The SVG writer always wrote the document's title in <title>
(crates/svg/src/export.rs), so every file of Export As with Use
Artboards, Export for Screens or an `artboard`/`range` export was titled
after the document ("Icons"), whatever its artboard was called. The
writer's `artboard` option can't tell those apart from Save: Save writes
the first artboard too, standing for the whole document.
ExportOptions has a new `artboard_title` (set by the caller, as
`artboard` is, not deserialized): the file is that one artboard, exported
on its own, and its <title> is the artboard's name (XML-escaped as
before), or the document's title when the artboard has no name. The
engine's SVG encoder (fileio/svg.rs) sets it exactly when the export
names its artboards, which is also when a file holds only that
artboard's art (#550): Export As per artboard, document.export /
serialize with `artboard` or `range`, MCP export, and Export for Screens'
artboards, assets, layers and selections (each written as an artboard
named after it). Save and Save As keep the document's title. Export for
Screens' Full Document draws the art bounds as one artboard, which is now
named after the document, so its SVG keeps the document's title too.
docs/file-format-parity.md's SVG row says so.
Tests: title_control_chars::an_artboard_exported_alone_is_titled_after_it
(crates/svg: two named artboards, the second named with markup;
exporting either alone gives its escaped name, the default and an
artboard without artboard_title give the document's title, an unnamed
artboard falls back to it) and
tests_svgenc::an_svg_of_one_artboard_is_titled_after_it (the engine:
`artboard` 0 and 1, useArtboards range all, Save's SVG, Export for
Screens per artboard, an asset and Full Document). Both fail without the
change (the title was "Icons") and pass with it.
- One budget for the whole read (layers, pixels, characters, table
cells), shared with embedded documents and charged also when their
reading fails; the first reading is dropped before the second.
- Tables: at most 65 536 cells; lines and cell formats that don't
match the grid are left out instead of shifted.
- Paragraph formats matched to runs by binary search; font names
longer than 256 bytes are dropped.
- Overlays: one work budget per import; encoded originals decoded
within their layer's size; table cell outlines recoloured too.
- Engine: master page copies capped, each page's master found in
linear time, line gaps looked up once per font, the working CMYK
table built once, objects past MAX_COORD left out.
- Embedded content stays with its node; pixel masks under artistic
text are read whole and include stroke reach; gradient overlays on
hidden layers are kept.
- Render: contexts and raster effect images stay within
MAX_RASTER_SIDE per side (vello overflowed near u16::MAX; found by
the new fuzz target).
- Tests: affinity tests/import_limits.rs, feature samples in
import_fuzz.rs, shared builders in engine/tests/support/.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Strokes set to None no longer import as black 1px strokes.
- Underline and strikethrough are kept.
- Frame text starts at cap height; lines hanging out of a frame make it taller;
mixed-alignment artistic text lines up within its longest line; line breaks
inside a paragraph get no paragraph spacing.
- Table cell text taller than its cell is centred and stays visible.
- Outline effects on stroked shapes are drawn around the stroke.
- CMYK pixel layers go through the document's embedded CMYK profile; without
one, opaque layers stay CMYK.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Exporting a CMYK document to PDF/X-1a or PDF/X-3 flattens transparency
first. Where the flattener has no single colour (an image with see-through
pixels over a flat fill, gradients, masks, raster effects) it renders the
area into an image, and that image was always an RGB PNG. The PDF writer
then separated it back to CMYK, so CMYK art behind the image came back with
other inks: a C100 M6 Y41 K3 panel printed C75 M14 Y35 K5 under a
transparent logo, with a hard edge against the rest of the panel, and K
moved into C, M and Y.
For files without transparency the flattener's images are opaque and
clipped to their regions anyway, so in a CMYK document it now draws them
as ink amounts over the paper (Renderer::render_region_inks) and stores a
CMYK TIFF, which the PDF writer keeps as DeviceCMYK samples. An area too
large for a CMYK image falls back to the PNG it made before. In-app
Flatten Transparency and other flattening, whose images keep alpha, are
unchanged.
