A paragraph that ends in a soft return ends with the empty line after it,
so the line the soft return ends is justified like any other; it was taken
for the paragraph's last line and left aligned.
Key 30 of a paragraph's attributes holds its tab stops: each its position
(key 0) and alignment (key 1: 0 left, 1 center, 2 right, 3 decimal).
They were not read, so tabs fell on the default stops. At most 1,024 are
read a paragraph and 2^20 copied into a story's paragraphs, past which the
default stops apply with a warning. The fuzz test feeds hostile paragraph
attributes: alignments, auto leading, hyphenation options and tab stops.
In right-aligned area type, the text before a line's last tab sits at its
stops, measured from the left edge, and the text after it (none when the
tab ends the line) against the right edge. The line was laid out from the
left and aligned as a whole, which moved its start off the left edge and
its tabs' text off their stops. Illustrator's own layout in a user's .ai
sets its price lists so. Centred and justified lines are aligned as a
whole as before.
- Auto leading stays auto: each line takes the paragraph's share (key 7)
of the largest type on it. The leading was the first two lines'
distance for every line, so 10 pt lines under a 15 pt heading came in
18 pt apart.
- The paragraph's hyphenation options (keys 10 to 15) are read.
- Area type of one frame whose last lines the file sets, but which don't
fit here (the fallback font, or a descent past the frame's bottom),
gets a frame taller from its bottom (vectorcraft_text::fit_source_lines),
with a warning.
A user's .ai whose type differed from its page by 6.6%, so that it opened
from its PDF part with each line its own text object, now opens from its
layers.
In Justify Left, Center or Right, only the paragraph's last line keeps its
alignment; a line that a soft return (U+2028) ends is spread to the frame's
edges like any wrapped line. Illustrator's own layout in a user's .ai sets
such lines justified, and VectorCraft left them ragged.
request, execute, commands and screenshot move onto the shared crate (storytold/craft-libs#413): a timeout on every call, the screenshot's PNG also in data, and docInspect and uiInspect beside them. A call the page gave up on gives up its request if the app has not started it, so the app skips it. openFile, captureDownloads, files, readFile and inspect stay VectorCraft's own, on the same object.
The legacy reader skipped `TV`, `Tv`, `Ty` and `TY` of section 15.3.4 of
the version 7 file format specification, so type set with `1 TV` opened
horizontal.
- `TV` sets a text object's writing direction. VectorCraft keeps one
direction for each text object, the one in force at its first
character, with a warning when a later character has another.
- `Ty` marks a Kumi block as a Tate-chu-yoko run, which is VectorCraft's
own mapping, and `TY` does the same in horizontal type. A `TY` block in
vertical type opens unmarked. Two blocks with nothing between them open
as one block.
- `Tv` sets Standard Vertical Roman Alignment.
All four are modal, and an operand other than 0 or 1 leaves the value as
it was.
Docs: docs/file-format-parity.md.
After Select All in threaded text, the Justification dialog kept the edited
frame's selected range when that frame was no longer threaded at OK. A thread
broken after the frame moves the rest of the story into it, so the paragraphs
past the old range kept their values. The dialog now drops the range and
changes every paragraph in that frame.
With mixed indents, the Tabs panel sends one text.setFormat per paragraph,
addressed by frame and byte offset. Threaded text reflows after each step,
so an indent that made earlier paragraphs wrap onto more lines moved text
into the next frame, and the later steps landed on the wrong paragraphs or
on none. The steps now run from the story's last paragraph to its first, so
each step's offset comes before every change already made.
After Select All in threaded text, the Tabs panel's indent markers read
the indents of the edited frame alone. When another frame's paragraphs
had a different left indent, a marker drag changed them by the edited
frame's values, or left them alone. The markers now take every
paragraph of every frame in the story, so each paragraph keeps its own
left indent or first-line position.
The Justification dialog kept the frames of the story from the moment
it opened. OK now acts on the frames in the edited frame's thread when
it is pressed, so a frame that left the thread while the dialog was
open is not changed, and a frame that joined it is.
After Select All in threaded text, the panels read the frames from the
list saved at Select All. A frame that had left the thread still took
Paragraph, Tabs, Justification and Text Styles changes, a frame added
later did not, and when the first saved frame had left, Character,
OpenType and font changes went to that frame alone.
text_story now reads the frames of the edited frame's thread from the
document. Locked and hidden frames stay in the story.
An object read as its drawn look counted in the import's "came in as
their drawn look" note when it was on the page or in a kept symbol, but
not when it was in a pattern's art or a brush's art. A file whose only
such objects were in a pattern or a brush opened without the note.
- A kept pattern's drawn looks count, once for each pattern name: a
definition that a later one of the same name replaces no longer counts.
- A brush's art counts once a brush that is kept uses it; art no kept
brush uses adds nothing.
