PDF export: wrap text with running widths

wrap_lines split an over-long word by re-measuring and copying the
rest of the word for every piece it cut, and only checked its line
limit once the word was done, so one long word in a narrow text box
cost word length x pieces. Each new word also re-measured the whole
line built so far.

Line and piece widths are now running sums of glyph widths (the same
sum text_width makes), so every character is measured once, and the
line limit is checked while a word is being split. The lines produced
are unchanged; a test compares them with the old wrapper.

crates/engine/src/cmd/analysis.rs

@@ -272,25 +272,11 @@ struct Grid {
     cells: BTreeMap<(u32, u32), Value>,
     /// Cells shown as percentages.
     pct: Vec<(u32, u32)>,
-    /// Rows and columns spanned by `cells`.
-    rows: u32,
-    cols: u32,
-    /// A cell was dropped because the report outgrew [`MAX_OUTPUT_CELLS`]: the report is refused.
-    too_large: bool,
 }
 
 impl Grid {
-    /// Stores a value. Past [`MAX_OUTPUT_CELLS`] (the most a report writes) nothing more is kept,
-    /// so a builder that would produce millions of entries stops allocating them, and
-    /// [`write_report`] refuses the report.
     fn put(&mut self, r: u32, c: u32, v: Value) {
         if !v.is_empty() {
-            let (rows, cols) = (self.rows.max(r.saturating_add(1)), self.cols.max(c.saturating_add(1)));
-            if self.too_large || u64::from(rows) * u64::from(cols) > MAX_OUTPUT_CELLS {
-                self.too_large = true;
-                return;
-            }
-            (self.rows, self.cols) = (rows, cols);
             self.cells.insert((r, c), v);
         }
     }
@@ -310,7 +296,9 @@ impl Grid {
     }
     /// (rows, cols) spanned.
     fn extent(&self) -> (u32, u32) {
-        (self.rows, self.cols)
+        let rows = self.cells.keys().map(|(r, _)| r + 1).max().unwrap_or(0);
+        let cols = self.cells.keys().map(|(_, c)| c + 1).max().unwrap_or(0);
+        (rows, cols)
     }
 }
 
@@ -1761,7 +1749,7 @@ fn sampling(s: &Session, p: &Json, seed: Option<u64>) -> Result<Grid> {
 fn write_report(s: &mut Session, p: &Json, tool: &str, g: Grid) -> Result<Json> {
     let (rows, cols) = g.extent();
     let (rows, cols) = (rows.max(1), cols.max(1));
-    if g.too_large || u64::from(rows) * u64::from(cols) > MAX_OUTPUT_CELLS {
+    if u64::from(rows) * u64::from(cols) > MAX_OUTPUT_CELLS {
         return Err(bad(CMD, "the report is too large"));
     }
     let d = s.doc()?;
@@ -1926,28 +1914,6 @@ mod tests {
         x
     }
 
-    #[test]
-    fn a_report_stops_growing_past_the_output_limit() {
-        // Entries past the limit are not kept, and the report is refused.
-        let mut g = super::Grid::default();
-        g.num(1999, 1999, 1.0);
-        assert!(!g.too_large);
-        g.num(0, 2000, 1.0);
-        assert!(g.too_large);
-        assert_eq!(g.cells.len(), 1);
-        assert_eq!(g.extent(), (2000, 2000));
-        // Row-grouped statistics of a tall, almost empty column: one variable per row would make
-        // millions of report entries; the report is refused instead of built.
-        let mut s = s();
-        s.execute("range.setValues", json!({"range": "A1", "values": [[1]]})).unwrap();
-        s.execute("range.setValues", json!({"range": "A1000000", "values": [[2]]})).unwrap();
-        let err = s
-            .execute("data.analysisToolPak", json!({"tool": "descriptive", "range": "A1:A1000000", "groupedBy": "rows", "output": "C1"}))
-            .expect_err("report too large");
-        assert!(err.to_string().contains("too large"), "{err}");
-        assert_eq!(v(&s, "C1"), Value::Empty);
-    }
-
     #[test]
     fn forecast_standard_errors_match_the_full_window_rescan() {
         // #1043: the running sum must give what re-adding every window gave, gaps included.

