* #5843: resolve LibreOffice semicolon-separated font fallback lists to first installed family
* #5843: address review comments on font fallback list resolution
* #5843: verify fallback list text on cache hit and accept Times New Roman in tests
* #5843: bound the fallback lists read from a DOCX and reuse their classification
A document could name thousands of fallback families in `w:ascii`/`w:hAnsi`.
Nothing bounded that value, and the name-based rules (roman classification,
Thai family, named substitutes) then scanned every candidate for each shaped
piece, so opening the document took seconds.
`w:ascii` and `w:hAnsi` now keep the leading families within MAX_FONT_NAME
bytes, cut at a `;` so no name is split, as `w:cs`/`w:eastAsia` already bound
their names. The family a real list would pick is kept: a LibreOffice list
names a few families, well under the bound.
The Thai-family and named-substitute answers are worked out once per list and
kept in the fallback-list cache, keyed by the list text, so shaping no longer
rescans candidates for every piece. Resolution still reads every candidate.
A 500-paragraph document whose font names 20,000 candidates laid out in 10.8 s;
bounded on read it takes 17 ms.
Tests:
- a hostile fallback list keeps its leading families, cut on a `;`
- a real LibreOffice list is read whole
- a later Thai or named fallback still classifies, and lists are cached
* Proofing: Check spelling as you type is one setting for every open document (#5740)
Each open document's view kept its own copy of the setting. Turned off with one document active, it stayed on in the others, and the settings saved for the next run took the value of whichever document was active then, so it came back on. A document made active now takes the saved preference, as Read Mode's page colour already does.
* Contributors: credit ashokram-si as Ashok Ram
* Proofing: every view made active follows the app-wide settings, a window's view put back too (#5740)
put_view restored a window's view with the Check spelling as you type value it had when it was taken, after switch_to had applied the shared preference, so the settings saved for the next run could take the old value again. One ViewState::follow_prefs now applies the app-wide settings a view keeps a copy of (Read Mode's page colour and Check spelling as you type) wherever a view is made active: switch_to, a new document's view, set_document and put_view.
* test(ui): Check spelling off in a second window stays off in every window (#5740)
The whole sequence through the app: View › New Window, spelling turned off in the second window, the first window's own view put back (put_view), a new document's window, back to the second window, then the saved settings read by a new app. Fails if put_view doesn't follow the setting.
---------
Co-authored-by: ashokram-si <347905169+ashokram-si@users.noreply.github.com>
* M2.1: find smart-quoted words with a keyboard apostrophe (#5388)
* M2.1: align Find parity status and regression docs (#5388)
---------
Co-authored-by: Martin Ball <martin.ball@ucscaregroup.co.uk>
* Ctrl+K on a selection shows the changed Text to display
With text selected, the Link dialog's Text to display was ignored:
insert.link only linked the selection. A changed text now retypes the
selection (keeping its formatting, tracked with Track Changes on) and
links it. The same text, text with a line break, or a selection over
several paragraphs or holding a picture or field keeps its text.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Links: keep selections a changed Text to display can't replace
Review of the Ctrl+K retype: a selection holding a manual line break,
page or column break, or sitting in a field's result is only linked, so
neither both lines nor the field's result are lost. `select.text` clears
the caret formatting as `select.word` does, so a second retyped link
keeps its selection's bold instead of the first link's default props.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Selections: select.all, select.range and select.word drop pending formatting
A link leaves plain formatting pending for what is typed after it. These
commands kept it, so retyping the next selection took that instead of the
selection's own formatting, as select.text and select.word's caret moves
already avoid.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Gap 4: flag document fonts that aren't installed
The font box (ribbon, mini toolbar, both Font dialog boxes) shows a
warning mark when the current font isn't installed; its hover note
names the font drawn instead. The status bar says "N fonts not
installed" and lists each with the faces drawn instead, plus Add Font….
Agents get `font.missing` and `format.state.fontShownAs`.
Layout records, where it picks a face per text segment, the fonts the
shown text asks for that aren't installed and the faces drawn instead
(ParaLayout::substituted, DocLayout::substituted_fonts), so hidden
text, unused styles and orphaned stories never count; list labels,
field results and East Asian and complex-script text do, and so does a
missing roman font drawn in Cambria. Metric-compatible substitutes and
symbol fonts drawn as Unicode aren't flagged. Bounded for hostile
files: 64 pairs a paragraph, 1024 a document, names kept to 256
characters, 20 rows in the popup.
Ported from alehel/wordcraft#1 onto current main; English strings only
(translations belong in storytold/craft-i18n).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Gap 4: missing-font review fixes
- Judge a padded font name by the face layout drew for it, and skip blank names.
- Name the face CJK text is drawn in for a missing East Asian font, not Cambria.
- Keep the missing-fonts list per window, so several windows don't rebuild it every frame.
- Expose the font box's warning to screen readers as its description.
- Count missing fonts with craft-i18n plurals (`i18n::tn`).
- One table of metric twins (`fonts::word::METRIC_TWINS`): a missing font is drawn in an
installed twin first, and the warning reads the same table.
- Find the status-bar item by part of its label in the click test.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Gap 4: warn for a font picked at the caret; drop fonts of hidden list items
- At a collapsed caret the font box warns for a missing font typing will use, also at the end
of text in another font (it waited for the first letter).
