A PDF-compatible .ai read through its editing data kept the PDF part's
warnings that text was kept as outlines ("text was converted to
outlines", the U+FFFD warning and the warning on glyphs that differ
from the installed font). The layers take from the page only text
nodes and the stroked paths around them, so filled outlined glyphs
don't reach the document, and type made from the text document holds
every character.
- The warnings are dropped when the document holds no glyphs kept as
outlines. Stroked glyphs that come in with stroked type keep them.
- A text object that takes the page's type, next to glyphs the page has
only as outlines, lacks those characters: a new warning counts such
objects.
- vectorcraft_pdf exports the three warnings, is_outlines_note,
is_glyph_outlines and holds_outlines.
Docs: docs/target-app-parity.md.
The mesh covers the image's rectangle with its transform kept; each point takes the average colour and opacity of the picture around it. A linked image is refused.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
View › Rulers › Change to Global Rulers (Cmd+Alt+R) was a disabled
stub: the rulers always counted from one document zero point. The
reference app's public help describes two modes: artboard rulers, the
default, count from the active artboard's top-left corner, and each
artboard can have its own zero point; global rulers keep one zero point
for the whole document whichever artboard is active.
https://helpx.adobe.com/illustrator/desktop/measure-and-align/grids-and-guides/about-rulers.htmlhttps://helpx.adobe.com/illustrator/desktop/measure-and-align/grids-and-guides/use-rulers.html
`view.globalRulers {global?}` switches the mode (toggle by default),
undoable and saved with the document (`rulers`). The menu item reads
Change to Artboard Rulers while global rulers are on. A new document has
artboard rulers; a file saved before the mode existed has no `rulers`
key and opens with global rulers, so it measures as it did.
With artboard rulers, dragging the ruler corner sets the active
artboard's zero point, kept as an offset from its corner
(`artboard_ruler_origins`, by artboard id) so it moves with the
artboard, and double-clicking the corner resets it. The global zero
point (`ruler_origin`) stays separate. `document.rulerOrigin`,
`document.setRulerOrigin` and `document.resetRulerOrigin` take
`artboard`; `Document::ruler_origin_for` is the zero point with an
artboard active, falling back to the corner or the global one when a
stored value is out of range.
The rulers, the Transform, Properties and Control bar X/Y, the Info
panel's X/Y (which ignored the zero point before), ruler-guide
readouts and Shift ruler-tick snapping all count from that zero point:
the view's active artboard reaches the tools through `ViewInfo` and
`ToolContext::ruler_origin`. Command coordinates stay absolute.
Tests: engine/tests/ruler_origin.rs (default mode, per-artboard origin
following its artboard, global origin apart, toggle and undo, save and
legacy files, out-of-range values), ui-egui/src/tests_ruler_origin.rs
(position fields and corner drag on the active artboard, menu label and
shortcut), tools/src/rulerguide.rs (guide readouts and tick snapping).
Tests written for the single global zero point now turn global rulers
on first. "Change to Artboard Rulers" is translated in every catalog.
Docs: docs/ui-parity.md, docs/gaps.md (G7), docs/target-app-parity.md,
docs/mcp.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01U2JbUtM4MkzWLm9FgYiEsq
The Appearance panel's inline effect editor showed a parameter that
picks one of some values (Roughen's Points, Offset Path's Joins, the
menus of Smart Blur, Glass, Texturizer and De-Interlace) as a text
field holding the stored value, where the effect's dialog has a
dropdown. Its labels did not have the dialog's mappings ("Channel1"
and "Max Radius" for "Channel 1:" and "Max. Radius:"), and a plug-in
choice named mode whose value is a blend mode name showed the blend
mode list.
The editor now shows the other parameters that effect::choices lists
as dropdowns with the dialog's labels (Drop Shadow's Shade keeps its
radio buttons), translated in the "effect" context, and a pick sends
the dialog's value with effect.setParams. Glass's Texture menu ends
with Loaded Texture once a texture is loaded. A plug-in's choice lists
the plug-in's values, and the blend mode dropdown is only for our own
effects. The labels are form::humanize's without the colon. The dialog
and the panel both call form::choice_label and effect::glass_textures.
Docs: docs/target-app-parity.md.
