* Arabic interface: mirrored right-to-left window and Arabic UI fonts
Adds the Arabic (`ar`) interface language's code: its catalogs are craft-i18n's
`locales/ar`, so this changes no catalog.
- `ar` is registered in `i18n::LANGUAGES` and `Lang::rtl()` says it is written
right to left; its translations are used as written (egui's text layout
orders each line's bidi text itself). A ribbon location reads from the right
with a leftwards mark.
- `rtl.rs`: the window is mirrored. Containers open in `rtl::root`; columns,
grids, checkboxes, radio buttons, menus, rows, panels, the dialog tab strip
and the ribbon's scrolling row follow the language's direction. Title bar,
status bar, ribbon tabs and groups, File pages (including Print, with the
settings on the right and a solid scrollbar gutter), dialogs, menus and the
task panes (their docking edge swaps) are laid out from the right. egui's
`Grid` panics in a right-aligned layout, so grids go through `rtl::grid`.
- Arabic UI font fallback: the craft-fonts Arabic face, else an installed
Arabic font, loaded when the interface is Arabic.
- The "Auto (200%)" size label keeps its percent sign inside the isolated
number.
- Tests: Arabic locale, saved preference and lookup order on fixture catalogs;
an interface audit (skipped without the craft-i18n Arabic catalog) that lays
the app out right to left at several widths, checks tab, group, pane, Print
and Go To positions and that nothing panics.
The Arabic work builds on Abdelhaq El Amraoui's mirrored-interface PR (#737).
Co-Authored-By: Abdelhaq El Amraoui <abdelhaqelamraoui@gmail.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: pin craft-i18n at a commit with the Arabic catalog; review fixes
- craft-i18n.rev and the Flatpak manifest pin 19358491 (craft-i18n main), the
first commit line that has locales/ar/wordcraft.tsv. The old pin had no
Arabic catalog, so `ar` was registered but not embedded and two i18n tests
(the_language_setting_is_a_ui_command_and_persists,
the_languages_offered_are_the_embedded_ones_of_the_list) failed in CI.
- The Arabic font fallback is requested for any right-to-left interface
(`Lang::rtl()`), not only after the language picker sets the flag, so an
automatic or saved Arabic gets the installed Arabic face.
- The file browser, the update window and Reading Mode's toolbar run their
bodies in `rtl::root`, so their far-side buttons and rows are mirrored.
- A group in a right-to-left ribbon row is measured from the right edge: the
cursor's left edge is negative infinity there, so its width was NaN and the
ribbon planner dropped every group, never compacting a narrow Arabic window.
A narrow window now folds groups into drop-downs.
- The mirrored checkbox and radio marks are labelled by their text, so screen
readers name them.
- Tests: group width in a right-to-left row; the Arabic interface audit checks
Reading Mode's toolbar.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: ask for the installed Arabic font separately from the CJK one
A previous commit made every right-to-left interface request the installed CJK
fallback font (`system_cjk`) so that the installed Arabic font would load. That
also made every Arabic launch read a large system CJK font file when no
craft-fonts input is embedded (the Flatpak build has none).
`install_ui_fonts` now passes a separate `system_arabic` flag (`Lang::rtl()`):
the installed Arabic font is read for it, and `system_cjk` is again set only
by a CJK interface or by CJK text on screen. `WordApp::fonts_system_arabic`
remembers what was installed, so a language change reinstalls the fonts.
Tests: the_installed_arabic_font_is_asked_for_by_arabic_alone (the Arabic flag
adds the installed font only when none is embedded, and the CJK request alone
adds no Arabic font). Checked a headless screenshot of the Arabic interface
without craft-fonts: the installed Arabic font draws the labels.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Fix the AutoSave switch knob: on is at the right, mirrored in Arabic
The title bar's AutoSave knob was placed with `lead_x(rtl == on, ..)`, which
reverses main's mapping in both directions: left to right it drew the knob at
the left when the switch was on, and right to left at the right. main draws it
at the right when on and at the left when off, so the mirrored interface must
draw it at the left when on: `rtl != on`.
The position is now `autosave_knob_x(rtl, on, track)`, pinned by a test for all
four cases. A headless screenshot of the off switch shows the knob at the left
in English and at the right in Arabic.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: file names and paths in right-to-left lines; kerning row order
Tester feedback on the Arabic interface:
- File > Open's Recent list, the built-in file browser and the title bar drew
file names and paths raw, from the left edge. In an Arabic line the marks of
a name ("(نهائي) 2.docx") and the folders of a path with Arabic parts were
scrambled. Rows now start at the side reading starts from (`rtl::lead_x`),
names go through `i18n::isolate` (a first-strong isolate, with a left-to-right
mark before the extension so `2.docx` stays `2.docx`) and paths through
`i18n::isolate_path` (a left-to-right isolate with a mark after every
separator, so neighbouring Arabic folders do not swap). Other languages get
the text untouched; saved and spoken text never carries the marks.
- Font dialog, Kerning row: the dialog's grid is drawn left to right inside a
right-to-left window, so "Points and above" came after its number; in an
Arabic interface it now comes first, so the line reads "14 نقطة فأكثر" from the
right. (The grid's columns themselves still keep their left-to-right order.)
