* fix(ui): validated signature display, snapshot tab reuse
Signature widgets with layered appearances baked the unverified state
into the page, so a valid signature kept reading 'Signature Not Verified'
while the banner and panel said valid. Validated verdicts are now drawn
into the icon and caption layers in the display copy only: the signed
bytes are untouched, saving keeps the original appearance, and files
without those layers or without a valid verdict render exactly as before.
Other valid signatures still get the verdict mark over their widget,
sharing one style with the Signatures panel, and hide it again once the
appearance itself shows the verdict.
View signed version and View revision opened a new tab on every click,
and every tab showed the document title, so repeats piled up identical
tabs. Repeats now reuse the snapshot tab, snapshot tabs read like their
source plus the suffix in the tab strip, window title and Combine picker,
and carry a notice bar naming the revision with a Close that asks about
saving first.
Signed-off-by: Chiranjeevi U <244287281+chiranjeevi-max@users.noreply.github.com>
* Address review comments on validated appearances and trust refresh
Count every field when checking shared appearance streams, so a
caption shared with an unvalidated field is never rewritten for the
valid one alone.
Pick the icon slot by drawing instead of length, and only when a
single layer qualifies. Bare rectangles never count as the icon, and
ambiguous or missing slots fall back to the overlay badge.
Revalidate and invalidate together through one helper, so trusting a
certificate always drops rendered pages. Trust alone still marks
nothing dirty.
Tests: mixed-verdict sharing, longer decorative borders, competing
and doubled layers, capture-before preservation, trust invalidation
without zooming, and signed Session round trips with rendering,
saving and passwords.
Signed-off-by: Chiranjeevi U <244287281+chiranjeevi-max@users.noreply.github.com>
* Prove the icon slot geometrically and cover real layered signatures
A lone line drawing is still not the icon: frames and borders span the
box while the status mark lives in a corner of it. The icon now has to
sit strictly inside the appearance frame and cover at most half of it;
anything else falls back to the overlay badge. Widgets without a
measurable frame veto the rewrite the same way.
Tests: parsed extents and inhabitant checks as units, both reported
border repros plus a frameless widget, and real layered signatures
built with cms::sign_detached through Session open, trust, rendering,
save and reopen, plain and password-protected.
Signed-off-by: Chiranjeevi U <244287281+chiranjeevi-max@users.noreply.github.com>
* Identify the icon by shape instead of geometry
A lone line drawing is still not the icon, but size and position were
the wrong signals: the real status mark is large, and geometry blocked
it. Frames, borders and panels are rectangles by nature while the mark
is not, so a drawing made only of axis-aligned rectangles is decoration
however it is stroked. Singularity, shared-stream and template checks
are unchanged; anything ambiguous still falls back to the overlay badge.
Tests: rectangularity as a unit, nested line-drawn frames, and a
triangular fixture mark in place of the rectangular one.
Signed-off-by: Chiranjeevi U <244287281+chiranjeevi-max@users.noreply.github.com>
* Budget the appearance walk and keep the marks with the bytes
The walk that finds a signature's icon and caption capped depth,
layers and fields, but not the work: a dictionary whose entries all
point at the next one is visited once per entry per level, so a small
hostile file never finishes opening. The walk now counts its visits
and gives up, and a field whose tree cannot be read to the end stops
the whole pass, because a layer we never read may be the one two
fields share and a rewritten shared layer puts one field's verdict on
another field's page. The sharing count is exact again with that: two
widgets of one field pointing at the same appearance claim it once,
or the field vetoes its own rewrite.
A mark used to outlive the bytes it described. A failed display write
left the page showing the file's own caption while the verdict still
claimed its state was drawn; a metadata edit dropped the mark while
the page kept drawing the state, so the badge landed on top of it. The
write fallback now drops the marks and logs the loss, and metadata
carries them over.
Tests: a self-referential appearance tree, which never finished before
the budget, two widgets sharing one appearance, a metadata edit that
keeps its mark, a save that goes through the writer instead of
short-circuiting on the opened file, and the snapshot bar's Close
button pressed for real.
Signed-off-by: Chiranjeevi U <244287281+chiranjeevi-max@users.noreply.github.com>
* Cite the new regressions in parity, restore main's installer note
The appearance entry now cites the bounded walk and the save through
the writer, and says what a tree that cannot be read to the end does.
The installer entry carried main's older text, which still claims
signed installers are planned; main's newer note is taken verbatim.
Signed-off-by: Chiranjeevi U <244287281+chiranjeevi-max@users.noreply.github.com>
* M9: preserve rounded decoration beside raster status glyphs
* M9: place appearance progress beside signature history
* M9: retain appearances with ambiguous curved layers
* M9: keep signature verdicts in viewer overlays
Defer generic appearance rewriting: caption text and a unique drawing do not establish an icon role. Preserve original artwork for saves, image and text exports, and both print modes while retaining snapshot reuse and trust refresh. Cover chamfered borders and mixed signer/caption streams through signed Session round trips.
