Main adds UiRequest::InsertName (Paste Name, Use in Formula), which puts a name in the cell
editor; a macro step drops it, as it drops a request to start editing a cell.
The recorder expanded an automate.runScript step from the workbook as it
stood when the recording stopped, so a script edited or deleted during the
recording changed the saved macro, or dropped the step. The run now leaves
the steps it ran with the recorder (Recorder::ran, by step index, within
the byte budget), and the conversion reads those, falling back to the
workbook only when they could not be kept.
* Go To: names match in any case and script, as formulas match them
* Paste Name: only the names in view are laid out
* Docs: LAMBDA recursion limit and called error names; one Page Layout view row with the side margin marked unverified
* Go To and Paste Name: cargo fmt
Every path that adds a macro runs macros::check, and an xlsx save of a
macro that skipped it fails (the stash refuses the oversized item). A
JSON save wrote such a macro instead, and the next open dropped it with
a warning. json_bytes now checks each macro first, so the save fails in
either format with the check's message and the macro stays in the open
workbook. Tests that build hostile JSON files write them directly.
stash::items capped the items at MAX_ITEMS before reading them, so one
over the size limit took a place (a readable item past the cap was then
left out with fewer than MAX_ITEMS listed) and one past the cap was
counted in `more` though it could never be listed. Items are now read
first: the first MAX_ITEMS readable ones are listed and only readable
ones past them are counted.
The stash reads a legacy _sc_<key> name as data whether or not it is
hidden, so writing key macro_0 removed a person's visible _sc_macro_0
name with no word. The index allocator steps around that key as well;
this test fails without it.
One file with a visible name of the storage shape, a macro in a newer
format and one whose input declaration breaks the rules, saved and
reopened xlsx then JSON and JSON then xlsx: the visible name stays, the
newer macro comes back whole and numbered around the name, the broken
one is left out once, and the readable one survives.
A macro whose format version is above this build's was dropped on open,
so the next save removed it from the file, and the warning said only
that it couldn't be opened. It is now kept as the file held it
(Workbook::macros_unread, shared between snapshots), never read, listed
or run, and written back unchanged by JSON and xlsx saves, numbered
after the readable macros and around visible names of the storage
shape. Kept macros count toward the 1,000-macro limit after the
readable ones; one too large for an xlsx item is left out. The warning
says it is kept and saved back; damaged and over-limit macros keep
their own warning.
check_limits capped the name, description, notes, step count, depth and
input names, and left the shortcut, permissions, output anchor, default
range, column types, command ids, Repeat ranges, If cells and values and
Stop messages bounded only by the item size; the input declaration was
stored unchecked (rows [5, 2], a cell input with cols [2, 5]).
Now each of them has a limit (docs/macros.md lists them), one-line
fields refuse control characters, and a command id is letters, digits,
. and _ (every registered id passes, tested). An If value may be null
(Empty and NotEmpty ignore it); Repeat.max stays the runner's to bound.
An input's least rows and columns can't pass its most, a cell input is
one row and one column with no header and at most one column type, and
no input lists more column types than columns. check_limits takes every
struct apart field by field, so a new field doesn't compile there until
its limit is decided. A macro from a file that breaks a rule is left
out with the usual warning, never changed to fit.
The JSON reader replaces a workbook with an empty sheet list by a new
one before macros::load reads the file's macro entries, so they were
lost with no warning. The entries are carried across the reset. The
reset itself, which also starts the names and styles afresh, is
unchanged.
with_names numbered macros 0..N, and stash::set_many refuses to write a
hidden name beside a visible one of the same name, so a visible
_gc_macro_0_0 (from a file, or defined after the file opened, when the
stored names are no longer in the workbook) made every xlsx save of a
workbook with macros fail. The index is GridCraft's choice: macros now
take the free indices from 0 up, skipping every key a visible
workbook-scope name of the storage shape uses (compared as the stash
reads names), in their order. No arithmetic depends on a number from
the file.
* UI: theme tokens for icon, reference and sheet-control colours; WCAG contrast test
Tokens gains the colours the chrome was hard-coding, each with a light
and a dark value: on_accent (text on an accent fill), an eight-colour
category palette (theme::Cat), the paper colour inside icons, reference
colours for the formula bar and for the sheet, the message box warning
disc, the tab bar scroll thumb, and sheet_control_* colours that follow
the sheet and so stay light in both themes.
What now comes from the tokens:
- icons: paper (white pages glared in dark mode) and the accent
constants; icons placed on the sheet use icons::paint_on_sheet, which
keeps the light colours;
- reference colours (editor::REF_COLORS), which were hard to read on the
dark formula field;
- white text on the accent in OK, Solve, slicer tiles and the AutoSave
switch, 2:1 on the dark accent;
- the comments pane (a white card with light text in dark mode), gallery
hover and swatch outlines, the message box disc, the tab bar thumb,
chart selection frames, and the sheet's filter and validation buttons.
