Each action set now has an id of its own, assigned when the set is made
(Default Actions, New Set, Begin Recording on an empty panel) and when it
is loaded from the saved preferences. The id is not saved.
The question Delete Selection asks about sets holds their ids, and
ui.actionSet.delete takes ids in place of all: OK deletes the asked sets
wherever they are now, and deletes nothing when one of them no longer
exists. Before, the question matched sets by the list of names, so with
two sets of the same name, or a new set made under the asked one's name
while the question was open, OK could delete a set it did not ask about.
The Delete Selection question now carries the names of all sets as they
were when it asked (`all`). `ui.actionSet.delete` deletes nothing unless
the panel's sets still have exactly those names in that order, so a set
with a repeated name that moves into the asked index is not deleted.
Shift-click on a set's name selects the sets from the current one to it
also while an action in the current set is selected.
The question Delete Selection asks now passes the names of the sets it
names along with their indexes. ui.actionSet.delete deletes nothing and
returns an error when the set at an index no longer has that name, so a
set deleted or added above them while the question is open does not
make OK delete a different set. An index above the platform's usize
range is refused as "no such action set" instead of wrapping on 32-bit
builds.
Delete Selection in the Actions panel (the bottom bar's trash and the
panel menu's new Delete) now deletes the selected action set with its
actions and keeps the other sets, after asking. A selected action is
still deleted at once. Shift-click on a set's name selects the sets from
the current one to it, and one question deletes them together. Default
Actions and the last set can be deleted; New Set still works on the
empty panel.
ui.actionSet.delete {sets?: [index]} does the deletion: an index past
the last set is an error before anything is deleted, a recording into a
deleted set stops, and a recording into a later set stays in its set.
Undo does not restore a deleted set.
Double-clicking the Objects on Path tool opens Objects on Path Tool
Options: a nine-point Pivot grid, a Rotate field, Reset (the center and
0) and Save. Save sets the tool's options, which last across tool
switches and are saved with the preferences. The tool sends them with
each attach, and object.objectsOnPath.attach without pivot or rotate
uses them, so they apply to the objects attached next; groups attached
before keep theirs.
addon.pathtools.divideDashes cuts the selected paths (or only their
direct-selected segments) into separate open paths of a dash length
measured along the curve, with an optional gap (gap pieces dropped
unless removeGaps is false) and Fit to Corners and Ends; pieces keep
the path's appearance, one undo step, at most 100000 pieces. Geometry
in vectorcraft-pathops; dialog with unit fields and Preview; tests,
sweep cases, catalog rows and docs.
addon.arrange.groupOverlapping groups the selected top-level objects
whose visual bounds overlap or touch, chains included (union-find over a
sweep along x, at most 20000 objects), only within one layer or group.
Each group takes its frontmost member's stacking place; one undo step,
all groups made in one pass over the tree. Menu item, tests, sweep case,
catalog rows and docs.
Character panel > Language sets the selected characters' language;
text.setFormat and text.setRangeStyle take `language` by name or tag
(unknown: an error), and character styles carry it. Document Setup's
language list gains Hindi, Marathi, Gujarati, Bengali, Punjabi, Tamil,
Telugu, Kannada, Malayalam, Odia and Urdu, with catalog rows; the
Digits menu's numeral names move to a digits context, as Hindi is now
also a language name.
A save in the native, template or .ai formats with separateArtboards writes an
artboard file even when the document has one artboard, so an existing file with
that name now gives the data set the next free suffix too.
When a step can write one file per artboard (Save in the native, template or
.ai formats, or Export in SVG, EPS, the raster formats, DXF, EMF, WMF or .ai)
and the document has more than one artboard, an existing file with one of the
stem's artboard file names now gives the data set the next free -2, -3 suffix,
as the stem's own file does. Names a data set's outputs will take are also
reserved for the later data sets of the same batch.
