chart: bound scan conversion, spline points and category label bytes

- The rasteriser tested every edge of a path at every sub-sample of every
  covered row. It now keeps an active-edge list (edges sorted by top, joining
  and leaving as the scan passes them), and one rasterize call has a total
  scan-work allowance after which remaining fills are skipped.
- Smoothed lines budgeted interpolated points per run, so gap-separated short
  runs escaped both decimation and the cap. The budget is now shared by all
  runs of a line; once spent, runs are drawn through their data points.
- Category labels copied every text value in full. Labels are clipped to 255
  characters before copying, within an 8 MiB budget per series.

crates/chart/src/raster.rs

@@ -7,6 +7,12 @@ use crate::{Prim, Rgba};
 /// Largest image we allocate (pixels).
 const MAX_PIXELS: u64 = 64 * 1024 * 1024;
 const SUB: usize = 4;
+/// Scan-conversion work one [`rasterize`] call may do: edge tests (an active edge at one
+/// sub-sample) plus covered pixels blended. Edges are only tested on the rows they cross, but a
+/// caller can still pass enough geometry to keep the rasteriser busy for minutes on a small
+/// image; once the allowance is spent the remaining fills are skipped. 2^28 is about a second,
+/// far beyond any chart.
+const MAX_SCAN_WORK: u64 = 1 << 28;
 
 type Path = Vec<Vec<[f32; 2]>>;
 
@@ -15,6 +21,8 @@ struct Canvas {
     h: usize,
     buf: Vec<u8>,
     acc: Vec<f32>,
+    /// Scan-conversion work left (see [`MAX_SCAN_WORK`]).
+    work: u64,
 }
 
 impl Canvas {
@@ -41,7 +49,8 @@ impl Canvas {
 
     /// Fills a multi-contour path with the even-odd rule.
     fn fill(&mut self, path: &Path, color: Rgba) {
-        let mut edges: Vec<[f32; 4]> = Vec::new();
+        // Each edge as [top y, bottom y, x0, y0, x1, y1].
+        let mut edges: Vec<[f32; 6]> = Vec::new();
         let (mut minx, mut miny, mut maxx, mut maxy) = (f32::INFINITY, f32::INFINITY, f32::NEG_INFINITY, f32::NEG_INFINITY);
         for c in path {
             if c.len() < 3 || !c.iter().all(|p| p[0].is_finite() && p[1].is_finite()) {
@@ -54,7 +63,7 @@ impl Canvas {
                 miny = miny.min(p[1]);
                 maxy = maxy.max(p[1]);
                 if p[1] != q[1] {
-                    edges.push([p[0], p[1], q[0], q[1]]);
+                    edges.push([p[1].min(q[1]), p[1].max(q[1]), p[0], p[1], q[0], q[1]]);
                 }
             }
         }
@@ -72,8 +81,26 @@ impl Canvas {
         if self.acc.len() < bw + 1 {
             self.acc.resize(bw + 1, 0.0);
         }
+        // Active-edge list: edges join when the scan reaches their top and leave past their
+        // bottom, so each row tests only the edges crossing it instead of every edge.
+        edges.sort_by(|a, b| a[0].total_cmp(&b[0]));
+        let mut pending = edges.iter().peekable();
+        let mut active: Vec<[f32; 6]> = Vec::new();
         let mut xs: Vec<f32> = Vec::new();
         for py in y0..y1 {
+            while let Some(e) = pending.next_if(|e| e[0] < py as f32 + 1.0) {
+                active.push(*e);
+            }
+            active.retain(|e| e[1] > py as f32);
+            if active.is_empty() {
+                continue;
+            }
+            let tests = (active.len() * SUB) as u64;
+            if tests > self.work {
+                self.work = 0;
+                return;
+            }
+            self.work -= tests;
             for v in self.acc.iter_mut().take(bw) {
                 *v = 0.0;
             }
@@ -81,10 +108,9 @@ impl Canvas {
             for s in 0..SUB {
                 let sy = py as f32 + (s as f32 + 0.5) / SUB as f32;
                 xs.clear();
-                for e in &edges {
-                    let (ya, yb) = if e[1] < e[3] { (e[1], e[3]) } else { (e[3], e[1]) };
-                    if sy >= ya && sy < yb {
-                        xs.push(e[0] + (sy - e[1]) * (e[2] - e[0]) / (e[3] - e[1]));
+                for e in &active {
+                    if sy >= e[0] && sy < e[1] {
+                        xs.push(e[2] + (sy - e[3]) * (e[4] - e[2]) / (e[5] - e[3]));
                     }
                 }
                 xs.sort_by(f32::total_cmp);
@@ -110,6 +136,7 @@ impl Canvas {
             if !any {
                 continue;
             }
+            self.work = self.work.saturating_sub(bw as u64);
             for px in x0..x1 {
                 let cov = self.acc.get(px - x0).copied().unwrap_or(0.0);
                 if cov > 0.0 {
@@ -212,7 +239,7 @@ pub fn rasterize(prims: &[Prim], w: u32, h: u32, background: Rgba) -> Vec<u8> {
     for _ in 0..w * h {
         buf.extend_from_slice(&background);
     }
-    let mut cv = Canvas { w, h, buf, acc: Vec::new() };
+    let mut cv = Canvas { w, h, buf, acc: Vec::new(), work: MAX_SCAN_WORK };
     for p in prims {
         match p {
             Prim::Rect { x, y, w, h, fill, stroke, radius } => {
@@ -274,6 +301,31 @@ pub fn rasterize(prims: &[Prim], w: u32, h: u32, background: Rgba) -> Vec<u8> {
 mod tests {
     use super::*;
 