Tests: names_and_paths_are_isolated_in_a_right_to_left_interface.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: mirror through craft_ui::direction and Style::right_to_left
The suite's craft-ui now has the direction helpers (`craft_ui::direction`) and
its egui fork a `Style::right_to_left` that mirrors egui's own chrome. Use them
instead of our parallel wrappers:
- `rtl::sync(ctx)` applies the interface direction every frame the language's
changes (`direction::apply`): it sets the shared direction state and
`Style::right_to_left` on every theme, which draws check boxes and radio
buttons with the mark at the reading start, mirrors submenus, scroll bars,
title bars and the combo boxes' arrows (the Print page's choice lists, the
font list) and opens combo menus from the right.
- `rtl::checkbox`, `radio_value`, `radio` and `indeterminate_checkbox` are
gone: about 200 call sites use plain `ui.checkbox`, `ui.radio_value`, ... and
egui does the mirroring (and names the control by its text, as a plain widget).
- `lead_x`, `lead_center`, `lead_top`, `start_panel` and `end_panel` delegate to
`craft_ui::direction`. `root`, `flows`, `island`, `grid`, `menu`, `vertical`,
`far_side` and the other layout helpers stay: the shared crate has no
equivalent that fits them.
Visual changes: the combo boxes' drop-down arrows and lists are mirrored in
Arabic; nothing changes in left-to-right languages (checked headless
screenshots of the English main window, Font dialog and Print page).
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Recent files and the file browser: full path on hover, long names keep their start
Review feedback:
- Each row of File > Open's Recent list shows the document's full path as its
tooltip (the path line under the name can be longer than the row).
- A long name in the built-in file browser is laid out in one row, with an
ellipsis at its end, from the side reading starts from, instead of being
clipped at the row's edge: in a right-to-left interface the old text anchored
at the right edge cut the end of an Arabic name and the start of a Latin one.
The whole name is the row's tooltip when it was shortened.
Checked headless screenshots of the file browser with a long English and a long
Arabic name.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Font combos in a right-to-left row: the arrow joins its field on the left
The ribbon's font name and size boxes are drawn from a field and a separate
arrow box that share one outline: the field is square and the arrow's box is
rounded on the side where the arrow goes, painted a border width under the
field. That assumed the arrow is right of the field. In a right-to-left row
(the Arabic ribbon) the arrow comes after the field on its left, so the field
was square on the wrong side and the arrow box rounded on the side facing the
field: two boxes with a gap-like seam, the arrow looking outside the frame.
`arrow_box_shape(rtl, ..)` mirrors the radii and the underlap, and the field's
square corners are chosen by the row's direction (the nw/sw pair in right to
left). Left-to-right rows are drawn exactly as before (English before/after
crops are identical).
Test: the_arrow_box_is_rounded_away_from_its_field.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Pin craft-i18n 4612850 (merged Arabic WordCraft rows, craft-i18n#76)
The pin and the Flatpak manifest commit move from 1935849 to 4612850, which is on
craft-i18n main and adds the 70 Arabic rows this branch relies on.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Pin craft-i18n cac2cf0 (Arabic number agreement and status-bar rows)
Moves the pin and the Flatpak manifest commit from 4612850 to the current craft-i18n
main, which includes craft-i18n#95 (48bed03) and #81 (ef58ff3).
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic: isolate paths shown beside labels; mirror the Print page zoom
File > Info shows Location as its own left-to-right path label (cut short with the full path on hover, not wrapped), and the open-failure, Exported and dictionary-file messages isolate their paths. The Print preview zoom puts minus at the slider's left end and plus at its right in Arabic, as the status bar does.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic: mirror the label/field rows of the Font, Info, Paragraph, Page Setup, Insert Table and Options forms
rtl::Table lays a form out as an egui Grid in a left-to-right interface (same id, columns and spacing, so the output is unchanged) and, where the interface is mirrored, with each row's cells running from the right, every column as wide as its widest cell. File > Info puts Properties at the right and Statistics after it, and the Font dialog's kerning row reads 14 points and above.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Docs: record the mirrored Arabic interface in the roadmap, gaps and localization parity
Progress log, the Arabic language row, gap 11 and the status lines and revision histories of the three docs.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: Insert Hyperlink, Word Count, Phonetic Guide, New Style, Modify Style, Encrypt, merge rule and Match Fields dialogs read right to left
Their label-and-field rows use rtl::Table, so in a mirrored interface the label is at the right with its field to its left. rtl::Table gains striped() for Match Fields. English renders are pixel-identical (only a caret-blink strip differs in an untouched dialog).
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: Line Numbers, Hyphenation, Drop Cap, Caption, Cross-reference, Index, Mark Index Entry and Source dialogs read right to left
Their label-and-field rows use rtl::Table (label at the right, field to its left). English renders are pixel-identical.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: Picture Size, Split Cells, Convert Text to Table, Footnote and Endnote, Table Properties, Cell Options and Custom Properties dialogs read right to left
Their label-and-field rows use rtl::Table. Picture Size's Height and Width pairs read Height first at the right. English renders are pixel-identical.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: Define New Multilevel List, Track Changes Options, content control properties, custom colours and table style dialogs read right to left
Label, field and swatch rows use rtl::Table. English renders are pixel-identical.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: Columns widths, Special Characters, Compare, AutoCorrect and About Models tables read right to left
Table columns now start at the right edge (rtl::Table gains top(), min_row_height() and an unset column count). About > Models stays a left-to-right scroll box with its columns listed from the right. English renders are pixel-identical (only the caret blink differs).
