Step 3 of the Rectangular Grid tool and Arc tool help pages
(https://helpx.adobe.com/illustrator/using/tool-techniques/rectangular-grid-tool.html,
https://helpx.adobe.com/illustrator/using/tool-techniques/arc-tool.html)
and the Tools page (https://helpx.adobe.com/illustrator/using/tools.html)
say a double-click on the tool opens its Tool Options. For these four tools
the double-click (tool.options, and Enter once #2891 lands) said the tool
had no options (#2691).
The Tool Options are the tool's click dialog in dialogs/shapes.rs, opened
without a place to draw (shapes::open_options; a `__toolOptions` field
marks it), as the review of #2979 asked: no copied form code. Its OK runs
tool.setOption and draws nothing; Cancel changes nothing. The grids' dialogs
are titled Rectangular Grid / Polar Grid Tool Options there. The options
are what the next drag draws with and what a click's dialog opens at:
- Line Segment: Length and Angle (now kept by the tool and used by the
click dialog) and Fill Line (new: shape.line {fill: true} gives the line
the current fill; the click dialog has it too);
- Arc: lengths, Reference Point, Type, Base Along, Slope, Fill Arc;
- the grids: dividers, skews and switches, plus the Default Size and
Reference Point, now kept by the tool (width, height, reference) for the
click dialog; a drag leaves them out of its command.
The grids' Reference Point is drawn only as the 9-point locator (it also
showed as a plain number field).
New strings (Rectangular Grid Tool Options, Polar Grid Tool Options, Fill
Line) have rows in all 24 catalogs.
Verification:
toolbar::tests::double_clicking_the_line_arc_and_grid_tools_opens_their_tool_options
double-clicks each tool's toolbar button: the dialog and its title, Cancel
leaves the next drag as it was, OK draws nothing, the next drag uses the
option and a click's dialog opens at it (a grid at its Default Size);
line_segment_options_and_fill_line, grid_default_size_is_an_option_the_drag_leaves_out,
fill_line_gives_a_new_line_the_current_fill. Grid dialog tests now expect
the stored Default Size. Live: double-clicking the Rectangular Grid tool in
the release build opens Rectangular Grid Tool Options; OK with 2 and 3
dividers, then a drag, draws a 3 × 4 grid.
Holding Alt while drawing with the Paintbrush, or with the Pencil while
Alt key toggles to Smooth Tool is off, closes the path at the release,
but the cursor did not change. The reference app's Paintbrush shows a
small loop while Alt is held, and its Pencil shows a small circle.
Cursor::PaintbrushClose and Cursor::PencilClose show while Alt is held
with the Paintbrush, and with the Pencil while that option is off,
before the press and while drawing. Both tools still borrow the
crosshair, so the closing cursors are drawn as that crosshair with the
PenClose ring. Use Precise Cursors turns them into the plain crosshair,
as it does PenClose.
With Alt key toggles to Smooth Tool on, the Pencil shows the Smooth
cursor while Alt would smooth: with Alt held before a stroke begins to
draw, and through a smoothing drag even after Alt is let go. Before, it
showed the Smooth cursor whenever Alt was held, also during a stroke
that kept drawing, and not during a smoothing drag once Alt was let go.
Docs: docs/target-app-parity.md, crates/tools/src/cursors.toml.
A Blob Brush stroke followed the pointer whatever modifier keys were
held. The reference app's shortcut list has Shift constrain the Blob
Brush path horizontally or vertically.
With Shift held during a drag, each point of a Blob Brush stroke now
goes on the horizontal or vertical line through the press point that
is nearer in angle to the pointer, at 90-degree steps from the
Constrain Angle preference, and keeps its distance from the press
point. When the pointer crosses to the other line, the points dragged
since Shift went down move to it, each on its own side of the press
point. Each point reads the Shift state of its own event, so the
points dragged while Shift is up follow the pointer. The stroke still
runs path.blob once on release.
Docs: docs/target-app-parity.md.
docs/control-protocol.md and the tool.options params text say that 0
turns the Pencil and Paintbrush options Edit selected paths within and
Close paths when ends are within off. A stroke that
started exactly on an end of a selected open path still continued that
path at 0, and a stroke that ended exactly where it started was still
closed at 0, because both checks compared the distance with <= 0.