Test: tests_pdfx::pdfx_1a_flattening_keeps_the_inks_behind_an_image_in_a_cmyk_document
exports a CMYK panel under a half see-through PNG to PDF/X-1a, opens the
file again and checks the inks behind the see-through half.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
## Summary
Linux file portals grey out files that do not match the open dialog's default
filter. Other Library… and Locate Library… used File › Open filters, whose
first entry is All readable files and omits swatch-library extensions such as
.ase. Add library_open_filters with the library formats first (matching
Illustrator's Swatch Libraries › Other Library…) and use it from swatch and
graphic style library pickers.
## Tests
- engine: library_open_filters_list_library_formats_first
- ui-egui: other_swatch_library_asks_off_the_ui_thread asserts Swatch libraries
is the default filter and includes ase
Closesstorytold/vectorcraft#3465
Co-authored-by: nrq6993-a11y <nrq6993-a11y@users.noreply.github.com>
EPS, EMF, WMF and DXF exports gave each image they left out because it
couldn't be decoded its own warning, "image '<key>' could not be
decoded and was left out", which names the internal key the document
stores the image under. A version 7 .ai said "an image that can't be
decoded or is too large was left out".
The four writers now give the note raster exports, PDF and the legacy
.ai flattening give, "an image couldn't be decoded and is missing from
the picture", once per export. In a version 7 .ai it is one line with
the note for flattened art. The other image notes in the same
functions no longer name the key: EPS's note for an image too large to
write, and DXF's notes for an image with no pixels (its rows in 23
catalogs are reworded) and one that could not be written. Legacy .ai
gives a separate note for an image that is empty or too large.
Docs: docs/mcp.md (EPS, DXF export, EMF and WMF, aiVersion "7").
When the Compression settings keep a PNG as it is, the PNG goes to
the PDF writer unchanged, and the writer refuses images of 16 bits a
sample below PDF 1.5. Saving a document with a placed 16-bit PNG as
PDF 1.4, or as a .ai file at 1.4, failed with "PDF writer error:
SixteenBitImage(...)" and wrote nothing. PDF 1.3 and PDF/X-3 failed
the same way for an opaque 16-bit PNG, and PDF/X-1a failed for a
16-bit gray PNG.
In PDF 1.3 and 1.4 files, such a PNG is now decoded and encoded again
at 8 bits a sample, with the same color type and ICC profile, before
the writer reads it. From PDF 1.5 on, it keeps its 16 bits. A 16-bit
PNG whose pixel data can't be decoded is left out with the note "an
image couldn't be decoded and is missing from the picture".
Docs: docs/mcp.md (PDF options).
## Summary
Opening or placing a .pmd file now fails with a dedicated unsupported-format
hint (like DWG and PICT), telling users to export PDF or EPS from PageMaker
instead of a generic unknown-format error. document.formats lists PageMaker
in its unsupported table.
## Tests
- formats_list_dxf_and_what_can_not_be_written
- dwg_and_pict_say_what_to_use_instead (includes brochure.PMD open)
Part of storytold/vectorcraft#3343
Co-authored-by: nrq6993-a11y <nrq6993-a11y@users.noreply.github.com>
**What:** Illustrator type styled through the Appearance panel came in as its drawn look (outlined compound paths). Comic and "text effect" templates are the common case, and the type couldn't be retyped. This keeps it as editable type with the style as a live VectorCraft appearance.
**Changes**
- **Art styles parsed as a tree.** Compound filters close at their `;`, basic ones at `/Part`. Each fill and stroke in a stack keeps its own effects, opacity and blend mode, and object-level effects stay on the object.
- **Type keeps any plain stack.** That covers several fills and strokes, pattern and gradient fills, Warp, Offset Path, Transform with copies, Drop Shadow, Outer Glow, Feather, Gaussian Blur and Bas Relief. Bas Relief settings are left at their defaults, because Illustrator stores them in a Photoshop plug-in's binary block. Gradients and patterns are placed as the drawn look places them. Other objects keep the existing plain-style rule, since their drawn look is the more faithful option.