The naming choice reaches batch_datasets as a field of the run, and the short
Batch entry in docs/mcp.md is back to main's text; the longer Batch section
names datasetFileNaming and when an existing output gets a suffix.
The `-2`, `-3` suffix for a data set output that already exists is now
looked up only when the destination folder and the output path pass the
read and write access checks, so a call cannot learn which files exist in
a folder it may not use.
The lookup uses only extensions of formats the app knows, without path
separators or `..`, and only paths whose parent is the destination folder.
A step whose `format` is unknown keeps its own path instead of being
pointed into the destination folder. A data set or document named `.` or
`..` gets the `Untitled` stem with its three-digit number.
The Batch dialog has a File Name choice for a Data Sets source, starting
with File + Number (`source001`), as well as File + Data Set Name
(`source_Alpha`) and Data Set Name (`Alpha`). `action.batch` takes it as
`datasetFileNaming`; a call without it keeps File + Data Set Name, and a
folder source ignores it. An unknown value is an error.
A data set output whose name already exists in the destination folder
now takes the next free `-2`, `-3` suffix instead of replacing the file,
and a Windows device name under Data Set Name gets a trailing `-`.
File › Open and File › Place read JP2 files and raw JPEG 2000
codestreams (.jpf, .jpx, .jp2, .j2k, .j2c, .jpc) through hayro-jpeg2000,
and store the pixels as PNG. Gray, RGB, CMYK and ICC-tagged images, with
or without alpha, are converted to RGBA. Several codestreams, JPX
composition or layers, other color spaces, inconsistent or oversize
palettes, inconsistent channel definitions, oversize tile grids and
images past the pixel allowance are refused with a message before the
pixels are decoded.
The capture and display resolution boxes size the image: the box that
comes last sets each axis, and an axis without a usable value uses
72 ppi.
IccProfile::to_srgb_into converts a pixel with the cached transform and
no heap allocation.
A menu under each of the five tiles in Pattern Brush Options lists None,
Original and the document's pattern swatches; the corner menus keep the
four automatic corners. A swatch choice copies the swatch's whole art and
its tile frame into the brush, so the brush keeps drawing after the swatch
is deleted, and the menu then shows that art as Original. Side cannot be
None: OK shows "You must choose a side pattern." and keeps the dialog open.
brush.options takes side_tile, outer_corner_tile, inner_corner_tile,
start_tile and end_tile (a pattern name, none, original, the corner auto
ids, or {"pattern": name} for a swatch named like one of those words), and
rejects side_tile "none" and unknown names before editing.
The question for brushes no stroke uses reads "Delete the brush selection?" with Yes and No, from the bottom button and the panel menu, and Alt-click (Option-click on macOS) on the button still deletes them without asking. When a stroke uses one of the brushes, the button, Alt-click and the menu item ask with Remove Strokes and Cancel; Remove Strokes deletes the brushes and the strokes that used them become plain strokes.
brush.unused also counts the tile that pattern editing's Cancel puts back, which brush.delete already clears, so the panel asks the in-use question for a brush only that tile uses.
SVG export ignored an image's colorize paint and wrote the image's own
black, white and gray pixels. EPS export flattened every colorized image
into a process-color raster, so a spot color lost its plate. Both now
write the image in the fill color, with the coverage the canvas and PDF
export use (darkness times alpha), so white and transparent pixels take
no color.
- SVG writes a coverage PNG as a mask over a rectangle in the color,
shared between repeated images while each keeps its own color. Linked
mode writes the coverage PNG as a file, and SVG Tiny 1.2 writes a PNG
in the color. A colorized image whose pixels are missing, or whose
grayscale pixels can't be decoded, is left out with a warning.
- EPS writes fully covered or uncovered pixels as an imagemask in the
color's process or Separation ink (Registration on every plate), and a
grayscale image as ink samples scaled by coverage. Level 3 masks its
uncovered pixels out and Level 2 writes them white; gray midtones are
written over white, with the existing warnings.
