A new reader, written from the ZSoft PCX Technical Reference Manual, decodes
the run-length encoded scan lines of 1-bit images in the header palette's
first two colors (black and white when the version has no palette or the two
colors are the same), 1-bit images in two to four planes and 4-bit images
with the header's palette (the EGA colors for versions 0 and 3), 2-bit CGA
images in the colors that the header's CGA background and palette settings
pick, 8-bit images with the 256-color palette after the image data (gray
levels without one) and 24-bit images in three planes. The image is stored as PNG at the resolution of the header's HDpi and
VDpi fields.
Open and Place list PCX, and pasting a copied .pcx file and Glass's Load
Texture… read it by its header. A file of another depth or plane count, one
cut short and one whose pixels as RGBA pass the pixel allowance are refused
with a message before its pixels are decoded. The desktop packaging does not
associate .pcx files, and no export writes them.
Docs: docs/file-format-parity.md, docs/target-app-parity.md, docs/mcp.md,
docs/releasing.md.
While the center was dragged out, the rays pointed at the pointer, as a
polygon's first corner does, and Shift put them back in their original
orientation. In the reference app they turn by a step for each update
of the drag as the pointer moves up or down, and Shift stops the turn
where it is.
Each update of the center drag in which the pointer's document y grows
now adds 0.1 radian (about 5.73°) to the rays' turn, one in which it
falls takes 0.1 radian away, and one at the same y leaves the turn as
it is. Shift held keeps the turn, and turning goes on from there once
Shift is let go. Space held moves the flare without turning the rays.
General › Constrain Angle no longer sets the turn under Shift.
Docs: docs/mcp.md, docs/target-app-parity.md.
The reference app's Flare tool rotates the rays as the center is dragged
out, Shift constrains them to their original orientation, and Space
held moves the shape being drawn. VectorCraft's Flare tool drew the
rays in one fixed orientation and ignored Shift and Space.
shape.flare takes rotation (degrees, clockwise), which turns the rays
about the center and leaves the halo, the center and the rings as they
are. While the center is dragged out, the rays turn with the pointer,
as a polygon's first corner does, and a drag straight up leaves them
unturned. Shift keeps them unturned, or turned by General › Constrain
Angle as a polygon drawn with Shift is. Space held during the center
drag or the drag that places the rings' end point moves the flare at
its current size, and the drag goes on from there when Space is let
go, as with the shape tools.
Docs: docs/mcp.md, docs/target-app-parity.md.
Preview, Embed ICC Profiles, Create PDF-Compatible File and the other VectorCraft Options went back to their defaults for every document not saved yet. A native Save or Save As now records the options it used in the preferences (not the artboards it picked, nor Use Compression, which its preference decides), and file.formatOptions offers them for a document not yet saved as a native file. A document saved before keeps its own.
While an opacity mask is edited the Layers panel lists only the mask, so a new layer was added where no row showed it, and only the panel's layer count went up. Both commands are now disabled then, as isolation commands already are (outside_mask_editing).
With a layer selected, Object > Hide > Unselected Artwork hid every object
on that layer, since the selected layer was dropped from the objects to
keep. The objects of a selected layer now count as selected.
While Lock Guides is on, a group that held a guide path was hidden whole,
which hid the guide with it. Guide paths now count as selected, so the
command keeps such a group visible and hides its other members one by one.
File > Document Color Mode and document.open {colorMode} converted the
colors of the layers, symbols, pattern tiles and swatches only. Graph
designs, graphic styles, the art of opacity masks, the tile that
pattern editing's Cancel puts back and the art of brushes kept their
old color model (only a tint of a global swatch in a graphic style or
a mask followed the swatch), so a CMYK document could still apply,
place or print RGB colors from them.