---------
Signed-off-by: Chiranjeevi U <244287281+chiranjeevi-max@users.noreply.github.com>
Co-authored-by: skylar taylor-barrick <hi@skylar.cc>
* M1: edit finds the pages a damaged file's readers find (fixes#1656)
* M1: rebuild a lost page tree only when the reader shows the same pages, and refuse edits to signed rebuilt files (#1656)
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* M6: make list boxes directly selectable and scroll to selection (#1524)
- In-place selection: List boxes are rendered directly on the page and
selectable in place. Clicking an option row selects it immediately;
Ctrl/Cmd-clicking toggles items in multi-select lists, and Shift-clicking
selects ranges, without opening a popup menu.
- Appearance and scroll (/TI): When options are selected, /TI (top index)
is automatically adjusted so the selected items are scrolled into view
within the widget's visible rows, and option rows and selection highlights
are drawn into the appearance stream.
- Unit and UI tests: Added tests in pdfcraft-forms verifying /TI scrolling
and appearance generation for multi-select lists, and UI tests in
pdfcraft-ui-egui covering in-place click and Ctrl-click toggling.
Also ensured test harness in reload.rs explicitly sets language to en.
Fixes#1524
* List boxes: keep the engine's page appearance, consume arrow keys
Drop the overpaint of every fillable list box with an egui mock (it ignored the
PDF's fonts, colours and /MK /R; the engine redraws the appearance with the new
/TI), and consume ArrowUp/ArrowDown in the list overlay so they don't also
scroll the page.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* M7: grow text boxes and edit existing text
Text boxes now grow to the page edge and vertically as needed, retaining their size when saved. Clicking native or added text in either text tool edits the existing item instead of layering a duplicate over it.\n\nCo-authored-by: OpenAI gpt-6.1-sol <noreply@openai.com>
* #1539: build against main's Document::added() accessor and draft-aware prepare
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Print: 4 x 6 in label paper and a Label layout for shipping labels
Thermal label printers (e.g. VEVOR Y486) could not be used for eBay/carrier
labels: the paper list had no 4 x 6 in size, the chosen paper was never sent
to CUPS (the queue's default was used), and labels laid out sideways on a
Letter/A4 sheet printed small or rotated.
- PAPERS gains "4 x 6 in label (101.6 x 152.4 mm)"; cups_media() sends the
chosen sheet to the spooler as `-o media=` (Letter, Legal, Tabloid, A3-A5
and w288h432 for the label), so the driver feeds the size the PDF was
laid out on.
- New Layout::Label: each page is cut to its printed area (a low-resolution
render, as Fit Visible does), turned a quarter turn when it is sideways in
the direction that makes its text upright (text_reads_up reads the text
and form matrices), and fitted uniformly with a small margin. Vector
content is kept, so barcodes stay sharp and undistorted. "Turn upside
down" flips it 180 degrees. One label per sheet.
- Choosing the label paper selects the Label layout, and vice versa.
- Strings translated in every bundled catalog.
Tests: label geometry (crop, quarter turns, no stretching, margins),
cups_media, text direction; print, ui-egui and automation unit tests pass.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GFXSksdMaJ3YnheY7Q6sTx
* Refresh catalog hashes after merging main
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Alessio Boschi <alessio.boschi@dinova.one>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* M12: find untagged accessibility content
* i18n: translate untagged content checker (rebased)
* fix(i18n): refresh untagged content translation hashes
* fix(tests): restore full test modules for find-untagged content
* fix(i18n): preserve existing translations after rebase
* ci: rerun shared timeout test
* chore(deps): refresh rust for the advisory gate
Use the current lockfile, including the rustls security update, so the dependency check can run on this branch.
* Refresh catalog hashes after merging main
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* M12: tag unstructured AcroForm widgets
* i18n: translate form tag command
* i18n: repair form-field label merges
* fix(i18n): refresh translation catalog hashes
* fix(i18n): preserve main translations after rebase
* Merge main; tag a widget listed on several pages once, docs say existing trees are extended
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Merge main; add the Vietnamese catalog entry for Tag form fields
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Defer secondary PDF indexes until first use
* Merge main into #1434; read Document::added through the new method in content_ui
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Keep selected form values and page content through later edits (#1319, #1305, #1324, #1306)
An XFA radio item whose text contains a space was written back as an appearance-state name, so the next layout selected nothing. Replace Pages filled the gap between a split selection. Marking a figure decorative replaced every content stream on the page. Control clicks and drags accepted coordinates that overflow to infinity.