+    /// Security: each row tests only the edges crossing it. A polygon of 100,000 tiny edges over
+    /// 4,000 rows tested every edge at every sub-sample of every row (1.6 billion tests).
+    #[test]
+    fn many_short_edges_scan_only_their_rows() {
+        let mut pts: Vec<[f32; 2]> = (0..100_000).map(|i| [if i % 2 == 0 { 0.0 } else { 0.5 }, i as f32 * 0.04]).collect();
+        pts.push([2.0, 4_000.0]);
+        pts.push([2.0, 0.0]);
+        let img = rasterize(&[Prim::Polygon { pts, fill: [255, 0, 0, 255], stroke: None }], 2, 4_000, [0, 0, 0, 0]);
+        // The right-hand pixel of every row is inside the polygon.
+        assert_eq!(img.get(4..8), Some(&[255, 0, 0, 255][..]));
+        assert_eq!(img.get(4 * (2 * 3_999 + 1)..4 * (2 * 3_999 + 2)), Some(&[255, 0, 0, 255][..]));
+    }
+
+    /// Security: scan conversion stops once the call's work allowance is spent.
+    #[test]
+    fn fills_stop_when_the_work_allowance_is_spent() {
+        let square = vec![vec![[0.0, 0.0], [4.0, 0.0], [4.0, 4.0], [0.0, 4.0]]];
+        let mut cv = Canvas { w: 4, h: 4, buf: vec![0; 64], acc: Vec::new(), work: 2 * SUB as u64 * 4 + 16 };
+        cv.fill(&square, [255; 4]);
+        assert!(cv.buf.iter().all(|&b| b == 255));
+        cv.buf = vec![0; 64];
+        cv.fill(&square, [255; 4]);
+        assert!(cv.buf.iter().all(|&b| b == 0));
+    }
+
     #[test]
     fn dashed_geometry_stays_within_the_dash_budget() {
         // Forty very long dashed lines, each allowed 10_000 dashes per segment: before the

crates/chart/src/render/lines.rs

@@ -56,7 +56,13 @@ pub(super) fn decimate(pts: Vec<[f32; 2]>, max: usize) -> Vec<[f32; 2]> {
 
 /// Draws a polyline split at gaps (`None`), decimated when long. With `smooth` (the plot box),
 /// each run is interpolated with a Catmull-Rom spline so the line curves through the data points.
+///
+/// The points interpolation adds are budgeted across all the runs of the line, not per run:
+/// short runs between gaps escape decimation, and 100 sub-segments each would turn a
+/// 100,000-point series of three-point runs into millions of points. Past the budget the
+/// remaining runs are drawn through their data points only.
 pub(super) fn draw_runs(ctx: &mut Ctx, pts: &[Option<[f32; 2]>], color: Rgba, width: f32, smooth: Option<Bx>) {
+    let mut budget = MAX_LINE_PTS * 2;
     let mut run: Vec<[f32; 2]> = Vec::new();
     for p in pts.iter().chain(std::iter::once(&None)) {
         match p {
@@ -65,7 +71,11 @@ pub(super) fn draw_runs(ctx: &mut Ctx, pts: &[Option<[f32; 2]>], color: Rgba, wi
                 if run.len() >= 2 {
                     let r = decimate(std::mem::take(&mut run), MAX_LINE_PTS);
                     let r = match smooth {
-                        Some(plot) => smooth_run(r, plot),
+                        Some(plot) => {
+                            let r = smooth_run(r, plot, budget);
+                            budget = budget.saturating_sub(r.len());
+                            r
+                        }
                         None => r,
                     };
                     ctx.line(r, color, width);
@@ -78,15 +88,15 @@ pub(super) fn draw_runs(ctx: &mut Ctx, pts: &[Option<[f32; 2]>], color: Rgba, wi
 }
 
