With the Artboard tool, File › Revert kept the active artboard, but a
command.batch with a file.revert step made artboard 1 the active one.
A batch that switched to another document and back, and the Actions
panel menu's Batch… over a folder whose files it closes or over data
sets with a Revert step, did the same. Each of them starts the tool
afresh and ends in the document it started in, and the app moved the
view to the fresh tool's artboard 1. Only a plain file.revert was
handled, by its command id.
The engine now counts the times switching or closing documents, or
replacing the active one, starts the tool afresh (Session::tool_resets),
and records whether the tool's options were set after that
(Session::tool_set_since_reset). When the count changes during a
command and nothing set the tool's options after it, the app starts
the tool on the active artboard, as it does when a command chooses
another document. When a later step chose the tool's artboards (a
Paste or Cut after the revert), the artboard the tool then has active
becomes the active one.
Docs: docs/mcp.md, docs/target-app-parity.md.
With Pick Color From Artwork, a Shape Builder merge took the look of
the front-most object over the first covered region the drag touched,
and the current fill when the drag touched only areas no object
covers. The reference app's combine page gives the look of the object
where the drag starts, else of the object where it ends, else of the
topmost selected object.
shapeBuilder.merge now follows that rule: the merged shape takes the
appearance, opacity and blending mode of the front-most of the objects
it is given (the selection by default) under the first point, else of
the one under the last point, else of the front-most of those objects.
A drag from a hole across a gray bar into a red square now gives a red
shape, where it gave the bar's look. A click in an area no selected
object covers, such as a hole that gray bars enclose or a triangle
that lines enclose, takes the front-most selected object's look
instead of the current fill. Pick Color From Color Swatches works as
before. The tool already sends the press point first and the release
point last.
Docs: docs/mcp.md, docs/target-app-parity.md.
PDF import measured each gap between two glyphs against the larger of
the line's first glyph size and the next glyph's. A word set beside a
much larger one, apart by positioning and no space glyph (a browser's
margin between two sizes), stayed under a fifth of that em: "≤ 4" at
20 pt and "hours" at 8 pt, 3.4 pt apart, came in as "≤ 4hours".
A gap is now measured against the smaller of the two glyphs beside it.
Lines in one size read their gaps as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Illustrator 30.0's gradient Dither, from the public documentation
(https://helpx.adobe.com/illustrator/desktop/paint-and-fill/create-and-edit-gradients/control-dither-in-gradients.html):
a Dither checkbox in the Gradient panel; dither converts the gradient into
pixels with subtle noise, works with gradient fills only, and follows the
Document Raster Effects resolution.
- Gradient gains `dither` (serde default false, written only when on, so
older files open unchanged and new files keep it).
- The renderer draws a dithered linear or radial fill as an image paint: the
gradient sampled a cell per device pixel or finer (quarter-octave steps,
cached per thread), each channel given seeded triangular noise of up to a
level before rounding. Same pixels every run; strokes and undithered fills
draw exactly as before. PNG and other raster exports go through it.
- SVG and PDF write a dithered fill as an image at the document's raster
effects resolution, clipped to the shape (the freeform-gradient path);
characters' fills stay vector gradients in SVG, with a warning.
- paint.editGradient and paint.setFill take `dither`; strokes refuse it.
The Gradient panel's Dither box is dimmed behind the Stroke proxy.
- i18n rows in all 24 catalogs; docs: G13, target-app-parity, ui-parity,
mcp.md, plugins.md.
The File Handling preference Link Placed PDF and .ai Files
(linkPlacedPdf) is removed. File › Place with Link now places a page of
a PDF, .ai or .ait file read as PDF pages as a linked placed document,
as it links a raster image, and link: false embeds the page. Link is on
by default in the Place dialog and in file.place, so a PDF or .ai page
placed from a file, which used to be embedded, is now linked unless
Link is off. A password or textAs: "outlines" still embeds, and so do
EPS and PostScript .ai files.
The Place dialog's Link tooltip describes a PDF or .ai file as a
document.
A .ai file read from its editing data (its PDF part only a placeholder)
finds the files its art places by name, beside it. Package now copies
those files into the same folder as the .ai file, and warns when one has
to be copied under another name.
File › Place with Link kept a link only to raster images and VectorCraft
documents. A PDF, .ai or .ait page was always embedded as a group, so
Update Links never saw a newer version of the file.
