Files
vectorcraft/crates/engine/src/tests_linkspanel.rs
T
dotCooCoo 6b0d1ed1c0 Crop Image: trim checks the image's RGBA size before decoding it
Crop Image's trim (object.cropImage {trim: true}) decoded the image
within MAX_RASTER_ALLOC (2 GB) and then converted it to RGBA. The
decoder holds the decoded image, before conversion, to that allowance,
so a gray or 1-bit image within it could take up to four times as much
once converted.

Trim now reads the image's size from its header first and, when
width × height × 4 is over the allowance, fails before anything is
decoded, with the check and message Load Texture uses: "an image of
W × H pixels is too large to draw". Images within the allowance are
trimmed as before.
2026-10-17 12:48:19 +07:00

317 lines
16 KiB
Rust
Raw Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
//! The Links panel's commands: listing images with their status (`links.list`), Go To, Embed and
//! Unembed, Link Info and the Placement Options a relinked file follows.
use serde_json::{Value, json};
use vectorcraft_doc::{NodeKind, PlacementOptions};
use super::tests_links::{BLUE, Folder, RED, bounds, centre_colour, image, near, open, place, png, save, session, write};
use super::*;
fn run(s: &mut Session, id: &str, p: Value) -> Value {
s.execute(id, &p).unwrap_or_else(|e| panic!("{id} {p}: {e}"))
}
/// Place the file at `path` embedded → its id.
fn place_embedded(s: &mut Session, path: &str) -> NodeId {
let r = run(s, "file.place", json!({"path": path, "at": [200, 150], "link": false}));
NodeId(r["ids"][0].as_u64().unwrap())
}
/// A PNG that says it is `w` × `h` 1-bit grey pixels (its header and no rows, which is all that
/// placing and listing read).
pub(crate) fn png_header(w: u32, h: u32) -> Vec<u8> {
let mut out = b"\x89PNG\r\n\x1a\n".to_vec();
let ihdr: Vec<u8> = [&b"IHDR"[..], &w.to_be_bytes(), &h.to_be_bytes(), &[1, 0, 0, 0, 0]].concat();
for chunk in [&ihdr[..], b"IDAT\x78\x9c", b"IEND"] {
out.extend((chunk.len() as u32 - 4).to_be_bytes());
out.extend(chunk);
out.extend(crc32fast::hash(chunk).to_be_bytes());
}
out
}
/// An image past what a decode may take isn't drawn: Place and Open say so and the Links panel's
/// row carries the note, where the image used to be blank with no word (#1479).
#[test]
fn an_image_too_large_to_draw_is_reported() {
const NOTE: &str = "an image of 200000 × 200000 pixels is too large to draw";
let dir = Folder::new("huge");
let (big, small) = (dir.file("wall.png"), dir.file("small.png"));
write(&big, &png_header(200_000, 200_000));
write(&small, &png(40, 20, BLUE));
let mut s = session();
assert_eq!(run(&mut s, "file.place", json!({"path": big, "at": [200, 150], "link": false}))["warnings"], json!([NOTE]));
assert_eq!(run(&mut s, "file.place", json!({"path": small, "at": [20, 20], "link": false}))["warnings"], json!([]));
let l = run(&mut s, "links.list", json!({}));
let notes: Vec<&Value> = l["links"].as_array().unwrap().iter().map(|r| &r["note"]).collect();
assert_eq!(notes, [&Value::Null, &json!(NOTE)], "top first: the small image has nothing to say");
// Opened as a document: said too. An image that decodes (16,000 px square) has no note.
assert_eq!(crate::cmd::fileio::load("wall.png", &png_header(200_000, 200_000)).unwrap().warnings, [NOTE]);
assert!(crate::cmd::fileio::load("fine.png", &png_header(16_000, 16_000)).unwrap().warnings.is_empty());
}
fn close(a: f64, b: f64) -> bool {
(a - b).abs() < 1e-6
}
#[test]
fn embed_keeps_the_pixels_without_the_file() {
let dir = Folder::new("embed");
let pic = dir.file("photo.png");
let bytes = png(600, 300, RED);
write(&pic, &bytes);
let mut s = session();
let id = place(&mut s, &pic);
let placed = bounds(&s, id);
run(&mut s, "select.set", json!({"ids": []}));
assert!(s.execute("links.embed", &json!({})).is_err(), "nothing selected");
run(&mut s, "select.set", json!({"ids": [id.0]}));
assert_eq!(run(&mut s, "links.embed", json!({})), json!({"embedded": [id.0], "missing": []}));
let im = image(&s, id);
assert!(im.link.is_none());
assert_eq!(s.doc().unwrap().doc.images[&im.key].bytes.as_slice(), bytes.as_slice(), "the file's own bytes");
assert_eq!(bounds(&s, id), placed);
run(&mut s, "edit.undo", json!({}));
assert!(image(&s, id).link.is_some(), "one undo step");
run(&mut s, "edit.redo", json!({}));
// Saved and reopened without the file: the full pixels, nothing missing.