These now convert with the rest, in the same undo step: their solid
colors, gradient stops, text runs and mesh points, nested masks
included. A Hue Shift brush's key color takes the converted color of
the art color it matches, a tint of a global swatch included. The
brush library is stored again only when one of its colors changed. A
tint of a global swatch in any of these places becomes the converted
swatch's color at its tint, as in the layers. The reply's changed
count covers the colors of the layers, symbols, graph designs, pattern
tiles and opacity masks; the colors of graphic styles and brushes
convert without being counted.
Docs: docs/mcp.md, docs/target-app-parity.md.
The Live Paint Selection tool acted only on the press, so a drag
selected at most the one face or edge under the pointer. The reference
app selects every face and edge a marquee touches, partly enclosed ones
included, and a Shift-drag adds them to the selection or removes them.
A drag of 3 pixels or more now draws a marquee. On release, select.set
selects the faces and edges it touches, or select.none runs when it
touches none. With Shift held at the press, select.toggle runs with
what it touches, and nothing runs when it touches none. A face that holds the whole marquee counts. Select Fills off
leaves faces out, and Select Strokes off leaves edges out.
A click now changes the selection on release instead of on the press,
so Escape between the press and the release, which also removes the
marquee, leaves the selection as it was. The tool no longer highlights
or selects the faces and edges of a Live Paint group that is locked, on
a locked layer or on a locked artboard, or that is outside the isolated
art in isolation mode.
Docs: docs/mcp.md, docs/target-app-parity.md.
Pattern Brush Options has a menu below the Outer Corner Tile and the Inner
Corner Tile. Each can be the brush's own corner art (Original), None, or one
of four tiles made from the side tile at each corner of the path:
- Auto-Centered stretches one side tile around the corner, centered on it.
- Auto-Between bends a side tile on each side into the corner, the two
meeting on the corner's diagonal.
- Auto-Sliced lays a side tile on each side past the corner and masks it
at the diagonal, so the two meet like a mitered frame.
- Auto-Overlap lays a side tile on each side past the corner, overlapping.
The tiles are straight at the corner and follow the path towards the side
tiles, so they meet a curve that runs into the corner. A side tile taller
than the corner can reach is stretched along until the two sides meet. On a
short path, a corner's tile is squeezed along so that it covers at most the
path up to an open path's end and half way to the next corner, and its two sides still meet on the
corner's diagonal.
The definition stores the choice as `outer_source` and `inner_source`
(`none`, `autoCentered`, `autoBetween`, `autoSliced`, `autoOverlap`), which
`brush.options` sets. Corner art wins over a source. A brush saved without
a source draws as before: a kind of corner without art takes the other
kind's art. None leaves that kind of corner empty.
Docs: docs/mcp.md, docs/target-app-parity.md.
After a click picked the first object with the Blend tool, Escape did
nothing: the pick stayed, and the next click on another object blended
the two. After a blend was made, Escape did not stop the next click
adding to it either.
Escape now drops the object picked first and stops the next click
adding to the blend just made, as a click on empty canvas does, so the
next click picks a new first object. The document and the selection
stay as they are, and no undo step is added.
Docs: docs/mcp.md, docs/target-app-parity.md.
Enter Isolation Mode worked while an opacity mask was edited, and Edit
Opacity Mask and View Opacity Mask worked in isolation mode, so each
mode replaced the other's isolated art. In the reference app, isolation
mode can't be entered while a mask is edited, and mask editing can't be
entered in isolation mode.
object.isolate and perspective.editText, which shows type in isolation
mode, are now off while an opacity mask is edited, and a call returns
an error that ends "stop editing the opacity mask first". In isolation
mode transparency.editOpacityMask and transparency.viewOpacityMask are
off, and transparency.makeOpacityMask refuses one target, an object or
a layer, which it would take into mask editing; a call returns an error
that ends "exit isolation mode first". Make Opacity Mask with two
objects still masks one with the other. Pattern editing mode does not
count as isolation mode for these commands.
