* M6: Prepare a form ▸ Text field table: rows and columns of text fields as one edit
Drag an area with the Text field table tool and set it up in a movable
window: rows, columns, row and column spacing, the first row number,
column widths (draggable dividers, arrow keys once focused) and a name
pattern per column, with the table previewed on the page. Add fields adds
every cell as one undoable edit ("Add text field table").
- forms: `table` lays the table out in view space and names its cells. It
refuses the whole table for a cell under MIN_FIELD_SIDE (now one
constant) or a name with a period, used twice or already taken, and
free_base picks the first free TableK for default names.
- engine: `field_table::edit` maps the cells onto the page, /Rotate and
/UserUnit included, and checks their size again there.
- automation: `form_add_field_table`, with an end-to-end test.
- ui-egui: the window belongs to one page of one document and closes when
that stops being the one prepared; Enter commits a number instead of
adding the table; dividers between many columns no longer panic in
f64::clamp. Strings in all 22 catalogs, and the Spanish engine-wording
tests cover the table's mistakes.
- parity: form.multiple-copies is partial; copying an existing field into
a grid is still missing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M6: text field table: refuse corners past the page's number range, run it by its command
Review follow-up on #3479.
- engine: a corner finite as an f64 but past f32's range came back from
the page's f32 mapping infinite. With one such corner a side was
infinite rather than NaN, so the cell passed and add_field refused it
only once the edit was applied ("the field is too small"). The edit now
refuses any corner that isn't finite on the page with the table's own
reason, before anything is added.
- automation: form.add.text_table runs form_add_field_table through
command_run, as comment.stamp runs stamp_custom.
- ui-egui: doc comments for the window's three remaining helpers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M6: text field table: close on document edits, lay out once per change, keep Escape for fields
Review follow-up on #3479 (benandez).
- The window belongs to the document as it was when it opened: it closes
when the edit generation moves (a page rotated, moved or deleted, an edit
undone), so a table set up for one page never lands on another or off it.
- The table is laid out and checked once per change, not several times a
frame: the window and the page preview share one `Laid` (cells and the
edit), and the preview draws only the cells in view, naming only those
with room for a name.
- Escape in a field of the window leaves the field and keeps the setup; a
second Escape closes the window.
- A table placed with a click is moved in from the page's edges, so all of
it is on the page.
- `free_base` takes one pass over the names; `{seq}` is documented as
counting from the first row number; `form_add_field_table` takes its
names from the batch instead of laying the table out again; the
unreachable `Dialog::FieldTable` arm says why it is there.
Each new test fails with its fix reverted.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
* M6: text field table: drawn with its panel closed, the window opens Prepare a form instead of closing
With the tool picked and the Prepare a form panel closed, the form is
still prepared and a table can be drawn. Drawing sends the tool back to
Select, though, so nothing was prepared on the next frame, and the table
window, which lasts only while the form is prepared, closed itself at
once: the table couldn't be set up. Opening the window now opens the
Prepare a form panel it belongs to. Closing the panel while the window
is open still closes the window.
Found by CodeRabbit, which saw the preview stop drawing; the window
closing first was the larger effect. prepare.rs
a_table_drawn_with_the_panel_closed_opens_it_again fails without the fix
("the window stays open": (None, false)).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
* Drop the second generation binding the main merge left in document_area
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: aiongg <aiongtaigi@gmail.com>
* M6: renaming a field renames it in the calculations that read it
A rename silently broke every formula that used the field: a sum dropped
it, notation read it as 0 and a script kept a stale value. set_props now
rewrites the name in each field's Calculate script, in the same edit:
AFSimple_Calculate field lists, simplified field notation (the BVCALC
comment and its translation) and getField calls naming it in one string
literal. The rest of each script is kept as written; names built at run
time, non-UTF-8 script streams and a name another field still has are
left alone, and a self-check keeps a script whose meaning would change.
