A Mesh tool click within the hit tolerance outside a gradient mesh hit the
mesh, but object.mesh.addLine looked for the point inside the outline only
and failed with "point is outside the mesh". The same click on a path's edge
made a 1x1 mesh without the line.
- GradientMesh::locate_within takes a tolerance: a point outside the mesh
within it of the outline gives the nearest point of the edge.
- object.mesh.addLine and object.mesh.create take an optional `tolerance`
(0 by default), and the Mesh tool sends its hit tolerance.
A sample now shares one work limit, counted in objects looked at, across
hit tests, pattern tiles and the tile or symbol art it places for hit
testing, and gives no color when the limit runs out. Objects that give
no color are skipped by id instead of cloning the document for each
retry, each nesting level reuses one scratch document that holds only
the symbols, and patterns and images are looked up in the sampled
document. The sample runs on a deep stack and follows art inside art at
most 16 levels deep.
A symbol instance is now sampled as it draws: its art is stained by the
instance's fill and placed by the instance's transform without moving
the patterns in it or scaling its strokes. Between the shapes of its art
the sample shows what lies below instead of the stain, and a pattern
tile holding an instance is sampled wherever the symbol's art reaches.
Shift-click with the Eyedropper sampled solid colors, gradients and
images only; on a pattern fill or a gradient mesh it sampled nothing.
- A pattern gives the color of the front-most tile art at the point,
placed by the pattern's transform, at any tile size. Tile art that is
itself a gradient, image, mesh, symbol or pattern is sampled the same
way, and a pattern inside tile art moves with its tile. A gap between
the tile art gives the color of what lies below.
- A gradient mesh gives the patch color interpolated at the point.
- A symbol instance gives the color of its symbol's art at the point.
The Live Paint Bucket's Eyedropper sampling and Brush Options' Key Color
eyedropper use the same sampling.
Homography::then_after returned products whose entries could overflow to
infinity or become NaN. A move, transform or grid reproject of type or a
symbol instance whose stored projection has large finite entries stored such
a product, and the type was then drawn flat, since a projection that is not
finite reads as none.
- Homography::checked_then_after returns None when an entry of the product
is not finite.
- project_node composes each type and symbol instance projection with it and
returns false, leaving the object as it is, when one would not be finite;
moves and transforms in perspective and Define Perspective Grid with
reproject then return the horizon error and leave the document unchanged.
- transform_map, attach_homography and size_homography return None for such
a product.
- Edit Text returns the horizon error, and does not enter isolation mode,
when the type cannot be shown flat where it is drawn.
Found while testing crates/tools/src/distort/perspective/define.rs:84-86 (Rgb::parse)
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
The move drag remembers the plane it places loose art on. Pressing 4
during the drag, or dragging on after it, previews and commits the move
on that plane instead of dropping it. A 1-3 key pressed before the drag
threshold also sets the plane the move uses.
perspective.move takes constrain: true instead of a plane-space
direction. For each object, the command snaps the move to the nearest
axis or 45-degree diagonal of that object's own plane, so a selection on
several planes keeps every object on a line of its plane. The tool sends
the raw pointer with the flag.
On a diagonal, Snap to Grid now moves along the diagonal by the nearer
per-axis correction, so that edge lands on its gridline.
perspective.move takes an optional constrain: [dx, dy], a plane-space
direction. For an in-plane move, Snap to Grid's correction is projected
onto that direction, so a move the Shift key constrains to a plane axis
or a 45-degree diagonal stays on that line when an object edge lies near
a gridline. The Perspective Selection tool sends the direction for
Shift moves and copies. Moves without the param behave as before.
Holding Shift while dragging objects with the Perspective Selection tool
snaps the move, in the plane's own coordinates, to the nearest plane axis
or 45 degree diagonal. This applies to plain moves and to Alt and
Ctrl+Alt copies. The preview, the final move and the measurement label
use the snapped point. Pressing or releasing Shift, pressing 5 and
pressing 1 to 4 during the drag recompute the preview from the pointer;
a move perpendicular to the plane is not constrained.