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: table-of-contents styles, recipient filter and sort, and the ribbon Paragraph group read right to left
rtl::Table now stacks its rows top to bottom whatever way the area around it runs (a ribbon group lays out in a row). English renders are pixel-identical (caret blink and a status toast differ in untouched dialogs). The TOC options and recipient filter/sort rows are converted by pattern and not seen in an image.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: Columns preset tiles and Preview label, Macros, Add/Remove arrows, Zoom slider and the Recipient List grid
A preset tile is as wide as its caption and centres it (the long Arabic captions ran into the next tile); the Preview column keeps its width so its label no longer wraps letter by letter; Macros puts the name box and list at the reading start with the buttons beside them; the Add >> and << Remove arrows swap in a mirrored interface so they point the way the items move; the Zoom slider is drawn left to right as in English; the Recipient List data grid scrolls left to right instead of running past the left edge. English renders are pixel-identical.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: the chart type and SmartArt layout galleries list their tiles from the right
The chart type dialog, the Insert SmartArt dialog and the ribbon's SmartArt Layouts gallery use rtl::Table rows, so the first tile sits at the reading start. English renders are pixel-identical.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Take main's panes/host.rs after the merge
The merge kept a use of mirrored() that main's pane-dock fix removed; this branch does not touch the panes.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: Columns preset captions are translated in the mirrored tile
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic: one Arabic and one French row in the localization parity table; About > Models columns read from the right
The merge left the Arabic and French rows twice in docs/localization-parity.md; each
is now a single row (main's current French text, the Arabic row with the dialogs
note). About > Models keeps main's fitted table but lists its columns, their
alignments and grow weights reversed when the interface is mirrored, so Company
starts at the reading edge. The credits.rs change comes from tareq's helper merge.
Co-authored-by: tareq <tareq.halaby@gmail.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* About > Models: the mirrored table keeps its own widths and scroll position
The columns are listed in reverse when the interface is mirrored, and egui keeps the
resizable column widths and the scroll offset by id. A language switched at run time
would apply one direction's widths to the other's columns, so the mirrored table uses
its own id.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: About > Models alignment mirrors as its comment says
The mirrored Models table reversed the per-column right-align flags but
did not negate them, so in Arabic the text columns stayed left-aligned and
the counts right-aligned, the opposite of the comment ("counts line up on
the right (left in RTL)"). Negate after reversing so the text sits at the
reading edge and the counts on the left. Keep this line when touching
models_ui.
* About > Models: a mirrored table that overflows opens at its reading edge
The reversed Arabic table puts Company in the rightmost column, but the
horizontal scroll area started at the left, so when the table was wider
than the dialog (narrow window, widened columns) Company and Model were
offscreen. Stick the scroll area to the right in a mirrored interface.
---------
Co-authored-by: Abdelhaq El Amraoui <abdelhaqelamraoui@gmail.com>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
Co-authored-by: email <email@email.com>
Co-authored-by: tareq <tareq.halaby@gmail.com>
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
* Gap 4: flag document fonts that aren't installed
The font box (ribbon, mini toolbar, both Font dialog boxes) shows a
warning mark when the current font isn't installed; its hover note
names the font drawn instead. The status bar says "N fonts not
installed" and lists each with the faces drawn instead, plus Add Font….
Agents get `font.missing` and `format.state.fontShownAs`.
Layout records, where it picks a face per text segment, the fonts the
shown text asks for that aren't installed and the faces drawn instead
(ParaLayout::substituted, DocLayout::substituted_fonts), so hidden
text, unused styles and orphaned stories never count; list labels,
field results and East Asian and complex-script text do, and so does a
missing roman font drawn in Cambria. Metric-compatible substitutes and
symbol fonts drawn as Unicode aren't flagged. Bounded for hostile
files: 64 pairs a paragraph, 1024 a document, names kept to 256
characters, 20 rows in the popup.
Ported from alehel/wordcraft#1 onto current main; English strings only
(translations belong in storytold/craft-i18n).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Gap 4: missing-font review fixes
- Judge a padded font name by the face layout drew for it, and skip blank names.
- Name the face CJK text is drawn in for a missing East Asian font, not Cambria.
- Keep the missing-fonts list per window, so several windows don't rebuild it every frame.
- Expose the font box's warning to screen readers as its description.
- Count missing fonts with craft-i18n plurals (`i18n::tn`).
- One table of metric twins (`fonts::word::METRIC_TWINS`): a missing font is drawn in an
installed twin first, and the warning reads the same table.
- Find the status-bar item by part of its label in the click test.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Gap 4: warn for a font picked at the caret; drop fonts of hidden list items
- At a collapsed caret the font box warns for a missing font typing will use, also at the end
of text in another font (it waited for the first letter).