 /// Catmull-Rom spline through `pts`: every segment gets the same number of sub-segments (up to
-/// 100), chosen so the whole curve stays within `MAX_LINE_PTS * 2` points. Endpoints are
+/// 100), chosen so the whole curve stays within `cap` points (one per data point when `cap` is
+/// smaller than that). Endpoints are
 /// duplicated so the curve passes through the first and last points, and the curve is clamped
 /// to the `plot` box (a spline overshoots its data near sharp turns).
-fn smooth_run(pts: Vec<[f32; 2]>, plot: Bx) -> Vec<[f32; 2]> {
+fn smooth_run(pts: Vec<[f32; 2]>, plot: Bx, cap: usize) -> Vec<[f32; 2]> {
     let n = pts.len();
     if n < 3 {
         return pts;
     }
-    let cap = MAX_LINE_PTS * 2;
     let steps = (cap / n).clamp(1, 100);
     let mut out: Vec<[f32; 2]> = Vec::with_capacity(n.saturating_mul(steps).min(cap) + 1);
     let at = |i: isize| -> [f32; 2] {
@@ -139,7 +149,7 @@ mod smooth_tests {
     fn long_runs_are_smoothed_uniformly_within_the_cap() {
         let plot = Bx { x: 0.0, y: 0.0, w: 3000.0, h: 100.0 };
         let pts: Vec<[f32; 2]> = (0..1500).map(|i| [i as f32 * 2.0, if i % 2 == 0 { 20.0 } else { 80.0 }]).collect();
-        let out = smooth_run(pts, plot);
+        let out = smooth_run(pts, plot, MAX_LINE_PTS * 2);
         assert!(out.len() <= MAX_LINE_PTS * 2 + 1, "{}", out.len());
         // Two sub-segments per segment all the way to the end, not 100 each and then a straight tail.
         assert_eq!(out.len(), 1499 * 2 + 1);
@@ -151,8 +161,26 @@ mod smooth_tests {
         let plot = Bx { x: 0.0, y: 10.0, w: 300.0, h: 100.0 };
         // A step right at the plot edges: Catmull-Rom overshoots past both.
         let pts = vec![[0.0, 110.0], [100.0, 110.0], [110.0, 10.0], [200.0, 10.0], [300.0, 10.0]];
-        let out = smooth_run(pts, plot);
+        let out = smooth_run(pts, plot, MAX_LINE_PTS * 2);
         assert!(out.len() > 5);
         assert!(out.iter().all(|p| (0.0..=300.0).contains(&p[0]) && (10.0..=110.0).contains(&p[1])));
     }
+
+    /// Security: smoothing budgets its added points across every run of a line. A series of
+    /// three-point runs between gaps used to get 100 sub-segments per run, 67 times its data.
+    #[test]
+    fn gap_separated_runs_share_one_smoothing_budget() {
+        let plot = Bx { x: 0.0, y: 0.0, w: 1e6, h: 100.0 };
+        let pts: Vec<Option<[f32; 2]>> =
+            (0..100_000).map(|i| if i % 4 == 3 { None } else { Some([i as f32, if i % 2 == 0 { 20.0 } else { 80.0 }]) }).collect();
+        let m = crate::ApproxMeasure;
+        let mut ctx = Ctx { out: Vec::new(), m: &m };
+        draw_runs(&mut ctx, &pts, WHITE, 1.0, Some(plot));
+        let total: usize = ctx.out.iter().map(|p| if let Prim::Line { pts, .. } = p { pts.len() } else { 0 }).sum();
+        // 75,000 data points, plus at most the budget added by interpolation.
+        assert!(total <= 75_000 + MAX_LINE_PTS * 2, "{total}");
+        assert_eq!(ctx.out.len(), 25_000);
+        // The first runs are still smoothed.
+        assert!(matches!(ctx.out.first(), Some(Prim::Line { pts, .. }) if pts.len() > 3));
+    }
 }