- A list item that shows nothing (#3982) reports no missing font: its number was shaped, and
its font recorded, before layout dropped it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Gap 4: say where Add Font… is, and that it needs the font file
The font box's note said "Add Font… installs it": Add Font… opens a file picker at the end of
the list, so it only helps with a font file at hand.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Gap 4: docs say the popup lists 20, and when the font box warns ahead
CodeRabbit review: the status-bar popup lists the first 20 missing fonts, then a count; the font
box also warns at a collapsed caret for a font no shown text uses yet; `fontShownAs` is the
font's substitute, fallback faces aside.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Gap 4: the Font dialog warns for a missing font over a selection
CodeRabbit review: the dialog's boxes show the fonts OK applies, which no shown text may use
yet (an Asian text font over Latin text, a font typed into the dialog), so they name the
substitute whatever is selected. The ribbon's box over a selection still reads the list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Gap 4: the Asian font box names the face CJK text gets
CodeRabbit review: the status bar's list is by font name, so for a font Latin text also uses
it named the Latin text's substitute. The Asian text box now always looks up the face layout
draws Chinese, Japanese and Korean text in.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Gap 4: gaps.md status on the current line, missing-font scope and twin wording
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Gap 4: gaps.md says which missing fonts are flagged and what font.missing lists
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Gap 4: font.missing lists what the current view lays out
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
craft-proof moves to storytold/craft-libs#483's head (e6e948f, on #482's
9e5862a): each English checks against its own SCOWL rel-2026.02.25 dictionary
through the affix engine (ordinals via COMPOUNDRULE), with en-variants.txt as
the dialect policy. Lookup order: dictionaries folder, [English pack], SCOWL,
system Hunspell, the built-in Moby list; Moby stays for hyphenation.
craft-i18n.rev and the Flatpak source move to storytold/craft-i18n#109's merge
commit (efb1127), which adds the SCOWL files.
Typed-text tests pin British spellings in en-GB (#40), modern words (#520),
Canadian/Australian/NZ/Indian English (#1281, #1045) and ordinals; they skip
without the Language data, as the other data tests do. Docs: typing-parity,
localization-parity, ROADMAP progress log.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCX8LsYYE8fsj4byBm2
Polish/Portuguese/Czech review commands, the custom dictionary file and the two typing squiggle
tests pass without CRAFT_I18N_DIR at 48ed6f8. English dialects, regions' English and Hyphenation
Options still need the variant table and patterns, so they keep the skip.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCX8LsYYE8fsj4byBm2
- wordcraft-proof is now `package = "craft-proof"` from craft-libs (local
path for now; TODO in Cargo.toml for the git+rev pin after the craft-libs
PR merges). `wordcraft_proof::` paths are unchanged.
- crates/proof and assets/{spelling,hyphenation} deleted with their
ATTRIBUTION.md rows; one row now points at craft-i18n's Language data;
NOTICE paths updated.
- craft-i18n.rev (and the flatpak source) moved to the craft-i18n commit that
adds language-data/ (CI sets CRAFT_I18N_REQUIRED=1, so the pin must have it).
- xtask layers: proof removed. Engine tests carry their own copy of the
synthetic Czech fixture (they reached into crates/proof/src).
- Docs: architecture.md, CLAUDE.md/AGENTS.md layer table, README build note
(CRAFT_I18N_DIR), localization-tr path, ROADMAP progress log.
Before/after wordcraft-cli on a 17-language proofing document: issues,
suggestions, manual hyphenation, PDF text and PDF bytes identical.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCX8LsYYE8fsj4byBm2
Tests and notes for rules that #4129, #4113, #4109 and #4101 added and
left uncovered:
- A border line at the top of a story with formatting left out of the
Track Changes markup is not a formatting change, and Reject All keeps
it.
- The author's own earlier formatting change on that paragraph stays the
one change.
- Reject All keeps the table of a "+---+" line.
- A border line that a content control's lock stops Backspace from
deleting stays as it is, and Enter is refused, untracked too.
- With tab indents on, Tab in a table cell moves to the next cell; with
them off, Backspace before an indented paragraph joins it.
- AutoCorrect and the spelling check's web and e-mail addresses after a
narrow no-break space and a figure space.
docs/typing-parity.md describes each, and lists a no-break space typed
after a word, which does not finish the word for AutoCorrect, as a
known gap.
Conversions: line breaks to paragraphs, blank paragraphs between, separate
paragraphs, spaces to indentation, indents to leading spaces, join lines.
Cleanup: delete blank paragraphs, remove leading spaces, collapse extra
spaces. Each command works over the selection, or the whole document with
scope "all"; one undo step per command; deletions are recorded under Track
Changes. Home ribbon drop-down with per-command entries, including whole-
document variants. 16 engine tests, 1 ribbon kittest.
Closes#5043
* #3631: index laid-out objects during connector rerouting
* docs: keep the gaps.md note in the status line and revision table
* docs: drop a stray blank line
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* M2 #4903: step each selected run from its own font size
* docs: keep the gaps.md note in the status line and revision table
* docs: drop a stray blank line
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* #4086: highlighting at a caret leaves the word alone
* #4086: the highlight toggle reads pending caret formatting; word formatting updates it
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Backspace after a floating shape's anchor joins paragraphs and keeps the shape (#4592)
* wc-upkeep-6: protect Backspace joins and markers
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* 4757: keep Arabic base letters when removing marks
* docs: keep the gaps.md note in the status line and revision table
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>