Art dragged off the canvas reached the panels (Asset Export, Graphic
Styles, Swatches, Symbols) only from the Selection tool: drag_art_out
checked for that tool by id. With the Direct Selection or Group
Selection tool the move stayed on the canvas, so nothing dropped.
Those tools now hand over a move too when every selected object is
selected whole (a press on its fill). A drag of anchor points or
segments, which they also call Move, stays a reshape and isn't handed
to the panels.
Merges kept prepending each side's whole summary as "previously: …", so
target-app-parity.md's status line had grown to 66 MB (839 copies of its
Target clause), gaps.md's and ui-parity.md's to over 1 MB. Each status
line now names its latest change only, as the progress-docs standard has
it; the revision histories keep the earlier ones.
The reference app switches the units of measurement with
Ctrl+Alt+Shift+U on Windows and Option+Shift+Command+U on macOS.
VectorCraft could set the document's units with document.setUnits or
a right-click on a ruler, but no command stepped through them and no
key did it.
document.switchUnits (Switch Units, default Cmd+Alt+Shift+U) sets the
document's units to the next one in the order a right-click on a
ruler lists them: Points, Picas, Inches, Millimeters, Centimeters,
Pixels, Feet & Inches, Meters, Yards, Feet, and from Feet back to
Points. Each press is one undo step, and the reply names the new
units. Keyboard Shortcuts lists it under Document.
The precise cursors shortcut-editor test used Cmd+Alt+Shift+U as a
free key; it now uses Cmd+Alt+Shift+Q.
Docs: docs/mcp.md, docs/ui-parity.md, docs/target-app-parity.md.
With the Selection tool, a single selected grid repeat shows a handle below the grid (rows), one right of it (columns), one past its bottom-right corner (both) and sliders between its first two columns and rows (horizontal and vertical spacing), as the public Set grid repeat options page describes. Each drag previews object.repeat.options and commits as one Repeat Options undo step; Escape cancels, and a drag that ends where it began leaves no step. Bounding-box handles keep priority where they overlap, and the controls hide with the edges or the bounding box. Before, a drag there scaled the source or started a marquee.
Part of #2691.
With Preview off, changes made in the Image Trace panel for one Image
Trace object were lost when another object was selected: selecting the
first object again showed its stored settings. The panel now keeps the
waiting changes for each object and shows them again when that object
is selected, unless the object's own settings changed in the meantime.
When Preview was turned on while another object was selected, the
object is traced with its changes when it is selected again.
Preview is now the UI command imageTrace.preview ({on?}: on, off or
toggle), and both the panel's checkbox and ui.set's imageTracePreview
run it. The command label has a row in every catalog.
* Build: craft-libs at 2869b8cc
Pin craft-pdf, craft-print, craft-docpath, craft-ui, craft-keymap,
craft-window and the patched hayro/krilla backends to craft-libs
2869b8cc1077530bd07a7e192fb2b0e1304a1354, with the pdf-deps gate,
NOTICE, ASSETS.md and docs/pdf-backend.md at the same revision.
PDF: no modification date beyond the creation date, DeviceN images
are not JPEG-encoded, and clipping text draws nothing (its outlines
arrive as a clip path).
* Docking: compile against craft-ui at 2869b8cc
Floating windows are trees of groups: window_panels and window_active
read one as a flat group, and windows rebuilt from the legacy groups
keep their ids. Unknown dock actions are rejected, the new ones are
checked like the old, and every panel a close action removes keeps its
return location.
