Compare commits

..
Author SHA1 Message Date
FredAppsandClaude Opus 5.5 3464b1d67f Refit credits tables on what they measure, not the fitted widths
Comparing the fitted widths missed the case it was meant for. Name is the
only growing column, so a longer name takes its extra width from the
spare room and the fit comes out the same: a dragged Name width stayed,
clipping the longer name.

It could also drop dragged widths by accident. The fit comes from the
available width inside the scroll area, which scrolling can nudge, so
scrolling a widened table could reset it.

The table now compares the natural widths and the clip rect's width,
which scrolling does not move.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 18:44:13 +01:00
FredAppsandClaude Opus 5.5 27b6d34a3a Let every credits column be dragged, and refit changed tables
The last column was egui's remainder column, which has no drag handle, so
it could only be resized from the edge before it. It is now an ordinary
column with its own handle.

A table keeps its column widths, so switching to a longer name left the
Name column at its old width and clipped the text. The table now goes
back to the opening fit whenever that fit changes: a longer widest cell
or a resized window. Dragged widths are dropped at that point.

fit_widths could overflow the room when one column hit the minimum,
because the other columns did not take up its share. Columns now give
way in proportion to their width above the minimum.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 17:18:05 +01:00
FredAppsandClaude Opus 5.5 99e0f0aef3 fix(ui): About credits tables fit without side-scrolling and their columns resize
The Contributors table and the Models table were egui Grids inside a
two-way scroll area: they opened wider than the dialog, so they scrolled
sideways, and Company and Model sat almost touching. Both are now
egui_extras tables. Each column opens at the width of its header and widest
cell, the spare width goes to the text columns (Name; Company and Model),
and every column edge can be dragged. Widening a column grows the table
like a spreadsheet, and only then does it scroll sideways; the header stays
put while the rows scroll. Counts and dates are right-aligned and every
cell is vertically centred.

The sorted column stays highlighted and its direction shows on the
toolbar's sort-order button, so headers no longer reserve room for an
arrow. The opening widths come from fit_widths, a pure function with unit
tests that a fitted table fills its room exactly and that only the text
columns give way when room is short.

The About dialog opens 820 points wide, so every column fits at its natural width.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 21:55:58 +01:00
FredApps b26ab2b25c Merge pull request #576 from colliderman/fix/edit-track-header-alignments
fix(ui): center track names in edit window and remove unnecessary spacing for Solo and Mute buttons in Master tracks
2026-11-03 21:01:19 +01:00
Cody Gilchrist 76f58fcb81 fix(ui): add hover tooltip for overflowing track names and assert exact center position in test 2026-11-03 12:29:37 -05:00
Cody Gilchrist 6a4c055094 fix(ui): preserve start of long track names in edit headers 2026-11-03 11:47:04 -05:00
CodyG_NeuralDSP d5564bce05 fix(ui): position master track view selector directly under track name 2026-11-03 11:00:53 -05:00
CodyG_NeuralDSP 87ad11cccc fix(ui): center track names in edit window track headers 2026-11-03 10:58:53 -05:00
Brandon Thomas b11ffe73ae Merge pull request #1280 from TheGalitube/fix/1252-tracks-nested-in-a-folder-are-no
Indent tracks nested in folders
2026-11-03 10:05:11 -05:00
Brandon Thomas f91b4173b6 Merge pull request #1281 from rahul05ranjan/toolbar-link-icons
Toolbar: distinct link icons (#1262) and an Insertion Follows Playback toggle with its own icon (#1263)
2026-11-03 10:05:06 -05:00
Brandon Thomas 98c3a307c3 Merge pull request #1316 from JonRC/fix/plugin-load-error-reason
Plugin hosts: keep the system's reason when a plugin binary fails to load
2026-11-03 10:05:01 -05:00
Brandon Thomas 6492b5f27e Merge pull request #1286 from Silvertree2010/fix/1260-zoom-in-t-doesn-t-use-the-edit-c
Keep the edit cursor as the zoom reference when it is off-screen
2026-11-03 10:04:56 -05:00
Brandon Thomas 9c202d6f17 Merge pull request #1290 from JonRC/fix/1289-offline-render-mode
Tell hosted plugins when they render offline (VST3 kOffline, clap.render)
2026-11-03 10:04:51 -05:00
Brandon Thomas 44b864ffaf Merge pull request #1305 from JonRC/fix/1304-cli-logger
soundcraft-cli: print logged warnings and errors to stderr
2026-11-03 10:04:47 -05:00
Brandon Thomas 035de82c84 Merge pull request #1278 from TheGalitube/fix/1257-alt-click-doesn-t-delete-a-marke
Delete markers on Alt-click
2026-11-03 10:04:42 -05:00
Brandon Thomas 181f329ec8 Merge pull request #1279 from TheGalitube/fix/1255-stereo-track-input-shows-a-mono
Show stereo input pairs for stereo tracks
2026-11-03 10:04:37 -05:00
Brandon Thomas 5ba9f9d7b8 Merge pull request #1291 from ljkx/new-send-opens-send-window
A new send opens its Send window, so its fader is on screen right away
2026-11-03 10:04:32 -05:00
Brandon Thomas c15682a088 Merge pull request #1302 from JonRC/fix/1301-audiosuite-hosted-ids
audiosuite.process: say it takes built-in plugin ids, and why hosted ones are refused
2026-11-03 10:04:28 -05:00
Brandon Thomas 0d253b6d8c Merge pull request #1300 from JonRC/fix/1296-bounce-bext
Stamp WAV bounces with their timecode position (BWF bext TimeReference)
2026-11-03 10:04:22 -05:00
Brandon Thomas c0f2f7dc87 Merge pull request #1314 from JonRC/fix/convert-keeps-bext
convert: keep a BWF source's bext chunk
2026-11-03 10:04:16 -05:00
Brandon ThomasandClaude Opus 5.5 f99407fb1f Leave Insertion Follows Playback's N to the Edit window's shortcut handler
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 09:56:42 -05:00
Brandon ThomasandClaude Opus 5.5 636454e639 Name the missing entry point in the not-a-plugin errors on every platform
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 09:56:35 -05:00
Brandon ThomasandClaude Opus 5.5 7546ab992b Cap the folder indent at eight levels and test against the track's own folder
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 09:56:05 -05:00
Brandon ThomasandClaude Opus 5.5 f86b077cdf Test that an off-screen edit cursor lands on its fixed column
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 09:53:19 -05:00
Dylan M. Taylor aa250cc1d7 Clip gain to volume: index envelope lookups (#1309)
Converting clip gain to volume (and baking volume into clip gain)
evaluated the clip's gain envelope by walking it from the start for
every breakpoint being converted, so a large envelope in an opened or
imported session cost envelope points squared and blocked the engine.

Build a running-maximum index over the envelope once per clip and
binary-search it. It returns exactly what the walk returned, including
for envelopes stored out of order.
2026-11-03 07:44:31 -05:00
Dylan M. Taylor 351b9d3a55 Tempo map: binary-search tempo segments in tick/sample conversions (#1297)
* Tempo map: index tempo segments so tick/sample conversions are O(log n)

Every tick<->sample conversion walked all earlier tempo changes, so code
that converts many positions (MIDI import/export, the tempo ruler, score
layout, MIDI scheduling and controller chasing on the audio thread)
cost positions x tempo changes. A session or MIDI file with many tempo
changes and many notes or tracks could stall the engine or the audio
callback.

TempoMap now keeps the elapsed time at each tempo change (rebuilt on
every edit and on deserialize, never serialized) and binary-searches
the segment. MIDI scheduling also skips notes whose on and off both
fall outside the block before converting them.

* Tempo map: index a file's ticks with saturating subtraction
2026-11-03 06:18:44 -05:00
Dylan M. Taylor da02c19fcc Bundles: refuse entries that share their data (#1303)
Bundle entries are stored, so the files read out of one can only
outgrow the bundle when several entries point at the same bytes. A
small bundle naming one payload thousands of times was copied out once
per name, up to the 1 GiB total limit, in the browser. Check the
archive for overlapping entry data before reading any entry.
2026-11-02 23:33:19 -05:00
Dylan M. Taylor 64540f109b Mixer: compute cyclic aux depths in one pass per hop (#1306)
When the aux/folder routing has a cycle, processing_order sorted the
auxes by a bounded feeder depth recomputed inside the sort key: each
evaluation re-searched every aux's output and sends against a growing
list of inputs, for up to eight hops, on every comparison. A session
with many auxes sharing buses made that cubic during audio sync.