* Move the decorative-figure regression out of pdfcraft-edit
edit and a11y are both layer 4, so a dev-dependency from edit to a11y fails the layer check. The same regression now runs in the engine, which already depends on both.
* Drop pdfcraft-a11y from the edit crate's lockfile entry
* Run a tool after a background open of the file it asked for
A tool chosen with no document opened the picked file on the worker, but only ran when that open finished inside the picker callback. Remember the command on the pending open, and let the command test wait for the worker.
* Wait for background opens in the command tests
Opening a picked file or a recent file finishes on the worker, so a fixed handful of frames can assert before the tab exists.
* Compare batch copies to the PDF that was written
A new text PDF stamps the current second, so a later pdf() call is a different file. The numbered copy and the source must match the bytes that were saved.
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* M3: add selected-text Copy to page and Edit menus (#1225)
Register selected page-text Copy with the existing document permission gate and expose it in Edit and the ordinary page context menu. Route floating Copy through the same gate while preserving focused-input and Organize clipboard ownership.
Four regressions fail behaviorally on the exact base; five candidate regressions pass. All eight cargo xtask ci stages pass: 2575 tests passed, 12 ignored, and 31 WASM crate checks. Native synthetic checks verify Unicode clipboard output, disabled no-selection/restricted actions, and permissions-password unlock using presented Xvfb/Vulkan software-rendered frames. Physical display and hardware GPU coverage are not claimed; the optional cargo-deny audit was unavailable.
Generated with Codex for FredApps.
* Tests: scope GoToR case mutation to Unix for Windows Clippy
Keep the common directory/non-PDF cases immutable. Shadow them in the Unix-only block so FIFO coverage can append its case without an unused-mut warning on Windows. No assertion or platform coverage is removed.
This repairs the exact hosted Windows Clippy failure inherited from upstream. Source review and whitespace checks passed; no local build, test or formatter was run during the pause. Automatically triggered hosted CI will validate this head separately.
Generated with Codex for FredApps.
* Tests: scope document link target mutation to Unix for Windows Clippy
Preserve directory coverage on all native platforms and device coverage on Unix. Static diff, whitespace and conflict checks passed; no local build, test or formatter was run during the pause.
Generated with Codex for FredApps.
* Tests: escape GoToR fixture file paths as PDF literal strings
Windows absolute paths were interpreted as PDF escape sequences, introducing control characters and failing the hosted local GoToR root test. Escape backslashes and parentheses in the fixture helper without changing product behavior or assertions. Static diff and whitespace checks passed; hosted CI will validate the repair. No local builds, tests or formatters ran.
Generated with Codex for FredApps.
* Tests: use ordinary absolute paths in the GoToR fixture
Build the absolute target from the original sandbox base rather than its canonicalized Windows verbatim path. Assert absolute-path form and canonical identity with the sandbox target. Preserve production UNC/device/verbatim rejection and existing containment and destination assertions. Static diff and whitespace checks passed; no local build, test or formatter ran.
Generated with Codex for FredApps.
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
bookmark_list and link_list add a destination: its type (XYZ, Fit, FitH,
FitV, FitR) and its position in the same top-left points as every rect.
A link through a named destination now gives its page (to_page, named)
instead of only the name.
Co-authored-by: Brandon Thomas <echelon@gmail.com>
On wasm32-unknown-unknown the engine has neither a clock (`now()` is empty) nor a time zone
(`local_utc_offset()` is 0), so in a browser Fill & Sign stamps 1 Jan 1970 and `/ModDate` is never
written. The one way to inject a clock, `with_clock`, is a test shortcut: it takes the injected
instant AS local time and zeroes the zone, so a host that injects only that gets either the local
dates or the UTC ones wrong by its offset (21:30 in São Paulo, UTC-3, is already the next day
in UTC).
`Session::with_wall_clock(clock, utc_offset)` keeps the two separate: `clock` is the UTC instant
(what the file records) and `utc_offset` is asked on every use, because the zone changes with
daylight saving. `Automation::with_wall_clock` forwards it. Nothing changes for a native build, or
for `with_clock`.
The test pins the contrast: at 21:30 in São Paulo the stamped day is the 14th, `signing_date`
carries `-03'00'`, the file's instant stays 00:30Z on the 15th, and the plain test clock still
answers the 15th.
Co-authored-by: Paulo Junior <195025778+bonfim6P@users.noreply.github.com>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
New files from Combine, Extract, Split and Create, signed, timestamped and
LTV-embedded files and the OCR batch output reopen with their pages before
anyone writes them, as saves already did. The desktop app, the automation
tools (with or without --root) and the CLI's edit, combine, extract and
split write through pdfcraft_platform::staging::write_atomically, so a
failed write or --out naming the input never leaves a half-written file.
Special files such as /dev/stdout are still written as given.
