A bounding-box handle dragged with the Selection or Free Transform tool
snapped only with Smart Guides on, and then only to the other objects
and the artboards. View > Snap to Grid, Snap to Pixel, Snap to Point
with Smart Guides off and the ruler guides did not move it, while a
move snaps to all of them.
The corner or side a handle moves now snaps as a dragged point does.
With Snap to Grid on it lines up with the nearest gridline, and with
Snap to Pixel on it lines up with whole pixels. With Smart Guides off,
Snap to Point lands it on the other objects' anchors and on ruler
guides within its distance. With Smart Guides and Snap to Point both
on, it lines up with the ruler guides as well as with the other
objects. Shift still keeps the proportions. Without Alt the opposite
side stays put, and with Alt the box still scales about its center.
Docs: docs/target-app-parity.md.
A Shaper Group keeps its original shapes as a transparent first child.
Clicks skip them outside Construction mode, but a marquee did not: one
drawn over the outline of an original shape whose face the group had
erased selected the group, where nothing is shown. Group Selection's E
marquee selected an original shape that lay inside it, and Direct
Selection's marquee and clicks selected the anchor points of the
original shapes.
The marquee now skips a Shaper Group's original shapes with the same
check clicks use, which moves into shaper_hides, and Direct Selection's
walk over the art it can pick skips them too. In Construction mode, with
the original shapes isolated, the marquee still selects them and Direct
Selection still selects their anchor points.
Docs: docs/shaper.md, docs/target-app-parity.md.
- Prefer the anchor over a short handle within tolerance, like hit_handle.
- Pick the nearest eligible spine point and handle.
- Constrain Shift handle drags to 45-degree steps round the anchor.
- Hide spine handles with handles_multiple off, in overlays and picking.
A click with the Group Selection tool on a compound path selects the path
under the pointer (its outline within the pick tolerance, else the innermost
path whose area holds the click), so the outer shape and each hole can be
selected on their own; Shift-click adds another, and a click on a selected
path adds the compound path, as a click on a group member climbs to its group.
A path selected this way is an object of its own for Move, Transform, Rotate
and the other transforms, as it already was inside an isolated compound path:
the hole of a ring moves without the ring. Paint and the other commands still
go to the compound path, which holds the paint.
Docs: docs/target-app-parity.md, docs/ui-parity.md.
# Conflicts:
# docs/target-app-parity.md
The Print Tiling tool's press and print.tiling.set without `artboard`
decided which artboard a point is on with Rect::contains, which leaves
out the right and bottom edges. A press exactly on an artboard's right
or bottom edge picked no artboard when no other artboard holds that
point, so the drag did not snap to that artboard's edges. An origin
there was measured from the first printed artboard: with artboards at
0 to 300 pt and 300 to 600 pt, an origin on the second one's right edge
was saved as x 600 instead of 300.
Both now count the edges as Document::art_on_artboard does, within a
millionth of a point.
Rearrange All Artboards, Select › All on Active Artboard (for objects
with no area), Copy's source artboard for Paste in Place, Align to
Artboard without an index, Crop Image, the Crop Image tool, Place with
`at`, CSS positions and a filter plug-in's artboard decided whether a
point or an object's center is on an artboard with Rect::contains,
which leaves out the right and bottom edges. A line along an artboard's right or
bottom edge was on no artboard: Rearrange left it behind, and All on
Active Artboard did not select it. Document::art_on_artboard counts
art flush with those edges (#890).
They now count the edges as art_on_artboard does, within a millionth
of a point. On an edge two artboards share, the artboard to the right
of it or below it still holds the point. All on Active Artboard
selects a line on a shared edge from either artboard. A press exactly
on a right or bottom edge now picks that artboard, and the Artboard
tool's cursor shows Move there.
The Selection and Direct Selection tools drew the start, center and end
brackets of every selected type on a path, and hit-tested each of
them, however large the selection was: 32,768 selected type on a path
objects added 1,310,720 vertices to the frame's mesh, 40 for each
object. The PDF importer makes type on a path for curved text lines,
so selecting all of a large PDF can reach that size.
With more than 10,000 type on a path objects selected, the tools now
neither draw nor hit-test any bracket: a press where a bracket would
be does not start a bracket drag, and the pointer does not change to
the bracket cursor there. The tools draw 10 points for each object's
brackets, so 10,000 objects take 100,000, the same number as the
canvas's limit on the anchor points it outlines. The tools crate has
its own constant with the same value.
Docs: docs/target-app-parity.md.