Blob Brush Tool Options gain Angle (-180 to 180 degrees, 0 by default)
and Roundness (0 to 100 percent, 100 by default), with a preview of the
tip and three dabs; a drag in the preview square sets the Angle. The
elliptical tip keeps its angle on the page along a stroke, a 0 percent
tip is drawn 0.1 percent as wide as it is long, and Size set to
Pressure still varies its size. path.blob takes angle and roundness,
and both values are kept with the tool's options.
While a non-round tip drags, the Blob Brush shows the outline of the
area it covers with its length label, and an Alt drag that smooths
shows the Smooth tool's thin line.
Path Precision Tools gains the Shared Edge Merge Tool, kept out of the
toolbars (All Tools drawer and Object › Plug-ins › Path Precision Tools,
no shortcut), and Keep Shared Points Together:
- Shared Edge Merge Tool (sharedEdge): over two paths touching at two
coincident anchors (tolerance 0 to 3 pt) hovering shows the two
stretches and the merged edge; a click replaces both with it, half way
between them, or following the upper (Shift) or lower (Alt) path. Both
paths stay closed or open, anchors either stretch has inside are
matched on the other, one undo step.
- Making ends: near anchors meet on a click and an anchor one path lacks
is added to match; Shift+Alt asks for this inside a stretch.
- Keep Shared Points Together: an option that makes Slide Anchor Along
Path, Extend Path and Set Anchor take coincident anchors along. Nothing
else in the app changes.
- Shared Edges section in the Anchor Inspector: brush diameter,
coincidence and the option.
- Commands addon.pathtools.mergeEdge and movePointsTogether, params
validated and covered by the command sweep.
- Cursor stand-in, catalog rows in every language, docs and tests.
With the Live Paint Bucket, Alt-click on vector art samples its fill,
stroke and stroke weight into the paint defaults, and on a placed image
it samples the pixel as a solid fill with no stroke. Alt+Shift-click
samples only the color under the pointer, including an intermediate
gradient color or image pixels, into the active fill or stroke. Neither
click paints or changes the selection or selected art, and the next
Bucket click paints with the sampled paint. While Alt is held, the
Bucket shows the Eyedropper cursor and no face or edge highlight.
appearance.copyFrom takes `defaultsOnly: true` to update only the paint
defaults, and paint.sampleColor takes `clearStroke: true` to clear the
stroke default after an image sample into the fill.
With a path selected that the Smooth tool can change, Alt held at a
Paintbrush press now switches the drag to the Smooth tool: it smooths the
selected paths under the drag with the Smooth tool's radius and Smooth Tool
Options' Fidelity, and the cursor shows the Smooth tool before the press.
Alt pressed after a stroke begins still closes the path on release. With no
such path selected (nothing, only text or an image, or only a two-point
line), Alt at the press draws the closed stroke as before.
The Paintbrush no longer reads the Pencil's "Alt key toggles to Smooth Tool"
setting: its Alt close and Alt smoothing do not depend on it.
Path Precision Tools gains two tools, kept out of the toolbars (All Tools
drawer and Object › Plug-ins › Path Precision Tools, no shortcuts):
- Corner Tool (cornerTool): editable corners on any path through the
existing Live Corners. Hover shows an eligible anchor, a click cuts a
corner with the tool's radius and kind, a drag sizes it (Shift: whole
values), a corner's marker selects it and loads its values, resizes it
and removes it at 0 or on a double-click; a corner never grows past
what fits; an Alt-marquee cuts every eligible anchor inside.
- Corners section in the Anchor Inspector: radius, kind, selected count,
Apply to Selected Anchors.
- Slide Anchor Along Path (slideAnchor): a drag runs an anchor along its
curve, the neighbouring segments refitted by the keep-shape kernel;
Shift snaps where the tangent is a multiple of 45° from the constrain
angle.