- **Point type without a frame matrix.** Illustrator 24 omits the matrix when point type is neither rotated nor scaled. Such stories were left out entirely; they're now read with an identity matrix.
- **Page comparison.** The page's rendering of a style isn't held to match VectorCraft's live rendering where the replaced drawn look lay, and styled made type isn't pruned as unseen.
- **EPS override.** `editingData: "always"` / `convert --editing-data` now applies to Illustrator EPS as well as `.ai`.
**Tests:** 6 new tests, written from scratch; `vectorcraft-eps` passes all 298 on current main. clippy `-D warnings` and rustfmt are clean for eps, engine and cli. `docs/file-format-parity.md` has been updated, including its revision history.
**Clean-room note:** I found the bugs with a user's licensed stock EPS, used locally only; nothing from it is committed. Filter and key meanings come from the public Illustrator Effect docs and public LiveEffect scripting examples (`jntp`, the Warp style order).
**Not included:** VectorCraft's pixel effects treat transparent content as empty instead of using Document Raster Effects Settings › Background (white by default). Because of that, Bas Relief on a transparent pattern gives flat grey. That needs a separate renderer change.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
craft-docpath follows a stored path only on this computer or on the
share the document is on, but its check is lexical and cannot see
mapped drives. fileio::document_path therefore followed a link stored
as Y:\img\logo.png, where Y: is mapped to \\server\other, from any
document: opening the document, links.check, Link Info and the
linked-file watch read or stamped the file on that server.
On Windows, document_path now reads the final path of the root folder
of a link's drive (std::fs::canonicalize). Windows opens that root
folder on the drive's server to answer, so the check still contacts
the server once per lookup; no file on it is read, stamped or watched.
When the final path names a share, the link is checked against the
document's path on its share, and a link on another share is refused
as on another computer, as a link stored with that share's own path
is. Links on this computer's drives and on the document's share are
followed as before, and a link on the document's own drive is not
looked up. A document opened as \\?\Z:\... is looked up on its share
as Z:\... is. Other systems are unchanged.
Docs: docs/mcp.md, docs/target-app-parity.md.
A plug-in could filter objects or reshape them as a live effect, but
nothing it made could leave the app: pen plotters, cutting machines and
laser cutters read formats VectorCraft doesn't write. An exporter is a
third kind of plug-in ("kind": "exporter", with the file "extensions"
it writes), in the same sandbox and with the same ABI v1 exports.
- It adds a write-only format, plugin.<id>. document.formats lists it
with its plug-in id, and document.export writes it by that id, or by
a path ending in one of its extensions that no built-in format has;
"params" carries its parameters, checked against its manifest as a
filter's are.
- File › Export › Export As lists it after the built-in formats, with
Use Artboards greyed out, since the plug-in writes the whole
document. One with parameters asks for them in a dialog generated
from its schema (pluginExport) once the file is picked.
- The plug-in is given the native file's JSON (format::json_part:
images of 8 KiB or more without their data) and _context {mode:
"export", extension, name}. It returns {"dataBase64", "warnings"?}
or {"error"}. The host writes the file, and nothing when the plug-in
declines or returns bad data.
- An export gets 10 G instructions plus 4,000 per byte and 300 s.
Background Export's Cancel stops it between two slices of that
budget (Error::Cancelled), and a cancelled live-effect run is not
cached as a failure.