Compute the same capped depth for every track at once: per hop, collect
the buses written by auxes reached so far, then mark the tracks reading
them. The result matches the old search (tested against it on a mixed
graph with cycles) and the sort uses it by lookup.
2026-11-02 23:27:09 -05:00
Dylan M. Taylor 0af1ad909e Mixer: match automation lanes to insert parameters in one merge (#1299)
apply_params searched all of the track's automation lanes for every
stored insert parameter on every block, so a session with many
parameters and many lanes multiplied the two on the audio thread.
Collect the slot's lanes once per block, order them by parameter name
(keeping the first lane per name, the one the old search found) and
walk them alongside the sorted parameter map. The lane list reuses a
scratch buffer kept on the plugin slot.
2026-11-02 23:25:34 -05:00
JonRC 7587130d59 convert: keep a BWF source's bext chunk
convert wrote every file with bwf: None, so converting a Broadcast Wave file
dropped its bext: description, originator, dates and the time reference that
places it on a timeline. Pass the decoded bext on. The time reference counts
samples, so with --rate it moves to the output rate.
2026-11-03 01:19:13 -03:00
JonRC e4f0599a2a Plugin hosts: keep the system's reason when a plugin binary fails to load
libloading 0.9 prints only "dlopen failed" ("dlsym failed", "LoadLibraryExW
failed") and keeps the dlerror text or the Windows error as the error's source.
The CLAP and VST3 loaders formatted the error alone, so a plugin built for a
newer glibc was reported as "dlopen failed" with no reason. Append the source.
2026-11-03 01:19:13 -03:00
Dylan M. Taylor 17d3f00700 MIDI: index controller dedup by channel and kind (#1298)
* MIDI: index controller dedup by channel and kind

Remove Duplicate Notes rescanned every controller already kept at the
same tick for each incoming one. A session whose sequence holds one tick
with many distinct channel/controller pairs made that quadratic and
blocked editing. Track where each channel+kind sits at the current tick
in a map instead; the last event per key still wins.

* MIDI: tag dedup index entries with their tick instead of clearing per tick

Clearing the map on every tick change cost O(capacity) per tick after a
dense tick. Store the tick with each entry and treat entries from an
earlier tick as absent. Add an oracle test comparing against the
previous per-tick rescan on mixed-tick input.
2026-11-02 22:51:02 -05:00
JonRC f46ea7d70c soundcraft-cli: print logged warnings and errors to stderr
The CLI installed no logger, so every log::warn! and log::error! was
dropped: a plugin that failed to load just vanished from
engine.clap_plugins with no reason. A small logger now writes warnings
and errors to standard error as `warning: <message>` and
`error: <message>`, like the CLI's own errors. The level is fixed:
RUST_LOG stays a desktop app variable.

Fixes #1304.
2026-11-02 23:48:01 -03:00
JonRC 1403bbc4d3 audiosuite.process: say it takes built-in plugin ids
Its help said `<plugin id>`, but it only runs built-in plugins, and a
hosted id (clap:, vst3:, au:) failed as "unknown process". The help now
says built-in plugin id, and a hosted id gets an error saying AudioSuite
runs built-in plugins only.

Fixes #1301.
2026-11-02 23:42:08 -03:00
JonRC b0793ca875 Stamp WAV bounces with their timecode position (BWF bext)
Bounces passed no bwf to the encoder, so mix and stem WAVs had no bext
chunk and post tools placed them at zero. Bounce::new now stamps them
with TimeReference = the session's timecode start plus the bounce start,
in samples since midnight, as other DAWs do. A caller's own bwf wins;
AIFF and FLAC have no bext and are unchanged.

Fixes #1296.
2026-11-02 23:36:15 -03:00
Dylan M. Taylor 1c350101bc clap-host tests: load plugins only from a freshly created private temp directory (#1295)
* clap-host tests: scan a freshly created private directory for the garbage-file test

The test reused a PID-named directory under the shared temp dir after ignoring a
failed cleanup, then loaded every .clap candidate in it. Another local account
could pre-create that directory and plant a native library that the test runner
would load. Create the directory exclusively (mode 0700 on Unix) and fail
instead of reusing one that already exists.

* clap-host tests: create the garbage-file test directory beside the test binary, not under TMPDIR
2026-11-02 21:30:40 -05:00
ljkx 36d42e0136 Test a new send's Send window end to end, and tidy send_route_menu
An integration test creates send C while send A's window is open: the window moves to the new send
with its fader on screen, and undoing the send closes it. send_route_menu now opens the window only
after the send command succeeds, without the extra bool, and its comment says reassignment leaves
the window alone.
2026-11-03 01:55:52 +01:00
ljkx 04dab602c7 A new send opens its Send window, so its fader is on screen right away (#1269)
Picking a destination for an empty send slot, or making one with new bus..., now opens that send's Send window, as in Pro Tools. Moving an existing send to another bus leaves the window as it was.
2026-11-02 19:38:53 +01:00
JonRC 576ff36f61 Tell hosted plugins when they render offline
Bounces ran VST3 plugins with processMode kRealtime and never set
clap.render, so plugins that work differently offline never could.
Offline renders now create their plugins with Plugin::set_offline(true):
VST3 plugins get kOffline in setupProcessing and in every process call,
and CLAP plugins with clap.render are set to CLAP_RENDER_OFFLINE.
Playback stays realtime.

Fixes #1289.
2026-11-02 12:34:32 -03:00
NetterSilverandClaude Haiku 5.5 4b06407dae Keep the edit cursor as the zoom reference when it is off-screen
Fixes #1260

Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-11-02 15:57:40 +01:00
rahul05ranjan 1a95692f50 Toolbar: distinct link icons, an Insertion Follows Playback toggle, and its N shortcut in the menu
The two link toggles shared the "link" icon (#1262), and Insertion Follows
Playback, although it works with N, had no toolbar button of its own and no
shortcut in the Options menu (#1263).

- icons: "link_track" draws the chain under two track rows so the track link
  reads apart from the timeline link; "insertion_follows" draws the insertion
  line and the playhead arrow it follows.
- toolbar: the option toggles move into option_toggles, which gains the
  insertion-follows entry between the links and Mirrored MIDI, as in Pro Tools.
- options: the Insertion Follows Playback menu item shows N, the key it uses.
- test: option_toggles_have_distinct_icons fails when any two option toggles
  share an icon (it fails on the old "link" pair).

Fixes #1262, fixes #1263

Co-authored-by: rahul05ranjan <11793455+rahul05ranjan@users.noreply.github.com>
2026-11-02 12:15:55 +00:00
Max MittelstädtandGPT-5.6-Luna 7dfa7e470f Indent tracks nested in folders
Fixes #1252

Co-Authored-By: GPT-5.6-Luna <noreply@openai.com>
2026-11-02 08:25:43 +00:00
Max MittelstädtandGPT-5.6-Luna 8f7eb4d777 Show stereo input pairs for stereo tracks
Fixes #1255

Co-Authored-By: GPT-5.6-Luna <noreply@openai.com>
2026-11-02 08:23:34 +00:00
Max MittelstädtandGPT-5.6-Luna ffc035ba29 Delete markers on Alt-click
Fixes #1257