- EPS flattening no longer counts a solid colorize paint on a grayscale
or 1-bit image as transparency by itself. Opacity, blending modes,
opacity masks, effects and overlapping transparent art still flatten
it, and so does a colorize paint the writer can't draw.
The svg crate's tests turn on resvg's raster-images feature to render
the embedded PNGs.
Docs: docs/mcp.md, docs/target-app-parity.md.
A built-in add-on in Object › Plug-ins › Arrange Tools (#4830, #4831, #4832, #4833, #4834):
- addon.arrange.grid lays the top-level selected objects out in rows and
columns, a row or a column (stacking order from the back, visual bounds,
each object centred in its cell), from the selection's top-left or
centred on the artboard.
- addon.arrange.swap swaps two objects' bounds centres, and with `size`
their widths and heights.
- addon.arrange.replace puts a copy of the topmost selected object centred
on each of the others, in its stacking place, kept, stretched or fitted
in proportion; the replaced objects are deleted unless `keep`.
- addon.arrange.size gives each selected object an exact width and/or
height about a reference point.
- addon.arrange.zoomSelection (a UI command) fits the active view to the
selection.
Places and sizes are measured as object.setBounds measures them (its
transform, now also available per object), strokes scale as Scale Strokes
& Effects says, each command is one undo step, and Arrange in Grid,
Replace with Top Object and Set Size of Each open previewed dialogs.
Catalog rows, command sweep cases, docs/mcp.md, parity docs and the
ROADMAP progress log.
With write root ...\out, a save to ...\out\x.svg:evil was accepted: it stays inside the root, but writes a hidden stream no folder listing shows. A ':' in any name after the drive is now refused with the device names. The check is a plain name test, so it is covered on every platform; the check-then-open race (item 1 of the report) is a documented limitation and is not touched.
perspective.move takes constrain: true instead of a plane-space
direction. For each object, the command snaps the move to the nearest
axis or 45-degree diagonal of that object's own plane, so a selection on
several planes keeps every object on a line of its plane. The tool sends
the raw pointer with the flag.
On a diagonal, Snap to Grid now moves along the diagonal by the nearer
per-axis correction, so that edge lands on its gridline.
perspective.move takes an optional constrain: [dx, dy], a plane-space
direction. For an in-plane move, Snap to Grid's correction is projected
onto that direction, so a move the Shift key constrains to a plane axis
or a 45-degree diagonal stays on that line when an object edge lies near
a gridline. The Perspective Selection tool sends the direction for
Shift moves and copies. Moves without the param behave as before.
Blob Brush Tool Options gain Angle (-180 to 180 degrees, 0 by default)
and Roundness (0 to 100 percent, 100 by default), with a preview of the
tip and three dabs; a drag in the preview square sets the Angle. The
elliptical tip keeps its angle on the page along a stroke, a 0 percent
tip is drawn 0.1 percent as wide as it is long, and Size set to
Pressure still varies its size. path.blob takes angle and roundness,
and both values are kept with the tool's options.
While a non-round tip drags, the Blob Brush shows the outline of the
area it covers with its length label, and an Alt drag that smooths
shows the Smooth tool's thin line.
Alter Paths for Appearance wrote every stroke as its filled outline, so a
1 pt circle became two circles and a hatch, and an open arc became a
closed outline and a hatch: two cut lines where a CAM program expects
one. The option now outlines only the strokes a line can't draw: the ones
Preserve Appearance outlines, strokes wider than the widest lineweight
(2.11 mm, to the hundredth), and every stroke in R13 and R14, which have
no lineweights. Other strokes stay CIRCLE, ARC, SPLINE and LWPOLYLINE
entities with their lineweights; R12 keeps them as POLYLINEs with their
width.
A dashed stroke whose offset starts part way into its pattern is now
outlined with Preserve Appearance and with Alter Paths: a linetype always
starts at the start of its pattern, so the dashes were written in the
wrong place.