* Docking: panels and canvas on craft-ui's docking area
* Docking: tests for the dock area, flyouts, floating panels and the Tools panel
* Docking: catalogs without the old dock's strings
* Build: craft-libs at 8a503cfe
* Docking: floating panels in OS windows of their own on the desktop
* Docking: modal dialogs block panel windows; their keys and dropped files reach the main window
* Docking: art dragged onto a panel in its own window drops there
* Docking: module doc names the OS windows
* Build: craft-libs at a042cf26
* Docking: onto, above, below, collapsed, icon and column places on Float and Dock Panel; ui.docking
* Docking: command descriptions of Float, Dock, Move and Collapse Panel for the craft-ui layout
* Docking: control protocol describes the craft-ui layout, its commands and ui.docking
* Docking: rustfmt
* Docking: layouts saved before the canvas joined convert on load
Saved ui.json files and workspaces from before the shared layout held the
canvas (a dock-only tree plus floating_panels, docking_icons,
docking_collapsed, dock_collapsed and dock_width) convert into one layout:
the dock tree's groups in the main column, the icon column with the panels
dropped on it, floating groups and sets, sets docked as columns, collapsed
groups, the dock width and the places of closed panels. The legacy fields
are read, never written. A ui.json read only in part is copied to
ui.unreadable.json before anything saves over it.
* Docking: catalogs without the old collapse message
* Docking: converted floating sets start at most 720 points tall
* Docking: closed icon panels convert into the icon column; old floating rects, set heights and a copy of the file before conversion
* Build: craft-libs at 27e60765
* Docking: dock column places and icon count from the icon column; a docked column moves to a later place
* Build: craft-libs at d24e4bcc
* Build: craft-libs at 5bbe9f62
* Docs: floating panels in OS windows of their own close the other-monitor gap
* Docking: keys forwarded from a floating panel's OS window run shortcuts while the main window is unfocused
The old pen glyph was a crude pentagon with a floating dot and a stray
stem. Redraw it as the precision instrument it is: the pen-tool icon's
nib — sharp point on the hotspot, shoulders flaring to their widest
two-thirds back, a narrower flat heel, a slit widening into the round
breather hole — swung round onto the selection arrow's midline
(arrow_axis), so holding Cmd/Ctrl to swap between the Pen and the
selection tools no longer rotates the cursor under the pointer.
Badges keep their meanings (*, +, -, o, /, j, ^, ~) and multi-stroke
ones now draw all halos under all ink via strokes(), so neighbouring
strokes no longer cut each other into blobs.
With Shift or Alt held (Alt only while Alt key toggles to Smooth Tool
is off), a Pencil press on an end of a selected open path draws a
straight line that continues the path, but before the press the cursor
was the plain straight-line cursor. Draw straight lines with the Pencil
tool says a path-continuation icon appears on the Pencil over that end:
https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/draw-shapes/draw-straight-lines-with-the-pencil-tool.html
Over such an end the cursor is now PencilContinue, the straight-line
cursor's line leaving a small filled square.
The check is the one the press makes (Edit Selected Paths, the same
end lookup). Away from the ends, with Edit Selected Paths at 0 pixels,
with nothing selected and while the line is drawn, the cursor is as
before.
Docs: docs/target-app-parity.md and docs/ui-parity.md, where the
duplicate Pencil lines and rows left by earlier merges are cut to one.
A Pencil or Paintbrush stroke released within Close Paths When Ends Are
Within of its start closes, but the cursor gave no sign of it. While the
pointer is where a release would close the stroke, the cursor is now
PencilClose (PaintbrushClose for the Paintbrush), the crosshair with a
ring, as Draw straight lines with the Pencil tool describes:
https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/draw-shapes/draw-straight-lines-with-the-pencil-tool.html
The check is the one the release makes, on the end the stroke would
take (snapped for the Pencil). A straight line (Shift or Alt held at the
press), a stroke that continues a selected path, a stroke that redraws
one and a smoothing drag show no ring.
Docs: docs/target-app-parity.md, docs/ui-parity.md.
Live Paint builds its faces and edges from path outlines alone. Make,
Merge and the Live Paint Bucket put every selected object among the
group's hidden sources, so type, an image, a symbol, a blend or a group
holding one of them vanished from the canvas. They now refuse such a
selection before changing anything ("Live Paint takes paths and compound
paths: convert type, images and other objects to paths first"), as type
and raster images can't go into a Live Paint group directly
(https://helpx.adobe.com/illustrator/desktop/paint-and-fill/learn-painting-basics/create-live-paint-groups.html).
