Formulas > Error Checking is now a split button. The button opens the
Error Checking dialog as before, and its arrow opens a menu with Error
Checking… and Circular References. Circular References lists a cell on
each circular reference as Sheet!A1, up to 100, and picking one selects
it on its own sheet and scrolls the grid to it. With no circular
reference the item is unavailable.
The calculation kept only the loops its latest run found, so typing in
any cell outside a loop emptied the list, and the status bar's Circular
References with it, while the loop was still there. A partial
recalculation now keeps the loops among the formulas it does not
evaluate. In automatic calculation a loop leaves the list once an edit
breaks it. In manual calculation only the edited formulas run, so a
listed cell stays until it is edited or the workbook is recalculated.
A full recalculation or iterative calculation builds the list again.
The Header & Footer tab now has the Scale with Document and Align with
Page Margins check boxes, and pageLayout.headerFooter takes
scaleWithDoc and alignWithMargins. XLSX already kept both settings,
but nothing else read them.
With Scale with Document on, header and footer text prints at the
sheet's print scale. With it off, the text keeps its point size. With
Align with Page Margins on, the left and right sections line up with
the page's side margins. With it off, they start 0.7 inch from the
paper's edges, or a quarter of the page width on paper narrower than
2.8 inches. The Page Layout view draws headers and footers and takes
clicks on them the same way. Both settings are on by default, so a
sheet printed at a scale other than 100% now prints its header and
footer text at that scale.
The Page Layout view row in docs/ui-parity.md listed both options as
missing. The Header & Footer tab has had both check boxes since #344, and
the first page and the even pages print and show their own header and
footer. The row now says so and lists Scale with Document and Align with
Page Margins as missing instead: XLSX keeps both settings, but no control
shows them and printing does not read them.
Data > Outline > Settings now has Summary rows below detail and Summary
columns to right of detail. With one cleared, each group's - / + button
sits on the line before the group, its bracket runs down to the last
detail line, and Hide Detail, Show Detail, the level buttons and
Ungroup mark or clear the collapsed flag on that line. Changing a
direction moves the flags of collapsed groups to their new summary
lines.
- model: Sheet::summary_below and summary_right (on by default, also
for older JSON).
- xlsx: read and written as sheetPr/outlinePr summaryBelow and
summaryRight; files that set them no longer lose them on save.
- engine: data.outlineSettings {sheet?, summaryBelow?, summaryRight?},
undoable; outline::groups_with places the summary line.
- ui: a Settings button in the Data tab's Outline group opens the
dialog; the outline band follows the setting.
The sheet tabs took up to 60% of the tab bar and the horizontal
scrollbar the rest, and nothing between them could be dragged. The
gap at the scrollbar's left edge is now a handle: it shows the resize
cursor, and dragging it right gives the tabs more of the bar, until the
scrollbar is 100 px wide. After the window is narrowed, the scrollbar
is still 100 px wide. Dragging it left gives the scrollbar more, down
to the New sheet button. Room the tabs do not fill stays empty, and
New sheet stays after the last tab.
Each open workbook keeps its own share while it is open. The share is
not saved in the file, and a workbook starts at the default.
The cell menu of a PivotTable's value, subtotal or grand total cell now
has a Show Details item after Sort Z to A. It runs pivot.showDetails on
the active cell, which lists the cell's source records on a new sheet,
as double-clicking the cell does. Labels and headers of a current
report, and cells outside a report, do not offer it. In a report that
is out of date every cell of the report offers the item, and running it
shows the message that asks for a refresh.
Whether the menu offers the item is cached per document, revision,
sheet and active cell.
When a fill starts from a date, the right-drag fill menu and the Auto
Fill Options button now also offer Fill Days, Fill Weekdays, Fill Months
and Fill Years. edit.autoFill takes them as the modes days, weekdays,
months and years.
A lone date steps by one unit. Two or more dates step by the difference
between the first two in that unit, or by one unit when both fall in
the same one. Fill Weekdays skips Saturday and Sunday, and a start on a
weekend moves to the next weekday first. Fill Months and Fill Years keep
the day of the month, clamped to the month's last day. A source that is
not all dates fills as a plain drag does.
Fills by months or years now keep the time of day of a date with a
time. A plain drag of dates a month apart and Series by Month or Year
used to drop it.
Ctrl+Shift+U ran the Ctrl+U shortcut on Windows and Linux and underlined
the selection. In Excel it expands or collapses the formula bar, on
Windows and as Control+Shift+U on a Mac. It now does that on the grid
and in the cell editor or formula bar while editing, and the entry stays
open.
The new UI command view.expandFormulaBar {on?} sets the state, or
toggles it without a parameter, and returns {on}. The chevron at the end
of the formula bar is unchanged.
The status bar always showed Average, Count and Sum for a selection of
several cells and had no menu. A right-click on it now opens a menu with
Average, Count, Numerical Count, Minimum, Maximum and Sum, as in Excel.
Average, Count and Sum are on by default; the other three are off.
The text on the status bar can no longer be selected, so a right-click
on the mode text or a statistic opens the menu as well. The zoom and
view controls handle their own clicks as before.
The choice is a preference set with the new view.statusBar command and
kept in prefs.json. A prefs.json without it keeps the defaults.
The Go To dialog lists the named ranges of the workbook and of every
sheet, a name scoped to another sheet as Sheet2!Name, without hidden
names, constants or formulas. After them it lists the references
entered in the dialog, newest first, and a double-click on an entry
goes there.
edit.goTo takes several names or references separated by commas
(Price, Type or B14:C22,F19:G30) and selects them all, follows a name
that refers to several areas, and goes to Sheet2!Name on Sheet2. With
record: true it keeps a reference that holds no name among the recent
ones, and with list: true it returns the names and the recent
references.
formulas.pasteName lists the names the active sheet can use (workbook
names and the sheet's own, without hidden names, in alphabetical order).
