The pane drew each heading with `Button::selectable(..).truncate()`, so a heading wider than the
pane ended in an ellipsis and its text had to be read from the hover tooltip. Word wraps the row
instead.
`nav_heading` now wraps: the button takes `Button::wrap()` and a minimum size of the available width
and one row, so the label continues on further lines inside the pane, the row grows with the text,
and the pane still keeps its width. The trailing grow atom still keeps the text flush left under its
parent (#1199). The hover tooltip goes with the ellipsis: nothing is hidden now, and a word wider
than the pane is broken by the wrap instead of overflowing.
The navigation test asserts the wrap instead of the ellipsis. For a heading well past the width and
for a single word wider than the pane, the label has more than one line, is not elided, stays inside
the pane, does not widen it, and takes a taller row than a one-line heading in the same pane.
`docs/ui-parity.md` and `ROADMAP.md` record the new behaviour.
Co-authored-by: Brandon Thomas <brandon@storyteller.ai>
With no document open, the empty window greys the Share / Editing /
Comments buttons out by disabling the whole right-to-left line, and the
tab strip is a child of that line: egui gates interactions on a widget's
enabled state, so every tab was dead. File did nothing, and the empty
window had no way back to the Start screen, or to making a document.
Only those three buttons are disabled now. The test presses Escape on
the Start screen (the empty window, as #1129 has it), clicks the File
tab and asserts the Start screen, with its Blank document, is back.
* #2972: regression tests for File page / sidebar AccessKit focus paths
The macOS back chevron beside the traffic lights (the report's "sidebar
collapse toggle"; there is no other toggle there), File > New/Home > Blank
document, Escape, and File > Options > back (both layouts, with a document
and from the Start screen) all run under kittest's AccessKit. The chevron
and Options tests panic with "Focused ID ... is not in the node list"
before #2856 and pass on main.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* #2972: review — fresh document per Blank document path; Options back asserts closing and focus in every case
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012WEhZXSxzS8orX7f9J3qpr
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Paste: Ctrl+V pastes a clipboard picture even when Ctrl is released before V (#3049)
egui-winit keeps the Mod+V press, so a clipboard picture is pasted on V's
release, which required Mod still held. Letting Ctrl up first (the natural
one-hand Left Ctrl+V) pasted nothing. A V release with no V press seen was
Mod+V: use the modifiers held with Mod then, so Mod+Shift+V and Mod+Alt+V
stay apart.
Fixes#3049
* Paste: record the modifiers held with Mod in event order (#3049)
Mod can go down and up within one frame, so the frame's modifiers may no
longer have it when the canvas reads them. Take them from each
ModifiersChanged and key press as they arrive. Review feedback on #3058.
* Paste: document the Mod+V release helpers and tests (#3049)
* #3037: file browser says when a folder (or the filter) shows no items
* #3037: Czech and Vietnamese catalogs carry the file browser's no-items string
* #3037: show the no-items hint only for a folder that was read
An unreadable folder already shows its error below the list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <brandon@storyteller.ai>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Cross-reference: caption labels of your own are Reference types (#2940)
* Caption labels come from the SEQ field's caption, not a digit (#2940, review)
* Caption label after a chapter number field (#2940, review)
* #662: ribbon groups shrink to fit the window (compact, then one drop-down)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* #1285: collapsed ribbon groups stay open while used; Styles gallery trims before it folds
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Ribbon collapse: accessible name for folded groups, Tables/Links icons (#662)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Ribbon: Esc in a collapsed-group popup doesn't leave full screen; tab-strip test ignores same-named ribbon buttons (#1285)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Ribbon tab-strip test: pick the tab, not a same-named folded group (#662)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Ribbon: a folded group's open state is keyed by its place in the row, not just its title (#1285)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* rustfmt: collapsed_group signature (#1285)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Dmitrii Khlapov <19991457+dkhlapov@users.noreply.github.com>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* File (Backstage): an icon beside each side-menu item (#1714)
The side menu (Home, New, Open, Info, Save, Save As, Print, Export,
Close, Options) was text only. Each item now has an 18 pt icon in the
label colour, greyed out with it when no document is open. Existing
icons where they fit (house, new page, open folder, info, save, printer,
close), and three new ones drawn in code: Save As (the save disk with a
pencil), Export (a page with an arrow leaving it) and Options (a gear).