Claude-Session: https://claude.ai/code/session_01RUNQSPVXx3dDBabRZHAnjz
Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* M6: sort multi-select choice indices
Write ascending /I option indices without reordering /V selections.
Add forms and engine regressions for reverse selection and save/reopen.
Co-authored-by: Codex <codex@openai.com>
* M0: update rustls to 0.23.46
Update only the resolved rustls version and registry checksum.
Keep the existing choice-index feature changes and advisory policy.
Co-authored-by: Codex <codex@openai.com>
---------
Co-authored-by: sanyamsingh001 <314051937+sanyamsingh001@users.noreply.github.com>
Co-authored-by: Codex <codex@openai.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* M4: set page transitions and display times (/Trans, /Dur) through the engine and the tools
organize::set_transition writes or removes a page's /Trans dictionary
(only the entries the style reads and that differ from the defaults) and
/Dur, with every value checked before any page changes; Edit::SetTransition
is one undo step ("Set page transitions", translated in every catalogue);
page_transition_set is the tool. The counterpart of reading them (#2074);
playing them and the Organize dialog stay planned.
Refs #379.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RUNQSPVXx3dDBabRZHAnjz
* Refresh catalog hashes after merging main
---------
Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Edit: crop an existing page image with its handles
ImageChange::Crop(rect) keeps the part of a page image inside rect (user space)
with a clipping path placed just inside the scope that holds the image (or a
new q … Q around its Do); a clipping path already at the scope's start, the
picture's earlier crop, is replaced, so a crop can grow back. The pixels are
never scaled, and a later move or resize wraps the scope, so the crop moves
with the picture. ImageEdit::Crop (undo label "Crop image"), image_edit
action crop. In the window, right-click ▸ Crop Image puts the selected
picture in crop mode: eight handles trim (the inside pans), the part that goes
is dimmed, Enter or Done applies, Esc or Cancel leaves; Remove Crop shows the
whole picture again. Rows in every language, their checksums in
ATTRIBUTION.toml, parity edit.image-crop shipped.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Image crop: Bulgarian hint without a character the monospace UI font lacks
JetBrains Mono has no 'ѝ', so primary_ui_fonts_cover_latin_and_cyrillic_catalogs
failed; the hint is reworded ("with its handles" -> "with the handles").
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Refresh catalog hashes after merging main
---------
Co-authored-by: Osvaldo Duran <338149330+regendorf-ux@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Comments: font size for text boxes in Comment Properties (#1908)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Refresh catalog hashes after merging main
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
A VML rectangle with an image did not show the picture in Word. Pictures on
positioned pages are now wp:anchor drawings behind the text, sharing the
picture XML with inline pictures. At most 1000 pictures / 512 MiB are embedded;
empty images are skipped.
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Print: print as image (Advanced), with grayscale pictures
print::Settings.raster (dpi 72-600, grayscale): Session::print_pdf renders each
distinct page used once the way the viewer shows it (comments left out when the
print leaves them out), composes it over white, grey by Rec. 601 luma when
grayscale is on, makes an image-only document of the pictures and imposes it on
the paper like the pages themselves. The Print dialog's new Advanced section
(folded unless on) offers it at 150, 300 or 600 dpi; doc_print takes as_image
and dpi. Rows in every language; parity print.print-as-image shipped,
print.grayscale shipped (the pictures are grey, not only the printer asked).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* ATTRIBUTION.toml: the language files' checksums after the new rows
cargo xtask assets checks each catalog's sha256; the rows this branch adds
changed the files without updating it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Refresh catalog hashes after merging main
---------
Co-authored-by: Osvaldo Duran <338149330+regendorf-ux@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Auto-size fields (`0 Tf`, often inherited from the AcroForm /DA) fit their
value to the box in the page appearance, but the in-place editor and the
preview shown before the page re-renders ignored it: they used a fixed guess
from the box height, never shrank to the width and never wrapped multiline
text, so long values ran past the box and were clipped.
The fit now lives in one place, `appearance::auto_text_size_by` (re-exported
as `field_auto_text_size_by`). The page appearance measures with Helvetica;
the screen measures with the interface font it draws in, which is wider and
breaks lines differently, so the text stays inside the box on screen too. The
editor wraps at the same scaled width the size was fitted to. Explicit sizes
are unchanged and still clip, as in Acrobat.
Tests: forms auto_text_size_fits_single_and_multiline_text (incl. NaN/inf/
negative boxes and a NaN measurer); ui-egui
auto_size_fields_shrink_and_wrap_typed_text_to_fit_their_box (fails with the
old on-screen sizing restored).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* M9: signature labels follow the interface language, and one the font can't draw is refused, never written as ?