- Commands addon.pathtools.cornerSet, cornerRemove and slideAnchor, one
undo step each, params validated and covered by the command sweep.
- Cursor stand-ins, catalog rows in every language, docs and tests.
Holding backquote while dragging with the Selection tool (move, bounding-box
scale or rotate) or the Rotate, Reflect, Scale or Shear tool applies the drag
to the selected objects' pattern fills and strokes and leaves their geometry
in place. The key state at release decides the result: the key may be pressed
after the mouse button goes down, and releasing it before the button comes up
commits an ordinary transform. Objects without pattern paint do not move.
PointerEvent gains a `backquote` flag (false when absent). The desktop canvas
reads it from the held key on every pointer event, and `ui.pointer` and the
`pointer_gesture` tool accept it per event or as a default for the gesture.
In vertical type, Alt+Down/Up (with or without Shift) steps kerning at a
caret or tracking of selected text, Alt+Left/Right steps leading, and
Alt+Shift+Right/Left steps baseline shift; Cmd/Ctrl makes five steps.
Horizontal type keeps its mapping. Selected type objects follow the same
rule when all of them are vertical, and a selection that mixes horizontal
and vertical type takes the horizontal mapping in one undo step.
When Alt switches the Pencil (with Alt key toggles to Smooth Tool on)
or the Blob Brush to the Smooth tool, the drag sent the drawing tool's
own Fidelity (1.5 by default) to path.smoothRegion. The Smooth tool
sends its own Fidelity (2.5 by default, set in Smooth Tool Options).
Both tools now smooth with the Smooth tool's Fidelity. The engine gives
them the stored Smooth Fidelity when it makes the tool, and again when
Smooth Tool Options changes while one of them is active. Each tool's
own Fidelity still sets how its strokes are fitted.
A straight Knife cut now starts only when Alt is held at the press.
Alt pressed later in the drag, even before the pointer moves, leaves
the cut freehand. Releasing Alt during a straight cut keeps it
straight.
With Shift+Alt, the cut keeps to 45° steps from the horizontal and
vertical whatever the Constrain Angle. The Pencil's straight line
still steps from the Constrain Angle.
Tests cover Alt after the press, Alt only at the release, a 90° cut,
a 30° Constrain Angle, and the cut boundaries in the engine.
Docs: docs/target-app-parity.md.
The Knife cut along the freehand drag whatever keys were held. The
reference app cuts in a straight line with Alt-drag, and it cuts at 45
or 90 degrees with Shift+Alt-drag.
With Alt held at the press, or pressed before the drag has moved, the
Knife's stroke is the press point and the pointer: the dashed line
shows it while dragging, and the release sends path.knife with those
two points. With Shift held too, the line keeps to 45° steps from the
Constrain Angle, as the Pencil's Shift line does. Shift is read on each
drag event and at the release. The cut stays straight when Alt is let
go, a line taken back to its press point sends no command, and Shift
alone leaves the cut freehand.
Docs: docs/target-app-parity.md.
Alt in a spiral drag now rounds the fitted segment count to whole winds
of four segments, counted from the segment count when Alt went down.
Ctrl/Cmd takes precedence when both keys are held, and switching back to
Alt starts from the current count with the held inner end kept. Arrow
keys, Escape, release and a new drag clear the held Alt count.
Tests cover both keys together, a switch mid-drag, Escape, the 2 to 1000
bounds and the committed path's anchor count. docs/mcp.md and
docs/target-app-parity.md describe the rule.
The reference app adds or subtracts winds from a spiral with Alt-drag
and changes its decay rate with Ctrl/Cmd-drag. VectorCraft's Spiral
tool did nothing with either key during a drag.