Original artwork, no asset files.
Test: every item names its own icon, and each one is a drawn icon, not
the letter-tile fallback an unknown name gets.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* docs: one Backstage row with both the Close (#1712) and side-menu icon (#1714) notes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Went through the whole Italian catalog. Fixed the ones that were wrong (Mailings is Lettere in Word, Redo is Ripristina, cursor commands say riga) and made some terms consistent (input penna, Disponi testo, Ombreggiatura).
Also marked Italian as reviewed in the localization doc and added myself to people.toml.
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* #1348: WIP
* #1348: keep comment drafts per document, keep them on a refused edit, write them before save/close/new/open
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #1348: a refused comment draft can be dropped; fields read-only where comments can't change
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #1348: ui-parity: one Task panes and Context menus row after the rebase
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Docs after rebasing on main
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #1348: keep the window open while a web save is unconfirmed; split the roadmap row by operation
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* #1348: pending comment drafts count as unsaved changes for the browser; a save error isn't hidden by a draft refusal
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* #1348: an agent can't replace the document over a pending comment draft without force
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Dmitrii Khlapov <19991457+dkhlapov@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* #778: .xls and legacy-encoding recipient lists; filter and sort recipients
- Recipient lists: legacy Excel 97-2003 .xls (BIFF8 reader on the cfb crate already in the
tree); Excel 5.0/95 and password-protected .xls refused with a clear message; a CSV named
.xls reads as text, an HTML one gets an error. .xls added to the picker filters (desktop,
web, built-in browser) and drop handling.
- Text lists (and plain-text import) detect legacy encodings when not UTF-8/UTF-16: GBK/GB18030,
Big5, Shift_JIS, EUC-KR, Windows code pages (encoding_rs + chardetng, MIT/Apache); an
`encoding` param overrides.
- mailings.filterRecipients / mailings.sortRecipients: field, comparison (equal, notEqual,
less, greater, lessOrEqual, greaterOrEqual, blank, notBlank, contains, notContains), value,
And/Or joins; sort keys. Preview, Finish & Merge and labels use only the matching records
in sort order. Edit Recipient List edits every record and keeps the filter.
- Recipient List dialog: Filter and Sort section and a merge-order column; catalog rows;
strings in every catalog; docs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* i18n: Hungarian and French strings for this change
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Review fixes for #885: total order for recipient sort, Bulgarian strings
- compare_cells now ranks numbers (compared numerically) before text (compared
case-insensitively), so it is a total order; a column mixing 9, 10 and 1a
could make slice::sort_by panic. Regression test sorts mixed columns.
- Bulgarian catalog: the 24 Filter and Sort strings.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #1287: placeholder (work in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #1287: keep the filter on a failed Edit Recipients; cap .xls/.xlsx cell text; dialog drops rules on unknown fields and caches the merge order
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #1287: rustfmt
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Dmitrii Khlapov <19991457+dkhlapov@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* References: Word sources file import in Manage Sources (#2640)
Manage Sources gains Import… and references.sources an "import": path
parameter: it reads a b:Sources document (Word's own Sources.xml) into the
document's sources with the same reader as a document's own bibliography
part. A tag already here is left alone, an untagged entry is matched by
title and author or gets a tag like a new source, the whole import is one
undo step, and a file that isn't b:Sources is refused. Desktop only; the
web build hides the button.
The docx reader now shares the b:Sources parser (crates/docx/src/
bibliography.rs) with the import, with the same dedupe and 10,000-source
cap; the hostile-input cap test still passes.