A unit test (theme::contrast_tests) checks every token pair used by the
ribbon, popups, dialogs, panes, formula bar, status bar and sheet in
both themes against WCAG 2: 4.5:1 for text and 3:1 for glyphs. It caught
the dark danger red (3.5:1 on hover) and the selected header text (4.1:1
light), which are adjusted.
* UI: ribbon scroll arrows, large split button for Formulas › AutoSum
- widgets::big_split_button: the icon runs the default action, the
label and its arrow open the menu. It returns both responses, with
accessible names ("AutoSum" and "AutoSum options"). big_button shares
its label layout.
- Formulas › AutoSum uses it: the icon inserts SUM as before, and the
arrow, which used to do the same, opens the Sum / Average / Count /
Max / Min / More Functions menu that Home › AutoSum already had
(shared as autosum_menu). Its keytip is unchanged.
- When a tab's groups are wider than the window, arrows at the card's
edges scroll them; before, only the mouse wheel did and nothing showed
that the tab went on. ribbon::RibbonOverflow records the groups' and
the card's sizes each frame.
- A test checks every tab fits the card's three rows. It found View ›
Show stacking four checkboxes, with Headings cut off; Show is now two
columns (Ruler, Gridlines / Formula Bar, Headings).
Tests: tests/ribbon_layout.rs (the split button's two parts, AutoSum's
icon and menu, the scroll arrows, the card height).
* UI: formula bar grows from one to five lines; code editor widget
The formula bar is a top-aligned row: the Name Box and the cancel,
enter and fx buttons stay on the first line while the field grows. Its
height is the content's laid-out line count (Alt+Enter or wrapped text)
times the font's row height, from one line (30 px, as before) to five,
then the field scrolls with the caret in view. This holds while editing
and while viewing a cell. The height eases over 120 ms when the line
count changes, and the chevron pins it at five lines (it used to give a
fixed 72 px). The in-cell editor likewise stops at five lines and
scrolls. formula_bar::BarLayout records where the parts went, for tests.
widgets::code_editor(ui, id, &mut text, Lang, max_lines) is a small
code editor for features that edit code: the monospace font, syntax
colours from Tokens::syntax (new, with light and dark values in the
contrast test) for Python (keywords, strings including triple-quoted
ones, numbers, comments and builtins) and LaTeX (commands, scripts and
comments), Tab inserting four spaces (or indenting every selected line,
Shift+Tab dedenting), Enter keeping the line's indentation (one level
more after a Python colon), and a scroll area that follows the caret.
The tokenizer and the edits are pure functions with tests, including
hostile input that must keep spans on char boundaries.
kittest (tests/formula_bar.rs) covers Alt+Enter up to eight lines with
the Name Box and buttons fixed and the caret visible, the commit,
viewing the committed cell, the chevron, the ease, the in-cell cap and
the code editor's Tab and Enter.
* UI: Shift+Tab in the code editor dedents instead of indenting
The editor consumed plain Tab before Shift+Tab, and egui's key match ignores Shift
when the pattern lacks it, so a Shift+Tab was taken as Tab and indented the line.
Shift+Tab is now consumed first; a plain Tab still inserts spaces.
* UI: the ribbon card stays inside a narrow window, so its right scroll arrow is on screen
The row above the ribbon can be wider than a narrow window, and the card took that width, so the
right scroll arrow was drawn past the window's edge and couldn't be clicked: below about 640 px on
macOS, and at 700 px with Linux's wider default fonts, where CI's ribbon test failed. The card is
now kept within the window with the same margin it has on the left.
* UI: each ribbon tab keeps a scroll offset of its own
The ribbon's scroll area used one identity for every tab, so scrolling an overflowing tab and
switching to another overflowing one hid that tab's first groups. Each tab now has its own scroll
state: a tab opened after another was scrolled starts at its left edge, and a tab keeps its offset
while others are used.
* UI: the in-cell editor keeps its whole width for the text and shows every line
Merged with main, the grid's own test asked the in-cell editor to wrap its
text at the field's full width and to show every line (the editor never
scrolls); the editor widget wrapped it inside the formula bar's scroll area,
which took the bar's width off the text (168 px tall where 156 was right),
and the grid capped it at five lines. The in-cell editor now shows the text
field on its own, through the one show_edit helper the formula bar also
uses, and grows with every line; the formula bar keeps its five lines and
its caret scroll. The branch's five-line test for the cell editor becomes a
grows-with-every-line test.