let doc_path = dir.file("poster.vectorcraft");
save(&mut s, &doc_path);
std::fs::remove_file(&pic).unwrap();
let r = open(&mut s, &doc_path);
assert_eq!(r["missingLinks"], json!([]), "{r}");
let im = image(&s, id);
assert!(!s.doc().unwrap().doc.images[&im.key].is_proxy());
assert!(near(centre_colour(&s.doc().unwrap().doc), RED));
}
#[test]
fn a_missing_file_showing_its_preview_stays_linked() {
let dir = Folder::new("embed-missing");
let pic = dir.file("photo.png");
write(&pic, &png(600, 300, RED));
let mut s = session();
let id = place(&mut s, &pic);
let doc_path = dir.file("poster.vectorcraft");
save(&mut s, &doc_path);
std::fs::remove_file(&pic).unwrap();
open(&mut s, &doc_path);
assert_eq!(run(&mut s, "links.embed", json!({"ids": [id.0]})), json!({"embedded": [], "missing": [id.0]}));
assert!(image(&s, id).link.is_some());
assert!(s.doc().unwrap().history.undo.is_empty(), "nothing changed");
}
#[test]
fn unembed_writes_the_bytes_and_links_to_them() {
let dir = Folder::new("unembed");
let pic = dir.file("photo.png");
let bytes = png(600, 300, RED);
write(&pic, &bytes);
let mut s = session();
let id = place_embedded(&mut s, &pic);
let placed = bounds(&s, id);
// No path: the file's bytes come back and nothing changes.
let r = run(&mut s, "links.unembed", json!({"id": id.0}));
assert_eq!(r["name"], "photo.png");
assert_eq!(vectorcraft_format::base64_decode(r["dataBase64"].as_str().unwrap()).unwrap(), bytes);
assert!(image(&s, id).link.is_none());
// To a path: written there, and the image links to it.
let out = dir.file("out/photo.png");
std::fs::create_dir_all(dir.file("out")).unwrap();
let r = run(&mut s, "links.unembed", json!({"id": id.0, "path": out}));
assert_eq!(r, json!({"id": id.0, "path": out}));
assert_eq!(std::fs::read(&out).unwrap(), bytes);
let link = image(&s, id).link.unwrap();
assert_eq!((link.path.as_str(), link.size), (out.as_str(), Some(bytes.len() as u64)));
assert_eq!(bounds(&s, id), placed);
assert_eq!(run(&mut s, "links.check", json!({}))["links"][0]["status"], "ok");
assert!(s.execute("links.unembed", &json!({"id": id.0, "path": out})).is_err(), "linked already");
run(&mut s, "edit.undo", json!({}));
assert!(image(&s, id).link.is_none(), "one undo step");
// Another extension converts.
let jpg = dir.file("photo.jpg");
run(&mut s, "links.unembed", json!({"id": id.0, "path": jpg}));
assert_eq!(std::fs::read(&jpg).unwrap()[..2], [0xff, 0xd8]);
assert!(near(centre_colour(&s.doc().unwrap().doc), RED));
run(&mut s, "edit.undo", json!({}));
assert!(s.execute("links.unembed", &json!({"id": id.0, "path": dir.file("photo.psd")})).is_err(), "not a format it writes");
}
#[test]
fn go_to_selects_the_image() {
let dir = Folder::new("goto");
let pic = dir.file("photo.png");
write(&pic, &png(600, 300, RED));
let mut s = session();
let id = place(&mut s, &pic);
run(&mut s, "shape.rectangle", json!({"x": 0, "y": 0, "width": 10, "height": 10}));
assert_ne!(s.doc().unwrap().selection.objects, vec![id]);
let r = run(&mut s, "links.goTo", json!({"id": id.0}));
assert_eq!(r, json!({"id": id.0, "bounds": [-100.0, 0.0, 500.0, 300.0]}));
assert_eq!(s.doc().unwrap().selection.objects, vec![id]);
let rect = s.doc().unwrap().doc.layers[0].children().unwrap()[1].id;
assert!(s.execute("links.goTo", &json!({"id": rect.0})).is_err(), "not an image");
}
#[test]
fn the_list_shows_each_image_with_its_status() {
let dir = Folder::new("list");
let (a, b) = (dir.file("a.png"), dir.file("b.png"));
write(&a, &png(600, 300, RED));
write(&b, &png(40, 20, BLUE));
let mut s = session();
let linked = place(&mut s, &a);
let embedded = place_embedded(&mut s, &b);
let l = run(&mut s, "links.list", json!({}));
let rows = l["links"].as_array().unwrap();
assert_eq!(rows.len(), 2);
// Top first.
