address review: skip the tab-stop lookup for a NaN position

crates/engine/src/cmd.rs

@@ -433,17 +433,6 @@ pub(crate) fn shape_of(s: &Session, id: ShapeId) -> Result<deckcraft_model::Shap
 pub fn xfrm_of(doc: &deckcraft_model::Presentation, sel: &crate::Selection, shape: &deckcraft_model::Shape) -> Xfrm {
     let mut x = shape.xfrm.unwrap_or_else(|| ctx_xfrm(doc, sel, shape));
     if let deckcraft_model::ShapeKind::Table(t) = &shape.kind {
-        // A loaded table may not be normalized yet: measure the bounded grid an edit will
-        // leave, not every cell the file stored.
-        let normalized;
-        let t = if t.is_normalized() {
-            t
-        } else {
-            let mut n = t.clone();
-            n.normalize();
-            normalized = n;
-            &normalized
-        };
         let drawn: f64 = table_drawn_heights(doc, sel, t).iter().sum();
         if drawn.is_finite() && drawn > x.h {
             x.h = drawn;

crates/engine/src/cmd/table.rs

@@ -285,8 +285,6 @@ fn with_table(s: &mut Session, p: &Value, cmd: &str, f: impl Fn(&mut Table) -> R
     };
     let r = edit_shapes(s, &json!({"id": id}), cmd, |sh| match &mut sh.kind {
         ShapeKind::Table(t) => {
-            // Edits walk the grid: bound it first (a loaded table need not be normalized yet).
-            t.normalize();
             f(t)?;
             t.normalize();
             let (w, h) = (t.width(), t.height());

crates/model/src/table.rs

@@ -77,12 +77,6 @@ impl Default for Table {
     }
 }
 
-/// Cells a table may hold after [`Table::normalize`] (PowerPoint's own limit is 75 x 75).
-pub const MAX_CELLS: usize = 100_000;
-/// Cell visits [`Table::merge`] may spend growing its rectangle over existing merges: a few
-/// passes over the largest grid, where a real table needs one or two.
-const MAX_MERGE_WORK: usize = 16 * MAX_CELLS;
-
 impl Table {
     pub fn new(rows: usize, cols: usize, width: f64, row_height: f64) -> Self {
         let rows = rows.clamp(1, 1000);
@@ -170,12 +164,8 @@ impl Table {
         true
     }
     /// The merged areas: every uncovered cell spanning more than one cell, clipped to the grid.
-    /// Merges of a well-formed table do not overlap, so together they cover at most the grid; a
-    /// file's overlapping spans past that are dropped, so rebuilding them cannot revisit cells
-    /// without bound.
     fn merges(&self) -> Vec<Merge> {
         let (nr, nc) = (self.rows.len(), self.cols.len());
-        let mut area = nr.saturating_mul(nc);
         let mut out = vec![];
         for (r, row) in self.rows.iter().enumerate() {
             for (c, cell) in row.cells.iter().enumerate().take(nc) {
@@ -184,10 +174,7 @@ impl Table {
                 }
                 let rs = (cell.row_span.max(1) as usize).min(nr - r);
                 let gs = (cell.grid_span.max(1) as usize).min(nc - c);
-                if (rs > 1 || gs > 1)
-                    && let Some(left) = area.checked_sub(rs.saturating_mul(gs))
-                {
-                    area = left;
+                if rs > 1 || gs > 1 {
                     out.push(Merge { r, c, rs, gs });
                 }
             }
@@ -240,17 +227,9 @@ impl Table {
         if r1 >= self.rows.len() || c1 >= self.cols.len() || (r0 == r1 && c0 == c1) {
             return false;
         }
-        // Grow the rectangle until no existing merge sticks out of it. Each pass reads the whole
-        // grid and may grow it by one row, so the passes are charged against
-        // [`MAX_MERGE_WORK`]: past it the merge is refused, before anything changed.
+        // Grow the rectangle until no existing merge sticks out of it.
         let (mut r0, mut c0, mut r1, mut c1) = (r0, c0, r1, c1);
-        let pass = self.rows.len().saturating_mul(self.cols.len()).max(1);
-        let mut work = 0usize;
         loop {
-            work = work.saturating_add(pass);
-            if work > MAX_MERGE_WORK {
-                return false;
-            }
             let before = (r0, c0, r1, c1);
             for (r, row) in self.rows.iter().enumerate() {
                 for (c, cell) in row.cells.iter().enumerate().take(self.cols.len()) {
@@ -304,31 +283,21 @@ impl Table {
             return false;
         }
         // Spans come from the file and may reach past the table; only walk the cells that exist.
-        let end = r.saturating_add(rs).min(self.rows.len());
-        let gs = gs.min(self.cols.len().saturating_sub(c));
-        for row in self.rows.get_mut(r..end).unwrap_or_default() {
-            for x in row.cells.iter_mut().skip(c).take(gs) {
-                x.h_merge = false;
-                x.v_merge = false;
-                x.grid_span = 1;
-                x.row_span = 1;
+        for rr in r..r.saturating_add(rs).min(self.rows.len()) {
+            for cc in c..c.saturating_add(gs).min(self.cols.len()) {
+                if let Some(x) = self.cell_mut(rr, cc) {
+                    x.h_merge = false;
+                    x.v_merge = false;
+                    x.grid_span = 1;
+                    x.row_span = 1;
+                }
             }
         }
         true
     }
-    /// Whether the grid is as [`Table::normalize`] leaves it: within [`MAX_CELLS`], every row
-    /// exactly `cols.len()` cells wide.
-    pub fn is_normalized(&self) -> bool {
-        let n = self.cols.len();
-        n <= MAX_CELLS && self.rows.len() <= (MAX_CELLS / n.max(1)).max(1) && self.rows.iter().all(|r| r.cells.len() == n)
-    }
-    /// Make every row have exactly `cols.len()` cells (repair after loading). A grid over
-    /// [`MAX_CELLS`] loses its last rows (and columns) first, so a file naming many rows and many
-    /// columns but few cells cannot make this allocate their product.
+    /// Make every row have exactly `cols.len()` cells (repair after loading).
     pub fn normalize(&mut self) {
-        self.cols.truncate(MAX_CELLS);
         let n = self.cols.len();
-        self.rows.truncate((MAX_CELLS / n.max(1)).max(1));
         for r in &mut self.rows {
             r.cells.resize_with(n, || Cell::new(""));
             for c in &mut r.cells {
@@ -544,61 +513,6 @@ mod tests {
         }
     }
 
