INSTALLPDFCONTEXTMENU defaulted to 1 on every install, so an upgrade without
INSTALLPDFCONTEXTMENU=0 brought "Edit with PdfCraft" back. It now works like the desktop
shortcut since #1570: no static default, and a SetProperty after AppSearch turns it on for a
first install and, for an update, only while the menu's key is still in HKLM. A value on the
command line still wins.
"Create PDF with PdfCraft..." for the ten image types moves out of PdfcraftApp into its own
PdfcraftImageContextMenu component, gated by a new INSTALLIMAGECONTEXTMENU that defaults and is
remembered the same way. Moving the rows is safe because MajorUpgrade removes the old version
before installing (afterInstallValidate).
The PDF menu first shipped in 0.7.1 and the image menu in 0.4.0, so a missing key can also mean
the installed release never had it. OnlyDetect Upgrade rows (PDFCONTEXTMENURELEASE,
IMAGECONTEXTMENURELEASE) tell those apart, so updating from 0.6.0 still adds the PDF menu.
test-msi.ps1 evaluates the SetProperty and component conditions for the desktop shortcut and
both menus (first install, =0, update with and without the item, =1, and an update from a
release without the menu), and checks the registry searches, the Upgrade rows, that no image row
is left in PdfcraftApp, and the RemoveExistingProducts scheduling.
README documents the three properties, pinning the SHA-256 because same-version MSIs replace
each other silently, and the signing identities (checked against the v0.7.1 files).
docs/releasing.md and the misc.installers parity note follow.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A widget with no appearance to draw (none stored, or none for its selected
state) was removed from the page and the field tree with nothing in its
place, so the field's value was lost; a reply kept because it could not be
drawn was then deleted anyway as a reply of the flattened comment. Both now
stay as they are. A widget whose appearance draws nothing is still removed,
as is a reply note's empty appearance with its comment.
Claude-Session: https://claude.ai/code/session_01RUNQSPVXx3dDBabRZHAnjz
Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
The effective-resolution walk skipped any form XObject already visited
once when it was nested more than four deep, with one seen-set for the
whole document. A later, larger use of the same form was never measured,
so Reduce File Size and Optimize PDF resampled the image for its smallest
use: a 1200 px image drawn 1 in and 8 in wide through six nested forms
came out 150 px wide, about 19 ppi on the large copy.
- Cycles are detected on the current path of forms, not document-wide.
- A form with its own resources drawn again at the same scale (only
moved) is skipped, as that can't change any image's resolution; forms
without resources draw their caller's images and are always walked.
- Repeat walks are capped at 100,000. If the cap or the 12-level depth
limit leaves a use unmeasured, every image gets INFINITY: recompressed
as the settings say, never resampled.
Fixes#1811
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Compare files: side by side, scrolled and zoomed together
After Compare files, when the old version is open in a tab and the window is
at least 1000 px wide, the document area splits: the old file on the left, the
new on the right, each a page view with its own shading (deleted and replaced
on the old, inserted and replaced on the new, visual differences on both). The
half under the pointer leads; the other takes its zoom, fit, layout and
rotation, and its scroll offset on the next frame. A change clicked in the
panel jumps both halves; Side by side / New file only toggle the mode; Clear
ends it. The old file keeps rendering while shown. Rows in every language,
parity misc.compare-side-by-side shipped.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* ATTRIBUTION.toml: the language files' checksums after the new rows
cargo xtask assets checks each catalog's sha256; the rows this branch adds
changed the files without updating it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Refresh catalog hashes after merging main
---------
Co-authored-by: Osvaldo Duran <338149330+regendorf-ux@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Wayland compositors leave momentum to the client: libinput reports the
swipe as pixel deltas and the lift as an axis stop (TouchPhase::End), and
the page view stopped dead there (#1708). It now measures the gesture's
speed over its last 0.1 s and keeps scrolling through the #759 1:1 path,
slowing with a 0.35 s time constant.
- No glide for a slow drag, a pause before lifting, zoom or Shift swipes,
single-page paging, or with Animation effects off.
- Any wheel input, click, key, zoom, dialog or the document's edge ends it.
- Off on macOS (it sends its own momentum) and the web; Windows and X11
report no touch phases through winit, so nothing starts a glide there.
Not yet: fingers resting on the touchpad don't catch the glide; that needs
Wayland hold gestures, which the vendored winit doesn't bind.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
doc_audit_redactions and `pdfcraft-cli audit` returned rectangles in PDF
user space (origin at the bottom-left of the media box), while comment_list,
doc_info, text_lines and the redaction tools give points from the top-left
of the page as displayed. The same mark read [144.14, 91.2, 265.95, 102.2]
in comment_list and [144.138, 739.8, 265.952, 750.8] in the audit.
Both surfaces now convert with the helper doc_info uses (view_rect, made
public for the CLI), so they report the same rectangles, after /Rotate.
The CLI reads the page geometry only when there is a finding to place.
