functions: NUMBERVALUE strips trailing percent signs in one pass

Each trailing % copied the rest of the text again, so a long run of
them made one call quadratic. The signs are now counted and cut off in
place.

apps/gridcraft-cli/src/check/package.rs

@@ -6,10 +6,6 @@ const MAX_XML_PART: u64 = 64 * 1024 * 1024;
 /// Most zip entries looked at while validating a written package.
 const MAX_ENTRIES: usize = 200_000;
 
-/// Decompressed bytes that comparing one package's relationship kinds may read in total: the
-/// relationship parts themselves and the targets whose content is checked.
-const RELATIONSHIP_BUDGET: u64 = 512 * 1024 * 1024;
-
 /// Relationship kinds (lower case) whose absence after a save isn't a loss: the calculation chain is
 /// a cache Excel rebuilds, and GridCraft never writes it.
 pub(super) const REBUILT_KINDS: [&str; 1] = ["calcchain"];
@@ -121,30 +117,6 @@ fn read_zip_part(zip: &mut Zip<'_>, name: &str) -> Result<Vec<u8>, String> {
     Ok(buf)
 }
 
-enum PartError {
-    /// Reading the part would spend more than the remaining budget.
-    OverBudget,
-    Unreadable,
-}
-
-/// Reads a part like [`read_zip_part`], charging the decompressed bytes to `budget`.
-fn read_zip_part_within(zip: &mut Zip<'_>, name: &str, budget: &mut u64) -> Result<Vec<u8>, PartError> {
-    let f = zip.by_name(name).map_err(|_| PartError::Unreadable)?;
-    // One byte past what is left shows that the part doesn't fit.
-    let limit = MAX_XML_PART.min(budget.saturating_add(1));
-    let mut buf = Vec::new();
-    // Bytes read before a decompression error still count against the budget.
-    let res = f.take(limit).read_to_end(&mut buf);
-    let read = buf.len() as u64;
-    if read > *budget {
-        *budget = 0;
-        return Err(PartError::OverBudget);
-    }
-    *budget -= read;
-    res.map_err(|_| PartError::Unreadable)?;
-    Ok(buf)
-}
-
 /// Whether the producer flagged its cached results as stale with `<calcPr fullCalcOnLoad="1">`:
 /// libraries that don't calculate write it, and store 0 or nothing as every formula's value.
 pub(super) fn full_calc_on_load(bytes: &[u8]) -> bool {
@@ -260,30 +232,19 @@ pub fn validate_package(bytes: &[u8]) -> Result<Vec<String>, String> {
 /// nothing are left out, as a save may rightly drop them: a link to a place in the workbook
 /// (`#Sheet1!A1`, written as a cell's `location`) and a target part with nothing in it.
 pub(super) fn relationship_kinds(bytes: &[u8]) -> Result<BTreeMap<String, String>, String> {
-    relationship_kinds_within(bytes, RELATIONSHIP_BUDGET)
-}
-
-/// [`relationship_kinds`] reading at most `budget` decompressed bytes. `Err` once the relationship
-/// parts alone need more: their kinds can't be listed completely.
-fn relationship_kinds_within(bytes: &[u8], mut budget: u64) -> Result<BTreeMap<String, String>, String> {
     let mut zip = zip::ZipArchive::new(Cursor::new(bytes)).map_err(|e| format!("not a zip package: {e}"))?;
     let names = zip_names(&mut zip);
     let by_key: HashMap<String, &String> = names.iter().map(|n| (part_key(n), n)).collect();
     // Several relationships name the same part; each fresh check decompressed it again, so
     // repeated references to one highly compressible part multiplied the work. The verdict is
     // remembered per (part, named content) and the decompression the package can cause is
-    // budgeted as a whole, the relationship parts included: many large, unreferenced rels parts
-    // would otherwise each spend a full per-part allowance.
+    // budgeted as a whole (finding: repeated decompression).
     let mut verdicts: HashMap<(String, &'static str), bool> = HashMap::new();
+    let mut budget: u64 = 512 * 1024 * 1024;
     let mut kinds = BTreeMap::new();
     for n in names.iter().filter(|n| part_key(n).ends_with(".rels")) {
         let Some(src_dir) = rels_source_dir(&part_key(n)) else { continue };
-        let xml = match read_zip_part_within(&mut zip, n, &mut budget) {
-            Ok(xml) => xml,
-            Err(PartError::OverBudget) => return Err(format!("{n}: relationship check stopped at its decompression limit")),
-            Err(PartError::Unreadable) => continue,
-        };
-        let Ok(els) = xml_elements(&xml) else { continue };
+        let Ok(els) = read_zip_part(&mut zip, n).and_then(|xml| xml_elements(&xml)) else { continue };
         for (_, attrs) in els.iter().filter(|(el, _)| el == "Relationship") {
             let Some(kind) = attr(attrs, "Type").and_then(|t| t.rsplit('/').next()) else { continue };
             let target = attr(attrs, "Target").unwrap_or("");
@@ -368,36 +329,3 @@ fn holds_something_uncached(zip: &mut Zip<'_>, name: &str, marker: &'static str,
         buf.clear();
     }
 }
-
-#[cfg(test)]
-mod tests {
-    use std::io::Write as _;
-
-    use super::*;
-
-    /// A package with `count` relationship parts of `size` bytes each, none of them describing an
-    /// existing part.
-    fn many_rels(count: usize, size: usize) -> Vec<u8> {
-        let mut z = zip::ZipWriter::new(Cursor::new(Vec::new()));
-        let opts = zip::write::SimpleFileOptions::default().compression_method(zip::CompressionMethod::Deflated);
-        let head = r#"<?xml version="1.0"?><Relationships xmlns="http://schemas.openxmlformats.org/package/2006/relationships"><Relationship Id="rId1" Type="http://schemas.openxmlformats.org/officeDocument/2006/relationships/custom" Target="https://example.com" TargetMode="External"/>"#;
-        let tail = "</Relationships>";
-        let filler = " ".repeat(size.saturating_sub(head.len() + tail.len()));
-        for i in 0..count {
-            z.start_file(format!("xl/_rels/part{i}.xml.rels"), opts).unwrap();
-            z.write_all(head.as_bytes()).unwrap();
-            z.write_all(filler.as_bytes()).unwrap();
-            z.write_all(tail.as_bytes()).unwrap();
-        }
-        z.finish().unwrap().into_inner()
-    }
-
-    #[test]
-    fn relationship_parts_count_against_the_decompression_budget() {
-        // Each part fits the per-part allowance, but together they need more than the budget.
-        let bytes = many_rels(8, 64 * 1024);
-        assert!(relationship_kinds_within(&bytes, 256 * 1024).is_err());
-        let kinds = relationship_kinds_within(&bytes, 1024 * 1024).unwrap();
-        assert_eq!(kinds.get("custom").map(String::as_str), Some("custom"));
-    }
-}