At 0, a stroke that starts on an end of a selected open path now draws
a new path, as one that starts on the path away from its ends already
did, and a stroke that ends where it started stays open.
Docs: docs/target-app-parity.md.
Measurement labels while drawing now match the Measure tool (D, angle, dX/dY) when the preference is on.
Co-authored-by: Cursor <cursoragent@cursor.com>
With the Anchor Point tool, a drag from an anchor pulls out smooth handles.
Shift held at the press now moves the anchor instead, its handles keeping
their offsets; Shift kept down during the drag keeps the move at 45° steps
(the constrain angle), released it frees it. A Shift-click that doesn't
move leaves the anchor as it was. A selected blend's spine points follow
the same rule (object.blend.spine.moveAnchor).
The move goes through a new engine command, path.moveAnchor
{id, subpath?, anchor, x, y}, since path.moveAnchors only acts on the
direct-selected anchors and the Anchor Point tool keeps no anchor selection.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
path.freehand takes redraw: {id, within}: the stroke's ends are placed on the path, anchors added there, and the section between them replaced by the fitted stroke, the shorter way round a closed subpath; a stroke that doesn't end on the path still draws a new one. The Pencil and Paintbrush send it for a stroke that starts on a selected path's outline away from its ends, within Edit Selected Paths' distance.
A Shaper Group keeps its original shapes as its first child, at no
opacity, and clicks do not pick them outside Construction mode. The
Lasso, the Add Anchor Point, Delete Anchor Point, Anchor Point and
Scissors tools still picked their anchor points and segments, also
where the group erased the face, and Smart Guides, Snap to Point and
the transform tools' reference point snapped to them. The Lasso and
the anchor tools also picked art outside the isolated group or object
in isolation mode.
The Lasso and the anchor tools now visit only the art a click can pick:
the isolated object in isolation mode, and a Shaper Group without its
original shapes unless they are isolated (Construction mode). Smart
Guides and Snap to Point leave the original shapes out of their
targets, and Spacing Guides leave out their bounds when a face moves.
The transform tools' reference point snaps to an original shape only
when that shape is selected, or under the pointer in Construction
mode. The Shaper Group test document moves into the shared test
helpers.
Docs: docs/shaper.md, docs/target-app-parity.md.
- Prefer the anchor over a short handle within tolerance, like hit_handle.
- Pick the nearest eligible spine point and handle.
- Constrain Shift handle drags to 45-degree steps round the anchor.
- Hide spine handles with handles_multiple off, in overlays and picking.
Shift pressed while dragging a segment had no effect on the curve:
Direct Selection's curved-segment and spine-segment drags, the Anchor
Point tool and the Pen with Alt sent the pointer offset alone, and the
segment bent freely. The reference app keeps the handles in the
perpendicular direction and of equal length while Shift is held.
path.reshapeSegment and object.blend.spine.reshapeSegment take
perpendicular (default false, which keeps today's behavior). With it,
both of the segment's handles stand at right angles to the line between
its anchors, on the same side and at the same length, and the point at
t lies as far from that line as the moved point does. A smooth anchor
at either end stays smooth, as it does in a drag without perpendicular,
and a segment whose anchors coincide bends as it does without
perpendicular. With Direct Selection, Shift pressed once a curved
segment's drag has started sends perpendicular; Shift held at the press
still toggles the path's selection, as before. Direct Selection's
spine-segment drag and the Anchor Point tool's segment drag send Shift
as perpendicular too, so the Pen with Alt does as well. A straight
segment dragged with Direct Selection already moves at 45° steps with
Shift.
Docs: docs/mcp.md, docs/target-app-parity.md.