The labels of a visible signature ("Digitally signed by", "Reason: ", ...) were written in WinAnsi unchecked, and every caller passed the English defaults. Now:
- sign: a drawn label is checked as the details are, and one Helvetica can't draw is refused (SignError::Unsupported) naming the label and the character. AppearanceLabels::fields and ::first_undrawable say which labels a caller can use.
- ui-egui: signing stamps the labels in the interface language when Helvetica can draw all of them, otherwise all in English (never a mix) with a note under the preview. The preview uses the same labels, the stamp's line layout and the signing time.
- automation: sign_document takes optional labels and appearance; a label the font can't draw, an unknown key or one without a visible signature is InvalidArgs.
- Catalogs: the five labels and the note in every language; refresh hashes.
Follows up the note on #1112.
* Refresh catalog hashes after merging main
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Flattening the fields of a laid-out XFA form used to leave the XFA in
the file: Adobe's viewers then laid the form out again from the
template over the baked pages, so the "flattened" PDF was still a live
form there and a plain one everywhere else.
pdfcraft_xfa::strip takes the XFA out of a document: the packets
(template, data and all), /NeedsRendering on the catalog and the
AcroForm, the layout mark, the overrides, and the private keys on
every field down the tree. The engine calls it after Flatten form
fields on a document with XFA packets, so the result is a plain PDF
every viewer shows the same, and for the new Edit::XfaToStatic
("Convert to a static form"; tool xfa_to_static), which keeps the
laid-out pages and the fields with their values as an ordinary
AcroForm that no viewer lays out again and whose scripts no longer
run. Both undoable: the engine's post-edit refresh re-reads the
layout mark to drop or restore its XFA state and the cached template.
What the packets held beyond the fields is reported (packets by
name, data no field showed, buttons left inert, the layout's own
warnings, Reader usage rights) as document warnings, and a dynamic
form that was never laid out is refused rather than left with
nothing. Applying redactions shares the same strip. Closes the last
planned XFA parity entry (form.xfa-flatten shipped).
Inserting an annex into a guide dropped the annex's bookmarks: the pages
came in without them, while Combine Files keeps every file's bookmarks
under one named after the file.
Insert pages from file now does the same: the inserted file's bookmarks,
destinations mapped to the copied pages (positions kept, named ones
resolved), go under one new bookmark titled with the file's name at its
first inserted page, collapsed. That bookmark is placed among the
document's top-level bookmarks before the first one pointing after the
inserted pages. A file without bookmarks adds none.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: OpenAI Codex <noreply@openai.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
The Update and Remove commands existed and were enabled only when the
document had that kind of mark, but no menu listed them. A tool entry in
the catalogue can now list further commands (ToolItem::actions); the tool
panel shows a caret and opens a menu, each command enabled by its own
needs. Add stays usable with no document open (it asks for a file first).
Tests: the catalogue's menus name registered commands starting with the
entry's own, and every edit.*.update / edit.*.remove is reachable from a
tool entry.
* M11: merge image fragments, and the Standard and Mobile optimizer presets
Some PDF printers draw a page picture as thousands of images one pixel row
high (one real page: 3,300 strips, 4.3 MB). The optimizer works image by
image, a one-row image can't be resampled, and every JPEG strip carries its
own headers, so Reduce File Size saved 2 bytes on it.
- pdfcraft-optimize `fragments` (Settings::merge_fragments, on by default):
runs of `q … cm /Im Do Q` drawing upright 8-bit grey or RGB images in one
colour space, sharing their left and right edges and stacked edge to edge
(at least four, nothing else drawn between them; or, failing that, the
rows drawn one under the other up to a gap) become one lossless image at
their finest resolution. The image settings then resample it, and Clean
Up drops the strips. A page whose content can't be read back exactly is
left alone.
- Presets as in Acrobat's Settings menu: Standard (Reduce File Size's
choices) and Mobile (images above 144 ppi to 96 ppi, JPEG high). The PDF
Optimizer dialog has a Settings menu (Custom once an option changes) and
a Merge image fragments box; doc_optimize takes preset and
merge_fragments and reports merged_images and fragments_merged.
- A progress stage for the merge; four new strings in all 21 catalogs.
On the real page: Standard/Reduce 4.3 MB → 231 KB, Mobile → 161 KB, with
a rendering closer to the original than Acrobat's Mobile result (147 KB).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Refresh catalog hashes after merging main
---------
Co-authored-by: magdale76 <16279778+magdale76@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* M2: Add word and character counts with optional content exclusions
Retain the complete reviewed change, including prior integration resolutions,
on current upstream.
M2: Add document word counts and semantic exclusions
* Refresh catalog hashes after merging main
---------
Co-authored-by: LabDennis <341377186+LabDennis@users.noreply.github.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Field detection read only vector data: text-layer words and drawn
rectangles and lines. A scanned form is a single picture, so it found
nothing there.