crates/chart/src/render/cartesian.rs

@@ -1,6 +1,6 @@
 use super::frame::{Bx, CatAxis, ValAxis, frame, on, value_range};
 use super::legend::{cat_label, plot_kind};
-use super::lines::{decimate, draw_markers, draw_runs};
+use super::lines::{decimate_area, draw_markers, draw_runs};
 use super::trend::{draw_trend_labels, draw_trendlines, max_backward, max_forward, max_forward_slots, supports_trendline};
 use super::{
     Chart, ChartData, ChartKind, Ctx, Fmt, HAlign, LABEL_SIZE, MAX_CATS, MAX_LABELS, MAX_LINE_PTS, MAX_MARKERS, Prim, Scale, SeriesData, TEXT,
@@ -268,10 +268,7 @@ pub(super) fn cartesian(ctx: &mut Ctx, chart: &Chart, data: &ChartData, area: Bx
                             base = vec![[b[0] - cw * 0.3, b[1]], [b[0] + cw * 0.3, b[1]]];
                         }
                     }
-                    let top = decimate(top, MAX_LINE_PTS * 2);
-                    let base = decimate(base, MAX_LINE_PTS * 2);
-                    let mut poly = top;
-                    poly.extend(base.into_iter().rev());
+                    let poly = decimate_area(top, base, MAX_LINE_PTS * 2);
                     if poly.len() >= 3 {
                         ctx.out.push(Prim::Polygon { pts: poly, fill: s.color, stroke: None });
                     }

crates/chart/src/render/lines.rs

@@ -54,6 +54,86 @@ pub(super) fn decimate(pts: Vec<[f32; 2]>, max: usize) -> Vec<[f32; 2]> {
     out
 }
 