AuditFinding::rect stays in user space; the audit README says which space
each surface uses.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: OpenAI Codex <noreply@openai.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* fix(a11y): bookmarks from structure keep the words of glyph-by-glyph headings
Chromium (Skia) draws text one glyph at a time, each moved into place with
its own Td. The marked text of a heading added a space at every Td, TD, T*
and Tm, so New Bookmarks from Structure titled them "C h a p t e r T w o",
and the real spaces between words were lost. On a 20-page tagged guide
printed by Chromium, 25 of 61 titles came out spaced.
mcid_texts now follows the text matrix (and the CTM, q/Q, Tc, Tw, Tz, TL)
and decides word breaks from where the glyphs are: a glyph that starts on
another line, more than 0.2 em after the previous glyph of the same marked
content, or back over more than an em, starts a new word. Kerning and
glyph-by-glyph placement no longer split words.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(a11y): headings set with a negative font size keep their words
The em that decides word breaks was the font size times |Tz|, negative with
a negative font size: every glyph then started a new word, and a heading in
one Tj read "C h a p t e r O n e". The em is now |size x Tz|, and "ahead"
follows the way glyphs advance in text space, backwards when the size or Tz
is negative, so a TJ word space still splits words there as on main.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(a11y): keep wrapped headings separate under horizontal scaling
Co-Authored-By: OpenAI Codex <noreply@openai.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: OpenAI Codex <noreply@openai.com>
* fix(audit): an applied redaction at the end of a line is not a faux redaction
After Apply Redactions removes text at the end of a line, the line keeps a
TJ adjustment where the text was, and the box of the line still spans it.
The audit compared the redaction box with that box: at the end of a line
it covered more than 40% of it and the words left beside it were reported
as covered text, on a correctly redacted file. In the middle of a line the
gap was usually too small to cross the threshold.
Text lines now also give the boxes of the words they draw (`ink`: glyphs,
without spaces and TJ adjustments), and the audit measures how much of
those words a cover hides. A real cover over text that is still there is
found as before.
doc_audit_redactions also reports its rectangles in top-left-origin points
like comment_list and doc_info; they were in PDF user space.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(audit): leave the rectangles of doc_audit_redactions in user space here
Reporting doc_audit_redactions rectangles in top-left-origin points is a
separate subject from the false alarm this branch fixes, and on its own it
made the tool and `pdfcraft-cli audit` disagree on the same file: the CLI
still prints PDF user space. Take it out of this change; the tool and the
CLI can move together in their own change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(edit): word boxes span whole words when glyphs run backwards
With a negative font size or a negative horizontal scale (Tz), each glyph
advances backwards along the text matrix, and the box of a word kept only
its first glyph: the end of the word was compared with a start that had
already moved past it. A word box is now the union of its glyphs whichever
way they go, and a TJ adjustment ends a word past 0.2 em of the scaled size,
whatever its sign.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(audit): a cover over a short value after a long label is still found
Measuring a cover on the words of a line alone missed faux redactions main
found: a long label followed by a short value hidden under the box is less
than 40% of the line's words. A cover now also counts, as before, when it
hides 40% of the line's box and at least half of one word still drawn; a
cover over the gap an applied redaction left, with no word under it, still
does not. The audit README states both rules.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(audit): retain partial-value cover detections
Co-Authored-By: OpenAI Codex <noreply@openai.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: OpenAI Codex <noreply@openai.com>
* M11: merge image fragments, and the Standard and Mobile optimizer presets
Some PDF printers draw a page picture as thousands of images one pixel row
high (one real page: 3,300 strips, 4.3 MB). The optimizer works image by
image, a one-row image can't be resampled, and every JPEG strip carries its
own headers, so Reduce File Size saved 2 bytes on it.
- pdfcraft-optimize `fragments` (Settings::merge_fragments, on by default):
runs of `q … cm /Im Do Q` drawing upright 8-bit grey or RGB images in one
colour space, sharing their left and right edges and stacked edge to edge
(at least four, nothing else drawn between them; or, failing that, the
rows drawn one under the other up to a gap) become one lossless image at
their finest resolution. The image settings then resample it, and Clean
Up drops the strips. A page whose content can't be read back exactly is
left alone.
- Presets as in Acrobat's Settings menu: Standard (Reduce File Size's
choices) and Mobile (images above 144 ppi to 96 ppi, JPEG high). The PDF
Optimizer dialog has a Settings menu (Custom once an option changes) and
a Merge image fragments box; doc_optimize takes preset and
merge_fragments and reports merged_images and fragments_merged.
- A progress stage for the merge; four new strings in all 21 catalogs.
On the real page: Standard/Reduce 4.3 MB → 231 KB, Mobile → 161 KB, with
a rendering closer to the original than Acrobat's Mobile result (147 KB).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Refresh catalog hashes after merging main
---------
Co-authored-by: magdale76 <16279778+magdale76@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* M2: Add word and character counts with optional content exclusions
Retain the complete reviewed change, including prior integration resolutions,
on current upstream.