In a CMYK document, an RGB color from the Eyedropper, a hex value or
paint.setFill was stored as CMYK by the profile-free formula
(k = 1 - max(r, g, b)), not through the color settings. RGB 83/170/223
came in as C63 M24 Y0 K13. A CMYK image was sampled through the RGB its
decoder shows, so its inks came back only when the formula happened to
round-trip them.
paint_from now converts an RGB color into a CMYK document with
Cms::convert and the settings' intent, as Document Color Mode and Swatch
Options already do. This covers paint.setFill and paint.setStroke,
gradient stops, swatch.new {color} and the Eyedropper. With Generic CMYK,
83/170/223 now separates to C59 M12 Y3 K0, and #ff0000 now separates to
C0 M97 Y100 K0 instead of C0 M100 Y100 K0. keepModel: true still keeps
RGB. paint.sampleColor with a stop stores the color the same way.
The Eyedropper samples a CMYK image's ink amounts (a four-component
JPEG, or an 8- or 16-bit chunky CMYK TIFF) and returns them unchanged
(ImageBlob::sample_cmyk_object), also in an RGB document. It takes an
RGB image's sRGB pixel into the working RGB space, as the screen color
sampler does, so the picked color shows as the pixel when the working
space is not sRGB.
Docs: docs/mcp.md, docs/target-app-parity.md.
View › Rulers › Change to Global Rulers (Cmd+Alt+R) was a disabled
stub: the rulers always counted from one document zero point. The
reference app's public help describes two modes: artboard rulers, the
default, count from the active artboard's top-left corner, and each
artboard can have its own zero point; global rulers keep one zero point
for the whole document whichever artboard is active.
https://helpx.adobe.com/illustrator/desktop/measure-and-align/grids-and-guides/about-rulers.htmlhttps://helpx.adobe.com/illustrator/desktop/measure-and-align/grids-and-guides/use-rulers.html
`view.globalRulers {global?}` switches the mode (toggle by default),
undoable and saved with the document (`rulers`). The menu item reads
Change to Artboard Rulers while global rulers are on. A new document has
artboard rulers; a file saved before the mode existed has no `rulers`
key and opens with global rulers, so it measures as it did.
With artboard rulers, dragging the ruler corner sets the active
artboard's zero point, kept as an offset from its corner
(`artboard_ruler_origins`, by artboard id) so it moves with the
artboard, and double-clicking the corner resets it. The global zero
point (`ruler_origin`) stays separate. `document.rulerOrigin`,
`document.setRulerOrigin` and `document.resetRulerOrigin` take
`artboard`; `Document::ruler_origin_for` is the zero point with an
artboard active, falling back to the corner or the global one when a
stored value is out of range.
The rulers, the Transform, Properties and Control bar X/Y, the Info
panel's X/Y (which ignored the zero point before), ruler-guide
readouts and Shift ruler-tick snapping all count from that zero point:
the view's active artboard reaches the tools through `ViewInfo` and
`ToolContext::ruler_origin`. Command coordinates stay absolute.
Tests: engine/tests/ruler_origin.rs (default mode, per-artboard origin
following its artboard, global origin apart, toggle and undo, save and
legacy files, out-of-range values), ui-egui/src/tests_ruler_origin.rs
(position fields and corner drag on the active artboard, menu label and
shortcut), tools/src/rulerguide.rs (guide readouts and tick snapping).
Tests written for the single global zero point now turn global rulers
on first. "Change to Artboard Rulers" is translated in every catalog.
Docs: docs/ui-parity.md, docs/gaps.md (G7), docs/target-app-parity.md,
docs/mcp.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01U2JbUtM4MkzWLm9FgYiEsq
In a rotated view the resize and rotate cursors were the ones for an
unturned view. With the view turned 90°, the right-middle handle of a
selection's bounding box shows at the middle of the box's bottom edge
and drags up and down, but its cursor was the left-right arrow. This
affected the Selection, Free Transform, Artboard, Slice Selection, Crop
Image, Perspective Grid and Perspective Selection tools, ruler guides,
and the spread handle of a freeform gradient.
Now each of these cursors turns with the view to the nearest 45°. The
Selection tool and the Perspective Selection tool turn the handle's
direction by the view's angle before they round it to a cursor.
ToolContext::view_angle reads the view's angle from the screen frame,
and Cursor::turned turns a resize or rotate cursor by it. The new
Cursor::rotate_about_in_view turns the pointer's direction from the
center by the view before it picks one of the rotate cursor's eight
directions. Cursor::rotate_about keeps its signature and behavior. At
0° every cursor is as it was.