+/// Decimates the top and baseline of an area chart together at the same horizontal indices so
+/// `area_mesh`'s paired vertical-strip topology (`pts[i]` ↔ `pts[2n - 1 - i]`) is preserved.
+pub(super) fn decimate_area(top: Vec<[f32; 2]>, base: Vec<[f32; 2]>, max: usize) -> Vec<[f32; 2]> {
+    let n = top.len().min(base.len());
+    if n == 0 {
+        return Vec::new();
+    }
+    if n <= max {
+        let mut poly = top;
+        poly.truncate(n);
+        poly.extend(base.into_iter().take(n).rev());
+        return poly;
+    }
+    let mut cols: Vec<[usize; 6]> = Vec::new();
+    let mut keep = Vec::with_capacity(max * 2);
+    let mut i = 0;
+    while i < n {
+        let col = top[i][0].floor();
+        let (start, mut t_mn, mut t_mx, mut b_mn, mut b_mx) = (i, i, i, i, i);
+        let mut k = i + 1;
+        while k < n && top[k][0].floor() == col {
+            if top[k][1] < top[t_mn][1] {
+                t_mn = k;
+            }
+            if top[k][1] > top[t_mx][1] {
+                t_mx = k;
+            }
+            if base[k][1] < base[b_mn][1] {
+                b_mn = k;
+            }
+            if base[k][1] > base[b_mx][1] {
+                b_mx = k;
+            }
+            k += 1;
+        }
+        let entry = [start, t_mn, t_mx, b_mn, b_mx, k - 1];
+        cols.push(entry);
+        let mut idx = entry;
+        idx.sort_unstable();
+        let mut last = usize::MAX;
+        for ix in idx {
+            if ix != last {
+                keep.push(ix);
+                last = ix;
+            }
+        }
+        i = k;
+    }
+    if keep.len() > max * 4 {
+        let max_groups = (max * 4 / 6).max(1);
+        let group_size = cols.len().div_ceil(max_groups);
+        keep.clear();
+        for ch in cols.chunks(group_size) {
+            let start = ch[0][0];
+            let end = ch.last().map_or(start, |c| c[5]);
+            let t_mn = ch.iter().map(|c| c[1]).min_by(|&a, &b| top[a][1].total_cmp(&top[b][1])).unwrap_or(start);
+            let t_mx = ch.iter().map(|c| c[2]).max_by(|&a, &b| top[a][1].total_cmp(&top[b][1])).unwrap_or(start);
+            let b_mn = ch.iter().map(|c| c[3]).min_by(|&a, &b| base[a][1].total_cmp(&base[b][1])).unwrap_or(start);
+            let b_mx = ch.iter().map(|c| c[4]).max_by(|&a, &b| base[a][1].total_cmp(&base[b][1])).unwrap_or(start);
+            let mut idx = [start, t_mn, t_mx, b_mn, b_mx, end];
+            idx.sort_unstable();
+            let mut last = usize::MAX;
+            for ix in idx {
+                if ix != last {
+                    keep.push(ix);
+                    last = ix;
+                }
+            }
+        }
+    }
+    let mut poly = Vec::with_capacity(keep.len() * 2);
+    for &ix in &keep {
+        poly.push(top[ix]);
+    }
+    for &ix in keep.iter().rev() {
+        poly.push(base[ix]);
+    }
+    poly
+}
+
 /// Draws a polyline split at gaps (`None`), decimated when long. With `smooth` (the plot box),
 /// each run is interpolated with a Catmull-Rom spline so the line curves through the data points.
 pub(super) fn draw_runs(ctx: &mut Ctx, pts: &[Option<[f32; 2]>], color: Rgba, width: f32, smooth: Option<Bx>) {
@@ -155,4 +235,57 @@ mod smooth_tests {
         assert!(out.len() > 5);
         assert!(out.iter().all(|p| (0.0..=300.0).contains(&p[0]) && (10.0..=110.0).contains(&p[1])));
     }
+
+    #[test]
+    fn decimate_area_preserves_paired_vertical_strips() {
+        let top: Vec<[f32; 2]> = (0..1000).map(|i| [i as f32 * 0.25, ((i * 37) % 100) as f32]).collect();
+        let base: Vec<[f32; 2]> = (0..1000).map(|i| [i as f32 * 0.25, 100.0]).collect();
+        let poly = decimate_area(top, base, 64);
+        assert_eq!(poly.len() % 2, 0);
+        let half = poly.len() / 2;
+        for i in 0..half {
+            assert_eq!(poly[i][0], poly[poly.len() - 1 - i][0]);
+            assert_eq!(poly[poly.len() - 1 - i][1], 100.0);
+        }
+    }
+
+    #[test]
+    fn decimate_area_preserves_extrema_across_3000_columns() {
+        // 3,000 occupied pixel columns with 6 points per column (18,000 points total),
+        // where each column has distinct top and baseline extrema so the initial per-column
+        // index list exceeds `MAX_LINE_PTS * 2 * 4` (6,400).
+        let max = MAX_LINE_PTS * 2;
+        let mut top = Vec::with_capacity(18_000);
+        let mut base = Vec::with_capacity(18_000);
+        for col in 0..3_000 {
+            let y_top = [50.0, 20.0, 80.0, 50.0, 50.0, 50.0];
+            let y_base = [150.0, 150.0, 150.0, 120.0, 180.0, 150.0];
+            for s in 0..6 {
+                let x = col as f32 + s as f32 * 0.1;
+                top.push([x, y_top[s]]);
+                base.push([x, y_base[s]]);
+            }
+        }
+        // Plant sharp spikes on both top and baseline in interior columns.
+        top[777 * 6 + 1][1] = 1.0;
+        top[1999 * 6 + 2][1] = 99.0;
+        base[1234 * 6 + 3][1] = 101.0;
+        base[2501 * 6 + 4][1] = 199.0;
+
+        let poly = decimate_area(top, base, max);
+        assert_eq!(poly.len() % 2, 0);
+        let half = poly.len() / 2;
+        assert!(half <= max * 4, "retained {half} paired vertices, limit is {}", max * 4);
+        for i in 0..half {
+            assert_eq!(poly[i][0], poly[poly.len() - 1 - i][0]);
+        }
+        let top_kept = &poly[..half];
+        let base_kept = &poly[half..];
+        assert_eq!(top_kept.first().map(|p| p[0]), Some(0.0));
+        assert_eq!(top_kept.last().map(|p| p[0]), Some(2999.5));
+        assert!(top_kept.iter().any(|p| p[1] == 1.0), "top min spike preserved");
+        assert!(top_kept.iter().any(|p| p[1] == 99.0), "top max spike preserved");
+        assert!(base_kept.iter().any(|p| p[1] == 101.0), "base min spike preserved");
+        assert!(base_kept.iter().any(|p| p[1] == 199.0), "base max spike preserved");
+    }
 }

crates/core/src/addr.rs

@@ -188,6 +188,12 @@ impl RangeRef {
             end: CellRef::new(self.end.row.max(o.end.row), self.end.col.max(o.end.col)),
         }
     }
+    /// The top-left cell of a list of areas: the lowest row and the lowest column across all of
+    /// them, whatever order they are listed in. Excel writes the relative formulas of a
+    /// multi-area validation or conditional format for this cell. `None` for no areas.
+    pub fn top_left(ranges: &[RangeRef]) -> Option<CellRef> {
+        ranges.iter().copied().reduce(|a, b| a.union(&b)).map(|r| r.start)
+    }
     /// Row-major iterator over the cells. Callers must bound huge ranges themselves.
     pub fn iter(&self) -> impl Iterator<Item = CellRef> + '_ {
         let (r0, r1, c0, c1) = (self.start.row, self.end.row, self.start.col, self.end.col);
@@ -307,6 +313,16 @@ mod tests {
         Ok(())
     }
 