While a spiral is dragged out, Alt or Ctrl/Cmd keeps the spiral's
inner end at the distance from the center it had when the key went
down, and the outer end follows the pointer. With Alt the number of
segments changes to the nearest whole number that fits, within 2 to
1000, so dragging outward adds segments and dragging inward removes
them. With Ctrl/Cmd the decay changes to fit, within 5 to 99.99
percent, the decays a spiral is drawn with. When both keys are held,
Ctrl/Cmd changes the decay. Up/Down with a key still held move the
held radius to the new segment count. The new values stay when the
key is let go, and as the Spiral tool's segments and decay options
for the next spiral. Both keys also work with a 5 percent decay and
hundreds of segments.
Docs: docs/mcp.md, docs/target-app-parity.md.
Path Precision Tools gains the Parametric Shape Tool: ten kinds of shape
(rectangle, ellipse, polygon, star, ring, arrow, cross, heart, gear,
speech bubble) that stay editable as numbers.
- Geometry in vectorcraft_pathops::addons::pathtools::shapes: each kind's
outline, corner rounding limited to the middle of a side, a fingerprint
of the outline, recovery of centre, size and rotation after a move,
turn or scale, and recognition of plain rectangles, ellipses and
regular polygons.
- The tool (parametricShape, All Tools drawer and Object › Plug-ins ›
Path Precision Tools only, no shortcut): drag from the centre (Shift:
45° steps), arrow keys change the count and values while dragging,
handles edit a selected shape, double-click places one.
- Commands addon.pathtools.shape.create / .set / .convert, one undo step
each; params checked (counts 3..1000, sizes up to 16384 pt).
- A shape keeps its numbers in one object-data entry (vc-pathtools-shape)
that SVG export already leaves out; anchor edits make it a plain path.
- Parametric Shape panel, cursor stand-in, catalog rows in all 25
languages, docs and tests.
A built-in add-on under Object › Plug-ins › Smart Pen:
- The Smart Pen Tool draws and edits Bézier paths without switching
tools: a click adds the next segment straight or curved (a panel
toggle; Tab flips the segment being placed or the last one), a drag
makes a smooth point (Alt breaks the handle, Shift snaps to 45°, Space
moves the point), a curve after a straight segment joins it tangent.
- On existing paths it selects and moves points, removes a point keeping
the shape (Alt-click), toggles smooth/corner (double-click), drags
handles, reshapes a segment by dragging it and inserts a point on it
(Alt-click); it closes, continues and joins open paths.
- The Smart Pen panel: next segment straight or curved, remove points
keeping shape, make smooth, make corner, retract handles, close or
join.
The tool stays out of both toolbars as shipped; the All Tools drawer
lists it under the add-on's heading. Commands are addon.pen.*; the
existing Pen tool, commands and menus are unchanged.
A built-in add-on under Object › Plug-ins › Path Precision Tools:
- Anchor Eraser Brush: painting over selected paths removes the anchors
under the brush that the outline can do without within a tolerance,
refitting the handles beside them (Alt ignores the tolerance, Cmd/Ctrl
deletes without refitting, pen pressure can scale the brush); one undo
step per stroke.
- Extend Path tool: dragging an end of an open path carries it on
straight, by stretching its last curve or along the circle it curves
on, or shortens it back along itself.
- Measure & Inspect tool: drag to measure distance and angle; hover a
path to read segment and path length, area, curvature, tangent and
anchor angles and handles, in the document's units.
- Anchor Inspector panel: the selected anchor's position and handles as
numbers, with Make Smooth (auto-smooth rule), Make Corner, Equalize
Handles, Remove Points Keep Shape, Add Points and three ways to close.
- Add Points at Crossings and Split at Crossings.
The tools stay out of both toolbars as shipped; the All Tools drawer
lists them under the add-on's heading. Commands are addon.pathtools.*;
the existing commands, tools and menus are unchanged.
