The optimizer README's and optimize.mono-compression's "not yet" lists
said rows wider than 32,767 samples aren't stored. That is Group 4's
limit (MAX_G4_COLUMNS); JBIG2 takes rows of up to 1,048,576
(MAX_JBIG2_COLUMNS). Found by CodeRabbit on #4805.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
Export ▸ Images and Save Image As decoded an image with
Stream::decoded, which reads /DecodeParms only when it is direct. An
image whose PNG predictor came by reference (the dictionary, an entry
of an array, or the numbers inside) kept its row tags in the samples,
and the picture came out shifted. The same was true of an indexed
image's lookup table given as a stream, and of a JBIG2 image's
/JBIG2Globals stream, which then couldn't be read, so the image was
skipped. All three now decode through Document::with_direct_parms
(#4304), as the optimizer does, and a test exports each. Found by
CodeRabbit on #4805; the image decode was already this way on main.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
fa.tsv lacked the row: Persian came to main after it was written. It goes after "CCITT Group 4",
worded like the Arabic and Kurdish rows. id.tsv had it as an English copy beside rows it
translates; it now says "tanpa kehilangan", as de, tr and vi translate "lossless".
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
JBIG2 images, and JBIG2 stencil masks, were reported as "can't be exported
yet", so an image the Optimizer stores as JBIG2 would stop exporting. They
are now decoded with hayro-jbig2 (already in the tree through hayro), with
their /JBIG2Globals from a DecodeParms dictionary or array, as JBIG2Decode
gives them: black as 0 (ISO 32000-2 §7.4.7). Unreadable globals, a JBIG2
page of another width, or fewer rows than the image skip the image; rows
past its height are dropped, so the output is bounded by the checked size.
docs/pdf-spec-parity.md §7.4 no longer says there is no JBIG2 encoding.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
pdfcraft_filters::encode_jbig2_generic writes 1-bit rows as a JBIG2
stream for JBIG2Decode (embedded organisation: a page information
segment and an immediate lossless generic region, no globals): template
0 with its nominal AT pixels, typical prediction, and the MQ arithmetic
coder (mq.rs), written from the JBIG committee's ISO/IEC 14492 Final
Committee Draft. The coder reproduces its Annex H.2 test sequence byte
for byte; output round-trips through hayro-jbig2, and Poppler renders
it the same as the original.
The optimizer's Monochrome Images gets JBIG2 (lossless) beside CCITT
Group 4 (still the default), doc_optimize mono jbig2; a document below
PDF 1.4 gets /Version /1.4 in its catalog. On 300 dpi text JBIG2 is
about a third smaller than Group 4.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
docs/pdf-spec-parity.md's §7.4 row still said there was no CCITT
encoding; it names the Optimizer's Group 4 encoder now, with a status
line and a revision row.
From reviews with the pdfcraft-review skill.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
- Not only Export ▸ Images refuses a CCITT image until #4335: so does
everything that exports an image through it. Save Image As refuses
it, Copy Image fails, and Word, PowerPoint and HTML export leave the
picture out, with the page not reported. The optimize README and the
mono-compression parity note name them.
- optimize.mono-compression is partial now, so docs/target-app-parity.md
counts it on the table's own measurement: K Optimize and standards 15
shipped and 11 partial of 58 (35.3%), breadth 57.0% (423 + 75 of 808),
mainstream 63.3% (292 + 45 of 497), with a status line and a revision
row. ROADMAP.md's breadth rows and its K row say the same.
From reviews with the pdfcraft-review skill.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
The optimizer's images decode no further than twice their samples plus
a byte a row, meant for ASCIIHex text under Flate; but hex text broken
into lines, as it usually is, is a little more than twice, so such an
image was left alone as if it were a decompression bomb (a 300 dpi
letter scan stayed Flate). It is three bytes for each now, a separator
for every two digits, and a test stores both images as hex text in
lines of 64 digits.