In a rotated view the resize and rotate cursors were the ones for an
unturned view. With the view turned 90°, the right-middle handle of a
selection's bounding box shows at the middle of the box's bottom edge
and drags up and down, but its cursor was the left-right arrow. This
affected the Selection, Free Transform, Artboard, Slice Selection, Crop
Image, Perspective Grid and Perspective Selection tools, ruler guides,
and the spread handle of a freeform gradient.
Now each of these cursors turns with the view to the nearest 45°. The
Selection tool and the Perspective Selection tool turn the handle's
direction by the view's angle before they round it to a cursor.
ToolContext::view_angle reads the view's angle from the screen frame,
and Cursor::turned turns a resize or rotate cursor by it. The new
Cursor::rotate_about_in_view turns the pointer's direction from the
center by the view before it picks one of the rotate cursor's eight
directions. Cursor::rotate_about keeps its signature and behavior. At
0° every cursor is as it was.
Docs: docs/target-app-parity.md.
Three original Artistic filters on the pixel pipeline, each with a
catalogue row, the generic live dialog, translations and tests.
- Cutout: colours softened by Edge Simplicity (less with Edge Fidelity),
split into Number of Levels steps per channel and painted as flat
pieces in their average colour; slivers along softened edges take the
nearest large piece's colour.
- Poster Edges: channels posterized to Posterization + 2 levels, black
lines on the edges of any channel and of the outline, widened by Edge
Thickness and darkened by Edge Intensity.
- Neon Glow: dimmed greys screened with a glow colour from the light
areas (positive Glow Size) or the dark ones (negative), as strong as
Glow Brightness.
All keep coverage and work in document units at any Document Raster
Effects resolution. Photoshop filters 33/57; cargo xtask ci passes all
9 steps.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Native review of the rows added in the Finnish merge: "artboard" is
piirtoalusta everywhere else in the catalog, so the two export rows that
said piirtoalue now match; "Color Scheme" becomes Väriteema so it no
longer reads the same as Swatches (Värimallit). The other added rows
read correctly and are kept.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Object › Graph › Column… was a menu stub, so a graph's columns and bars
were always plain rectangles. The reference app fills them with a graph
design, vertically scaled, uniformly scaled, repeated with a value for
each copy, or stretched at a guide line.
graph.column (Column…) draws the columns, bars or stacked segments and
the legend swatch of the series picked with Group Selection with a
design saved by Object › Graph › Design. Vertically Scaled stretches the
design to each column's length at the column's width. Uniformly Scaled
scales it both ways to that length and centers it on the column.
Repeating stacks a copy for each Each Design Represents value out from
the zero line, and For Fractions chops the last copy at the value or
scales it down. Sliding keeps the part above the design's horizontal
guide line in proportion and stretches the part below. The design and
its options are saved with the graph, and the graph follows the design
when it is renamed or deleted. Columns drawn with a design cast no drop
shadow.
A marker or legend design made of one path is now drawn in a group of
its own. Painting a series with Group Selection then leaves the design's
paint alone, as it already did for designs of several objects.
Docs: docs/mcp.md, docs/target-app-parity.md.
Object > Live Paint > Gap Options was a stub, and paint leaked through
any gap between the paths of a Live Paint group. The reference app's
Gap Options stop paint at small gaps, close them with unpainted paths
and preview them on the canvas.
livePaint.gapOptions (Gap Options) sets a group's options: detect (Gap
Detection), size (small 3 pt, medium 6 pt, large 12 pt, or a custom
size over 0 up to 72 pt), color (the Gap Preview Color, #rrggbb or a
layer color's name) and closeGaps, which adds an unpainted path across
each gap to the group's paths. A gap runs from a loose end of a path
to the nearest point of any path within the size, unless the paths
already join the two close by. With detection on, the faces are made
again as if a line closed each gap, and each face or edge keeps the
look of the old one it lies in or on. The options are stored on the
group, so they are saved, copied and undone with it, and Expand drops
them. Merge keeps the bottom group's options when its Gap Detection is
on, or else turns Gap Detection on with Small when another merged
group has it on. When Gap Detection is off in every merged group,
Merge keeps it off. livePaint.info lists the options and the gaps up
to the size wide that no path closes.
The menu item opens a Gap Options dialog. With Preview on, the options
apply live and the gaps show on the canvas in the preview color, and
OK keeps them as one undo step. vectorcraft-pathops gains find_gaps
and live_paint_with_gaps.
Docs: docs/mcp.md, docs/target-app-parity.md.
i18n: the 19 complete catalogs have rows for the dialog's labels, and
bg's Gap Options menu label now names gaps instead of line spacing.
