pdfcraft/crates/optimize/README.md

# pdfcraft-optimize

Layer L4: the PDF Optimizer (execution plan M11.1; Acrobat's Reduce File Size and Optimize PDF ▸
Advanced optimization).

```rust
let report = optimize(&mut doc, &Settings::default())?;   // Reduce File Size's choices
let report = optimize(&mut doc, &Preset::Mobile.settings())?; // smaller, for screens
// Or with progress: called before each image and the clean-up; `false` cancels.
let report = optimize_with_progress(&mut doc, &settings, &mut |stage| keep_going)?;
```

- **Presets:** Standard (Reduce File Size's choices: images above 225 ppi to 150 ppi, JPEG
  medium) and Mobile (above 144 ppi to 96 ppi, JPEG high), as in Acrobat's Settings menu. In
  both, black-and-white images are averaged down to 300 ppi above 450 ppi, and stored as CCITT
  Group 4 whenever that is smaller.
- **Merge image fragments** (`fragments`, on by default): some PDF printers draw a page picture
  as thousands of images one pixel row high. Runs of upright 8-bit grey or RGB images in one
  colour space, sharing their left and right edges and stacked edge to edge (at least four,
  drawn with nothing else between them), become one lossless image at their finest resolution,
  which the image settings then resample; the strips are dropped by Clean Up. A real page
  printed this way went from 4.3 MB to 231 KB (Standard) and 161 KB (Mobile). Not merged yet:
  side-by-side tiles, rotated strips, masks. Content arrays use the shared space boundary
  policy, so trailing comments, split operands and graphics state keep their meaning after merging.
- **Images:** the effective resolution of each image is measured where pages draw it (the CTM
  through form XObjects, up to 12 deep; the smallest over all uses).
  Page-local `/UserUnit` scaling is included, so large-format pages are measured in physical inches.
  If a use can't be
  measured (forms nested deeper, or drawn too many times), no image is resampled. Colour and grayscale images above a
  threshold are resampled with a bicubic (Catmull-Rom) filter to a target resolution and
  stored as JPEG (Acrobat's quality steps) or ZIP; soft masks are resampled with their image.
  An image is replaced only if the result is smaller. Left alone by these colour and grey
  settings: CMYK and other colour spaces, image masks, decode arrays, more than 8 bits, JPEG 2000,
  JBIG2 and CCITT (black-and-white images, CCITT among them, are below). A JPEG is read with
  its colour transform (an Adobe marker's, else `/ColorTransform`, ISO 32000-2 §7.4.8), so one
  stored untransformed keeps its colours; one whose marker and `/ColorTransform` disagree is left
  alone, since readers differ on which wins. Samples are read with `/DecodeParms` given by
  reference too, the numbers inside included (`Document::with_direct_parms`), here and below:
  without them a predictor's tag bytes would shift every row of an image written back.
- **Monochrome images** (`Settings::mono`, `MonoSettings::REDUCE` by default: to 300 ppi above
  450 ppi, CCITT Group 4). Black-and-white images are a 1-bit image with one colour component
  (grey, indexed, a separation) or an image mask, stored with no filter, with general-purpose ones
  or with CCITT fax after any of those (decoded by `Document::decoded_image_within`, no further
  than its rows can need; byte-aligned Group 3 with end-of-line codes but none before the first
  row, not as T.4 sends them, is read as PdfCraft draws it, which at `/K 0` may be other rows than
  were coded, and an image stored again keeps them). Packed to one bit first, unless a colour-key `/Mask` is in the image's
  own values: eight-bit grey of only 0 and 255; eight-bit `DeviceRGB` of only black and white,
  which becomes `DeviceGray` (not calibrated RGB or RGB with a profile, nor one drawn or listed
  where `/DefaultGray` or `/DefaultRGB` is in force, which would then draw it otherwise, nor one
  referred to from anywhere but the page and form resources the optimizer reads, where they may
  be: an annotation's appearance or a pattern drawing it, directly or through resources or a form
  it shares with a page, or another image's `/Alternates`; nor one whose soft mask has a
  `/Matte`); and an indexed image of 2, 4 or 8 bits that uses only palette entries
  0 and 1, which keeps its palette, whatever its two colours. A decode array stays when it means
  the same at one bit (grey's, or RGB's if the same for each component, as grey's), and an indexed
  image's default one goes, as the default at one bit; otherwise the image is left alone. The grey
  or colour settings take a packed image instead when they make it smaller still, its soft mask
  counted (resampled with it there, kept as it is here), as they can a dithered scan by
  downsampling it to JPEG.
  - **Downsampling:** one whose effective resolution is above `above_ppi` is averaged down to
    `target_ppi`: each new pixel takes the sample covering more of its area, and the dark one on a
    tie, so a dark line half a new pixel wide stays: black in grey, the painted part of an image
    mask (a 0, or a 1 with an inverting decode array), and the darker of an indexed image's two
    palette entries. Only images whose dark sample is known so are averaged: `DeviceGray` (grey and
    RGB packed to one bit among them), image masks, and indexed images over `DeviceGray` or
    `DeviceRGB`, whose palette is read (Rec. 601 luma for RGB), with no decode array or one of two
    different numbers, and not drawn or listed where `/DefaultGray` or `/DefaultRGB` is or may be
    in force. Not a separation or a DeviceN, whose tint transform isn't read, calibrated or ICC
    grey, or an indexed image over another base or whose two entries look alike. Not one with a soft mask, whose own size would have to
    follow; not a halftone or a dither, most of whose new pixels would cover both black and white,
    so that taking the sample covering more would turn its tones solid (a 50% screen black, a 25%
    one white), nor one with a square of four new pixels that each would, as a small screened
    picture on a white page has: ragged scanned text has such squares along its strokes too, and
    is then left at its resolution. And not one wider than a fax row
    (`pdfcraft_filters::MAX_CCITT_COLUMNS`), as the averaging keeps a counter for each column. On a
    600 ppi page of text that is averaged, Group 4 at 300 ppi is about half the size.
  - **Compression:** CCITT Group 4 (`pdfcraft_filters::encode_g4`), or 1-bit Flate when that is
    smaller, which only a resampled image or one packed from more bits may be: a 1-bit image that
    is only stored again becomes Group 4 or stays. Group 4 alone is only decoded to be resampled;
    Group 3, or Group 4 inside another filter such as `ASCII85Decode`, is stored again as Group 4
    alone when that is smaller. Damaged Group 3 with end-of-line codes is stored as the decoder
    recovers it, a bad row picked up again at the next code, as it reports no damage there; without
    them, damage stops the decoding and the image is left alone. With Retain, a resampled image
    keeps its kind of compression (CCITT, or Flate) and nothing else changes; an image of more bits
    is then left to the grey or colour settings. Every change is kept only when it is smaller as
    stored.
  - Apart from the downsampling it is lossless: the samples keep their meaning, so the colour
    space, decode array and `/Mask` stay, but for packed RGB, which becomes grey with one decode
    pair. Group 4 wins on scans, whose ragged edges defeat Flate; on clean computer-drawn 1-bit
    art Flate can be smaller. Not yet: JBIG2 images themselves (left as they are, neither
    downsampled nor stored again, though `Document::decoded_image` reads them), inline images, an image's own `/SMask` or `/Mask`
    image (only images drawn on a page are visited), and Group 4 for rows wider than 32,767
    samples.