+    #[test]
+    fn top_left_spans_every_area_in_any_order() {
+        let areas: Vec<RangeRef> = ["H62:H68", "H26:H27", "H93:H95"].iter().filter_map(|a| RangeRef::parse(a)).collect();
+        assert_eq!(RangeRef::top_left(&areas), CellRef::parse("H26"));
+        // Lowest row and lowest column, even when they come from different areas.
+        let areas: Vec<RangeRef> = ["C5:D6", "E2", "B9"].iter().filter_map(|a| RangeRef::parse(a)).collect();
+        assert_eq!(RangeRef::top_left(&areas), CellRef::parse("B2"));
+        assert_eq!(RangeRef::top_left(&[]), None);
+    }
+
     #[test]
     fn sheet_quoting_follows_excel() {
         for quoted in [

crates/engine/src/cf.rs

@@ -244,7 +244,7 @@ impl CfCache {
         let v = sh.value(c);
         let no_stats = RuleStats::default();
         for (idx, cf) in rules {
-            let first = cf.ranges.first().map(|r| r.start).unwrap_or(c);
+            let first = RangeRef::top_left(&cf.ranges).unwrap_or(c);
             let st: &RuleStats = match stats_need(&cf.rule) {
                 Some(need) => &*self.stats.entry(idx).or_insert_with(|| RuleStats::build(sh, &cf.ranges, need)),
                 None => &no_stats,

crates/engine/src/cmd/data/tests.rs

@@ -480,6 +480,45 @@ fn a_list_typed_without_quotes_is_saved_as_a_quoted_list() {
     assert_eq!(sheet_xml(&reopened), xml, "a second save writes the same rules");
 }
 
+#[test]
+fn a_relative_list_source_is_read_from_the_cell_being_checked() {
+    // As in Excel, `=$B1:$B2` on A3:A4,A1:A2 is written for A1 (the top-left cell of all the
+    // areas) and lists B4:B5 at A4. It used to list B1:B2 in every cell.
+    let mut s = Session::new();
+    s.new_workbook();
+    s.execute("range.setValues", json!({"range": "B1:B5", "values": [["a"], ["b"], ["c"], ["d"], ["e"]]})).unwrap();
+    s.execute("data.validation", json!({"range": "A3:A4,A1:A2", "type": "list", "formula1": "=$B1:$B2"})).unwrap();
+    let wb = s.doc().unwrap().wb.clone();
+    let dv = wb.active().unwrap().validations[0].clone();
+    for (cell, items) in [("A1", ["a", "b"]), ("A2", ["b", "c"]), ("A3", ["c", "d"]), ("A4", ["d", "e"])] {
+        let at = CellRef::parse(cell).unwrap();
+        assert_eq!(list_items(&wb, 0, at, &dv), items, "{cell}");
+        for v in ["a", "b", "c", "d", "e"] {
+            assert_eq!(check_validation(&wb, 0, at, v).is_none(), items.contains(&v), "{cell} with {v}");
+        }
+    }
+}
+
+#[test]
+fn a_list_source_that_takes_in_the_cell_does_not_list_the_value_being_typed() {
+    // `=$A1:$A2` on A2:A3 is A1:A2 at A2 and A2:A3 at A3. The list is the one before the entry, as
+    // in Excel; a new value used to land in its own source and pass.
+    let mut s = Session::new();
+    s.new_workbook();
+    s.execute("range.setValues", json!({"range": "A1:A2", "values": [["x"], ["y"]]})).unwrap();
+    s.execute("data.validation", json!({"range": "A2:A3", "type": "list", "formula1": "=$A1:$A2"})).unwrap();
+    let wb = &s.doc().unwrap().wb;
+    for (cell, accepted, refused) in [("A2", &["x", "y"][..], &["new"][..]), ("A3", &["y"], &["x", "new"])] {
+        let at = CellRef::parse(cell).unwrap();
+        for v in accepted {
+            assert!(check_validation(wb, 0, at, v).is_none(), "{cell} refuses {v}");
+        }
+        for v in refused {
+            assert!(check_validation(wb, 0, at, v).is_some(), "{cell} accepts {v}");
+        }
+    }
+}
+
 #[test]
 fn a_rule_with_an_unknown_type_operator_or_error_style_is_refused() {
     // A typo used to give a rule that validates nothing (`type="none"`) or the wrong check,

crates/engine/src/cmd/data/validation.rs

@@ -38,11 +38,18 @@ fn subtract_range(r: RangeRef, cut: &RangeRef) -> Vec<RangeRef> {
 }
 
 /// Removes the cells of `cuts` from every validation, keeping the rest of each rule's ranges.
+/// When the rule's top-left cell goes, its relative formulas are rewritten for the new top-left
+/// cell, so the cells left keep checking the same cells.
 pub(in super::super) fn remove_validation_cells(validations: &mut Vec<Validation>, cuts: &[RangeRef]) {
     for dv in validations.iter_mut() {
+        let before = RangeRef::top_left(&dv.ranges);
         for cut in cuts {
             dv.ranges = dv.ranges.iter().flat_map(|r| subtract_range(*r, cut)).collect();
         }
+        if let (Some(from), Some(to)) = (before, RangeRef::top_left(&dv.ranges)) {
+            dv.f1 = move_rule_formula(&dv.f1, from, to);
+            dv.f2 = dv.f2.take().map(|f| move_rule_formula(&f, from, to));
+        }
     }
     validations.retain(|d| !d.ranges.is_empty());
 }
@@ -145,8 +152,10 @@ fn list_source(f: &str) -> String {
     format!("\"{}\"", t.replace('"', "\"\""))
 }
 