Node editing as the public manual describes it: Direct Selection's anchor squares (hollow
or filled), Reshape Segment over a curved segment, Group Selection's plus (also Direct
Selection with Alt), the arrow hollow while a drag snaps, and Alt-copy arrowheads. The
Anchor Point caret, the Curvature pen and Free Transform's side-shear arrows (ShearH,
ShearV) are drawn in code. Lasso, the freehand, symbolism and other tools return cursors
of their own that borrow their old look until drawn (Cursor::stand_in).
crates/tools/src/cursors.toml lists every Cursor value, when it shows and its hotspot,
for whoever draws them; `cargo xtask cursors` (in ci) warns about a missing, unknown,
repeated or incomplete entry and never fails. The busy cursor is listed as missing (G1).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A Blob Brush stroke merged with every touching closed path of its
color that had no stroke, and the blob it drew or merged into was
always left selected. The Blob Brush Tool Options had Size only.
The Blob Brush Tool Options now have Keep selected and Merge only
with selection, both off by default. A blob that a stroke draws or
merges into is no longer left selected unless Keep selected is on,
and the rest of the selection stays as it was. While Merge only with
selection is on, a stroke merges only with selected blobs, and with
nothing selected it draws a new blob. The options persist like the
tool's Size, and path.blob takes keepSelected and mergeOnlySelection,
both false by default. Keep selected stays on by default for the
Pencil and Paintbrush.
Docs: docs/target-app-parity.md, docs/control-protocol.md.
The Curvature tool built its curve as a uniform Catmull-Rom: both handles of a
smooth point a sixth of the chord between its neighbours, the ends of an open
path without handles. Uneven spacing overshot or looped, a J or U from three
points bent sharply at the middle with straight legs, and the end segments
looked flat.
- `curvature_spline` (draw2.rs) makes each stretch of three points follow the
circle through them: a smooth point's tangent is that circle's
(`smooth_handles`), each handle `chord / (3 cos²(α/2))` long, α between
handle and chord capped at 90° (`arc_handle`). The ends of an open path
mirror their neighbour's tangent in their chord (`end_handle`). A turn
tighter than 30° (`TIGHT_TURN`) shortens its handles, so a narrow V comes to
a point. Degenerate points become corners. `path.curvature` and the rubber
band use it.
- `catmull_rom` is unchanged for the Pencil and Paintbrush fitting.
- `bend_last` (from: smooth), `curvature_move` on a smooth point, the point
`curvature_insert` adds on a straight segment, and `path.convertAnchor` to
smooth without x/y (`curvature_smooth`) use the same rule.
- `curvature_extend` gives the new end its end handle unless Alt-clicked
(`corner` param on `path.curvatureEdit`).
- Neighbours of a point dragged on an existing path keep their tangents (a
Pen-drawn shape isn't reshaped); the path being drawn re-curves throughout.
A Pencil or Paintbrush stroke always left the path it drew or continued
selected. The reference app's Pencil and Paintbrush options have Keep
selected for this, and VectorCraft's Tool Options had no such row.
The Pencil and Paintbrush Tool Options now have a Keep selected
checkbox, on by default, which keeps today's behavior. When it is off,
a new path is not selected and the selection stays as it was, and a
continued path is removed from the selection while the rest stays. The
stroke is still one undo step. The option persists like the tools'
other options, and path.freehand and brush.freehand take keepSelected.
Docs: docs/target-app-parity.md, docs/ui-parity.md, docs/control-protocol.md.
The typed [ and ] now reach the Blob Brush, the Eraser and the Symbolism
tools, whose bracket keys are in the public shortcut lists. A size of the
Paintbrush's own (and path.freehand's scale) is left out until its
behaviour is decided: #1661 stays open for that.
The tools took `[` and `]` (the Blob Brush's and the Eraser's size, the
Symbolism tools' diameter and, with Shift, intensity), but the app never
passed the keys on: only `ui.key` over MCP reached them.
- The keyboard handler gives a typed `[`, `]`, `{` or `}` (Shift) to the
active tool when it claims the key. It reads the typed character, so
layouts where a bracket takes Option or AltGr (Option-8 on a Turkish
Mac) work too. A field with the keyboard, the Type tool and Cmd/Ctrl
shortcuts are left as they were.
- The Paintbrush has a size of its own, 10 to start as the Blob Brush's:
`[` and `]` take a point off or add one, and the next stroke is drawn
at size / 10 of the stroke weight (path.freehand `scale`). Public
references describe the keys as changing the size the Paintbrush draws
with, before drawing, the brush definition left as it is; so the
stroke weight new art takes stays, and the selected path keeps its
stroke. Every brush type, as the report and the Tuts+ guide describe;
the step is our own.
