The D90 writes 4352 x 2868 samples whose last 42 columns (from 4310) are
filler at a flat ~254, above its dark image samples (black 0). The
masked-column test only trims columns near zero, so they stayed in the
image and developed as a pink band on the right. Measured on 10 of 550
NEFs from one body: the camera's 4288 x 2848 JPEG sits at (10, 10), and
green saturates at 3840-3851 while red and blue run on to 4095, so one
white level of 3830 keeps clipped highlights white. The D90 joins the D4
in MEASURED_BODIES; other bodies are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Sony ARWs of cameras without measured colour matrices were edited on the
relative scale (6500 K / 0 = as shot). Their SR2SubIFD stores the
multipliers of the camera's presets at 2500, 3200, 4500, 6000 and 8500 K;
lightcraft_raw::kelvin_presets reads the as-shot multipliers on the curve
through them and they take the spectral matrices' place in the #730
design (as-shot Kelvin and tint only; look, Bradford adaptation and the
pixel-identical legacy upgrade unchanged).
Covered: ILCA-99M2, ILCA-77M2, SLT-A33, DSC-RX10, ILCE-3500, ILCE-7S.
Kelvin-dial shots read back 3400 -> 3396, 5200 -> 5193, 4700 -> 4708,
5600 -> 5594 K; Shade 7493 K. Off-curve constants (isotherm tilt 0.74,
tint spacing 1) measured from the 14 Sony bodies with both spectral
matrices and presets.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Masked lines are measured against the outermost line's level when it sits
just above BlackPoint (K-70, K-1), saturated outer lines count when dark
ones follow (645Z), and a frame whose interior is within the tolerance
keeps its whole area. Line means read samples with get(). Render cache
version 62: PEF frames change size.
An uncompressed Leaf Aptus 22 MOS keeps its 16-bit mosaic in IFD0
(compression 1, BlackIsZero, one sample per pixel) with no Make tag and
no CFA photometric, so `probe` returned None and the file imported as a
greyscale image of the mosaic. Leaf's data block, tag 0x8606 (LeafData
in the ExifTool EXIF tag-name documentation), now marks such an IFD0 as
a raw: OtherTiff, preview only with the reason, as the lossless-JPEG MOS
already is. A rendered RGB image that kept the block stays an image.
The Hasselblad Lunar is a Sony NEX-7 that writes an ARW under Make
HASSELBLAD; only SONY files reached the ARW reader, so it opened as its
preview. A HASSELBLAD file with Sony's raw coding (an IFD with
compression 32767 or the tone-curve tag 0x7010, which no 3FR / FFF has)
now goes there and decodes like a NEX-7: black 512, the SR2SubIFD white
balance. The Tag2010 white-balance fallback, the one table arw.rs keys
by model, takes the body from the maker note's SonyModelID (0xb001)
when the file is not Sony-branded.
Docs: the Lunar is verified in docs/raw/evidence.tsv (236 verified),
raw-parity.md, parity-checklist.md, gaps.md and whats-new.md.
RENDER_CACHE_VERSION 61 -> 62: a Lunar's thumbnails were rendered from
its preview.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The DNG CFAPattern describes the top-left of the ActiveArea, but RawImage::cfa is sensor-anchored (the crop to the active area shifts it by the area's offset). The DNG reader now moves the tag's pattern out to the sensor origin, and the DNG writer states the pattern back at the ActiveArea. A DNG whose area starts on an odd row or column (the Canon EOS 60D DNG of #1086, top 51) no longer reads RGGB as GBRG.
Cause: a floating-point CFA DNG is read as stored (no check of its float
samples). AHD and PPG clamp each green estimate between its two neighbouring
greens with `est.clamp(a.min(b), a.max(b))`; when both greens are NaN the
bounds are NaN and `f32::clamp` panics (ppg.rs:45, ahd.rs green pass). Any
float DNG with two adjacent NaN greens crashed decode + develop. Infinities
alone did not panic but turned into NaN in the demosaic arithmetic.
Fix, at two layers:
- demosaic: a `clamp_between` helper replaces the three clamps. With finite
or infinite bounds it is the same `f32::clamp` call (bit-identical
results); with NaN bounds it returns the estimate unclamped, so the panic
is gone whatever puts NaN into the mosaic.
- DNG decode: non-finite float samples are replaced where the white level is
known. NaN and -inf read as black (0), +inf as the white level (a clipped
highlight). No sensor records NaN or infinity, so a valid file is never
touched; finite samples, negative or above white included, stay as stored.
Tests: `demosaic::tests::non_finite_samples_do_not_panic` (NaN block, +/-inf
and an all-NaN mosaic through Bilinear, PPG and AHD; plus `clamp_between`
equal to the old clamp bit for bit over finite, signed-zero and infinite
values) and `non_finite_float_samples_decode_and_develop` (a float CFA DNG,
uncompressed and Deflate, with NaN and +/-inf samples: decoded values
checked, develop with all three methods gives a finite image). Both panicked
before the fix at ppg.rs:45 / ahd.rs.
Co-Authored-By: Claude <noreply@anthropic.com>
Version 66 keeps version 64's as-shot white balance and black level
offsets; its word 661 is below where the sensor clips, so the white
level stays measured from the data. Checked on 33 R6 Mark III files
from 12 shoots: all now open with their as-shot white balance, black
levels match the masked columns.
Co-Authored-By: Claude <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017JKdR4oZ3jRSPPwMLLTa2U
New export format `rendereddng` (export dialog: Format DNG, "DNG of: Rendered
photo"; `app.export`; MCP export tool): the rendered photo, with the edit,
crop, size, output sharpening and watermark baked in, written by the new
`lightcraft_raw::write_rendered_dng` as a LinearRaw DNG of 16-bit float Deflate
tiles in the export colour space. ColorMatrix1 (XYZ -> space), ForwardMatrix1
(space -> XYZ D50), a neutral AsShotNeutral and an identity ProfileToneCurve
make raw converters show it as rendered. HDR edits keep highlights above white.
Bad input (wrong sample count, zero or huge sizes, NaN/inf, out of half-float
range) gives an error or is clamped, never a panic.
Also fixes the Rust 1.99 clippy lint chunks_exact_to_as_chunks in
pipeline/spots.rs that fails `cargo xtask ci` on main.
Sources: Adobe DNG Specification 1.4+ (LinearRaw, ColorMatrix/ForwardMatrix,
ProfileToneCurve); own design.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
`preview_plan`'s assertions sat inside the `header_plan == Ready` branch, so a NEF, an ORF or a PEF
— whose header probe reads samples and whose header plan is therefore `Whole` — never had its
preview plan looked at, and neither did any file the header plan declines. The display path wants
exactly that answer, so both plans are now asked for every corpus file, and the preview the plan
hands on must be the whole file's with the skipped bytes `0` and again `0xFF`; `Whole` stays a
legitimate answer (that format reads whole for a preview too) and is counted. The test prints what
each format reads for both plans.
Co-Authored-By: DeepSeek V3.2 <noreply@deepseek.com>
On merge: the quick preview path orients like the whole-file path (preview_orientation with the
raw's header prefix, so a portrait raw whose embedded JPEG carries no orientation is not sideways),
and its doc links point at preview_window.
bflatastic