UPDATE_APP (native builds; craft-update is a native-only dependency) carries our 128 px icon and accent (#e8573f, its colour in ArtCraft Launcher). The updater, the self-update
helper and craft-update's startup prompt all get them through crate::UPDATE_APP; the
prompt draws the icon, the accent and "by ArtCraft" (craft-update's default developer).
craft-update is pinned to storytold/craft-libs main at 1065653e7 (#434).
Clippy fixes for Rust 1.99 in untouched code (same logic):
- crates/svg/src/import/fx.rs
- crates/tools/src/text/tool.rs
Eraser Tool Options' Size takes Fixed or Pressure and a Variation as the
Blob Brush's does: the tool records the pen, and path.eraseRegion outlines
the squashed drag at the pen's widths, stretched back to the tip's angle
and roundness. The pressure parsing and outline move to draw2's common
helpers, shared by both commands.
Blob Brush Tool Options' Size takes Fixed or Pressure and a Variation, as
the brush options' Size does: with Pressure the brush is Size − Variation
wide where the pen presses lightest and Size + Variation where it presses
hardest. The tool records the pen pressure of each point and shows each
step of the drag as wide as the pen pressed there; path.blob takes
[x, y, pressure] points with sizeMode and sizeVariation and outlines the
stroke with that width profile. A stroke without pressure keeps the Size,
and Fixed with no variation stays the default.
https://helpx.adobe.com/illustrator/desktop/paint-and-fill/learn-painting-basics/blob-brush-options-and-best-practices.html
While the center was dragged out, the rays pointed at the pointer, as a
polygon's first corner does, and Shift put them back in their original
orientation. In the reference app they turn by a step for each update
of the drag as the pointer moves up or down, and Shift stops the turn
where it is.
Each update of the center drag in which the pointer's document y grows
now adds 0.1 radian (about 5.73°) to the rays' turn, one in which it
falls takes 0.1 radian away, and one at the same y leaves the turn as
it is. Shift held keeps the turn, and turning goes on from there once
Shift is let go. Space held moves the flare without turning the rays.
General › Constrain Angle no longer sets the turn under Shift.
Docs: docs/mcp.md, docs/target-app-parity.md.
The release that places the rings' end point applied the pointer's last
movement to the end point only, so with Space held the flare changed
shape instead of moving. The release now moves the center by that
movement as well. The progress doc says how Shift and General >
Constrain Angle set the rays' orientation.
The reference app's Flare tool rotates the rays as the center is dragged
out, Shift constrains them to their original orientation, and Space
held moves the shape being drawn. VectorCraft's Flare tool drew the
rays in one fixed orientation and ignored Shift and Space.
shape.flare takes rotation (degrees, clockwise), which turns the rays
about the center and leaves the halo, the center and the rings as they
are. While the center is dragged out, the rays turn with the pointer,
as a polygon's first corner does, and a drag straight up leaves them
unturned. Shift keeps them unturned, or turned by General › Constrain
Angle as a polygon drawn with Shift is. Space held during the center
drag or the drag that places the rings' end point moves the flare at
its current size, and the drag goes on from there when Space is let
go, as with the shape tools.
Docs: docs/mcp.md, docs/target-app-parity.md.
The Selection tool's double-click on nothing (or on art outside the isolated group) leaves isolation mode; Direct Selection's did nothing there. It now does the same.
In typography and Illustrator, Shift+Enter inserts a soft return (forced
line break) rather than ending the paragraph. Text wraps to the next line
without applying paragraph-level spacing (space before/after, first-line
indents), list continuation lines keep their parent item without repeating
markers, and justified text does not stretch lines ending with a soft return.
- Forward active modifier keys for Enter in ui-egui shortcuts so the tool
detects Shift+Enter.
- Type tool inserts U+2028 (LINE SEPARATOR) on Shift+Enter.
- Text shaping and layout treat U+2028 as an invisible zero-advance control
character, breaking the line in point and area type.
- Paragraph spacing and list markers apply once per paragraph as intended.
dotCooCoo