Docs: docs/target-app-parity.md.
The toolbar listed the Touch Type tool (Shift+T), but choosing it did
nothing. The reference app's Touch Type tool moves, scales and rotates
one character of live type by dragging the handles of a box around it.
A click with the tool now selects one character and shows a box around
it. Dragging the box or its lower-left handle moves the character along
its line and up or down. The upper-left handle scales it vertically,
the lower-right handle scales it horizontally, the upper-right handle
scales it proportionally, and the upper-middle handle rotates it. A
character rotated by up to about 84 degrees follows the pointer too.
Near a quarter turn, a drag moves it only along its line. Escape
cancels a drag, and otherwise lets go of the character.
Each drag is one text.touchType command and one undo step. It sets the
character's baseline shift, scales and rotation, and moves it along its
line by changing its own kerning and the kerning of the character
before it, within the kerning range. The characters after it stay
where they are. Where the font kerned the character with its
neighbors, the two kerning values also keep the character in place
when it is only raised, scaled or rotated. The characters after it
stay where they were, or move by the change in its width when it is
scaled. The first character of a line and a right-to-left character
move only up and down. The type stays editable.
Docs: docs/mcp.md, docs/target-app-parity.md, docs/type-parity.md.
Shift pressed while dragging a segment had no effect on the curve:
Direct Selection's curved-segment and spine-segment drags, the Anchor
Point tool and the Pen with Alt sent the pointer offset alone, and the
segment bent freely. The reference app keeps the handles in the
perpendicular direction and of equal length while Shift is held.
path.reshapeSegment and object.blend.spine.reshapeSegment take
perpendicular (default false, which keeps today's behavior). With it,
both of the segment's handles stand at right angles to the line between
its anchors, on the same side and at the same length, and the point at
t lies as far from that line as the moved point does. A smooth anchor
at either end stays smooth, as it does in a drag without perpendicular,
and a segment whose anchors coincide bends as it does without
perpendicular. With Direct Selection, Shift pressed once a curved
segment's drag has started sends perpendicular; Shift held at the press
still toggles the path's selection, as before. Direct Selection's
spine-segment drag and the Anchor Point tool's segment drag send Shift
as perpendicular too, so the Pen with Alt does as well. A straight
segment dragged with Direct Selection already moves at 45° steps with
Shift.
Docs: docs/mcp.md, docs/target-app-parity.md.
A double-click on a ruler guide with the Selection, Direct Selection or
Group Selection tool did nothing, whatever keys were held. A guide could
be released only with View › Guides › Release Guides.
With the Selection, Direct Selection or Group Selection tool, a
double-click with Cmd/Ctrl and Shift held now runs view.guides.release
on the ruler guide under the pointer (index) or, when no ruler guide
is there, on the guide path under it (ids). Nothing is released while
guides are hidden or locked, and a double-click without both keys does
what it did before.
Docs: docs/mcp.md, docs/target-app-parity.md.
A corner's radius was capped at half its shorter side whatever its neighbours did, so one corner of a 100 pt square rounded alone stopped at 50 pt. Each corner now rounds until its cut reaches the cuts its neighbours ask for: the whole side when the neighbour is square, halfway when both ask for more. The corner widget drag, the red limit outline and CSS border-radius export follow the same limit.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The snap ring on an anchor (or a dot on a line) and the rubber band now follow the snapped point, so both measured points visibly land on anchors.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Shift click already snapped the second point to 45-degree steps, but the dashed line from the first point followed the raw pointer, so the constraint looked absent until the click.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The overflow marker was drawn by the Type tools only, so with the Selection tool a text box smaller than its text showed no sign that text was hidden. Session::overlays now adds the marker of every selected area type and type on a path that overflows, unless a Type tool is active (it draws its own). The verdict is cached per object and font generation.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Node editing as the public manual describes it: Direct Selection's anchor squares (hollow
or filled), Reshape Segment over a curved segment, Group Selection's plus (also Direct
Selection with Alt), the arrow hollow while a drag snaps, and Alt-copy arrowheads. The
Anchor Point caret, the Curvature pen and Free Transform's side-shear arrows (ShearH,
ShearV) are drawn in code. Lasso, the freehand, symbolism and other tools return cursors
of their own that borrow their old look until drawn (Cursor::stand_in).
crates/tools/src/cursors.toml lists every Cursor value, when it shows and its hotspot,
for whoever draws them; `cargo xtask cursors` (in ci) warns about a missing, unknown,
repeated or incomplete entry and never fails. The busy cursor is listed as missing (G1).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A double-click on an object or group fits one artboard to the visible bounds and does not open Artboard Options. The second click does not fit another artboard. Other artboards stay. Double-clicking empty artboard space still opens Artboard Options. Double-clicking the name drawn above an artboard renames it.
