Wire the View menu toggle and add glyph baselines and bounds to drawing snap targets so point type placement lines up with existing text when Smart Guides are on.
Co-authored-by: Cursor <cursoragent@cursor.com>
Keyboard increment (Shift ×10) moves the active glyph through text.touchType, with vertical type remapping like the Type tool.
Co-authored-by: Cursor <cursoragent@cursor.com>
Move the Preserve Editing check out of save.rs into svg.rs, where it
reads the options through `plan` as the encoder does; SaveJob::encode
still puts the warning first. Review follow-up on #2994.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A document with more than one artboard saved as SVG/SVGZ without
Preserve Editing Capabilities is written as one artboard and reopens
with one, so the others were lost without a word. The save now says so
(first, since the status bar shows only the first warning) and names the
two ways to keep them all.
Refs storytold/vectorcraft#2091
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A CMYK JPEG came out with JFIF's APP0 segment at its head and four components
in the frame:
APP0/JFIF APP14/Adobe APP2[ICC_PROFILE 1/4 … 4/4] SOF0: 4 components
JFIF describes one- and three-component images, greyscale and YCbCr, so an APP0
segment in front of a four-component frame says two different things about the
file's colours: a reader that trusts JFIF decodes nonsense, and one that checks
refuses the file. Adobe's own CMYK JPEGs carry the APP14 marker the encoder
already writes, and no JFIF. `jpeg-encoder` writes JFIF unconditionally, so the
segment is replaced here.
The resolution JFIF carried moves to an EXIF APP1 segment -- `XResolution`,
`YResolution` and `ResolutionUnit` -- which is where `cmd::fileio::ppi` already
looks when a file has no JFIF, so nothing is lost; with no resolution asked for
the segment is simply dropped. RGB and greyscale files keep JFIF, which is what
it is for.
Found while looking at #3084, whose default RGB exports are valid here; this is
the file that is not.
Join can set the surviving junction point to a corner or smooth anchor via `to`, matching Illustrator's join choice without a combined Average+Join command.
Co-authored-by: Cursor <cursoragent@cursor.com>
Mark object.isolate id as optional so runs_without_params includes it in the shortcut editor; engine already isolates the first selected object when id is omitted.
Co-authored-by: Cursor <cursoragent@cursor.com>
When copying a loaded .acb into the user library, use the parsed book
title instead of a macOS sandbox temporary name (storytold/vectorcraft#2996).
Co-authored-by: Cursor <cursoragent@cursor.com>
Honor the requested text mode in the single-page importer, as Open does, instead of forcing outlines for Place and PDF clipboard import.
Add synthetic regressions for bytes, unlinked paths, selected pages and explicit outlines. Update format parity and milestone evidence without changing scores.
With the Anchor Point tool, a drag from an anchor pulls out smooth handles.
Shift held at the press now moves the anchor instead, its handles keeping
their offsets; Shift kept down during the drag keeps the move at 45° steps
(the constrain angle), released it frees it. A Shift-click that doesn't
move leaves the anchor as it was. A selected blend's spine points follow
the same rule (object.blend.spine.moveAnchor).
The move goes through a new engine command, path.moveAnchor
{id, subpath?, anchor, x, y}, since path.moveAnchors only acts on the
direct-selected anchors and the Anchor Point tool keeps no anchor selection.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
document.pdfInfo read thumbnail with as_u64, so a value such as -1,
1.5, "1" or true gave a reply without a thumbnail and no error. This
happened for a PDF and for a PostScript file.
A thumbnail that is present and not null must now be a whole number
from 1 to the page count. Any other value is the existing "thumbnail:
no page {n} (the PDF has {count})" error, or "(the file has 1)" for
PostScript, with the value as given. An absent or null thumbnail still
gives no thumbnail.
Found while testing crates/engine/src/cmd/path.rs:632 (without_anchors, closed-path branch uses keep instead of open_run)
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
VectorCraft had no Objects on Path. A click with the Objects on Path
tool attaches the selected objects to the path clicked. The tool is in
Edit Toolbar's Modify section and the Blend tool's flyout, and Object ›
Objects on Path › Attach and the context menu with two or more objects
selected choose it. The objects and the path go into an Objects on
Path group with the path at its bottom.