Tests: docx unit tests (names, kinds, accessed/DOI fallbacks, repeated
tags, empty entries, wrong root), engine import test (add, undo, second
import, untagged matching, refused file), ui tests (the dialog button asks
for a "sources" file; finish_pick imports), wordcraft-cli end to end
(import, cite, bibliography, save, reopen; the package's customXml
carries the sources). The button's label is in every interface catalogue.
ROADMAP progress log and docs/roadmap.md, gaps.md, file-format-parity.md
and target-app-parity.md get their rows.
* References: review fixes for the sources import (#2640)
- read_sources validates the root namespace instead of the local name alone:
an un-namespaced or unrelated <Sources> is refused, and both bibliography
namespaces read — OOXML's and Word's own 2004/10 (the VBA Source.XML
format), the latter mapped onto the canonical b prefix with parse_ns.
Tests: the 2004/10 namespace is accepted; a no-namespace or unrelated
root is refused.
- The import loop builds the tag and (title, author-or-editor) sets once and
keeps a per-stem counter, with the stem rule shared with auto_tag
(auto_tag_base). Importing thousands of untagged sources no longer costs
O(n^3). Test: untagged sources sharing a stem get Riv21, Riv211, Src, and
a second import adds none.
- docs/target-app-parity.md and docs/file-format-parity.md no longer claim
bibliography sources aren't saved in DOCX: #169 and #532 are closed and
the round trip exists (#790).
* References: doc comments for the sources import helpers (#2640)
Hoist the untagged-source matching helper (by_author) to module level and
document sources, auto_tag_base and sources_ui, so the functions this PR
touches meet CodeRabbit's docstring-coverage pre-merge check.
* References: re-apply the sources import's progress notes (#2640)
The rebase onto current main took upstream's copies of ROADMAP.md,
docs/file-format-parity.md and docs/gaps.md, because the rows this PR
adds conflicted with upstream's own appends. Re-apply them on the current
text: the progress log and revision rows, the bibliography row's
source-format note, and #15's evidence, with each status line's change
note. The other two documents (docs/roadmap.md, docs/target-app-parity.md)
merged cleanly and keep their rows.
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* #2573: Picture Format › Size takes sizes in any unit, pixels too, and opens a Size dialog
The picture size options were too limited (#2573, and #1901's request to enter pixels without
deforming the picture): the ribbon's W/H fields were points only, rejected "300 px", resized on
every keystroke (one undo step per digit), and there was no way to scale from the original
size, lock or unlock the aspect ratio, or reset the size.
- Picture Format › Size: W/H show the interface unit (Options › Advanced) and take a size typed
in any unit, `px` included; it applies on Enter as one undo step, and the other side follows
so the picture keeps its proportions. A drag still applies live.
- The Size group's launcher (and `picture.size` run without a size) opens a Size dialog: height
and width, scale of the original size or of the size it opened with, Lock aspect ratio,
Relative to original picture size, the original size with its pixels, and Reset.
- `picture.size {"original": true, "scale"?}` sizes from the picture's original size (its pixels
at 96 ppi, read from the image adjustments started from, less what is cropped). A size past
4000 pt that keeps the proportions now shrinks as a whole instead of flattening.
- New strings translated in every interface catalog.
The crop tool already exists (Picture Format › Size › Crop) and is being extended in #2027 and
#2440; options cut off in a narrow window are what #708 and #1293 (ribbon groups that shrink to
fit) address.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JZArmeAT48gF84aKj7Zx4C
* contributors: credit @matteo-andreuzza by their GitHub profile name
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JZArmeAT48gF84aKj7Zx4C
* #2573: Size keeps the proportions at the 1–4000 pt limits and follows the selection
Review follow-ups (CodeRabbit on #2889):
- Size dialog Reset on a photo larger than 4000 pt (a 6000 px wide one is 4500 pt) set it to
the original size, which `picture.size` then clamped side by side: the picture was flattened.