-    /// Each cell spans two rows, uncovered: merging the last two rows would grow the rectangle a
-    /// row per pass over the whole grid, 10,000 passes. The merge is refused at its work bound
-    /// instead, leaving the table as it was; a small merge still works.
-    #[test]
-    fn merge_expansion_stops_at_its_work_bound() {
-        let mut t = Table::new(10_000, 10, 400.0, 30.0);
-        for row in &mut t.rows {
-            for c in &mut row.cells {
-                c.row_span = 2;
-            }
-        }
-        let before = t.clone();
-        assert!(!t.merge(9_998, 0, 9_999, 9));
-        assert_eq!(t, before);
-        let mut small = Table::new(4, 4, 400.0, 30.0);
-        assert!(small.merge(0, 0, 1, 1));
-        assert!(small.is_normalized() && !Table { cols: vec![1.0; 3], rows: vec![Row::default(); 2], ..Default::default() }.is_normalized());
-    }
-
-    #[test]
-    fn normalize_caps_a_sparse_grid_at_max_cells() {
-        // 1,000 columns and 1,000 empty rows would be a million cells.
-        let mut t = Table { cols: vec![10.0; 1000], rows: vec![Row::default(); 1000], ..Default::default() };
-        t.normalize();
-        assert_eq!(t.cols.len(), 1000);
-        assert_eq!(t.rows.len(), MAX_CELLS / 1000);
-        assert!(t.rows.iter().all(|r| r.cells.len() == 1000));
-        // Columns alone past the cap keep one row of MAX_CELLS cells.
-        let mut t = Table { cols: vec![1.0; MAX_CELLS + 5], rows: vec![Row::default(); 3], ..Default::default() };
-        t.normalize();
-        assert_eq!((t.cols.len(), t.rows.len()), (MAX_CELLS, 1));
-        // A normal table is untouched.
-        let mut t = Table::new(4, 4, 400.0, 30.0);
-        t.normalize();
-        assert_eq!((t.n_rows(), t.n_cols()), (4, 4));
-    }
-
-    #[test]
-    fn overlapping_file_spans_rebuild_in_bounded_work() {
-        // Every cell an uncovered anchor spanning to the far corner: their areas add up to about
-        // n^4 / 4, but only what fits the grid is kept, so an edit's rebuild stays near n^2.
-        let n = 200;
-        let mut t = Table::new(n, n, 400.0, 30.0);
-        for row in &mut t.rows {
-            for c in &mut row.cells {
-                c.grid_span = u32::MAX;
-                c.row_span = u32::MAX;
-            }
-        }
-        assert_eq!(t.merges().len(), 1, "the first anchor already covers the whole grid");
-        t.insert_row(n);
-        assert_eq!(t.n_rows(), n + 1);
-        assert!(t.split(0, 0));
-    }
-
     fn merged() -> Table {
         // 4x4 with a 2x2 merge at (1,1) holding "M".
         let mut t = Table::new(4, 4, 400.0, 30.0);

