Merge PR #2427: i18n: complete the Simplified Chinese (zh-hans) catalog (162 missing strings)

crates/ui-egui/locales/zh-hans.json: union of both sides' keys

crates/ui-egui/locales/zh-hans.json

@@ -2200,5 +2200,162 @@
   "Import dropped files without review": "不经检查直接导入拖入的文件",
   "An import is running": "正在导入",
   "An import is running. Drop photos when it has finished": "正在导入。导入完成后再拖放照片",
-  "Finish Lightroom catalog import before adding photos": "添加照片前，请先完成 Lightroom 目录的导入"
+  "Finish Lightroom catalog import before adding photos": "添加照片前，请先完成 Lightroom 目录的导入",
+  "\"saved in memory but not written to disk\", the top bar shows a warning, and LightCraft keeps retrying until the": "“已保存在内存中但未写入磁盘”，顶栏会显示警告，LightCraft 会持续重试，直到",
+  "#106): a DNG is checked against the raw data, written to a temp file, synced and read back before it gets its": "#106）：DNG 会先与原始数据核对，写入临时文件、同步并读回校验，然后才获得其",
+  "(`gpuReason`, `gpuFallback`), Help ▸ System Info and Settings ▸ Performance say why the GPU isn't": "（`gpuReason`、`gpuFallback`）——帮助 → 系统信息 和 设置 → 性能 会说明为何未使用 GPU",
+  "(e.g. D750, D780, D850, D7500, Z 50) no longer render nearly black or with crushed shadows: their black level was": "（如 D750、D780、D850、D7500、Z 50）不再近乎全黑或阴影死黑：其黑电平之前被",
+  "(issue #94): an HTTP request from a web page can no longer carry a command in its body. Lines are capped at": "（问题 #94）：网页发出的 HTTP 请求不再能在请求体中携带命令。每行长度上限为",
+  "123 on studio-mac)\") instead of letting both write and silently drop each other's edits. A crash never leaves the": "123（位于 studio-mac）\"），而不是让双方同时写入、悄然丢弃彼此的编辑。崩溃绝不会让",
+  "1620 × 1080 preview, and import with their metadata: capture time, camera, lens, exposure, GPS and XMP. Their raw": "1620 × 1080 预览，并连同其元数据一起导入：拍摄时间、相机、镜头、曝光、GPS 和 XMP。它们的原始数据",
+  "23 new built-in presets: Portrait, Landscape, Urban, Food, Seasons, Vintage and B&W toners.": "新增 23 款内置预设：人像、风光、城市、美食、四季、复古和黑白调色。",
+  "4 MiB and connections at 16.": "4 MiB，连接数上限为 16。",
+  "630 drivers): on Windows the window and GPU rendering use DirectX 12 only and never load the Vulkan driver unless": "630 显卡驱动）：在 Windows 上，窗口和 GPU 渲染仅使用 DirectX 12，除非明确要求，否则绝不加载 Vulkan 驱动",
+  "`img_1-1.JPG`; on case-insensitive volumes the case change still goes through.": "`img_1-1.JPG`；在大小写不敏感的卷上，大小写更改仍会生效。",
+  "`Photos/2026/20260114/20260114_001.jpg`) together with their XMP sidecars; each original leaves the card only after its": "`Photos/2026/20260114/20260114_001.jpg`）连同其 XMP 附属文件；每张原图只有在其",
+  "A change that can't be saved to disk (full or unplugged drive) is no longer silent: the command reports": "无法保存到磁盘的更改（磁盘已满或已拔出）不再无声失败：命令会报告",
+  "a full drive) no longer counts as built and Build Smart Previews replaces it.": "（磁盘已满）不再被算作已构建，可用“构建智能预览”重新构建。",
+  "A library is open in one program at a time (issue #99): opening a library that LightCraft or `lightcraft-cli` already": "一个图库同时只能由一个程序打开（问题 #99）：打开 LightCraft 或 `lightcraft-cli` 已打开的图库时",
+  "A save that fails part-way (a full disk, a network share that drops) no longer looks like a damaged catalog": "保存中途失败（磁盘已满、网络共享断开）不再表现为图库损坏",