Window › SVG Interactivity was a disabled menu item. VectorCraft could
not attach JavaScript to an object's events or link JavaScript files
for SVG export.
The SVG Interactivity panel lists 19 events, from onfocusin to
onscroll. Pick one, type its JavaScript and press Enter to add it to
the selected objects; the list shows their events. Remove Selected
Entry removes the picked event, and the panel menu's Clear Events
removes all of them. Link JavaScript Files… opens the JavaScript
Files dialog, which adds a path or URL to the document's list and
removes the selected one. Its Choose… button puts a picked file in
as a file:/// URL. The commands are svgInteractivity.info,
setEvent, removeEvent, clearEvents, addFile and removeFile, and
ui.javascriptFilesDialog. Each edit is one undo step. A document
links at most 64 files.
SVG export writes each event as an event attribute on the object's
element and each file as a <script xlink:href> element. With the SVG
Tiny 1.2 profile, export leaves the events out with a warning. SVG
import reads the listed event attributes and the script links back
as text. It never reads a linked file or runs a script, and it leaves
inline scripts and the links after the first 64 out with a warning.
The native format keeps both.
An unnamed <g> with data-* attributes of its own around a single
object now imports as a group. Before, import folded it into the
object, which then took the group's data-* or, when it had its own,
dropped the group's. An unnamed <g> with event attributes stays a
group in the same way. The SVG import fuzz tests now include event
attributes and <script> elements.
Docs: docs/mcp.md, docs/control-protocol.md, docs/target-app-parity.md,
docs/ui-parity.md.
When pressing Ctrl+P to open the Print dialog and clicking Setup (or Settings), print.printerSetup previously discarded the selected printer name and unconditionally launched explorer ms-settings:printers. On Windows 10, this opened the Windows Settings Printers and scanners page, displaying the list of installed printers instead of the printer driver printing preferences.
Launch Windows native Printing Preferences dialog for the target printer using rundll32.exe printui.dll,PrintUIEntry /e /n printer, falling back to the system default printer or Settings if no printer is available or detected. Add unit tests covering command construction and fallback behavior.
Fixes#2569.
An Alt-click (Option-click on macOS) on the Artboards panel's New
Artboard used to add an artboard at once, as a plain click does. It now
opens Artboard Options for the new artboard, filled in with the name and
size that artboard.new {} would give it, and adds nothing yet. OK adds
the artboard with the fields where artboard.new {} would place it (20 pt
to the right of the last artboard) in one undo step, and makes it the
active artboard; Cancel adds no artboard. A plain click and a row
dropped on the button work as before.
The new UI command ui.newArtboard ("New Artboard Options…") opens the
dialog. It is listed after ui.newLayer, and its label has a row in each
catalog.
Docs: docs/mcp.md, docs/target-app-parity.md.
The Contextual Task Bar showed only with the selection tools and
selected objects. With the Artboard tool it never showed.
With the Artboard tool, the bar now sits under the selected artboards
and offers Resize, which opens Artboard Options for the active
artboard; Duplicate, which copies each selected artboard in one undo
step and selects the copies; Rearrange All, with two or more
artboards, which opens Rearrange All Artboards; and Export, which
opens Export for Screens with the selected artboards checked. The
objects' Fill, Recolor Artwork and Lock buttons are not shown with
the Artboard tool. "Resize" has a row in every catalog.
Docs: docs/target-app-parity.md.
With the Artboard tool in use, the Control bar showed Move and Scale
Artwork with Artboard and then the object controls (Fill, Stroke,
Opacity and the rest). The reference app's help lists the Control
panel, with the Artboard tool, among the places to add, delete,
rename, resize and position artboards, set their orientation and
reference point, and open Artboard Options.
While the tool is in use, the Control bar now shows the active
artboard's controls in place of the object controls: Preset, Portrait
and Landscape, New Artboard, Delete Artboard, the Name field, Artboard
Options, Rearrange All Artboards, the Transform link, Move and Scale
Artwork with Artboard, and the reference point with X, Y, W and H and
the Constrain Width and Height Proportions link. Each control runs the
command its Properties or Transform panel counterpart runs, and the
reference point is the one the Transform panel uses. In an 800-point
window the controls up to the Transform link fit, the two artwork
options show as their boxes with their names in tooltips, and the link
opens the position and size in a popover, as it does for objects.
Docs: docs/target-app-parity.md.
BFlat