A page that an image covers at least half of, and whose content draws
no lines, is now rendered at 144 dpi and its shapes are read from the
pixels (pdfcraft_forms::detect::raster): ink against a local mean,
long thin runs as lines, enclosed rectangular patches of paper as
boxes, the empty band of a box with a small printed label as its
writing area, and the open-ended horizontal lines as rules. Labels come
from the text layer, else from OCR when the models are installed;
without either the fields get default names. Detection works in the
displayed frame, so a scan stored sideways reads like any other, and
fields on a turned page get /MK /R so typing reads upright.
generated with Claude Code
* G14: Vietnamese catalog — menus, file and shell chrome
Add the Vietnamese (vi) TSV catalog header and translations for menus,
File/Edit/Help chrome, clipboard and common shell labels. PhotoCraft and
VectorCraft catalogs used only as translation memory when English source
and context matched. ATTRIBUTION records the asset hash.
Co-authored-by: Cursor <cursoragent@cursor.com>
* G14: Vietnamese catalog — forms, signatures and pages
Translate form/Fill & Sign/certificate wording and page organize/rotate/
extract/split labels. Keep product and format names unchanged.
Co-authored-by: Cursor <cursoragent@cursor.com>
* G14: Vietnamese catalog — comments, view, a11y and contexts
Translate comments/markup, view/zoom/preferences tools, accessibility and
preflight sentences, plus contextual rows (certificate, calendar, keys,
scroll speed, signature pad, action wizard, @plural one-form).
Co-authored-by: Cursor <cursoragent@cursor.com>
* G14: Vietnamese catalog — remaining dialogs and notices
Complete the Vietnamese catalog to every (context, English) key in the
bundled union (2,580 entries). No unapproved English UI fallbacks remain
outside the documented VI_KEEP_AS_IS list.
Co-authored-by: Cursor <cursoragent@cursor.com>
* G14: restore complete Vietnamese catalog key order
Replace the domain-appended catalog with the verified 2,580-entry union
in stable key order so coverage matches every bundled reference key.
Co-authored-by: Cursor <cursoragent@cursor.com>
* G14: register Vietnamese interface and date language
Add `vi` / Tiếng Việt to LANGUAGES and DATE_LANGUAGES with plural_none
and rtl false. Locale tags vi, vi-VN and vi_VN.UTF-8 resolve. Calendar
uses Tháng Một / tháng Một; Fill & Sign refuses non-WinAnsi month names.
Coverage tests require full command, literal, key and credits coverage.
Co-authored-by: Cursor <cursoragent@cursor.com>
* G14: document Vietnamese localization
Record Vietnamese at 100% catalog coverage in localization-parity and
ROADMAP, list Tiếng Việt in Preferences/docs, and note the G14 catalog
in the progress log. Engine/OS details, document contents, filenames,
CLI/MCP and external help remain out of scope by design.
Co-authored-by: Cursor <cursoragent@cursor.com>
* G14: use ASCII > in Vietnamese preference paths
Inter lacks U+25B8 (▸). Match other Latin catalogs and write preference
paths as "Tùy chọn > …" so the glyph coverage test stays green.
Co-authored-by: Cursor <cursoragent@cursor.com>
* G14: finalize Vietnamese terminology and current coverage
Disambiguate theme Appearance (Giao diện) from object look (Diện mạo),
normalize form Field to Trường, make redaction apply wording permanent,
use numeric calendar months, close the GoToR/digital-ID key gap, and
pin regression assertions. Refresh the vi.tsv attribution hash.
Co-authored-by: Cursor <cursoragent@cursor.com>
* G14: align localization docs with Vietnamese coverage
Recompute the twelve-language mean (≈59% → ≈68%), document 23 interface
languages, and remove stale claims that Vietnamese is missing.
Co-authored-by: Cursor <cursoragent@cursor.com>
* G14: cover Wayland title-bar strings in Vietnamese
Translate Minimize/Maximize/Restore and the system title-bar preference
added on upstream main, and refresh the catalog attribution hash and counts.
Co-authored-by: Cursor <cursoragent@cursor.com>
* G14: correct current union key count in localization docs
Co-authored-by: Cursor <cursoragent@cursor.com>
* G14: prepare Vietnamese localization for review
Trim the vi.tsv header to maintainer-oriented notes, record native-speaker
community review in attribution and localization docs, and refresh the
weighted readiness arithmetic (localization ≈68% → ≈50%).
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: DUY Tran Nhat (SAE-KIDS) <duytn@sanancorp.com>
Co-authored-by: Cursor <cursoragent@cursor.com>
* M5: Fill & Sign text reads across on rotated pages
Typed text, dates and text boxes ignored the page's /Rotate, so on a
page stored sideways (common for scanned forms) the text came out
sideways. The box now follows the displayed axes, the annotation
records the turn in /PCTextRotate and its appearance is turned back
with a form /Matrix, as stamps and image signatures already do.