assert_eq!((rows[0]["id"].as_u64(), rows[0]["status"].as_str(), rows[0]["name"].as_str()), (Some(embedded.0), Some("embedded"), Some("b.png")));
assert_eq!(
(rows[1]["id"].as_u64(), rows[1]["status"].as_str(), rows[1]["path"].as_str(), rows[1]["format"].as_str()),
(Some(linked.0), Some("ok"), Some(a.as_str()), Some("PNG"))
);
assert_eq!((rows[1]["pixelWidth"].as_u64(), rows[1]["pixelHeight"].as_u64()), (Some(600), Some(300)));
write(&a, &png(300, 300, BLUE));
let l = run(&mut s, "links.list", json!({"sort": "status"}));
assert_eq!((l["modified"].as_u64(), l["embedded"].as_u64(), l["missing"].as_u64()), (Some(1), Some(1), Some(0)));
assert_eq!(l["links"][0]["status"], "modified", "modified before embedded");
let l = run(&mut s, "links.list", json!({"show": "embedded"}));
assert_eq!(l["links"].as_array().unwrap().len(), 1);
std::fs::remove_file(&a).unwrap();
assert_eq!(run(&mut s, "links.list", json!({"show": "missing"}))["links"][0]["id"], linked.0);
assert_eq!(run(&mut s, "links.list", json!({"sort": "name"}))["links"][0]["name"], "a.png");
assert!(s.execute("links.list", &json!({"show": "broken"})).is_err());
assert!(s.execute("links.list", &json!({"sort": "size"})).is_err());
}
#[test]
fn link_info_has_the_file_and_placement_details() {
let dir = Folder::new("info");
let pic = dir.file("photo.png");
let bytes = png(600, 300, RED);
write(&pic, &bytes);
let mut s = session();
let id = place(&mut s, &pic);
let i = run(&mut s, "links.info", json!({"id": id.0}));
assert_eq!((i["status"].as_str(), i["fileName"].as_str(), i["format"].as_str()), (Some("ok"), Some("photo.png"), Some("PNG")));
assert_eq!(std::path::Path::new(i["location"].as_str().unwrap()), dir.0.as_path());
assert_eq!((i["fileSize"].as_u64(), i["pixelWidth"].as_u64(), i["colorMode"].as_str()), (Some(bytes.len() as u64), Some(600), Some("RGB")));
assert_eq!((i["ppi"].clone(), i["effectivePpi"].clone(), i["scale"].clone()), (json!([72.0, 72.0]), json!([72.0, 72.0]), json!([100.0, 100.0])));
assert!(i["modified"].as_u64().is_some());
assert_eq!(i["placement"], json!({"preserve": "bounds", "align": "center", "clip": false}));
run(&mut s, "select.set", json!({"ids": [id.0]}));
run(&mut s, "object.scale", json!({"sx": 50}));
run(&mut s, "object.rotate", json!({"angle": 30}));
let i = run(&mut s, "links.info", json!({}));
let num = |v: &Value, k: usize| v.get(k).and_then(Value::as_f64).unwrap();
assert!(close(num(&i["scale"], 0), 50.0) && close(num(&i["effectivePpi"], 0), 144.0), "{i}");
assert!(close(i["rotation"].as_f64().unwrap(), 30.0), "counter-clockwise: {i}");
let embedded = place_embedded(&mut s, &pic);
let i = run(&mut s, "links.info", json!({"id": embedded.0}));
assert_eq!((i["status"].as_str(), i["linked"].as_bool(), i["fileName"].as_str()), (Some("embedded"), Some(false), None));
}
/// A 600×300 pt image at the centre of the artboard, its placement options set to `options`,
/// relinked to a 300×100 px file → the image's id and session.
fn relinked(name: &str, options: Value) -> (Session, NodeId, Folder) {
let dir = Folder::new(name);
let (pic, other) = (dir.file("photo.png"), dir.file("blue.png"));
write(&pic, &png(600, 300, RED));
write(&other, &png(300, 100, BLUE));
let mut s = session();
let id = place(&mut s, &pic);
let mut p = options;
p["ids"] = json!([id.0]);
run(&mut s, "links.placementOptions", p);
run(&mut s, "links.relink", json!({"ids": [id.0], "path": other}));
(s, id, dir)
}
#[test]
fn a_relinked_file_follows_the_placement_options() {
let b = |s: &Session, id| {
let r = bounds(s, id);
[r.x0, r.y0, r.x1, r.y1].map(|v| (v * 1e6).round() / 1e6)
};
// The old bounds: -100, 0, 500, 300.