One predicate, vectorcraft_tools::builder::live_paint_takes (Live Paint
groups, paths, compound paths and groups of them), decides it for Make,
Merge and the Properties panel's Merge Live Paint, which no longer shows
for a selection Merge refuses. The message has an @msg row in every
catalog.
Tests: tests_build::live_paint_refuses_type_and_images_and_changes_nothing
(Merge, Make and the Bucket with type, an image or a group holding type:
refused, document, selection and undo history unchanged; a group of
paths and a path still merge) and
panels::properties::tests::merge_live_paint_is_a_quick_action_for_a_live_paint_group_and_more
(hidden with type selected). Both fail without the change.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The Properties panel has the additional contextual controls the public
Properties panel overview lists
(https://helpx.adobe.com/illustrator/desktop/get-started/learn-the-basics/properties-panel-overview.html),
each running the existing command:
- Quick Actions: Blend Options for one selected blend while the Blend
tool is in use (the Blend Options dialog; OK is one undo step), and
Merge Live Paint when a Live Paint group is selected with more objects
(livePaint.merge).
- Appearance: the stroke's Variable Width Profile list (the Control
bar's) with the Width tool or when the stroke has a variable width
(stroke.set {profile}); beside fx, with one effect on the one selected
object (its own, or a fill's or stroke's), its name and a Delete icon
that removes it (effect.remove); with several, the icon opens the
Appearance panel, as the overview describes.
- With Direct Selection and corners of one path selected, Corner and
Corner Radius set those corners' kind and radius
(object.setLiveShape); a live rectangle's and polygon's own rows
already do, so they get no second row.
The overview's Variable Font icon was already in Character. Every label
is already in every catalog.
Tests in panels::properties::tests:
blend_options_is_a_quick_action_for_one_blend_with_the_blend_tool,
merge_live_paint_is_a_quick_action_for_a_live_paint_group_and_more,
the_width_profile_shows_for_a_variable_width_or_the_width_tool,
direct_selected_corners_show_their_kind_and_radius,
one_effect_has_a_delete_icon_in_appearance (shown for the right
selection and tool, hidden otherwise, the right command in one undo
step). Documented in docs/target-app-parity.md, docs/ui-parity.md and
docs/gaps.md.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The Image Trace panel had no way to compare a trace with its source
image except changing View and changing it back.
The panel now has an eye button to the right of View, enabled with an
Image Trace object selected. While it is held down, the canvas draws the
selected Image Trace objects with their source image, whatever their
View, and draws their View again on release. The document, its View and
the undo history are unchanged. The renderer takes the objects in
RenderOptions::trace_source, which is also part of the canvas frame key
and the raster-effect cache key.
With Shift held before a press, the Pencil now shows a new cursor,
PencilStraight: its crosshair with a short straight line where the
closing cursor has its ring. The cursor follows the rule the press uses
to start a straight line, so it shows exactly when the press draws one.
With Alt key toggles to Smooth Tool on and Alt held too, the Smooth
cursor shows as before. Once the press is down, and with the
Paintbrush, Shift leaves the tool's own cursor. Use Precise Cursors
turns the new cursor into the plain crosshair.
Draw straight lines with the Pencil tool describes a straight-line icon
on the Pencil while Shift or Alt is held:
https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/draw-shapes/draw-straight-lines-with-the-pencil-tool.html
Every change in the Image Trace panel traced the selected Image Trace
object again at once, and there was no way to adjust several settings
first and trace once.
The panel now has a Preview checkbox before Trace. It is on by default
and kept with the UI preferences; Reset to Default leaves it. With
Preview off, setting changes wait in the panel until Trace applies them
as one undo step, or until Preview is turned on again. When Preview is
turned on with no Image Trace object selected, the object is traced
with the waiting changes when it is selected again. A change of view
keeps the waiting settings, and selecting another Image Trace object
shows that object's own settings. The control channel's ui.set takes
imageTracePreview.