From reviews with the pdfcraft-review skill.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
- Redaction doesn't decode CCITT, so a mark over part of an image the
optimizer stored as Group 4 removes the whole image (nothing leaks),
and Export ▸ Images refuses it. The optimize README and the
mono-compression parity note say so. Later PRs of this stack add both
(#4335 export, #4384 redaction).
- doc_reduce's description, Engine::reduced_bytes and docs/cli-batch.md
now list the black-and-white step; docs/target-app-parity.md's
optimize row gives the measured counts and no longer lists CCITT as
missing; the M11 milestone row lists it as done.
From reviews with the pdfcraft-review skill.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
A test now covers what qualifies and what doesn't: an ICC profile of
one component and a DeviceN of one colourant convert, three components
and two colourants (more than a bit a pixel) don't; an image mask
converts with /BitsPerComponent 1 given, not with 8; an image of exactly
80 million pixels converts, one row more doesn't. The byte totals are
checked exactly. Each of those rules could be broken before with no
test failing (cargo mutants). one_component's comment now says /G
counts with DeviceGray, as the code does.
From reviews with the pdfcraft-review skill.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
A 1-bit image was decoded for Group 4 up to MAX_DECODED (1 GiB), so a
few kilobytes of Flate could cost a gigabyte, and the same held for the
samples of a colour or grey image read to resample it (pixels). Both now
stop at twice the samples plus a byte a row and 4 KiB, as redaction
does; data past that can only be a decompression bomb, and the image is
left alone.
From reviews with the pdfcraft-review skill.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
The decoders leave /Crypt out wherever it stands (Stream::filters), so
a chain of /Crypt and eight other filters decodes, but with_direct_parms
counted nine and left its parameters as they were: a predictor given by
reference was then skipped. Only the other filters count now, and a
/Crypt entry is null in the copy, as no decoder reads it. Tests cover
that chain and one exactly as long as a decoder takes.
From reviews with the pdfcraft-review skill.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
Document::with_direct_parms resolved an indirect /DecodeParms and its
array entries but not the numbers inside (/Predictor 9 0 R), which
Dict::int doesn't follow. A 1-bit image with such a predictor was
decoded without it, its rows shifted by their tag bytes, and Group 4 of
that stored in its place; resampling read images the same way. It now
keeps, of each parameters dictionary, the numbers and flags the decoders
read, resolved, and /JBIG2Globals as a reference. Only those small
values are copied (an entry that is no dictionary is null), so a file
naming one big object from every key and filter can't have it copied a
hundred times.
The change is #4384's, moved down so that every PR stacked on this one
reads such parameters.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
Persian came to main after these rows were written, so fa.tsv had neither "Monochrome Images"
nor "CCITT Group 4". They go beside "Grayscale Images", worded like the Arabic and Kurdish rows,
with the Persian digit the catalogue uses elsewhere ("AES ۱۲۸-بیتی").
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
Stream::decoded reads only direct parameter dictionaries, so an image
whose /DecodeParms is a reference (whole, or as array entries) was
decoded without its predictor. For a 1-bit image with a PNG predictor
the rows came out shifted by their tag bytes, Group 4 of that was still
smaller, and the picture was replaced by a skewed one; resampling and
merging image strips read the same way.
pdfcraft_cos::Document::with_direct_parms gives the stream with the
parameters its filters use made direct: only the entries at the
filters' places, and none for a chain longer than any decoder takes,
so at most MAX_CHAIN objects are copied. The optimizer's pixels() and
the Group 4 step decode through it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
A bare /Indexed, /I or /CalGray is no colour space on its own, so it can
only name a resource, which might be RGB: such an image is now left
alone instead of being read as one bit per pixel. doc_optimize refuses a
mono that isn't an object or a compression that isn't a known name,
instead of reading it as the default (from CodeRabbit's review).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
pdfcraft_filters::encode_g4 encodes packed 1-bit rows as Group 4 (ITU-T
T.6, /K -1) through the fax crate (MIT, already in the tree via tiff),
with rows capped at 32,767 samples so its 16-bit positions can't
overflow; round trips are checked against hayro-ccitt.
