All twelve sliders (Master, Red, Green, Blue) take After Effects'
ranges: Exposure valid -100..100, slider -4..4, 2 decimals (was -20..20,
slider -5..5); Offset -2..2, slider -0.5..0.5, 4 decimals (unchanged);
Gamma Correction valid and slider 0.1..10, 2 decimals (was 0.01..9.99,
slider 0.1..3).
Every value inside the old Exposure and Offset ranges stays valid. Saved
values are not clamped on load, so a gamma below 0.1 from an older
project or a Photoshop import (0.01..9.99) is kept and still renders
(the renderer's 0.01 floor is unchanged); only new edits clamp to 0.1.
Test of the ranges and of an old gamma surviving the load refresh.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With Bypass Linear Light Conversion off, Exposure decoded and re-encoded
with the piecewise sRGB curve. After Effects 2026 renders (sRGB working
space, 32 bpc) of Offset 0.0005 / 0.002 / 0.02 / 0.1 on black measure
8 / 15 / 43 / 90, which a pure 2.2 power predicts (8.06 / 15.13 / 43.08 /
89.54) and the sRGB curve does not (1.65 / 6.59 / 38.68 / 89.04).
The effect now uses its own 2.2 power curve on the CPU and in the GPU
kernel; the shared colour functions and other effects are unchanged. As
before, the conversion applies whatever the working space, also a
linearised one. Negative values go through both curves mirrored (input
was clamped at 0 before), so defaults are an identity for 32-bpc values
and a negative Offset darkens past black without NaN.
New test against the AE values; existing Exposure tests still hold.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
After Effects tints Black & White's gray like a Color blend: the tint colour's
hue and saturation at the gray's luminosity (weights 0.3 / 0.59 / 0.11, channels
outside 0..1 pulled back toward the gray). EffectCraft used the gray as HSL
lightness. Measured in AE 2026, Tint Color [1, 0.5, 0]: a red solid at Reds 10
(case 717) AE (43, 21, 0), EffectCraft was (51, 26, 0), now (43, 21, 0); a
yellow solid at the default sliders (gray 0.6, case 825) AE (255, 129, 2), now
(255, 129, 3); white stays white. The six sliders already matched AE on eight
colours (cases 816, 817). CPU and GPU.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
After Effects' Tritone weighs the working-space values with Rec. 601 (0.299,
0.587, 0.114), as its Tint does; EffectCraft used Rec. 709. Case 718 (red solid,
Highlights [1,1,0.8], Midtones [0.6,0.2,0.2], Shadows [0,0,0.3], Blend 25):
AE (132, 23, 46), EffectCraft was (113, 16, 49), now (132, 23, 46). On a grey
ramp (case 815) the shadows / midtones / highlights mapping already matched and
still does within 1/255. CPU and GPU (fx_color op 4).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
After Effects 2026 (sRGB working space, not linearised) maps red, green,
blue and 50% grey solids at Tint's defaults to 76, 150, 29 and 128/255:
Rec. 601 weights on the working-space values, not Rec. 709. CPU and GPU
kernel changed; tests pin the four greys within 1/255.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Engine part of viewer picking: replace / add / remove the top-coverage ID at a
layer-space point in one undo step, at the time the Selection was read. The
aux channels come from the render's own path (Renderer::layer_aux, shared with
the effect host; footage at its source time, 3D precomps) through a renderer
set up like Session::render (expressions, render prefs, layer cache). An
optional scale snaps the point to the pixel a preview at that resolution
samples. New effects::crypto_select quotes names and falls back to <hex> for
unnamed, wildcard-looking or ambiguous names. effect.cryptomatteAt is the
read-only hover query.
Resolve conflicts in the Effects & Presets panel, the arrow-key nudge and the
docs; update two a11y tests to the prefs-based favourites.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Upstream now translates the Timeline, Composition and Effect Controls context menus itself, so
command_label is left for the dock's tab titles and the workspace bar, on menu_catalog.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01YMTAbGNRxnMEzRvYnQGphF
A terminal already gets a live `[1/1] frame 16/180 ... ~14.2s left` line while
`effectcraft-cli render` runs. A program that starts the CLI (FilmCraft runs it to
render a composition for a clip) reads stderr through a pipe, so it saw nothing
until the render ended.