Object > Perspective > Edit Text, the canvas context menu and the
Transparency panel's menu and Make Mask button follow the commands'
enablement. A click or Alt-click on the mask thumbnail in isolation
mode shows the error and does not edit the mask. While a mask is
edited, the Contextual Task Bar leaves out Isolate, and the Properties
panel's Quick Actions leave out Isolate Group.
Docs: docs/mcp.md, docs/target-app-parity.md.
Escape during a Selection tool move or Alt-drag copy, a bounding-box
scale or rotation, a marquee, or a drag of a corner widget, a pie widget
or the brackets of type on a path did nothing, and the release then
applied the drag. Only a ruler guide, mirror axis or grid repeat drag
and the loaded text took Escape.
Escape in any of these drags now cancels it, the way Direct Selection
cancels its drags: the art returns to its state at the press, an
Alt-drag leaves no copy, no undo step is added, and the release does
nothing.
Outside a drag Escape works as before.
Docs: docs/mcp.md, docs/target-app-parity.md.
Envelope Options stored Anti-Alias and Preserve Shape Using, but nothing that
draws an image read them: a distorted image was always smoothed and always
cut into clip groups.
- With Anti-Alias off, each piece of a distorted image is marked pixelated
(saved as `pixelated`). The renderer draws it with nearest-neighbor
sampling and without mips, SVG export writes `image-rendering: pixelated`,
and PDF export writes it without /Interpolate.
- With Preserve Shape Using Transparency, each piece is the image with a
white opacity mask in the piece's shape instead of a clip group. The
renderer paints an image whose mask is one plain white path straight into
that path, as it does for an image in a clip group, when the path lies
inside the image's frame.
Docs: docs/mcp.md, docs/target-app-parity.md.
Escape did not cancel a drag with the Anchor Point, Mesh, Shape Builder
and Measure tools, or a Direct Selection drag of a mesh point, a corner
widget or the brackets of type on a path: the drag went on until the
mouse was released. Escape cancels every other Direct Selection drag
and a drag with the Free Transform, Rotate, Reflect, Scale, Shear and
Gradient tools.
Escape now cancels an Anchor Point drag, a Mesh tool drag of a mesh
point or handle, and a Direct Selection drag of a mesh point or handle,
a corner widget or the brackets of type on a path. The art goes back to
how the press found it, no undo step is added, and the rest of the drag
and the release send nothing. Escape during a Shape Builder drag ends
it, so the release merges and deletes nothing; the tool takes Escape
only during the drag. Escape during a Measure tool drag ends it and
brings back the measurement shown before the press. Escape after an
Anchor Point or Direct Selection press that has not moved yet drops the
press. Otherwise, outside a drag, Escape does what it did before.
Docs: docs/mcp.md, docs/target-app-parity.md.
Edit › Keyboard Shortcuts listed every engine command with a menu path,
whatever its params. A shortcut runs a command with no params, so a key
given to File › Document Setup › Units ran document.setUnits with {}
and failed with "unknown units".
The dialog and shortcuts.list now leave out a command with a menu path
and no default shortcut when no item of the menu bar runs it without
params, it opens no dialog when run without them, and its params doc
names a required field. This leaves out 38 commands, among them the
Graphic Styles, Swatches and character and paragraph style commands
that take a name. A command whose shortcut the user has changed is
still listed, where the key can be changed or cleared, and a saved key
still runs and conflicts as before. Every command with a default
shortcut stays listed.
Docs: docs/mcp.md, docs/target-app-parity.md.
The reference app disables its Lock, Hide and Show All menus in
isolation mode. In VectorCraft every item of Object › Lock and
Object › Hide, Unlock All and Show All worked there.
In isolation mode, object.lock, object.lock.above,
object.lock.otherLayers, object.hide, object.hide.above,
object.hide.otherLayers, object.unlockAll and object.showAll are now
off. Their menu items are greyed out, and a call returns an error
that ends "exit isolation mode first". The Contextual Task Bar's
Lock button is greyed out too, and the Properties panel's Quick
Actions leave out Lock. Pattern editing mode and opacity mask editing do not count as
isolation mode for these commands. The check is outside_isolation in
cmd.rs, with has_selection_outside_isolation beside it.