Notation is read by one lexer shared by notation_js, eval_notation and
the rename. form_set_props returns formulas_updated; Field Properties
says how many calculations now use the new name.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
* M6: form_set_props leaves the renamed field out of formulas_updated by object
The renamed field was matched by the name given, but set_props stores it trimmed and under
its parent's prefix. When the same call changed the field's own formula, formulas_updated
listed the field as one the rename had rewritten.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
* M6: calculation order: read, check, fix and set the order fields calculate in
A form's calculations run in its calculation order (/CO), which a field
joins when it gets a calculation, so a chain defined in the wrong order
shows stale values. calculation_order reads the order against the fields,
with what each formula reads (field lists, notation names, literal getField
names) and what is wrong: a field reading one that calculates later, a loop
(strongly connected components, found without recursion), a field /CO
leaves out, and /CO entries that calculate nothing. Fix order is a stable
topological sort that moves only what must move and leaves loops alone.
set_calculation_order writes /CO afresh; a name two fields share (a
malformed form) stands for the next of them in the current order.
Edit::SetCalculationOrder sets it in one undo step and recalculates, and
form_calculation_order reads, sets, moves one field or fixes the order
headlessly. An edited formula now keeps its field's place in /CO, a field
/CO lists twice calculates once, and recalculation runs each field by
object, so two fields sharing a name both calculate. The /CO code of the
Calculate tab, field scripts and recalculation goes through one place.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
* M6: Prepare a form ▸ Calculation order: a page to reorder, check and fix the order fields calculate in
The calculated fields in the order they calculate (/CO), each with its
formula and the value it shows, moved with Up/Down arrows (as Acrobat's Set
Field Calculation Order), Alt+Up/Down or by dragging. A card says which
fields read one calculated later, which read each other in a loop and which
/CO leaves out, and holds Fix order; a loop's card opens one of its
formulas. On the page, arrows show what the field in focus reads and what
reads it, with each linked field's step. The order is a page of the Prepare
a form panel, opened from its Fields tools, with a back arrow to Prepare a
form; opening it ends Preview and closes the page grid.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
* M6: form.calculation_order runs form_calculation_order headlessly
The command had no tool linked, so command_list showed none for it and
command_run refused it. form_calculation_order is now its tool: run without
a change, it reads the order.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: aiongg <aiongtaigi@gmail.com>
Retain the calculation-order update and inline-image repair entry.
Position the repair entry away from concurrent top-of-log additions;
parser and render regression code remain unchanged.
* M6: renaming a field renames it in the calculations that read it
A rename silently broke every formula that used the field: a sum dropped
it, notation read it as 0 and a script kept a stale value. set_props now
rewrites the name in each field's Calculate script, in the same edit:
AFSimple_Calculate field lists, simplified field notation (the BVCALC
comment and its translation) and getField calls naming it in one string
literal. The rest of each script is kept as written; names built at run
time, non-UTF-8 script streams and a name another field still has are
left alone, and a self-check keeps a script whose meaning would change.
Notation is read by one lexer shared by notation_js, eval_notation and
the rename. form_set_props returns formulas_updated; Field Properties
says how many calculations now use the new name.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
* M6: form_set_props leaves the renamed field out of formulas_updated by object
The renamed field was matched by the name given, but set_props stores it trimmed and under
its parent's prefix. When the same call changed the field's own formula, formulas_updated
listed the field as one the rename had rewritten.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
* M6: calculation order: read, check, fix and set the order fields calculate in
A form's calculations run in its calculation order (/CO), which a field
joins when it gets a calculation, so a chain defined in the wrong order
shows stale values. calculation_order reads the order against the fields,
with what each formula reads (field lists, notation names, literal getField
names) and what is wrong: a field reading one that calculates later, a loop
(strongly connected components, found without recursion), a field /CO
leaves out, and /CO entries that calculate nothing. Fix order is a stable
topological sort that moves only what must move and leaves loops alone.
set_calculation_order writes /CO afresh; a name two fields share (a
malformed form) stands for the next of them in the current order.
Edit::SetCalculationOrder sets it in one undo step and recalculates, and
form_calculation_order reads, sets, moves one field or fixes the order
headlessly. An edited formula now keeps its field's place in /CO, a field
/CO lists twice calculates once, and recalculation runs each field by
object, so two fields sharing a name both calculate. The /CO code of the
Calculate tab, field scripts and recalculation goes through one place.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: aiongg <aiongtaigi@gmail.com>
Fall back only when missing sample or terminator bytes cannot fit the
content-window budget, including retained header and separator overhead.
