Expose existing Warp styles, orientation and percentage controls through the shared live effect dialog while preserving preview history and effect targets. Keep ordinary Enter owned by focused non-searchable combo controls.
Co-authored-by: Codex <noreply@openai.com>
assets.export of abutting fills must leave no ghost edge (#983 / #1037); panel thumbnails use the same Art Optimized supersample. Progress docs mark the gap closed.
Keep surviving drawable runs separate when Delete or Backspace removes an open-path anchor. Preserve appearance, selection and one-step Undo.
Co-authored-by: Codex <noreply@openai.com>
The Curvature tool built its curve as a uniform Catmull-Rom: both handles of a
smooth point a sixth of the chord between its neighbours, the ends of an open
path without handles. Uneven spacing overshot or looped, a J or U from three
points bent sharply at the middle with straight legs, and the end segments
looked flat.
- `curvature_spline` (draw2.rs) makes each stretch of three points follow the
circle through them: a smooth point's tangent is that circle's
(`smooth_handles`), each handle `chord / (3 cos²(α/2))` long, α between
handle and chord capped at 90° (`arc_handle`). The ends of an open path
mirror their neighbour's tangent in their chord (`end_handle`). A turn
tighter than 30° (`TIGHT_TURN`) shortens its handles, so a narrow V comes to
a point. Degenerate points become corners. `path.curvature` and the rubber
band use it.
- `catmull_rom` is unchanged for the Pencil and Paintbrush fitting.
- `bend_last` (from: smooth), `curvature_move` on a smooth point, the point
`curvature_insert` adds on a straight segment, and `path.convertAnchor` to
smooth without x/y (`curvature_smooth`) use the same rule.
- `curvature_extend` gives the new end its end handle unless Alt-clicked
(`corner` param on `path.curvatureEdit`).
- Neighbours of a point dragged on an existing path keep their tangents (a
Pen-drawn shape isn't reshaped); the path being drawn re-curves throughout.
The 'Last updated · Change' status lines in docs/roadmap.md, docs/target-app-parity.md and docs/image-trace-quality.md change with almost every merge to main, so this PR's edits to them conflicted each time main moved. They are reverted to main's text; this PR's evidence bullets, history rows and table entries stay.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018tBcdwNhptqtmX32JCGFzB
The 'Last updated · Change' status lines in docs/roadmap.md, docs/target-app-parity.md and docs/image-trace-quality.md change with almost every merge to main, so this PR's edits to them conflicted each time main moved. They are reverted to main's text; this PR's evidence bullets, history rows and table entries stay.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018tBcdwNhptqtmX32JCGFzB
The Legacy .ai Options dialog gains Hidden Objects (Hidden Layer, Omit, Make Visible) and Text
(Editable, Outlines), translated in every catalog. Docs: type and hidden objects in the legacy
.ai paragraphs, the restored revision rows and roadmap row.
Use automatic vector smooth shading without a separate control.
Enable Cap by default and keep continuous rim curves and bounded seam joins.
Integrate the shared dialog with the other three 3D effects.
Preserve the writer and reader changes while integrating the current main.
The combined candidate passes all eight local CI gates and the 2,048-case
reader panic verification. Hosted checks remain required before landing.
Refs #1893, #1894.
A shortcut set another app saved as slash-name text (a .kys file whose
text starts with a slash name and "{", such as "/Menus {") opens in
Import Shortcut Set from File › Open, from Edit › Keyboard Shortcuts ›
Import… in the desktop app, or from a drop on the window, whether or
not a document is open. The dialog proposes a target for an entry when
an earlier import kept one for that name, or else when one tool,
command or panel matches the name clearly by its id or by one of its
labels. It decodes the file's key and modifier codes from the codes
earlier imports kept, from the example in the AiCommandPalette README
(/Key 48 for the 0 key, with /Modifiers 0 taken as no modifiers), and
from VectorCraft's default shortcuts where at least two entries vote and
four votes in five agree. The user picks the remaining targets, presses
the key for each unknown key code or marks it No equivalent, and chooses
the modifiers for each unknown modifier code. Apply assigns the ready
rows with the Keyboard Shortcuts rules: a tool takes a single key,
optionally with Shift. It goes through the rows from the last one back
and leaves a row out when a later row it applies has the same shortcut
or the same tool, command or panel. Keyboard Shortcuts then shows the
result as unsaved changes until the user clicks OK. Copy Report copies
the set's name, the rows Apply leaves out and the parts of the file that
weren't read.