- A list item that shows nothing (#3982) reports no missing font: its number was shaped, and
its font recorded, before layout dropped it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Gap 4: say where Add Font… is, and that it needs the font file
The font box's note said "Add Font… installs it": Add Font… opens a file picker at the end of
the list, so it only helps with a font file at hand.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Gap 4: docs say the popup lists 20, and when the font box warns ahead
CodeRabbit review: the status-bar popup lists the first 20 missing fonts, then a count; the font
box also warns at a collapsed caret for a font no shown text uses yet; `fontShownAs` is the
font's substitute, fallback faces aside.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Gap 4: the Font dialog warns for a missing font over a selection
CodeRabbit review: the dialog's boxes show the fonts OK applies, which no shown text may use
yet (an Asian text font over Latin text, a font typed into the dialog), so they name the
substitute whatever is selected. The ribbon's box over a selection still reads the list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Gap 4: the Asian font box names the face CJK text gets
CodeRabbit review: the status bar's list is by font name, so for a font Latin text also uses
it named the Latin text's substitute. The Asian text box now always looks up the face layout
draws Chinese, Japanese and Korean text in.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Gap 4: gaps.md status on the current line, missing-font scope and twin wording
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Gap 4: gaps.md says which missing fonts are flagged and what font.missing lists
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Gap 4: font.missing lists what the current view lays out
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Swedish (Finland) is built at run time, so no catalog row can match it. One helper
(ribbon::display_name) now translates the language, the region and the {language} ({region})
template separately and joins them; the Set Proofing Language list, the Language menu, the status
bar and the dialog all use it. English output is unchanged and matching never uses a name.
gap 8 no longer describes the missing-pack bar, which is in its own branch.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCYmv6UJmY2QcuhfXco
* #3867: review — header repeats, picture outlines and linked-box widths bounded the same way every layout
- Header repeats: a Clip (floating Drawing Canvas) counts its members, depth-bounded, so a 1000-member canvas no longer counts as one item (CodeRabbit thread 4373103686); the budget is per layout (Ctx), not per table.
- Tight-wrap outlines: each cache entry stores its picture's pixel cost; a cached hit is charged to the layout's decode budget like a decode, so cold and warm layouts (and the CLI) wrap alike.
- Linked boxes: widths are budgeted by laid-out work (MAX_FLOW_WORK), not 16 widths, so ordinary stories keep exact widths for every box.
- header_rows.contains -> index compare; layout-parity doc revision.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HUodYU9r4mPHed4pPsjHC2
* #3867: review — a picture that fails to decode still costs its pixels when cached; header repeats restored on retry
- contour: Alphas records the pixels each picture charged (costs map), also when the body then fails to decode, so the cache entry's cost is right and warm layouts charge it like cold ones.
- Snap saves and restores ctx.header_repeats so balance_pass retries don't keep their charge.
- Tests: truncated large PNG cold vs warm; canvas header row end to end through place_table; linked-chain bound <= 8; vertical box's layout differs from every other box's.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HUodYU9r4mPHed4pPsjHC2
* #3867: CodeRabbit — header and linked-box budgets count every clip descendant
placed_cost counts iteratively (explicit stack, stops past the limit) and is shared by flow_work.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HUodYU9r4mPHed4pPsjHC2
* #3867: docs — progress log, gap 20 note for layout resource caps and linear-time passes
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HUodYU9r4mPHed4pPsjHC2
* #3867: review — roadmap gives each cap its unit: header items, wrap-cache pixels, linked text box lines and items
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* #3867: CodeRabbit — the vertical-box check runs past the work cap too
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #3867: review — a linked chain's work counts the story it lays out, not only the lines it shows
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #3867: review — header-row cost import follows main's explicit layout imports (#4501)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #3867: review — a test pins the header repeats that column balancing gives back; docs keep main's caps row and both gap status lines
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
The Dictionaries folder moves here from Proofing with the Dictionary files list (#1063) kept. Set as
default sets only the saved default proofing language (the new pure review.language.preferred command), and
proof.packs returns the languages rows.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCYmv6UJmY2QcuhfXco
With no list of packs yet the bar offers a language with no dictionary and Install fetches the
list, then the pack. The caret's typing language counts, the spelling context menu heading is in
the interface language, and closing the bar is remembered per document, pack locale and tag.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCYmv6UJmY2QcuhfXco
Every published pack is named in English, Valencian is ca-ES-valencia, and rows are matched by
tag (language, script, region, variant), never by the name shown. One region helper
(packs::is_region, packs::without_region) next to pack_for_tag serves the engine and the UI.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCYmv6UJmY2QcuhfXco
* fix(docbin): keep one override per table cell instead of a copy per repeated sprm
* DOC import: vertical alignment reads only the cells a row can hold, like the other cell-range sprms
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Arabic interface: mirrored right-to-left window and Arabic UI fonts
Adds the Arabic (`ar`) interface language's code: its catalogs are craft-i18n's
`locales/ar`, so this changes no catalog.
- `ar` is registered in `i18n::LANGUAGES` and `Lang::rtl()` says it is written
right to left; its translations are used as written (egui's text layout
orders each line's bidi text itself). A ribbon location reads from the right
with a leftwards mark.
- `rtl.rs`: the window is mirrored. Containers open in `rtl::root`; columns,
grids, checkboxes, radio buttons, menus, rows, panels, the dialog tab strip
and the ribbon's scrolling row follow the language's direction. Title bar,
status bar, ribbon tabs and groups, File pages (including Print, with the
settings on the right and a solid scrollbar gutter), dialogs, menus and the
task panes (their docking edge swaps) are laid out from the right. egui's
`Grid` panics in a right-aligned layout, so grids go through `rtl::grid`.