An open path with a single straight segment was written as a two-vertex
LWPOLYLINE (POLYLINE before R14). It is now a LINE entity from its start
to its end point. A stroke with a weight in R12, R13 and R14 keeps its
polyline, since a LINE has no width. Closed paths and paths with more
than one segment are unchanged.
Part of #1299.
Path Precision Tools gains the Shared Edge Merge Tool, kept out of the
toolbars (All Tools drawer and Object › Plug-ins › Path Precision Tools,
no shortcut), and Keep Shared Points Together:
- Shared Edge Merge Tool (sharedEdge): over two paths touching at two
coincident anchors (tolerance 0 to 3 pt) hovering shows the two
stretches and the merged edge; a click replaces both with it, half way
between them, or following the upper (Shift) or lower (Alt) path. Both
paths stay closed or open, anchors either stretch has inside are
matched on the other, one undo step.
- Making ends: near anchors meet on a click and an anchor one path lacks
is added to match; Shift+Alt asks for this inside a stretch.
- Keep Shared Points Together: an option that makes Slide Anchor Along
Path, Extend Path and Set Anchor take coincident anchors along. Nothing
else in the app changes.
- Shared Edges section in the Anchor Inspector: brush diameter,
coincidence and the option.
- Commands addon.pathtools.mergeEdge and movePointsTogether, params
validated and covered by the command sweep.
- Cursor stand-in, catalog rows in every language, docs and tests.
With the Live Paint Bucket, Alt-click on vector art samples its fill,
stroke and stroke weight into the paint defaults, and on a placed image
it samples the pixel as a solid fill with no stroke. Alt+Shift-click
samples only the color under the pointer, including an intermediate
gradient color or image pixels, into the active fill or stroke. Neither
click paints or changes the selection or selected art, and the next
Bucket click paints with the sampled paint. While Alt is held, the
Bucket shows the Eyedropper cursor and no face or edge highlight.
appearance.copyFrom takes `defaultsOnly: true` to update only the paint
defaults, and paint.sampleColor takes `clearStroke: true` to clear the
stroke default after an image sample into the fill.
Path Precision Tools gains two tools, kept out of the toolbars (All Tools
drawer and Object › Plug-ins › Path Precision Tools, no shortcuts):
- Corner Tool (cornerTool): editable corners on any path through the
existing Live Corners. Hover shows an eligible anchor, a click cuts a
corner with the tool's radius and kind, a drag sizes it (Shift: whole
values), a corner's marker selects it and loads its values, resizes it
and removes it at 0 or on a double-click; a corner never grows past
what fits; an Alt-marquee cuts every eligible anchor inside.
- Corners section in the Anchor Inspector: radius, kind, selected count,
Apply to Selected Anchors.
- Slide Anchor Along Path (slideAnchor): a drag runs an anchor along its
curve, the neighbouring segments refitted by the keep-shape kernel;
Shift snaps where the tangent is a multiple of 45° from the constrain
angle.
- Commands addon.pathtools.cornerSet, cornerRemove and slideAnchor, one
undo step each, params validated and covered by the command sweep.
- Cursor stand-ins, catalog rows in every language, docs and tests.
Holding backquote while dragging with the Selection tool (move, bounding-box
scale or rotate) or the Rotate, Reflect, Scale or Shear tool applies the drag
to the selected objects' pattern fills and strokes and leaves their geometry
in place. The key state at release decides the result: the key may be pressed
after the mouse button goes down, and releasing it before the button comes up
commits an ordinary transform. Objects without pattern paint do not move.
PointerEvent gains a `backquote` flag (false when absent). The desktop canvas
reads it from the held key on every pointer event, and `ui.pointer` and the
`pointer_gesture` tool accept it per event or as a default for the gesture.
object.lock.unselected is now reached by its key and as a command only:
the Object > Lock > Unselected Artwork menu item is removed, and the
command stays in the registry, the shortcut editor and automation.