The Anchor Point tool drags any segment of a selected blend's spine into
a curve, straight ones too, and Direct Selection reshapes a curved spine
segment as it does a path's (a straight one it leaves, as on paths). Both
run the new `object.blend.spine.reshapeSegment`, which bends the segment
with the same math as `path.reshapeSegment`, now shared as
`SubPath::bend_segment`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Double-clicking a brush in the Brushes panel (or the panel menu's Brush
Options…) opens its options. Calligraphic Brush Options: Angle,
Roundness and Size, each Fixed, Random or Pressure with its Variation,
over live previews of the nib and of a stroke. Bristle Brush Options:
Shape and the bristle sliders. OK runs brush.options; strokes painted
with the brush update.
The Paintbrush records the pen pressure along a stroke (path.freehand
takes [x, y, pressure] points), and a Calligraphic brush with Pressure
variation changes its nib along the stroke, from the value less the
variation at the lightest pressure to the value plus it at the heaviest.
Brushes saved before keep their Random variation. Pen pressure doesn't
reach the app on macOS yet (winit 0.30 reports none there).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Curvature tool only edited the path it was drawing. It now edits any
selected path, whatever drew it, keeping its shape except where edited:
a click on a point makes it the current (direct-selected) point and a
drag moves it, re-curving only its two segments (the neighbours keep
their handle directions); Alt-click or double-click toggles it smooth or
corner and Delete removes it; a click on a segment adds a smooth point
without changing the shape, and a drag moves it in the same undo step.
With an end of an open path current, clicks go on from it (the old
segments keep their shape) and a click on the other end closes it.
The edits go through a new path.curvatureEdit command (move, insert,
extend, close), path.convertAnchor and path.removeAnchor, one undo step
each. The tool now claims Delete/Backspace while it has a point to
remove, so the key no longer deletes the whole path.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
An anchor was picked within the selection tolerance (3 px), the same reach
as its segments: a press a little off the anchor's 5 px square took the
curve instead.
- `ToolContext::point_tol`: anchors and direction handle ends are picked
within the selection tolerance, but at least 2 px past the drawn point
(4.5 px at the default Size 3, more with a larger Size). Anchors are
tested before segments, so where both are within reach the anchor wins.
- Direct Selection (presses, Highlight anchors on mouse over, blend spine
points and handles), the Anchor Point, Delete Anchor Point and Scissors
tools, and the Pen (its Alt conversions; its close/continue reach stays
5 px unless the points are drawn larger) use it. Segments, objects and
frame edges keep the selection tolerance.
- Of the topmost path with anchors in reach, the nearest anchor is picked.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every drawing tool now asks one snapper (guides::DrawSnap) for the points it
places: the Pen's and Curvature tool's anchors, the Pencil's ends, the shape
tools' start and dragged corner or radius (Rectangle, Rounded Rectangle,
Ellipse, Polygon, Star, Line Segment, Arc, Spiral, the grids), the Type tool's
click and frame and a new artboard's corners. Points land on other objects'
anchors, centres and paths ("anchor", "center", "path") or line up with their
anchors, edges and centres ("align"); hovering shows it before the press, the
Pen's guides end its rubber band, and the Pen lands on the path being drawn
too. Shift keeps a point to its 45-degree step (from Constrain Angle) or a
box's diagonal and slides it along that way into line with a target.
Preferences > Smart Guides > Construction Guides and Angles now act: a drawn
point near a guide through the point it leaves from lands on it.
Before, the Pen snapped only its press and showed nothing, and the shape tools
re-gathered targets on every drag step from the document showing their own
preview, so the dragged corner stuck to where the last step left it.
Performance: targets are gathered once per document state (keyed on the
document's uid and revision, now in ToolContext), from the art in the window,
and sorted, so the anchors, centres and lines near the pointer are found by
bisection. Leaving objects out of the targets no longer looks up each node's
ancestry (quadratic in the document's size): one pruned walk does it, which
also speeds up the Selection tool's moves and resizes.