- object.objectsOnPath.attach orders the objects column by column from
left to right and top to bottom in each column. The first one sits
on the path's first anchor, the last one sits on the end of an open
path, and the rest are spread evenly by length; a closed path takes
them all the way round. Each object's attachment point (Pivot, one
of nine, default the center of its bounds without strokes) sits on
the path, and the object is turned to the path there. An object that
was rotated by an angle other than a multiple of 90° is first turned
to the nearest multiple of 90°. Rotate tilts every object by that
many degrees counter-clockwise. Symbol instances are measured by
their art. Guides, compound paths, type, paths without length and
graphs are refused with a reason.
- After every edit the objects go back on the path: editing the path
moves them, an object moved on its own goes back, and objects moved
into or out of the group in the Layers panel join the end of the
path or leave it. Scaling, shearing or reflecting the whole group
keeps each object's scale, shear or reflection, and the objects are
spread evenly along the transformed path again. Undo takes the path
and the objects back in one step, and a copied group stays live on
its own path.
- object.objectsOnPath.options changes Pivot and Rotate, and
object.objectsOnPath.expand leaves a plain group. Both act on the
groups that `ids` names, or on the groups of the selection when
`ids` is not given.
- The native file keeps the group live; SVG, PDF and the other exports
write plain art. The tool highlights the path under the pointer, has
a cursor entry, and Escape during a press cancels the click.
Part of #2545
Docs: docs/mcp.md, docs/target-app-parity.md.
Choosing a data set in the Variables panel, stepping through data sets
with the panel's arrows, and running `dataset.select`, `dataset.next`
and `dataset.prev` applied nothing and showed no message when no object
was bound to a variable that the data set has a value for. This
happens, for example, after Import Data Sets… defines new variables
without binding them.
The app now shows "nothing in data set A was applied: no object is
bound to a variable it has a value for" in the status bar, and the three
commands add it to the reply as `warning`. A data set with a value for
a bound variable gives no warning even when every object bound to it is
locked; `skipped` counts those objects. What applying a data set does
is unchanged.
Docs: docs/mcp.md, docs/target-app-parity.md.
PNG, PDF, EPS, legacy `.ai`, packaged zips and saved `.vectorcraft` files
record the wall-clock time they were made in, so the same commands run twice
gave different bytes although the pixels matched (#2880):
PDF /CreationDate and /ModDate D:20261018155816 vs D:20261018155817
PNG the `Creation Time` tEXt entry
.vectorcraft one byte of the stored date
SVG carries no time, and already repeated
`metadata::output_time` is the time a file records: `SOURCE_DATE_EPOCH` when it
holds a non-negative whole number of seconds, else the clock, as the
reproducible-builds specification defines it. A date a command is given
(`file.new {created}`, a save's `modified`) still wins over the variable, and a
blank, negative or non-numeric value is ignored so that an export is never
refused over the environment.
`metadata::now_unix` keeps the real clock and now has exactly two callers, both
of which must not be pinnable from the environment: the recovery heartbeat, and
the seed PDF encryption draws on.
A .ai saved without PDF compatibility has only a placeholder page in
its PDF part. document.open reads such a file from its editing data,
but with `pages` given it failed with "the file holds only a
placeholder page", even for "1" on a file of one page.
When `pages` names every page of the file, document.open now reads
the editing data as it does without `pages`.
Docs: docs/mcp.md.
A PDF or PDF-compatible .ai saved with Preserve Editing carries the
native document as an embedded file, with a hash of its pages at the
end of the file's /Desc. The import read /Desc with from_utf8_lossy and
looked for "hash ". /Desc is a PDF text string, which may be written as
UTF-16BE with a byte order mark (ISO 32000-1 7.9.2.2). Written that
way it holds no UTF-8 "hash ", so the import found no hash, took the
editing data as intact and reopened the native document with no
warning, even after another app had changed the pages.
/Desc is now read with text_string, the importer's decoder for text
strings, so the hash is found in UTF-16BE, UTF-8 and PDFDocEncoding.