let (s, id, _d) = relinked("pl-bounds", json!({"preserve": "bounds"}));
assert_eq!(b(&s, id), [-100.0, 0.0, 500.0, 300.0], "stretched into the bounds");
let (s, id, _d) = relinked("pl-fit", json!({"preserve": "fit"}));
assert_eq!(b(&s, id), [-100.0, 50.0, 500.0, 250.0], "proportional, centred");
let (s, id, _d) = relinked("pl-transforms", json!({"preserve": "transforms"}));
assert_eq!(b(&s, id), [50.0, 100.0, 350.0, 200.0], "at the same 100%");
let (s, id, _d) = relinked("pl-file", json!({"preserve": "fileDimensions", "align": "topLeft"}));
assert_eq!(b(&s, id), [-100.0, 0.0, 200.0, 100.0]);
let (mut s, id, d) = relinked("pl-fill", json!({"preserve": "fill", "align": "left", "clip": true}));
assert_eq!(b(&s, id), [-100.0, 0.0, 800.0, 300.0], "covers the bounds");
let clip_group = |s: &Session| {
let doc = &s.doc().unwrap().doc;
let g = doc.node(doc.parent_of(id).unwrap()).unwrap();
let NodeKind::Group { children, clip: true } = &g.kind else { panic!("not clipped: {g:?}") };
(g.id, children[0].geometric_bounds().unwrap())
};
let (group, clip) = clip_group(&s);
assert_eq!(clip, vectorcraft_geom::Rect::new(-100.0, 0.0, 500.0, 300.0), "clipped to the old bounds");
// Relinked again: the same clip group, its path following.
run(&mut s, "links.relink", json!({"ids": [id.0], "path": d.file("photo.png")}));
assert_eq!(clip_group(&s).0, group);
run(&mut s, "edit.undo", json!({}));
run(&mut s, "edit.undo", json!({}));
assert!(
matches!(s.doc().unwrap().doc.node(s.doc().unwrap().doc.parent_of(id).unwrap()).unwrap().kind, NodeKind::Layer { .. }),
"one undo step each"
);
}
#[test]
fn placement_options_read_set_and_round_trip() {
let dir = Folder::new("placement");
let pic = dir.file("photo.png");
write(&pic, &png(600, 300, RED));
let mut s = session();
let id = place(&mut s, &pic);
run(&mut s, "select.set", json!({"ids": [id.0]}));
assert_eq!(run(&mut s, "links.placementOptions", json!({})), json!({"placement": {"preserve": "bounds", "align": "center", "clip": false}}));
let r = run(&mut s, "links.placementOptions", json!({"preserve": "fill", "align": "topRight", "clip": true}));
assert_eq!(r, json!({"ids": [id.0], "placement": {"preserve": "fill", "align": "topRight", "clip": true}}));
assert!(s.execute("links.placementOptions", &json!({"preserve": "stretch"})).is_err());
assert!(s.execute("links.placementOptions", &json!({"align": "middle"})).is_err());
// Saved and opened again.
let doc_path = dir.file("poster.vectorcraft");
save(&mut s, &doc_path);
let saved: Value = serde_json::from_slice(&std::fs::read(&doc_path).unwrap()).unwrap();
assert_eq!(
saved["document"]["layers"][0]["kind"]["children"][0]["kind"]["placement"],
json!({"preserve": "fill", "align": "topRight", "clip": true})
);
open(&mut s, &doc_path);
let want = PlacementOptions { preserve: vectorcraft_doc::links::Preserve::Fill, align: vectorcraft_doc::links::Align::TopRight, clip: true };
assert_eq!(image(&s, id).placement, want);
run(&mut s, "select.all", json!({}));
run(&mut s, "links.placementOptions", json!({"preserve": "bounds", "align": "center", "clip": false}));
save(&mut s, &doc_path);
let saved: Value = serde_json::from_slice(&std::fs::read(&doc_path).unwrap()).unwrap();
assert_eq!(saved["document"]["layers"][0]["kind"]["children"][0]["kind"]["placement"], Value::Null, "the default isn't written");
}
#[test]
fn the_links_commands_are_reachable_headless() {
for id in [
"links.list",
"links.goTo",
"links.embed",
"links.unembed",
"links.info",
"links.placementOptions",
"links.relink",
"links.update",
"links.check",
] {
let c = crate::find_command(id).unwrap_or_else(|| panic!("{id} is not a command"));
assert!(!c.params.is_empty(), "{id} documents its params");
}
// Without a document every one says why instead of failing silently.
let mut s = Session::new();
assert!(s.execute("links.list", &json!({})).is_err());
}