* Docs: the UI building blocks' revision rows carry the date they land
The rows said 2026-10-11, older than upstream rows above them, and the
ui-parity row said the in-cell editor is capped at five lines.
* UI: the formula bar's view of a cell starts at the cell's top
The bar's read-only view kept one scroll offset for every cell, so a cell
shown after scrolling another's text started scrolled. The offset is kept
per cell now.
* UI: the editor's field does nothing with Enter on its own
The editor handles Enter (commit) and Alt+Enter (a line break) itself, and a
message box over the editor takes Enter to close. The field under it is a
multi-line TextEdit since the bar grew, whose own return key would add a
line if it ever saw Enter; return_key(None) keeps that from depending on
where focus sits. A test shows Enter over a message box adds nothing to the
entry (focus is off the field then, so it passed before too: this is
hardening, not a repair). The doc comment split by the show_edit helper is
mended.
* Docs: ui-parity says the in-cell editor shows every line, and its revision table is whole
A sentence still said the in-cell editor stops at five lines, and a blank
line between the table's separator and its first row ended the table.
* UI: the split button's tooltip carries the shortcut hint like every ribbon button's
big_split_button built its tooltip with the bare translation, so AutoSum,
which became a split button, lost its shortcut hint. It uses tip_text now;
the split-button test hovers the button and looks for the hint.
* UI: a selection that ends at the start of a line leaves that line alone
Selecting "a\n" in "a\nb" and pressing Tab also indented b, and Shift+Tab
could take its indentation: the line after the selection was counted as
touched. It is touched only when the selection reaches into it.
* UI: the code editor applies its keys in input order, with the typing around them
The editor consumed Enter, Tab and Shift+Tab before the text field saw the
frame's events, so a frame carrying typed text followed by Enter (events
gather between repaints, and under key repeat) put the newline before the
text, and two Enters in one frame made one line. The editor now walks the
frame's events in order and applies typed text, pastes, Enter, Tab,
Shift+Tab, Backspace and Delete itself, taking them from the queue; the
first event it does not handle and everything after it stay for the field,
which runs next, so the order holds either way.
* UI: the code editor keeps the input order past the keys the text field handles
The editor applied its keys up to the first event it did not handle and
left that event and everything after it to the text field, which has
its own Tab and Enter: select all followed by Tab in one frame replaced
the code with a tab character, and since the platform sends a key event
before each text event, an Enter after ordinary typing lost its
indentation.
The editor now applies its keys up to the first event the field acts on
(a caret or selection key, a key under a command modifier, IME, a click);
that event and the run after it stay for the field; from the editor's
next key on, the keyboard events are held back under the editor's id for
its next pass, where it puts them ahead of that pass's input and splits
again. They go only to the editor they were typed into, only while it
still has the focus, and only in the pass right after; otherwise they
are dropped rather than typed into another widget. Printable key presses
do not split the stream. Tab under a command or option modifier is taken
off the queue, and Enter under Shift or Option is the editor's newline,
so the field never gets a Tab or an Enter of a focused editor.
* UI: the ribbon layout and formula bar tests join the crate's integration test binary
Since #2372 the crate's integration tests are one binary built from tests/it/, one module per file; only tests that set process-wide state stay separate. These two set none.
* UI: the formula bar's one-line height follows the font, so five lines fit on Windows
One line was a fixed 30 px and the bar grew by one row height per line.
The panel's and the field's margins take 12 px of that, and rounding to
the pixel grid up to another, so a row taller than 17 px lost the last
counted line: with the Windows UI font (17.28 px rows) five lines showed
four, and bar_grows_to_five_lines_then_scrolls_with_name_box_pinned
failed there.
formula_bar::one_line(row_h) is 30 px unless the rows need more, and
every counted line fits whatever the font. The kittest heights are
computed from it rather than from 30, and a unit test checks the
arithmetic for rows of 15.6 to 20 px.
* UI: Paste Special's OK button uses the on-accent colour
It was the one OK button still drawn white on the accent: 2.14:1 in the dark theme, where every other OK uses on_accent (7.1:1).
The Column or Bar menu on the Insert tab listed every column and bar
type of the All Charts list except 100% Stacked Bar. It now lists it
after Stacked Bar, and choosing it runs insert.chart with type bar and
subtype stacked100.
Insert > Line or Area and the All Charts list offer 100% Stacked Area,
and insert.chart and chart.set take it as type area with subtype
stacked100. Each series' area stacks on the ones before it as its
share of the category's total. When every series on the value axis is
100% stacked and no value is negative, the axis runs from 0% to 100%.
A blank cell counts as zero, and a category whose total is zero stays
on the baseline.
An XLSX area chart with percentStacked grouping now opens as 100%
stacked and is saved back as percentStacked. It used to open as a
stacked area and was saved as stacked.
prxnvt