Callouts keep user-space axes. The headless fill_sign_add tool gets
the same layout.
generated with Claude Code
* chore: credit alexanderalber in the About window
generated with Claude Code
* M4: keep the last saved revision across undo (#1310, #1311, #1312)
Undo treated a return to the opened file as unsaved work, and after a save it followed the restored snapshot's older base. Revert and the next save now stay on the last saved file, so that revision remains in the PDF.
* Run a tool after a background open of the file it asked for
A tool chosen with no document opened the picked file on the worker, but only ran when that open finished inside the picker callback. Remember the command on the pending open, and let the command test wait for the worker.
* Wait for background opens in the command tests
Opening a picked file or a recent file finishes on the worker, so a fixed handful of frames can assert before the tab exists.
* Compare batch copies to the PDF that was written
A new text PDF stamps the current second, so a later pdf() call is a different file. The numbered copy and the source must match the bytes that were saved.
* Drop the unused batch fixture left by the merge
Main already keeps the written PDF in original, so the older source binding is unread and fails -D warnings.
Consolidate the reviewed change and its follow-ups on current upstream.
Original change notes:
M8: Bound and reuse repeated redaction overlays
Prepare appearances within a shared 8 MiB budget before changing the document. Reuse one measured and encoded row, reject excessive geometry, and preserve document and undo state on refusal.
Fixes#1326
M8: Preserve upstream font metrics in bounded redaction overlays
M8: reuse ordered redaction mark groups (#1326)
Co-authored-by: LabDennis <341377186+LabDennis@users.noreply.github.com>
The print-ready PDF that `pdfcraft_print::impose` builds starts from a new
catalog with only /Type and /Pages, so the document's /OCProperties was not
carried over. The pages' marked content still refers to its optional-content
groups, but nothing said a group was off, so a layer that is switched off in
the document (and not drawn on screen) was printed anyway.
Keep /OCProperties in the new catalog, so the sheets hide the same layers the
document hides. Test: a one-page document whose red square is in a layer; with
the layer off by default it is not drawn on screen and, now, not on the
printed sheet; with the layer on it is drawn in both.
Printing still follows the layers' default state only; applying the Print
event of /AS (a layer shown only on screen or only in print) is not done here.
Validate serialized PDF bytes and page count before replacing the destination in desktop and automation saves. Reject unreadable or page-losing output before file replacement and saved-state updates.
Keep staging writes synced before publication and retain the regression for a repaired page tree that cannot survive a full rewrite.
Fixes#1698
Reorder document tabs by dragging while keeping the active document and its view state. Add Ctrl+Tab and Ctrl+Shift+Tab cycling in visible order, including Combine files, and translate the menu labels.
Keep timestamped batch test expectations tied to the originally generated PDF bytes.
Closes#1537Closes#1542
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A stamp placed on a page with /Rotate was drawn in user space, so the
label or picture turned with the page. Counterrotate the appearance so
it reads upright as the page is displayed.
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* M8: redaction unlinks removed images and forms from inherited and shared resources
Apply Redactions and Remove Hidden Information give a rewritten page its own
pruned /Resources, but the dictionary the page drew through before could still
name the image or form that was removed:
- a /Resources inherited from a /Pages node;
- one resource dictionary object shared by several pages;
- the page's own dictionary, when a form without /Resources drew the image
through it.
A full-rewrite save keeps whatever is still referenced, so the removed image
samples and form text stayed in the saved file while the operation reported
success. Per-page resources (the case fixed in #1099) were not affected.
The interpreter now records the original object behind every XObject it drops
or replaces. After the page loop, each page-tree resource dictionary that still
names one loses that entry unless a page drawing through that dictionary still
draws the name (the same image on another page, or again outside a mark). A
dictionary that loses an entry is replaced by a private copy on its node, so a
dictionary object shared with other nodes is left alone for them. If a page's
use of a name cannot be told (unreadable content, a form that will not decode),
the operation fails closed.
Tests: redacted_xobjects_do_not_survive_through_inherited_or_shared_resources,
an_image_another_page_still_draws_through_the_same_resources_is_kept,
an_image_a_form_drew_through_the_pages_resources_does_not_survive,
a_hidden_layers_image_does_not_survive_through_inherited_resources.
Not covered here: originals named by a form XObject's own /Resources, by an
annotation appearance or by a pattern.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M9: a cross-reference entry the reader sets aside is never an unchanged signed object
The reader that judges post-signing changes and the renderer that draws the
page resolve some cross-reference entries differently. A revision appended
after signing could redefine a page's content stream and give the object an
entry the reader sets aside while the renderer follows it:
- an in-use entry at offset 0 (the reader skips it; the renderer fails to read
the object there, rebuilds its index and takes the last definition);
- a second entry for the same object in one section (the reader keeps the
first, the renderer the last).