  - Lossless JBIG2 uses bounded generic-region encoding or exact-copy symbol dictionaries when
    smaller. No lossy symbol substitution is used. Export reads embedded images and bounded
    shared globals.
- **Discard objects:** thumbnails, alternate images, document tags, print settings.
- **Clean up:** Flate for streams with no filter; for streams with an outer ASCII85 or ASCIIHex
  layer, that layer is removed when the result is smaller (the inner filters keep their encoded
  bytes; streams with `/DecodeParms`, images and object streams keep their ASCII layer. LZW-compressed
  streams, content and images alike, are decoded and stored with Flate instead (Acrobat's "In
  streams that use LZW encoding, use Flate instead"): a predictor carries over to Flate without
  `EarlyChange`, filters applied before the LZW one go with it and those after it keep their
  bytes. A stream whose LZW data doesn't decode cleanly is left as it is. Not yet: inline images.

The engine runs Remove Hidden Information (`pdfcraft-redact`) for the user-data categories,
then this, then merges identical objects and writes a full, compressed save
(`pdfcraft_engine::optimizer::OptimizeJob`, which the UI runs on a worker thread with a
progress bar). JPEG decoding comes from `zune-jpeg` (the decoder behind `image` and the
renderer), JPEG encoding and resampling from the `image` crate.

## Target PDF version: partial compatibility

The target selects the header version, clears the catalog `/Version`, controls object
streams (disabled for PDF 1.4), and checks encryption requirements. It does **not**
detect or convert content newer than the target: optional content, JPEG 2000 images,
16-bit images, OpenType fonts and PDF 2.0 features can remain. A PDF 1.4 header
therefore does not guarantee compatibility with PDF 1.4 readers or validators.
`optimize.compatibility-level` remains partial until content compatibility is checked.