Changed pages open as artwork with the "changed in another app"
warning. The embedded file's /UF and /F names are decoded the same
way, so editing data named only in UTF-16BE is found.
A /Desc without a hash is still trusted, as before.
alongtheblue-sketch took 0.12.0's version 7 output of the SVGs in #2692
and #2830, edited it by hand and opened it in the reference app
(https://github.com/storytold/vectorcraft/pull/2801#issuecomment-6244853548).
Writing the image lines as #2801 does, with the bracketed matrix and
the 60-digit data lines, did not change the result there. With one
line, F, added after %AI5_EndRaster, the reference app opened the image
in its clipping group and the art after it in both files.
The writer now writes F after every %AI5_EndRaster: clipped, grouped
and loose images, flattened images and images in pattern tiles. No path
is open at that point, so the line paints nothing. VectorCraft's reader
opens the files with the same objects as before, and the file's
PostScript prolog draws the same page.
path.curvatureEdit, path.removeAnchor, path.convertAnchor,
path.reshapeSegment, path.split, path.setHandle and path.insertAnchor
read subpath as an unsigned integer and fell back to 0 for any other
value. A subpath of 1.5, -1 or "1" edited subpath 0 and the command
reported success. path.split read anchor and segment with as_u64 too
and treated any other value as absent, so a bad anchor beside a good
segment split at the segment.
These commands now refuse a subpath that is not a whole number of 0 or
more with "missing integer `subpath`", the error path.curvatureEdit,
path.removeAnchor, path.convertAnchor and path.reshapeSegment already
give for a bad anchor or segment, and path.split refuses such an anchor
or segment too. Without a subpath, or with null, they edit subpath 0 as
before. The document and the undo history stay as they were after each
error. The params text of the six commands that listed subpath as
required now marks it optional.
Docs: docs/mcp.md, docs/target-app-parity.md.
craft-docpath follows a network path only on the share the document is
on, and its caller contract asks for a document opened from a mapped
drive to be passed by its UNC path. fileio::document_path passed the
drive path as given, so a document opened as Z:\jobs\doc.vectorcraft
treated a link stored as \\server\share\img\logo.png, on the share
behind Z:, as on another computer: the image was missing, and
document.open, links.check and links.info gave refused: "the path is on
another computer".
On Windows, when a stored path is refused as on another computer and
the document is on a drive, document_path now reads the final path of
the document's folder (std::fs::canonicalize). When that names a share
(\\?\UNC\server\share\...), the path is checked again against the
document's path on that share. Links on other computers stay refused,
and paths that were followed resolve as before. Opening a document,
Link Info, links.check and the linked-file watch all use it. Other
systems are unchanged.
Docs: docs/mcp.md, docs/target-app-parity.md.
Transform Each, Rasterize, Create Object Mosaic, Create Trim Marks and
Rearrange All Artboards read their optional numbers with f64_or, which
falls back to a default for a value that is not a JSON number.
object.transformEach {"scaleH": "50"} left the selected objects at
their size and reported success. Rasterize did the same with ppi,
Create Object Mosaic did the same with width, height, spacingX and
spacingY, Create Trim Marks did the same with offset, length, bleed and
weight, and Rearrange All Artboards did the same with spacing. Crop
Image cropped to the artboard when rect was a string or another value
that is not an array.
These commands now fail with "`<key>` must be a number, not <value>"
for a value that is not a number or null, as the transform commands
do, and change nothing. Transform Each checks scaleH, scaleV, moveH,
moveV and rotate. Crop Image refuses a rect that is not an array of
four numbers with "rect must be [x, y, width, height]", the message it
already gave for an array of the wrong length; a null rect crops to the
artboard, as a missing one does.
Docs: docs/mcp.md, docs/target-app-parity.md.
document.pdfInfo refused PostScript (an EPS, a .ps file, or a .ai in
PostScript form), mostly with "this is a PostScript file ..., not a
PDF", although document.open and file.place read the same file
through the EPS reader as one page.