Co-Authored-By: GPT-5.6-Luna <noreply@openai.com>
2026-11-02 08:23:18 +00:00
14 changed files with 402 additions and 366 deletions
-1
View File
@@ -41,4 +41,3 @@ jobs:
AZURE_SIGNING_ENDPOINT: ${{ secrets.AZURE_SIGNING_ENDPOINT }}
AZURE_SIGNING_ACCOUNT: ${{ secrets.AZURE_SIGNING_ACCOUNT }}
AZURE_CERT_PROFILE: ${{ secrets.AZURE_CERT_PROFILE }}
LINUX_SIGNING_KEY: ${{ secrets.LINUX_SIGNING_KEY }}
Generated
+52 -23
View File
@@ -1422,6 +1422,19 @@ dependencies = [
"winit",
]
[[package]]
name = "egui_extras"
version = "0.37.0"
source = "git+https://github.com/storytold/egui.git?rev=6d518fc799681571963842f95b55a6b68431b15a#6d518fc799681571963842f95b55a6b68431b15a"
dependencies = [
"ahash",
"egui",
"enum-map",
"itertools 0.15.0",
"log",
"profiling",
]
[[package]]
name = "egui_glow"
version = "0.37.0"
@@ -1475,6 +1488,26 @@ version = "1.1.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "66b7e2430c6dff6a955451e2cfc438f09cea1965a9d6f87f7e3b90decc014099"
[[package]]
name = "enum-map"
version = "3.1.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "d4532960034c15ba2f55e9eee631040ecc473c32e6c4b200828c759840f13a06"
dependencies = [
"enum-map-derive",
]
[[package]]
name = "enum-map-derive"
version = "1.0.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "7127272f64b3e098f7d81f350d672081b879bff896d219c42370dc858b1af9ff"
dependencies = [
"proc-macro2",
"quote",
"syn 3.0.9",
]
[[package]]
name = "enumflags2"
version = "0.7.12"
@@ -4297,7 +4330,7 @@ dependencies = [
[[package]]
name = "soundcraft"
version = "0.17.1"
version = "0.17.0"
dependencies = [
"chrono",
"clap",
@@ -4321,7 +4354,7 @@ dependencies = [
[[package]]
name = "soundcraft-au-host"
version = "0.17.1"
version = "0.17.0"
dependencies = [
"log",
"serde",
@@ -4331,7 +4364,7 @@ dependencies = [
[[package]]
name = "soundcraft-audio-io"
version = "0.17.1"
version = "0.17.0"
dependencies = [
"log",
"proptest",
@@ -4343,7 +4376,7 @@ dependencies = [
[[package]]
name = "soundcraft-automation"
version = "0.17.1"
version = "0.17.0"
dependencies = [
"clap",
"log",
@@ -4356,7 +4389,7 @@ dependencies = [
[[package]]
name = "soundcraft-clap-host"
version = "0.17.1"
version = "0.17.0"
dependencies = [
"clap-sys",
"libloading 0.9.0",
@@ -4369,7 +4402,7 @@ dependencies = [
[[package]]
name = "soundcraft-cli"
version = "0.17.1"
version = "0.17.0"
dependencies = [
"clap",
"clap_complete",
@@ -4387,7 +4420,7 @@ dependencies = [
[[package]]
name = "soundcraft-dsp"
version = "0.17.1"
version = "0.17.0"
dependencies = [
"log",
"proptest",
@@ -4398,7 +4431,7 @@ dependencies = [
[[package]]
name = "soundcraft-engine"
version = "0.17.1"
version = "0.17.0"
dependencies = [
"craft-docpath",
"log",
@@ -4421,7 +4454,7 @@ dependencies = [
[[package]]
name = "soundcraft-midi"
version = "0.17.1"
version = "0.17.0"
dependencies = [
"proptest",
"serde",
@@ -4431,7 +4464,7 @@ dependencies = [
[[package]]
name = "soundcraft-mix"
version = "0.17.1"
version = "0.17.0"
dependencies = [
"log",
"rayon",
@@ -4447,7 +4480,7 @@ dependencies = [
[[package]]
name = "soundcraft-model"
version = "0.17.1"
version = "0.17.0"
dependencies = [
"proptest",
"serde",
@@ -4460,7 +4493,7 @@ dependencies = [
[[package]]
name = "soundcraft-playback"
version = "0.17.1"
version = "0.17.0"
dependencies = [
"cpal",
"log",
@@ -4475,7 +4508,7 @@ dependencies = [
[[package]]
name = "soundcraft-time"
version = "0.17.1"
version = "0.17.0"
dependencies = [
"proptest",
"serde",
@@ -4485,11 +4518,12 @@ dependencies = [
[[package]]
name = "soundcraft-ui-egui"
version = "0.17.1"
version = "0.17.0"
dependencies = [
"craft-ui",
"craft-update",
"egui",
"egui_extras",
"egui_kittest",
"image",
"log",
@@ -4514,7 +4548,7 @@ dependencies = [
[[package]]
name = "soundcraft-video"
version = "0.17.1"
version = "0.17.0"
dependencies = [
"craft-media",
"image",
@@ -4526,7 +4560,7 @@ dependencies = [
[[package]]
name = "soundcraft-vst3-host"
version = "0.17.1"
version = "0.17.0"
dependencies = [
"libloading 0.9.0",
"log",
@@ -4542,7 +4576,7 @@ dependencies = [
[[package]]
name = "soundcraft-web"
version = "0.17.1"
version = "0.17.0"
dependencies = [
"eframe",
"egui",
@@ -6190,7 +6224,7 @@ checksum = "e450f9b2ed1dff33c94c12589a87338689467b9c4f5d8a5710bd09a847d2c8a7"
[[package]]
name = "xtask"
version = "0.17.1"
version = "0.17.0"
dependencies = [
"serde_json",
]
@@ -6510,11 +6544,6 @@ name = "egui_demo_lib"
version = "0.37.0"
source = "git+https://github.com/storytold/egui.git?rev=6d518fc799681571963842f95b55a6b68431b15a#6d518fc799681571963842f95b55a6b68431b15a"
[[patch.unused]]
name = "egui_extras"
version = "0.37.0"
source = "git+https://github.com/storytold/egui.git?rev=6d518fc799681571963842f95b55a6b68431b15a#6d518fc799681571963842f95b55a6b68431b15a"
[[patch.unused]]
name = "egui_inspection"
version = "0.37.0"
+3 -1
View File
@@ -4,7 +4,7 @@ members = ["crates/*", "apps/*", "xtask"]
default-members = ["crates/*", "apps/*", "xtask"]
[workspace.package]
version = "0.17.1"
version = "0.17.0"
edition = "2024"
license = "MIT OR Apache-2.0"
rust-version = "1.90"
@@ -60,6 +60,8 @@ craft-update = { version = "=0.1.0", git = "https://github.com/storytold/craft-l
# ui
craft-ui = { version = "0.1.0", git = "https://github.com/storytold/craft-libs", rev = "c5a1cbfb5f9049f9270955caffb5bee5997aebf7", features = ["serde"] }
egui = { version = "0.37" }
# Resizable table columns (About ▸ Contributors / Models); no image loaders.
egui_extras = { version = "0.37", default-features = false }
eframe = { version = "0.37", default-features = false }
# Monotonic clock on native and the browser (the `web_time::Instant` panics-free equivalent).
web-time = "1.1"
+1 -3
View File
@@ -150,9 +150,7 @@ mod tests {
fn tmp(name: &str) -> PathBuf {
let d = std::env::temp_dir().join(format!("soundcraft-clap-scan-{name}-{}", std::process::id()));
let _ = std::fs::remove_dir_all(&d);
// Created exclusively: a folder still there after the cleanup (someone else's) would
// let a link inside it redirect the test's writes.
std::fs::create_dir(&d).unwrap();
std::fs::create_dir_all(&d).unwrap();
d
}
+1 -27
View File
@@ -212,9 +212,6 @@ impl Autosave {
let audio_dir = self.dir.join("Audio Files");
let mut s = session.clone();
let mut copies = BTreeMap::new();
// Copies made in this write, by the audio they hold: sources sharing one decoded buffer
// (a session may name one file under many ids) share one file.
let mut written: BTreeMap<*const SourceAudio, String> = BTreeMap::new();
for src in &mut s.sources {
let file = if Path::new(&src.path).is_absolute() { Some(PathBuf::from(&src.path)) } else { base.as_ref().map(|b| b.join(&src.path)) };
let audio = s.pool.get(src.id);
@@ -227,7 +224,6 @@ impl Autosave {