Preserve available deterministic boundaries and ordinary large streams.
Add oversized, exact-budget, overflow and large-stream regressions.
* M6: renaming a field renames it in the calculations that read it
A rename silently broke every formula that used the field: a sum dropped
it, notation read it as 0 and a script kept a stale value. set_props now
rewrites the name in each field's Calculate script, in the same edit:
AFSimple_Calculate field lists, simplified field notation (the BVCALC
comment and its translation) and getField calls naming it in one string
literal. The rest of each script is kept as written; names built at run
time, non-UTF-8 script streams and a name another field still has are
left alone, and a self-check keeps a script whose meaning would change.
Notation is read by one lexer shared by notation_js, eval_notation and
the rename. form_set_props returns formulas_updated; Field Properties
says how many calculations now use the new name.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
* M6: form_set_props leaves the renamed field out of formulas_updated by object
The renamed field was matched by the name given, but set_props stores it trimmed and under
its parent's prefix. When the same call changed the field's own formula, formulas_updated
listed the field as one the rename had rewritten.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: aiongg <aiongtaigi@gmail.com>
encode_jpeg and encode_tiff composited the raster over white with
as_chunks::<4>(), which drops a partial trailing pixel, and handed the
result to encoders that trust its length. Run before this change:
- JPEG: a partial pixel at the end was dropped and the rest written as a
valid image; a buffer a pixel short, a pixel too many, empty, or with a
size whose byte count overflows panicked (image's JpegEncoder checks
the length with assert_eq!).
- TIFF: a partial pixel or a pixel too many was written as a valid
image; a buffer a pixel short panicked (tiff's write_data compares the
buffer with the pixel count, not the sample count, then slices).
The length check encode_png gained in #2425 is now check_raster, and all
three encoders call it first. Rendered pages are always the right size,
so what Export > Image writes is unchanged.
export::raster_tests::rasters_of_the_wrong_length_are_rejected now runs
its seven cases through PNG, JPEG and TIFF; it fails without the fix at
"JPEG, opaque, a partial pixel after". rasters_of_no_pixels_are_an_error
covers 0x0, 0x3 and 3x0, which are the right length and still errors.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
* fix(render): read each object stream's index once (vendored hayro-syntax patch 22)
`XRef::get_with` parsed an object stream's whole index of `objnum offset`
pairs again for every object it fetched from that stream, so reading all of a
stream of N objects took N² steps. Firefox keeps every object of a page in one
stream: the pdf.js corpus file bug1978317.pdf (65,542 objects in one stream)
took 37 s to draw and 40 s to extract its text, and was a known timeout in the
robustness baseline.
The parsed index is now kept per stream, beside the decoded stream data it
indexes (`ObjectStreamIndexes`), and never cleared, as that data isn't. A
malformed index is remembered as malformed; `/N` or `/First` that can't be
read (a reference that can't be followed while another stream loads) is not
remembered. An offset past `usize` is malformed instead of wrapping. A poisoned
lock is still used: entries are inserted whole.
Release build, Linux: bug1978317.pdf draws in 0.5 s (was 37 s) and extracts
its text in 1.9 s (was 40 s), and leaves the baseline's known timeouts;
40,000 pages in one stream open in 0.2 s (was 54 s).
`raster::tests::objects_in_one_large_object_stream_are_read_in_linear_time`
times out at 20 s with the fix reverted and passes in 0.2 s with it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MoEx9Nj8KC4WKDcf5YaokQ
* test(render): an object stream offset past usize is malformed, not a panic
Review follow-up on #2427. Mutation testing by mtlcl410 found that replacing
patch (22)'s `checked_add` in `read_object_stream_index` with a plain `+`
survived every test, although in a debug build that `+` panics on the very
input it guards against (and wraps in a release build). Their test pins it:
it fails with "attempt to add with overflow" under that mutant and passes on
this branch.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix(engine): PNG export writes opaque pages as RGB at deflate level 3
`encode_png` wrote every raster as RGBA at the png crate's default level
(zlib level 6). A rendered page is always opaque, so the alpha channel only
made the file bigger and slower to write. An opaque raster is now written as
RGB, at deflate level 3 with adaptive filtering; a raster with translucent
pixels is still written as RGBA with straight alpha.