+  "A sleeping NAS, a dropped network share or a USB drive spinning up no longer freezes the window (issue #104):": "休眠的 NAS、断开的网络共享或正在启动的 USB 硬盘不再让窗口卡死（问题 #104）：",
+  "afterwards (issue #101): the partial write is cut off before LightCraft retries, so the next launch replays every": "之后（问题 #101）：部分写入会在 LightCraft 重试前被截断，因此下次启动会重放所有",
+  "again. Change the period (or turn it off) in Settings → Performance.": "在 设置 → 性能 中更改周期（或将其关闭）。",
+  "against the library's originals no longer scans the whole library when nothing is at that path.": "与图库原图核对时，若该路径下没有文件，不再扫描整个图库。",
+  "AI masks with SAM 3 (Object and Describe in the Masking panel): click an object to select it (⌥-click leaves a": "AI 蒙版使用 SAM 3（蒙版面板中的“对象”和“描述”）：点击对象即可选中（⌥-点击会留下一个",
+  "already has a `thumbs/` folder of other pictures no longer loses them when the cache is trimmed or cleared.": "已包含其他图片 `thumbs/` 文件夹的图库，在缓存清理时不再丢失这些图片。",
+  "and checks the file before using it. Masks keep their selection, so they render and export without the model.": "并在使用前检查文件。蒙版会保留其选区，因此无需模型即可渲染和导出。",
+  "and every imported photo as one zip, and File ▸ Restore Library from Backup… brings it back (the current library": "以及每张导入的照片打包为一个 zip，文件 → 从备份恢复图库… 可将其还原（当前图库",
+  "and never freezes the window. It is optional and not part of LightCraft (Meta's SAM License, about 3.4 GB): the": "并且绝不会让窗口卡死。它是可选的，不属于 LightCraft 的一部分（Meta 的 SAM 许可，约 3.4 GB）：",
+  "as `<name>.corrupt-<time>` and you're told; one that can't be read (e.g. locked by another program) is left alone": "保存为 `<name>.corrupt-<时间>` 并会收到提示；无法读取的（如被其他程序锁定）则保持原样",
+  "asked to. `LIGHTCRAFT_GPU_BACKEND=dx12 | vulkan | metal | off` (or wgpu's `WGPU_BACKEND`, which GPU rendering": "按需使用。`LIGHTCRAFT_GPU_BACKEND=dx12 | vulkan | metal | off`（或 wgpu 的 `WGPU_BACKEND`，GPU 渲染",
+  "Auto Sync: edits apply to every selected photo. Auto B&W mix. Automatic versions.": "自动同步：编辑应用于每张选中的照片。自动黑白混合。自动版本。",
+  "Auto-Tag from Tracklog: GPS locations for your photos from a GPX track log, matched by capture time.": "从轨迹记录自动标记：根据 GPX 轨迹记录中的 GPS 位置，按拍摄时间为照片添加定位。",
+  "Browser version (experimental), keeping a library safe (issue #107): File ▸ Back Up Library… downloads the catalog": "浏览器版本（实验性）下的图库安全（问题 #107）：文件 → 备份图库… 会下载目录",
+  "bundles of any of these — whole folders at once, grouped by pack. Masks inside presets come along.": "这些类别的合集——可一次导入整个文件夹，按包分组。预设中的蒙版会一并导入。",
+  "camera no longer gets baked in. Photos already imported as \"preview only\" switch over on Reload. (Files that": "相机设置不再被固化进照片。已以“仅预览”方式导入的照片会在重新加载后切换。",
+  "Canon CR2 photos from the EOS 7D, 50D, 60D, 550D, 600D, 1200D, 1300D, 5D Mark II and 1D Mark IV (and other": "来自 EOS 7D、50D、60D、550D、600D、1200D、1300D、5D Mark II 和 1D Mark IV（及其他",
+  "Canon CR3 files show their full-size embedded JPEG (e.g. 6960 × 4640 on an EOS R6 Mark III) instead of the": "Canon CR3 文件显示其全尺寸内嵌 JPEG（如 EOS R6 Mark III 上的 6960 × 4640），而不是",
+  "Canon EOS R5 Mark II C-RAW files that opened as \"preview only\" (more than half of them, depending on the": "此前只能以“仅预览”方式打开的 Canon EOS R5 Mark II C-RAW 文件（其中超过半数，视",