-/// List entries of a list validation (literal or from a range).
-pub fn list_items(wb: &Workbook, sheet: usize, dv: &Validation) -> Vec<String> {
+/// List entries of a list validation (literal or from a range) for the cell `at`. A relative
+/// source is written for the rule's top-left cell and read from `at`, as in Excel (`=$B1:$B3` on
+/// A1:A9 lists B5:B7 at A5).
+pub fn list_items(wb: &Workbook, sheet: usize, at: CellRef, dv: &Validation) -> Vec<String> {
     let f = dv.f1.trim();
     if is_literal_list(f) {
         // A quoted list is a string literal: `""` inside stands for one `"`.
@@ -156,8 +165,8 @@ pub fn list_items(wb: &Workbook, sheet: usize, dv: &Validation) -> Vec<String> {
         };
         return items.split(',').map(|x| x.trim().to_string()).filter(|x| !x.is_empty()).collect();
     }
-    let at = dv.ranges.first().map(|r| r.start).unwrap_or_default();
-    match gridcraft_calc::evaluate(wb, sheet, at, f) {
+    let first = RangeRef::top_left(&dv.ranges).unwrap_or(at);
+    match gridcraft_calc::evaluate(wb, sheet, at, &formula_at(f, first, at)) {
         Value::Array(a) => a.data.iter().filter(|v| !v.is_empty()).map(Value::display).collect(),
         v if !v.is_empty() && !v.is_error() => vec![v.display()],
         _ => vec![],
@@ -175,9 +184,10 @@ pub fn check_validation(wb: &Workbook, sheet: usize, at: CellRef, input: &str) -
         return None;
     }
     let v = gridcraft_core::parse::parse_input(input, wb.date_system).value;
-    // The formulas are written for the first cell of the range and see the value being entered,
+    // The formulas are written for the top-left cell of all the areas and see the value being entered,
     // as in Excel (a custom `=A1>10` on A1:A9 checks A5's new value at A5).
-    let first = dv.ranges.first().map(|r| r.start).unwrap_or(at);
+    let first = RangeRef::top_left(&dv.ranges).unwrap_or(at);
+    let original = wb;
     let entered;
     let wb = if sh.value(at) == v {
         wb
@@ -193,7 +203,9 @@ pub fn check_validation(wb: &Workbook, sheet: usize, at: CellRef, input: &str) -
     let eval = |f: &str| gridcraft_calc::evaluate(wb, sheet, at, &formula_at(f, first, at));
     let num = |f: &str| eval(f).to_number().ok();
     let ok = match dv.kind {
-        ValidationKind::List => list_items(wb, sheet, dv).iter().any(|x| x.eq_ignore_ascii_case(input)),
+        // The list is the one the dropdown showed before the entry, as in Excel: a source that takes
+        // in the cell itself (`=$A1:$A2` on A2:A3 is A2:A3 at A3) doesn't list the value being typed.
+        ValidationKind::List => list_items(original, sheet, at, dv).iter().any(|x| x.eq_ignore_ascii_case(input)),
         ValidationKind::Custom => eval(&dv.f1).to_bool().unwrap_or(false),
         ValidationKind::TextLength => {
             let n = input.chars().count() as f64;

crates/engine/src/cmd/edit/paste_special.rs

@@ -284,7 +284,7 @@ pub(super) fn paste_special(s: &mut Session, p: &Json) -> Result<Json> {
                 crate::cmd::data::remove_validation_cells(&mut sh.validations, &[RangeRef::new(dest, dest)]);
                 if let Some(mut dv) = rule {
                     // Relative references move with the rule, as pasted formulas do.
-                    let first = dv.ranges.first().map_or(sc, |r| r.start);
+                    let first = RangeRef::top_left(&dv.ranges).unwrap_or(sc);
                     dv.f1 = crate::cmd::data::move_rule_formula(&dv.f1, first, dest);
                     dv.f2 = dv.f2.map(|f| crate::cmd::data::move_rule_formula(&f, first, dest));
                     dv.ranges = vec![RangeRef::new(dest, dest)];

crates/engine/src/cmd/insert.rs

@@ -1733,7 +1733,13 @@ fn clear_cf(s: &mut Session, p: &Json) -> Result<Json> {
             sh.cond_formats.clear();
         } else {
             for cf in sh.cond_formats.iter_mut() {
+                let before = RangeRef::top_left(&cf.ranges);
                 cf.ranges.retain(|r| !ranges.iter().any(|x| x.intersects(r)));
+                // The relative formulas are written for the top-left cell: when it goes, they're
+                // rewritten for the new one, so the areas left keep reading the same cells.
+                if let (Some(from), Some(to)) = (before, RangeRef::top_left(&cf.ranges)) {
+                    rebase_cf_formulas(&mut cf.rule, from, to);
+                }
             }
             sh.cond_formats.retain(|c| !c.ranges.is_empty());
         }
@@ -1741,6 +1747,19 @@ fn clear_cf(s: &mut Session, p: &Json) -> Result<Json> {
     })
 }
 
