correct on main: the guards in dst_wave_pin/wave_pin
agree; the gap was that neither edge path was tested.
- Cryptomatte (#1183): planes shorter than the image read as empty instead of panicking.
- layer.addMarker (#1180): a comp marker no longer replaces one at the same time.
- Desktop (#1005): ignore macOS's -psn_ argument instead of refusing to launch.
- Doc comments put back on their own items (#1153, #1037).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Gradient Ramp wrote alpha 1.0 to every pixel, so a shape layer's transparent area filled up with
the ramp and the layer's bounds showed instead of the shape. The ramp now uses the pixel's own alpha
on the CPU and in the GPU kernel, as the #939 fix does for the noise effects. A regression test
checks that transparent pixels stay transparent at two Blend With Original values.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
3eb3b99 makes the particles replace their layer as in AE, so their 112 pinned
CPU hashes change intentionally; no other effect changed.
(cherry picked from commit 9900eae773e1cad43a6d1bdcacbadc45a84b063a)
(cherry picked from commit 7aa27c0dd7c24b9f24591bb144a95951dc0ec510)
(cherry picked from commit 73377e8eca5c639715e5f3f623ed53ff329638a0)
(cherry picked from commit f07497dfee)
Echo, Posterize Time and the other Time effects read the layer at other times with none of
its effects. After Effects renders them with the effects before them: SceneYard "Task
Preparation UI" applies Echo after CC Particle Systems II on black solids, and AE shows the
echoed fireworks over a white page where we echoed the black solids and blacked it out
(Posterize Time after Turbulent Displace, the usual stop-motion setup, depends on the same).
The host already bounds the count to the effects before the one rendering.
Mean abs error vs AE: Task Preparation UI 0.1855 -> 0.0071, Lightbulb Idea 0.0126 -> 0.0102;
the 15 other corpus projects with a Time effect after another effect are pixel-identical.
(cherry picked from commit 46870452db2656c72406f63245e8b1609ceb04d4)
(cherry picked from commit 334d102582e5a64db32e2f3e55836d55ac96bdaa)
(cherry picked from commit 734da3e35dc57c01b73823458bdd87611ac1bf99)
(cherry picked from commit 87a733e076)
The particles were composited with the original layer by the Transfer Mode, so the solid an
artist applies them to stayed visible. After Effects 2026 frames show no trace of it:
SceneYard "Burnout matchstick" (a red rectangle around the flame), "Documentary Man Falling"
(a black block over the light), "Task Preparation UI" (black solids under fireworks). The
Transfer Mode now only sets how the particles meet each other.
Mean abs error vs AE: Burnout matchstick 0.0191 -> 0.0130, Documentary Man Falling
0.1177 -> 0.0937 (Task Preparation also needs the next commit).
(cherry picked from commit 3eb3b9958f9cd929dcf060865e604d42cc0f9337)
(cherry picked from commit 729638710e63f4da10711fc5e6a1f7ddc42c37aa)
(cherry picked from commit 083332116c936f1b4863f0bb390d0647f2b567a1)
(cherry picked from commit 338421de36)
aiongg