M2: Add document word counts and semantic exclusions
* Refresh catalog hashes after merging main
---------
Co-authored-by: LabDennis <341377186+LabDennis@users.noreply.github.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Field detection read only vector data: text-layer words and drawn
rectangles and lines. A scanned form is a single picture, so it found
nothing there.
A page that an image covers at least half of, and whose content draws
no lines, is now rendered at 144 dpi and its shapes are read from the
pixels (pdfcraft_forms::detect::raster): ink against a local mean,
long thin runs as lines, enclosed rectangular patches of paper as
boxes, the empty band of a box with a small printed label as its
writing area, and the open-ended horizontal lines as rules. Labels come
from the text layer, else from OCR when the models are installed;
without either the fields get default names. Detection works in the
displayed frame, so a scan stored sideways reads like any other, and
fields on a turned page get /MK /R so typing reads upright.
generated with Claude Code
* M5: Fill & Sign text reads across on rotated pages
Typed text, dates and text boxes ignored the page's /Rotate, so on a
page stored sideways (common for scanned forms) the text came out
sideways. The box now follows the displayed axes, the annotation
records the turn in /PCTextRotate and its appearance is turned back
with a form /Matrix, as stamps and image signatures already do.
Callouts keep user-space axes. The headless fill_sign_add tool gets
the same layout.
generated with Claude Code
* chore: credit alexanderalber in the About window
generated with Claude Code
Submit highlight comment text and replies with Ctrl+Enter, retain Command+Enter
for floating composers, and let Shift+Enter insert reply newlines. Keep ordinary
Enter-to-post for replies and restrict submission to the focused editor.
Add UI regressions and parity evidence. Normalize existing lint and formatting
issues and pin the reload test's English labels so the required checks pass on
this Windows machine.
Co-authored-by: Armin Reisgys <Armin.Reisgys@de.bosch.com>
Co-authored-by: OpenAI Codex <codex@openai.com>
Co-authored-by: Luchsen <210128845+Luchsen@users.noreply.github.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Every test that wanted an external oracle probed for it by hand and chose for itself what to do
when it was missing. The common choice -- print a line and return -- reports as a pass, so a suite
with no oracles installed looked exactly like one in which every oracle agreed.
That was not hypothetical. No CI runner installed qpdf, so `qpdf_agrees` had never executed on a
runner, while README.md said saved output was "independently checked with qpdf". For R2-R4 that
test is the only check of owner-password authentication (Algorithm 7) that does not go through our
own code.
`pdfcraft-oracle` holds the probes and one rule: a missing oracle is a declared skip or a failure,
never a silent pass. `PDFCRAFT_ORACLES_REQUIRED` picks which, on the same convention as
`CRAFT_FONTS_REQUIRED`. CI installs qpdf and sets it, so a skip notice there is now a red build.
The crate has no panicking path of its own; `or_skip!` expands its assert into the caller, which
is test code.
Verified by running the qpdf tests against qpdf 12.4.2 for the first time -- they pass, so the
README claim is now both enforced and true. Both gate directions were watched: absent and
unrequired skips with a notice, absent and required fails with the install command in the message.
Only qpdf is installed in CI, because it is the only tool the test job uses. The Poppler pixel
comparison in crates/organize stays ignored until a change turns it on and verifies it there.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Reorder document tabs by dragging while keeping the active document and its view state. Add Ctrl+Tab and Ctrl+Shift+Tab cycling in visible order, including Combine files, and translate the menu labels.
Keep timestamped batch test expectations tied to the originally generated PDF bytes.
Closes#1537Closes#1542
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A font the document does not embed was replaced by whatever the caller
happened to pick, and nothing told the user. `doc_info` said only
`embedded: false`, which is why "my Chinese PDF shows nothing" has been
a mystery rather than a sentence.
`crates/fonts/src/fallback.rs` applies one chain, in a documented order,
and returns what it chose with a reason:
1. embedded -> nothing substituted;
2. /BaseFont names a standard-14 face or a known alias (exact metrics);
3. craft-fonts holds that exact family;
4. /CIDSystemInfo /Ordering names a script we have a face for;
5. the ordering names a script we have no licensed face for -- report
none, so nothing is drawn rather than the wrong glyphs;
6. otherwise the nearest of the fourteen by descriptor flags.
It delegates to the existing per-script selectors instead of restating
their order, so each keeps one source of truth. It answers the
dictionary question only; "which face has a glyph for this character?"
depends on the string being drawn and stays where the drawing happens.
`doc_info` gains `substitute` and `substitution` per font. Both null
means the document's own glyphs are shown; a null `substitute` with a
reason means no face was available at all. That is Acrobat's Actual
Font, minus the interface, which `parity/` now records as still missing.
Two findings on the way:
`Std14::from_base_font` matches loosely, so "SomeHouseSerif" resolved to
Times by its name containing "serif". The face is a fair guess but
reporting it as "names one of the standard 14" would have been untrue of
a font nobody has heard of. `Std14::recognise` now says whether a name
matched an alias or only a family hint, and the two report differently.