+/// Moves the relative references of a rule's per-cell formulas written for `from` to `to`.
+fn rebase_cf_formulas(rule: &mut CfRule, from: CellRef, to: CellRef) {
+    let mv = |f: &str| crate::cmd::data::move_rule_formula(f, from, to);
+    match rule {
+        CfRule::CellIs { a, b, .. } => {
+            *a = mv(a);
+            *b = b.as_deref().map(mv);
+        }
+        CfRule::Expression { formula, .. } => *formula = mv(formula),
+        _ => {}
+    }
+}
+
 fn manage_cf(s: &mut Session, p: &Json) -> Result<Json> {
     let sheet = target_sheet(s, p)?;
     if p.get("delete").is_none() && p.get("moveUp").is_none() && p.get("moveDown").is_none() {

crates/engine/src/tests.rs

@@ -2743,6 +2743,78 @@ fn validation_formulas_are_relative_and_see_the_new_value() {
     assert!(!ok(&mut s, "C1", "50"));
 }
 
+#[test]
+fn multi_area_rule_formulas_are_relative_to_the_top_left_cell_of_all_areas() {
+    // Issue #3152: Excel writes the formula for the top-left cell of all the areas (H26), whatever
+    // order they are listed in, not for the first area listed (H62).
+    let mut s = s();
+    s.execute("range.setValues", json!({"range": "F26:F27", "values": [[4], [5]]})).unwrap();
+    s.execute("data.validation", json!({"range": "H62:H68,H26:H27,H93:H95", "type": "custom", "formula1": "=MOD($H26,$F26)=0"})).unwrap();
+    let ok = |s: &mut Session, cell: &str, input: &str| s.execute("data.validate", json!({"cell": cell, "input": input})).unwrap()["ok"] == true;
+    assert!(ok(&mut s, "H26", "4"));
+    assert!(ok(&mut s, "H26", "8"));
+    assert!(!ok(&mut s, "H26", "3"));
+    assert!(ok(&mut s, "H27", "10"));
+    assert!(!ok(&mut s, "H27", "4"));
+
+    // Conditional formats anchor on the same cell: `=D2>0` on D5:D6,D2:D3 checks D2 at D2.
+    s.execute("range.setValues", json!({"range": "D2:D6", "values": [[1], [0], [0], [1], [0]]})).unwrap();
+    s.execute("home.conditionalFormat", json!({"range": "D5:D6,D2:D3", "rule": {"type": "expression", "formula": "=D2>0", "preset": "greenFill"}}))
+        .unwrap();
+    let wb = s.doc().unwrap().wb.clone();
+    let mut cache = crate::cf::CfCache::new();
+    let mut styled = |c: &str| cache.look(&wb, 0, CellRef::parse(c).unwrap()).and_then(|l| l.style).is_some();
+    assert_eq!([styled("D2"), styled("D3"), styled("D5"), styled("D6")], [true, false, true, false]);
+}
+
+#[test]
+fn removing_a_rules_top_left_cell_rewrites_its_formulas_for_the_new_one() {
+    let mut s = s();
+    let ok = |s: &mut Session, cell: &str, input: &str| s.execute("data.validate", json!({"cell": cell, "input": input})).unwrap()["ok"] == true;
+    let f1 = |s: &Session| s.doc().unwrap().wb.active().unwrap().validations[0].f1.clone();
+
+    // One area: clearing A1 off A1:A9 leaves A2:A9, whose cells still check themselves.
+    s.execute("data.validation", json!({"range": "A1:A9", "type": "custom", "formula1": "=A1>10"})).unwrap();
+    s.execute("data.validation", json!({"range": "A1", "clear": true})).unwrap();
+    assert_eq!(f1(&s), "A2>10");
+    assert!(ok(&mut s, "A2", "20"));
+    assert!(!ok(&mut s, "A2", "5"));
+    s.execute("data.validation", json!({"range": "A1:A9", "clear": true})).unwrap();
+
+    // Several areas: clearing H26 moves the top-left cell to H27, where `$H27,$F27` is checked.
+    s.execute("range.setValues", json!({"range": "F26:F27", "values": [[4], [5]]})).unwrap();
+    s.execute("data.validation", json!({"range": "H62:H68,H26:H27", "type": "custom", "formula1": "=MOD($H26,$F26)=0"})).unwrap();
+    s.execute("data.validation", json!({"range": "H26", "clear": true})).unwrap();
+    assert_eq!(f1(&s), "MOD($H27,$F27)=0");
+    assert!(ok(&mut s, "H27", "10"));
+    assert!(!ok(&mut s, "H27", "4"));
+    // Absolute and literal formulas don't move.
+    s.execute("data.validation", json!({"range": "J1:J3", "type": "list", "formula1": "=$B$1:$B$2"})).unwrap();
+    s.execute("data.validation", json!({"range": "J1", "clear": true})).unwrap();
+    let dv = s.doc().unwrap().wb.active().unwrap().validations.iter().find(|d| d.ranges[0].a1() == "J2:J3").unwrap().f1.clone();
+    assert_eq!(dv, "$B$1:$B$2");
+
+    // Conditional formats: Clear Rules on D2 drops the D2:D3 area, and D5:D6 keeps reading itself.
+    s.execute("range.setValues", json!({"range": "D2:D6", "values": [[1], [0], [0], [0], [1]]})).unwrap();
+    s.execute("home.conditionalFormat", json!({"range": "D5:D6,D2:D3", "rule": {"type": "expression", "formula": "=D2>0", "preset": "greenFill"}}))
+        .unwrap();
+    s.execute("range.setValues", json!({"range": "E2:E6", "values": [[1], [0], [0], [0], [1]]})).unwrap();
+    s.execute("range.setValues", json!({"range": "G2:G6", "values": [[0], [9], [9], [9], [0]]})).unwrap();
+    s.execute(
+        "home.conditionalFormat",
+        json!({"range": "E5:E6,E2:E3", "rule": {"type": "cellIs", "operator": "greater", "value": "=G2", "preset": "lightRedFill"}}),
+    )
+    .unwrap();
+    s.execute("home.clearRules", json!({"range": "D2,E2"})).unwrap();
+    let rules: Vec<gridcraft_model::CfRule> = s.doc().unwrap().wb.active().unwrap().cond_formats.iter().map(|c| c.rule.clone()).collect();
+    assert!(rules.iter().any(|r| matches!(r, gridcraft_model::CfRule::Expression { formula, .. } if formula == "D5>0")), "{rules:?}");
+    assert!(rules.iter().any(|r| matches!(r, gridcraft_model::CfRule::CellIs { a, .. } if a == "G5")), "{rules:?}");
+    let wb = s.doc().unwrap().wb.clone();
+    let mut cache = crate::cf::CfCache::new();
+    let mut styled = |c: &str| cache.look(&wb, 0, CellRef::parse(c).unwrap()).and_then(|l| l.style).is_some();
+    assert_eq!([styled("D5"), styled("D6"), styled("E5"), styled("E6")], [false, true, false, true]);
+}
+
 #[test]
 fn samples_build() {
     for (name, _) in crate::sample::SAMPLES {

