A drag with Space and Shift held panned the view, as a Space drag does.
With Space and Shift held and Cmd up, a drag on the canvas now turns
the view about the canvas center, as a Rotate View tool drag does,
whatever the tool. Shift does not round the angle to 15° as it does
with the Rotate View tool, and the drag keeps turning the view when
Shift is let go. Space alone still pans, and Cmd+Space still zooms
with or without Shift. The pointer shows the rotate cursor while Space
and Shift are held without Cmd, and during the drag. The Rotate View
tool also shows it now, where it showed the arrow.
Docs: docs/target-app-parity.md.
In Presentation Mode the canvas showed the active tool's cursor, a
right click selected the object under the pointer and opened the
context menu, and every key other than the arrows and Escape worked as
in Normal Screen Mode: tool keys, Delete, Enter, Tab, F and the
command shortcuts. A two-finger tap undid. With a tool that claims
Escape, such as the Intertwine tool, Escape did not leave the mode.
In the mode only the Escape, Left Arrow and Right Arrow keys now act,
and Escape leaves the mode whatever the tool. Every other key press,
the text it types and the clipboard keys are dropped before any
shortcut reads them, the macOS menu bar's key equivalents included. A
right click or a long touch opens no context menu, a two- or
three-finger tap undoes or redoes nothing, and the pointer over the
canvas is the default one. F and Shift+F no longer leave the mode;
Escape does.
Docs: docs/target-app-parity.md.
In the Links panel, Shift-click and Cmd/Ctrl-click both added or
removed the image of the one row clicked. Shift-click now selects the
images of every row from the last row clicked without Shift to the
clicked one, in the order the panel shows them (its Show filter and
Sort order), and Cmd/Ctrl-Shift-click adds them to the selection.
Cmd/Ctrl-click still adds or removes one image, a plain click selects
one, and a double-click still goes to the link. When the last row
clicked is not shown, or the last click was in another document,
Shift-click acts as a click without Shift.
A click on a row runs select.set, select.add or select.toggle, and the
range is worked out as in the Layers panel's Shift-click.
Docs: docs/target-app-parity.md.
In the Graphic Styles panel, Shift-click and Cmd/Ctrl-click both added
or removed the one style clicked. Shift-click now adds to the selection
every style from the last one clicked without Shift through the
clicked one, in the order the panel lists them, and Cmd/Ctrl-click
still adds or removes one. A plain click applies the style and selects
it alone, Alt-click still adds it on top, and the Control bar's Style
picker still applies on every click.
The panel uses swatches::click_selection, as the Swatches panel and
the library panel do.
Docs: docs/target-app-parity.md.
A plain click on an item in the library panel selected the item but did
not record it as the anchor that a Shift-click ranges from. A later
Shift-click then selected only the clicked item, or ranged from an
older anchor set by an earlier Cmd/Ctrl-click or folder click. This
applied to swatch libraries and graphic style libraries.
Every click on an item or folder now goes through click_selection, as
in the Swatches panel. A plain click still selects the item alone and
adds and applies it.
PDF import reads a gap wider than a fifth of an em between two glyphs
as a space, and a space that the line's tracking cannot place gets
tracking of its own. That tracking was clamped to 1000 thousandths of
an em, while type takes tracking from -1000 to 10000. A gap wider than
an em plus the width of a space came in short by the excess, so the
words after it sat to the left of where the file put them, and each
further wide gap added to the shift.
The tracking that import sets for such a space, and for the line around
it, now has the same range as type's.
Expand had nothing for Intertwine groups. It reported success but left
the group live (it only dropped the members' live shapes), and its
Stroke and Fill options could not reach the members, so a second Expand
found nothing to do. Ungroup takes apart plain groups only, so it did
nothing either.
Expand's Object option now turns every Intertwine group in the selection
(inside groups too, inner ones first) into a plain group of what it
draws: its objects, keeping their ids and order, then each part drawn
over the others as a clip group. The group keeps its id, place,
transparency and appearance, everything happens in one undo step, and
the dialog enables Object for an Intertwine group. Ungroup then takes
the result apart, as with an expanded blend or repeat.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
gradient_chip now takes the GradientPaint and lays the gradient out as it would be on an object of the chip's shape: linear along its angle, radial from the centre, freeform from its colour points. Gradient panel swatch menu and the Swatch Options dialog carry the full paint.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The shared dock left its pane and tab strip backgrounds transparent because the docked card behind them is filled. Floating groups lie on the canvas, so the canvas showed through. They now paint the panel colour, which is what the card shows when docked.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Reverts the fallback that merged the layers of art selected on the canvas when no
layer row is highlighted: Illustrator's Merge Selected merges the highlighted rows
into the last one highlighted.