The direction handles' HandleSnap (#494) is now a DrawSnap holding its own
targets (Targets::for_handle) for the drag: one cache, one lookup.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Reported: with the Pen there was no way to edit curves in place as Ctrl does in Illustrator on
Windows (Cmd on the Mac), segments couldn't be grabbed, and the curve-editing tools felt slow and
sometimes didn't take a handle.
- Cmd/Ctrl held at a press with any tool but a selection tool now borrows the selection tool in the
engine (Session::pointer), not in the canvas: the selection tool chosen last, or Direct Selection
for the Pen, Curvature and anchor tools until one is chosen. The tool lent to isn't deactivated,
so the Pen goes on drawing its path after the release while that path stays selected; it no
longer draws on another open path selected meanwhile. Agents reach it with pointer_gesture
mods.cmd. With Cmd held the pointer is the borrowed tool's. Choosing a tool or switching
documents mid-gesture gives the tool back first.
- Pen + Alt over a segment of a selected path reshapes it, as the Anchor Point tool does.
- The handles shown are the handles that drag (one helper for Direct Selection, the Anchor Point
tool and Pen + Alt): Direct Selection now drags the handles of a path selected as a whole (as
the Pen leaves it, so Cmd + drag of a handle while drawing works), the Anchor Point tool no
longer grabs handles that Show handles when multiple anchors are selected hides, the nearest
handle wins, and a handle shorter than the tolerance leaves its anchor to be picked. The anchor
tools pick within Selection & Anchor Display > Tolerance instead of a fixed 4 px.
- path.reshapeSegment keeps a smooth anchor at either end smooth (its other handle turns with the
moved one) instead of kinking it.
- A dragged handle gathered its smart guide targets from the whole document on every pointer move
(21 ms per move on 20,000 paths): HandleSnap now gathers them once per drag (1 ms).
vectorcraft-cli perf measures handle and segment drags on a 5,000-anchor path.
- catalog::is_selection_tool and catalog::edits_anchors replace the UI's own lists.
- Tests in tools, engine and MCP (headless pointer_gesture); docs/mcp.md, control-protocol.md,
ROADMAP.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Discord feedback: Alt with the Pen didn't move a direction handle on its own, and there was no
way to break a path at an anchor and pull the ends apart.
- Pen: Alt held over a handle end or an anchor of a selected path (the one being drawn too) hands
the gesture to the Anchor Point tool, with the convert cursor: dragging a handle moves it alone,
clicking a smooth anchor makes it a corner, dragging an anchor pulls out symmetric handles.
Drawing goes on afterwards. Handles hidden by a partial anchor selection aren't grabbed.
- path.cutAtAnchors cuts at the direct-selected anchors in one undo step: a closed path opens
there, an open one becomes one path per piece, and one anchor of each cut stays selected so a
drag pulls the path apart. It answers {ids} and refuses (no undo step) when only open ends are
selected. path.convertAnchors checks `to`, skips stale anchor refs instead of indexing past
them, and keeps a smooth anchor's handles when converting to smooth.
- SubPath::cut_at and SubPath::smooth_anchor (geom) now back path.split, path.cutAtAnchors,
path.convertAnchor and path.convertAnchors, replacing three copies of that logic.
- Control bar and Properties panel: "Convert:" corner/smooth and "Anchors:" remove, connect
(Join), cut buttons when anchors are selected; Cut Path on the task bar and the context menu.
New original icon dc-anchor-smooth.svg (ASSETS.md row).
- ja, zh-hans, zh-hant and es strings (cs for the context menu item), es @msg rows; docs/mcp.md
section; ROADMAP.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Color, Alignment Guides, Anchor/Path Labels, Measurement Labels,
Transform Tools, Object Highlighting and Snapping Tolerance are read:
- tools: `guides::GuideStyle` on `Targets` (`styled(cx)`) colours the
lines and labels and leaves them out when their option is off, the
snap itself unchanged; `ToolContext` gains the six fields and
`snap_tol()`, replacing the 5 px literal for every smart guide snap
(drawn points, moves, bounding-box handles, ruler guides, artboards,
reference points). The tools gate their `Overlay::Measure` readouts on
Measurement Labels (drawing, moving, ruler guides, artboards) or
Transform Tools (scaling, rotating, Free Transform, transform tools).