Docs: docs/mcp.md, docs/target-app-parity.md.
Escape did not cancel a drag with the Puppet Warp, Perspective Grid,
Perspective Selection and Liquify tools: the drag went on until the
mouse was released. Escape cancels a drag with the Direct Selection,
Gradient and Artboard tools.
Escape now cancels a Puppet Warp pin drag or turn, a Perspective Grid
handle or plane widget drag, a Perspective Selection move, resize or
plane widget drag, and a Liquify stroke. The art and the grid go back
to how they were when the drag began, the undo history does not
change, and the rest of the drag and the release send nothing. Puppet
Warp selects again the pins that were selected before the press.
During a Liquify Alt-drag that sizes the brush, Escape puts the brush
size back; the tool claims Escape only then. Escape during a
Perspective Selection press that has not moved past the drag threshold
ends the press, so moving on does not start a move. Otherwise, outside
a drag, Escape does what it did before.
Docs: docs/mcp.md, docs/target-app-parity.md.
The reference app places a new layer below the selected layer with
Ctrl+Alt-click (Command+Option-click) on the New Layer button, and a
new sublayer at the bottom of the layer list with the same click on
the New Sublayer button. In VectorCraft that click opened Layer
Options, and New Layer and New Sublayer always added the layer above
the current layer and the sublayer on top of the layer's contents.
layer.new takes below, which adds the layer directly below the current
layer at its level, and layer.newSublayer takes bottom, which adds the
sublayer under the parent's contents. In a clipping layer the new
sublayer goes above the clipping path. Each is one undo step, and
below is refused together with top. A Cmd/Ctrl+Alt-click on the
Layers panel's New Layer and New Sublayer buttons runs them. A plain
click, an Alt-click and a Cmd/Ctrl-click work as before.
Docs: docs/mcp.md, docs/target-app-parity.md.
While the Type tool edits type, Edit > Undo and Redo (the menu, the
keyboard, the History panel and MCP all run edit.undo and edit.redo)
left the caret at its byte offset, clamped to the text. Typing "abc"
before "XYZ" and pressing Undo left the caret after "XYZ".
The engine now tells the active tool about edit.undo and edit.redo
before it finishes the command. The Type tool keeps the edited text and
a list of the steps that changed it, and puts the caret, with nothing
selected, at the end of the span the step changed: where typed text
began after its Undo, after restored text after the Undo of a deletion,
and after retyped text after Redo. For the steps the tool made, it keeps
where the span ended, so text that repeats the characters next to it
puts the caret at the right end. A step that changes no characters,
such as a formatting change, leaves the caret and the selection as they
are. Typed lists keep their caret positions.
GIF, WebP and Targa files hold no resolution field, so document.formats and
the export docs now say that ppi, and the resolution that width or height
gives, are stored in the file except in those three formats.
PNG, PNG-8, JPEG, WebP, GIF, TIFF, BMP, Targa and PSD exports take
`width` or `height` in pixels. Each file is scaled so that its own
artboard, `rect` or art bounds is that wide or high, so with
`useArtboards` every file gets its own scale. `width` wins over
`height`, and either wins over `ppi` and `scale`, in the order an
Export for Screens row reads its size. The scale stays within 0.01 to
64 pixels per point and the file stores the resolution that results.
A value that is not a positive number is refused.
The per-file scale comes from `ScreenSize::scale_for`, which Export for
Screens rows already use. Rows keep their own size: their format
settings still drop `width` and `height`. `document.formats` lists the
two options for every raster format.
With `zip: true`, document.exportForScreens deflated nothing: every file
went into the archive stored. Each file is now deflated, or stored when
deflating does not make it smaller, as file.package's archive does. The
file list, the names and the reply's fields stay the same; `bytes` and
the archive's contents change. Entries keep the fixed 1980-01-01 date, so
the same files still give the same archive.