A Blob Brush stroke merged with every touching closed path of its
color that had no stroke, and the blob it drew or merged into was
always left selected. The Blob Brush Tool Options had Size only.
The Blob Brush Tool Options now have Keep selected and Merge only
with selection, both off by default. A blob that a stroke draws or
merges into is no longer left selected unless Keep selected is on,
and the rest of the selection stays as it was. While Merge only with
selection is on, a stroke merges only with selected blobs, and with
nothing selected it draws a new blob. The options persist like the
tool's Size, and path.blob takes keepSelected and mergeOnlySelection,
both false by default. Keep selected stays on by default for the
Pencil and Paintbrush.
Docs: docs/target-app-parity.md, docs/control-protocol.md.
The Selection tool shows two pie widgets just outside a selected live
ellipse while the bounding box shows: one at the Pie Start Angle and
one at the Pie End Angle. Dragging one sets its angle to the angle of
the outline's point that lies in the direction of the pointer from the
ellipse's center, in one undo step, through `object.setLiveShape`'s
`pieStart` or `pieEnd`. Double-clicking one makes the ellipse whole
again (0° to 360°). Where the two widgets coincide, as on a whole
ellipse, a press takes the End widget.
Docs: docs/target-app-parity.md, docs/ui-parity.md.
A Selection tool marquee selected every object it touched, a Group
Selection marquee selected the anchors inside it, and E pressed during
the drag did nothing. Now E switches either marquee to selecting only
the objects that lie entirely inside it, measured by their geometric
bounds, and E pressed again switches it back. Each marquee starts in
the default mode.
- The Selection tool selects a group only when the whole group lies
inside. Group Selection selects the objects inside groups, each as a
whole object. Shift still toggles. Direct Selection does not take E.
- The ruler guides the marquee selects with the art are limited the same
way: an artboard guide is selected when its whole length lies inside,
and a canvas guide is not selected.
- Tools receive letter keys as ToolKey::Letter. While a tool is busy, the
desktop app sends it each press of a letter it claims, without Cmd,
Ctrl or Alt and without key repeats, and headless press_key sends a
claimed letter the same way. With nothing dragged, press_key {key: "e"}
still chooses the tool bound to E.
Docs: docs/mcp.md, docs/target-app-parity.md.
A Shaper Group had no arrow widget for switching between Face Selection
and Construction mode.
With the Shaper or Selection tool active, a selected Shaper Group, or a
group with one of its faces selected, now shows an arrow beside the
middle of the right side of its source shapes' bounds. A click on it
isolates the source shapes (object.isolate). A second click leaves
isolation with the group selected (object.exitIsolation). The arrow
points right in Face Selection mode and left in Construction mode.
In Construction mode a Shaper click selects an original shape of the
isolated group. Before, it selected the whole group outside the
isolation, and shaper.select with source could pick an original of
another Shaper Group lying above it.
Docs: docs/shaper.md, docs/target-app-parity.md.
Make and Edit choose the Intertwine tool: hovering highlights the overlap
area under the pointer, a click swaps which object is on top there, and a
path drawn around overlaps (Shift: a rectangle) arranges every overlap
inside it; Esc or Enter goes back to the tool chosen before. The overlap
faces move to vectorcraft-tools, shared by the tool and the command.
Clicks inside a raised area pick the member drawn on top there, the
Object menu gets the Intertwine submenu, and the new labels and the
predicate message are translated in the complete catalogs. docs/gaps.md
records what landed under G13.
The Curvature tool built its curve as a uniform Catmull-Rom: both handles of a
smooth point a sixth of the chord between its neighbours, the ends of an open
path without handles. Uneven spacing overshot or looped, a J or U from three
points bent sharply at the middle with straight legs, and the end segments
looked flat.
- `curvature_spline` (draw2.rs) makes each stretch of three points follow the
circle through them: a smooth point's tangent is that circle's
(`smooth_handles`), each handle `chord / (3 cos²(α/2))` long, α between
handle and chord capped at 90° (`arc_handle`). The ends of an open path
mirror their neighbour's tangent in their chord (`end_handle`). A turn
tighter than 30° (`TIGHT_TURN`) shortens its handles, so a narrow V comes to
a point. Degenerate points become corners. `path.curvature` and the rubber
band use it.
