On wasm32 usize is 32-bit, so 65536 x 65536 wraps to 0 and products like w * h,
w * h * cpp, fw * fh * nc and row_bytes * ch wrapped past their own validation and let
later true-dimension indexing panic (profile.web sets panic = abort). All the enumerated
sites now validate through a checked u64 gate:
- lightcraft-raw gains checked_pixel_count(width, height) (u64, capped at MAX_SAMPLES),
used by the ARW decode head (the strip-length equality now compares the true sample
count, not a wrapped one) and by RawImage::check's data-length validation;
- the CR2 lossless-JPEG frame size is checked in u64 on both the Full and Header paths
(it used to be clamped AFTER wrapping), and the no-slices width fallback is checked;
- the TIFF DEFLATE chunk's inflate length is checked and capped before the cast;
- lightcraft-codecs gains checked_sample_buf_len for the finish() buffer bound, compared
in u64 via try_from so no cast truncates on 32-bit.
Tests pin the gate arithmetic with values that would wrap 32-bit usize (65536 x 65536,
u32::MAX x 2, 2^30 x 4). cargo check --target wasm32-unknown-unknown passes for both
crates. The issue's suggested wasm32 arithmetic-side-effects clippy pass is a follow-up.
The decoders keep the alpha plane, but to_working converted only the
colour, so transparent pixels kept the black most encoders store under
them: renders, previews, exports and contact sheets showed it. The
working image is now flattened onto white, in linear light like the
rest of the pipeline.
codecs::print converts a composed print page (16-bit RGB in the Rec2020 output encoding) to the
samples a print-ready file carries:
- PrintTarget::Profile(icc): a printer / paper profile, RGB, CMYK or grey, matrix or LUT based,
converted with moxcms; PrintTarget::Managed(space): the printer manages colour and the page goes
in sRGB or Adobe RGB with that profile embedded.
- Perceptual or relative colorimetric (ProofIntent, as soft proofing).
- Black point compensation for relative colorimetric: the device's darkest is measured by a round
trip of black through the profile and linear values are scaled to land the page's black there
(Y' = Y(1 - Yb) + Yb, the published mapping for a neutral destination black), so shadows below
the ink's black no longer clip to one value. Perceptual tables keep their own black mapping.
- Print adjustment brightness / contrast (-100..100) on the sRGB-encoded values, black and white
held, monotonic at every setting.
Everything before the profile is per channel and folds into one 16-bit table; pages convert in
bounded batches (parallel with the `parallel` feature). Hostile profiles, half pixels and NaN
settings are errors or neutral, never panics. Not wired to the print job yet.
AVIF HDR export takes hdrTransfer = pq | hlg (export dialog: HDR curve;
MCP export schema lists it). HLG writes CICP transfer 18 and no clli box.
The window logs whether it shows HDR; today always SDR (eframe configures
an 8-bit surface), with the platform / surface format / headroom / opt-out
rules unit-tested. Also satisfies clippy 1.99's chunks_exact_to_as_chunks
in spots.rs.
Part of #868.
Sources: ITU-R BT.2100 (HLG OETF, inverse OOTF with system gamma 1.2),
ITU-R BT.2408 (203 cd/m2 reference white at 75 % HLG); own design for
the display decision.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Photo > Edit In > Edit in PhotoCraft (Cmd+Shift+E, also on the photo
context menu) renders a copy with the edits as a flat 16-bit PSD, which
PhotoCraft saves back to in place, stacks it on the original and opens
it in PhotoCraft, found where its installers put it. Edit in Other
Editor (Cmd+Alt+E) keeps the configured program. Per-editor format,
colour space and bit depth in Settings > External Editing. Export gains
a flat PSD format.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01T4kqvR9KVCPia3SSXyB8WG
View > Export Slideshow... (and Export PDF / JPEG / Video in Settings >
Slideshow) writes the photos in view as their composed slides, between
the intro and ending screens that are on:
- PDF: a page per slide (1024/1920/3840 px long side, JPEG quality),
/Dur and /Trans fades per page, optional /PageMode /FullScreen. The
contact sheet's writer moves to engine/src/pdf.rs and streams to disk.
- JPEG: <name>-001.jpg... in a folder.