The deflating writer moves from package.rs into fileio/zip.rs as
`zip::deflate`, beside `zip::store`, and file.package calls it there with
its own date and error text. The test reader `zip::entries` reads
deflated entries too. The `zip` option's text in docs/mcp.md,
docs/control-protocol.md and the command's params says the files are
deflated.
The reference app selects all objects on a layer with an Alt-click
(Option-click) on the layer's name in the Layers panel. In VectorCraft
an Alt-click on a name did what a plain click does: it highlighted the
row and made the layer current, and the art stayed unselected.
An Alt-click on the name of a layer or sublayer now also selects its
visible, unlocked art, as the row's selection square does
(layer.selectAll), and the layer still becomes current
(layer.setCurrent). On a locked or hidden layer the click clears the
selection, as that row's selection square does. On a group or object
row, beside the name, and with Shift or Ctrl/Cmd held as well, the
click does what it did before.
Docs: docs/mcp.md, docs/target-app-parity.md.
The reference app switches the units of measurement with
Ctrl+Alt+Shift+U on Windows and Option+Shift+Command+U on macOS.
VectorCraft could set the document's units with document.setUnits or
a right-click on a ruler, but no command stepped through them and no
key did it.
document.switchUnits (Switch Units, default Cmd+Alt+Shift+U) sets the
document's units to the next one in the order a right-click on a
ruler lists them: Points, Picas, Inches, Millimeters, Centimeters,
Pixels, Feet & Inches, Meters, Yards, Feet, and from Feet back to
Points. Each press is one undo step, and the reply names the new
units. Keyboard Shortcuts lists it under Document.
The precise cursors shortcut-editor test used Cmd+Alt+Shift+U as a
free key; it now uses Cmd+Alt+Shift+Q.
Docs: docs/mcp.md, docs/ui-parity.md, docs/target-app-parity.md.
With the Width tool, Escape did not deselect the selected width points:
they stayed selected, Delete still removed them, and in isolation mode
the same Escape left isolation mode. The reference app's shortcut list
gives Esc for deselecting a width point.
Escape now deselects the Width tool's selected width points. The path,
its widths and the undo history do not change, and no command is sent.
While width points are selected the tool takes Escape, so that Escape
does not also leave isolation mode. With no width point selected, and
during a drag, Escape does what it did before.
Docs: docs/mcp.md, docs/target-app-parity.md.
The reference app switches an arc between open and closed with C,
flips it with F and changes its angle with Up/Down while it is dragged
out. VectorCraft's Arc tool ignored these keys during a drag.
While an arc is dragged out, C now switches it between an open and a
closed path, F switches its base between the X and Y axes in the same
box, and Up/Down raise and lower its slope by 10 within -100 to 100.
Each press switches once. The arc drawn on release uses the new values,
and they stay as the Arc tool's options. With nothing dragged, C and F
are shortcuts as before.
Docs: docs/mcp.md, docs/target-app-parity.md.
edit.colors.saturate's params text names intensity as required, but a
call without it, or with a string such as "40", read the intensity as
0 and still ran Saturate. It changed no visible color but recorded a
Saturate undo step.
edit.colors.saturate now reads intensity with f64_req, as shape.ellipse
reads its box. A missing, null or non-number intensity is the error
"missing number `intensity`", which changes nothing and records no undo
step. A number outside -100..100 still counts as its nearest end, and
the params text says so.
Saturate returns a color whose saturation stays the same, as at an
intensity of 0, as it was. The HSB round trip rewrote most such colors
in their last bit, so they counted as changed and lost their swatch
link.
In the same file, edit.colors.adjustBalance read a channel that is not
a number as 0, and color.harmony read steps or amount that is not a
number as its default. Both now refuse it with check_numbers, as the
commands docs/mcp.md lists for #1952 do. A null is still read as a key
left out.
Docs: docs/mcp.md, docs/target-app-parity.md.
dotCooCoo