The files come out the same size, 3-5x faster (release build, Linux):
300-dpi scan drawn at 220 dpi 805 -> 167 ms 4.46 -> 4.47 MB
text page at 220 dpi 70 -> 40 ms 0.85 -> 0.89 MB
annual-report page at 150 dpi 179 -> 64 ms 1.41 -> 1.38 MB
This is the encoder behind Export > Image (PNG), `pdfcraft-cli render` and
Print as Image; the automation tools (`page_render` and the other page
previews, MCP included) had a copy of it and now call it instead, so png is
only a dev-dependency of pdfcraft-automation. Two automation tests that read
`page_render` output as RGBA now accept the RGB a page renders as.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MoEx9Nj8KC4WKDcf5YaokQ
* fix(engine): PNG export rejects a raster of the wrong length
encode_png now checks that the buffer is exactly width × height × 4 bytes
(checked arithmetic) before choosing RGB or RGBA. The opaque path's
as_chunks::<4>() dropped a partial trailing pixel, so encode_png(1, 1,
&[10, 20, 30, 255, 0]) wrote a valid 1×1 PNG where the old RGBA encoder
returned an error.
Regression test export::png_tests::rasters_of_the_wrong_length_are_rejected
covers opaque and translucent buffers with a partial pixel, a pixel short,
a pixel too many, an empty buffer and a size whose byte count overflows; it
fails on the previous head at the reviewer's case.
Review: https://github.com/storytold/pdfcraft/pull/2425#discussion_r4281603405
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MoEx9Nj8KC4WKDcf5YaokQ
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The settings scroll when the window is short, but OK was the last thing inside
the scrolled content, so in a short window it was off screen until you scrolled
to it, and the dialog was cut off partway through the theme cards.
OK is now a row below the scroll area, outside it. The scroll area gets the
height the window leaves (at least 60 pt, so OK stays on screen in the smallest
window, 520 pt, at the largest interface size, 300%) and a scrollbar of its own
instead of the floating one that lay over the right edge of the theme cards.
A scroll area starts from the room its modal offers, and a modal offers more
each frame for the first few, so with OK outside the scroll the dialog opened
small and stretched by about 45 pt a frame for ten frames, and clicks in the
first frames missed. The scroll area is asked for its full height from the start
(min_scrolled_height, which egui applies only when the settings overflow it),
so it opens at full size and does not stretch in a tall window.
- test: OK and the title are on screen at window heights from 173 to 1100; OK
closes the dialog and does not move while the settings scroll, and a far-down
setting scrolls into view between the title and OK; the dialog does not grow
after it opens; a very tall window has no blank gap above OK. Both the
original layout and the stretching variants fail them.
- parity: misc.preferences-dialog evidence and what is still missing.
A bookmark made in the app always went to the top of the page. It now goes to
the top-left of the selected text, or with nothing selected to the top of the
window, as /XYZ left top null: the reader's zoom is kept, and with only the top
pinned so is the horizontal position.
- render: PageInfo::xyz_for_view, the inverse of dest_fraction. It pins only
the coordinates given; on a page turned a quarter the displayed y decides the
user left and the displayed x the user top.
- organize: add_bookmark_at and OutlineError::BadPosition (a coordinate that is
not finite is refused before anything changes).
- engine: Edit::AddBookmark takes left and top (None, None is the page top, as
before).
- automation: bookmark_add takes top and left in points from the top-left of the
displayed page, as bookmark_list reports them, bounded and refused when not a
usable number.
- ui: DocView::bookmark_position. It follows the window's vertical when the view
is turned a quarter (View > Rotate View), picks the selection's corner that
shows at the top-left, and in a spread of unequal pages uses the page that
crosses the window's top edge.
- parity: organize.bookmark-add evidence and what is still missing.
The Header and Footer dialog (also opened by Bates numbering) gets a
checkbox that turns on the shrink, and its preview shows the band the
page content shrinks into. The label is translated in every catalog (the
catalog checksums in ATTRIBUTION.toml follow). The parity entry for the
shrink is shipped, with its limits: annotations and added text and images
are not moved yet.