- Video: AV1 (rav1e, speed 10, low latency) in MP4 or WebM written by
our own muxers (codecs/src/video.rs); fades rendered as blended frames,
held slides one key-frame sample with a long duration; 720p/1080p,
24/30 fps; no audio; capped at 2 hours.
slideshow.export runs in the background with a row in the activity
stack (activity.cancel stops it); outputs are written as .part and
renamed when complete, so cancel or failure leaves nothing behind. A
photo that can't be rendered is skipped with a warning.
slideshow.exportStatus reports the result.
Soft Proofing's Profile menu takes a printer / paper ICC profile (Other…;
`view.softProof {profile, intent, paperInk}`), RGB or CMYK, matrix or LUT.
The CMS (moxcms) builds a 33^3 proof table over the working space: forward with
the chosen intent (Perceptual / Relative), back relative colorimetric; the
destination gamut warning comes from the colorimetric round trip. Simulate
Paper & Ink renders absolute colorimetric: the profile's media white replaces
screen white and the ink black is unscaled. The pipeline gets the table by id
(`Proof::profile`, `register_proof_profile`), so Proof stays Copy and render
keys include it. Proof copies are named after the profile.
Sources: ICC.1:2022 (rendering intents, media white point, absolute
colorimetric); own design for the proof table.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
With HDR output on, a photo edited in HDR exports as a 16-bit PNG with the PQ
curve in Rec. 2020 (SDR white at HDR_REFERENCE_WHITE_NITS), described by a
`cICP` chunk (PNG third edition: BT.2020 primaries, PQ, RGB, full range) and
a `cLLI` content light level chunk (the levels the HDR AVIF records). EXIF,
XMP and print resolution are kept; no ICC profile next to cICP. Photos without
an HDR edit, and HDR edits with HDR output off, export as before.
`codecs::encode_png_pq` sits next to `encode_avif_pq` and takes the same
input. Follow-up to #646, ported from #466.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Export as JPEG XL from the dialog, CLI, MCP and control channel (format jxl): lossy with
quality or lossless, 8/16-bit, effort fast/normal, progressive, EXIF/XMP boxes; HDR edits
as 16-bit Rec. 2020 PQ. Encoder: jixel (pure Rust, BSD-3-Clause OR Apache-2.0, native
only: it spawns its own threads), wrapped in catch_unwind. Lossy files declare an enum
encoding (sRGB / P3 / Rec. 2020; Adobe RGB and ProPhoto written as Rec. 2020); lossless
files embed the ICC profile.
Decoder fix: jxl-oxide desaturated colours outside sRGB when rendering XYB images to
wider primaries; lossy wide-gamut JXL now renders to linear sRGB primaries and is
converted to Rec. 2020 here. jixel's slowest effort is left out: jxl-oxide misdecodes
its (valid) files.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
`encode_avif_pq`: linear Rec. 2020 with SDR white at 1.0 → PQ (SDR white at
203 cd/m², BT.2408), BT.2020 NCL YCbCr 4:4:4, 10-bit, with CICP nclx
(9/16/9, full range) and a clli box. ravif fixes the sRGB curve, so this
drives the rav1e + avif-serialize it already uses (no new crates).
Export: AVIF with `hdr` renders the HDR edit in Rec. 2020 and writes PQ.
Photos without an HDR edit export as before, in every format. CoreImage
decodes the file as HDR (same 3.1 % of the frame above SDR white as the gain
map JPEG of the same edit).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
`lightcraft_codecs::gainmap`:
- `compute` measures a gain map (luminance or RGB, log2, block-averaged)
from an SDR and an HDR rendition; `apply` rebuilds the HDR rendition.
- ISO 21496-1 metadata: writer (fixed denominator) and reader (also the
common-denominator form; refuses unknown versions, backward maps and zero
denominators). Adobe `hdrgm` XMP reader and writer, per-channel values as
rdf:Seq; Apple's HDRGainMap/HDRToneMap description of the same map.
- `encode_jpeg`: base with CIPA DC-007 MPF index (gain map typed 0x050000),
the ISO marker and Container XMP merged into the user's packet, followed by
the gain map JPEG. `read_jpeg` / `is_gain_map_jpeg` find and decode the map.
Also: gain map images are no longer picked as embedded thumbnails (an Ultra
HDR JPEG could show its greyscale gain map in the grid). The JPEG APP-segment
building is shared with `encode_jpeg`. Fuzzed with the other decoders.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
heic-rs reconstructs iPhone HEVC tiles bit-exactly (checked against libde265), but
its colour stage was 2-27 code values off libheif on every iPhone photo: it ignores
the HEVC VUI and assumes BT.709 limited range. lightcraft-heif now converts YCbCr
itself (nclx, else VUI, else H.265 defaults; nearest chroma, bilinear for odd clap
offsets, as libheif), inherits tile ICC/nclx on grids, follows libheif's imir axis
and clap rounding, and outputs 16-bit RGB. Measured on 30 real and synthetic
files: within 1 code value of libheif (pillow-heif 1.8 / libheif 1.23).