- `catmull_rom` is unchanged for the Pencil and Paintbrush fitting.
- `bend_last` (from: smooth), `curvature_move` on a smooth point, the point
`curvature_insert` adds on a straight segment, and `path.convertAnchor` to
smooth without x/y (`curvature_smooth`) use the same rule.
- `curvature_extend` gives the new end its end handle unless Alt-clicked
(`corner` param on `path.curvatureEdit`).
- Neighbours of a point dragged on an existing path keep their tangents (a
Pen-drawn shape isn't reshaped); the path being drawn re-curves throughout.
When entering text edit mode via double-click from a selection tool
(Selection or Direct Selection), pressing Escape now returns to the specific
tool used before double-clicking (rather than always falling back to
Selection).
Additionally, when editing text while in isolation mode (such as when drilling
into nested groups with the Selection tool), pressing Escape exits text editing
while keeping isolation mode active; a second Escape press is required to exit
isolation mode.
- Record the previous tool in TypeTool on double-click from canvas.
- Return to prev_tool on ToolKey::Escape, consuming the key in shortcuts when claimed.
- Add unit test in vectorcraft-tools verifying Escape returns to prev_tool.
- Add integration tests in vectorcraft-ui-egui verifying Escape returns to Direct
Selection and that isolation mode persists until a second Escape.
- Update docs/target-app-parity.md and ROADMAP.md.
With the Direct Selection tool ("white arrow", shortcut 'a'), double-clicking
a text element (either standalone or nested inside a group) now switches to
the Type tool and immediately positions the caret at the clicked character,
matching the behavior previously introduced for the Selection tool in #284.
- In DirectSelectionTool::pointer, detect double-click hits on NodeKind::Text
when !self.group and emit Action::SwitchTool("type").
- Group Selection (group: true) retains its existing group cycling behavior.
- Add unit test in vectorcraft-tools verifying tool switch on both standalone
and grouped text.
- Add headless egui integration test in vectorcraft-ui-egui verifying tool switch,
caret positioning, and inline editing without triggering shortcuts.
- Update docs/target-app-parity.md and ROADMAP.md.
The Pen's pointer showed the new-path asterisk before the first anchor
and also while a path was being drawn, where a click adds the path's
next anchor. A new Cursor::PenDrawing, the pen nib without a badge, now
shows there. The close, convert and join badges still show over the
first anchor, the last anchor and another open path's end. The asterisk
shows only where a click starts a new path.
The Continue, Add and Delete badges now also show after another path
was selected while the Pen was still drawing (for example with a
Cmd-click). A click there already continued the path or added or
deleted an anchor, but the pointer showed the asterisk.
A Pencil or Paintbrush stroke always left the path it drew or continued
selected. The reference app's Pencil and Paintbrush options have Keep
selected for this, and VectorCraft's Tool Options had no such row.
The Pencil and Paintbrush Tool Options now have a Keep selected
checkbox, on by default, which keeps today's behavior. When it is off,
a new path is not selected and the selection stays as it was, and a
continued path is removed from the selection while the rest stays. The
stroke is still one undo step. The option persists like the tools'
other options, and path.freehand and brush.freehand take keepSelected.
Docs: docs/target-app-parity.md, docs/ui-parity.md, docs/control-protocol.md.
The Control bar had no isolation controls. In isolation mode it now
shows an Exit Isolation Mode button (`object.exitIsolation`), except
while a pattern is edited: the isolation bar's Done and Cancel end
that edit. Outside isolation mode, with one group, compound path,
path, image, mesh or placed file selected, it shows an Isolate
Selected Object button (`object.isolate`). After a Direct Selection
click on a path inside a group, the button isolates that path. An
envelope's contents get no button: for them the Control bar shows the
envelope's Edit Envelope and Edit Contents buttons.
The button offers the kinds of object that the Selection tool's
double-click isolates. The double-click's check moves unchanged into
`vectorcraft_tools::select::isolates`, and both use it.
Docs: docs/target-app-parity.md.
Drag out from a segment, corner, circle or arc to place a dimension; plain clicks pick two points or two lines. Radial dimensions on perfect arcs, picas, Away/Between and Left/Center/Right text placement. The Properties panel edits a selected dimension, with Apply to All (dimension.applyToAll) and Set as Default. Dimension Selected Paths, the Arc/R/Ø prefixes and the custom defaults are left out. The refresh returns at once in documents without dimensions (Document::dimensions); a linked dimension moved on its own keeps its place; modes, units, line types, arrows and text placement are enums; the tool has its own icon.
dotCooCoo