- plugin.run and Object › Plug-ins say where an exporter is instead of
calling it a live effect.
engine/tests/plugin_export.rs reads back what an exporter is handed
with wat::echo_exporter, an exporter whose file is its input or its
parameters (its base64 encoder is written in WAT). The document it is
given is document.save's JSON, without the large image's data, and its
parameters arrive defaulted, clamped and with the file's name and
extension. It also covers listing and removal, built-in extensions
winning, selectedOnly, declines, bad base64, missing data, warnings,
and Cancel stopping a plug-in that never returns. It is a test binary
of its own: installed plug-ins are process-wide, and the format-list
unit tests check exact lists. dialogs/tests_plugin_export.rs drives
Export As headlessly; plugins/tests/abi.rs covers the budget, the
parameters and the echo exporter; format/tests/native_v4.rs covers
json_part.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HhvnnnD5fTFupK8WWq35un
Move the Preserve Editing check out of save.rs into svg.rs, where it
reads the options through `plan` as the encoder does; SaveJob::encode
still puts the warning first. Review follow-up on #2994.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A document with more than one artboard saved as SVG/SVGZ without
Preserve Editing Capabilities is written as one artboard and reopens
with one, so the others were lost without a word. The save now says so
(first, since the status bar shows only the first warning) and names the
two ways to keep them all.
Refs storytold/vectorcraft#2091
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A CMYK JPEG came out with JFIF's APP0 segment at its head and four components
in the frame:
APP0/JFIF APP14/Adobe APP2[ICC_PROFILE 1/4 … 4/4] SOF0: 4 components
JFIF describes one- and three-component images, greyscale and YCbCr, so an APP0
segment in front of a four-component frame says two different things about the
file's colours: a reader that trusts JFIF decodes nonsense, and one that checks
refuses the file. Adobe's own CMYK JPEGs carry the APP14 marker the encoder
already writes, and no JFIF. `jpeg-encoder` writes JFIF unconditionally, so the
segment is replaced here.
The resolution JFIF carried moves to an EXIF APP1 segment -- `XResolution`,
`YResolution` and `ResolutionUnit` -- which is where `cmd::fileio::ppi` already
looks when a file has no JFIF, so nothing is lost; with no resolution asked for
the segment is simply dropped. RGB and greyscale files keep JFIF, which is what
it is for.
Found while looking at #3084, whose default RGB exports are valid here; this is
the file that is not.
Honor the requested text mode in the single-page importer, as Open does, instead of forcing outlines for Place and PDF clipboard import.
Add synthetic regressions for bytes, unlinked paths, selected pages and explicit outlines. Update format parity and milestone evidence without changing scores.
document.pdfInfo read thumbnail with as_u64, so a value such as -1,
1.5, "1" or true gave a reply without a thumbnail and no error. This
happened for a PDF and for a PostScript file.
A thumbnail that is present and not null must now be a whole number
from 1 to the page count. Any other value is the existing "thumbnail:
no page {n} (the PDF has {count})" error, or "(the file has 1)" for
PostScript, with the value as given. An absent or null thumbnail still
gives no thumbnail.
PNG, PDF, EPS, legacy `.ai`, packaged zips and saved `.vectorcraft` files
record the wall-clock time they were made in, so the same commands run twice
gave different bytes although the pixels matched (#2880):
PDF /CreationDate and /ModDate D:20261018155816 vs D:20261018155817
PNG the `Creation Time` tEXt entry
.vectorcraft one byte of the stored date
SVG carries no time, and already repeated
`metadata::output_time` is the time a file records: `SOURCE_DATE_EPOCH` when it
holds a non-negative whole number of seconds, else the clock, as the
reproducible-builds specification defines it. A date a command is given
(`file.new {created}`, a save's `modified`) still wins over the variable, and a
blank, negative or non-numeric value is ignored so that an export is never
refused over the environment.
`metadata::now_unix` keeps the real clock and now has exactly two callers, both
of which must not be pinnable from the environment: the recovery heartbeat, and
the seed PDF encryption draws on.
A .ai saved without PDF compatibility has only a placeholder page in
its PDF part. document.open reads such a file from its editing data,
but with `pages` given it failed with "the file holds only a
placeholder page", even for "1" on a file of one page.
When `pages` names every page of the file, document.open now reads
the editing data as it does without `pages`.