let Some(audio) = audio else { continue };
let name = match self.copies.remove(&src.id) {
Some((copy, name)) if copy.upgrade().is_some_and(|a| Arc::ptr_eq(&a, audio)) => name,
_ if written.contains_key(&Arc::as_ptr(audio)) => written.get(&Arc::as_ptr(audio)).cloned().unwrap_or_default(),
_ => {
let name = format!("{} {}.wav", sanitize_name(&src.name), self.next);
self.next += 1;
@@ -239,16 +235,13 @@ impl Autosave {
};
src.path = audio_dir.join(&name).to_string_lossy().into_owned();
src.unsaved = true;
written.insert(Arc::as_ptr(audio), name.clone());
copies.insert(src.id, (Arc::downgrade(audio), name));
}
let text = s.to_json().map_err(|err| EngineError::Io(err.to_string()))?;
write_atomically(&self.dir.join(ORIGIN), origin.unwrap_or_default().as_bytes())?;
write_atomically(&self.dir.join(SESSION), text.as_bytes())?;
for (_, name) in std::mem::replace(&mut self.copies, copies).into_values() {
if !self.copies.values().any(|(_, kept)| *kept == name) {
let _ = std::fs::remove_file(audio_dir.join(name));
}
let _ = std::fs::remove_file(audio_dir.join(name));
}
if let Some(r) = recording {
let plan = serde_json::to_string(r).map_err(|err| EngineError::Io(err.to_string()))?;
@@ -514,25 +507,6 @@ mod tests {
let _ = std::fs::remove_dir_all(&dir);
}
#[test]
fn sources_sharing_one_buffer_share_one_copy() {
let dir = folder("autosave-aliases");
let mut e = Engine::default();
record(&mut e, 0.5);
// Nine more source ids over the same decoded audio, as a session file may declare.
let s = e.session_mut();
let (src, audio) = (s.sources[0].clone(), s.pool.get(s.sources[0].id).cloned().unwrap());
for _ in 0..9 {
let id = SourceId(s.alloc());
s.sources.push(soundcraft_model::Source { id, ..src.clone() });
s.pool.insert(id, audio.clone());
}
let mut a = Autosave::create(&dir.join("Autosave"), "Song").unwrap();
a.write(e.session(), None, None).unwrap();
assert_eq!(std::fs::read_dir(a.dir.join("Audio Files")).unwrap().count(), 1, "one file for the ten ids");
let _ = std::fs::remove_dir_all(&dir);
}
#[test]
fn a_take_recorded_after_undo_gets_its_own_copy() {
let dir = folder("autosave-undo");
+1 -4
View File
@@ -347,10 +347,7 @@ pub fn clip_id(p: &Value, cmd: &str) -> Result<ClipId> {
pub fn clip_ids_param(e: &Engine, p: &Value) -> Vec<ClipId> {
if let Some(arr) = p.get("clips").and_then(Value::as_array) {
// Each clip once, in the order given: a repeated id would otherwise be processed (and,
// for a render, re-rendered into another source) once per repeat.
let mut seen = std::collections::HashSet::new();
return arr.iter().filter_map(Value::as_u64).map(ClipId).filter(|id| seen.insert(*id)).collect();
return arr.iter().filter_map(Value::as_u64).map(ClipId).collect();
}
if let Some(n) = p.get("clip").and_then(Value::as_u64) {
return vec![ClipId(n)];
+1 -11
View File
@@ -418,9 +418,7 @@ fn svg_budgeted(parts: &[Part], setup: &ScoreSetup, budget: usize) -> Result<Str
const STAFF_GAP: f64 = 70.0;
const SYSTEM_GAP: f64 = 40.0;
let n_measures = parts.iter().map(|p| p.measures.len()).max().unwrap_or(0);
// The layout range the setup offers (1 to 16): a caller's own value can't multiply the
// barlines drawn per system beyond it.
let per = setup.bars_per_system.clamp(1, 16) as usize;
let per = setup.bars_per_system.max(1) as usize;
let systems = n_measures.div_ceil(per).max(1);
let label_w = if setup.show_track_names { 70.0 } else { 0.0 };
let staff_x0 = MARGIN + label_w + 34.0;
@@ -784,14 +782,6 @@ mod tests {
assert!(m.items.iter().any(|i| i.pitches.is_empty()), "the discarded suffix became rests");
}
#[test]
fn bars_per_system_is_held_to_the_supported_range() {
let setup = ScoreSetup { title: "t".into(), composer: String::new(), bars_per_system: u32::MAX, show_track_names: false };
let part = Part { name: "p".into(), bass: false, measures: vec![Measure { numerator: 4, denominator: 4, items: Vec::new() }] };
let out = svg_budgeted(std::slice::from_ref(&part), &setup, 1 << 20).unwrap();
assert_eq!(out.matches("stroke-width=\"1\"").count(), 16, "sixteen barlines, not billions");
}
#[test]
fn oversized_title_is_refused_by_the_header_check() {
// An oversized part name/title must be caught by the header check even with no measures:
+3 -67
View File
@@ -213,52 +213,18 @@ impl TempoMap {
}
}
/// Remove the meters after `tick`, returning each with the bar it starts: the bar
/// [`Self::bar_beat_at_tick`] gives its tick, counted in one pass over the map rather than one
/// walk per meter, so a session with many meter changes edits in linear time.
/// Remove the meters after `tick`, returning each with the bar it starts.
fn take_meters_after(&mut self, tick: i64) -> Vec<(i64, MeterEvent)> {
let mut later = Vec::new();
let (mut bar, mut seg_tick) = (1i64, 0i64);
for (i, m) in self.meters.iter().enumerate() {
let tpb = m.ticks_per_bar();
if m.tick > tick {
later.push((bar.saturating_add(m.tick.saturating_sub(seg_tick) / tpb), *m));
}
if let Some(n) = self.meters.get(i + 1) {
bar = bar.saturating_add(ceil_div(n.tick.saturating_sub(seg_tick), tpb));
seg_tick = n.tick;
}
}
let later: Vec<_> = self.meters.iter().filter(|e| e.tick > tick).map(|e| (self.bar_beat_at_tick(e.tick).bar, *e)).collect();
self.meters.retain(|e| e.tick <= tick);
later
}
/// The bar and tick of the last meter's segment, where [`Self::bar_start_tick`]'s walk ends.
fn last_segment(&self) -> (i64, i64) {
let (mut cur_bar, mut cur_tick) = (1i64, 0i64);
for (i, m) in self.meters.iter().enumerate() {
if let Some(n) = self.meters.get(i + 1) {
cur_bar = cur_bar.saturating_add(ceil_div(n.tick.saturating_sub(cur_tick), m.ticks_per_bar()));
cur_tick = n.tick;
}
}
(cur_bar, cur_tick)
}
/// Put meters back at the start of their bars under the current earlier meters, in bar order.
/// Each lands at or past the last meter, so the walk to its bar resumes from there; a bar
/// before it (meters off their bar lines) takes the full walk.
fn restore_meters_at_bars(&mut self, later: Vec<(i64, MeterEvent)>) {
let (mut cur_bar, mut cur_tick) = self.last_segment();
for (bar, ev) in later {
let tick = if bar >= cur_bar {
let tpb = self.meters.last().map_or(MeterEvent { tick: 0, numerator: 4, denominator: 4 }, |m| *m).ticks_per_bar();
cur_tick.saturating_add(bar.saturating_sub(cur_bar).saturating_mul(tpb))
} else {
self.bar_start_tick(bar)
};
let tick = self.bar_start_tick(bar);
self.put_meter(MeterEvent { tick, ..ev });
(cur_bar, cur_tick) = if bar >= cur_bar { (bar, tick) } else { self.last_segment() };
}
}
@@ -475,36 +441,6 @@ mod tests {
assert_eq!(m.bar_beat_at_tick(m.tick_at_bar_beat(bb)), bb);
}
#[test]
fn editing_an_early_meter_keeps_later_bars_and_scales_linearly() {
// 200 000 meter changes, one per bar, built directly: a walk per meter would take