Adds a Finnish (Suomi, `fi`) catalog with 2,592 entries: every key of
the other bundled catalogs, written in sentence case from the English
labels. Finnish uses the one/other plural rule with the partitive
singular after any number but 1 (1 sivu, 2 sivua, 0 sivua).
Finnish is also a date language: calendar headings use the nominative
month (Lokakuu 2026) and dates the partitive (14. lokakuuta 2026).
Any fi-* locale selects it.
Tests cover registration, locale tags, persistence, plurals, calendar
wording, commands/tools, scanned UI literals, every bundled catalog key
and the Latin UI fonts. The catalog has its ATTRIBUTION.toml entry
(ATTRIBUTION.md regenerated with `cargo xtask assets --write`).
Clean-room, AI-assisted (Claude Code) translation; not yet proofread
line by line by a native speaker.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Once drawn, a line or arrow could be moved but not changed: selected, it showed a frame and
no handles, so a wrong length or angle meant drawing it again. A selected line, connected
lines, polygon or cloud now has a handle on each end or corner instead of the frame; dragging
one moves that point (Shift holds it to 45° from the point before), the new shape is drawn
while dragging, and the release is one undo step. The drawing tools keep drawing from an end
(a new line starts there); the Select and Fill & Sign tools pick the handles up.
pdfcraft_annot::set_points sets /L or /Vertices, lets /Rect follow with room for the width
and arrowheads (the rule a new comment is drawn with) and draws the appearance anew;
measurements keep the points they measured, locked comments their shape. Edit::ReshapeAnnotation
("Reshape comment"), comment_edit `points`; the comment list (Summary, DocInfo, comment_list)
carries a line's ends and a polygon's corners.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Treat predefined CJK CMaps and Adobe CID collections as alternative mapping routes. Resolve indirect metadata and reject unknown names and foreign registries without changing ToUnicode handling. Add synthetic checker and read-only automation regressions with red/green evidence.
Co-Authored-By: Claude Code <noreply@anthropic.com>
The page's Escape handler runs in logic(), before the UI is drawn, and
ignored open popups, so one Escape closed the main menu and also cleared
the text selection. It now leaves Escape to an open popup, as
combine_ui.rs already does for its keys; the next Escape clears the
selection as before.
UniJIS-UCS2-HW-H maps code 0x0020 to CID 231 / U+2002. The OpenType
substitute for a non-embedded Japanese CID font lacks that glyph, so
.notdef boxes were drawn. Type0Font::map_via_unicode now falls back to
the substitute's ordinary-space glyph for explicit spacing characters
its charmap lacks. Native and variation-selector glyphs keep priority;
PDF advances and Unicode text are unchanged.
Fixes#3601.
Co-Authored-By: Claude <noreply@anthropic.com>
es.tsv was missing 143 of the 2,674 (context, English) keys the other
bundled catalogs carry, so those strings fell back to English inside an
otherwise Spanish interface: every calendar month and weekday, the whole
certificate context of the signature inspector, the X.509 key usages, the
signature-revision and digital-ID lines, password validation, eight plural
messages, the combine-from-folder strings, the rendering and stale-file
notices and the tooltips that spell their shortcut out.
Spanish now covers the whole union, as lt and vi do: 2,531 -> 2,674 of
2,674, measured as docs/localization-parity.md describes. Counts there and
in ROADMAP.md re-measured against the current union; vi is restated at
2,674 for the same reason, still 100%.
Translations reuse the vocabulary already in the file (ID digital, Acercar
/ alejar, Portapapeles, A doble cara, Cortar y apilar) and were written
from the English labels, not from another implementation.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
On a page with no content of its own, an on-top watermark is the first
stream in /Contents, so it was counted with the behind-content marks and
a watermark added behind later was drawn over it. Nothing records
whether a watermark is behind, so a new behind mark now goes right after
the last background, which is always below any on-top watermark. A newer
behind watermark goes under older ones again, as before #3591.
Marks behind the page content were all inserted at the start of
/Contents, so a second background went under the first and the old
colour stayed. Backgrounds now come first, then behind-content
watermarks, each in the order added. A watermark added after a
background no longer disappears under it.
aiongg