`--progress` prints one line per update instead, at most four a second:
progress <frames done> <frames total> <seconds elapsed> <seconds left, or - when unknown>
It has no effect on a terminal, which keeps its live line. Without the flag
nothing changes.
Documented in the usage text, the module header and docs/agents.md.
Tests: cargo fmt --check and cargo clippy --all-targets -D warnings pass; the
effectcraft-cli tests pass except render_out_is_relative_to_the_working_directory,
which already fails on Windows (it compares a canonicalize()d `\?\` path with the
path the CLI prints) and is unrelated to this change.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Runs every scenario N times (default 1, unchanged). Every run is still
appended to results.jsonl; with N > 1 one "kind": "summary" row per key
follows, whose metrics are the medians of the successful runs (user_s and
sys_s included, byte/instruction counts rounded) and whose summary holds
median, p90 (nearest rank, = max for N < 10), min and max. A failed run marks
the summary failed so the gate refuses it.
--compare uses the latest row per key; the table labels each side "median
of N" or "1 run" and warns when they differ, and --fail-over refuses such
keys. --repeat with --with is rejected. docs/testing.md documents the format.
`path.convertToBezier` only cleared `roto_bezier` on mask groups, so on a shape
layer it did nothing at all: a Rectangle, Ellipse or Polystar path stayed
parametric and its vertices could not be edited or animated. In After Effects
the command replaces such a path with an editable Path 1 of the same geometry.
The geometry is not re-derived. `parametric_path` calls the same
`effectcraft_path::{rect, ellipse, polystar}` functions `render::shapes::collect`
calls, with the same defaults for a property a group doesn't carry, so the path
that comes out is the shape that was on screen; `from_kurbo` and
`build::shape_path` then make an ordinary Path 1.
Masks are unchanged: shape items take precedence when selected, and with none
selected the command falls through to the old mask behaviour. Path Direction is
carried over rather than reset, since reversing a path is a separate command,
and the new path is left selected so its vertices can be edited straight away.
The parametric properties are read at the current time and the result is a
static path: a Size or Roundness animation cannot survive becoming a vertex
list, in After Effects either. Undo restores the parametric shape.
Add Layer Styles submenu to the Timeline and Composition viewer layer context menu, matching After Effects parity and the application Layer ▸ Layer Styles menu.
- Adds Layer Styles submenu between Blending Mode and Effects
- Exposes Layer Style Options..., Convert to Editable Styles, Show All, Remove All, and the 9 individual styles
- Translates Layer Styles across all 7 UI catalogs
- Adds regression test verifying submenu presence, position, and action invocation
The After Effects stagger idiom
id = thisProperty.propertyGroup(2).propertyIndex;
failed with "not a callable function": the expression object model had
no propertyGroup() and property groups had no propertyIndex.
- Property.propertyGroup(countUp = 1) and PropertyGroup.propertyGroup()
return the group countUp levels up; from a top-level group they reach
the layer. A count below 1, not a number, or above the layer is an
error naming propertyGroup, never a crash.
- PropertyGroup.propertyIndex: the group's 1-based index among its
siblings (Child requests now carry it).
- One new host request (Ancestor) walks up from the node's full uid
path, so it also works for the property being evaluated.
- Tests for the stagger expression, effect parameters, reaching the
layer, other layers' properties and groups and out-of-range counts;
the fuzzer seeds and tokens include the new members.
Load PDF document objects through the pinned craft-pdf parser and convert them into EffectCraft's existing drawing model with bounded traversal, recovery and retained data. Preserve generation numbers, stream limits, encrypted-document refusal and reported repairs.
Retain app-owned drawing, EPS, fonts and content/image decoding. Assert early excessive-nesting rejection without partial art, and cover tolerant arrays on native and WASM.
Validated with the22-stage local matrix and exact-head FreeBSD, Windows ARM64 and packaging checks.
Co-authored-by: Codex <noreply@openai.com>