+  "change. Catalogs already holding such a fragment load in full. Quitting while the catalog log can't be written": "变更。已包含此类片段的目录会完整加载。在目录日志无法写入时退出",
+  "changes couldn't be saved tries once more, then asks: Try Saving Again, Quit Anyway or Cancel.": "更改未能保存时，会再尝试一次，然后询问：再次尝试保存、仍要退出 或 取消。",
+  "channel or MCP, a merge preview path or `lightcraft-cli render IMG.jpg -o IMG.jpg` is refused with a clear": "通道或 MCP，合并预览路径或 `lightcraft-cli render IMG.jpg -o IMG.jpg` 会被明确拒绝，并给出清晰的",
+  "checked against the content read from the card. A copy that fails or differs is removed and reported as a failed": "与从存储卡读取的内容进行核对。复制失败或内容不一致的文件会被移除，并报告为复制失败",
+  "Cmd+Shift+R, keeps the photo and clears its edits.)": "Cmd+Shift+R，保留照片并清除其编辑。）",
+  "colour and tone look fitted to the camera's own JPEG, as Nikon and Sony raws do, framed in the aspect ratio set in": "色彩和色调外观与相机自带的 JPEG 相匹配，如同 Nikon 和 Sony 的 RAW 文件，并按设置的宽高比取景",
+  "Colour-label filter with several labels at once; expandable folder tree in Local.": "可同时按多个颜色标签筛选；“本地”中可展开的文件夹树。",
+  "Colour-range masks: click the photo to sample. Luminance ranges: range bar, smoothness, luminance map.": "颜色范围蒙版：点击照片取样。亮度范围：范围条、平滑度、亮度映射。",
+  "Compressed Nikon NEFs (lossless and lossy compressed, 12- and 14-bit — e.g. D3200, D5100, D7000, D750, D850, Z 50)": "压缩的 Nikon NEF（无损和有损压缩，12 位和 14 位——如 D3200、D5100、D7000、D750、D850、Z 50）",
+  "Convert to DNG, Copy as DNG, Photo Merge and smart previews no longer write straight to the final file (issue": "转换为 DNG、复制为 DNG、照片合并和智能预览不再直接写入最终文件（问题",
+  "copy is verified and in the library. Duplicates and files that fail stay where they were.": "复制完成后经过验证并入库。重复文件及失败的文件保持原位。",
+  "Copyright status, rights usage terms and copyright info URL in Info, metadata presets and exports.": "信息面板、元数据预设和导出中包含版权状态、权利使用条款和版权信息 URL。",
+  "data is not decoded yet, so they stay preview-only. For CR3s imported earlier, Photo ▸ Reload from Disk (now in": "数据尚未解码，因此仍为仅预览。对于之前导入的 CR3，照片 → 从磁盘重新加载（现位于",
+  "edge are cropped away, and \"12-bit uncompressed\" files are no longer clipped. The RX100 series renders much closer": "边缘被裁掉，且“12 位未压缩”文件不再被截断。RX100 系列渲染效果与",
+  "Edge setting, and get a sharper zoomed-in pass in the background. The model runs inside LightCraft in pure Rust": "“边缘”设置，并在后台获得更清晰的放大渲染。该模型以纯 Rust 在 LightCraft 内部运行",
+  "Edit in External Editor (⇧⌘E): a 16-bit TIFF copy, stacked, refreshed when you come back.": "在外部编辑器中编辑（⇧⌘E）：生成 16 位 TIFF 副本、与原图堆叠，返回后自动刷新。",
+  "every format the cameras write. Most bodies opened as preview only before: GH1–GH5, the G, GX, GF, GM, FZ, LX and": "相机支持写入的每一种格式。此前大多数机身只能以仅预览方式打开：GH1–GH5，以及 G、GX、GF、GM、FZ、LX 系列",
+  "Export file names use the Rename Photos tokens ({title}, {seq:2}, {date:%Y-%m-%d}…), plus new {num}, {folder}, {lens}, {iso}, {rating}, {creator}.": "导出文件名支持“重命名照片”的标记（{title}、{seq:2}、{date:%Y-%m-%d}…），并新增 {num}、{folder}、{lens}、{iso}、{rating}、{creator}。",
+  "export. The catalog, XMP sidecars, settings, DNGs, merges, smart previews and the copies an import makes are still": "导出。目录、XMP 附属文件、设置、DNG、合并结果、智能预览以及导入产生的副本仍会",