A new preference, File Handling › Link Placed PDF and .ai Files
(linkPlacedPdf), is off by default. With it on, Link places the page as
a placed document, as it places a VectorCraft document: the object
keeps the file's bytes, a preview, the page number and the page's box
(crop, art, trim, bleed or media, stored as page_box). Links check,
update and relink it, Break Link and Object › Expand give the group
placing it without Link gives, every output draws the page's vectors,
and saving and reopening keep the link. With the preference off, or
with a password or textAs: "outlines", the page is embedded as before.
EPS and PostScript .ai files are still embedded.
Package copies a placed PDF or .ai file as it is. The Place dialog's
Link tooltip describes a PDF or .ai file as a document while the
preference is on. Relinking a placed document to a file that is not a
VectorCraft document, a PDF or a PDF-compatible .ai file says so.
Docs: docs/mcp.md, docs/target-app-parity.md.
- One budget for the whole read (layers, pixels, characters, table
cells), shared with embedded documents and charged also when their
reading fails; the first reading is dropped before the second.
- Tables: at most 65 536 cells; lines and cell formats that don't
match the grid are left out instead of shifted.
- Paragraph formats matched to runs by binary search; font names
longer than 256 bytes are dropped.
- Overlays: one work budget per import; encoded originals decoded
within their layer's size; table cell outlines recoloured too.
- Engine: master page copies capped, each page's master found in
linear time, line gaps looked up once per font, the working CMYK
table built once, objects past MAX_COORD left out.
- Embedded content stays with its node; pixel masks under artistic
text are read whole and include stroke reach; gradient overlays on
hidden layers are kept.
- Render: contexts and raster effect images stay within
MAX_RASTER_SIDE per side (vello overflowed near u16::MAX; found by
the new fuzz target).
- Tests: affinity tests/import_limits.rs, feature samples in
import_fuzz.rs, shared builders in engine/tests/support/.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Strokes set to None no longer import as black 1px strokes.
- Underline and strikethrough are kept.
- Frame text starts at cap height; lines hanging out of a frame make it taller;
mixed-alignment artistic text lines up within its longest line; line breaks
inside a paragraph get no paragraph spacing.
- Table cell text taller than its cell is centred and stays visible.
- Outline effects on stroked shapes are drawn around the stroke.
- CMYK pixel layers go through the document's embedded CMYK profile; without
one, opaque layers stay CMYK.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
An export through the desktop save panel kept any typed extension
that names a known format, whatever format it wrote. Export As with
PNG chosen and card.svg typed wrote PNG data to card.svg, and Save as
PDF, Save for Office Documents, Text Export Options, Export Library
and the other writes that go through pick_path did the same.
document.exportSelection with a format suggested and added .png
whatever the format.
Such an extension is now replaced with the written format's, as Save
As has done since #3372: card.svg is written as card.png. An extension
of the written format stays as typed in any letter case (photo.JPEG
for JPEG), Export As SVG (and file.exportAs, file.export.svg) keeps
art.svgz and writes it compressed, and document.exportSelection
without a format still writes the format the typed extension names.
With a format, it suggests and adds that format's extension.
Docs: docs/target-app-parity.md.
File › Package… read every linked file and font and wrote the package
on the UI thread, so the window stopped responding until the package
was written. For a document that links 50 images of 21 MB each, OK
with Background Export off, which does the same work, takes a median
of 2.25 s in a release build on Windows.
With Enable Background Export on (Preferences › File Handling), OK now
takes the options, the report's Document Info text and a snapshot of
the document, and closes the dialog. The thread that writes background
saves and exports then collects the links and fonts and writes the
package. The same OK takes 0.001 s, and the package holds the same
bytes. A save of unsaved changes that Package starts is written first.
With the preference off, on the web and over MCP and scripts, the
package is made at once with the same reply as before.
Docs: docs/target-app-parity.md.
With the Artboard tool, Paste and Paste in Place select the pasted
artboards, Cut gives the tool the artboard before the first cut one
(the new first artboard when artboard 1 is cut), and tool.setOption
sets its selected or active artboard. The active artboard, the view's,
stayed where it was, so the navigator showed another artboard than the
tool and the Artboards panel. document.activate and File › Revert
started the tool on artboard 1, while choosing a document's tab starts
it on that document's active artboard.
After a command that changes the artboards the Artboard tool has
selected, the app now makes the tool's active artboard the active one,
as a click with the tool does. After a command that chooses another
document, and after Revert, the tool starts on the document's active
artboard.
Docs: docs/mcp.md, docs/target-app-parity.md.