// minutes to edit here, and even to build through `set_meter`.
let mut m = TempoMap::new(120.0, 4, 4).unwrap();
let mut tick = 0;
for bar in 1..200_000i64 {
let numerator = 3 + (bar % 2) as u32;
tick += m.meters.last().map_or(0, MeterEvent::ticks_per_bar);
m.meters.push(MeterEvent { tick, numerator, denominator: 4 });
}
let sample = [1usize, 1_000, 199_998];
let bars = |m: &TempoMap| sample.map(|i| m.bar_beat_at_tick(m.meters[i].tick).bar);
assert_eq!(bars(&m), [2, 1_001, 199_999]);
m.set_meter(0, 7, 8).unwrap();
assert_eq!(bars(&m), [2, 1_001, 199_999], "later meters keep their bar numbers");
assert_eq!(m.meters.len(), 200_000);
assert!(m.meters.windows(2).all(|w| w[0].tick < w[1].tick));
assert!(m.remove_meter(m.meters[1].tick));
assert_eq!([1usize, 999, 199_997].map(|i| m.bar_beat_at_tick(m.meters[i].tick).bar), [3, 1_001, 199_999]);
// Meters off their bar lines (counted as bars 2 and 4) land where they always did: on
// bar 2 of the new meter, then two bars of their own later.
let mut off = TempoMap::new(120.0, 4, 4).unwrap();
off.meters.push(MeterEvent { tick: 100, numerator: 3, denominator: 4 });
off.meters.push(MeterEvent { tick: 5_000, numerator: 5, denominator: 4 });
off.set_meter(0, 2, 4).unwrap();
let placed: Vec<(i64, u32)> = off.meters.iter().map(|e| (e.tick, e.numerator)).collect();
assert_eq!(placed, vec![(0, 2), (2 * TICKS_PER_QUARTER, 3), (8 * TICKS_PER_QUARTER, 5)]);
}
#[test]
fn eighth_note_meters() {
let m = TempoMap::new(120.0, 6, 8).unwrap();
+1
View File
@@ -24,6 +24,7 @@ soundcraft-video.workspace = true
# 0.37 makes the bundled faces opt-in; the app's own font loader starts from
# `FontDefinitions::default()`, and kittest never supplies fonts to this root.
egui = { workspace = true, features = ["default_fonts", "monochrome_emoji_fonts"] }
egui_extras = { workspace = true }
web-time.workspace = true
serde.workspace = true
serde_json.workspace = true
+322 -53
View File
@@ -262,71 +262,213 @@ pub fn contributors_ui(ui: &mut egui::Ui) {
let list = sorted(CONTRIBUTORS, v.names, v.key, v.ascending);
ui.label(RichText::new(format!("{} contributors · {} commits", list.len(), group(TOTAL_COMMITS))).small().weak());
ui.separator();
egui::ScrollArea::both().auto_shrink([false, false]).show(ui, |ui| {
if list.is_empty() {
ui.label("No contributor data was built into this copy.");
} else if v.table {
table(ui, &list, &mut v);
} else {
if list.is_empty() {
ui.label("No contributor data was built into this copy.");
} else if v.table {
// The table scrolls vertically itself, under a fixed header; it only scrolls sideways
// once its columns are dragged wider than the dialog.
egui::ScrollArea::horizontal().auto_shrink([false, false]).show(ui, |ui| table(ui, &list, &mut v));
} else {
egui::ScrollArea::vertical().auto_shrink([false, false]).show(ui, |ui| {
contributors_grab_bag(ui, &list, v.names);
}
});
});
}
ui.data_mut(|d| d.insert_temp(id, v));
}
fn table(ui: &mut egui::Ui, list: &[&Contributor], v: &mut View) {
egui::Grid::new("credits_table").striped(true).num_columns(SortKey::ALL.len()).show(ui, |ui| {
for k in SortKey::ALL {
let arrow = if v.key == k { if v.ascending { " ⏶" } else { " ⏷" } } else { "" };
if ui.button(RichText::new(format!("{}{arrow}", k.label().1)).strong()).on_hover_text(k.label().0).clicked() {
if v.key == k {
v.ascending = !v.ascending;
} else {
v.key = k;
v.ascending = k.default_ascending();
}
}
}
ui.end_row();
for c in list {
ui.hyperlink_to(c.name(v.names), format!("https://github.com/{}", c.login)).on_hover_text(c.summary());
ui.label(group(c.prs));
ui.label(group(c.commits));
ui.label(group(c.lines_added));
ui.label(group(c.lines_deleted));
ui.label(signed(c.lines_delta()));
ui.label(group(c.binary_added));
ui.label(group(c.binary_deleted));
ui.label(day(c.first_commit));
ui.label(day(c.last_commit));
ui.end_row();
}
});
/// How the contributor table's spare width is shared out: all of it to Name.
const CONTRIBUTOR_GROW: [f32; 10] = [1.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0];
/// How the model table's spare width is shared out: to Company and Model, the text columns.
const MODEL_GROW: [f32; 6] = [1.0, 2.0, 0.0, 0.0, 0.0, 0.0];
/// The narrowest a column can be dragged.
const MIN_COLUMN: f32 = 28.0;
/// The width a column needs for its header and its widest cell.
fn natural(ui: &egui::Ui, header: RichText, cells: impl Iterator<Item = String>) -> f32 {
let measure = |text: egui::WidgetText| text.into_galley(ui, Some(egui::TextWrapMode::Extend), f32::INFINITY, egui::TextStyle::Body).size().x;
let widest = cells.map(|c| measure(c.into())).fold(measure(header.into()), f32::max);
widest + 2.0 * ui.spacing().button_padding.x
}
/// About › Models: AI models credited in Co-Authored-By trailers.
/// Opening column widths: each column's natural width, with the spare room shared out by `grow`,
/// so the columns fill `room` exactly. When there is too little room, only the growing columns
/// give way, each in proportion to its width above [`MIN_COLUMN`], and none goes below that.
fn fit_widths(natural: &[f32], grow: &[f32], room: f32) -> Vec<f32> {
let spare = room - natural.iter().sum::<f32>();
let weight = grow.iter().sum::<f32>();
let slack = |w: f32| (w - MIN_COLUMN).max(0.0);
let flexible: f32 = natural.iter().zip(grow).filter(|(_, g)| **g > 0.0).map(|(w, _)| slack(*w)).sum();
natural
.iter()
.zip(grow)
.map(|(w, g)| {
if *g > 0.0 && spare >= 0.0 {
w + spare * g / weight
} else if *g > 0.0 && flexible > 0.0 {
w - (-spare).min(flexible) * slack(*w) / flexible
} else {
*w
}
})
.collect()
}
/// A striped table whose columns open at [`fit_widths`], so it fills the width and nothing scrolls
/// sideways. Every column, the last included, can be dragged wider or narrower at its right edge:
/// only a table dragged wider than the window scrolls sideways. Text too long for its column is
/// clipped. When a column's natural width or the window changes, the columns go back to a new fit,
/// dropping any dragged widths.
fn fitted_table<'a>(ui: &'a mut egui::Ui, id: &str, natural: &[f32], grow: &[f32]) -> egui_extras::TableBuilder<'a> {
// Every cell is followed by the item gap, and the vertical scrollbar keeps its margins.
let s = ui.spacing();
let gaps = s.item_spacing.x * natural.len() as f32;
let bar = s.scroll.bar_width + s.scroll.bar_inner_margin + s.scroll.bar_outer_margin;
let widths = fit_widths(natural, grow, (ui.available_width() - gaps - bar).max(0.0));
// The table keeps its own column widths, so a change in what they were fitted to has to clear
// them. A longer name can leave the fit itself unchanged, and scrolling can nudge the available