With no highlighted rows and art selected in two or more layers (Select All), layer.merge merges those layers; the panel menu enables it then.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Multiply squared a colour overprinting itself (stroke over same-colour fill showed a darker band). Darken keeps the stronger ink per plate/channel.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
sRGB to Generic CMYK applies black-point compensation (black separates to the
darkest rich black) but CMYK to display did not undo it, so hex 000000 became
C67 M67 Y67 K100 and then showed as #1b1818. The display XYZ now maps the press
black to black when the colour settings use black-point compensation, in the
sRGB conversion, the ink lookup table the canvas uses, Lab of a CMYK colour and
the gamut warning.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The overflow marker was drawn by the Type tools only, so with the Selection tool a text box smaller than its text showed no sign that text was hidden. Session::overlays now adds the marker of every selected area type and type on a path that overflows, unless a Type tool is active (it draws its own). The verdict is cached per object and font generation.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The language the UI is drawn in was one process-wide value in unit
tests too, and the tests run on parallel threads.
current_language_is_a_frame_setting sets Traditional Chinese for a
moment, and a test that drew text in that moment read it in Chinese.
chrome::tests::the_zoom_hint_follows_animated_zoom failed that way in
29 of 500 runs together with the i18n tests.
The drawing language is now one per process in the app and one per
thread in unit tests, as ui_mirror! keeps the shortcut and workspace
mirrors. The app keeps the same static. A new test sets the language
on another thread and checks that its own thread still draws in
English.
On main, cargo xtask wasm printed an unused-import warning for json in
crates/engine/src/cmd/fileio/action_batch.rs, and this check reported
it as an error:
RUSTFLAGS=-Dwarnings cargo check -p vectorcraft-engine --target wasm32-unknown-unknown
Every use of json! in action_batch.rs is in code compiled only for
native targets. The wasm32 version of action_batch uses Value only.
The json import now has the same #[cfg(not(target_arch = "wasm32"))]
attribute as the code that uses it. Native builds import the same
names as before.
Found while testing crates/doc/src/xml_id.rs:31 (from_object_name) / :10 (to_object_name)
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Found while testing crates/engine/src/cmd/graph.rs:193 (fmt_value)
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
document.rasterEffectsSettings accepts addAround from 0 to 1,000 pt,
but a file's raster_effects.addAround opened as it was saved. With
addAround 1e300, the area of a raster effect image overflowed f64,
the image scale became 0 and the image got the transform
[inf, NaN, NaN, inf, x, y]. PDF export left that image out, so the
drop shadow was missing.
A file's addAround now opens clamped to 0 to 1,000 pt. An effect
image whose area or scale is not finite is not made. Export then
keeps the object with its effects, and Expand Appearance expands it
without an image, as when its PNG can't be encoded.
Docs: docs/mcp.md (addAround).
Crop Image's trim (object.cropImage {trim: true}) decoded the image
within MAX_RASTER_ALLOC (2 GB) and then converted it to RGBA. The
decoder holds the decoded image, before conversion, to that allowance,
so a gray or 1-bit image within it could take up to four times as much
once converted.
Trim now reads the image's size from its header first and, when
width × height × 4 is over the allowance, fails before anything is
decoded, with the check and message Load Texture uses: "an image of
W × H pixels is too large to draw". Images within the allowance are
trimmed as before.
Before the Eyedropper samples an image, or Edit Colors, Recolor Artwork
or a color adjustment effect recolors an embedded one, `rgba_within` reads
the image's size from its header and checks its size as RGBA against the
allowance. The check multiplied width × height × 4 in 64 bits. A TIFF's
sides go up to 2^32 - 1 pixels, so a header of 2^31 × 2^31 pixels
overflowed that product: debug and test builds panicked with "attempt to
multiply with overflow", and release builds wrapped it to 0 before the
decoder's own 512 MB limit refused the image.
The check now compares width × height with the allowance divided by 4.
Every size whose RGBA bytes fit in 64 bits gets the same answer as
before, and a larger one is refused.