Exporting a CMYK document to PDF/X-1a or PDF/X-3 flattens transparency
first. Where the flattener has no single colour (an image with see-through
pixels over a flat fill, gradients, masks, raster effects) it renders the
area into an image, and that image was always an RGB PNG. The PDF writer
then separated it back to CMYK, so CMYK art behind the image came back with
other inks: a C100 M6 Y41 K3 panel printed C75 M14 Y35 K5 under a
transparent logo, with a hard edge against the rest of the panel, and K
moved into C, M and Y.
For files without transparency the flattener's images are opaque and
clipped to their regions anyway, so in a CMYK document it now draws them
as ink amounts over the paper (Renderer::render_region_inks) and stores a
CMYK TIFF, which the PDF writer keeps as DeviceCMYK samples. An area too
large for a CMYK image falls back to the PNG it made before. In-app
Flatten Transparency and other flattening, whose images keep alpha, are
unchanged.
Test: tests_pdfx::pdfx_1a_flattening_keeps_the_inks_behind_an_image_in_a_cmyk_document
exports a CMYK panel under a half see-through PNG to PDF/X-1a, opens the
file again and checks the inks behind the see-through half.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Exercise Selection-tool busy state before takeover and verify it is idle after tab activation, drop, Escape and outside release. Session::set_active already reconstructs the tool via reset_tool_for_doc_switch, so the reported missing-Up busy state does not reproduce and no additional synthetic release is needed.
Narrow documentation to the internal clipboard asserted by the regressions and correct the stationary-pointer sentence. All 10 cargo xtask ci gates pass.
With the Artboard tool, a Ctrl/Cmd double-click on the name of an
artboard that was not selected added it with the first click and took
it out again with the second, so the name field renamed that artboard
alone. The panel menu's Rename opened the field on the active artboard
even when it was not selected. Paste with the Artboard tool leaves it
outside the selection: it selects the pasted artboards and keeps the
active one. Rename then renamed the active artboard alone.
The second click of a Ctrl/Cmd double-click now leaves the row's
artboard selected, and the field renames the selection with it. A
Ctrl/Cmd double-click on a selected row works as before. When the
active artboard is selected, Rename opens the field on its row;
otherwise Rename opens the field on the first selected row.
Docs: docs/target-app-parity.md.
path.create read closed only when it drew from anchors. Given path
data, {"d": "M0 0 L10 0 L10 10", "closed": "true"} drew the path and
recorded an undo step, while the same closed with anchors fails with
"`closed` must be true or false". shape.rectangularGrid and
shape.polarGrid read rows, columns, concentric and radial given as text
as the count left out, so {"rows": "3"} drew the default 5 horizontal
dividers instead of 3.
path.create now checks closed before it reads d or anchors, and the
grid commands refuse such a count with "`rows` must be a number, not
"3"". Neither command changes the document or its undo history then.
With d, a closed of true, false or null still leaves the path as its
path data draws it.
Docs: docs/mcp.md, docs/target-app-parity.md.
Add the three Turkish catalog entries requested by the maintainer on #3479. Preserve upstream catalog additions and place existing tab-drag entries beside stable menu labels to avoid append conflicts. Update feature progress notes for all 24 catalogs.
Simplify an equivalent Effect Gallery selection predicate required by the Rust 1.95 clippy gate. Full cargo xtask ci passed all 10 checks, including tab-drag regressions and wasm.
object.transformEach refused reflectX, reflectY, random and copy given
as text, but read strokes, corners, objects and patterns given as text
as the key left out. With Scale Strokes & Effects on,
{"scaleH": 200, "scaleV": 200, "strokes": "false"} scaled the stroke,
recorded an undo step and kept the params for Transform Again, which
repeated the call. artboard.rearrange, artboard.move and
artboard.duplicate read their patterns option the same way, and
artboard.setProps reads its patterns, strokes and corners options the
same way.
These commands now refuse such a value with "`<key>` must be true or
false" before they change anything. So do the other options and
numbers of artboard.setProps and artboard.move, the art of Duplicate,
Copy and Cut Artboard, the shape commands and path.create, path.close,
path.setHandle, path.moveAnchors, the Pencil, Curvature, Reshape
Segment and Blob Brush options, text.create, text.createInPath,
text.setRangeStyle, text.editRange, text.getRange, text.touchType,
text.areaOptions, type.step, the font size steps,
type.opticalMarginAlignment, type.systemLayout, type.fractionalWidths,
type.ruby, the symbol and swatch commands, the Appearance panel's
commands, the gradient and freeform gradient commands, Shape Builder,
Live Paint, Image Trace, the opacity of object.setProps, the radius,
sides and relativeRadii of object.setLiveShape, the reference point of
object.setBounds and the artboard of Align, Distribute and Distribute
Spacing. They refuse a number given as text with "`<key>` must be a
number, not <value>", and a gradient stop's tint with "stop <n>:
`tint` must be a number". A null still reads as the key left out.