+  "Exported files are written to a temp file and then renamed into place, so a full disk or an unplugged drive": "导出文件会先写入临时文件，再重命名到位，因此磁盘已满或硬盘被拔出",
+  "Exports and renders never write over a photo's original (issue #93): exporting into the photo's own folder with": "导出和渲染绝不会覆盖照片原图（问题 #93）：当导出到照片所在文件夹且使用",
+  "Exports are never black because of the GPU (issue #78): a GPU render that runs out of device": "导出永远不会因为 GPU 而变黑（问题 #78）：GPU 渲染耗尽设备",
+  "Faster exports and card imports, with the same protection for what can't be recreated (issue #134): exports,": "更快的导出和存储卡导入，对无法重建的内容提供同等保护（问题 #134）：导出、",
+  "fields in and keeps the rest — e.g. that application's develop settings and edit history — byte for byte. A": "字段合入其中，其余部分（如该应用的显影设置和编辑历史）则逐字节保留。",
+  "file (Sony stores them only in scrambled maker-note data on these bodies), the few columns of padding at the right": "文件（Sony 在这些机身上仅将数据存储在加密的制造商注释数据中），右侧几列填充像素",
+  "first time you use an AI mask, LightCraft asks before downloading it, shows the progress, can cancel and resume,": "首次使用 AI 蒙版时，LightCraft 会在下载前征询同意，显示进度，可取消和续传，",
+  "for the session instead of being overwritten with defaults. The app settings (`ui.json`, which remembers your": "在本次会话中生效，而不会被默认值覆盖。应用设置（`ui.json`，记录您的",
+  "gets -1, -2… instead of being replaced.": "会得到 -1、-2… 而不是被替换。",
+  "greenish neutral rendering (issue #150); white balance is adjusted relative to the as-shot look. 12-bit NEFs": "发绿的中间调渲染（问题 #150）；白平衡会相对于拍摄时的外观进行调整。12 位 NEF",
+  "has open — on this computer or another one sharing the folder — says who has it (\"already open in LightCraft (process": "正在打开——在本机或共享该文件夹的其他电脑上——会说明是谁在打开（“已在 LightCraft 中打开（进程",
+  "how to restore it or delete it permanently and import it afresh. (For a fresh start on a photo, Reset Edits,": "如何恢复它、永久删除它，或重新导入。（若要重新开始编辑某张照片，可使用“重置编辑”，",
+  "If your library can't be opened at launch (open in another program, unreadable, on a drive that isn't connected,": "如果您的图库在启动时无法打开（被其他程序占用、无法读取、位于未连接的驱动器上，",
+  "ignored before) chooses the graphics backend; `off` renders on the CPU. The GPU now starts after the window": "此前会被忽略）选择图形后端；`off` 表示使用 CPU 渲染。GPU 现在会在窗口",
+  "immutable, and HOSTING.md describes the actual build.": "不可变，HOSTING.md 描述了实际构建方式。",
+  "Import presets from other editors: XMP presets, classic `.lrtemplate` files, \"DNG presets\" from mobile apps and `.zip`": "从其他编辑器导入预设：XMP 预设、经典 `.lrtemplate` 文件、来自手机应用的“DNG 预设”以及 `.zip`",
+  "import — so \"import complete\" means the copies are good before you format the card — and a name that is taken": "导入——因此“导入完成”意味着在格式化存储卡前副本完好——若名称已被占用",
+  "Import ▸ Copy verifies every copy, like Move (issue #96): each file is written as a new file, synced to disk and": "导入 → 复制 会像移动一样校验每一份副本（问题 #96）：每个文件都作为新文件写入、同步到磁盘并",
+  "Import ▸ Move: photos go into the destination (with the same folders and renaming as Copy, e.g.": "导入 → 移动：照片移入目标位置（文件夹结构和重命名规则与“复制”相同，例如",
+  "Import: copy to any folder, by day / by month / one folder, rename on import, metadata preset, Copy as DNG.": "导入：复制到任意文件夹、按天/按月/单文件夹、导入时重命名、元数据预设、复制为 DNG。",
+  "imported as \"preview only\" switch over on Reload.": "以“仅预览”方式导入的照片会在重新加载后切换。",