A raster export compared the process-wide count of images that could
not be decoded before and after it drew, and warned that "an image
couldn't be decoded and is missing from the picture" when the count
rose. Any other thread that failed to decode an image in that time
raised the count too: a second export, the UI thread drawing the
canvas, or the canvas, thumbnail and placed-document workers drawing a
document with such an image. The export then warned about an image it
does not contain. In the engine's tests,
options_not_applied_yet_and_document_features_warn failed in 5 of 60
runs of the tests_raster and tests_pdf* tests.
The count is now kept per thread. An export reads it on the thread it
draws on. That thread decodes every image the export draws that is not
already in the shared image store, and an image that failed to decode
is never stored.
The renderer decoded each image within its 2 GB allowance (512 MB in
the web build) and then converted it to RGBA. The decoder holds the
decoded image, before conversion, to that allowance, so an image stored
with fewer than four bytes a pixel (gray, 1-bit, gray with alpha, or
RGB without alpha) could take up to four times as much (4/3 times for
RGB) once converted, and as much again as the pixmap drawn from it.
The renderer now reads the image's size from its header first. When
width × height × 4 is over the allowance it does not decode the image
and handles it as one it can't decode: the renderer draws nothing for
it, and a raster export warns that an image is missing. Images within
the allowance are decoded and drawn as before.
Node editing as the public manual describes it: Direct Selection's anchor squares (hollow
or filled), Reshape Segment over a curved segment, Group Selection's plus (also Direct
Selection with Alt), the arrow hollow while a drag snaps, and Alt-copy arrowheads. The
Anchor Point caret, the Curvature pen and Free Transform's side-shear arrows (ShearH,
ShearV) are drawn in code. Lasso, the freehand, symbolism and other tools return cursors
of their own that borrow their old look until drawn (Cursor::stand_in).
crates/tools/src/cursors.toml lists every Cursor value, when it shows and its hotspot,
for whoever draws them; `cargo xtask cursors` (in ci) warns about a missing, unknown,
repeated or incomplete entry and never fails. The busy cursor is listed as missing (G1).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Complete catalogs for nl, da and id, registered with their locales. Hindi from the same PR waits for a Devanagari UI font decision (with Lao and Georgian), and the strings main gained since the catalogs were written are added.
With View › Hide Edges on, the canvas does not draw the bounding box,
the type widget beside it or the Live Corners widgets, but the
selection tools still answered the pointer on them. A press on a hidden
corner widget rounded the corners, a drag from a hidden handle scaled
the selection, a double-click on the hidden type widget converted the
type, and the cursor changed over each of them.
While edges are hidden, the app now tells the tools that the bounding
box and the corner widgets are off. A press at their places reaches the
art or the canvas under them.
Docs: docs/target-app-parity.md.
View › Guides › Release Guides only cleared the guide flag on paths
made with Make Guides. Ruler guides could not become paths by any
route, and with only ruler guides selected the command released every
guide path in the document instead.
Release Guides now also releases the selected ruler guides. Each one
becomes an open straight path with no fill or stroke at the top of the
guide's layer: an artboard guide runs across its artboard, and a
canvas guide runs across the bounds of all the artboards. The ruler
guide is deleted, the released paths are selected, and the release is
one undo step. With no guide selected, every guide path is released,
as before.
view.guides.release takes index (a ruler guide) and ids (guide paths,
and the guide paths inside them). Both are refused while guides are
locked, and index takes only a guide on a shown, unlocked layer.
Docs: docs/mcp.md, docs/target-app-parity.md.
#1320 (write) and #1318 (read) landed on main; this keeps only the missing
regression: explicitly closed control-point splines export with the closed
bit and re-import closed, while open paths (even with coincident endpoints)
stay open, across every SPLINE-capable DXF version.
Issue #1935 asks for batch exports of many logo variations in many
formats, each format in its own folder. This builds on Export for
Screens, which already writes every chosen artboard in every format row.
Names: a file name pattern (`name`) names every file alike. Tokens:
<filename> (the document), <name> (the artboard, asset, layer or
object), <index>, a run of # (a counter, zero-padded to the run's
length, from counterStart; counterPer item or file), YYYYMMDD,
YYYY-MM-DD, <date>, <time>, <YYYY>, <MM>, <DD>, <format>, <scale> and
<suffix>. A trailing .ext is dropped. Words are not changed: only the
date patterns and the bracketed tokens are. `date` sets the day (the
default is today, UTC). Different files that a pattern names alike get
-2, -3... Without a pattern, two rows with one name still write the
first row only, as before.