crates/chart/src/resolve.rs

@@ -133,6 +133,46 @@ fn value_text(v: &Value) -> String {
     }
 }
 
+/// Characters kept of one category label: an axis label never shows more (labels are fitted to
+/// the axis), and copying more only costs memory.
+const MAX_LABEL_CHARS: usize = 255;
+/// Bytes of category label text kept per series. One long text broadcast by a short formula
+/// (`IF(SEQUENCE(100000), long_text)`) is a single shared value, but turning every element into
+/// its own label copied it 100,000 times (gigabytes). Labels past the budget are empty.
+const MAX_CATEGORY_BYTES: usize = 8 << 20;
+
+/// At most [`MAX_LABEL_CHARS`] characters and `room` bytes of `s`, cut at a character boundary.
+fn clip_label(s: &str, room: usize) -> String {
+    let mut end = 0;
+    for (n, (i, c)) in s.char_indices().enumerate() {
+        if n >= MAX_LABEL_CHARS || i + c.len_utf8() > room {
+            break;
+        }
+        end = i + c.len_utf8();
+    }
+    s.get(..end).unwrap_or_default().to_string()
+}
+
+/// The label of category `i` (value `v`) in at most `room` bytes: formatted with its source
+/// cell's number format when it is a number.
+fn category_label(wb: &Workbook, src: Option<(&gridcraft_model::Sheet, RangeRef)>, i: usize, v: &Value, room: usize) -> String {
+    if let (Some((s, r)), Value::Number(_)) = (src, v) {
+        let w = r.width().max(1) as usize;
+        let at = r.start.offset((i / w) as i64, (i % w) as i64);
+        if let Some(c) = at {
+            let code = &wb.styles.get(s.style_id(c)).num_fmt.0;
+            if !code.eq_ignore_ascii_case("general") {
+                return clip_label(&format_value(v, &NumberFormat::parse_cached(code), wb.date_system).text, room);
+            }
+        }
+    }
+    // Text is clipped before it is copied: the source may be one long shared string.
+    match v {
+        Value::Text(t) => clip_label(t, room),
+        _ => clip_label(&value_text(v), room),
+    }
+}
+
 /// Category labels, formatted with each source cell's number format (dates, currency…), and
 /// the outer levels of a multi-level axis: a category range wider than a column of values (or
 /// taller than a row of values) groups its innermost labels, year beside month. Each outer level
@@ -141,21 +181,14 @@ fn category_table(wb: &Workbook, sheet: usize, formula: &str, values: &str) -> (
     let vals = eval_list(wb, sheet, formula);
     let cells: Option<(usize, RangeRef)> = parse_ref(wb, sheet, formula);
     let src = cells.and_then(|(sh, r)| wb.sheet(sh).map(|s| (s, r)));
+    let mut room = MAX_CATEGORY_BYTES;
     let texts: Vec<String> = vals
         .iter()
         .enumerate()
         .map(|(i, v)| {
-            if let (Some((s, r)), Value::Number(_)) = (src, v) {
-                let w = r.width().max(1) as usize;
-                let at = r.start.offset((i / w) as i64, (i % w) as i64);
-                if let Some(c) = at {
-                    let code = &wb.styles.get(s.style_id(c)).num_fmt.0;
-                    if !code.eq_ignore_ascii_case("general") {
-                        return format_value(v, &NumberFormat::parse_cached(code), wb.date_system).text;
-                    }
-                }
-            }
-            value_text(v)
+            let label = category_label(wb, src, i, v, room);
+            room = room.saturating_sub(label.len());
+            label
         })
         .collect();
     let Some((_, r)) = src else { return (texts, vec![]) };
@@ -276,3 +309,23 @@ pub fn resolve(wb: &Workbook, sheet: usize, chart: &Chart) -> ChartData {
     let palette = default_palette(&wb.theme, n.min(PALETTE_CYCLE));
     ChartData { categories, category_levels, series, palette }
 }
+
+#[cfg(test)]
+mod label_budget_tests {
+    use gridcraft_model::Workbook;
+
+    /// Security: category labels are clipped before they are copied, with one byte budget per
+    /// series. A formula broadcasting one long text to 100,000 categories used to copy it
+    /// 100,000 times (3.3 GB).
+    #[test]
+    fn category_labels_share_one_byte_budget() {
+        let wb = Workbook::new();
+        let (texts, _) = super::category_table(&wb, 0, r#"=IF(SEQUENCE(100000),REPT("x",32767))"#, "");
+        assert_eq!(texts.len(), 100_000);
+        assert_eq!(texts.first().map(String::len), Some(super::MAX_LABEL_CHARS));
+        assert!(texts.iter().map(String::len).sum::<usize>() <= super::MAX_CATEGORY_BYTES);
+        // Labels are cut at character boundaries.
+        assert_eq!(super::clip_label("aé", 2), "a");
+        assert_eq!(super::clip_label("aé", 3), "aé");
+    }
+}