With Alt key toggles to Smooth Tool off, holding Alt when a Pencil drag
starts now draws one straight segment from the press point to the
pointer, at the angle the pointer takes, as Shift does at 45° steps.
Pressed on an end of a selected open path, the line continues the path
from that end. Both ends snap to Smart Guides as a stroke's ends do, and
the line stays open when Alt is still held at the release. Shift and Alt
together keep the 45° steps.
Before, a drag started and released with Alt held drew a closed freehand
path. Alt pressed after the drag has started still closes the path at
the release, and with Alt key toggles to Smooth Tool on, Alt still switches
to the Smooth tool. Before a Pencil press, Alt no longer shows the closing
cursor.
Docs: docs/target-app-parity.md, docs/ui-parity.md.
Window › Symbol Libraries and the Symbols panel's Symbol Libraries Menu open each symbol library
in a library panel of its own, on the shared library panel code the swatch and graphic style
libraries use (https://helpx.adobe.com/illustrator/desktop/manage-objects/traces-mockups-symbols/create-or-import-symbol-libraries.html,
.../symbols-panel-options.html, .../create-and-place-symbols.html).
- Basic Shapes: one original library generated in code (circle, squares, triangle, diamond,
hexagon, star, burst, arrow); no other app's libraries.
- A click adds a library symbol to the document's Symbols as one undo step, with its Symbol
Options and the resources it uses (nested symbols, patterns, swatches, brushes, graphic styles,
images), and makes it the current symbol; one already there isn't added again, a clash of
names numbers the library's. Shift/Cmd-clicks select for Add to Symbols. Dragging a library
symbol onto the canvas adds it and places an instance there, in the same step.
- Save Symbols… (library menu, Window menu) and Save Symbol Library… (Symbols panel menu) write
the document's symbols as a .vectorcraft document holding only them, into the user library
folder (User Defined, window.userSymbolLibrary1-10) or a file; Other Library… reads the symbols
of any document VectorCraft opens, and a file it can't read is an error.
Commands: symbol.libraries, symbol.library, symbol.addFromLibrary (place, x, y),
symbol.saveLibrary, symbol.loadLibrary; UI: window.symbolLibrary (.other), ui.saveSymbolLibrary
(dialog saveSymbolLibrary). i18n rows in every complete catalog; docs updated.
Distance Guides, from the public "Use Distance Guides for accurate
placement" and "Smart Guides options" (Invoke Distance Guides) pages:
with Smart Guides on, something selected and the Selection tool,
holding Alt/Option over another object shows the horizontal and
vertical distances between the selection and it, and over an empty
part of an artboard the selection's distances from the artboard's left,
right, top and bottom edges.
- guides::distance_guides measures the selection's bounds to a box: on
an axis on which they lie apart, the gap between their facing edges;
otherwise the offsets of both pairs of matching edges. Each line runs
across the middle of the overlap on the other axis (else the
selection's middle), with a dashed line out to the target's edge when
it passes beside it. An artboard is always measured edge to edge.
Labels are in the General unit, in the smart guide colour.
- The Selection tool keeps what its Alt hover points at and draws the
guides while idle; letting Alt go (the canvas re-hovers on a modifier
change), a press or moving off clears them.
- Overlay::Distance: the line with end ticks and its length in a pill;
the canvas draws it.
- Preferences › Smart Guides › Invoke Distance Guides (`distanceGuides`,
on by default), with i18n rows; View › Smart Guides gates it too.
- Hover only, as the pages describe: nothing while moving or nudging.
Tests: select::tests::alt_over_* (gap and edges beside and below,
artboard edges in pt and mm), distance_guides_need_alt_a_selection_and_
smart_guides, tests_prefs::invoke_distance_guides_measures_the_selection_
to_the_object_under_alt, canvas::tests::alt_over_another_object_draws_
the_distance_guide_label (frame test of the drawn label and line).