crates/functions/src/text.rs

@@ -339,11 +339,11 @@ fn numbervalue(a: &[Arg], c: &mut dyn Ctx) -> R<Value> {
     if body.is_empty() {
         return num_val(0.0);
     }
-    let mut pct = 0;
-    while let Some(b) = body.strip_suffix('%') {
-        body = b.to_string();
-        pct += 1;
-    }
+    // Count the trailing percent signs and cut them off in place: copying the rest once per sign
+    // made a long run of them quadratic.
+    let kept = body.trim_end_matches('%').len();
+    let pct = body.len() - kept;
+    body.truncate(kept);
     let mut seen_dec = false;
     let mut out = String::new();
     for c in body.chars() {
@@ -1084,6 +1084,15 @@ mod tests {
 
     use crate::util::testutil::*;
 
+    /// Trailing percent signs each divide by 100, and a long run of them is cut off in one pass.
+    #[test]
+    fn numbervalue_percent_signs() {
+        close(ev("NUMBERVALUE", vec![t("5%%")]), 0.0005);
+        close(ev("NUMBERVALUE", vec![t("1,5%"), t(","), t(".")]), 0.015);
+        let many = format!("1{}", "%".repeat(32_000));
+        close(ev("NUMBERVALUE", vec![t(&many)]), 0.0);
+    }
+
     #[test]
     fn bahttext() {
         let bt = |x: f64| ev("BAHTTEXT", vec![n(x)]);

crates/ui-egui/src/grid/editor.rs

@@ -125,7 +125,7 @@ pub(super) fn list_picker(app: &mut SheetApp, ui: &mut egui::Ui, geo: &Geo, was_
         app.grid.list_picker = None;
         return;
     };
-    let items = gridcraft_engine::cmd::data::list_items(&wb, si, &dv);
+    let items = gridcraft_engine::cmd::data::list_items(&wb, si, c, &dv);
     let r = geo.cell_rect(sh, c);
     // Fit the popup to its rows (up to LIST_PICKER_MAX_ROWS); without a minimum the scroll area collapses to its 64 px default.
     let height = list_picker_height(items.len(), LIST_PICKER_ROW_H, ui.spacing().item_spacing.y);

crates/ui-egui/src/ribbon/home.rs

@@ -622,10 +622,13 @@ fn size_combo(app: &mut SheetApp, ui: &mut Ui, st: &Style) {
     let arrow_rect = Rect::from_min_max(egui::pos2(frame.right() - 16.0, frame.top() + 1.0), egui::pos2(frame.right() - 1.0, frame.bottom() - 1.0));
     let mut field_ui =
         ui.new_child(egui::UiBuilder::new().max_rect(text_rect.shrink2(vec2(6.0, 0.0))).layout(egui::Layout::left_to_right(egui::Align::Center)));
+    // The text edit is `interact_size.y` tall and puts its text at the top of that unless told
+    // otherwise: center it, on the Font name's baseline (#3155).
     let out = egui::TextEdit::singleline(&mut text)
         .id(field)
         .font(theme::ui_font(12.5))
         .frame(egui::Frame::NONE)
+        .align(egui::Align2::LEFT_CENTER)
         .desired_width(text_rect.width() - 12.0)
         .show(&mut field_ui);
     let resp = out.response;

crates/ui-egui/tests/it/font_size_box.rs

@@ -1,6 +1,7 @@
-//! Home ▸ Font Size is a box you type a size into, with the standard sizes behind its arrow (#932).
+//! Home ▸ Font Size is a box you type a size into, with the standard sizes behind its arrow (#932),
+//! and the size sits in the middle of that box (#3155).
 