// width, so this compares the natural widths and the clip rect, which scrolling never moves.
let fit = egui::Id::unique(("credits_fit", id));
let measured = (natural.to_vec(), ui.clip_rect().width());
let refit = ui.data_mut(|d| d.get_temp::<(Vec<f32>, f32)>(fit)).as_ref() != Some(&measured);
ui.data_mut(|d| d.insert_temp(fit, measured));
let mut t =
egui_extras::TableBuilder::new(ui).id_salt(id).striped(true).resizable(true).auto_shrink([false, false]).max_scroll_height(f32::INFINITY);
if refit {
t.reset();
}
for w in widths {
t = t.column(egui_extras::Column::initial(w).at_least(MIN_COLUMN).clip(true));
}
t
}
/// Add a cell's widget right-aligned (counts, dates) or left-aligned (names), vertically centred.
fn aligned<R>(ui: &mut egui::Ui, right: bool, add: impl FnOnce(&mut egui::Ui) -> R) -> R {
let layout = if right { egui::Layout::right_to_left(egui::Align::Center) } else { egui::Layout::left_to_right(egui::Align::Center) };
ui.with_layout(layout, add).inner
}
fn row_height(ui: &egui::Ui) -> f32 {
ui.text_style_height(&egui::TextStyle::Body) + 6.0
}
/// One contributor's table cells after the name, in `SortKey::ALL` order.
fn cells(c: &Contributor) -> [String; 9] {
[
group(c.prs),
group(c.commits),
group(c.lines_added),
group(c.lines_deleted),
signed(c.lines_delta()),
group(c.binary_added),
group(c.binary_deleted),
day(c.first_commit).to_string(),
day(c.last_commit).to_string(),
]
}
/// A contributor-table header. The sorted column is highlighted; its direction shows on the
/// toolbar's sort-order button, so no arrow widens the column.
fn header_text(k: SortKey) -> RichText {
RichText::new(k.label().1).strong()
}
fn table(ui: &mut egui::Ui, list: &[&Contributor], v: &mut View) {
let h = row_height(ui);
let rows: Vec<[String; 9]> = list.iter().map(|c| cells(c)).collect();
let widths: Vec<f32> = SortKey::ALL
.iter()
.enumerate()
.map(|(i, &k)| match i.checked_sub(1) {
None => natural(ui, header_text(k), list.iter().map(|c| c.name(v.names))),
Some(col) => natural(ui, header_text(k), rows.iter().filter_map(|r| r.get(col).cloned())),
})
.collect();
fitted_table(ui, "credits_table", &widths, &CONTRIBUTOR_GROW)
.header(h + 4.0, |mut header| {
for k in SortKey::ALL {
header.col(|ui| {
let r = aligned(ui, k != SortKey::Name, |ui| ui.selectable_label(v.key == k, header_text(k))).on_hover_text(k.label().0);
if r.clicked() {
if v.key == k {
v.ascending = !v.ascending;
} else {
v.key = k;
v.ascending = k.default_ascending();
}
}
});
}
})
.body(|mut body| {
for (c, cells) in list.iter().zip(rows) {
body.row(h, |mut row| {
row.col(|ui| {
aligned(ui, false, |ui| ui.hyperlink_to(c.name(v.names), format!("https://github.com/{}", c.login)))
.on_hover_text(c.summary());
});
for text in cells {
row.col(|ui| {
aligned(ui, true, |ui| ui.label(text));
});
}
});
}
});
}
/// About ▸ Models: AI models credited in Co-Authored-By trailers.
pub fn models_ui(ui: &mut egui::Ui) {
if MODELS.is_empty() {
ui.label("No model credits were built into this copy.");
return;
}
let assisted: u64 = MODELS.iter().map(|m| m.commits).max().unwrap_or(0).max(1);
egui::ScrollArea::both().auto_shrink([false, false]).show(ui, |ui| {
egui::Grid::new("credits_models").striped(true).num_columns(6).show(ui, |ui| {
for h in ["Company", "Model", "Version", "Commits", "% of all commits", "Lines +/−"] {
ui.label(RichText::new(h).strong());
}
ui.end_row();
for m in MODELS {
ui.label(m.company);
ui.label(m.model);
ui.label(m.version);
ui.label(group(m.commits));
ui.label(format!("{:.0}%", 100.0 * m.commits as f64 / TOTAL_COMMITS.max(assisted) as f64));
ui.label(format!("+{} / −{}", group(m.lines_added), group(m.lines_deleted)));
ui.end_row();
}
});
let h = row_height(ui);
let titles = ["Company", "Model", "Version", "Commits", "% of all commits", "Lines +/−"];
// Company, Model and Version read as text; the counts line up on the right.
let right = [false, false, false, true, true, true];
let rows: Vec<[String; 6]> = MODELS
.iter()
.map(|m| {
[
m.company.to_string(),
m.model.to_string(),
m.version.to_string(),
group(m.commits),
format!("{:.0}%", 100.0 * m.commits as f64 / TOTAL_COMMITS.max(assisted) as f64),
format!("+{} / −{}", group(m.lines_added), group(m.lines_deleted)),
]
})
.collect();
let widths: Vec<f32> = titles
.iter()
.enumerate()
.map(|(i, title)| natural(ui, RichText::new(*title).strong(), rows.iter().filter_map(|r| r.get(i).cloned())))
.collect();
egui::ScrollArea::horizontal().id_salt("credits_models").auto_shrink([false, false]).show(ui, |ui| {
fitted_table(ui, "credits_models", &widths, &MODEL_GROW)
.header(h + 4.0, |mut header| {
for (title, r) in titles.into_iter().zip(right) {
header.col(|ui| {
aligned(ui, r, |ui| ui.label(RichText::new(title).strong()));
});
}
})
.body(|mut body| {
for cells in rows {
body.row(h, |mut row| {
for (text, r) in cells.into_iter().zip(right) {
row.col(|ui| {
aligned(ui, r, |ui| ui.label(text));
});
}
});
}
});
});
}
@@ -406,4 +548,131 @@ mod tests {
assert_eq!(day("2026-10-07T18:45:23Z"), "2026-10-07");
assert_eq!(day(""), "—");
}
#[test]
fn columns_fill_the_room_and_spare_width_goes_to_growing_columns() {
assert_eq!(fit_widths(&[100.0, 40.0, 60.0], &[1.0, 0.0, 0.0], 300.0), [200.0, 40.0, 60.0]);
assert_eq!(fit_widths(&[100.0, 40.0, 60.0], &[1.0, 2.0, 0.0], 230.0), [110.0, 60.0, 60.0]);
let w = fit_widths(&[123.0, 45.5, 67.25], &[1.0, 0.0, 2.0], 512.0);
assert!((w.iter().sum::<f32>() - 512.0).abs() < 0.01, "a fitted table neither scrolls nor leaves a gap: {w:?}");
}
#[test]
fn too_little_room_shrinks_only_growing_columns() {
assert_eq!(fit_widths(&[100.0, 40.0, 60.0], &[1.0, 0.0, 0.0], 150.0), [50.0, 40.0, 60.0]);
assert_eq!(fit_widths(&[100.0, 40.0, 60.0], &[1.0, 0.0, 0.0], 0.0), [MIN_COLUMN, 40.0, 60.0]);
assert_eq!(fit_widths(&[100.0, 40.0], &[0.0, 0.0], 50.0), [100.0, 40.0]);
}
#[test]
fn a_column_at_the_minimum_leaves_the_shortfall_to_the_others() {
let w = fit_widths(&[100.0, 300.0, 50.0], &[1.0, 1.0, 0.0], 140.0);
assert!((w.iter().sum::<f32>() - 140.0).abs() < 0.01, "the columns still fit the room: {w:?}");
assert!(w.iter().all(|c| *c >= MIN_COLUMN), "no column goes below the minimum: {w:?}");
assert_eq!(fit_widths(&[100.0, 300.0, 50.0], &[1.0, 1.0, 0.0], 0.0), [MIN_COLUMN, MIN_COLUMN, 50.0]);
}
const WINDOW: f32 = 640.5;
const NATURAL: [f32; 3] = [120.0, 80.0, 80.0];
const GROW: [f32; 3] = [1.0, 0.0, 0.0];
/// One frame of a table long enough to scroll; the rects of its header cells.
fn table_frame(ctx: &egui::Context, width: f32, natural: &[f32], events: Vec<egui::Event>) -> Vec<egui::Rect> {
scrolled_frame(ctx, width, natural, 0.0, events)
}
/// [`table_frame`], scrolled `offset` points sideways.