`from_base_font` is unchanged.
The generated table moved to `crates/fonts/src/std14_metrics.rs`, data
alone, and the ATTRIBUTION entry and AGENTS.md 1.1 line follow it. F1
put the hash on a file holding both the table and the code reading it,
so this commit's ordinary edits tripped the gate -- and a hash that
churns on unrelated changes gets re-attested reflexively, which is the
protection gone. Verified both directions after the split: editing
std14.rs passes the gate, changing one width in std14_metrics.rs fails
it.
Every new test was watched failing first: removing the script step
breaks the two unit tests and the doc_info integration test.
Co-Authored-By: Claude <noreply@anthropic.com>
Adopt the canonical craft-print revision from craft-libs #28 so Windows printing uses the in-process Windows.Data.Pdf/XPS backend instead of PowerShell. Keep exact paper, orientation and scaling validation and the existing PDFCraft composition and permission checks.
Pin the reviewed winprint fork, scope its compile-time licence/advisory exceptions, and distinguish the earlier WDAC Sandbox exercise from the final pinned revision's Windows CI coverage. Physical printer output remains unverified.
Add worker-barrier regressions for Home-selected tool handoff and startup document ordering.
Fixes#1107
Co-authored-by: durtyrobbin <76844303+durtyrobbin@users.noreply.github.com>
Co-authored-by: Dimitar Klaturov <7221384+bulgariamitko@users.noreply.github.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: skylar taylor-barrick <hi@skylar.cc>
Carry selected tool actions through native file preparation, password retries and conversion, and defer startup intake until pending native opens finish.
Await observable completion in native opening, password, recovery and linked-PDF tests while retaining their content, identity, dirty-state, cancellation and destination checks. Verify the expected validation error and preserve the original document after refused consent targets.
M3; refs #1914.
A stamp placed on a page with /Rotate was drawn in user space, so the
label or picture turned with the page. Counterrotate the appearance so
it reads upright as the page is displayed.
Co-authored-by: Brandon Thomas <echelon@gmail.com>
- Create PDF detects BigTIFF (II+/MM+) as well as classic TIFF; the tiff
decoder already reads it, so these scans now convert instead of being
refused.
- Image detection accepts only GIF87a/GIF89a, the headers conversion
decodes, so a malformed GIF header is no longer called an image and then
rejected with a misleading error.
- file-format-parity.md: XDP split into XFA data import/export (shipped
under form.xfa-data) and opening .xdp as a document (none).
Tests: bigtiff_images_become_pages; malformed GIF headers in
source_kind_tells_pdfs_images_and_text_apart. Both fail without the fix.
Claude-Session: https://claude.ai/code/session_01F8DFYWkDyTnEcin9PNkUW5
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
`set_info` changed only `/Info`. Files that carry XMP (LibreOffice and Word
exports, PDF/A) kept the old dc:title and dc:creator, so viewers that read
XMP first kept showing the old title, and PDF/A preflight reported the two
as different (6.6.3).
The matching XMP property (Title dc:title, Author dc:creator, Subject
dc:description, Keywords pdf:Keywords, Creator xmp:CreatorTool, Producer
pdf:Producer) is now replaced where it stands, added in a description of
its own, or removed with an empty value. The packet is edited as text and
the rest of it stays byte for byte; files without XMP get none, and a
packet that isn't UTF-8 is left as it was.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* M8: redaction unlinks removed images and forms from inherited and shared resources
Apply Redactions and Remove Hidden Information give a rewritten page its own
pruned /Resources, but the dictionary the page drew through before could still
name the image or form that was removed:
- a /Resources inherited from a /Pages node;
- one resource dictionary object shared by several pages;
- the page's own dictionary, when a form without /Resources drew the image
through it.
A full-rewrite save keeps whatever is still referenced, so the removed image
samples and form text stayed in the saved file while the operation reported
success. Per-page resources (the case fixed in #1099) were not affected.
The interpreter now records the original object behind every XObject it drops
or replaces. After the page loop, each page-tree resource dictionary that still
names one loses that entry unless a page drawing through that dictionary still
draws the name (the same image on another page, or again outside a mark). A
dictionary that loses an entry is replaced by a private copy on its node, so a
dictionary object shared with other nodes is left alone for them. If a page's
use of a name cannot be told (unreadable content, a form that will not decode),
the operation fails closed.
Tests: redacted_xobjects_do_not_survive_through_inherited_or_shared_resources,
an_image_another_page_still_draws_through_the_same_resources_is_kept,
an_image_a_form_drew_through_the_pages_resources_does_not_survive,
a_hidden_layers_image_does_not_survive_through_inherited_resources.
Not covered here: originals named by a form XObject's own /Resources, by an
annotation appearance or by a pattern.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M9: a cross-reference entry the reader sets aside is never an unchanged signed object
The reader that judges post-signing changes and the renderer that draws the
page resolve some cross-reference entries differently. A revision appended
after signing could redefine a page's content stream and give the object an
entry the reader sets aside while the renderer follows it:
- an in-use entry at offset 0 (the reader skips it; the renderer fails to read
the object there, rebuilds its index and takes the last definition);
- a second entry for the same object in one section (the reader keeps the
first, the renderer the last).