It now answers {pages: 1, needsPassword: false, pageInfo: [{width,
height, rotation: 0, boxes: {}}]}. The page is the file's bounding box
(%%HiResBoundingBox when it has one, a US Letter page without one),
read from its comments without running its program. thumbnail: 1 is a
PNG of what that page prints, read by the EPS reader without any
editing data the file carries. A program whose header is only %! is
read as PostScript, as clipboard.importEps reads it.
Docs: docs/mcp.md, docs/target-app-parity.md.
The PostScript interpreter that reads EPS and PostScript .ai files
accepts a FlateDecode or LZWDecode filter with Predictor 2 at
BitsPerComponent 1, 2, 4, 8 and 16, but undid the horizontal
differencing only at 8 bits. At the other depths the filter gave back
the stored differences, and the image drew them instead of its
samples.
The predictor is now undone at every depth it accepts, as ISO 32000-1
§7.4.4.4 describes: each component adds the same component of the
pixel to its left, within its bit width, and each row starts again.
16-bit components add as big-endian 16-bit numbers. The padding bits
at the end of a row stay as they are, and 8-bit data takes the same
path as before. The PNG predictors are unchanged.
Docs: docs/target-app-parity.md.
A compound path holds its members, so select.color passed over it and
looked at the members instead, whose paint inspect doesn't report: a
black compound path (art with holes, as PDFs bring in) never matched
"#000000". It now matches by its own fill and stroke, and its members
never do. Type without characters reads as the default character fill,
as inspect reports it (CodeRabbit on #2939).
Scripts had to know an object id before they could select art by colour
(select.same.* and select.magicWand start from one). select.color
{fill?, stroke?} takes colours as paint.setFill does and selects the
objects whose fill and stroke read as them in #rrggbb, as
document.inspect reports colours, with Select > Same's selection rules.
The label is translated in each of the 23 catalogs, which
complete_languages_translate_every_menu_string requires.
While a Type tool edited text, a click on blank canvas ended the
editing and also placed new point type at the click. Area Type and
Type on a Path did the same with a click on a path.
Such a click now only ends the editing. The typing session is
committed, empty point type that a click placed is discarded as before,
and the Type tool in use stays active; the next click makes new type.
The same applies when the editing began with a double-click from a
selection tool. A click on other type still edits it at once, and a
drag that draws an area-type frame still makes the frame.
anchor_arc_distance measured every segment again for each anchor, so a reshape cost the square of the anchor count; path.reshape now measures the positions once, and the two helpers only it used are gone. The default radius stays half the subpath's bounding-box diagonal, now measured along the path: half its length reached the far corners of a square, moving art the grab is nowhere near (reshape_moves_the_grabbed_point_and_its_neighbourhood).
path.freehand takes redraw: {id, within}: the stroke's ends are placed on the path, anchors added there, and the section between them replaced by the fitted stroke, the shorter way round a closed subpath; a stroke that doesn't end on the path still draws a new one. The Pencil and Paintbrush send it for a stroke that starts on a selected path's outline away from its ends, within Edit Selected Paths' distance.
While an export runs in the background (Background Export), a dialog shows
what is being exported and how far it has got: artboard by artboard for a
raster export of several artboards, busy otherwise. Cancel (also Esc) stops
it and writes no file; Continue in Background leaves it to the status bar.
It opens after 0.4 s and never over another dialog.
Built on the shared vectorcraft_doc::cancel (#2546): fileio::progress::Progress
wraps its CancelToken and a progress sink, so a cancelled export stops
drawing and keeps no half-drawn pattern tile or effect raster.
- ui: background jobs carry their Progress; export_progress draws the
dialog; UI commands file.cancelExport and file.exportInBackground.
- i18n: the strings in every language with complete menus, Danish, Dutch
and Indonesian included; "{n} more exports waiting" is a plural (trn).
- docs: ui-parity, gaps (G12) and ROADMAP rows.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Dt49z1ubK9x1bPq51APgz3
The Paragraph panel menu's Justification… was a disabled stub, and justified
lines stretched word spaces between fixed limits (80% to 150%).