- Arabic UI font fallback: the craft-fonts Arabic face, else an installed
Arabic font, loaded when the interface is Arabic.
- The "Auto (200%)" size label keeps its percent sign inside the isolated
number.
- Tests: Arabic locale, saved preference and lookup order on fixture catalogs;
an interface audit (skipped without the craft-i18n Arabic catalog) that lays
the app out right to left at several widths, checks tab, group, pane, Print
and Go To positions and that nothing panics.
The Arabic work builds on Abdelhaq El Amraoui's mirrored-interface PR (#737).
Co-Authored-By: Abdelhaq El Amraoui <abdelhaqelamraoui@gmail.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: pin craft-i18n at a commit with the Arabic catalog; review fixes
- craft-i18n.rev and the Flatpak manifest pin 19358491 (craft-i18n main), the
first commit line that has locales/ar/wordcraft.tsv. The old pin had no
Arabic catalog, so `ar` was registered but not embedded and two i18n tests
(the_language_setting_is_a_ui_command_and_persists,
the_languages_offered_are_the_embedded_ones_of_the_list) failed in CI.
- The Arabic font fallback is requested for any right-to-left interface
(`Lang::rtl()`), not only after the language picker sets the flag, so an
automatic or saved Arabic gets the installed Arabic face.
- The file browser, the update window and Reading Mode's toolbar run their
bodies in `rtl::root`, so their far-side buttons and rows are mirrored.
- A group in a right-to-left ribbon row is measured from the right edge: the
cursor's left edge is negative infinity there, so its width was NaN and the
ribbon planner dropped every group, never compacting a narrow Arabic window.
A narrow window now folds groups into drop-downs.
- The mirrored checkbox and radio marks are labelled by their text, so screen
readers name them.
- Tests: group width in a right-to-left row; the Arabic interface audit checks
Reading Mode's toolbar.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: ask for the installed Arabic font separately from the CJK one
A previous commit made every right-to-left interface request the installed CJK
fallback font (`system_cjk`) so that the installed Arabic font would load. That
also made every Arabic launch read a large system CJK font file when no
craft-fonts input is embedded (the Flatpak build has none).
`install_ui_fonts` now passes a separate `system_arabic` flag (`Lang::rtl()`):
the installed Arabic font is read for it, and `system_cjk` is again set only
by a CJK interface or by CJK text on screen. `WordApp::fonts_system_arabic`
remembers what was installed, so a language change reinstalls the fonts.
Tests: the_installed_arabic_font_is_asked_for_by_arabic_alone (the Arabic flag
adds the installed font only when none is embedded, and the CJK request alone
adds no Arabic font). Checked a headless screenshot of the Arabic interface
without craft-fonts: the installed Arabic font draws the labels.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Fix the AutoSave switch knob: on is at the right, mirrored in Arabic
The title bar's AutoSave knob was placed with `lead_x(rtl == on, ..)`, which
reverses main's mapping in both directions: left to right it drew the knob at
the left when the switch was on, and right to left at the right. main draws it
at the right when on and at the left when off, so the mirrored interface must
draw it at the left when on: `rtl != on`.
The position is now `autosave_knob_x(rtl, on, track)`, pinned by a test for all
four cases. A headless screenshot of the off switch shows the knob at the left
in English and at the right in Arabic.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: file names and paths in right-to-left lines; kerning row order
Tester feedback on the Arabic interface:
- File > Open's Recent list, the built-in file browser and the title bar drew
file names and paths raw, from the left edge. In an Arabic line the marks of
a name ("(نهائي) 2.docx") and the folders of a path with Arabic parts were
scrambled. Rows now start at the side reading starts from (`rtl::lead_x`),
names go through `i18n::isolate` (a first-strong isolate, with a left-to-right
mark before the extension so `2.docx` stays `2.docx`) and paths through
`i18n::isolate_path` (a left-to-right isolate with a mark after every
separator, so neighbouring Arabic folders do not swap). Other languages get
the text untouched; saved and spoken text never carries the marks.
- Font dialog, Kerning row: the dialog's grid is drawn left to right inside a
right-to-left window, so "Points and above" came after its number; in an
Arabic interface it now comes first, so the line reads "14 نقطة فأكثر" from the
right. (The grid's columns themselves still keep their left-to-right order.)
Tests: names_and_paths_are_isolated_in_a_right_to_left_interface.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: mirror through craft_ui::direction and Style::right_to_left
The suite's craft-ui now has the direction helpers (`craft_ui::direction`) and
its egui fork a `Style::right_to_left` that mirrors egui's own chrome. Use them
instead of our parallel wrappers:
- `rtl::sync(ctx)` applies the interface direction every frame the language's
changes (`direction::apply`): it sets the shared direction state and
`Style::right_to_left` on every theme, which draws check boxes and radio
buttons with the mark at the reading start, mirrors submenus, scroll bars,
title bars and the combo boxes' arrows (the Print page's choice lists, the
font list) and opens combo menus from the right.
- `rtl::checkbox`, `radio_value`, `radio` and `indeterminate_checkbox` are
gone: about 200 call sites use plain `ui.checkbox`, `ui.radio_value`, ... and
egui does the mirroring (and names the control by its text, as a plain widget).