fn scrolled_frame(ctx: &egui::Context, width: f32, natural: &[f32], offset: f32, events: Vec<egui::Event>) -> Vec<egui::Rect> {
let screen_rect = Some(egui::Rect::from_min_size(egui::Pos2::ZERO, egui::vec2(width, 300.0)));
let raw = egui::RawInput { screen_rect, events, ..Default::default() };
let mut cells = Vec::new();
let out = ctx.run_ui(raw, |ui| {
cells.clear();
egui::ScrollArea::horizontal().auto_shrink([false, false]).horizontal_scroll_offset(offset).show(ui, |ui| {
fitted_table(ui, "test", natural, &GROW)
.header(20.0, |mut header| {
for _ in natural {
header.col(|ui| cells.push(ui.max_rect()));
}
})
.body(|mut body| {
for _ in 0..40 {
body.row(20.0, |mut row| {
for _ in natural {
row.col(|ui| {
ui.label("x");
});
}
});
}
});
});
});
out.drop_without_applying_deltas();
cells
}
/// A new context with the table open and settled, and the rects of its header cells.
fn opened_table() -> (egui::Context, Vec<egui::Rect>) {
let ctx = egui::Context::default();
table_frame(&ctx, WINDOW, &NATURAL, Vec::new());
let cells = table_frame(&ctx, WINDOW, &NATURAL, Vec::new());
(ctx, cells)
}
/// Drags a column's right edge, which runs midway through the gap after `cell`, then lets go.
fn drag_edge(ctx: &egui::Context, cell: egui::Rect, by: f32) {
use egui::{Event, Modifiers, PointerButton};
let start = egui::pos2(cell.right() + 4.0, cell.center().y);
let halfway = start + egui::vec2(by / 2.0, 0.0);
let end = start + egui::vec2(by, 0.0);
let moved = Event::PointerMoved;
let button = |pos, pressed| Event::PointerButton { pos, button: PointerButton::Primary, pressed, modifiers: Modifiers::NONE };
for event in [moved(start), button(start, true), moved(halfway), moved(end), button(end, false)] {
table_frame(ctx, WINDOW, &NATURAL, vec![event]);
}
}
#[test]
fn every_column_can_be_dragged_at_its_right_edge_and_stays_there() {
let (_, opened) = opened_table();
for (dragged, cell) in opened.iter().enumerate() {
let (ctx, _) = opened_table();
drag_edge(&ctx, *cell, -30.0);
table_frame(&ctx, WINDOW, &NATURAL, Vec::new());
let after = table_frame(&ctx, WINDOW, &NATURAL, Vec::new());
for (column, (was, now)) in opened.iter().zip(&after).enumerate() {
let want = if column == dragged { was.width() - 30.0 } else { was.width() };
assert!((now.width() - want).abs() < 1.0, "dragging column {dragged}: column {column} is {now:?}, was {was:?}");
}
}
}
#[test]
fn a_changed_fit_replaces_the_column_widths() {
let (ctx, opened) = opened_table();
drag_edge(&ctx, opened[0], -30.0);
let longer_name = table_frame(&ctx, WINDOW, &[200.0, 80.0, 80.0], Vec::new());
assert!((longer_name[0].width() - opened[0].width()).abs() < 1.0, "a longer name drops a dragged width: {longer_name:?}");
let wider = table_frame(&ctx, WINDOW, &[120.0, 200.0, 80.0], Vec::new());
let widths: Vec<f32> = wider.iter().map(|c| c.width().round()).collect();
assert!(widths.ends_with(&[200.0, 80.0]), "a longer cell widens its column: {widths:?}");
assert!(wider[2].right() < WINDOW, "the table still fits the window: {wider:?}");
let narrower = table_frame(&ctx, 400.0, &NATURAL, Vec::new());
assert!(narrower[2].right() < 400.0, "a narrower window refits the table: {narrower:?}");
}
#[test]
fn scrolling_sideways_keeps_dragged_widths() {
let (ctx, opened) = opened_table();
drag_edge(&ctx, opened[0], 100.0);
table_frame(&ctx, WINDOW, &NATURAL, Vec::new());
let dragged = table_frame(&ctx, WINDOW, &NATURAL, Vec::new());
assert!((dragged[0].width() - opened[0].width() - 100.0).abs() < 1.0, "the drag took: {dragged:?}");
for offset in [13.3, 27.77, 41.1, 0.6] {
scrolled_frame(&ctx, WINDOW, &NATURAL, offset, Vec::new());
let scrolled = scrolled_frame(&ctx, WINDOW, &NATURAL, offset, Vec::new());
assert!((scrolled[0].width() - dragged[0].width()).abs() < 1.0, "scrolled {offset}: {scrolled:?}");
}
}
}
+1 -1
View File
@@ -7,7 +7,7 @@ pub(super) fn about(app: &mut SoundApp, ctx: &egui::Context) {
return;
}
let tab_id = egui::Id::unique("about_tab");
egui::Window::new("About SoundCraft").open(&mut open).default_size(vec2(640.0, 420.0)).collapsible(false).show(ctx, |ui| {
egui::Window::new("About SoundCraft").open(&mut open).default_size(vec2(820.0, 420.0)).collapsible(false).show(ctx, |ui| {
let mut tab = ui.data_mut(|d| d.get_temp::<u8>(tab_id)).unwrap_or(0);
ui.horizontal(|ui| {
for (i, l) in (0u8..).zip(["About", "Contributors", "Models"]) {
+14 -135
View File
@@ -72,22 +72,6 @@ impl Dpb {
self.entries.retain(|e| e.needed_for_output || e.mark != RefMark::Unused);
}
/// Make room for a picture: output one (C.4.5.3), or, when none waits for output and
/// references alone fill the DPB (marking that keeps more than it holds), drop the reference
/// decoded longest ago. False when the DPB is empty.
fn make_room(&mut self, out: &mut Vec<Output>) -> bool {
if self.bump(out) {
return true;
}
let Some(i) = self.entries.iter().enumerate().filter(|(_, e)| e.mark != RefMark::Unused).min_by_key(|(_, e)| e.frame.id).map(|(i, _)| i)
else {
return false;
};
self.entries[i].mark = RefMark::Unused;
self.prune();
true
}
/// Output the picture with the smallest POC (C.4.5.3 "bumping"). Returns false if none waits.
fn bump(&mut self, out: &mut Vec<Output>) -> bool {
let Some(i) = self.entries.iter().enumerate().filter(|(_, e)| e.needed_for_output).min_by_key(|(_, e)| e.poc).map(|(i, _)| i) else {
@@ -150,29 +134,21 @@ impl Dpb {
poc_state: &mut dyn FnMut(u32),
) {
let mut unused = (prev_ref_frame_num + 1) % max_frame_num;
// Only the last `max_num_ref_frames` missing frames can still be references when the gap
// ends: the sliding window drops the earlier ones first, so building their pictures would
// be work (up to 65 535 frame copies from one slice header) thrown straight away. They
// advance the POC state only.
let gap = (frame_num + max_frame_num - unused) % max_frame_num;
let skip = gap.saturating_sub(u32::try_from(max_num_ref_frames.max(1)).unwrap_or(u32::MAX));
let mut guard = 0;
while unused != frame_num && guard < max_frame_num {
self.sliding_window(unused, max_frame_num, max_num_ref_frames);
let (frame, meta) = make_frame(unused);
poc_state(unused);
if guard >= skip {
self.sliding_window(unused, max_frame_num, max_num_ref_frames);
let (frame, meta) = make_frame(unused);
self.entries.push(DpbEntry {
poc: frame.poc,
frame,
frame_num: unused,
long_term_frame_idx: 0,
mark: RefMark::Short,
needed_for_output: false,
non_existing: true,
meta,
});
}
self.entries.push(DpbEntry {
poc: frame.poc,
frame,
frame_num: unused,
long_term_frame_idx: 0,
mark: RefMark::Short,
needed_for_output: false,
non_existing: true,
meta,
});
unused = (unused + 1) % max_frame_num;
guard += 1;
}
@@ -301,11 +277,6 @@ impl Dpb {
}
}
}
3 | 6 if self.max_long_term_frame_idx.is_none_or(|max| m.long_term_frame_idx > max) => {