With name it puts the name at the caret of the formula being edited,
replacing selected text, or starts =Name; with list: true it writes each
name and the text of what it refers to in two columns from the active
cell. The Paste Name dialog opens from F3 when the workbook has names,
from Use in Formula's new Paste Names… item and from Alt+M, S, P. While
a dialog is open over the edit, the editor takes no keys.
Use in Formula lists the same names, and formulas.useInFormula inserts
at the caret instead of replacing the text being edited.
automate.allScripts reports trusted since #2178, and scripts reopened from
a file are not trusted yet, so the side-by-side test expects the flag and
compares names and steps after the round trip. cargo xtask parity gives
276 / 292 now (upstream added a command), so the ROADMAP and ui-parity
summaries say so, and this branch's revision rows (275 / 291 to 276 / 292)
sit at the top of their tables with the date they land.
With row 1 frozen, Page Up could land on A1, which is always on screen, while the scrolled rows
stayed a page down (row 10, Page Down, Page Up, Page Up ends on row 1 with rows 2-9 hidden). The
same held for Ctrl+Up into frozen rows and Ctrl+Left / Alt+Page Up into frozen columns.
Arrow and paging keys now record the cell they moved from (`GridState::reveal_from`). When such a
move goes from the scrolled rows (columns) into the frozen ones, the scrolled area goes back to
its top (left). Other reveals (clicks, Find, Go To, Name Box, Undo, the control channel, formula
pointing) leave it unset and keep the view where the user scrolled it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- The workbook's active sheet is an atomic set in place (Workbook::active_sheet /
set_active_sheet), so a window swap or sheet switch never clones the
Arc<Workbook> or marks it dirty. Selections already live in DocState and the
window views. Save records the sheet of the most recently active window.
- A dialog taken out of its window while it runs goes back to that window when
a command run from it switched windows (dialogs::show, ui.dialog.confirm).
- view.arrangeAll {arrange?: tiled|horizontal|vertical|cascade, activeWorkbook?}
returns the visible windows, active first; the desktop moves and sizes the
native windows over the main window's monitor. New Window and Arrange All
buttons on the View ribbon; Arrange Windows dialog.
- Docs: ui-parity, hardware-parity, gaps #20, target-app-parity, ROADMAP.
Each engine window is drawn in its own native window through craft-window's
immediate-viewport driver (desktop only; the web app keeps one window). The
root viewport shows one window and adopts another when its window closes.
- WindowUi: the cell draft, text-box draft, dialog, Backstage, message,
toast, notice, grid state, name box, key tips, selected chart, Tab run and
edit mode are per window. SheetApp's fields hold the active window's; the
others are parked and swapped in when a window is drawn or activated, and
after any command that switched windows.
- Session::show_window makes a window current for drawing without counting
as an activation.
- The ribbon in each window acts on it; menu bar commands and scripts go to
the window focused last. Leaving a window enters its draft as Enter would.
- A window's close button runs window.close: one of several windows on a
workbook closes without asking, a workbook's last asks when unsaved.
SheetApp::request_quit (macOS Quit item, Dock quit) asks about each unsaved
workbook in its window; Cancel stops. Save Changes answers moved to
SheetApp::answer_save_changes.
- The last window closed quits on Windows and Linux; macOS hides the root
and keeps running until New or Open.
- Fonts are bound for every open workbook, since each may be showing.
craft-window is pinned to the aiongg/craft-libs window-list branch until it
merges into storytold/craft-libs.
Session keeps a window list (stable ids, per-window selection, active sheet
and per-sheet selections swapped into the workbook without dirtying it)
in place of the index-based hidden list and the copying New Window.
Titles read Name:1 / Name:2 for a workbook with several windows.
File > Close closes one window of several; window.close, window.list and
window ids for window.activate, view.switchWindows, view.hideWindow and
view.unhideWindow. Control channel and MCP tools take window/doc ids;
scroll positions and cell drafts belong to their window.
With headings hidden too, a level button sat across the empty column band
at the grid's top edge, so a click there still ran it. Outline hit testing
now stops when both bands are empty. The parity doc no longer lists Ctrl+8
as missing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A sheet can hide its outline's level buttons and brackets while keeping
the outline (Excel's Ctrl+8, saved as showOutlineSymbols="0"). It wasn't
modelled, so such sheets showed a wide outline band Excel doesn't.
- model: Sheet::show_outline_symbols (default on, also for older JSON).
- xlsx: read and written on the sheet view.
- engine: view.showOutlineSymbols {on?} (Ctrl+8), undoable.
- ui: no outline bands while it's off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A number too wide for its column is drawn as ####. With a repeat fill
(`*` in the format, as in the Accounting format) the fill step then
rebuilt the text from the formatted value, so it overflowed and, being
right-aligned, lost its leading digits: 2,509.00 CHF in a narrow column
was drawn as "509.00 CHF". The fill now leaves #### alone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The catalog went from 274 / 290 to 275 / 291 with View › Macros › Record Macro, and
parity-checklist.md says so, but the ROADMAP.md headline, ui-parity.md and target-app-parity.md
still said 274 / 290 (and 290 catalog ids). They now match, with revision rows.
crates/ui-egui/src/grid.rs: keep main's touch-pan guard around interact, add 1095's update_cursor call after it.
docs/ui-parity.md: one Last updated line, change notes combined; both history rows kept.
ROADMAP.md: all progress-log rows kept.
docs/ui-parity.md: one Last updated line, change notes combined; both history rows kept; ribbon row wording tidied.
aiongg