The classifier compared the signed object with itself, found nothing changed
and reported the signature Valid while the page showed the new content.
pdfcraft-cos now records the entries it does not take at face value
(Document::xref_oddities: offset-0 in-use entries other than object 0,
duplicate entries that differ, reserved cross-reference stream types, and a
hybrid /XRefStm entry that disagrees with the table), and can say whether an
entry locates the object itself (Document::xref_entry_is_exact). What it
resolves is unchanged.
classify_changes treats any such entry added after the signed revision as a
change that is never permitted (page content when the object was a signed page
or its content, other changes otherwise). An object whose content compares
equal at a new place is unchanged only when its entry is exact: where the
reader had to search for the object, another reader may arrive elsewhere.
Tests: a_cross_reference_entry_the_reader_sets_aside_does_not_hide_new_page_content,
a_cross_reference_entry_that_misses_its_object_is_not_an_unchanged_object,
cross_reference_entries_that_are_set_aside_are_recorded,
an_entry_that_misses_its_object_is_found_by_searching_but_is_not_exact.
This closes the two demonstrated triggers and their near variants. It does not
prove that the two parsers agree on every file: other differences in what each
tolerates may remain.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M8: Apply Redactions is refused when the page still shows text under a mark
Redaction decides what lies under a mark from the positions its own
interpreter computes, and its verify pass reuses them. Where those differ from
the renderer's, a mark drawn over the text as displayed lies over glyphs the
interpreter places elsewhere, or does not see at all: they stayed in the file
and the operation reported success.
The case the test pins: a font and size set through an ExtGState /Font entry
(`gs`), which the renderer honours and the interpreter does not model. The same
kind of gap was observed for a font a form XObject takes from its caller, for
some predefined CMaps and for a rotated Type 3 font matrix. The standard-14
width error that first showed it is fixed at its root by d0d1ad81.
The engine now asks the renderer, which is what the user saw when placing the
marks. After redaction runs, the result is written as a save would write it
(without the marks' own overlay), its text is extracted, and a glyph still at
least half inside a mark fails the edit with the existing "could not be
verified" error. The edit runs on a copy, so the document is unchanged. A page
whose text cannot be read back fails the same way.
This makes such mismatches fail closed; it does not make those documents
redactable. Teaching the interpreter each of them is separate work.
Test: redaction_is_refused_when_the_page_still_shows_text_under_a_mark (the
line whose font is set by `gs` is refused and left unchanged; the same line set
with `Tf` is redacted).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Two follow-ups the maintainer asked for after #1355.
The script session's worker now says when the engine is ready for the
script it was sent (its JavaScript context built; FormCalc at once),
and the script's time limit runs from then, with the engine's own
start limit before it, as the one-shot path always did: building a
context is not charged to the script, which matters on a busy machine.
A field inside an area shares its data node with a field of the same
name outside it (areas are left out of data paths). The in-place
refresh of the live form now follows the data path through the tree
and gives every field bound to the node the value the tree builder
would, each by its own template field (an exclusion group there means
a rebuild), and the engine's value setter, with an index of widgets by
data node, gives every widget bound to the node the value by its own
kind, hidden fields included, writing the data whenever the node's
text differs. The script's time now also starts after its host and
globals are set up. A stale parity note (choosing a picture for an
image field, delivered in #1175) is removed.
A build compiled with PDFCRAFT_BUILD_LABEL=<label> shows "0.7.1 (<label>)"
in `pdfcraft --version`, `pdfcraft-cli --version`, Help > About and the
first log line (pdfcraft_engine::build_info). The version itself is
unchanged, so the update check, the MCP server info and the User-Agent
still carry the release version.
packaging/linux/package.sh puts the label in the file names
(pdfcraft-0.7.1-<label>-linux-x86_64.rpm) and makes the .rpm/.deb release
`1.<label>` (nfpm `release: ${RELEASE}`, 1 when unlabelled). rpm sorts
0.7.1-1.<label> after 0.7.1-1 and before 0.7.2-1, so a locally built
package upgrades over the installed release and the next release replaces
it. packaging/env.sh accepts only letters, digits and inner dots, which
are valid in both rpm and deb release fields.
Unlabelled builds are unchanged.
Made with Claude Code (Claude Opus 5.5, medium effort). It passes the
workspace quality gates (fmt, clippy, cargo test --workspace, xtask assets)
and was checked by hand on Fedora 44, but it has not been exhaustively
regression tested.
Co-authored-by: bmh129 <11478682+bmh129@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix(ui): dragged added text follows the pointer before release (fixes#1488)
* fix(ui): keep a moved item in place until the page is redrawn (fixes#1488)