Also: HEIF header reader for import (no pixel decode), embedded thumbnail for small
decodes, nclx/VUI colour hint (shared CICP mapping with PNG), clear 4:2:2/4:4:4
Unsupported error, Format::not_decodable as the one source of "why not" (import
reports "HEIC/HEIF support isn't included in this build"), `.heif` imports.
Release packaging and Nix build with the heif feature, as whats-new promised.
lightcraft_heif::testdata writes lossless (PCM) synthetic HEICs for the tests.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Previews were always sRGB, which wide-gamut monitors show oversaturated.
Settings > Display > Choose Profile... (and the UI command
app.displayProfile) now shows photos through the monitor's ICC profile,
matrix/TRC or LUT-based.
- codecs: DisplayProfile (moxcms): the display's primaries (colorant tags,
or measured through the A2B tables of a LUT-only profile), the proxy ->
device correction (per-channel curve tables for matrix/TRC profiles, a
CMS transform for LUT profiles) and sRGB <-> display transforms.
- pipeline: DisplaySpace / RenderRequest::display: the per-pixel stage
renders into the display's primaries and gamut maps into its gamut
(CPU and GPU: only to_out / out_luma change). Soft proofing's display
gamut warning uses the display's gamut.
- engine: RenderJob::with_display; display::present converts sRGB
results (thumbnails, cached previews, embedded JPEGs). Histograms and
the preview caches stay sRGB; exports are unchanged.
- ui: the loupe, Before, Compare, hover and second window render for the
display; everything else is converted on the render workers. Settings >
Display tab, ui.json setting, file picker opening in the system's ICC
folder.
Tests: profile parsing and transforms (sRGB, P3, gamma 2.2, a synthetic
LUT-only profile, corrupted files), display renders equal 8-bit renders
into the matching output space, sampled histograms, and a headless UI test
of the whole flow. docs/display-profiles.md describes the design.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01WEuxxPyG8t6KcADbZSEAUj
Resolve the docs/parity.md conflict, keep the HEIC rows. `cargo xtask ci` gets
a heif step (clippy + tests for lightcraft-codecs with --features heif), since
the workspace build leaves the feature off. The Cargo.toml comments no longer
say official builds enable it; the web one notes that wasm32 aborts on panic.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The import probe of a non-raw image decoded it (at a 64 px fit, which for
JPEG still entropy-decodes every block and for PNG inflates everything)
only to learn its stored size and orientation: ~95 % of import CPU.
lightcraft-codecs gets `read_header(bytes) -> Header { format, width,
height, orientation }`: JPEG from its markers (EXIF orientation), PNG from
its chunks (IHDR, eXIf anywhere), TIFF from the first IFD (tiff crate,
no strips read), WebP from its RIFF chunks / bitstream header (image-webp),
PSD from its header and image resources. GIF, BMP and JPEG XL keep the
small decode. `files::probe_bytes` uses it; raw handling is unchanged.
The TIFF colour-layout check is shared with the decoder (`layout`).
Measured (release, 4 cores, throwaway benchmark, per file, bytes in
memory): 200 generated 4000x3000 JPEGs (3.6 MB): 72.7 ms -> 2.1 ms
(read_header alone 1.05 ms; the rest is the content hash and metadata);
20 PNGs (30.8 MB): 236-265 ms -> 9.0-9.6 ms.
Corrupt files (behaviour note): the header readers also refuse what a
decode refuses before the pixels (unsupported layout, compression, frame
type, bad IHDR, ...) and truncated files: a JPEG whose markers don't reach
its EOI, a PNG cut before the chunk after its IDAT run, TIFF strips/tiles
that start past the end, a WebP image chunk or PSD merged data past the
end. So truncated files (interrupted copies, partial downloads) are still
marked `error` in the import review, as before; tests check that whenever
the old decode accepted a (cut or byte-mutated) file the header agrees.