Docs: docs/mcp.md.
A PDF or PDF-compatible .ai saved with Preserve Editing carries the
native document as an embedded file, with a hash of its pages at the
end of the file's /Desc. The import read /Desc with from_utf8_lossy and
looked for "hash ". /Desc is a PDF text string, which may be written as
UTF-16BE with a byte order mark (ISO 32000-1 7.9.2.2). Written that
way it holds no UTF-8 "hash ", so the import found no hash, took the
editing data as intact and reopened the native document with no
warning, even after another app had changed the pages.
/Desc is now read with text_string, the importer's decoder for text
strings, so the hash is found in UTF-16BE, UTF-8 and PDFDocEncoding.
Changed pages open as artwork with the "changed in another app"
warning. The embedded file's /UF and /F names are decoded the same
way, so editing data named only in UTF-16BE is found.
A /Desc without a hash is still trusted, as before.
craft-docpath follows a network path only on the share the document is
on, and its caller contract asks for a document opened from a mapped
drive to be passed by its UNC path. fileio::document_path passed the
drive path as given, so a document opened as Z:\jobs\doc.vectorcraft
treated a link stored as \\server\share\img\logo.png, on the share
behind Z:, as on another computer: the image was missing, and
document.open, links.check and links.info gave refused: "the path is on
another computer".
On Windows, when a stored path is refused as on another computer and
the document is on a drive, document_path now reads the final path of
the document's folder (std::fs::canonicalize). When that names a share
(\\?\UNC\server\share\...), the path is checked again against the
document's path on that share. Links on other computers stay refused,
and paths that were followed resolve as before. Opening a document,
Link Info, links.check and the linked-file watch all use it. Other
systems are unchanged.
Docs: docs/mcp.md, docs/target-app-parity.md.
document.pdfInfo refused PostScript (an EPS, a .ps file, or a .ai in
PostScript form), mostly with "this is a PostScript file ..., not a
PDF", although document.open and file.place read the same file
through the EPS reader as one page.
It now answers {pages: 1, needsPassword: false, pageInfo: [{width,
height, rotation: 0, boxes: {}}]}. The page is the file's bounding box
(%%HiResBoundingBox when it has one, a US Letter page without one),
read from its comments without running its program. thumbnail: 1 is a
PNG of what that page prints, read by the EPS reader without any
editing data the file carries. A program whose header is only %! is
read as PostScript, as clipboard.importEps reads it.
Docs: docs/mcp.md, docs/target-app-parity.md.
The PostScript interpreter that reads EPS and PostScript .ai files
accepts a FlateDecode or LZWDecode filter with Predictor 2 at
BitsPerComponent 1, 2, 4, 8 and 16, but undid the horizontal
differencing only at 8 bits. At the other depths the filter gave back
the stored differences, and the image drew them instead of its
samples.
The predictor is now undone at every depth it accepts, as ISO 32000-1
§7.4.4.4 describes: each component adds the same component of the
pixel to its left, within its bit width, and each row starts again.
16-bit components add as big-endian 16-bit numbers. The padding bits
at the end of a row stay as they are, and 8-bit data takes the same
path as before. The PNG predictors are unchanged.
Docs: docs/target-app-parity.md.
While an export runs in the background (Background Export), a dialog shows
what is being exported and how far it has got: artboard by artboard for a
raster export of several artboards, busy otherwise. Cancel (also Esc) stops
it and writes no file; Continue in Background leaves it to the status bar.
It opens after 0.4 s and never over another dialog.
Built on the shared vectorcraft_doc::cancel (#2546): fileio::progress::Progress
wraps its CancelToken and a progress sink, so a cancelled export stops
drawing and keeps no half-drawn pattern tile or effect raster.
- ui: background jobs carry their Progress; export_progress draws the
dialog; UI commands file.cancelExport and file.exportInBackground.
- i18n: the strings in every language with complete menus, Danish, Dutch
and Indonesian included; "{n} more exports waiting" is a plural (trn).