- `lead_x`, `lead_center`, `lead_top`, `start_panel` and `end_panel` delegate to
`craft_ui::direction`. `root`, `flows`, `island`, `grid`, `menu`, `vertical`,
`far_side` and the other layout helpers stay: the shared crate has no
equivalent that fits them.
Visual changes: the combo boxes' drop-down arrows and lists are mirrored in
Arabic; nothing changes in left-to-right languages (checked headless
screenshots of the English main window, Font dialog and Print page).
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Recent files and the file browser: full path on hover, long names keep their start
Review feedback:
- Each row of File > Open's Recent list shows the document's full path as its
tooltip (the path line under the name can be longer than the row).
- A long name in the built-in file browser is laid out in one row, with an
ellipsis at its end, from the side reading starts from, instead of being
clipped at the row's edge: in a right-to-left interface the old text anchored
at the right edge cut the end of an Arabic name and the start of a Latin one.
The whole name is the row's tooltip when it was shortened.
Checked headless screenshots of the file browser with a long English and a long
Arabic name.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Font combos in a right-to-left row: the arrow joins its field on the left
The ribbon's font name and size boxes are drawn from a field and a separate
arrow box that share one outline: the field is square and the arrow's box is
rounded on the side where the arrow goes, painted a border width under the
field. That assumed the arrow is right of the field. In a right-to-left row
(the Arabic ribbon) the arrow comes after the field on its left, so the field
was square on the wrong side and the arrow box rounded on the side facing the
field: two boxes with a gap-like seam, the arrow looking outside the frame.
`arrow_box_shape(rtl, ..)` mirrors the radii and the underlap, and the field's
square corners are chosen by the row's direction (the nw/sw pair in right to
left). Left-to-right rows are drawn exactly as before (English before/after
crops are identical).
Test: the_arrow_box_is_rounded_away_from_its_field.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Pin craft-i18n 4612850 (merged Arabic WordCraft rows, craft-i18n#76)
The pin and the Flatpak manifest commit move from 1935849 to 4612850, which is on
craft-i18n main and adds the 70 Arabic rows this branch relies on.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Pin craft-i18n cac2cf0 (Arabic number agreement and status-bar rows)
Moves the pin and the Flatpak manifest commit from 4612850 to the current craft-i18n
main, which includes craft-i18n#95 (48bed03) and #81 (ef58ff3).
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic: isolate paths shown beside labels; mirror the Print page zoom
File > Info shows Location as its own left-to-right path label (cut short with the full path on hover, not wrapped), and the open-failure, Exported and dictionary-file messages isolate their paths. The Print preview zoom puts minus at the slider's left end and plus at its right in Arabic, as the status bar does.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic: mirror the label/field rows of the Font, Info, Paragraph, Page Setup, Insert Table and Options forms
rtl::Table lays a form out as an egui Grid in a left-to-right interface (same id, columns and spacing, so the output is unchanged) and, where the interface is mirrored, with each row's cells running from the right, every column as wide as its widest cell. File > Info puts Properties at the right and Statistics after it, and the Font dialog's kerning row reads 14 points and above.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* docs: record Arabic mirrored interface landing (#1195)
Update the language counts, Arabic parity row, gap #11, and UI/ROADMAP
status so they match the craft-i18n catalog and mirrored shell already
on this branch.
* Fix Organizer Copy arrow in RTL and refresh roadmap status.
Point the Copy glyph at the Document column when the shell is mirrored,
and bump docs/roadmap.md status/revision history for Arabic UI (#1195).
* fix(ui): keep pane dock left/right physical in RTL
ui.paneDock and view.stylesPaneDock now store and report physical window sides; only unset defaults still open on the reading-start edge. Also wrap the language-packs grid for RTL, document the contract, and load a system Arabic face for Arabic names in LTR UIs.
* docs: clarify mirrored default pane edges in RTL
Start-default panes open on the physical right in Arabic; end-default
panes open on the physical left — not every never-docked pane on the right.
* refactor(ui): one PaneState for a saved pane place
The four saved-dock arms built the same PaneState; only the place and
whether it was set explicitly differ.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* style(ui): rustfmt the panes re-exports
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: The Legend Of MTS Dev <tlo.mts.tsh@gmail.com>
Co-authored-by: Abdelhaq El Amraoui <abdelhaqelamraoui@gmail.com>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
Co-authored-by: email <email@email.com>
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
- PACK_INDEX: language-packs-2 index.json, sha256 b35c7aef…, built from craft-i18n 20467b63
- craft-proof pinned at storytold/craft-libs 47c9f625 (flag-based compounding, #497; review follow-ups and en-AU, #496)
- Options › Language: ProofLang::EnAu has no Hunspell dictionary name of its own (English uses SCOWL)
- docs: Danish, German, Dutch, Swedish, Norwegian, Hungarian, Estonian, Croatian, Persian and Esperanto are packs; Mongolian and Thai stay hidden
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Word brings a document's alternative format chunks (w:altChunk) in where they
stand when it opens the file; WordCraft left them out, so a document made of
one (as generators and mail-merge tools write them) opened empty.