The optimizer (Settings::mono, CCITT G4 by default, so Reduce File Size
too) re-encodes a 1-bit image of one colour component, or an image
mask, stored with no filter or general-purpose ones, when that is
smaller as stored. The samples decode to the same bits, so colour
space, decode array and masks stay. PDF Optimizer gets a Monochrome
Images row and doc_optimize a mono option. optimize.mono-compression
goes from planned to partial (JBIG2 and monochrome downsampling not
yet).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
* Make PdfCraft's app colour red
The icon tile, the Windows PDF file icon's badge and lines, the DMG background and the README
badges move from green #12a58a to crimson #b70228 (darker shade #8a011e, fold #f3cfd6).
Every PNG, .ico and .icns is re-rendered from the edited master SVGs with packaging/icons.sh
and resvg 0.47; the .icns is written with Pillow because iconutil is macOS-only, with
iconutil's size set. The DMG background is re-rendered with generate.py; its .DS_Store is
unchanged. ATTRIBUTION.toml hashes updated; cargo xtask assets passes.
* Fix OCR model attribution hashes
From the review of #5228. The finished CMYK group was drawn through
whatever paint transform a preceding shading pattern left on the
context, so its cyan half showed magenta. Hayro patch (27) now resets
the paint transform before drawing the group's pixels.
Two regression tests, both reported in that review:
- a pattern painted before the group (fails without the reset);
- the Color blend mode over an empty CMYK group, swept over all 256 K
levels (failed on nine levels before #5199's vello_cpu fix was merged
in; passes with it).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SqmHYx8FiWM5PcsoiErgp9
Resolves test-file conflicts where main and this branch both appended tests:
main's file plus this branch's appended tests, unchanged.
fmt, clippy -p pdfcraft-forms -p pdfcraft-automation, and both crates' tests pass.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SqmHYx8FiWM5PcsoiErgp9
Resolves test-file conflicts where main and this branch both appended tests:
main's file plus this branch's appended tests, unchanged.
fmt, clippy -p pdfcraft-forms -p pdfcraft-automation, and both crates' tests pass.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SqmHYx8FiWM5PcsoiErgp9
Resolves test-file conflicts where main and this branch both appended tests:
main's file plus this branch's appended tests, unchanged.
fmt, clippy -p pdfcraft-forms -p pdfcraft-automation, and both crates' tests pass.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SqmHYx8FiWM5PcsoiErgp9
main's knockout patch (hayro (22)) draws each element of a knockout group
once in erase mode, to clear what the group drew under the element's shape.
An isolated DeviceCMYK group nested in such an element still took the CMYK
path in that pass, and drew its finished pixels with Normal blending over
what should have been cleared. draw_isolated_cmyk_group now declines while
erasing, so the group's contents are interpreted in erase mode as before.
The new test fails without the fix (the centre shows red through the
magenta: [240, 63, 168] against [245, 127, 197] for the DeviceRGB control).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SqmHYx8FiWM5PcsoiErgp9
main has taken hayro-interpret patches up to (66) and hayro up to (25)
since #3777 was opened, and open PRs claim hayro-interpret (67)-(69) and
hayro (26). The isolated DeviceCMYK group patches become hayro-interpret
(70) and hayro (27). vendor/README.md names the tests by their new path,
raster::tests::isolated_cmyk_groups.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SqmHYx8FiWM5PcsoiErgp9
Review of #3777 (test report by mtlcl410).
- A group wider than about 512 device pixels lost its blend mode in the
tiles that a paint covers completely: on the bare pass canvas, vello_cpu
fills such a tile without the blend mode. At 300 dpi, magenta then black
with Difference drew black in the middle of the group, not green. Each
ink pass now draws inside a layer of its own.
- A nested isolated group that names another blending space (for example
/CS /DeviceRGB) blends in that space (ISO 32000-2 §11.3.4). The
interpreter now tells the device about such a group
(Device::group_blends_outside_device_cmyk), and a pass that meets one
declines, so the enclosing group is drawn as before. A non-isolated
group's /CS is ignored (ISO 32000-2 §11.6.6, Table 145, CS: it takes its parent's space), so
it stays in the enclosing group's CMYK.