The classifier compared the signed object with itself, found nothing changed
and reported the signature Valid while the page showed the new content.
pdfcraft-cos now records the entries it does not take at face value
(Document::xref_oddities: offset-0 in-use entries other than object 0,
duplicate entries that differ, reserved cross-reference stream types, and a
hybrid /XRefStm entry that disagrees with the table), and can say whether an
entry locates the object itself (Document::xref_entry_is_exact). What it
resolves is unchanged.
classify_changes treats any such entry added after the signed revision as a
change that is never permitted (page content when the object was a signed page
or its content, other changes otherwise). An object whose content compares
equal at a new place is unchanged only when its entry is exact: where the
reader had to search for the object, another reader may arrive elsewhere.
Tests: a_cross_reference_entry_the_reader_sets_aside_does_not_hide_new_page_content,
a_cross_reference_entry_that_misses_its_object_is_not_an_unchanged_object,
cross_reference_entries_that_are_set_aside_are_recorded,
an_entry_that_misses_its_object_is_found_by_searching_but_is_not_exact.
This closes the two demonstrated triggers and their near variants. It does not
prove that the two parsers agree on every file: other differences in what each
tolerates may remain.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M8: Apply Redactions is refused when the page still shows text under a mark
Redaction decides what lies under a mark from the positions its own
interpreter computes, and its verify pass reuses them. Where those differ from
the renderer's, a mark drawn over the text as displayed lies over glyphs the
interpreter places elsewhere, or does not see at all: they stayed in the file
and the operation reported success.
The case the test pins: a font and size set through an ExtGState /Font entry
(`gs`), which the renderer honours and the interpreter does not model. The same
kind of gap was observed for a font a form XObject takes from its caller, for
some predefined CMaps and for a rotated Type 3 font matrix. The standard-14
width error that first showed it is fixed at its root by d0d1ad81.
The engine now asks the renderer, which is what the user saw when placing the
marks. After redaction runs, the result is written as a save would write it
(without the marks' own overlay), its text is extracted, and a glyph still at
least half inside a mark fails the edit with the existing "could not be
verified" error. The edit runs on a copy, so the document is unchanged. A page
whose text cannot be read back fails the same way.
This makes such mismatches fail closed; it does not make those documents
redactable. Teaching the interpreter each of them is separate work.
Test: redaction_is_refused_when_the_page_still_shows_text_under_a_mark (the
line whose font is set by `gs` is refused and left unchanged; the same line set
with `Tf` is redacted).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix(edit): move existing text by its frame, and selections with the arrow keys (fixes#1520)
* docs(parity): arrow-key nudging and the paragraph frame are no longer gaps (#1520)
Two follow-ups the maintainer asked for after #1355.
The script session's worker now says when the engine is ready for the
script it was sent (its JavaScript context built; FormCalc at once),
and the script's time limit runs from then, with the engine's own
start limit before it, as the one-shot path always did: building a
context is not charged to the script, which matters on a busy machine.
A field inside an area shares its data node with a field of the same
name outside it (areas are left out of data paths). The in-place
refresh of the live form now follows the data path through the tree
and gives every field bound to the node the value the tree builder
would, each by its own template field (an exclusion group there means
a rebuild), and the engine's value setter, with an index of widgets by
data node, gives every widget bound to the node the value by its own
kind, hidden fields included, writing the data whenever the node's
text differs. The script's time now also starts after its host and
globals are set up. A stale parity note (choosing a picture for an
image field, delivered in #1175) is removed.
* fix(audit): a rectangle drawn as an m/l path is a cover like re (fixes#1510)
* docs(parity): a rectangle drawn as an m/l path counts as a cover (#1510)
Two gaps in code-to-Unicode, both found by probing the current
behaviour rather than by reading the code.
A font with no /Widths and no /ToUnicode fell back to StandardEncoding
whatever it was, so /Symbol code 0x61 -- `alpha` in Symbol's own
built-in encoding -- decoded as "a". ZapfDingbats and MacExpert were
read as Latin the same way. That map is what `redact` matches patterns
against, so a wrong character there is a silent redaction failure, and
a wrong character is worse than no character. Symbol, ZapfDingbats and
MacExpert now yield no mapping at all unless the font names a base
encoding, which is always honoured as the deliberate statement it is.
This keys on the base font *name*, not the /FontDescriptor symbolic
flag. A great many ordinary Latin TrueType subsets set that flag and
still rely on a Latin encoding, so suppressing on the flag would lose
real text across a large share of real documents. A test pins that
restraint so it is not "fixed" into a regression later.