In a partly selected clip group or compound path it now locks the
unselected members, the clipping path included, and leaves the container
and the selected members unlocked. It locks unselected guides while Lock
Guides is on. Hidden art and art on a locked layer stay unlocked, and a
selected layer's art counts as selected.
With a selection in isolation mode the command is enabled and locks only
the unselected art inside the isolated group. The other Lock and Hide
items keep their isolation behavior.
Lock and Hide still share one selector. A lock flag on it selects the
clip group, compound path and guide cases above; Hide > Unselected
Artwork keeps its behavior, and a test covers both directions.
Docs: docs/mcp.md, docs/target-app-parity.md.
The reference app locks all deselected artwork on Cmd/Ctrl+Alt+Shift+2.
VectorCraft had no command for it: Object > Lock held Selection, All
Artwork Above and Other Layers.
The new command, object.lock.unselected (Object > Lock > Unselected
Artwork), locks in one undo step the objects that Hide > Unselected
Artwork hides: every object that Select All takes and that is neither
selected nor holds a selected object. It returns the count. Hidden
objects stay unlocked. The selection stays as it is, Unlock All unlocks
the objects again and selects them, and with nothing to lock the
command records no undo step. Both commands now share one function,
which locks or hides the objects that the existing unselected helper
returns.
In isolation mode the menu item is disabled, and the command returns
the error "not available in isolation mode" that Hide > Unselected
Artwork returns there, and changes nothing.
Docs: docs/mcp.md, docs/target-app-parity.md.
In vertical type, Alt+Down/Up (with or without Shift) steps kerning at a
caret or tracking of selected text, Alt+Left/Right steps leading, and
Alt+Shift+Right/Left steps baseline shift; Cmd/Ctrl makes five steps.
Horizontal type keeps its mapping. Selected type objects follow the same
rule when all of them are vertical, and a selection that mixes horizontal
and vertical type takes the horizontal mapping in one undo step.
Object › Plug-ins › Artwork Cleanup and a hideable Text row in its panel
gain text tools, each one undo step:
- Break Text into Lines / Paragraphs / Words / Glyphs: point type pieces
placed by the glyph of their first character, keeping their styles.
- Combine Point Text: one-line point type merged into as few objects as
it can, every glyph staying where it was (tracking and spaces, checked
against the layout).
- Split Text at Cursor, Remove Line Breaks, Remove Paragraph Breaks,
Set Alignment, Keep Position, Reset Text Transform and Replace
Missing Fonts.
Effect › Color Effects › Duotone… (addon.color.duotone, also in Object ›
Plug-ins › Color Effects) prints the grey-equivalent tone of each colour
with one to four inks, each with its own tone curve. It is a colour
adjustment like the add-on's others, so it stacks with them and works as
a filter through addon.color.filter.
- One tone of a swatch the document has gives a tint of that swatch,
linked, so a spot tone separates onto its plate; several tones give
the CMYK mix of their tints (the inks overprint, so they multiply).
- Colour adjustments now map paints with their swatch links
(ColorMap::apply_link); the existing adjustments behave as before.
- Skip Objects with Spot Colors leaves spot-linked colours as they are.
- The dialog has a row per tone and the picked tone's curve (the Curves
graph, reused), its points and Reset to Linear / Inverse.
Print Ink Fixes (addon.color.printFixes, Object › Plug-ins › Color
Effects › Print Ink Fixes…) scales CMYK colours over a total ink limit
down to it, removes white overprint and sets black overprint (Overprint
Black's logic) in a CMYK document, as one undo step, and reports what
changed. RGB documents are refused.
The panel opens both under Inks.
Deferred: an opaque undercoat, tones for type only, extra gradient stops
for smoother tints, curve flip and all-100 % buttons.
A successful command.batch now records its last Unite, Intersect or other
Pathfinder step as the operation Repeat Pathfinder runs, so playing an
action from the Actions panel updates it. A batch that fails and rolls back
leaves the previous operation in place. action.batch, which runs an action
over other files or data sets, does not set it.
dotCooCoo