- docx: read_with/ReadOptions with a ChunkImporter for formats other than
WordprocessingML; nested Word documents are read here (at most 4 deep,
256 chunks and 512 MB of chunk bytes a file, XML depth counted on).
- doc: Document::adopt (moved from paste) brings another document's media,
lists, styles, notes, comments and revisions along under new ids; pictures
in groups and charts are relinked. Insert > Text from File uses it and now
keeps the file's pictures and lists.
- engine: chunks in MHT, HTML (in their charset), RTF and plain text go
through the format importers.
- formats: MHT web archives open (MIME, quoted-printable/base64, charsets,
pictures by Content-Location or cid). HTML reads style element rules
(simple selectors, cascade, budgets), paragraph margins, indents, line
height, cell widths and borders; an opened page takes Word's web-page
defaults (Times New Roman 12 pt, single lines, black headings, automatic
spacing). html::decode knows the single-byte Windows code pages.
docxide-pdf suite: croatian_regulations_altchunk goes from one empty page to
Word's 8 pages, SSIM 2.7% -> 78.7%; no other document changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- engine `packs`: the packs Backend (the font store on the desktop and CLI, a fixed list in tests
and ui_shot), the pinned index, installs and removals through craft-font-store's
`language-pack` kind, craft-proof reading the store's `language-packs/` folder at once.
Commands open nothing and never turn downloading on (only an Install click in the app does);
confined automation can't write the packs folder outside its write root.
- ui-egui `language_packs`: File › Options › Language › Language packs (name, size, licence,
source, Install/Remove, progress, errors), the missing-pack bar (dismissible per document,
never for a language without a pack), About › Language data (full licence texts).
- CP4.4: `cargo xtask language` (in `ci`): the default build embeds only en-* Language data.
- CP4.5: docs (help, MCP, control protocol, gaps #8, localization parity, roadmap).
- Path deps to Lane 4's worktrees while developing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCX8LsYYE8fsj4byBm2
CodeRabbit on #5205:
- NOTICE: the SCOWL English dictionaries (en_US, en_GB-ise, en_CA) with
Kevin Atkinson's SCOWLv2 notice, Benjamin Titze's notice and Geoff
Kuenning's Ispell BSD licence for the affix files, as their licences ask of
distributions.
- docs/gaps.md: gap 8's evidence says each English checks its own SCOWL
2026 dictionary, with the #40 and #520 regression tests; #40 (closed) is no
longer listed as open. Status line and revision history.
Also: docs/localization-tr.md's craft-proof path change (3110dcf02, #5202)
and docs/architecture.md's no-data wording (b7dad64d9) get their status lines
and revision rows.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCX8LsYYE8fsj4byBm2
Word draws an arrowhead 2, 3 or 5 times the line's width long and wide
(small, medium, large; `a:headEnd`/`a:tailEnd` `len`/`w`), a line under
2 points as a 2-point one. Every arrowhead was drawn one size and saved
as a medium triangle: the kind, width and length are now read (DrawingML
and VML), kept and written back, and the size is drawn as Word does.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* #5066: .doc default font is the stylesheet's standard font
The .doc reader took the default character font from the font table's
first entry. A Word 365 .doc keeps Times New Roman there and names Aptos as
the stylesheet's standard font (Stshif.rgftcStandardChpStsh), so its text
came out in Times New Roman. The defaults are now the standard ASCII, East
Asian and complex-script (ftcBi) fonts, else entry 0 as before; runs'
sprmCRgFtc1 and sprmCFtcBi are read too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #5066: the complex-script standard font is read only when the header has it
ftcBi is optional in the Stshi, and the latent style data that follows it starts
with cbLSD (4): a header that leaves ftcBi out no longer makes cbLSD the
complex-script font.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #5066: a header ending with ftcBi = 4 keeps it
Review: a 4 at ftcBi's offset was taken for cbLSD even when the header ends
there, so a complex-script standard font of index 4 was lost. It is read as
left out only when more data follows.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Measured in Word for Windows: when a table row breaks across pages, a cell
aligned to the middle or bottom whose text all fits in the part of the row
left on the page is aligned within that part, as tall as the other cells'
text there (with its space after), and a cell whose text doesn't fit runs
from the top of the cell with the rest on the next page. WordCraft kept the
offset the whole row's height gave the cell, so a short centred label
beside a long cell went to the top of the next page and left its cell empty
on the first, and a long centred cell started far down the page.