Test: raster::tests::isolated_cmyk_groups_blend_at_any_size_and_respect_nested_spaces.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Review of #3777. `Color::ink_tints` no longer gives tints for a
four-component ICCBased colour. Such a colour keeps its own profile, so a
group that holds one is drawn as before. vendor/README.md: the hayro
patch (21) entry refers to hayro-interpret patch (45), not (44).
ISO 32000-2 §11.3.4: the elements of a transparency group blend in the
group's colour space. For a subtractive space, each component is
complemented before the blend function and again after it. §11.3.5.3:
the nonseparable modes blend C, M and Y as their complements R, G and B,
and K comes from the backdrop (Hue, Saturation, Color) or from the source
(Luminosity). PdfCraft converted each colour to RGB and blended in RGB.
A print test file's blend-mode patch then showed an X in almost every
cell: magenta under black with Difference stayed magenta, not green.
hayro-interpret patch (45): CmykGroup and Device::draw_isolated_cmyk_group
(default false) for isolated, non-knockout groups with /CS /DeviceCMYK.
interpret_form_contents is now a function of its own. Color::ink_tints
and color::cmyk_to_srgb8 are new.
hayro patch (21): the renderer draws such a group as a CMY pass and a K
pass of complemented tints. It converts the tints to RGB with the CMYK
profile and composites the result through the group's layer. The group
is drawn as before with reading colours, for contents without process
tints (RGB, spot colours, patterns, images) and above 2^24 pixels.
Test: raster::tests::isolated_groups_blend_in_device_cmyk.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M5: Import comments takes another PDF and copies its comments onto the same pages
Import comments read only XFDF, FDF, XML, XDP, CSV and text data files.
It now also takes a PDF: each comment of that PDF is copied onto the
page with the same number, at the same place, with its appearance
stream, its pop-up, its replies and its layer. Comments on pages past
the document's last page are left out, together with replies to them.
Links, form fields and redaction marks are not copied. A comment named
like one already on its page replaces it, as an XFDF or FDF import
does. A PDF without comments is refused with "nothing in the file
matches this document", and a PDF that needs a password is refused.
- organize: import_comments copies the comments with the page copier
that Insert Pages uses, and registers the layers they use.
- engine: Edit::ImportData reads a file that starts with %PDF- as a PDF.
Any other file goes to the data importer first, and is read as a PDF
when that fails, %PDF- occurs in its first 1,024 bytes and the PDF
reader opens it.
- ui: Comments > Import comments lists .pdf files; form.import_data
lists the same files as before.
- automation: the doc_import_data description names the PDF case.
- parity: comment.import-from-pdf is shipped.
* Import comments: an annotation that is no comment keeps its name
A comment imported from a PDF replaced any annotation of the same /NM
on its page that was not locked, a redaction mark or a widget, so a
link, screen or 3D annotation of that name was overwritten. Only an
annotation whose subtype is one of the copied comment subtypes is
replaced now; for any other, the copy is added beside it without the
name. The subtype is read through an indirect reference.
* Import comments: index each page's annotations instead of scanning them per comment
* Import comments: a layer that BaseState OFF hides stays hidden
* Import comments: a PDF with binary bytes before its header imports on an XFA form, and two comments with one name both land
On an XFA form, a decode failure no longer stops the import when a PDF
header is in the first 1,024 bytes; the PDF's comments are copied. Two
incoming comments on one page with the same /NM no longer replace the
same comment: the first replaces it, and the second is added without
the name.
* Import comments: an inline annotation on the page is replaced by name
An annotation written inline in a page's /Annots is made an indirect
object before names are matched, so an incoming comment with its /NM
replaces it instead of being added beside it.
* Import comments: two new comments with one name keep it once
When no comment on the page has the name, the first incoming comment
keeps its /NM and each later one with the same name is added without it.