Glyph names now follow the published naming algorithm instead of two
of its cases: a name is cut at its first `.` (`a.sc` is `a`), split on
`_` into components (`f_i` is "fi"), and `uniXXXX` carries any number
of four-digit values (`uni00660069` is "fi"). Names are resolved whole
or not at all, so half a ligature is never returned. `glyph_text`
returns a String for this; `glyph_unicode` stays as the single-character
view. Hex parsing rejects the leading `+` that `from_str_radix` would
otherwise accept, and a lone surrogate half.
Both halves were verified by reverting each fix and watching the
matching tests fail. The parity note on protect.redact-patterns now
says Symbol-encoded text is skipped rather than mis-decoded.
Still open, and an owner decision: Symbol and ZapfDingbats could be
mapped properly with a glyph-name-to-Unicode table, but the vendored
Adobe Glyph List is not on the AGENTS.md 1.1 closed list.
Co-Authored-By: Claude <noreply@anthropic.com>
* M12: preview text structure proposals for auto-tagging
* Auto-tag preview: no unregistered command, allowed on copy-restricted files like a11y.check
The preview is read-only with no UI command yet, like render_preview, so it no
longer names the Planned a11y.autotag catalog id (tool_table_is_well_formed).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M12: preview text structure proposals for auto-tagging
* Keep read-only auto-tag preview separate from unavailable command
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* M10: edit OCR text on scanned pages so the change shows
Editing a recognised word on a scan rewrote it as invisible OCR text, so
the page still showed the old word, and the whole OCR layer grouped into
one paragraph that rewrapped when one word changed.
- An edited invisible paragraph is drawn visibly, over a cover in the
paper colour sampled around it, in the scan's sampled ink colour
(or the chosen colour).
- OCR words group into phrases: a table cell or a tab stop splits them
and each scanned line stays apart; a phrase grows rightwards.
- Styled rewrites measure with the text matrix's horizontal scale, so
stretched OCR words keep their widths instead of overlapping.
- The inline editor covers the scanned word and grows like the result.
* M10: size OCR text from each word's letters
A word box from recognition is tight around the ink, but the text layer
assumed every box spans Helvetica's ascender-descender height. A
capitals-only word such as "DT" spans only the cap height, so its text
was set about 23% too small and its baseline floated up; editing it
then drew the new word visibly smaller than the scanned one.
The em and baseline now come from the word's letters: cap height or
x-height on top, descender or baseline at the bottom. On a real scanned
form, a rewritten "DT" -> "DSI" now matches the scanned word's height
and baseline. The engine OCR-edit tests build their words the way a scan
would box them.
* Edit OCR text: sample colours only for invisible blocks, from the current bytes
Session::apply looked up every edited block with a fresh text_blocks pass and
re-serialized the whole document to render the sampling tile. Text blocks are
now cached per page on the editor (keyed on the unmodified document's source
identity, so any edit, undo or save invalidates them), visible blocks skip
sampling entirely, and the tile renders from the document's current bytes.
Adds a visible stretched-text regression test and documents that editing any
invisible text makes it visible over a painted cover.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit OCR text: name the cached text-blocks tuple (clippy), rustfmt
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* M3: select an image on the page and copy it
Select tool: a click on a raster image selects it (also one drawn through Form artwork, or with
text over it such as an OCR layer); ⌘C copies it as a file in its original format (a JPEG as
stored in the PDF, otherwise a lossless PNG). Right-click ▸ Copy Image copies its pixels at full
resolution, and Copy Image in Original Format the file; Edit text & images has both for the
selected image. Both respect the document's copy permission.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GWUuTDPKL5wivnSJuCkC8Q
* M3: translate the copy-image strings into Czech, Kazakh, Slovene and Turkish
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GWUuTDPKL5wivnSJuCkC8Q
* Copy image: keep the clipboard file in a private per-user folder
Copy Image in Original Format wrote into the shared temporary folder
(/tmp/pdfcraft-clipboard) and deleted everything in it first, so another
user on the machine could plant a link or folder there and have PdfCraft
delete or overwrite their target. The file now goes in PdfCraft's
per-user cache folder (or the portable data folder), which is checked to
be a real folder and set to 0700 on Unix (refused when it isn't ours).
Only earlier copies (regular files named '<stem> p<N> img<M>.jpg|png')
are removed, links are never followed, and the new file is created with
create_new so it can't be redirected.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: escape Windows paths in synthetic GoToR file specifications
canonicalize() returns \\?\C:\... on Windows; unescaped backslashes in a PDF literal string become control characters, so link_open refused the target and main's Windows CI failed. Taken from #1359's helper fix.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* M7: preserve Arabic text order when copying and editing
Record per-line ActualText for shaped added text and preserve its logical order in Edit text. Cover mixed scripts, marks, copy/search, retyping and save/reopen; retain the drawing golden.
Assisted-by: Codex
* Edit text: keep only right-to-left ActualText out of line joining and bidi recovery
Word and Chrome wrap Latin ligatures in /ActualText spans mid-word; splitting
lines at every span broke such words into pieces in Edit Text. Only spans
whose ActualText has strong right-to-left characters keep their own line and
typing order now. Regression: a Latin fi ligature span stays on its line.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* XFA: one script thread per event, and the live form kept up to date in place
A form with hundreds of calculate scripts used to spend its open-time
budget on set-up: every script got a thread of its own, and the engine
dropped its live form after every value a script settled, rebuilding
the whole tree for the next script.