- shortcutSet.read is a query command: it reads a set and does not
modify the document or the preferences. It returns each entry with
its section, codes and line, and up to 1,000 skipped tokens, each cut
to 80 characters. It reads at most 4 MiB of text and 20,000 entries,
skips blocks nested more than 16 deep and cuts names at 1,024 bytes.
With a path it reads at most 4 MiB and 4 bytes of the file, and with
--automation-read-root (#832) the path must lie inside the read root.
A file whose text starts with "<", such as an XML shortcut file saved
as UTF-8, fails with "This shortcut file is in a form VectorCraft
can't read."
- importMatches.list, importMatches.set and importMatches.reset read
and change the matches kept with the preferences; resetting the
preferences keeps them. With Remember My Choices on (the default),
Apply keeps the targets and codes the user chose, and for the rows it
assigns, it also keeps the matched targets and the codes decoded by
agreement. A later import proposes them.
- The name matcher compares a name with ids by exact match and shared
words. It compares the name with labels, in English and in the
interface language, by exact match, shared words and character
pairs. It proposes a match only when one tool, command or panel
scores at least 0.6 and at least 0.1 more than the next one.
- When Import Shortcut Set is opened from Keyboard Shortcuts, Cancel,
Escape and ui.dialog.cancel close it and return to Keyboard Shortcuts
as it was (dialogs::PARENT). A document's queued Missing Fonts dialog
(#792) opens after Keyboard Shortcuts closes.
- File › Open has a "Shortcut sets" filter, and in the desktop app
Keyboard Shortcuts' Import… shows .json and .kys files.
Docs: docs/mcp.md, docs/control-protocol.md, docs/development.md,
docs/target-app-parity.md, docs/roadmap.md.
The Corner Radius field in the Properties and Transform panels has a
link toggle behind it (the "singleCornerRadius" preference, on by
default). When the link is on, one field sets every corner, as before.
When it is off, the panels show one field for each corner of a live
rectangle: Top Left, Top Right, Bottom Right and Bottom Left. Each field
sets its own corner through object.setLiveShape {corners, radius}.
This is the part of #1594 that does not change the corner widget drag
or its modifier keys, split out for review.
Tests: a Properties panel test (the link on shows one field; off shows
the four labelled fields with each corner's radius, in line and in
order). The new labels are translated in all 15 catalogs.
Fix#1726 with idle, absolute line and reply-write deadlines and connection-slot guards. Add real-loopback regressions and document reconnect behavior.
Validated with cargo xtask ci: all seven gates passed; 6156 tests passed, zero failed, seven existing ignored.
The three 3D types besides Revolve, as live effects in the three-d crate,
drawn as shaded vector faces by the canvas, SVG/PDF export and Expand
Appearance alike, from the public 3D and Materials documentation:
- Extrude & Bevel: depth (0-2000 pt), twist, taper, solid or hollow caps,
and bevels in six original cross-sections (classic, rounded, cove, step,
ogee) with width, height, repeat, spacing, inside and both sides.
- Inflate: the shape as a membrane under pressure (a Poisson solve held at
zero along the outline and holes), so it rises vertically from the edge
and rounds without creases; volume, depth and both sides. Steep cells
near the outline are refined without cracks.
- Rotate: every fill and stroke turned in 3D and shaded as one plane.
All three share Revolve's view and lighting parameters, the rotation and
light gizmos (turning about the art's centre) and a dialog with Object,
Rotation and Lighting tabs, with Position presets (Front ... Isometric
Bottom, our own values). An object takes one 3D effect. Inflate cuts the
grid cells that straddle a hole's edge with pathops, hence the new
pathops -> three-d layer order.
Docs: docs/three-d.md, mcp.md, and the 3D rows of the parity docs.
bflatastic