Reset now shrinks both sides by one factor.
- Locked, a side typed past the limit clamped the other on its own (15×30 pt with width 4000
became 4000×4000). Both sides now scale by one factor.
- `fit_size` (engine) only shrank: a proportional size under 1 pt (scale 1% of 50×200 pt) became
1×2 pt. It now picks the factor nearest 1 that brings both sides within 1–4000 pt, falling
back to side-by-side clamping only for shapes too long and thin for any; the dialog uses it.
- Dialogs aren't modal: picking another picture while the Size dialog was open made OK size it
with the first one's numbers. The form now follows the selection (starts over on the new
object, closes when nothing is left to size).
- Doc comments on the Size form's methods.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JZArmeAT48gF84aKj7Zx4C
* #2573: Size dialog reads the picture again after a crop, change or resize
Review follow-ups (CodeRabbit on #2889):
- The open Size form only compared the selected object's position. A crop from the ribbon,
Change Picture or a handle drag while the dialog is open left Reset and OK working from the
old crop and size. The form now remembers the picture, crop and size it was read from (bit for
bit, without comparing whole objects that may hold large embedded data) and reads them again
when any changes.
- An egui harness test drives the dialog end to end: launcher, a height typed in pixels, nothing
applied before OK, OK sizes in proportion as one undo step and closes the dialog.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JZArmeAT48gF84aKj7Zx4C
* #2573: size fields never resize a picture just by showing it
Review follow-up (CodeRabbit on #2889): egui's DragValue clamps a value already outside its
range when it is drawn and reports that as a change. The Size fields act on changes, so:
- Picture Format's W/H resized a picture smaller than 1 pt (a 1×1 px spacer is 0.75 pt) or
larger than 4000 pt as soon as the tab was shown, an edit and an undo step nobody asked for.
The code before this PR had the same problem with its 4–2000 pt range.
- The Size dialog's scale fields silently changed a picture enlarged past 10000% (a small icon
made large), and its lengths a size outside 1–4000 pt, which OK then applied.
The range now bounds only what is typed or dragged (`clamp_existing_to_range(false)`). Both
regression tests fail without it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JZArmeAT48gF84aKj7Zx4C
* #2573: Shape Format and Chart Design size fields leave existing sizes alone too
Review follow-up (CodeRabbit on #2889, outside the diff): the same egui clamp as in d56a105.
Shape Format's W/H (4–2000 pt) and Chart Design's (36–2000 pt) clamped a size outside their
range as soon as the tab was shown and resized the object unasked. The new Size dialog makes this
easier to reach, since it takes shapes up to 4000 pt, but a thin line under 4 pt was already cut.
Both now show such a size as it is and act only on a new value. Shape Format's range follows
`picture.size` (1–4000 pt), so dragging a 3000 pt shape no longer snaps it back to 2000.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JZArmeAT48gF84aKj7Zx4C
* #2573: Esc cancels a size typed in Picture Format; a typed size applies when the field is left
Review follow-up (CodeRabbit on #2889, outside the diff) asked to apply typed sizes on Enter only.
That is not done: a field keeps what was typed when it loses focus, as text fields do, and
otherwise typing a height in the Size dialog and clicking OK would throw it away. A harness test
now pins that path with a real click (press, then release frames later).
Checking it turned up a real bug: Esc did not cancel in the ribbon's W/H fields. egui 0.36 keeps
a DragValue's typed text after Esc and applies it the next frame, when the field still counts as
having just lost focus but Esc is no longer pressed. The fields now remember when Esc ended the
typing and drop that late value. (In the dialog Esc cancels the whole dialog, so nothing applies
there either; both are tested.)
Docs and comments now say "applied once typed (Enter, Tab or a click elsewhere; Esc cancels)"
instead of "applied on Enter".