The js crate gains xfa_session::XfaSession: the scripts of one event
run on one thread (with the script stack), each in a fresh JavaScript
context or FormCalc interpreter on a copy of the form as the engine
holds it then, so scripts share nothing, a script that fails halfway
leaves nothing behind, and what a script changed reaches the next one
only through the engine. A script past its time limit is abandoned on
the thread and the session is dead from then on; a fault in the engine
(a panic) loses only that script, the thread is replaced. On wasm the
scripts run inline, as before.
The engine's runner keeps one session per event and, for a value, now
refreshes the one field in its live form in place (xfa::refresh_value,
computing the value as the tree builder would: saved values, template
defaults) instead of rebuilding the tree; rows, presence, access,
resets, relayouts and data rewrites still rebuild it. Under test, the
live form is compared with a fresh build before every script and at
the end of every event, and a difference ends the test binary (a panic
would be caught by the engine's guard and turned into a script error).
210 calculate scripts (one per row of 10 sections x 20 rows, plus a sum
per section), debug build, instrumented inside the engine: the script
event on open 495 ms -> 204 ms (of which live-form rebuilds 217 ms ->
0), on a change 300 ms -> 172 ms; through the tools, layout included,
open 1.27 s -> 0.97 s and a change 0.44 s -> 0.22 s. The rebuild cost
removed grew with form size times script count.
* CI: the GoToR tests' case lists are only grown on Unix, so Windows must not warn on their mut
* M12: say when a form's scripts were turned off
When an XFA script runs past its time limit it is abandoned and the
form's scripts are turned off for the document. The only trace was an
error line in the JavaScript console, so calculations and buttons just
stopped working.
- Engine: Document::xfa_scripts_off() reports the state (set on open and
on an edit), so a viewer shows it without reading error text. doc_info
reports it to agents as xfa_scripts_off.
- App: when it happens (at open or after a click) a toast says so once,
and the notice bar says so from then on, ahead of its other notices,
with a JavaScript Console button. A notice bar the user had closed
comes back for it; closed again, it stays closed.
- The sentence is translated in the 17 catalogs that are complete
(hashes in ATTRIBUTION.toml updated).
Tests: two kittest UI tests (runaway at open; runaway click after the
bar was closed), which fail without the app change; engine assertions
for both states; a doc_info tool test.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Catalogs: the scripts-off notice in Greek, Polish and Telugu; refresh hashes
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* feat(edit): remove all links command and context menu (#539)
- Expose 'edit.remove_links' and 'edit.remove_all_links' commands to remove all links across the document or on specified pages.
- Add right-click context menu options for links: Properties, Delete, and Remove all links in both Link tool and Select tool modes.
- Extend automation tool 'links_remove' with optional 'pages' parameter and removal count.
- Add notification feedback in UI for link deletion.
- Mark 'edit.remove-all-links' as shipped in Parity with evidence tests.
- Add unit and integration tests covering automation, engine, and UI undo/redo.
* Remove all links: one command id, catalog rows, link menu only on a link
- Drop the duplicate edit.remove_all_links command (same label as the
existing edit.remove_links, so it showed twice); edit.remove_links now
runs remove_all_links with its toast.
- Add the toast strings (No links to remove, Removed 1 link, Removed {n}
links) to all 20 catalogs.
- The canvas context menu shows the link items only when the right-click
hit a link (LinkView::context, set per right-click), so a link left
selected no longer takes over the comments menu, and the Link tool no
longer replaces the comments menu away from links. Regression test.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Restore the PR's links_remove pages test (lost with the workdir conflict)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* test: give faux-redaction audit its own workdir (parallel-test flake)
* hayro: ColorReplacement type and luminance mapping (reading colours, #897)
* fmt: engine dates (upstream Greek localization miss)
* hayro: apply ColorReplacement to solid text and line-art paints (#897)
* render: ReadingColors view setting flows into RenderSettings (#897)
* engine: per-document reading colours state (#897)
* automation: view_reading_colors tool; page_render honours it (#897)
* ui: Reading colours preference (Replace Document Colors, #897)
* ui: seed reading colours on revision and signed-version opens (#897)
* parity: a11y.replace-page-colors shipped (#897)
* render: map stencil-mask paints through reading colours (#897)
An ImageMask stencil's solid paint was baked into the raster bytes raw,
bypassing the reading-colours hook every other solid fill goes through:
under white-on-black, CCITT scans, JBIG2 text and stencil logos drew
black ink on the black mapped background and vanished. Route it through
replaced(paint, false) — stencils are line art in disguise — and cover
it with an ImageMask fixture test sampling mapped ink on a mapped
background.