Q restores the painting state but not the transparency (Xy): the writer
sets Xy only when the next object's state differs from the last one it
wrote. Restored at Q, type after a clipping group following a Screen glow
drew in Screen and nearly vanished on a light background.
A blend whose spine was never edited has only its keys in the editing
data, no spine part. Its spine is the straight lines between the keys'
centres in the record's order; read as such, the blend comes in live
instead of as its drawn steps.
Illustrator 24 writes its symbol definitions ahead of %AI9_BeginArtStyles,
so a styled object inside a symbol found no style and came in as its drawn
look. The pre-pass that finds swatch names now also keeps the first
top-level art styles section, which the reader parses before the art.
set_refuses_a_recovery_or_plugins_folder_it_cannot_use takes write or
list permission away from two folders. A guard now gives each folder mode
0o755 when it is dropped, also when an assertion panics, so the test
folder is removed afterwards.
prefs.set did not check the folder given as recoveryFolder or pluginsFolder,
beyond the automation roots check, so a control or MCP caller could save a
folder that does not exist, a file, or a folder the app cannot use. Only the
Preferences dialog checked the folder itself.
The dialog's folder checks move to the engine, and prefs.set runs them after the
automation roots check. A folder that fails returns the same error the dialog
shows, and no preference changes. An empty value, an omitted value and a folder
the preference already holds are not checked. The Wasm build skips the check, as
the dialog did. The dialog's OK now gets the check from prefs.set, and Choose…
calls the moved check directly.
Enter and Escape counted their key repeats as presses. Holding Enter with
a selection and a selection tool opened the Move dialog, confirmed it,
and opened it again at the key's repeat rate. After a drag, which gives
Move an offset, each round moved the object again.
The app now records what Enter or Escape went down on: the open dialog,
the command search, Edit Toolbar's drawer or Presentation Mode. When that
changes, the key's presses are removed from the input until it is let go.
The tool keys, the dialog's OK and the dialog's Escape also ignore
repeats, so holding Escape with the place cursor loaded discards one file.
A new press still acts, and Enter held in the Type tool still repeats line
breaks.
This also fixes these related faults:
- Ctrl+Enter or Cmd+Enter opened Move and confirmed it in the same frame.
- Holding the Enter that confirmed a dialog typed line breaks into the
text being edited.
- A command bound to Enter reopened its dialog after the dialog's OK.
- Holding Enter on a value a field rejected confirmed the dialog.
- A command search that opened while Enter was down ran its first result.
- Holding Escape over a dialog's Tips closed the dialog as well.
- Holding Escape over a dialog went on to close Edit Toolbar's drawer,
leave isolation mode or run a command bound to Escape.
The check tested one box per source segment for every candidate hole or
island. It now searches a tree of the segments' bounding boxes, built once
when the first contour is checked. The answer for each contour is the same,
so the output paths do not change. MAX_OFFSET_SEGMENT_PAIRS does not change.
With the Artboard tool, the canvas context menu lists the entries of the
public Use the artboard context menu page in its order, in place of the
entries for objects and the view. Lock Artboards and Unlock Artboards are
two submenus. An entry that cannot run is left out, and Undo and Redo stay
dimmed. A right-click on an artboard that is not selected selects it alone
first, and the menu measures the art for Delete Empty Artboards and Fit to
Artwork Bounds once, at the right-click.
Cut, Copy, Duplicate Artboards, Rename, Delete Artboards, Lock Selected,
Unlock Selected, Fit to Artwork Bounds, Switch Orientation and Export act on
the artboards the tool has selected, else the active one. docs/mcp.md lists
what the other entries act on.
- artboard.rename renames in one undo step and numbers several names. The
menu's Rename opens a dialog that runs it, and the Artboards panel's name
field runs it too.
- artboard.switchOrientation swaps width and height and keeps the top-left
corner, skipping square and locked artboards.
- artboard.selectAll chooses the tool and selects every artboard.
- edit.paste takes artboardsAt, and the menu's Paste centers copied
artboards on the right-click's point.
- The menu's Cut and Copy run artboard.cut and artboard.copy. In the desktop
app those commands publish to the system clipboard, and the menu shows the
Cut and Copy shortcuts for them.
- artboard.fitToArt and the panel's name field record no undo step when
nothing changes.
artboard.duplicate, copy, cut, rename and switchOrientation take their
artboards from the tool's selection when a call names none. Each now records
them in the journal as selectedArtboards, which a replay reads and a recorded
action leaves out. The copy commands also record art. switchOrientation
records scaleArt, and it takes patterns and lockedAndHidden and records what
its artboard.setProps step resolved for them.
While the Artboard tool is in use, a command chosen from any menu or the
command palette moves the tool's selection as the Artboards panel does:
artboard.new makes the new artboard active, artboard.duplicate selects the
copies, and artboard.delete and artboard.deleteEmpty make a remaining
artboard active.
M Balazs PC