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JZArmeAT48gF84aKj7Zx4C
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Proofing: say when a dictionary is installed but unreadable, with file and reason (#2830)
* proof test: use SHIFT_JIS as the unsupported encoding (ISO 8859-1 is decoded since #2904)
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* File page: the back arrow no longer ends WordCraft when accessibility is on
A click outside the page hands the keyboard back to it at once
(refocus_after_chrome_click), by the page's widget id from the last frame
that drew it. When the click was the File page's back arrow, the File page
was closed in the same pass, so the page had not been drawn in it: egui kept
focus on a widget missing from that pass, and with AccessKit running (a
screen reader, or any UI Automation client on Windows) AccessKit's tree
rejected the update ("Focused ID ... is not in the node list") and the
program ended without a word. 0.8.0 on Windows vanished after Blank
document, File, then the back arrow.
The page's id is now kept with the pass that drew it, and focus is requested
by id only in that pass; otherwise want_focus hands the keyboard over in the
next frame, as it already did. The same path covered File > New > Blank
document with a document open.
Test: back_arrow_returns_to_the_page_with_accessibility_on clicks the arrow
in the harness (which always runs AccessKit); it panicked with AccessKit's
message before the change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* control input: widget_id now carries its pass (match the pair)
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
move_object anchored the object to the paragraph under the drop point and
computed the offset from that paragraph origin. With a Square-wrapped object
the surrounding text reflows once the object moves away, so the first
paragraph of the target page - the anchor when dropping near its top -
slides back to the previous page and the object follows it.
Re-check the page after placing an object across pages and re-anchor when the
placement did not land on the target page (up to three attempts). Same-page
moves still place once, so resize and nudge are unchanged.
Adds a kittest that presses, moves and releases onto the top of the next page
and asserts the object stays on the page under the pointer.
Co-authored-by: Brandon Thomas <echelon@gmail.com>
While a floating picture, shape or text box is dragged, the page raster is
not repainted (the texture cache key does not include the drag state) and a
translucent preview is pasted at the pointer. The user therefore sees the
original copy at full opacity plus the preview, i.e. two copies of the same
object.
Exclude only the dragged object from that page's display pass, and repaint
that page once when the drag starts and once when it ends; the preview keeps
using the previous texture. The rest of the page is left untouched (no
full-page clear, no per-frame repaint).
Adds three tests: a dragged inline object and a dragged floating shape are
left out of their page, and the view key changes when a drag takes an object
off the page.
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* #2108: File › Print scales pages to another paper size
Scale to paper size on File › Print (Word: Pages per sheet › Scale to
paper size): No Scaling or any Layout › Size paper (Letter, Legal, A4, …).
Every page is scaled to the paper and centred, the paper turned to the
page's orientation, in the preview, the print job and Save these pages
as PDF. Native jobs also ask the spooler for that media. The document's
page size is unchanged. New `paper` param on ui.print/ui.printSubmit and
file.printPdf; unknown papers are errors.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* pdf: bookmark destinations from #2364 use the scaled Fit too
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* #1230: Insert Caption on pictures and shapes; Page Setup header and footer options
- Right-clicking a picture, shape, text box or chart offers Insert Caption…, as in Word.
- references.caption with a picture or shape selected puts the caption next to the
paragraph holding it, in the same cell or text box (it used to go after the whole table).
- The Caption dialog proposes Figure for a picture selected in a table, not Table.
- Page Setup: Headers and footers check boxes (Different Odd & Even Pages, Different First
Page), applied on OK only if changed, in one undo step; a title page can go unnumbered.
- Tests: engine caption_for_an_object_in_a_cell_stays_in_the_cell; kittest
right_click_on_a_picture_offers_insert_caption and
page_setup_different_first_page_leaves_the_title_page_unnumbered.