// A long-term index outside what MMCO 4 (or the IDR) allowed (8.2.5.4.3): a
// conforming stream never sends one, and honouring it would let distinct
// indices retain references past the DPB's capacity.
}
3 => {
let pn = i64::from(curr_pic_num) - (i64::from(m.difference_of_pic_nums_minus1) + 1);
for e in &mut self.entries {
@@ -413,13 +384,13 @@ impl Dpb {
out.push(Output { frame, poc, meta });
return;
}
if !self.make_room(out) {
if !self.bump(out) {
break;
}
}
} else {
while self.entries.len() >= self.capacity {
if !self.make_room(out) {
if !self.bump(out) {
break;
}
}
@@ -458,98 +429,6 @@ mod tests {
Mmco { op, difference_of_pic_nums_minus1: diff, long_term_pic_num: 0, long_term_frame_idx: 0, max_long_term_frame_idx_plus1: 0 }
}
fn frame(id: u32) -> (FrameRef, Arc<OutputMeta>) {
let meta = OutputMeta {
pts: 0,
key: false,
crop: (0, 0, 0, 0),
full_range: false,
colour_primaries: 0,
transfer_characteristics: 0,
matrix_coefficients: 0,
sar: (1, 1),
draft: false,
};
(Arc::new(crate::h264::picture::Frame::new(id, 0, 1, 1)), Arc::new(meta))
}
/// A P slice header of a reference picture, with nothing else set.
fn reference_slice() -> SliceHeader {
SliceHeader {
nal_ref_idc: 1,
nal_unit_type: 1,
idr: false,
first_mb_in_slice: 0,
slice_type_raw: 0,
slice_type: SliceType::P,
pps_id: 0,
colour_plane_id: 0,
frame_num: 0,
field_pic: false,
bottom_field: false,
idr_pic_id: 0,
pic_order_cnt_lsb: 0,
delta_pic_order_cnt_bottom: 0,
delta_pic_order_cnt: [0; 2],
redundant_pic_cnt: 0,
direct_spatial_mv_pred: false,
num_ref_idx_active: [1, 0],
ref_pic_list_mod: [Vec::new(), Vec::new()],
pred_weight_table: None,
no_output_of_prior_pics: false,
long_term_reference: false,
adaptive_ref_pic_marking: false,
mmcos: Vec::new(),
cabac_init_idc: 0,
slice_qp_delta: 0,
sp_for_switch: false,
slice_qs_delta: 0,
disable_deblocking_filter_idc: 0,
slice_alpha_c0_offset_div2: 0,
slice_beta_offset_div2: 0,
slice_group_change_cycle: 0,
header_bits: 0,
}
}
#[test]
fn a_frame_num_gap_builds_only_the_frames_that_stay_references() {
let mut dpb = Dpb::new();
let (mut built, mut poc_updates) = (Vec::new(), 0u32);
// frame_num 0 was the last reference; the next slice says 60_000: 59 999 missing frames.
dpb.fill_frame_num_gap(0, 60_000, 1 << 16, 4, &mut |n| (built.push(n), frame(n)).1, &mut |_| poc_updates += 1);
assert_eq!(poc_updates, 59_999, "every missing frame advances the POC state");
assert_eq!(built, vec![59_996, 59_997, 59_998, 59_999], "only the ones the sliding window would keep are built");
assert_eq!(dpb.entries.iter().map(|e| e.frame_num).collect::<Vec<_>>(), built);
// A gap shorter than the window builds every frame, as before.
let mut dpb = Dpb::new();
let mut built = Vec::new();
dpb.fill_frame_num_gap(7, 10, 16, 4, &mut |n| (built.push(n), frame(n)).1, &mut |_| {});
assert_eq!(built, vec![8, 9]);
}
#[test]
fn long_term_marking_cannot_grow_the_dpb_past_its_capacity() {
let mut dpb = Dpb::new();
dpb.capacity = 4;
let mut out = Vec::new();
let mut sh = SliceHeader { adaptive_ref_pic_marking: true, ..reference_slice() };
// Each picture takes a distinct long-term index, after MMCO 4 allowed 1000 of them.
for n in 0..40u32 {
sh.frame_num = n;
sh.mmcos = vec![Mmco { op: 4, max_long_term_frame_idx_plus1: 1000, ..mmco(0, 0) }, Mmco { op: 6, long_term_frame_idx: n, ..mmco(0, 0) }];
let (f, meta) = frame(n);
dpb.store_picture(&sh, f, n as i32, 1 << 16, 16, meta, &mut out);
assert!(dpb.entries.len() <= 4, "{} entries after picture {n}", dpb.entries.len());
}
// An index past what MMCO 4 allowed is ignored: the picture is a short-term reference.
sh.frame_num = 40;
sh.mmcos = vec![Mmco { op: 6, long_term_frame_idx: 5000, ..mmco(0, 0) }];
let (f, meta) = frame(40);
dpb.store_picture(&sh, f, 40, 1 << 16, 16, meta, &mut out);
assert_eq!(dpb.entries.iter().find(|e| e.frame_num == 40).map(|e| e.mark), Some(RefMark::Short));
}
#[test]
fn mmco_huge_difference_does_not_panic() {
for op in [1, 3] {
-35
View File
@@ -397,10 +397,6 @@ impl Sps {
let pic_height_in_map_units = plus(r.read_ue()?, 1, "picture too large")?;
ensure!(pic_width_in_mbs <= 1024 && pic_height_in_map_units <= 1024, "picture too large");
let frame_mbs_only = r.read_flag()?;
// Picture state is allocated from these before any macroblock is read: the movie's pixel
// budget applies here too, so a 16 384-square SPS can't claim its planes.
let coded_mbs = u64::from(pic_width_in_mbs) * u64::from(pic_height_in_map_units) * if frame_mbs_only { 1 } else { 2 };
ensure!(coded_mbs * 256 <= crate::movie::MAX_PIXELS, "picture too large");
let mb_adaptive_frame_field = if !frame_mbs_only { r.read_flag()? } else { false };
let direct_8x8_inference = r.read_flag()?;
let frame_crop = if r.read_flag()? { Some((r.read_ue()?, r.read_ue()?, r.read_ue()?, r.read_ue()?)) } else { None };
@@ -703,37 +699,6 @@ mod tests {
assert_eq!(l, [10; 16]);
}
#[test]
fn an_sps_past_the_pixel_budget_is_refused_before_allocation() {
// As `parse_minimal_baseline_sps`, with `mbs` × `mbs` macroblocks.
let sps = |mbs: u32, frame_mbs_only: bool| {
let mut w = BitWriter::new();
w.write_bits(66, 8);
w.write_bits(0xC0, 8);
w.write_bits(30, 8);
w.write_ue(0);
w.write_ue(0);
w.write_ue(2);
w.write_ue(1);
w.write_bit(false);
w.write_ue(mbs - 1);
w.write_ue(mbs - 1);
w.write_bit(frame_mbs_only);
if !frame_mbs_only {
w.write_bit(false); // mb_adaptive_frame_field
}
w.write_bit(true);
w.write_bit(false);
w.write_bit(false);
w.rbsp_trailing();
Sps::parse(&w.finish())
};
assert!(sps(512, true).is_ok(), "8192 × 8192 is the budget");
assert!(sps(513, true).is_err(), "one macroblock column more is past it");
assert!(sps(512, false).is_err(), "field pictures double the map units");
assert!(sps(362, false).is_ok());
}
#[test]
fn parse_minimal_baseline_sps() {
// profile 66, level 30, sps_id 0, log2_max_frame_num_minus4 0, poc type 2, 1 ref, 11x9 MBs.
+2 -5
View File
@@ -197,11 +197,8 @@ mod tests {
#[test]
fn a_failed_update_restores_the_manifest() {
// Created exclusively: a folder already there (planted, or left by a failed run) would be
// someone else's, and a link inside it could redirect the writes below.
let nanos = std::time::SystemTime::now().duration_since(std::time::UNIX_EPOCH).map_or(0, |d| d.subsec_nanos());
let root = std::env::temp_dir().join(format!("xtask-version-restore-{}-{nanos}", std::process::id()));
std::fs::create_dir(&root).unwrap();
let root = std::env::temp_dir().join(format!("xtask-version-restore-{}", std::process::id()));
std::fs::create_dir_all(&root).unwrap();
let path = root.join("Cargo.toml");
std::fs::write(&path, MANIFEST).unwrap();
let err = set(&root, &path, MANIFEST, "2.0.0", || Err("cargo update failed".into())).unwrap_err();