+  "imported earlier switch over with Photo ▸ Reload from Disk.": "之前导入的照片可通过 照片 → 从磁盘重新加载 切换。",
+  "in short pieces so slow integrated GPUs aren't reset by their watchdog. `ui.inspect` → `perf`": "分小段发送，以免慢速集成 GPU 被其看门狗重置。`ui.inspect` → `perf`",
+  "incomplete is redone on the CPU — the file is the same image either way. Work is sent to the GPU": "未完成的渲染会在 CPU 上重做——无论哪种方式，文件都是同一张图像。任务会发送给 GPU",
+  "is kept). A failed save (storage full) now shows the unsaved warning and is retried, a photo that can't be stored": "会被保留）。保存失败（存储已满）现在会显示未保存警告并重试，无法存储的照片",
+  "is refused and nothing is overwritten.": "会被拒绝，不会覆盖任何内容。",
+  "is up, and only when Settings ▸ Performance ▸ Use the GPU for rendering is on; if LightCraft ever dies while": "已启动，并且仅在 设置 → 性能 → 使用 GPU 渲染 开启时生效；如果 LightCraft 在",
+  "isn't added, a second tab shows a message instead of overwriting the first, `?reset` asks first, and the page says": "未添加，第二个标签页会显示提示而不是覆盖第一个，`?reset` 会先询问，页面会显示",
+  "it away from the other (issue #92). Find Missing Photos also finds renamed files by their content, prefers a content match": "将其与另一个区分开（问题 #92）。“查找缺失的照片”也会按内容查找重命名的文件，优先内容匹配",
+  "its photos and XMP sidecars, and the photos point at it again. If something now occupies the old place, the undo": "其照片和 XMP 附属文件随之移动，照片再次指向新位置。如果原位置已被占用，撤销操作",
+  "JPEG with the same name (`IMG_0001.CR3` + `IMG_0001.JPG`) no longer share one sidecar: the raw keeps `IMG_0001.xmp`,": "同名的 JPEG（`IMG_0001.CR3` + `IMG_0001.JPG`）不再共用一个附属文件：RAW 文件保留 `IMG_0001.xmp`，",
+  "layout is read from each file instead of assumed.": "布局会从每个文件中读取，而不是假设。",
+  "leaves no DNG and keeps the raw. Smart previews are written the same way; a damaged one (cut short by a crash or": "不留下 DNG，并保留原始文件。智能预览采用同样的写入方式；损坏的（因崩溃或",
+  "library locked: the lock is the operating system's and goes away with the program.": "图库已锁定：该锁由操作系统持有，随程序退出而解除。",
+  "library) are written atomically and saved as soon as you open another library, not only at quit. Quitting while": "图库）采用原子写入，并在您打开另一个图库时立即保存，而不仅仅在退出时。在退出时如果",
+  "LightCraft 0.2.0 and older refuse it (\"unsupported format … v2\").": "LightCraft 0.2.0 及更早版本会拒绝它（“不支持的格式 … v2”）。",
+  "LightCraft no longer crashes at launch on Windows PCs whose Vulkan driver is broken (issue #136, e.g. some Intel UHD": "LightCraft 不再在 Vulkan 驱动损坏的 Windows 电脑上启动时崩溃（问题 #136，例如某些 Intel UHD",
+  "longer just says \"duplicate skipped\": it opens the side panel on Recently Deleted with the photo selected and says": "不再只是提示“已跳过重复项”：它会打开“最近删除”的侧边面板并选中该照片，然后说明",
+  "Lossy DNG files and Smart Previews open as raw photos.": "有损 DNG 文件和智能预览会以 RAW 照片形式打开。",
+  "lost everything at quit; a temporary session shows a banner the whole time and never writes to your library.": "退出时会丢失所有内容；临时会话会一直显示横幅，并且绝不会写入您的图库。",
+  "Luminar looks: `.lmp` files and `.mplumpack` collections import as presets (grouped by collection); the sliders": "Luminar 风格：`.lmp` 文件和 `.mplumpack` 合集可作为预设导入（按合集分组）；滑块",
+  "memory, exceeds the GPU's buffer limits, hits a driver error or reset, or comes back": "内存、超出 GPU 的缓冲区限制、遇到驱动错误或重置，或者恢复",