- Docs: ui-parity, target-app-parity, ROADMAP progress log.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P8veLveuUsJJm6UEcQPEuW
* ui-parity: keep Insert Caption on the context-menu row
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* #2601: Drop Cap Options dialog
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* gaps: keep the Drop Cap Options note on the dialog-depth row
* i18n: translate the two Drop Cap disabled reasons in the audited catalogs
---------
Co-authored-by: Dmitrii Khlapov <19991457+dkhlapov@users.noreply.github.com>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Hover hints give the command's own reason, cover split-button arrows, menu buttons and the font/size/outline boxes, and show on keyboard focus.
Co-authored-by: Dmitrii Khlapov <19991457+dkhlapov@users.noreply.github.com>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* #2551: dragging the scrollbar names the page at the top of the window
While the canvas's vertical scrollbar is dragged, a tip beside the pointer
says which page is at the top of the window, in the status bar's words
("Page 7 of 10"), so a drag through a long document shows where it will land.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #2551: the scrollbar tip names the page whose visible band is at the top, also with Hide White Space
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
No Color removed the highlight from the selection, but the Highlight
split button kept the colour picked before, so the next click on it
highlighted again. As in Word, No Color now becomes the button's choice
and the next click removes highlighting. The ribbon and the mini toolbar
share one highlight menu (the ribbon's copy is gone); No Color is
translated in the mini toolbar and no longer shows Ctrl+Alt+H beside it
in the ribbon.
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* SmartArt: typing with the graphic selected types into an item
Typing with a SmartArt graphic selected replaced the whole graphic with
the typed text. Now the text goes at the end of the current item (the
first before any is picked) and the Text Pane opens, as in Word. The
typing is one undo step.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* SmartArt: double-click or the frame button opens the Text Pane
A double-click on a SmartArt graphic opens its Text Pane. While a
graphic is selected, a Text Pane button sits on the left edge of its
frame, as in Word, and shows or hides the pane.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* SmartArt: the Text Pane closes with the graphic's selection
It opened by itself on the next graphic selected, because the pane flag
outlived the selection. The frame button hides while the pane is open.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Each item shows a small drawn outline of what it inserts (rectangle,
oval, triangle, star, elbow connector...). The icons are drawn in code in
icons.rs as shape.<kind>; widgets::icon_menu_item draws the item.
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Ruler numbers now thin out as the page shrinks on screen: a number
every 1, 2, 4, 8... units, whichever keeps them at least 30 px apart,
and the small ticks drop out below 4 px, with the text at its usual
size. A number gives way to an indent, tab or column marker sitting on
it, and the margins get ticks only. Both rulers use the caret page's
rect and scale in every layout, including One Page and Multiple Pages,
and follow the caret to another page. Tests cover the density rule, the
marks, the marker rule for indents, tab stops (set or dragged) and
table columns and rows, and the multi-page geometry.
Co-authored-by: Brandon Thomas <echelon@gmail.com>
The Quick Access Toolbar's menu ends with Hide Quick Access Toolbar, as Word's does. Show Quick Access Toolbar brings it back from the ribbon's right-click menu and from a check box on Customize Ribbon's Quick Access Toolbar page. The setting is kept between runs, and keytips skip the toolbar's digit badges while it is hidden. The UI command ui.quickAccessToolbar drives it from scripts and MCP. Regenerates docs/parity-checklist.md, which was behind the catalog. Adds my contributor entry.
Co-authored-by: Brandon Thomas <echelon@gmail.com>
#2448's imported-Word close test predates #1996 (File › Close keeps the window), and #2492's French catalog carries keys the Polish catalog lacks, as the PR's own test change said.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Adds the 402 entries the French catalog lacked: equation gallery (matrices, accents, brackets, integrals, operators, functions), built-in style and table-style names, citation styles, paper sizes, watermarks, and the Bookmark, Go To and Print dialog strings. Drops the obsolete 'Style: APA' entry. Terminology reviewed by a native French speaker and Word user. The Polish superset test exempts fr like the other catalogs carrying newer strings. Progress docs and people.toml updated.
Co-authored-by: Vivien JANNY <vivien@avertissance.fr>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