- docs: ui-parity, gaps (G12) and ROADMAP rows.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Dt49z1ubK9x1bPq51APgz3
A .ai can keep its variables and data sets in a variable library in
its editing data. VectorCraft doesn't read that library, and such a
file opened with an empty Variables panel and no warning about it.
The reader now counts the library's variables and data sets in the
editing data's /Document dictionary, and opening the file adds a
warning: "the file's variables and data sets weren't read (2
variables, 3 data sets): the Variables panel doesn't list them". The
same warning appears when the layers can't be read and the file opens
from its PDF part. A PDF that opens from the editing data it carries
gets the warning too. A library with no variables and no data sets
gives no warning.
Docs: docs/target-app-parity.md.
The Export for Screens dialog built its Example line from its fields as
typed, so it often showed a name the export does not write. It used the
artboard's name with its spaces (Artboard 1.png where the export writes
Artboard-1.png) and the first artboard whatever the range, kept a
prefix, a suffix or a device name such as CON as typed, used the scale
text as the row folder instead of the row's own folder or its size,
kept a vector row's @2x suffix, left out the folder that Create
Sub-folders adds, and read a counter set as text as 1.
The line now comes from the export's own naming. The naming part of
document.exportForScreens moves into a Naming type that the export
uses for every file, and fileio::screen_first_file returns the path of
the first file the export writes for the given params, without encoding
or writing anything. The dialog passes it the params it exports with,
without the destination, so the line shows before a folder is chosen
and is left out while the settings choose nothing to export. The Start
at field shows the counter the export uses when it was set as text.
Docs: docs/target-app-parity.md.
The engine built the PDF options without a creation date, so the
writer dated every PDF and PDF-compatible .ai file with the time it
was written. A document created on 2020-01-01 (File › File Info
shows the date) exported as a PDF with today's date in /CreationDate
and xmp:CreateDate. SVG export with the metadata option already
writes the document's own date.
The options now carry the document's File Info created date and the
time of writing as the modification date. A document without a
creation date is dated with the time of writing, as before, so PDF/X
files still get their required date. The PDF writer writes one date
for both, so the export then sets /ModDate, xmp:ModifyDate and the
PDF/A history dates to the time of writing; /CreationDate and
xmp:CreateDate keep the document's date. The page information mark
and the embedded editing data's modification date keep the time of
writing.
Docs: docs/mcp.md (File Info), docs/target-app-parity.md.
file.saveAsTemplate with format ait and aiVersion: "7" wrote the
legacy PostScript .ai of version 7 under the .ait name: for a
one-artboard test document, a 7,556-byte file starting %!PS-Adobe-3.0.
The web's Save as Template dialog showed the .ai Version menu for
.ait, whose Legacy (version 7) choice set aiVersion 7.
aiVersion 7 for a .ait is now an error, "aiVersion 7 writes legacy .ai
files; a .ait template is always PDF-compatible", and nothing is
written. The 17 catalogs that translate every message have a row for
it. The dialog shows no Version row for .ait, and aiVersion "pdf"
still writes the PDF-compatible template.
Docs: docs/mcp.md, docs/target-app-parity.md, docs/file-format-parity.md
(two stale rows for .ai and .ait removed).
document.export, document.serialize, document.exportSelection and
Export for Screens rows answered "PDF-compatible .ait template files
can be opened but not written" for a .ait, although
file.saveAsTemplate writes them. The CLI's convert and run --export
call document.export, so vectorcraft-cli convert in.pdf out.ait
failed with that error.
The error now reads "PDF-compatible .ait template files are written
by file.saveAsTemplate", with a row in the 17 catalogs that translate
status messages and in bg, da, id and nl. convert and run --export
write a .ait with file.saveAsTemplate, which writes every artboard
with the .ai options. convert passes --replace-lossy and its .ai flags
on, and refuses --artboard and --range for a .ait.
Docs: docs/mcp.md, docs/target-app-parity.md.