+  "message, and the original is left byte for byte. Ordinary earlier exports are still overwritten when asked.": "消息，原图则逐字节保留。早前的普通导出在用户要求时仍会被覆盖。",
+  "mid-batch: the error lists them (old → new) and the library points at their new names (an undoable partial rename),": "批处理中途：错误会列出它们（旧名 → 新名），图库指向其新名称（可撤销的部分重命名），",
+  "models whose sensor starts on a green-blue row) no longer come out magenta (issue #85): the colour-filter": "传感器从绿蓝行开始的机型）不再偏洋红（问题 #85）：色彩滤镜",
+  "name (never replacing a file), and only then is the photo relinked or the raw copy removed — a failed write": "名称（绝不替换现有文件），然后才重新关联照片或移除 RAW 副本——写入失败时",
+  "never leaves a truncated file; the XMP sidecar of an \"Original\" export follows the \"If file exists\" choice too.": "绝不会留下截断的文件；“原始”导出的 XMP 附属文件也遵循“如果文件已存在”选项。",
+  "Nikon NEFs start from a colour and tone look fitted to the camera's own JPEG, as Sony ARWs do, instead of a muted,": "Nikon NEF 从与相机自带 JPEG 匹配的色彩和色调外观开始，如同 Sony ARW，而不是灰暗、",
+  "Nikon splits into two differently compressed halves still use the preview for now.)": "Nikon 分成两半、压缩方式不同的文件目前仍使用预览。）",
+  "now develop from the raw data instead of the camera's embedded JPEG, so a B&W or other picture style set in the": "现在从原始数据而非相机内嵌 JPEG 进行显影，因此相机中设置的黑白或其他照片风格",
+  "Photo menu. The filmstrip has the photo context menu too. Adding a file again that is in Recently Deleted no": "照片菜单。胶片条也具有照片右键菜单。再次添加已在“最近删除”中的文件时，不再",
+  "Photos in Recently Deleted can be restored from the app: right-click ▸ Restore (or Delete Permanently), also in the": "“最近删除”中的照片可以从应用中恢复：右键 → 恢复（或 永久删除），也位于",
+  "Photos); importing (also by drag and drop), Find Missing Photos, Build / Discard Smart Previews, the Rename preview,": "照片）；导入（也支持拖放）、“查找缺失的照片”、“构建/丢弃智能预览”、“重命名预览”、",
+  "preserving RAW editing & full-resolution export instead of using embedded JPEG previews.": "保留 RAW 编辑与全分辨率导出，而不使用内嵌的 JPEG 预览。",
+  "Quick Collection and target album (B in the grid), keyword sets (⌥1–⌥9), colour-label sets.": "快速收藏和目标相册（网格中按 B）、关键字组（⌥1–⌥9）、颜色标签组。",
+  "read in the wrong units.": "以错误的单位读取。",
+  "reading the card a third time (Move still compares byte for byte before it deletes a source); a file that changed": "第三次读取存储卡（移动仍会在删除源文件前逐字节比较）；已更改的文件",
+  "Rename Folder… and Move Folder To… (Local) can be undone and redone (issue #97): the folder moves back on disk with": "重命名文件夹… 和 移动文件夹到…（本地）可以撤销和重做（问题 #97）：文件夹会在磁盘上移回原位，连同",
+  "Rename Photos never overwrites another photo when only the letter case changes (issue #95): on case-sensitive": "“重命名照片”在仅更改字母大小写时绝不会覆盖另一张照片（问题 #95）：在大小写敏感",
+  "Rename Photos reports files it could not move back after a failure (issue #105), e.g. when a network share drops": "“重命名照片”会报告失败后无法移回的文件（问题 #105），例如网络共享断开时",
+  "renders and screenshots are still written to a temp file and renamed into place, but no longer forced to disk": "渲染结果和截图仍会写入临时文件并重命名到位，但不再强制刷入磁盘",
+  "Saving metadata to an XMP sidecar another application wrote no longer replaces it (issue #92): LightCraft merges its": "将元数据保存到其他应用写入的 XMP 附属文件时，不再替换该文件（问题 #92）：LightCraft 会将其",