Changed: damage *inside* compressed data that is all present (flipped or
garbled bytes) was refused at scan and is now imported, and shows as
unreadable ("!" in the grid) when rendered. Also: tiny JPEGs (< 128 px)
were decoded leniently by the old probe, so a truncated one imported; it
is now refused. A TIFF truncated inside its last strip is not detected
(StripByteCounts are often overstated, so only strip starts are checked).
Tests: header readers vs decode on generated JPEG/PNG/TIFF/WebP/PSD/BMP
with and without EXIF/TIFF orientation; truncations and random mutations
agree with decode; hostile headers (zero/absurd sizes, bad lengths,
truncation, garbage) are errors; read_header added to the fuzz tests;
probe_bytes oriented dims match the decode-based values.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01912WaK6Rmew3wxZuPyX7E8
New crate `lightcraft-heif` (a port of PhotoCraft's photocraft-heif): a thin,
panic-guarded wrapper around heic-rs (pure Rust, pinned =0.1.1) - 8/10-bit,
alpha, grid tiles, container irot/imir/clap, ICC/EXIF/XMP. `lightcraft-codecs`
decodes HEIF behind its non-default `heif` feature (HEVC patents are the
distributor's call, the same policy as PhotoCraft); the apps forward it. HEIC
files stay recognised without the feature: opening one is a clear
"isn't included in this build" error. Fuzz-found heic-rs panics arrive as
regression fixtures (inline bytes, no media committed).
Verified end-to-end on real iPhone HEICs (lightcraft-cli render, rotation and
metadata correct). Note for reviewers: measured here, the engine currently
ignores the decoded image's source-space matrix on export for ANY format (a
true Display-P3 PNG round-trips unchanged); the ICC and space are carried for
all codecs, so this inherits - and does not worsen - existing behaviour.
Co-Authored-By: opencode <noreply@opencode.ai>
Non-JPEG thumbnail fallbacks decode at source resolution before resizing, so
the output size does not bound memory. ThumbnailOptions gains max_pixels
(default 64 MP, previously about 1 GP via DecodeOptions::fit); larger sources
return Error::TooLarge. Nothing in the workspace calls decode_thumbnail yet.
WebP RIFF chunk lengths are untrusted: set_memory_limit(bytes.len()) stops a
tiny truncated file requesting gigabytes for metadata. In image-webp 0.2.4
the limit applies only to ICC, EXIF and XMP chunks. Fuzz tests cover both;
the roundtrip test only switches to struct update syntax.
Split from a327b98 (T0 thumbnail work), where it was bundled.
Co-authored-by: Codex <noreply@openai.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- catalog store: the journal appender is a let-else with an io::Error,
not expect("appender just opened").
- catalog dates: group_label slices with get(), so a non-ASCII key of a
date's length no longer panics mid-character (regression test).
- codecs jpeg_par: rows come from map_while instead of next().unwrap().
- lightcraft-codecs and lightcraft-catalog now #![deny] unwrap/expect/
panic/unimplemented/todo/unreachable (one test let-else uses panic!
instead of unreachable!); clippy.toml as in the steering PR.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Own T.81 encoder: Annex K tables, JFIF YCbCr 4:4:4/4:2:0 + gray, EXIF/XMP/ICC segments, bands of MCU
rows separated by RSTn so entropy coding runs on all cores. Per-core speed matches jpeg-encoder at 4:4:4
(225 vs 237 ms on 24 MP, single thread); with all cores 24 MP encodes in ~130 ms vs ~500–800 ms
(loaded machine). Output decodes with jpeg-decoder and zune-jpeg (odd sizes tested); same-or-smaller
files at equal/higher PSNR. 4:2:2 keeps jpeg-encoder. Bench: crates/codecs/examples/jpeg_bench.rs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Property tests (random bytes behind every magic, mutated/truncated files),
corpus tests (corpus/images, pngsuite, raw routing, system ICC profiles),
ignored 24 MP JPEG benchmark, decode_thumbnail_with(min_embedded_edge),
fast deflate levels for PNG/TIFF, README with formats, licences, gaps.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Decoders (JPEG via zune-jpeg + jpeg-decoder for DCT scaling/CMYK, PNG,
TIFF, WebP, GIF, BMP, PSD composite, JPEG XL via jxl-oxide) produce linear
Rgb32f in source primaries with SourceSpace; ICC matrix/TRC applied exactly,
LUT/CMYK profiles through moxcms; to_working() to linear Rec.2020 D65.
Encoders: JPEG, PNG 8/16, TIFF 8/16/32f, lossless WebP, AVIF (native).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
aiongg