A built-in add-on under Object › Plug-ins › Path Precision Tools:
- Anchor Eraser Brush: painting over selected paths removes the anchors
under the brush that the outline can do without within a tolerance,
refitting the handles beside them (Alt ignores the tolerance, Cmd/Ctrl
deletes without refitting, pen pressure can scale the brush); one undo
step per stroke.
- Extend Path tool: dragging an end of an open path carries it on
straight, by stretching its last curve or along the circle it curves
on, or shortens it back along itself.
- Measure & Inspect tool: drag to measure distance and angle; hover a
path to read segment and path length, area, curvature, tangent and
anchor angles and handles, in the document's units.
- Anchor Inspector panel: the selected anchor's position and handles as
numbers, with Make Smooth (auto-smooth rule), Make Corner, Equalize
Handles, Remove Points Keep Shape, Add Points and three ways to close.
- Add Points at Crossings and Split at Crossings.
The tools stay out of both toolbars as shipped; the All Tools drawer
lists them under the add-on's heading. Commands are addon.pathtools.*;
the existing commands, tools and menus are unchanged.
A built-in add-on in Effect › Color Effects and Object › Plug-ins › Color Effects:
- Exposure (stops of linear light, offset and gamma), Desaturate and
Invert Colors as live colour adjustments, evaluated in stack order with
those of Effect › Color Adjustments.
- addon.color.filter applies any colour adjustment to the colours
themselves, through the Edit Colors pass, as one undo step.
- A panel picks an adjustment and its values, then adds it as a live
effect or applies it as a filter.
The add-on lives in its own modules (effects, engine and ui-egui addons
folders) and leaves the existing effects, commands and menus as they
were.
A built-in add-on under Object › Plug-ins › Artwork Cleanup:
- Simplify Anchors (Keep Shape) removes anchors while the outline stays
within a tolerance, optionally keeping sharp corners.
- Document Health Check finds and fixes 16 kinds of problems in the
selection or the document (stray points, duplicate and collinear
anchors, tiny handles, nearly closed paths, needless groups, compound
paths and clipping groups, unpainted and invisible objects, duplicate
objects, art off every artboard, empty artboards…), with Show, Fix
Selected and Fix All, each fix one undo step.
- Deep Ungroup and Rejoin Path Pieces.
The add-on lives in its own modules (pathops, engine and ui-egui
addons folders) and leaves the existing commands, tools and menus as
they were.
UPDATE_APP (native builds; craft-update is a native-only dependency) carries our 128 px icon and accent (#e8573f, its colour in ArtCraft Launcher). The updater, the self-update
helper and craft-update's startup prompt all get them through crate::UPDATE_APP; the
prompt draws the icon, the accent and "by ArtCraft" (craft-update's default developer).
craft-update is pinned to storytold/craft-libs main at 1065653e7 (#434).
Clippy fixes for Rust 1.99 in untouched code (same logic):
- crates/svg/src/import/fx.rs
- crates/tools/src/text/tool.rs
A placed (linked) file is put where its matrix takes the canvas point of
art space's origin (the centre of %AI3_TemplateBox). In many files the
matrix takes the corner of the box the file is written with instead, so
the image landed far off its artboard, the layers differed from the
page, and the file came in as its PDF part.
The reader keeps that second placement for each placed file where the
two differ. When the layers don't draw as the page, they are compared
again with those files at their box's corner, and used if that draws
as the page. Files whose layers already match keep their placement.
AGENTS.md (and CLAUDE.md where present) gets a CI workflows section: workflows only call
craft-common-actions at @main, with no other jobs; feature and fix PRs don't touch CI and
link or open a craft-common-actions issue (a PR only for a small fix that is safe for
every app and does not increase CI time); legacy jobs
aren't added to and move only as their own task, staying until a shared workflow runs them.
windows-arm64.yml moves from its SHA pin to @main. The pinned revision is on
craft-common-actions main and the workflow (and the actions it calls) is identical
there, so nothing changes in behaviour.
A placed (linked) file written as an object's editable copy, on %_
lines after its drawn look, has its %AI5_BeginPlace and %AI5_EndPlace
markers on those lines too. The lexer dropped comments after %_ that
don't start a section, so the placed file never began, the ~ that ends
it was an operator the reader didn't know, and the whole file came in
as its PDF part. The lexer now returns those two markers from %_ lines,
and the preview reader skips the %_ its header line starts with.
The Help > Check for Updates… item, the update window and the Image Trace
progress labels had no ja row and drew English. Wording follows the
PhotoCraft ja catalog for the update strings.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01K5NRZNWfaSLBWVzV8hivyS
PDF export (and the PDF-compatible .ai it writes) cut each gradient mesh
patch into 8 x 8 flat-coloured quads. Viewers showed colour bands and
hairline seams between them, and files with many meshes became very
large and slow to write.
An opaque mesh is now written as one Type 6 (Coons patch) shading
(ISO 32000-1, 8.7.4.5.7) filling its outline, through the PDF writer's
MeshGradient: each patch blends its corner colours bilinearly, as the
canvas draws it. Colours go through page_color as other fills do, and a
mesh mixing RGB with other models goes through RGB. A mesh with
see-through points, an invalid one, or one past the coordinate range
keeps the quads.
A PDF-compatible .ai whose PDF part's pages are cropped to its art (each
page the box of all the art, the editing data's bounding box) rather
than to its artboards came in as that PDF part: the editing data's
artboard wasn't the page's size, so its layers were refused. With
several artboards every page held all the art, so the document had a
copy of everything per page.
When the artboard isn't the page's size but the editing data's bounding
box is, the layers are compared with the page on that box and keep
their artboards. The comparison of their art with the page still
decides whether they are used.
With Preferences > Performance > Real-time Drawing and Editing off, tool
previews are deferred to the release, so a guide dragged out of a ruler
(guide.add) or moved with a selection tool (guide.move) showed only its
position label until the button was released. Guide previews now always
apply as the guide is dragged: the guide is all such a drag shows.
#4646's units and guides lost on reopen don't reproduce for a native
file: a new millimetre document's ruler guides and units survive Save,
Close and Open in .vectorcraft, PDF, .ai and EPS (new regression test,
and live in the app with Background Save). An SVG saved without Preserve
Editing reopens in pixels with no guides, as the reporter saw.
A pattern fill was written to EMF as every tile's art, each tile in a clip
of its own, with the brush made again for each part: a rotated two-colour
stripe fill of a 360 x 260 pt rectangle took 473 fills, 246 clips and
122 KB.
When the tiles can't overlap (a grid or brick tiling whose art stays in its
tile), each tile's clip is left out where what it clips lies inside it
already (a convex clip holding every control point of the fills), and the
n-th fill of every tile becomes one path. The picture is the same: the
tiles don't overlap, and the fill's own clip still trims them. That fill
is now 2 fills and 1 clip, 61 KB; unrotated, 99 KB becomes 33 KB.
Tiles that overlap, hex tilings, and tiles holding strokes, images or
clips that cut are written as before, their parts off the page left out.
Found while testing crates/doc/src/blend.rs:197-201 (lerp_dash, solid_like)
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
bflatastic