+  "scene) now develop from their sensor data with every editing tool, like the camera's other raws. Photos": "场景）现在可以使用所有编辑工具从其传感器数据进行显影，如同相机的其他 RAW 文件。照片",
+  "Settings files are never quietly reset (issue #103): a damaged `prefs.json`, `presets.json` or `view.json` is kept": "设置文件绝不会被静默重置（问题 #103）：损坏的 `prefs.json`、`presets.json` 或 `view.json` 会被保留",
+  "siblings) no longer open bright green (issue #148): their as-shot white balance and black level are read from the": "同类文件）不再显示亮绿色（问题 #148）：其拍摄时的白平衡和黑电平会从",
+  "sidecar that isn't valid XMP is copied to `<name>.xmp.bak-<time>` first. With the default stem naming, a raw and a": "不是有效 XMP 的附属文件会先复制为 `<name>.xmp.bak-<时间>`。使用默认的主干命名时，RAW 和",
+  "Slideshow, second window, All Metadata, System Info.": "幻灯片放映、第二窗口、全部元数据、系统信息。",
+  "Smaller, faster catalogs: photos you only looked at in Local (never added, rated or edited) are forgotten once": "更小、更快的目录：您仅在“本地”中查看过（从未添加、评分或编辑）的照片，一旦",
+  "Smart albums with a rule editor: match all / any / none, nested groups, 26 fields.": "带规则编辑器的智能相册：匹配全部/任一/无、嵌套组、26 个字段。",
+  "so none shows as missing. Renaming one of a raw + JPEG pair copies their shared `IMG_0001.xmp` instead of taking": "因此不会有任何照片显示为缺失。重命名 RAW + JPEG 组合中的一张时，会复制它们共用的 `IMG_0001.xmp`，而不是拿走",
+  "Sony ARWs from before about 2017 (RX100, RX100 II–V, RX10, NEX, SLT, ILCE-6000, A7 / A7 II / A7R II and their": "约 2017 年之前的 Sony ARW（RX100、RX100 II–V、RX10、NEX、SLT、ILCE-6000、A7 / A7 II / A7R II 及其",
+  "Sony ILCE-7M4 downsized lossless ARWs now decode subsampled YCbCr tiles into linear RGB,": "Sony ILCE-7M4 缩小尺寸的无损 ARW 现在可将子采样 YCbCr 块解码为线性 RGB，",
+  "starting the GPU, the next launch starts with GPU rendering off and says how to turn it back on.": "启动 GPU 时，下次启动将以 GPU 渲染关闭状态开始，并说明如何重新开启。",
+  "still saves your queued changes in the closing snapshot.": "仍会将您排队的更改保存到关闭快照中。",
+  "synced. Import ▸ Copy now checks each copy against the content hash taken while scanning the card instead of": "同步。导入 → 复制 现在会根据扫描存储卡时取得的内容哈希校验每一份副本，而不是",
+  "the camera; mapped-out sensor defects are filled in. `.rwl` and `.raw` files are imported too. Photos already": "相机；已标记的传感器缺陷会被填充。`.rwl` 和 `.raw` 文件也可导入。已",
+  "The catalog has a format version (issue #102). Opening a library from an older LightCraft upgrades it; a library": "目录具有格式版本（问题 #102）。打开旧版 LightCraft 创建的图库会自动升级；由",
+  "The control port (`--control`) closes a connection as soon as it receives anything that isn't a JSON request": "控制端口（`--control`）在收到任何非 JSON 请求的内容时，会立即关闭连接",
+  "the JPEG uses `IMG_0001.JPG.xmp`.": "JPEG 则使用 `IMG_0001.JPG.xmp`。",
+  "the Local folder tree and Auto Import read the disk on worker threads too. The import progress window has Cancel.": "“本地”文件夹树和自动导入也在工作线程上读取磁盘。导入进度窗口提供“取消”按钮。",
+  "the Photo menu and the photo context menu) picks up the full-size preview and fills in the camera metadata they": "照片菜单和照片右键菜单）会获取全尺寸预览，并补全相机元数据",
+  "the same name and \"Overwrite\" (or Export with Previous repeating it), an exact output path from the control": "同名且使用“覆盖”（或“使用上次设置导出”重复执行）时，来自控制",
+  "The thumbnail cache only ever counts and deletes its own files (issue #98): a library opened on a folder that": "缩略图缓存只会统计和删除自己的文件（问题 #98）：在包含",