Docs: docs/mcp.md, docs/target-app-parity.md.
On Linux and the BSDs, where the save dialog reports the file type
picked in it, a name that still ends in the suggested name's extension
gets the picked type's extension. The comparison was case-sensitive,
so Untitled-1.VECTORCRAFT with "PDF-compatible .ai" picked was saved
as a native file named Untitled-1.VECTORCRAFT instead of Untitled-1.ai.
with_picked_type now compares the lower-case extensions that
fileio::extension gives. A name typed with the picked type's own
extension in another case (a.AI with .ai picked) stays as typed.
This follows up #3372.
Docs: docs/target-app-parity.md.
Activate visible tabs after a delayed Selection drag and copy artwork through a document-scoped command without changing the clipboard or source. Cancel stale transfers, preserve pattern alignment and transparency, and insert into the editable destination context. Cover pointer gestures, resource rendering, input bounds and locked layers; translate the new labels and messages.
A workspace remembers the changes made in it: switching away keeps them
(UiState::workspace_changes, kept with the preferences), switching back
restores them, and Reset <name> returns to the saved layout. Saving a
workspace starts it with no changes; renaming keeps them, deleting drops
them, and deleting the current workspace shows Essentials as it was
left. Saved preferences recover a damaged remembered layout instead of
losing the whole file.
Split from #2965 as a reviewer asked.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KcHisW1vt6pkVPYbzL6Cpg
## Summary
Aligns parity checklists with shipped View › Snap to Glyph behaviour (#3124):
when Smart Guides are on, drawing tools snap to live-text baselines and glyph
bounds via `view.snapToGlyph`. Adds a headless test that `view.snapToGlyph`
toggles the UI view flag like Illustrator’s menu item.
## Tests
- `vectorcraft-ui-egui`: `snap_to_glyph_menu_command_toggles_the_view_flag`
- Existing `tools::text_tests::snap_to_glyph_lines_up_new_point_type_with_a_baseline`
Part of gap G4
Co-authored-by: nrq6993-a11y <nrq6993-a11y@users.noreply.github.com>
A filter could reshape and repaint objects, but not set the stroke's
join, cap or miter limit, nor the effects an object's appearance holds.
A tool that prepares objects for a live effect (a sheet of samples,
each with the effect at its own settings) had to leave the user to
apply the effect to each object by hand.
- Each input stroke has its join, cap and miterLimit beside its paint
and width (live effects get the same, through the shared encoder),
and each object its own effect records, {id, params, visible}.
- An output stroke may set them (miter limit clamped to 1-500), and an
output object's "effects" replaces its own effects.
- The host admits each record as effect.apply does: an effect that
effect.list lists or an installed live-effect plug-in, parameters it
takes (filled in to their defaults; a plug-in's checked against its
manifest), one 3D effect that fits the object (its fills' and
strokes' own effects counted), and the texture of an effect with
Load Texture (Glass, Texturizer) as the effect stores it, never a
file to read. A record the object already had stays as
it is, so a filter that hands its input back changes nothing. One
refused record refuses the whole output and the document stays as
it was.
The plug-ins crate checks the records' form; which effects exist is the
engine's to say (objects::AdmitEffects, engine plugin::admit_effects).
effects::validate_three_d is the one check of whether a 3D effect fits
an object, for effect.apply, effect.setParams and the filters.
A path handed back as it was now stays the live shape it was: write()
dropped a live rectangle's or ellipse's parameters whenever the output
held a path, changed or not, so a filter that returned its input
turned a live rectangle into a plain path.
objects/tests.rs checks the round trip, stroke styles on existing and
new strokes, the host's refusal, the bad forms refused, and a live
rectangle handed back unchanged (a plain path before the fix);
tests_plugins.rs runs filters that set a built-in and a plug-in effect,
an echo that changes nothing, and six refused outputs.
CRAFT_PLUGIN_FRAME_WASM=<folder> saves a test filter to try in the app.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HhvnnnD5fTFupK8WWq35un
Glyphs placed one by one with even gaps could be letters set apart or
words of one letter each, and a file's positions can't tell them apart.
The spacing a line's letters share is now taken off its gaps only when
the line also shows where its words break: with spaces it draws (as
with Tc), or with gaps wider than the rest (tracked words placed glyph
by glyph). Otherwise every gap past a fifth of an em is a space, as
before, so A, B, C and D placed with ordinary word spaces between them
still come in as "A B C D".
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Mirko Kerezovic