Step 3 of the Rectangular Grid tool and Arc tool help pages
(https://helpx.adobe.com/illustrator/using/tool-techniques/rectangular-grid-tool.html,
https://helpx.adobe.com/illustrator/using/tool-techniques/arc-tool.html)
and the Tools page (https://helpx.adobe.com/illustrator/using/tools.html)
say a double-click on the tool opens its Tool Options. For these four tools
the double-click (tool.options, and Enter once #2891 lands) said the tool
had no options (#2691).
The Tool Options are the tool's click dialog in dialogs/shapes.rs, opened
without a place to draw (shapes::open_options; a `__toolOptions` field
marks it), as the review of #2979 asked: no copied form code. Its OK runs
tool.setOption and draws nothing; Cancel changes nothing. The grids' dialogs
are titled Rectangular Grid / Polar Grid Tool Options there. The options
are what the next drag draws with and what a click's dialog opens at:
- Line Segment: Length and Angle (now kept by the tool and used by the
click dialog) and Fill Line (new: shape.line {fill: true} gives the line
the current fill; the click dialog has it too);
- Arc: lengths, Reference Point, Type, Base Along, Slope, Fill Arc;
- the grids: dividers, skews and switches, plus the Default Size and
Reference Point, now kept by the tool (width, height, reference) for the
click dialog; a drag leaves them out of its command.
The grids' Reference Point is drawn only as the 9-point locator (it also
showed as a plain number field).
New strings (Rectangular Grid Tool Options, Polar Grid Tool Options, Fill
Line) have rows in all 24 catalogs.
Verification:
toolbar::tests::double_clicking_the_line_arc_and_grid_tools_opens_their_tool_options
double-clicks each tool's toolbar button: the dialog and its title, Cancel
leaves the next drag as it was, OK draws nothing, the next drag uses the
option and a click's dialog opens at it (a grid at its Default Size);
line_segment_options_and_fill_line, grid_default_size_is_an_option_the_drag_leaves_out,
fill_line_gives_a_new_line_the_current_fill. Grid dialog tests now expect
the stored Default Size. Live: double-clicking the Rectangular Grid tool in
the release build opens Rectangular Grid Tool Options; OK with 2 and 3
dividers, then a drag, draws a 3 × 4 grid.
The Simplify help page says a path can be simplified whole or "a specific
path region with the Direct Selection tool"
(https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/modify-paths/manually-simplify-paths.html).
Simplify refitted every selected path whole, whatever part of it was
direct-selected.
object.path.simplify now looks at each path's direct selection: the
segments picked as segments, or else every segment with both anchors
selected. Each run of consecutive selected segments is refitted on its own
(vectorcraft_pathops::simplify_part) between its two end anchors, which stay
where they are with their handles on the side away from the run; every
other anchor and segment stays exactly as it was. A closed path's run may
cross its start point (the path then starts at the run's end anchor),
separate runs on one path simplify independently in one undo step, and the
runs stay direct-selected (as segments when segments were picked). A path
with only lone anchors selected still simplifies whole, as before, and
wholePaths: true simplifies partly selected paths whole. The slider, its
preview, Auto-Simplify and the Simplify dialog all run the command, so
they act on the part too. simplify_with now shares its run fitting with
the part refit (same results).
Verification: crates/engine/src/tests_simplify_part.rs (unselected anchors
and segments equal bit for bit, run end anchors fixed, the run within the
tolerance, two runs equal to each simplified alone in one undo step, a
closed run across the start point, picked segments, wholePaths, slider
preview and Auto-Simplify, a run that can't be simpler records no step)
and simplify_slider_and_dialog_simplify_only_the_direct_selected_part_of_a_path
(the slider's preview, Enter and the dialog's OK). Live: the release build's
slider at level 20 on a 91-anchor wave with anchors 30–60 selected refits
only that stretch.
Don Omondi