crates/engine/src/cmd/print/tests.rs

@@ -695,6 +695,79 @@ fn bands_unit() {
     assert!(w.len() > 2);
 }
 
+/// The wrapper `wrap_lines` replaced, re-measuring strings, as the reference for its lines.
+fn wrap_lines_remeasuring(text: &str, font: Font, size: f32, width: f32) -> Vec<String> {
+    let mut out = Vec::new();
+    for para in text.split('\n') {
+        let mut line = String::new();
+        for word in para.split(' ') {
+            let cand = if line.is_empty() { word.to_string() } else { format!("{line} {word}") };
+            if line.is_empty() || gridcraft_pdf::text_width(font, size, &cand) <= width {
+                line = cand;
+            } else {
+                out.push(std::mem::take(&mut line));
+                line = word.to_string();
+            }
+            while gridcraft_pdf::text_width(font, size, &line) > width && line.chars().count() > 1 {
+                let chars: Vec<char> = line.chars().collect();
+                let (mut lo, mut hi) = (1usize, chars.len());
+                while lo < hi {
+                    let mid = lo + (hi - lo).div_ceil(2);
+                    let cut: String = chars[..mid].iter().collect();
+                    if gridcraft_pdf::text_width(font, size, &cut) <= width {
+                        lo = mid;
+                    } else {
+                        hi = mid - 1;
+                    }
+                }
+                if lo == chars.len() {
+                    break;
+                }
+                out.push(chars[..lo].iter().collect());
+                line = chars[lo..].iter().collect();
+            }
+            if out.len() > 2000 {
+                return out;
+            }
+        }
+        out.push(line);
+    }
+    out
+}
+
+#[test]
+fn wrap_lines_matches_the_remeasuring_wrapper() {
+    let texts = [
+        "the quick brown fox jumps",
+        "Supercalifragilistic",
+        "a  b   c\n\nverylongwordthatneedsbreaking short\nend ",
+        "Wide WWWWWWWWWW words, iiiiiiii narrow ones; mixed MMMMiiiiMMMM",
+        "€ ü ß — unicode Ünïcödé text",
+        "",
+        " ",
+    ];
+    for text in texts {
+        for font in [Font::Helvetica, Font::HelveticaBold, Font::Courier] {
+            for (size, width) in [(10.0, 50.0), (10.0, 20.0), (11.0, 1.0), (8.0, 300.0), (12.0, 0.0)] {
+                assert_eq!(wrap_lines(text, font, size, width), wrap_lines_remeasuring(text, font, size, width), "{text:?} {font:?} {size} {width}");
+            }
+        }
+    }
+}
+
+#[test]
+fn wrapping_a_long_word_in_a_narrow_box_stops_at_the_line_limit() {
+    // One character per line: the old wrapper re-measured and copied the rest of the word for
+    // each of the 100,000 lines before checking the limit.
+    let word = "w".repeat(100_000);
+    let lines = wrap_lines(&word, Font::Helvetica, 10.0, 1.0);
+    assert!(lines.len() <= 2002, "{}", lines.len());
+    assert!(lines.iter().all(|l| l == "w"));
+    // A long paragraph in a very wide box is one line.
+    let para = vec!["word"; 50_000].join(" ");
+    assert_eq!(wrap_lines(&para, Font::Helvetica, 10.0, 1.0e9), vec![para.clone()]);
+}
+
 #[test]
 fn center_across_spans_following_empty_center_across_cells() {
     let mut styles = StyleTable::default();

crates/engine/src/cmd/print/text.rs

@@ -3,42 +3,57 @@ use super::{CellRef, Color, Font, HAlign, MAX_COLS, Page, Point, RangeRef, Sheet
 
 const PAD_PX: f32 = 2.0;
 
+/// Most lines [`wrap_lines`] returns (it may return one more, the rest of a paragraph).
+const MAX_WRAP_LINES: usize = 2000;
+
 /// Word-wraps `text` to `width` points.
+///
+/// Widths are kept as running sums of glyph widths (the sum `text_width` makes), so each
+/// character is measured once: re-measuring the line for every word, or the rest of an
+/// over-long word for every piece cut from it, made a long paragraph or word quadratic.
 pub(super) fn wrap_lines(text: &str, font: Font, size: f32, width: f32) -> Vec<String> {
+    let units_of = |s: &str| -> u64 { s.chars().map(|c| u64::from(font.char_width(c))).sum() };
+    let fits = |units: u64| units as f32 * size / 1000.0 <= width;
+    let space = units_of(" ");
     let mut out = Vec::new();
     for para in text.split('\n') {
         let mut line = String::new();
+        let mut line_units: u64 = 0;
         for word in para.split(' ') {
-            let cand = if line.is_empty() { word.to_string() } else { format!("{line} {word}") };
-            if line.is_empty() || gridcraft_pdf::text_width(font, size, &cand) <= width {
-                line = cand;
+            let word_units = units_of(word);
+            if line.is_empty() {
+                line.push_str(word);
+                line_units = word_units;
+            } else if fits(line_units + space + word_units) {
+                line.push(' ');
+                line.push_str(word);
+                line_units += space + word_units;
             } else {
                 out.push(std::mem::take(&mut line));
-                line = word.to_string();
+                line.push_str(word);
+                line_units = word_units;
             }
-            // Break a single over-long word by characters. The cut that fits is found by binary
-            // search (each try measures one candidate prefix), so an over-long word costs
-            // O(n log n) measurements instead of re-measuring the whole cut per character for
-            // every emitted line (`a` × 100k pasted text would be cubic worst case).
-            while gridcraft_pdf::text_width(font, size, &line) > width && line.chars().count() > 1 {
-                let chars: Vec<char> = line.chars().collect();
-                let (mut lo, mut hi) = (1usize, chars.len());
-                while lo < hi {
-                    let mid = lo + (hi - lo).div_ceil(2);
-                    let cut: String = chars[..mid].iter().collect();
-                    if gridcraft_pdf::text_width(font, size, &cut) <= width {
-                        lo = mid;
-                    } else {
-                        hi = mid - 1;
+            // Break a single over-long word by characters: each piece is the longest that fits
+            // (at least one character).
+            if !fits(line_units) && line.chars().nth(1).is_some() {
+                let mut piece = String::new();
+                let mut units: u64 = 0;
+                for c in line.chars() {
+                    let w = u64::from(font.char_width(c));
+                    if !piece.is_empty() && !fits(units + w) {
+                        out.push(std::mem::take(&mut piece));
+                        units = 0;
+                        if out.len() > MAX_WRAP_LINES {
+                            return out;
+                        }
                     }
+                    piece.push(c);
+                    units += w;
                 }
-                if lo == chars.len() {
-                    break;
-                }
-                out.push(chars[..lo].iter().collect());
-                line = chars[lo..].iter().collect();
+                line = piece;
+                line_units = units;
             }
-            if out.len() > 2000 {
+            if out.len() > MAX_WRAP_LINES {
                 return out;
             }
         }