Folders: `folders` puts all files in one folder, a folder per row (as
Create Sub-folders did), per extension, per item, or per item and then
extension.
What is exported: besides artboards, assets and the full document,
`layers` (each layer's art alone, sublayers included) and `selection`
(one file of the selection, or a file per object).
Formats: rows can also be EPS, AI and VectorCraft (a document of the
item alone, its one artboard). A PDF row with printer's marks (PDF
Print in the dialog: trim, registration, colour bars, page information,
suffix -print) sits next to a plain PDF row.
Presets: document.exportPresets.list, .save and .delete keep batch
export presets with the preferences, and `exportPreset` uses one under
the call's own params. Built-in: Logo Package (SVG, PNG 1x and 2x, PDF
and print PDF, a folder per format) and Print-Ready PDF.
Dialog: Layers and Selection tabs with thumbnails; an Export Preset
menu with Save and Delete; Folders; File Name with Insert for the
tokens, Start at, Prefix, and an example of the first file's name. The
OK button says Export Layer or Export Selection on those tabs.
Tests: the pattern tokens, the request's example (SVG, PNG, PDF and
print PDF for artboards 1-3, a folder per extension, the print PDF a
bigger page), folders by item and both, the counter by item and by
file, numbered duplicates, layers and the selection, EPS, AI and
VectorCraft per artboard, presets (built-in, saved, used, replaced,
deleted, kept with the preferences), bad params, and the dialog (every
tab, the example name, a pattern export into folders, the Layers and
Selection tabs, presets applied and saved). The three tests that
refused EPS and VectorCraft rows now check those files. New labels
are translated in all 19 catalogs.
The Paragraph panel menu's Hyphenation… was always disabled, and
automatic hyphenation used fixed limits: words of 6 letters or more,
3 letters on each side of the hyphen, any number of hyphenated lines
in a row, and capitalized words hyphenated.
Each paragraph now has hyphenation options: Words Longer Than, After
First, Before Last, Hyphen Limit, Hyphenation Zone and Hyphenate
Capitalized Words. The defaults are the fixed limits, and documents
keep their line breaks. The options are saved only when they differ
from the defaults. text.setFormat takes wordsLongerThan, afterFirst,
beforeLast, hyphenLimit, hyphenationZone and hyphenateCapitalized, and
paragraph styles carry the options. Hyphen Limit applies with both
composers. Hyphenation Zone applies with the Single-line Composer: a
line whose text before the next word already ends within the zone
breaks before that word instead of hyphenating it.
Hyphenation… is enabled with type selected and opens a Hyphenation
dialog (ui.hyphenation) on the values the Paragraph panel shows. OK
runs text.setFormat with the values that changed, as one undo step.
Docs: docs/mcp.md, docs/target-app-parity.md.
A double-click on an object or group fits one artboard to the visible bounds and does not open Artboard Options. The second click does not fit another artboard. Other artboards stay. Double-clicking empty artboard space still opens Artboard Options. Double-clicking the name drawn above an artboard renames it.
The Stroke panel enables Align Stroke while the Type tool edits text, and
styles the selected characters. docs: mcp.md (stroke.set and strokeOptions
align on type), type-parity and target-app-parity rows.
The characters' stroke takes Align Stroke like an object stroke: CharStyle
keeps stroke_align (written only when not centred), stroke.set and
text.setRangeStyle strokeOptions apply align to type, and the Stroke panel
enables the buttons for type. Canvas, PDF and EPS draw it around the glyphs
through stroke_layer(); SVG keeps the text live and writes the aligned
stroke on the glyph outlines, clipped or masked. Type's visual bounds grow
with its character strokes.
Area type and type on a path whose text doesn't fit print without the
text past the end of the frame. text.create, text.createInPath,
text.setText and text.setStyle report it in their replies, but
file.print and print.preview gave no warning, and the Print dialog's
Summary showed none.
Both commands now add a warning that counts the area type and type on
a path that prints and doesn't fit, and gives their ids (the first 20,
then how many more). It counts the objects that the fallback font
warning counts: visible objects on the layers that Print Layers picks,
on the paper of the artboards or tiles that print. The walk that finds
the fonts of the printed type also collects these ids. Type in the art
of symbols, patterns, brushes, opacity masks and placed documents is
not named.
Docs: docs/mcp.md (Print, Fitting area type), docs/target-app-parity.md
(Type).
dotCooCoo