* render: print previews render with reading colours off (#897)
Print previews went through the document's render pool, whose config now
carries the reading colours: a white-on-black user saw black sheets in
the Print dialog while the actual print stayed uncoloured. The request
tag is the per-request channel that already crosses the render boundary,
so PRINT_TAG now lives in pdfcraft_render and the renderer honours it by
rendering previews with reading colours off — a preview's job is
fidelity to the printout. The main view stays recoloured. Covered on
both render paths (inline PageRenderer and pool worker).
* ui: seed reading colours on created-document opens (#897)
open_created (comment summaries) and open_created_bytes (images, text,
blank pages, clipboard) pushed new DocViews without seeding the reading
colours, unlike every other open path. A created document now starts
with the app-wide preference too; the seed-on-open test drives both
paths.
* docs: reading-colours flag echo and display-fidelity parity notes (#897)
The view_reading_colors description now says a flag that differs from
the mode's preset default makes the echoed mode read custom, and the
a11y.replace-page-colors parity notes record that print previews and
view snapshots render with the document's true colours: reading colours
apply to the reading view only.
* Merge follow-ups: reading colours beside preview renders and the new catalogs
- Renderer::new carries both color_replacement and the new preview flag
- our raster tests construct RenderRequest with preview: false
- the preference dialog grew past the window: scroll the combo into view
and give the fixture a valid xref so no repair banner covers the dialog
- checkboxes use the crate's square-box widget (clippy disallows egui's)
- Kazakh and Turkish catalogs gain the ten reading-colours strings
* Reading colours: record the hayro patch in vendor/README.md; add missing translations
vendor/README.md gains hayro patch (13): `RenderSettings::color_replacement` /
`ColorReplacement`, the `render_pdf` signature change and the removed
`[dev-dependencies.log]`, with its tests. Adds the ten reading-colours labels
to el, es, pl, te and zh-hant.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* M7: open local GoToR PDF links natively
* GoToR links: read only regular .pdf files under a size cap; add missing translations
A GoToR link in an untrusted PDF could name /dev/zero (unbounded read), a FIFO
(UI thread hangs) or a directory. Both the UI path and the `link_open` tool now
go through `pdfcraft_engine::read_remote_document`, which requires a `.pdf`
extension and a regular file (metadata checked before opening) of at most
1 GiB, and stops reading if the file grows past the cap. Regression tests cover
directories, a /dev/zero symlink and a FIFO (unix) in the engine, the tool and
the UI.
Adds the four link notifications to all 20 catalogs and "The existing action
will be preserved." to el, es, pl, te and zh-hant.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Gates: fix two clippy failures on main
- ocr_ui: "Also recognize pages that already have text" used egui's own
checkbox, which clippy.toml disallows (#1184 landed beside #1173);
use widgets::checkbox like every other box.
- camera_edges: Rust 1.97's manual_range_contains; the rewrite keeps the
old answer for a NaN angle (false) with an is_finite check.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019ojKsSCHWk2AuyDTFMHCd7
* M10: print from the web build through the browser's print dialog (gap 4)
The web build had no printer: spool::submit refuses on wasm, so Print
could only download the print-ready PDF. Now its Print dialog offers
"Browser's print dialog" (the default there), which reaches every
printer the operating system knows.
- web_print: PdfCraft draws the print-ready PDF's sheets itself
(engine Exporter), one sheet a frame since wasm has no threads:
300 dpi up to 100 sheets, 200 up to 300, 150 up to 1,000, at most
64 MP a sheet and 1 GiB of PNGs a job. The PNGs become blob URLs
and print from a hidden srcdoc iframe, one sheet per page, margin 0.
- Chromium prints every page at the default @page size, so a sheet of
the paper's size turned sideways is rotated 90 degrees CCW onto it
(as drivers do); other sizes get named @page rules.
- Copies, two-sided and colour are greyed out (the browser's dialog
sets them). If print() is refused (e.g. a sandboxed frame), the
print-ready PDF downloads instead, with the reason.
- pdfcraft-print stays free of web APIs; six new strings in all 20
catalogs (ATTRIBUTION hashes refreshed); docs and parity updated,
gap 4 closed.
Verified in headless Chromium against a trunk build: three sheets at
300 dpi, the landscape sheet turned, no blank trailing page, and the
download fallback. Firefox and Safari not yet tried.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019ojKsSCHWk2AuyDTFMHCd7
---------
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Expose tag parent and depth for hierarchy view
* Accessibility: add visual tag properties panel
* Show collapsible tag hierarchy in accessibility panel
* Open checker findings in the matching structure tag
* Translate Tags panel across supported languages
* Tags panel: walk the structure tree once per edit, not every frame
The Tags panel and checker findings that open a tag share a tag list cached per
document and edit generation.
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Save accessibility review decisions against PDF revision
* Accessibility review sidecars: read them with a 1 MiB cap
The sidecar path is the caller's and may name any file, so reading it
whole was an unbounded allocation. Stop past 1 MiB and refuse an
oversized file as not a sidecar (load fails, save leaves it alone), like
malformed content. Tests cover malformed, binary and oversized files.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