When the PDF writer keeps a PNG, GIF or WebP image as it is, it accepts
the image once its header reads, and it reports pixel data that it
can't decode only when it finishes the file. An image whose pixel data
was cut short or damaged therefore failed the whole export with "PDF
writer error: Image(...)", and nothing was written. This happened in
Save as PDF, .ai saves, Save a Copy, Print, Export for Screens and
native files with PDF compatibility, and with On Copy: PDF turned on,
Copy left the PDF off the clipboard.
When the writer fails on an image's pixel data, the export now runs
again with that image left out. Its warnings hold the note that raster
exports give, once: "an image couldn't be decoded and is missing from
the picture". This note replaces the writer's "image '<key>' could not
be decoded and was skipped", which named the image by an internal key.
An export without such an image runs once, as before. A .ai file keeps
the image in its editing data and reopens with it.
Docs: docs/mcp.md (PDF options).
Saving a version 7 .ai expands raster effects into images and flattens
images with see-through pixels, opacity or a blending mode, and both
draw the art with the renderer. An image the renderer couldn't decode
drew nothing, so it was missing from the result, and the reply carried
no note. A semi-transparent image cut short was removed without one.
The save now compares decode_failures() before and after it writes the
artboards, as Expand Appearance and the raster exports do, and adds
"an image couldn't be decoded and is missing from the picture" to its
warnings once.
Docs: docs/mcp.md (aiVersion "7").
A PDF-compatible .ai, or a PDF saved with the editing data, whose
editing data can't be decompressed (damaged zlib or Zstandard data, or
data that decompresses to more than 256 MB) opened from its PDF part
with no note about its layers. layered_ai returned on the
decompression error without a note. Data that decompresses to layers
that can't be read gets one, and so does an EPS.
layered_ai now gives the same note with the decompression error as
its reason: "the file's layers weren't read from its editing data (its
zlib compression is damaged): they come from its PDF part". The note
counts as a loss, so document.export or Save As over a PDF saved with
the editing data asks first (acknowledgeLoss), as it already did for
a .ai. The three reasons have rows in the 17 catalogs that translate
every message.
Docs: docs/mcp.md, docs/target-app-parity.md.
The layers of PDF and PDF-compatible .ai files come from their
optional content groups, whose /Name is a PDF text string. The import
read a name without a byte order mark as Latin-1. Such a string is
PDFDocEncoding (ISO 32000-1 Annex D, Table D.2), which differs from
Latin-1 at 0x18 to 0x1F and 0x80 to 0xA0. A group named
(Art\205final) opened as a layer named "Art", U+0085, "final" instead
of "Art–final", and curly double quotes (0x8D, 0x8E) and the euro sign
(0xA0) became control characters and a no-break space.
text_string now reads such a string with the PDFDocEncoding table that
File Info already used for the document information dictionary. The
table moves from file_info.rs to import_scan.rs, and File Info reads
the information dictionary's strings with text_string.
Save for Office Documents, the pictures that css.export rasterizes and
the PNG and PDF that Copy offers other apps were encoded with
fileio::encode, which drops the encoder's warnings. When the art held
an image that the renderer could not decode, the PNGs lacked it; type
in a font that is not installed came out in the fallback font in the
Office PNG and Copy's PNG and PDF. No reply or status message said so.
The app also dropped the warnings that document.exportSelection
returns.
document.exportForOffice, clipboard.exportPng and clipboard.exportPdf
now return `warnings`, and css.export adds the notes of its pictures to
its `warnings`, each once. Save for Office Documents and
document.exportSelection show the first note in the status bar in Save
As's message, and the CSS Properties panel's Export Selected CSS… and
Export All… show it in Export As's message. After Copy or Cut, once
the PNG and PDF are on the system clipboard, the status bar shows their
first note. The files are written as before.
Docs: docs/mcp.md (Clipboard, CSS Properties), docs/control-protocol.md.
Mirko Kerezovic