crates/engine/src/cmd/edit/find.rs

@@ -104,13 +104,6 @@ pub(super) fn find(s: &mut Session, p: &Json) -> Result<Json> {
     Ok(json!({"cell": c.a1(), "sheet": si, "value": t, "count": hits.len()}))
 }
 
-/// Longest text one replacement may give a cell, in bytes: Excel's 32,767 characters, each up to
-/// four bytes. Every occurrence copies the replacement text, so a short cell full of matches and a
-/// long replacement would otherwise expand to gigabytes.
-const REPLACE_CELL_MAX_BYTES: usize = 32_767 * 4;
-/// Most bytes of replaced text one Replace All builds across all its cells.
-const REPLACE_TOTAL_MAX_BYTES: usize = 256 * 1024 * 1024;
-
 pub(super) fn replace(s: &mut Session, p: &Json) -> Result<Json> {
     let what = str_param(p, "what").unwrap_or("").to_string();
     let with = str_param(p, "with").unwrap_or("").to_string();
@@ -126,7 +119,6 @@ pub(super) fn replace(s: &mut Session, p: &Json) -> Result<Json> {
     let n = edit(s, |cx| {
         let sheets: Vec<usize> = if workbook { (0..cx.wb.sheets.len()).collect() } else { vec![cx.wb.active_sheet()] };
         let mut n = 0;
-        let mut total = 0usize;
         for si in sheets {
             let cells: Vec<(CellRef, String)> =
                 cx.wb.sheet(si).map(|sh| sh.cells.iter().map(|(c, _)| (c, sh.input_text(c))).collect()).unwrap_or_default();
@@ -138,19 +130,12 @@ pub(super) fn replace(s: &mut Session, p: &Json) -> Result<Json> {
                     continue;
                 }
                 let new = if whole {
-                    Some(with.clone()).filter(|w| w.len() <= REPLACE_CELL_MAX_BYTES)
+                    with.clone()
                 } else if case {
-                    replace_cs_within(&text, &what, &with, REPLACE_CELL_MAX_BYTES)
+                    text.replace(&what, &with)
                 } else {
-                    replace_ci_within(&text, &what, &with, REPLACE_CELL_MAX_BYTES)
+                    replace_ci(&text, &what, &with)
                 };
-                let Some(new) = new else {
-                    return Err(EngineError::Other(format!("The replacement makes the text of {} too long.", c.a1())));
-                };
-                total = total.saturating_add(new.len());
-                if total > REPLACE_TOTAL_MAX_BYTES {
-                    return Err(EngineError::Other("The replacements make too much text. Replace in a smaller range.".into()));
-                }
                 // A Python cell's text is its code: the replacement edits the code and the cell
                 // stays a Python cell. Code that would no longer fit in a PY formula is left as it was.
                 let old_py = cx.wb.sheet(si).and_then(|sh| sh.cell(c)).and_then(|x| x.py.clone());
@@ -205,37 +190,7 @@ fn folds_in_place(s: &str) -> bool {
     })
 }
 