+  "their folder has not been browsed for 30 days — your files and sidecars stay, and browsing the folder shows them": "其所在文件夹 30 天未被浏览——您的文件和附属文件会保留，浏览该文件夹时会重新显示它们",
+  "to the camera's own JPEG.": "与相机自带的 JPEG 相匹配。",
+  "TZ/ZS series, Leica D-Lux, V-Lux and C-Lux, and the GH6, GH7, G9 II, S5 II and S9 generation. They start from a": "TZ/ZS 系列、Leica D-Lux、V-Lux 和 C-Lux，以及 GH6、GH7、G9 II、S5 II 和 S9 一代。它们从",
+  "untouched — older versions no longer read part of it as a damaged log. Once this version has opened a library,": "保持不变——旧版本不再将其部分内容读取为损坏的日志。一旦此版本打开过某个图库，",
+  "used (e.g. a skipped software adapter such as llvmpipe) and why the last render fell back.": "使用的后端（例如被跳过的软件适配器，如 llvmpipe），以及上次渲染为何回退。",
+  "volumes (Linux, case-sensitive APFS) `img_1.JPG` next to `IMG_1.JPG` is a different photo and the renamed one gets": "卷（Linux、大小写敏感的 APFS）上，`img_1.JPG` 与 `IMG_1.JPG` 是不同照片，重命名后的照片会得到",
+  "Watched-folder auto import; Convert to DNG; Duplicate; Build Standard / 1:1 / Smart Previews.": "监视文件夹自动导入；转换为 DNG；复制；构建标准 / 1:1 / 智能预览。",
+  "were missing, without touching anything already set.": "缺失的内容，而不改动任何已设置的项目。",
+  "when the browser may evict the library. Hosting: the sample cache headers no longer mark the (unhashed) files": "浏览器可能驱逐图库时。托管：示例缓存头不再将（未哈希的）文件标记为",
+  "whether originals are there is checked on a worker thread (grid thumbnails, the Info panel, the photo menu, Missing": "原图是否存在会在工作线程上检查（网格缩略图、信息面板、照片菜单、“缺失",
+  "with a counterpart here come along, the rest is listed.": "在这里有对应项的一同导入，其余部分会列出。",
+  "Without Saving and Quit (issue #100). It no longer quietly starts a demo session that looked like a reset library and": "不保存并退出（问题 #100）。它不再静默启动一个看似已重置图库的演示会话，",
+  "written by a newer LightCraft is refused with \"this library was written by a newer version of LightCraft\" and left": "由更新版本 LightCraft 写入的目录会被拒绝，提示“此图库由更新版本的 LightCraft 写入”，并保持",
+  "written by a newer LightCraft), LightCraft says so and why, and offers Try Again, Choose Another Library…, Continue": "由更新版本 LightCraft 写入），LightCraft 会说明情况和原因，并提供 重试、选择其他图库…、继续",
+  "⌘-drag to straighten, ⇧G Guided Upright, a grid while transforming.": "⌘-拖拽进行拉直，⇧G 引导式垂直校正，变换时显示网格。",
+  "on the card after Review Import is reported instead of being imported with stale details. Checking an export path": "在“审阅导入”后在存储卡上发生的更改会被报告，而不会以过时信息导入。检查导出路径",
+  "one by one — they can always be exported again, and on a USB drive or a NAS that per-file sync dominated a large": "逐个进行——它们随时可以重新导出，而在 USB 硬盘或 NAS 上，逐文件同步曾占用了大量",
+  "over a same-name same-size look-alike, and skips (and reports) photos it can't tell apart instead of guessing.": "而不是同名同大小的相似文件，并且会跳过（并报告）无法区分的照片，而不是猜测。",
+  "Panasonic and Leica raws (RW2, RWL and the older RAW files, DMC-LX1 to DC-S1R II) develop from the raw data in": "Panasonic 和 Leica 的 RAW 文件（RW2、RWL 及更早的 RAW 文件，DMC-LX1 至 DC-S1R II）在",
+  "part out), or type what to select (\"sky\", \"the red car\", \"car, road\"); both combine with other masks, have an": "部分选中），或输入要选择的内容（“天空”、“红色汽车”、“汽车、道路”）；两者都可与其他蒙版组合，并具有"
 }