The vertical offset each cell's content got is kept with the row, so a split
moves the content back to the top before it decides what fits.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Layout: tab leader dots spaced and placed as in Word
Measured in Word for Windows with six fonts at four sizes: Word spaces leader
dots by the dot's advance at the font size in whole 600-dpi pixels (the size
itself in whole pixels), so a TH SarabunPSK dot at 16 pt (2.59 pt) is drawn
every 2.64 pt and a Tahoma one at 22 pt every 6.6 pt. The dots sit on the
page's grid of that pitch, from the first place after the text before the
tab to the last one that ends before the text after it. WordCraft drew them
at the unrounded advance, half a dot after the text and 1.2 dots short of
the number, so a table of contents line had a dot or two more than Word's.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Layout: each leader dot's place comes from its grid index
The leader's dots were placed by adding the pitch to the last place, so on
a long leader the rounding of each addition added up. From 72 to 528 pt at
2.64 pt it came to more than the 0.001 pt allowed at the end, and the last
dot, which ends exactly on 528 pt, was left out. `leader_xs` now works out
each place as its grid index times the pitch.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Layout: name the leader slack and glyph limit
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Layout: leader dots use the font size rounded to whole pixels
Word rounds the font size to the nearest 600-dpi pixel before it rounds the
dot's advance (Arial 14 pt: 116.7 px, so 117, dots every 3.96 pt); taking the
floor drew them 3.84 pt apart, as measured at 11, 14, 17, 20 and 26 pt.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* leader_xs: saturate the glyph range end
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Lists: a level above counts its first number at the first deeper item
Word counts a list level that hasn't been used yet as started at its first
number when a deeper item comes first: after 10.1-10.4 with no level-1 item
before them, the next level-1 item is 11. WordCraft showed 10 in the deeper
labels but didn't count it, so the next level-1 item repeated it ("10.
Qualifications", then "10. Penalties" in a tender document whose sub-items
come first).
Counters::next_label now starts each unstarted level above the one it counts,
at that num's start override if it has one, else the level's start. Measured
in Word with ListFormat.ListString: 1.1, 1.2, 2., 3.; (1), (2), 2. when the
deeper text doesn't show level 1; 1.1.1., 1.2., 2. from level 3.
a_list_s_own_level_definitions_win expected the old count; its level 0 item
after level 1 items is now 2., as in Word.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Lists: record the counting fix in the progress log and gaps
AGENTS.md asks for the progress log and the gap list when work lands. The
ROADMAP progress log has the entry; gaps.md records that no ranked gap
changed. Each with its status line and revision.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Lists: test a num's start override for the level above
The deeper-item-first test now also gives the num a start override for
level 0 (10) under level-1 items: 10.1., 10.2., then 11. It fails if the
override is ignored for the level above (1.1., 1.2., 2.).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Test a start override of 5 and a restart after a level-1 item
Review: 5.1., 6., 6.1. with the num's start override, and level 2 restarting below the next level-1 item.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* #4734: the print job's PDF leaves out link annotations
craft-print refuses to fit a page with annotations to the paper ("flatten page annotations
before using shrink-to-fit"), and the desktop app always prints with ShrinkToFit, so any
document with a hyperlink or a TOC (its entries are links) failed to print. Links print
nothing; `PdfOptions::links` (default on) lets the print job leave them out. Exported PDFs
keep them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #4734: review — the print note is in every desktop column; gaps and progress log
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #4734: doc wording: the print PDF omits link annotations; hardware still to validate
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #4734: only the printer's PDF drops links; Save these pages as PDF keeps them
Session::print_job_pdf is what ui.printSubmit sends to the spooler, without
link annotations; Session::print_pdf (file.printPdf) keeps them again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* #4764: copy selected objects along an axis with Ctrl+Shift
* #4775: preserve aligned copies through scrolling and secondary selection
* docs: keep the gaps.md note in the status line and revision table
* docs: drop a stray blank line
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* #3631: index laid-out objects during connector rerouting
* docs: keep the gaps.md note in the status line and revision table
* docs: drop a stray blank line
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* #4848: corporate authors in bibliographies
A Word source whose author is an organisation (Create Source › Corporate Author)
stores it as `b:Corporate`, which the reader ignored: the source opened with no
author, citations fell back to the title and bibliography entries started with
the year. A bare name typed into Author was split into "Organization, W. H.".
- Source gains `corporate`, read from and written as `b:Corporate` (in place of a
name list: a role holds one or the other, ECMA-376 CT_NameOrCorporateType).
- Citations and bibliography entries write it as it is in every style; it gives
the source's tag and its place in an author-sorted list, and untagged sources
are matched by it.
- APA puts its full stop after a group author ("World Health Organization.
(2021).") instead of relying on the initials for it.
- Create Source has a Corporate Author box under Author; Edit Source opens with
it checked when the source has one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LvG6DxS4tKmWSLCiDPvb4G
* Match untagged sources by corporate author before personal author
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* M12: preserve custom-property bookmark links (#4767)
* M12: preserve bookmark links across property renames (#4767)
* M12: align custom-property preservation status dates (#4767)
* docs: keep the gaps.md note in the status line and revision table
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Row, column and cell settings applied to the caret's row, column and cell only, so
selecting the whole table and unticking "Allow row to break across pages" changed
one row and the others still split across pages.
- table.properties applies row height and rule, allow break and header row to every
selected row, the column width to every selected column, and the cell width and
vertical alignment to every selected cell (the caret's with nothing selected), in
one undo step.
- The dialog shows "Allow row to break" and "Repeat as header row" as mixed when the
selected rows differ; left alone they change nothing, clicked they set every row.
- The row-height rule box is named by "Specify height" for screen readers.
Claude-Session: https://claude.ai/code/session_01LvG6DxS4tKmWSLCiDPvb4G
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* M2 #4903: step each selected run from its own font size
* docs: keep the gaps.md note in the status line and revision table
* docs: drop a stray blank line
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* 4757: keep Arabic base letters when removing marks
* docs: keep the gaps.md note in the status line and revision table
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Fix#4750: walk note references and formatting runs together
* docs: keep the gaps.md note in the status line and revision table
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