-use egui::{Event, Key, Modifiers, accesskit::Role};
+use egui::{Event, Key, Modifiers, Rect, Shape, accesskit::Role};
 use egui_kittest::kittest::Queryable as _;
 use gridcraft_engine::Session;
 use gridcraft_engine::core::{CellRef, Value};
@@ -124,3 +125,31 @@ fn the_arrow_opens_the_plain_list_of_sizes() {
     h.run_steps(3);
     assert_eq!(size(&h, "A1"), 12.0, "Down from 11 then Enter picks 12");
 }
+
+/// The on-screen box of the painted text `text` that overlaps `within`. The grid's row headers
+/// paint "11" too, so the size has to be looked for inside its own box.
+fn painted_text(h: &Harness, text: &str, within: Rect) -> Rect {
+    h.output()
+        .shapes
+        .iter()
+        .find_map(|s| match &s.shape {
+            Shape::Text(t) if t.galley.job.text == text => {
+                let rect = t.galley.rect.translate(t.pos.to_vec2());
+                within.intersects(rect).then_some(rect)
+            }
+            _ => None,
+        })
+        .unwrap_or_else(|| panic!("{text:?} is painted inside {within:?}"))
+}
+
+#[test]
+/// A text edit aligns its text to the top of its rect unless told otherwise, which left the size
+/// 4 pt above the Font name's baseline.
+fn the_size_is_vertically_centered_in_its_box() {
+    let h = harness();
+    let field = h.get_by_role_and_label(Role::TextInput, "Font Size").rect();
+    let value = painted_text(&h, "11", field);
+    let name = painted_text(&h, "Calibri", Rect::EVERYTHING);
+    assert!((value.center().y - field.center().y).abs() <= 1.0, "the size is centered in its box: {value:?} in {field:?}");
+    assert!((value.center().y - name.center().y).abs() <= 1.0, "the size is on the Font name's baseline: {value:?} against {name:?}");
+}

crates/ui-egui/tests/it/ribbon_layout.rs

@@ -104,7 +104,10 @@ struct Clicks {
 #[test]
 /// The main button clicks once and the arrow twice separately; the tooltip keeps the platform shortcut, and the icon sits above the full-width label.
 fn big_split_button_separates_the_default_action_from_the_menu() {
-    let mut h = crate::common::builder().with_size(vec2(300.0, 200.0)).build_ui_state(
+    // The ribbon picks the shortcut by the OS egui reports, which kittest pins to Nix unless told:
+    // pin macOS, so the check is the same on every host (the other platforms' text is in
+    // `widgets::tests`).
+    let mut h = crate::common::builder().with_size(vec2(300.0, 200.0)).with_os(egui::os::OperatingSystem::Mac).build_ui_state(
         |ui, c: &mut Clicks| {
             let (main, arrow) = widgets::big_split_button(ui, Icon::Sum, "Auto\nSum", "AutoSum");
             c.main += u32::from(main.clicked());
@@ -125,8 +128,7 @@ fn big_split_button_separates_the_default_action_from_the_menu() {
     h.ctx.all_styles_mut(|s| s.interaction.tooltip_delay = 0.0);
     h.get_by_label("Auto Sum").hover();
     h.run_steps(6);
-    let shortcut = if cfg!(target_os = "macos") { "AutoSum (\u{2318}\u{21e7}T)" } else { "AutoSum (Alt+=)" };
-    assert!(h.query_by_value(shortcut).is_some(), "tooltip with the shortcut");
+    assert!(h.query_by_value("AutoSum (\u{2318}\u{21e7}T)").is_some(), "tooltip with the macOS shortcut");
     // The icon part sits above the label part, across the full width.
     let main = h.get_by_label("Auto Sum").rect();
     let arrow = h.get_by_label("Auto Sum options").rect();

crates/xlsx/src/sheet_write/rules.rs

@@ -52,8 +52,10 @@ pub(super) fn x14_cfvo(v: &CfValueKind) -> String {
     format!("<x14:cfvo type=\"{ty}\"><xm:f>{}</xm:f></x14:cfvo>", esc(&val))
 }
 
+/// One `cfRule` element. The formulas generated for text, blank, error and date rules refer to the
+/// top-left cell of all the rule's areas, the cell Excel reads relative references from.
 pub(super) fn cf_rule_xml(cf: &CondFormat, priority: u32, out: &mut Out) -> String {
-    let tl = cf.ranges.first().map(|r| r.start.a1()).unwrap_or_else(|| "A1".into());
+    let tl = RangeRef::top_left(&cf.ranges).map(|c| c.a1()).unwrap_or_else(|| "A1".into());
     let stop = if cf.stop_if_true { " stopIfTrue=\"1\"" } else { "" };
     let mut dxf = |st: &Style| dxf_id(&mut out.dxfs, st);
     let f = |x: &str| format!("<formula>{}</formula>", esc(&text_to_file(x)));

crates/xlsx/src/tests/roundtrip.rs

@@ -1678,3 +1678,21 @@ fn workbook_view_writer_clamps_out_of_range_model_values() {
         assert_eq!(back.view.tab_ratio, 1000);
     }
 }
+
+#[test]
+fn generated_rule_formulas_use_the_top_left_cell_of_every_area() {
+    // Issue #3152: the areas aren't in top-to-bottom order; the formula is written for C2, not C5.
+    let mut wb = Workbook::new();
+    let red = Box::new(Style::default());
+    wb.sheet_mut(0).unwrap().cond_formats.push(CondFormat {
+        ranges: vec![rr("C5:C6"), rr("C2:C3")],
+        rule: CfRule::ContainsText { text: "x".into(), style: red },
+        priority: 1,
+        stop_if_true: false,
+    });
+    let bytes = write_xlsx(&wb).unwrap();
+    let mut z = zip::ZipArchive::new(std::io::Cursor::new(bytes)).unwrap();
+    let mut xml = String::new();
+    z.by_name("xl/worksheets/sheet1.xml").unwrap().read_to_string(&mut xml).unwrap();
+    assert!(xml.contains("<formula>NOT(ISERROR(SEARCH(\"x\",C2)))</formula>"), "{xml}");
+}