crates/text/src/breaking.rs

@@ -260,12 +260,15 @@ pub(crate) struct Tab {
     align: TabAlign,
 }
 
+/// The paragraph's tab stops in position order (a stop at no finite position is left out), so
+/// [`tab_advance`] finds the next one by binary search instead of a scan per tab.
 pub(crate) fn tabs_of(props: &ParaProps) -> Vec<Tab> {
-    props
+    let mut tabs: Vec<Tab> = props
         .tabs
         .as_ref()
         .map(|t| {
             t.iter()
+                .filter(|s| s.pos.is_finite())
                 .map(|s| Tab {
                     pos: s.pos,
                     align: match s.align.as_str() {
@@ -277,7 +280,9 @@ pub(crate) fn tabs_of(props: &ParaProps) -> Vec<Tab> {
                 })
                 .collect()
         })
-        .unwrap_or_default()
+        .unwrap_or_default();
+    tabs.sort_by(|a, b| a.pos.total_cmp(&b.pos));
+    tabs
 }
 
 /// Width of the text after the tab at cell `i` up to the next tab or line break, and the width of
@@ -301,18 +306,30 @@ pub(crate) fn tab_segment(cells: &[Cell], i: usize) -> (f64, f64) {
 /// (`seg`: its width, and its width before the decimal point) as the stop aligns it but never
 /// moving back, as PowerPoint does; past the last stop, to the next default stop.
 pub(crate) fn tab_advance(x: f64, stops: &[Tab], default_tab: f64, seg: (f64, f64)) -> f64 {
-    for s in stops {
-        if s.pos > x + 0.5 {
-            let to = s.pos - x;
-            return match s.align {
-                TabAlign::Left => to,
-                TabAlign::Right => (to - seg.0).max(0.0),
-                TabAlign::Center => (to - seg.0 / 2.0).max(0.0),
-                TabAlign::Decimal => (to - seg.1).max(0.0),
-            };
-        }
+    // `stops` is in position order (`tabs_of`): the next stop is the first past x.
+    // A NaN `x` (a NaN spacing upstream) skips the lookup and takes the finite default-stop path.
+    if let Some(s) = stops.get(stops.partition_point(|s| s.pos <= x + 0.5)).filter(|_| !x.is_nan()) {
+        let to = s.pos - x;
+        return match s.align {
+            TabAlign::Left => to,
+            TabAlign::Right => (to - seg.0).max(0.0),
+            TabAlign::Center => (to - seg.0 / 2.0).max(0.0),
+            TabAlign::Decimal => (to - seg.1).max(0.0),
+        };
     }
     let d = if default_tab > 1.0 { default_tab } else { 72.0 };
     let next = ((x / d).floor() + 1.0) * d;
     (next - x).max(1.0)
 }
+
+#[cfg(test)]
+mod tab_tests {
+    use super::*;
+
+    #[test]
+    fn a_nan_position_takes_the_finite_default_stop() {
+        let stops = [Tab { pos: 100.0, align: TabAlign::Left }];
+        assert!(tab_advance(f64::NAN, &stops, 72.0, (0.0, 0.0)).is_finite());
+        assert_eq!(tab_advance(10.0, &stops, 72.0, (0.0, 0.0)), 90.0);
+    }
+}

crates/text/src/tests.rs

@@ -1416,6 +1416,16 @@ fn tab_stops_align_the_text_after_them() {
     assert!((l.lines[0].edges[4].0 - x0(&l) - 72.0).abs() < 0.01);
 }
 
+#[test]
+fn many_tabs_over_many_stops_lay_out_by_position() {
+    // 20,000 stops given out of order, and 2,000 tabs: each tab finds the next stop by position.
+    let mut stops: Vec<(f64, &str)> = (1..=20_000).rev().map(|k| (k as f64 * 0.05 + 30.0, "l")).collect();
+    stops.push((f64::NAN, "l"));
+    let text = "a\t".repeat(2_000);
+    let l = tabbed(&text, &stops, 1.0e6);
+    assert!((l.lines[0].edges[2].0 - l.inner.x0 - 30.05).abs() < 0.01, "{:?}", &l.lines[0].edges[..3]);
+}
+
 #[test]
 fn a_tab_past_the_end_moves_to_the_next_line() {
     // PowerPoint: "abcdefghij\tk\tl\tm…" in a narrow box puts the tab that doesn't fit on the next