Each paragraph now has Justification options: Word Spacing, Letter Spacing
and Glyph Scaling (Minimum, Desired, Maximum, in percent), Auto Leading and
Single Word Justification. Desired applies to every line; a justified line
fills its measure with word spacing first, then letter spacing, then glyph
scaling, each within its range, and past them its word spaces take the
rest. The Every-line Composer scores lines by that flexibility. Auto
Leading sets the leading of characters whose leading is Auto. A justified
line holding one word is spread between its letters (Full Justify) or
aligned left, centre or right.
The defaults are the documented ones (80/100/133, 0/0/0, 100/100/100, 120,
Full Justify), saved only when they differ. Because the default maximum
word spacing is 133%, justified paragraphs break differently than before;
the Every-line Composer's second pass is now unbounded for justified text
(it used to give up past four times the stretch and fall back to the
Single-line Composer, which the narrower default range would make common),
and lines that can't stretch at all are still refused.
text.setFormat takes wordSpacing, letterSpacing, glyphScaling ([min,
desired, max] or {min?, desired?, max?}), autoLeading and
singleWordJustification; Minimum ≤ Desired ≤ Maximum must hold or nothing
changes. Paragraph styles carry the options (New and Redefine capture
them), and Reset Panel resets them. Justification… opens a dialog
(ui.justification) with Preview; OK is disabled while a row is out of
order. Live SVG text places characters the options move, and a glyph that
Glyph Scaling scales is stretched to its width; PDF uses the glyphs'
transforms. Vertical type isn't glyph scaled; type on a path doesn't use
the options.
Docs: docs/mcp.md, docs/type-parity.md, docs/gaps.md.
Closes#2755.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The blend, envelope and gradient mesh commands read their optional
numbers with f64_or or as_f64, which fall back to a default for a value
that is not a JSON number. object.blend.make {"steps": "8"} made a
Smooth Color blend and reported success. Blend Options did the same
with steps, distance and value. Make with Warp, Reset with Warp and
Envelope Options did the same with bend, h and v (and their long
names). Make with Mesh, Reset with Mesh and Create Gradient Mesh did
the same with rows, cols and columns. Envelope Options did the same
with fidelity, Create Gradient Mesh did the same with highlight, and
Set Mesh Point Color did the same with opacity.
These commands now fail with "`<key>` must be a number, not <value>"
for a value that is not a number or null, as the transform commands
do, and change nothing. Envelope Options refuses the warp keys whether
or not a warp envelope is selected. Create Gradient Mesh refuses an
`at` that is not exactly two numbers with "`at` must be [x, y]".
Before, it took the first two entries of a longer array, and for any
other value it made a mesh with no lines through the point.
Docs: docs/mcp.md, docs/target-app-parity.md.
A move that Shift kept level, upright or on a diagonal left that line
when it snapped. With View › Snap to Grid on, a level Shift-drag also
moved the selection up or down onto a gridline, and Snap to Pixel,
Smart Guides and Snap to Point moved it off the line in the same way.
Each axis snapped on its own after Shift had constrained the move.
With the Selection tool, and with Group Selection and Direct Selection
moving whole objects, a Shift-constrained move now slides along its
line until it snaps. With Snap to Grid or Snap to Pixel, the move
slides along the line by the shorter of the two distances that put it
on a gridline or a whole pixel on either axis. The bounds line up with
the other objects, or space evenly with them, only on the axes the line
runs along, and the grabbed point stops where the line passes an anchor
or crosses a ruler guide. A level or upright move snaps along its own
axis only. Moves without Shift snap as before.
Docs: docs/target-app-parity.md.
PathData::bounds measured each segment by its start, end and extrema,
as kurbo's bounding_box does. For a curve with a handle at about 1e308
in size, or an infinite one, kurbo's extrema computation overflows and
drops the extreme. The box then held only the anchors. The canvas check
after an edit reads that box for the selected objects, so path.create
kept a curve with handles at 1e308.
The new segment_bounds measures a segment by its control points when
one of them has an x or y that is infinite or larger in size than
f64::MAX / 16, and by its extrema otherwise, bit for bit as before.
curve_bounds joins those boxes as kurbo does, and PathData::bounds uses
it, so such a curve's box holds the whole curve and the canvas check
refuses an edit that leaves one selected.
Docs: docs/mcp.md, docs/target-app-parity.md.