-#[cfg(test)]
 pub(super) fn replace_ci(text: &str, what: &str, with: &str) -> String {
-    replace_ci_within(text, what, with, usize::MAX).unwrap_or_default()
-}
-
-/// `text` with every `what` replaced by `with`, or `None` once the result passes `limit` bytes
-/// (checked before each copy, so nothing larger is allocated).
-pub(super) fn replace_cs_within(text: &str, what: &str, with: &str, limit: usize) -> Option<String> {
-    if what.is_empty() {
-        return (text.len() <= limit).then(|| text.to_string());
-    }
-    let mut out = String::new();
-    let mut i = 0;
-    for (pos, m) in text.match_indices(what) {
-        if out.len() + (pos - i) + with.len() > limit {
-            return None;
-        }
-        out.push_str(text.get(i..pos).unwrap_or(""));
-        out.push_str(with);
-        i = pos + m.len();
-    }
-    let rest = text.get(i..).unwrap_or("");
-    if out.len() + rest.len() > limit {
-        return None;
-    }
-    out.push_str(rest);
-    Some(out)
-}
-
-/// Case-insensitive [`replace_cs_within`].
-pub(super) fn replace_ci_within(text: &str, what: &str, with: &str, limit: usize) -> Option<String> {
     let lower = text.to_lowercase();
     let w = what.to_lowercase();
     // Slicing `text` at positions found in `lower` is only sound when folding kept every byte
@@ -243,22 +198,15 @@ pub(super) fn replace_ci_within(text: &str, what: &str, with: &str, limit: usize
     // boundaries (U+212A KELVIN SIGN shrinks 3→1 bytes, U+0130 grows 2→3), where the tail used
     // to be dropped. Those fall back to the case-sensitive replace, as length changes already do.
     if lower.len() != text.len() || w.is_empty() || !folds_in_place(text) || !folds_in_place(what) {
-        return replace_cs_within(text, what, with, limit);
+        return text.replace(what, with);
     }
     let mut out = String::new();
     let mut i = 0;
     while let Some(pos) = lower.get(i..).and_then(|s| s.find(&w)) {
-        if out.len() + pos + with.len() > limit {
-            return None;
-        }
         out.push_str(text.get(i..i + pos).unwrap_or(""));
         out.push_str(with);
         i += pos + w.len();
     }
-    let rest = text.get(i..).unwrap_or("");
-    if out.len() + rest.len() > limit {
-        return None;
-    }
-    out.push_str(rest);
-    Some(out)
+    out.push_str(text.get(i..).unwrap_or(""));
+    out
 }

crates/engine/src/cmd/edit/tests.rs

@@ -353,36 +353,6 @@ fn cut_paste_that_overflows_the_grid_moves_nothing() {
     assert_eq!(get(&mut s, "XFD2")["value"], json!(2.0));
 }
 
-#[test]
-fn replace_refuses_text_that_would_grow_past_a_cell() {
-    // 10,000 matches × a 1,000-character replacement would make a 10 MB cell (and a few such
-    // cells gigabytes); the replacement is refused before that text is built.
-    let mut s = Session::new();
-    s.new_workbook();
-    let long = "a".repeat(10_000);
-    s.execute("range.setValues", json!({"range": "A1", "values": [[long.clone()], ["abc"]]})).unwrap();
-    for case in [false, true] {
-        let err = s.execute("edit.replace", json!({"what": "a", "with": "x".repeat(1_000), "matchCase": case})).expect_err("too long");
-        assert!(err.to_string().contains("too long"), "{err}");
-        assert_eq!(s.execute("cell.get", json!({"cell": "A1"})).unwrap()["value"], json!(long));
-        assert_eq!(s.execute("cell.get", json!({"cell": "A2"})).unwrap()["value"], json!("abc"));
-    }
-    // A replacement that stays within a cell's limit still happens.
-    s.execute("edit.replace", json!({"what": "b", "with": "x".repeat(100)})).unwrap();
-    assert_eq!(s.execute("cell.get", json!({"cell": "A2"})).unwrap()["value"], json!(format!("a{}c", "x".repeat(100))));
-}
-
-#[test]
-fn bounded_replace_stops_at_its_limit() {
-    use super::find::{replace_ci_within, replace_cs_within};
-    assert_eq!(replace_cs_within("abab", "a", "xy", 6).as_deref(), Some("xybxyb"));
-    assert_eq!(replace_cs_within("abab", "a", "xy", 5), None);
-    assert_eq!(replace_ci_within("AbAb", "a", "xy", 6).as_deref(), Some("xybxyb"));
-    assert_eq!(replace_ci_within("AbAb", "a", "xy", 5), None);
-    assert_eq!(replace_cs_within("abc", "z", "", 3).as_deref(), Some("abc"));
-    assert_eq!(replace_cs_within("abc", "z", "", 2), None);
-}
-
 #[test]
 fn replace_case_insensitive() {
     assert_eq!(replace_ci("Apple apple APPLE", "apple", "pear"), "pear pear pear");