- engine: `with_tool_cx` fills them from `Prefs` (the colour parsed, magenta
as fallback); the colour's default is `#ff3dfc`, what the tools drew.
- ui-egui: the hover outline needs Object Highlighting and Smart Guides.
- Tests in tools (guides, select), engine (tests_prefs) and the canvas;
docs/mcp.md and ROADMAP.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Fourteen more Preferences options that were stored but read by nothing now
act, for the mouse and for agents (prefs.set, then pointer_gesture,
press_key or the commands):
- Selection & Anchor Display: Snap to Point and its distance (with Smart
Guides off, View > Snap to Point lands a dragged selection's grabbed
point, drawn points and reference points on anchors and ruler guides);
Move Locked and Hidden Artwork with Artboard (artboard.move, the Artboard
tool and Rearrange; off, hidden art now stays too); Enable Rubber Band for
the Pen and Curvature tools; Handles (solid, hollow, large);
Show handles when multiple anchors are selected (canvas and Direct
Selection's handle picking); Hide Corner Widget for angles greater than.
- General: Transform Pattern Tiles is the default of a new `patterns`
param on object.transform/move/rotate/scale/reflect/shear/transformEach
(journalled when the art uses a pattern), and the transform dialogs get a
Transform Patterns checkbox; Select Same Tint % (off, Select > Same
Fill/Stroke Color takes every tint of a global or spot swatch).
- Type: new type.step {attribute, by} steps size, leading, tracking, kerning
and baseline shift by the Size/Leading, Tracking and Baseline Shift
increments; Increase/Decrease Font Size (Cmd+Shift+. and Cmd+Shift+,);
the Type tool's Alt+arrows (kerning at a caret or tracking, leading,
Shift for baseline shift, Cmd/Ctrl for five steps). Enable Missing Glyph
Protection keeps characters a new font lacks in the font that had them
(text.setStyle, text.setRangeStyle). Fill New Type Objects With
Placeholder Text: type the Type tools place starts with placeholder text,
selected (text.create / text.createInPath take `placeholder`).
Units > General, Stroke and Type were already the single source of truth
(units.rs). Auto Size New Area Type, Show Font Names in English and
Highlight Alternate Glyphs need subsystems the app doesn't have yet and
stay open with the rest of #394.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- A dragged handle no longer snaps to its own path's bounds and centre, which move with the
handle; the path's anchors are point and alignment targets instead.
- Shift steps 45° from the Constrain Angle preference, like the cut and gradient tools.
- snap_draw and snap_handle share one pixel/grid/smart-guides switch.
- A test that a smooth anchor's opposite handle turns with a Shift-dragged handle and that Alt
still breaks it, and the tools' module docs (both from #338).
Co-authored-by: theironchef <6278036+theironchef@users.noreply.github.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Dragging a direction handle with Direct Selection or the Anchor Point tool
sent the pointer position straight to path.setHandle: Shift did nothing and
the handle never snapped, while the Pen already constrains the handles it
pulls out.
guides::snap_handle places a dragged handle: with Shift at a multiple of
45° from its anchor (the Pen's constraint, keeping the dragged length),
otherwise snapped as a drawn point is (smart guides, the grid, pixels).
Both tools use it and show the smart guides while the handle moves.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Line Segment family (Arc, Spiral, Rectangular Grid, Polar Grid)
ignored Space while drawing, as the shape tools did before #302. Both
tools now share shape::space_moves. A headless canvas test presses Space
for real in the middle of a Rectangle and a Pen drag: the shape and the
anchor move and the view doesn't pan. Adds the ROADMAP entry.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Pen's Auto Add/Delete had its own copy of the anchor and segment hit
tests and of the path.insertAnchor / path.removeAnchor actions the Add
and Delete Anchor Point tools build. draw2 now exposes anchor_in /
segment_in (the hit tests over a given set of paths) and insert_anchor /
remove_anchor, which both tools use. Adds the ROADMAP entry.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Taha-Mahmoodi