- packaging/linux/package.sh: one verify_sha256 helper replaces the four
repeated printf|sha256sum -c pipelines.
- packaging/macos/package.sh: stapler_retry copies its positional
arguments into locals before use.
- swatch_options: f64::from(v) instead of v as f64 (same value; the
argument is an f32, so the conversion stays).
With Method Overlapping, each color layer covered every pixel of the colors
above it in the stack. A small dot or square on a background was then traced
once in its own color and again, at the same bounds, in every color between
the background and it, and with Shapes on each copy became its own live shape.
Those layers also ended on edges they never touched and showed through the
anti-aliased rim there.
Each layer now leaves out every 4-connected part of its stacked area that holds
no pixel of its own color. This changes the result of many Overlapping traces,
the photo presets included: fewer paths (High Fidelity Photo 121 to 69.6 on its
own quality inputs, Low Fidelity Photo 37.1 to 26.1) and no rim, around a
shape, of a color that sits apart from it. One existing test that counted the
extra copies now expects one layer per area, and another that compared layer
pixel counts now checks that the bottom layer covers the whole image.
Two shapes that overlap by less than the region precision (0.01 pt) leave
their overlap out of the Shape Builder's regions as a sliver. Merging the
regions on both sides of it united only the picked faces, so the result
was a compound path with a hairline gap where the overlap had been.
A merge now takes in each dropped sliver next to a merged face when only
the merged faces' shapes fill it, both from the arrangement and from the
planar map used when open paths are selected. A thin cutout that no shape
fills stays a hole. What is left of a shape after the merge takes in a
sliver only where the shape covers it and the merged shape does not take
it in, so the two do not overlap. Pathfinder operations and Live Paint do
not use the merger and are unchanged; Live Paint's planar map does not
test which shapes cover a sliver.
When both sides of a 1.5 pt bar have a point level with a click 0.1 pt
from its end, the point of each side nearest the click is the end of a
segment, so the sides were not tried and an Alt-click there touched the
end edge.
A segment end now also counts when the segment is square there to the
line to the point, so splitting a side at the click gives the same
answer as an unsplit side.
shapeBuilder.merge built the planar map of the selection again, on the
thread that runs the command, although the Shape Builder tool had just
built the same map for its hover. The tool now returns its map from a
new Tool::shape_builder_map, and the command uses that map when its
inputs are the merge's inputs and its gap is the merge's gap; otherwise
it builds its own as before. The tool's map has the outline edges, so
erasing and splitting a stroke use it too.
CodeRabbit on #4080: `needed` summed footprint pieces before insertion
deduplicated them, so on a degenerate grid (ten collinear lines, 4,096 pieces
each in ten cells) every item exceeded the budget and went to the scanned list,
making the per-cell assertion vacuous. The cells are now collected in piece
order and consecutive repeats dropped before the budget check and the filing;
the horizontal fixture asserts `rest` is empty and that the lines are filed.
docs/target-app-parity.md: the Path operations area row, the Shape Builder
row and the evidence list record the bounded index (scores unchanged).
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014gCpjL3yUhaH3jRp7ksufh
A group counted as a Live Paint group when its name started with "Live
Paint". A plain group named, for example, "Live Painting" was then read
as one. With it and another shape selected, the Shape Builder found no
regions in it, and a merge on the other shape deleted the group and its
paths. Make Live Paint took the group as a Live Paint group to merge
into, and its paths did not become sources.
A Live Paint group now also needs its sources group, the group named
"Live Paint Sources" that Make Live Paint puts in it. A plain group with
such a name is traversed like any other group.
draw_path, draw_shape and object.setProps take opacity in percent (0-100),
but the document.inspect / document.node summary behind doc_inspect,
inspect_document and vectorcraft://object/{id} reported the stored 0-1
fraction under the same name. An agent that read 0.55 and wrote it back
got a nearly invisible object.
The summary now adds opacityPct (0-100, rounded to 1/100 of a percent)
beside the unchanged opacity, and the tool, resource and command
descriptions say which scale each field uses. Round-trip test in the mcp
crate: draw at 55 %, read 55 back from doc_inspect, inspect_document and
the object resource, write it back unchanged.
A point 0.1 pt from the end of a 1.5 pt bar is nearest the end of the
bar, and the line from there through the point runs along the bar, so
the region did not count as narrow and an Alt-click there touched the
end edge.
A region now counts as narrow at a point when it is no more than twice
the tolerance across from any outline segment within the tolerance whose
point square to the line to the point lies inside the segment, as well
as from the nearest point of the outline. Segment ends other than the
nearest point are not tried, so a point added on an edge does not change
the result near a corner.
Follow-up to #4021. The grid filed each piece of a segment under its cells
without checking, so a degenerate grid (collinear horizontal lines: cells a
hundred points wide and a hair tall) stored one segment ~400 times per cell,
and coincident vertical segments (one column, a row per segment) filed every
segment under every row: a quadratic number of references, about a GiB for
16,384 segments within the Shape Builder's limit.
Now a segment is filed once per cell (its pieces come in order, so the cell's
last entry is enough to check), and the grid holds a budget of references
(64 per item plus four rows' or columns' worth, `reference_budget`); the
items past it go to the scanned list, so the index stays O(n·sqrt(n)) in
memory and every lookup still finds every segment through its point.
Regression: `rect_index_holds_a_bounded_number_of_references` (fails without
the change: 4,100 references per cell for ten collinear lines).
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014gCpjL3yUhaH3jRp7ksufh
In erase mode the tool tests each point for a line piece or an edge
within the tolerance before the region under it. Every point of a region
narrower than twice the tolerance is that close to its edges, so an
Alt-click, the Alt hover and an Alt-drag over a thin overlap touched its
edges and not the overlap, and the overlap was left behind.
A point in a region now touches the region when the region is no more
than twice the tolerance across there, measured from the nearest point
of its outline through the point to the outline on the other side. This
covers a drag at any angle, a drag that starts or ends in the region,
and a thin shape inside another or on its own. Near an edge of a wider
region, the edge is touched as before.
## Summary
`vectorcraft-cli convert` to PDF now passes `preserveEditing: false`, matching
a command-line converter expectation while Save As PDF in the app still uses
the VectorCraft Default preset. `--preserve-editing` opts in and adds a JSON
warning when the native document attachment is written.
## Tests
Integration test in `vectorcraft-cli` checks default PDF output has no editing
attachment and `--preserve-editing` embeds it with a warning.
Closesstorytold/vectorcraft#3627
Co-authored-by: nrq6993-a11y <nrq6993-a11y@users.noreply.github.com>
## Summary
`vectorcraft-cli convert` to PDF now passes `preserveEditing: false`, matching
a command-line converter expectation while Save As PDF in the app still uses
the VectorCraft Default preset. `--preserve-editing` opts in and adds a JSON
warning when the native document attachment is written.
## Tests
Integration test in `vectorcraft-cli` checks default PDF output has no editing
attachment and `--preserve-editing` embeds it with a warning.
Closesstorytold/vectorcraft#3627
Co-authored-by: nrq6993-a11y <nrq6993-a11y@users.noreply.github.com>
Use function paths where a closure only forwarded its argument
(PoisonError::into_inner, OsStr::to_str, FindRange::is_empty), and drop
redundant 'static on associated and module consts. No behaviour change.
BFlat